Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
JV100 to be placed incentre of the joist
All joists @ 400mm crs
Screwing in CornersFix with 14 SS 14G x88mm hex headscrews
Screwing Nog to JoistRefer to diagram 3
Screwing Double BorderJoist to Joist/NogRefer to diagram 2
All nogs@400mmcrs
*All fasteners must be 316 stainless steel
Fix with 14 SS14g x 88mmHex Head Screws(Shown as dark)
J-Vice installmentin corner
Double boundaryjoist to nog/joist
Single joist to nog
Fix with 4 SS14g x 88mmHex Head Screws(Shown as dark)
Fix with 10 SS14g x 44mm
Hex Head Screws(Shown as light)
Fix with 14 SS14g x 44mmHex Head Screws(Shown as light)
Suits Joist Sizes
140 x 45mm190 x 45mm
240 x 45mm
290 x 45mm
This page applies to Glass Vice System - Top/ side fix Clearline balustrade system andSouthern Lites (Side Fix) Balustrade system
Note: boundaryjoist overlaparrangement
Typical Double Boundary Joist Timber Deck Construction DetailsAlternative solution to NZS 3604:2011 7.4.1.3
detailed to resist twisting of the boundary joist and joist hanger.Deck designer to ensure the structure can support the appropriate horizontal and vertical loads.
1
2
3
1
2 3
2
Double
All joists @ 400mm crs
Screwing in CornersFix with 14 SS 14G x125mm hex headscrews
Refer to diagram 2 forfixing detail for a triplejoist
JV100 to be placed incentre of the joist
Fix with 14 SS14g x 125mmHex Head Screws(Shown as dark)
Fix with 4 SS14g x 125mmHex Head Screws(Shown as dark)
Fix with 10 SS14g x 44mmHex Head Screws(Shown as light)
JV100 Triple joist corner detail
Triple boundary joist to nog/joist
Fix with 14 SS14g x 44mmHex Head Screws(Shown as light)
Single joist to nog/joist
Max
imum
spa
n of
120
0 to
pos
t cen
tres
All nogs@400mmcrs
This page applies to Glass Vice System - Top fix Barrier systems
Typical Triple Boundary Joist Timber Deck Construction DetailsAlternative solution to NZS 3604:2011 7.4.1.3
detailed to resist twisting of the boundary joist and joist hanger.Deck designer to ensure the structure can support the appropriate horizontal and vertical loads.
1
2
3
1
2 3
2
2
*All fasteners must be 316 stainless steel
Triple