www.intertec.info

Doors – Latching Systems

SD512-5en Doors – Latching Systems page 1/5

1. For cabinets (un-manned)

Locking systems BASIC CLASSIC

Type 1: (1) Classic cabinet locking system • stainless steel• 5 mm slotted key or

7 mm square key• optional with

Square/tringular key

● ○

Type 2: • swivel handle• black polyamide• equipped w. half profile cylinder

(40 mm length) according to DIN 18252

● ●

Type 3: • swivel handle• stainless steel• equipped w. half profile cylinder

(40 mm length) according to DIN 18252

○ ○

Type 4: (1) • lever handle (Canada)• door latching system non

lockable• optional with padlock

○ ○

Type 5: (1) • lever handle (Canada)• stainless steel• door latching system non

lockable • optional with padlock

○ ○

Type 6: Used if two different key types are needed • swivel handle• for 2 half profile cylinder (HPC)• for 40/45 mm HPC

○ ○

● = standard ○ = optional ─ = not available(1) also for frame window

www.intertec.info

Doors – Latching Systems

SD512-5en Doors – Latching Systems page 2/5

For cabinets (un-manned)

Locking systems (continued) BASIC CLASSIC

Type 7: • swivel handle• for 45 mm half profile cylinder• best solution for a large number

of in-house locking systems ○ ○

● = standard ○ = optional ─ = not available

Latching systems

Three-point latching system Double door latching system Multi-point latching system • For EEx p• Only in combination with

locking system Type 2

www.intertec.info

Doors – Latching Systems

SD512-5en Doors – Latching Systems page 3/5

2. For walk-in houses and cabinets

Note: Self-closing and lockable doors have to be used when accessing closed electrical service locations. Access doors must: - swing outwards (in escape direction)- can be opened from inside without a key at any time

Note 1: The requirements are not applicable, if the door is permanently opened during service andmaintenance and the cabinet cannot be manned.

- a security lock is used(according to DIN VDE 0100-731:2014-10, 731.729)

INTERTEC locking systems meet the requirements according to DIN EN 1125.

Equipped with…

• three-point latching system• safety profile cylinder• door handle outside• panic bar inside (equipped with double doors one panic bar for each door)• threshold protection inside

CLASSIC ARCTIC Handle • Non-metallic w. 2 rosettes

• 60 mm half profile cylinder• Non-metallic• 40 mm half profile cylinder

• Stainless steel (SS316)• 40 mm half profile cylinder

Panic bar • Galvanized steel • Galvanized steel • Stainless steel (SS316)

Threshold protection

• Stainless steel (SS316)

www.intertec.info

Doors – Latching Systems

SD512-5en Doors – Latching Systems page 4/5

For walk-in houses and cabinets

CLASSIC ARCTIC

Handle

Non-metallic ● ─

Galvanized steel ○ ●

Stainless steel (SS316) ○ ○

Panic bar Galvanized steel ● ●

Stainless steel (SS316) ○ ○ Threshold protection (inside) Stainless steel (SS316) ● ●

● = standard ○ = optional ─ = not available

3. For HOT BOX

Locking system

• lever handle and catch in stainless steel(1.4308)

• for single and double door design• for HOT BOX only!

www.intertec.info

Doors – Latching Systems

SD512-5en Doors – Latching Systems page 5/5

4. For MINICAB 44 and frame window

Locking systems

Type 1M • slotted key

●

Type 2M • hex handle

○

Type 3M • lever handle• door latching system non lockable ○

Type 4M • lever handle• lockable ○

Type 5M • lever handle• lockable with optional padlock ○

Type 6M • T-handle• door latching system non lockable ○

Type 7M • T-handle• lockable ○

Type 8M • compact handle• lockable with optional half profile

cylinder (HPC) ○

● = standard ○ = optional ─ = not available