Domotic House Energy Monitor Made by: Alessandro Farina &
Emanuele Favaloro Source/Fonte: Bwired.nl
Slide 3
Energy Monitor Real-time Electricity Monitoring updated once
every minute. We were consuming about 10.000 kWh a year, way too
much! For years I was thinking about a plan to measure the
electricity automatically. With this little project I was able to
reduce the electricity from 10.000kWh to 6000kWh. Because of the
accurate and minute by minute reading of electricity consumption I
became much more aware of it all. I found out that I was consuming
0.600 kWh at night! With simple things like unplugging adapters of
my cellular (GSM) and kill standby of the harddiskrecorder,
computers and television I was able to reduce the power to around
320 Watts. I also discovered that there are a lot of power adapters
which consume a lot of energy with doing nothing, so I use now
switching power adapters which have a high performance and so
consume much less energy. The energy monitor is automatically
plugged in my Home Control System which adds nice little features
like for example getting a mail on your cellular (GSM) if the power
consumption is higher then 500 Watt and there is no one at home.
Real-time Electricity Monitoring. A infrared-sensor is optical
connected to the flashing led on the electricity meter of the power
company and reads the total consumption we use. The led on the
meter flashes 480 times for every Kilowatt (kW). The pulse is
counted with the RFXmeter from RFXCOM and once every 30 seconds my
home automation system receives wireless the amount of pulses
counted. All the data is saved in a SQL database which I can query
and display on the webpage's. If you want the exact schematics
click on the link above or on the image below.
Slide 4
Monitor Energetico Il monitoraggio elettrico in tempo reale
viene aggiornato ogni minuto. Noi consumiamo ogni anno circa 10.000
KWh, un po troppo! Per anni ho pensato a un piano per misurare
lelettricit automaticamente. Con questo piccolo progetto ho potuto
ridurre il consumo di elettricit da 10.000 KWh a 6.000 KWh. Perch a
causa dellaccurata lettura del consumo di elettricit sono diventato
molto pi consapevole di tutto questo. Ho scoperto che stavo
consumando 0.600 KWh a notte! Con semplici cose come scollegare gli
alimentatoridel mio cellulare (GSM) e spegnere lo standby del
registratore hard disk, del computer e del televisore sono stato
capace di ridurre la potenza di circa 320 Watt. Ho anche scoperto
che c molta potenza utilizzata dagli alimentatori, che consumano un
sacco di energia senza fare niente, cosi adesso uso degli
alimentatori-interruttori che hanno elevate prestazioni e consumano
meno energia. Il monitoraggio energetico collegatoautomaticamente
al mio Home Control System che aggiunge delle buone caratteristiche
come per esempio ricevere una mail sul tuo cellulare (GSM) se la
potenza consumata superiore di 500 Watt e non c nessuno a casa. Il
monitoraggio elettrico in tempo reale a sensori infrarossi
otticamente collegato al led lampeggiante del contatore elettrico
della compagnia energetica e legge il nostro consumo totale. Il led
sul contatore lampeggia 480 volte per ogni Kilowatt (KW). Limpulso
viene contato con il contatore RFX dal RFXCOM e una volta ogni 30
secondi il mio sistema automatizzato di casa riceve via aerea il
numero di impulsi contati. Tutti i dati sono salvati su un database
SQL che io posso consultare e mostrare sulla mia pagina web.