Double Glazed 102mm - Open Windows & Door · 2017-07-04 · Double Glaze 102mm. External view. * Subject to individual site conditions and wind loads. Contact AWS Technical Support

Ser ies 424

CentreGLAZE™ FramingDouble Glazed 102mm

DATE: MAY 2013 | REPLACES: MARCH 2008

Photo courtesy of All Weather Windows

CO

MM

ER

CIA

L S

ER

IES

MORE INFORMATION For the latest updates regarding this product visit our website www.elevatealuminium.com.au/424

2D & 3D CAD FIlEs AvAIlAblE To access 2D &3D CAD models visit our online specifier resource centrewww.specifyaws.com.au/CAD

KEY FEATUREs/PERFORMANCE CHARACTERIsTICs

Maximum Glass Thickness ≤28mm

• Series 424 CentreGLAZE™ shopfront framing measures 102mm x

50mm and has been designed specifically to accept 24mm Insulating

Glass Units (IGUs).

• The 28mm deep glazing pocket is designed to accept thick heavy

IGUs and allows glass to be installed easily with room to spare

(catering for glass manufacturing tolerance).

• This deep glazing pocket provides a 12mm bite as required by the

IGU manufacturers and ensures compliance with glass warranties.

• Reinforced tall glazing bead at sill tolerates high negative wind loads.

• The captive wedge also offers increased security.

• Glazing wedges are recessed into the framing for a clean appearance.

• Wide range of sub-sills to cover most installations, including sub-sills

with integrated nailing fin ideal for residential installations.

• Sub-head and two piece sub-jambs.

• Numerous door thresholds including weather resisting thresholds

for external and internal swing doors.

• Designed for use with Series 52 commercial doors.

• Compatible with Commercial and Architectural Series systems.

• Designed to go into residential applications (brick veneer or cavity

brick walls) using our custom nailing fin head, jambs and nailing fin

sub sill.Series 424 CentreGLAZE™ FramingDouble Glaze 102mm. External view.

* Subject to individual site conditions and wind loads. Contact AWS Technical Support for more information, email [email protected]

DATE: NOV 12REPLACES: MARCH 08SCALE: NOT TO SCALE

CO

MM

ER

FIA

L F

RA

MIN

G©

Arc

hite

ctur

al W

indo

w S

yste

ms

Pty

Ltd

199

6-20

13

Ser ies 424

CentreGLAZE™ Double Glazed Framing

WERs RATINGs

HOW TO sPECIFY

Specification Assistance

Need help specifying this product? Email [email protected] and our qualified technical advisors will assist you with product selection and specification for your project.

sYsTEM NAME

Elevate™ Aluminium Systems Series

424 Double Glazed CentreGLAZE™

Framing

FINIsH

Powder Coat

Anodised

COlOUR

Select from the AWS range of approved

powder coat or anodising colours

GlAss

Specify thickness ≤ 24mm

Specify thermal performance where

applicable (Uv & SHGC)

Specify acoustic performance where

applicable (RW)


Double Glazed Window ID Glass Type Uw sHGCw Tvw InfAWS-028-01 4SnClr/10/4 3.01 0.48 0.54 0.00

