Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
W 0-65857-18950-6 White
DORELLiving
LOFT BED WITH DESKModel Number: UPC Code: Color:
DA6580 0-65857-17353-6 EspressoDA6580
Congratulations on your latest furniture purchase! Dorel Living furniture has beendeveloped with quality, convenience and style in mind. We trust it will provide you withmany years of exceptional comfort and service.
Before beginning assembly, we encourage you to familiarize yourself with your newfurniture piece by taking a few minutes to go through this booklet. It contains importantinformation on our warranty and care tips to keep your furniture looking as good as new.
For more great furniture ideas, check out our website at www.dorelliving.comYou can also keep up to date on all the latest trends by liking our Facebook pageand Instagram page.
Date of Purchase: / / Lot Number:(located on carton)
Questions, concerns, missing parts? Customer satisfaction is important to us at DorelAsia. CONTACT OUR CUSTOMER SERVICE DEPARTMENT BEFORE RETURNING
PRODUCT TO THE RETAILER.
Our agents are available Monday to Friday 8am to 5pm (EST) to take your call andanswer any questions. For faster service, always have the model number ready when
contacting us.toll free #: 1-800-295-1980
You can also reach us by email or by visiting our website and clicking on the Support tab:[email protected]
NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETYINFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
-SIL
37 1/2" - 38 1/2"
DA6580-SIL/DA6580W
38 PCS
LOFT BED WITH DESK
HARDWARE LIST1
0
<£ 1/4" x 100mm
2
6)) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) )Tm)ymy)
CD 1/4" x 48mm
JOINT CONNECTOR (4mm HEX HEAD) JOINT CONNECTOR (4mm HEX HEAD)12 PCS
3
(j£pymy >
<t> 3.5mm x 19mm
4
CD 4mm x 35mm
FLAT HEAD SCREW2 PCS
FLAT HEAD SCREW26 PCS
5
0 11.8mm x 15mm
6
CD 4mm x 30mm
BARREL NUT12 PCS
FLAT HEAD SCREW6 PCS
7
L
CD 10mm x 50mm
WOOD DOWEL44 PCS
8
ALLEN KEY1 PC
LOFT BED WITH DESK
HARDWARE LIST9
0 L L L L
<f 1/4" x 64mm
10
\
O 8mm x 30mm
JOINT CONNECTOR (4mm HEX HEAD)7 PCS
WOOD DOWEL2 PCS
11
0
<t> 1/4" x 32mm
12
<t> 9mm x 17mm
JOINT CONNECTOR (4mm HEX HEAD)4 PCS
HEX CAP2 PCS
13
0
O 1/4" x 15mm
14
30mm x 30mm x 18mm
JOINT CONNECTOR (4mm HEX HEAD)12 PCS
L SHAPED METAL PLATE6 PCS
DA6580-SIL/DA6580W
LOFT BED WITH DESK
PARTS LISTA fij*s
I
s'
B:
V
S
I
S
t
I
s'
C I::
:
>
LEFT FRONT POST1 PC
LEFT BACK POST1 PC
RIGHT BACK POST1 PC
D fi
S
>
s'
E F
RIGHT FRONT POST1PC
HEADBOARD CROSS6 PCS
HEADBOARD CENTER CROSS1 PC
©©© ©
©©©
©©©
©©
© ©&
©©
©Q>©
/ s
Vr
-1©©© -J
<u>©
A-1
©\ /\\ back view
DA6580-SIL/DA6580W
LOFT BED WITH DESK
PARTS LISTG H I
HEADBOARD CENTER CROSS1 PC
HEADBOARD PANEL4 PCS
FRONT SIDE RAIL1 PC
J K L
BACK SIDE RAIL1 PC
DESK FRONT RAIL1PC
SLAT13 PCS
M N O
LONG GUARDRAIL1 PC
SHORT GUARDRAIL1 PC
LEFT LADDER END1 PC
P Q R
RIGHT LADDER END1 PC
LADDER STEP5 PCS
GUARDRAIL LEG2 PCS
DA6580-SIL/DA6580W
LOFT BED WITH DESK
PARTS LISTS T U
SHORT GUARDRAIL POST1 PC
DESK PANEL1 PC
DESK BACK RAIL1 PC
V w X
BOTTOM BACK GUARDRAIL1 PC
BOTTOM BACK SIDE RAIL1 PC
SUPPORT POST1 PC
Y
SPACE BLOCK2 PCS
DA6580-SIL/DA6580W
LOFT BED WITH DESK
0
© A
©
©. ©r
0
©
r®groove
% i-Qr -' i)
,1
2 holes
F
® ®r
©
®
Jb
&
JHJb
Jb
0
00
YY
oo
00
YY
- ®groove
0
0
The 2 holes on cross(F) face the same
direction as the grooveson posts ( A & B).
