1. Unique identification code of the product-type: single casement wood-aluminium window

2. Type, batch or serial number or any other element allowing identification of the construction product as required: type COMFORT 3Q

3. Intended use or uses of the construction product, in accordance with the applicable harmonised technical specification, as foreseen by the manufacturer: window for private and public buildings

4. Name, registered trade name or registered trade mark and contact address of the

manufacturer: M SORA d.d., Trg svobode 2, 4226 Žiri, Slovenija

5. System or systems of assessment and verification of constancy of performance of

the construction product: system 3

6. In case of the declaration of performance concerning a construction product covered by a harmonised standard 14351-1:2006 testing was performed by: IFT Rosenheim under system 3 and issued test reports.

7. Declared performance

Essential characteristics ClassHarmonised technical

specification

Resistance to wind load C2/B3 EN 12210

Watertightness 8A EN12208

Air permeability 4 EN 12207

Mechanical durability 2 EN 12400

Resistance to racking 1 EN13115

Resistance to static torsion 4 EN 13115

8. The performance of the product identified in points 1. in 2. is in conformity with the declared performance in point 7. This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4.

Signed for and on behalf of

M SORA d.d.:

Žiri, 1.7.2013

dr. Aleš Ugovšek, Project manager

DECLARATION OF PERFORMANCE DOP-MS-11.1