AWS-028-02 4SnClr/10Ar/4 2.79 0.47 0.54 0.00

AWS-028-03 6.38LamClr/12/6 3.35 0.62 0.70 0.00

AWS-028-04 6.38LamClr/12Ar/6 3.23 0.62 0.70 0.00

AWS-028-05 6.38SnClr/12/6 2.90 0.46 0.53 0.00

AWS-028-06 6.38SnClr/12Ar/6 2.71 0.46 0.53 0.00

AWS-028-07 6.38CPClr/8/4 2.99 0.39 0.31 0.00

AWS-028-08 6.38CPClr/8Ar/4 2.69 0.54 0.65 0.00

AWS-028-09 6.38CPClr/12/6 2.70 0.54 0.64 0.00

AWS-028-10 6.38CPClr/12Ar/6 2.49 0.54 0.64 0.00

AWS-028-11 6.38CPGy/8/4 2.99 0.39 0.31 0.00

AWS-028-12 6.38CPGy/8Ar/4 2.70 0.38 0.31 0.00

AWS-028-13 6.38CPGy/12/6 2.70 0.54 0.64 0.00

AWS-028-14 6.38CPGy/12Ar/6 2.50 0.37 0.31 0.00

AWS-028-15 6.38LamSpGy/12/6 3.36 0.22 0.10 0.00

AWS-028-16 6.38LamSpGy/12Ar/6 3.23 0.21 0.10 0.00

AWS-028-17 6.38SnGy/12/6 2.86 0.45 0.53 0.00

AWS-028-18 6.38SnGy/12Ar/6 2.68 0.44 0.53 0.00

AWS-028-19 6.38TLam/12/6 3.36 0.28 0.26 0.00

AWS-028-20 6.38TLam/12Ar/6 3.23 0.27 0.26 0.00

AWS-028-21 6SnClr/12/6 2.90 0.46 0.53 0.00

AWS-028-22 6SnClr/12Ar/6 2.71 0.46 0.53 0.00

AWS-028-23 6EVanClr/12/6 3.35 0.50 0.53 0.00

AWS-028-24 6EVanClr/12Ar/6 3.23 0.50 0.53 0.00

AWS-028-25 6EVanGy/12/6 2.79 0.31 0.25 0.00

AWS-028-26 6EVanGy/12Ar/6 2.58 0.30 0.25 0.00

AWS-028-27 10.50LamClr/8/6 3.49 0.47 0.53 0.00

AWS-028-28 10.50LamClr/8Ar/6 3.32 0.46 0.53 0.00

AWS-028-29 10.50SnClr/8/6 3.09 0.43 0.52 0.00

AWS-028-30 10.50SnClr/8Ar/6 2.84 0.42 0.52 0.00

AWS-028-31 10.50LamGy/8/6 3.49 0.17 0.09 0.00

AWS-028-32 10.50LamGy/8Ar/6 3.32 0.16 0.09 0.00

AWS-028-33 10.50TLam/8/6 2.94 0.40 0.47 0.00

NOTEs1. Uw is the whole window U-value2. SHGCw is the whole window solar heat gain coefficient3. Tvw is the whole window visible (light) transmittance4. Maximum air infiltration is 5.0L/s.m2 at a positive pressure difference of 75 Pa as measured according to AS 20475. Static performance (Uw SHGCw Tvw Tdw) calculated using Window 6.3 and Therm 6.3 software (LBNL), 1999-20106. Results disclosed at Australian Fenestration Rating Council (AFRC) regulations.7. Ratings for use with Section J of the Building Code of Australia - Class 2-9

For the latest WERs data for this system visit www.wers.net

sOUND REDUCTION

A number of glass combinations have been tested with this system to acheive sound reduction numbers listed below.

Glass Description Rating6mm tgh /12mm air / 6.50mm VLam Hush Rw36

8.5mm VLam Hush /10mm air / 6.50mm VLam Hush Rw39

CO

MM

ER

CIA

L F

RA

MIN

G©

Arc

hite

ctur

al W

indo

w S

yste

ms

Pty

Ltd

199

6-20

13

Ser ies 424


PAGE | 1.153


DEsIGN FEATUREs

102 x 50mm Fixed framing designed to accept 24mm Insulating Glass Units (IGU's).Matching sub-frames complete the installation package.

CO

MM

ER

FIA

L F

RA

MIN

G©

Arc

hite

ctur

al W

indo

w S

yste

ms

Pty

Ltd

199

6-20

13

Ser ies 424


• Frame and glazing pocket designed to accept 24mm insulating glass units (IGUs) with required 12mm bite plus another 4mm to cater for glass production and installation tolerances.

• Compatible with a large range of other Elevate™ framing systems, including sliding and bi-fold doors.

• Snap together and interlocking expansion mullions.