\
/
8 PCS
0
0 8 PCS1
One of the headboard crosses (E) has a warning label on it. Do not use it in this step.Insert wood dowels (7) into the ends of headboard cross (E) and headboard center cross (F).Insert headboard panel (H) into the grooves of the headboard cross (E) and headboard center cross(F).Attach the assembled headboard (EHE) and (FHE) to left front post (A) and left back post (B) withjoint connectors (1) as shown. Use Allen key (8) to tighten the joint connectors (1).
DA6580-SIL/DA6580W
LOFT BED WITH DESK
warning label ©=7
<7
©
©
A
00
00
groove 2 holes
o
<ZL
©0/0
©©
r
©'©
x>A
-s>A
-0J&
^tgroove
^t
©
The 2 holes on cross(G) face the same
direction as the grooveson posts ( C & D).5^ £•
©\
/
8 PCS
\ \ \ \ \ \ \ \0
8 PCS
STEP 2Use the headboard cross (E) with warning label in this step.Insert wood dowels (7) into the ends of headboard cross (E) and headboard center cross (G).Insert headboard panel (H) into the grooves of the headboard cross (E) and headboard center cross(G).Attach the assembled headboard (EHE) and (GHE) to right back post (C) and right front post (D)
0
0
)
®
0
©
©
with joint connectors (1) as shown. Use Allen key (8) to tighten the joint connectors (1).
DA6580-SIL/DA6580W
LOFT BED WITH DESK
S:
5:
M)
©N
© Ho es on this side :>©5:
©©0 "s
7
©i
N'-S
G o.x
2
\ \ \0 / / / ©© 2 PCS
\
©© 10 PCS
\0 / / /
8 PCSSTEP 3Do not fully tighten bolts in this step, this will facilitate assembly in the following steps.Insert wood dowel (7) into each end of the long guardrails (M), desk back rail (U) and bottomback guardrail (V).Attach long guardrails (M), desk back rail (U) and bottom back guardrail (V) to back posts (B and
Insert wood dowel (7) into each end of the desk front rail (K).Attach desk front rail (K) to headboard center crosses (F and G) with joint connectors (2)and Allen key (8) as shown.
)
)
)
)
)
)
)
)
)
C) with joint connectors (3) and Allen key (8) as shown.
Attach desk front rail (K) to headboard center crosses (F and G) with joint connectors (2)
DA6580-SIL/DA6580W
LOFT BED WITH DESK
50
©Jr\ 5
&©
&
©© <S>
© &
© 6* V.©9
m©/
-«s>
© 's
$
>s®r\$© 5
/
© //
//
//
© //
//
//
\ /
<B>BackView
@ ))))))))))))))))))))))))))))))))))))))))))))))))))))
© 12 PCSSTEP 4
© 12 PCS
Insert barrel nuts (5) into top front side rail (I).Attach top front side rail (I) to front posts (A & D) with joint connectors (1) as shown.
Insert barrel nut (5) into top back side rail (J) and bottom back side rail (W).Attach top back side rail (J) and bottom back side rail (W) to back posts (B & C) with jointconnectors (1) as shown.Tighten joint connectors (1) with the Allen key (8).
DA6580-SIL/DA6580W
LOFT BED WITH DESK
CD,
EN)
0)/
/*
©»;
0
© 2 PCS
\ \ \ \ \0© 12) 2 PCS4 PCS
\
/
2 PCS
\ \ \ \02 PCS
STEP 5Insert wood dowel (10) into holes of the short guardrails (N) and attach it to short guardrail post(S) with joint connectors (11) and Allen key (8).
Insert wood dowel (7) into end of the short guardrails (N) an attach it to left front post (A) withjoint connectors (3).
Attach the short guardrail post (S) to top front side rail (I) with joint connectors (11) and hex cap(12) as shown. Fully tighten the joint connectors (11) with the Allen key (8).
©
©©
DA6580-SIL/DA6580W
LOFT BED WITH DESK
-
-
a
a
t
©9© ©9
r ®(D m
0)M3 PCS
STEP 6Attach support post (X) to desk back rail (U), bottom back guardrail (V) and bottom back side rail(W) with joint connectors (9) as shown. Tighten joint connectors (9) with the Allen key (8).