• Matching 50mm thick hinged, pivot or sliding door designed to accept 24mm thick double glazing and a large variety of industry standard hardware.

• Two fully beaded midrail sizes to choose from (125mm and 200mm deep).

• Concealed overhead transom also designed to accept 24mm IGUs.

• We can insert awning sashes into the framing if required. These sashes will also accept 24mm IGUs.

• Nailing fin frame option suitable for residential applications.

limitations:

• There is a sub-head, sub-jamb and sub-sill treatment to choose from to improve the weather performance. But please note dry glazed shopfront framing is not recommended for extreme exposed locations.

• Allow for mullion expansion on units that are subject to thermal movement.

• Door glazed with 24mm IGUs will be heavy and this may limit the overall panel size.

Compatibility:

We have designed a number of compatible framing suites that can be coupled or used together:• Series 426 FrontGLAZE™ double glazed framing (102mm wide).• Series 407 FACELINE™ framing (102mm wide).• Series 410 Bi-fold doors and windows.• Series 411 Bi-fold doors and windows.• Series 412 Bi-fold doors• Series 702 SlideMASTER™ high performance sliding door (102mm wide).• Series 704 SlideMASTER™ architectural sliding door (102mm wide).• Architectural Commercial windows Series 461 to 467.

DEsIGN FEATUREs


CO

MM

ER

CIA

L F

RA

MIN

G©

Arc

hite

ctur

al W

indo

w S

yste

ms

Pty

Ltd

199

6-20

13

Ser ies 424


PAGE | 1.155

beaded sill

Sill also designed to give the 12mm bite:

• Reinforced glazing bead designed to resist negative forces on the glass unit.

• Full width custom glazing block.

• Heavy duty sill designed to carry heavy glass units.

• Pocketed filler also has screw splines. Two additional screw fixings halve the chances of a joint opening up.

We always recommend sub-sills under commercial framing.

We have other sub-sills, refer Installation section in Volume 2.

CAD file: DWG 424.FXD.1

FRAME DEsIGN FEATUREs

DATE: NOV 12REPLACES: MARCH 08SCALE: FULL SIZE

series 424 - 102 (101.60) x 50mm frame

The glazing pocket has been designed to be compatible with industry standard, but more importantly:

• Pocket has been designed to give us the required 12mm glass bite on Insulating Glass Units (IGU's).

• Glazing wedges are fully recessed into the frame.

• Accepts true captive glazing wedge glazing, this improves security and makes it possible on elevated situations to glaze / re-glaze without scaffolding - from the inside. This depends on the panel size. This pocket will also accept roll-in wedges or wet glazing.

• Pocketed filler also has screw splines. Two additional screw fixings halve the chances of a joint opening up.

CO

MM

ER

FIA

L F

RA

MIN

G©

Arc

hite

ctur

al W

indo

w S

yste

ms

Pty

Ltd

199

6-20

13

Ser ies 424


Matching Door

• Fully beaded 50mm thick heavy duty door stiles and rails (Series 52) designed to accept 24mm IGUs.

• The 50mm thick doors are significantly stronger that industry standard light duty 45mm thick. This allows us to make the doors higher and still comply.

• Doors will accept a large variety of industry standard commercial hardware.

• Door panels can be fitted with midrails (125mm or 200mm) that will accept 24mm IGUs.

• Available as hinged, pivot or sliding panels.

• Top and bottom rail are joined to stiles with heavy duty spigot secured to thick backing plate with high tensile bolts.

CAD file: DWG 52.DOOR

DOOR DEsIGN FEATUREs

DATE: NOV 12REPLACES: MARCH 08SCALE: FULL SIZE & NTS

311

311

CO

MM

ER

CIA

L F

RA

MIN

G©

Arc

hite

ctur

al W

indo

w S

yste

ms

Pty

Ltd

199

6-20

13

Ser ies 424


PAGE | 1.157

s = Serviceability limit state (deflection = L/250).U = Ultimate strength limit state (factored yield strength = 104 MPa).

These tables have been calculated using nominal section properties.A typical assembly has been tested as per the requirements of AS 2047.

Serviceability rating has been limited to 3333 Pa and Ultimate strength rating has been limited to 5000 Pa.

8114

0

8114

1

81140 with 81141 Ixx = 789 x 103 mm4

Iyy = 97 x 103 mm4

8114

4

8114

5

81144 with 81145 Ixx = 915 x 103 mm4

Iyy = 111 x 103 mm4

x x

y

y

Height Mullion centres mm mm 800 1000 1200 1400 1600 1800 2000

1800s 3333 3333 3333 3174 3010 2956 2956

U 5000 5000 5000 4760 4514 4434 4434

2000s 3333 3089 2697 2447 2283 2187 2155

U 5000 4702 4081 3679 3424 3280 3232

2200s 2762 2279 1973 1771 1637 1551 1503

U 4658 3825 3295 2941 2703 2547 2458

2400s 2109 1731 1489 1327 1214 1138 1088

U 3885 3177 2721 2411 2196 2046 1947

2600s 1648 1347 1153 1021 928 862 816

U 3292 2682 2288 2016 1824 1686 1588

2800s 1312 1070 912 804 727 - -

U 2825 2296 1952 1713 1542 - -

3000s 1062 864 734 - - - -

U 2452 1989 1686 - - - -

Height Mullion centres mm mm 800 1000 1200 1400 1600 1800 2000

1800s 3333 3333 3333 3333 3333 3333 3333U 5000 5000 5000 5000 5000 5000 5000

2000s 3333 3333 3294 2970 2763 2647 2609U 5000 5000 4941 4454 4145 3971 3913

2200s 3333 3087 2659 2374 2181 2056 1984U 5000 4631 3989 3561 3272 3084 2976

2400s 3017 2477 2131 1898 1737 1628 1556U 4703 3846 3294 2919 2658 2477 2357

2600s 2357 1927 1650 1461 1328 1234 1168U 3985 3247 2769 2441 2208 2041 1923

2800s 1877 1530 1305 1150 1040 959 901U 3421 2780 2363 2074 1867 1715 1604

3000s 1520 1236 1051 923 830 762 712U 2969 2408 2041 1786 1601 1464 1361

Wind Ratings (Pa) mullion 81140 and filler 81141.

Wind Ratings (Pa) mullion 81144 and filler 81145.

y

y

x x

MUllION sTRENGTH

DATE: NOV 12REPLACES: MARCH 08SCALE: HALF FULL SIZE

CO

MM

ER

FIA

L F

RA

MIN

G©

Arc

hite

ctur

al W

indo

w S

yste

ms

Pty

Ltd

199

6-20

13

Ser ies 424


PanelWidth

Pane

l Hei

ght

s = Serviceability limit state (deflection = L/250).U = Ultimate strength limit state (factored yield strength = 104 MPa).

These tables have been calculated using nominal section properties.

Pivot/wiper meeting stiles Rebated French meeting stiles

Door Meeting stile strength GuideRatings - Rebated Frenchmeeting stilesPanel Panel Ratings - Pivot meeting stiles

Height Width series 52 series 52

mm mm s U s U

2100 700 1070 3431 1416 4310

2100 800 950 3038 1256 3816

2100 900 858 2737 1135 3439

2100 1000 786 2502 1040 3143

2400 700 710 2603 939 3270

2400 800 627 2298 830 2887

2400 900 565 2064 747 2593

2400 1000 515 1879 681 2361

2600 700 555 2209 734 2775

2600 800 - - 648 2446

2600 900 - - 582 2193

2600 1000 - - 530 1994

2800 700 - - 586 2384

2800 800 - - 516 2100

2800 900 - - - -

2800 1000 - - - -

Wind Ratings (Pa) door meeting stiles.