DA6580-SIL/DA6580W
LOFT BED WITH DESK
a
7
7A
70 0) 0A
© P 13) 0-
0 ©©
<Q> 007
\ 0/
0 6 PCS©6 PCS 6 PCS
STEP 7Insert wood dowels (7) into the holes of desk front rail (K), desk back rail (U) and support post(X).
Attach the L shaped metal plate (14) to support post (X) and desk back rail (U) as shown aboveusing joint connectors (13) and Allen key (8).
DA6580-SIL/DA6580W
LOFT BED WITH DESK
STEP 8
T
(g) a
0 aoA
0 i ©i 00 * ?
T
) (D3 0 9A9
(S
\ \ \ > \\0 J u
© 6 PCS
View fromunderneath
the desk
\ \\ \\ \ \ \\0 J n n n n n n
4 PCS
Attach desk panel (T) to the assembled unit and secure it to desktop front rail (K) with jointconnectors (9) as shown.Secure the desk panel (T) to support post (X) and desk back rail (U) using joint connectors (13)through metal plates (14).Tighten joint connectors (9 & 13) using Allen key (8).
NOTE: Fully tighten all joint connector installed in previous steps.
DA6580-SIL/DA6580W
LOFT BED WITH DESK
®SPACE BLOCK: 2PCS© ONE PER SIDE
I ©^
T © _T © _
©I © |PHILLIPS
] © ISCREWDRIVER
©I ©^I ©
_©f ©
I
© 44
44
4 J44
44
44
4©
© 26 PCS
STEP 9Attach a slat (L) onto top side rails (I & J) of the top bunk with flat head screws (4). Make sure theslat touches the corner posts (as close to the headboard as possible). Attach the other slats (L)onto the top side rails (I & J) with flat head screws (4). Use space block (Y) to space them outevenly as shown. Use Phillips screwdriver (not included) to tighten flat head screws (4).
NOTE: If you notice that any of the slats (L) are not perfectly flat, be sure to attach them so thatthe slats (L) curves up in the middle and down on the ends.
DA6580-SIL/DA6580W
LOFT BED WITH DESK
©&
a
©v ©9.9
©0
a
© © 0 oft ©5$a© ®X ®8 0 5
ft ©CJ
®O ® s0 x9
©©0 x5
©©X©p
\ \ \ \ \ \0 /) / / ) /
© 10 PCS
/
© 10 PCS
STEP 10To assemble the ladder, insert wood dowels (7) into the ends of the ladder steps (Q).Attach left ladder end (O) and right ladder end (P) to ladder steps (Q) with wood joint connectors(2). Tighten the wood joint connectors (2) with the Allen key (8).
DA6580-SIL/DA6580W
LOFT BED WITH DESK
i
i66
6AT
66
8
6
0
c
© 2 PCS6 PCSSTEP 11Attach the ladder to the top front side rail (I) with flat head screw ( ) as shown. Use Phillipsscrewdriver (not included) to tighten flat head screws ( ).
Attach the guardrail leg (R) to the short guardrail (N) and top front side rail (I) with flat head screws(6). Attach another guardrail leg (R) (on the other side of the bed) to long guardrail (M) and topback side rail (J) with flat head screws (6) as shown. Use Phillips screwdriver (not included) totighten flat head screws (6).
DA6580-SIL/DA6580W
LOFT BED WITH DESK
/j\ CAUTION: This unit is intended for use only with the productsand/or maximum weights indicated. Use with other products
and/or products heavier than the maximum weights indicated mayresult in instability or cause possible injury.
DO NOT ALLOW HORSEPLAY ONOR UNDER THE BED ANDPROHIBIT JUMPING ON THEBED.
;
DO NOT ALLOW CHILDREN UNDER 6YEARS OF AGE TO USE THE UPPERBUNK. BED IS DESIGNED FORCHILDREN RANGING FROM 6 YEARS OFAGE TO YOUNG TEENAGERS.
USE ONLY A MATTRESS WHICH IS74"-75" LONG AND 1/2" - 38 1/2"WIDE ON BUNK. ENSURETHICKNESS OF MATTRESS DOES NOTEXCEED 6".
MAXIMUM WEIGHT CAPACITY:- 165 LBS (75KGS) ON UPPER BUNK- 100 LBS ON DESK
That's it! You've finished assembling your loft bed.
DO NOT RETURN PRODUCT TO THE STORE.If a part is missing or damaged, contact our customerservice department. We will replace the part FREE of
charge.
m Tel #: 1-800-295-1980E-Mail: [email protected]
DA6580-SIL/DA6580W