DOOR sTRENGTH

DATE: NOV 12REPLACES: MARCH 08SCALE: HALF FULL SIZE

series 52 Doors

CO

MM

ER

CIA

L F

RA

MIN

G©

Arc

hite

ctur

al W

indo

w S

yste

ms

Pty

Ltd

199

6-20

13

Ser ies 424


PAGE | 1.159

Rebated French Meeting stiles - Series 52These rebated stiles can be used for internal opening or external opening doors.

The lock stile has been designed to accept ANDO™, ICON™ and MIRO™ lever lock and the keeper stile has been designed to accept ANDO™, ICON™ and MIRO™ twinbolt hardware as shown below and on the lock hardware pages later in these notes.

Lock stile will also accept Lockwood 3580 and Legge 995MF locks with AWS custom nylon lock keeper. The keeper stile would be fitted with finger operated flush bolts when using these types of locks.

Co-extruded Santoprene stile seals.French keeperstile

French lockstile

The ANDO™ lever lock shown highlights the multi-point option where besides the central, lock bolts are thrown into head and sill.

Note:ANDO™, ICON™ and MIRO™ lever lock sets and twinbolts are designed for residential applications.

For high traffic applications use Lockwood 3580 or Legge 995MF locks and finger operated flush bolts.

Throw bolts on lever lock, twinbolt and flushbolts are secured with custom extruded aluminium bolt guides.

Custom glass filled nylon keeper nests into the keeper stile.

CAD file: DWG 424.HGE.2

AlTERNATIvE DOOR sTIlEs - FRENCH REbATE


CO

MM

ER

FIA

L F

RA

MIN

G©

Arc

hite

ctur

al W

indo

w S

yste

ms

Pty

Ltd

199

6-20

13

Ser ies 424


Wide meeting wiper/pivot stile

Wide meeting wiper/pivot stileThis wide stile will accept Lockwood 3572 type locks as shown in the lock detail pages.

Wide hinge stile

Weatherpile door seal oralternative co-extruded Santoprene door seal.

The gap between door and frame varies depending on the hinge type used.

Series 52 door shown.


AlTERNATIvE DOOR sTIlEs - WIDE


200

We offer a heavy duty adjustable hinge that's designed to support heavy door panels.

CO

MM

ER

CIA

L F

RA

MIN

G©

Arc

hite

ctur

al W

indo

w S

yste

ms

Pty

Ltd

199

6-20

13

Ser ies 424


PAGE | 1.161

Security glazing option illustrated.

Glazing pocket drained out of the glazing area into sill/transom sump then out of the system via drainage holes.

Glazing pocket will accept 24mm thick IGUs.

Recessed glazing wedges give a significantly smarter finish to the framing. These recessed wedges are carried through to doors as illustrated earlier in these notes.

Glazing can be:• Security glazed as illustrated right, captive wedge external, roll-in

wedge internal.

• Roll-in wedges both sides.

• Silicone seal external and roll-in wedge internal.

Drainage holes allow water out of the glazing pocket area.


Top rail

Transom

FIXED/HINGED DOOR TRANsOM


Series 52 door shown

CO

MM

ER

FIA

L F

RA

MIN

G©

Arc

hite

ctur

al W

indo

w S

yste

ms

Pty

Ltd

199

6-20

13

Ser ies 424


Doors can be glazed with captive security wedge (same as framing). Other wedge options are roll-in both sides or silicone on the outside and roll-in wedge on the inside.

Australian Registered Design

Removable snap-in COC cover plate.

COC Transom

Top rail

CAD file: DWG 424.PvT.1

CONCEAlED OvERHEAD ClOsER (COC) TRANsOM



CO

MM

ER

CIA

L F

RA

MIN

G©

Arc

hite

ctur

al W

indo

w S

yste

ms

Pty

Ltd

199

6-20

13

Ser ies 424


PAGE | 1.163

Centre pivot doors with highlights require a pocketed frame similar to the frame shown right.

Doors can be security glazed as shown, with captive glazing wedge on the outside.

All centre pivot doors are fitted with weatherpile fringe seal.

Pivot stile

Jamb


Meeting stiles for pivot and hinged doors, shown below.

PIvOT DOOR JAMbs



CO

MM

ER

FIA

L F

RA

MIN

G©

Arc

hite

ctur

al W

indo

w S

yste

ms

Pty

Ltd

199

6-20

13

Ser ies 424


Internal opening hinged door

External opening hinged door

Jamb

Hinge stile

Jamb

Hinge stile


Weatherpile or co-extruded Santoprene stop seal.

Standard extruded aluminium door stop to suit 50mm thick doors.

HINGED DOOR JAMbs


The door stops can be snapped into any of the Double glazed CentreGLAZE™ frame sections.

The hinges should always be fixed to the main frame member, not the snap-in pocketed filler.

For high traffic areas we offer a concealed hinge backing plate as shown (dotted). If you feel you need this option clearly nominate when specifying.




CO

MM

ER

CIA

L F

RA

MIN

G©

Arc

hite

ctur

al W

indo

w S

yste

ms

Pty

Ltd

199

6-20

13

Ser ies 424


PAGE | 1.165

standard double ramp thresholdDesigned to be fixed direct to floor finish.NOT designed to go into sub-sills.

Alternative single ramp thresholdDesigned to be fixed to floor finish or go into sub-sill as shown left.

20mm high

28mm high

HINGED DOOR THREsHOlDs



CO

MM

ER

FIA

L F

RA

MIN

G©

Arc

hite

ctur

al W

indo

w S

yste

ms

Pty

Ltd

199

6-20

13

Ser ies 424


Electric operated winder.

Hand operated cam handles.

MIRO™ cam handle

Internally beaded sash 72838 also available.

Manual chain winder

Winders are usually fitted to allow easy fitting of flyscreens.

Polesium™ manual chain winder comes with key locking as standard. The main feature with this winder is the corrosion resistant base and stainless steel chain.

Custom winder base has screen support upstand.

Custom awning sash stop snaps into pocketed frame.

Externally beaded sash 72837

CAD file: DWG 424.AWN.1

AWNING sAsH INsERT - FACING sAsHEs

DATE: NOV 12REPLACES: MARCH 08SCALE: FULL SIZE & HALF FS

ICON™ cam handle

sOUND REDUCTION

Series 424 CentreGLAZE™ framing with an awning sash insert will acheive sound reduction numbers listed below.

Glass Description Rating6mm Toughened glass /12mm air gap / 6.50mm VLam Hush glass Rw40

8.5mm VLam Hush glass /10mm air gap / 6.50mm VLam Hush glass Rw41

24mm IGU (5mm glass / 12mm air gap / 5mm glass Rw35

NOTE: The actual tests were carried out on products very similar (Series 466 and 616) that gave these results

CO

MM

ER

CIA

L F

RA

MIN

G©

Arc

hite

ctur

al W

indo

w S

yste

ms

Pty

Ltd

199

6-20

13

Ser ies 424


PAGE | 1.167

Electric operated winder.

Hand operated cam handles.

MIRO™ cam handle

Internally beaded sash 72841 also available.

Manual chain winder

Winders are usually fitted to allow easy fitting of flyscreens.

Polesium™ manual chain winder comes with key locking as standard. The main feature with this winder is the corrosion resistant base and stainless steel chain.

Custom winder base has screen support upstand.

Custom awning sash stop snaps into pocketed frame.

Externally beaded sash 72840

CAD file: DWG 424.AWN.2

AWNING sAsH INsERT - NON-FACING sAsHEs

DATE: NOV 12REPLACES: MARCH 08SCALE: FULL SIZE & HALF FS

ICON™ cam handle

CO

MM

ER

FIA

L F

RA

MIN

G©

Arc

hite

ctur

al W

indo

w S

yste

ms

Pty

Ltd

199

6-20

13

Ser ies 424


Documents

Double Glazed 102mm - Open Windows & Door · 2017-07-04 · Double Glaze 102mm. External view. * Subject to individual site conditions and wind loads. Contact AWS Technical Support