Embed Size (px)
Citation preview
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-1
TABLE OF CONTENTS
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Elevations/Sizes: 1/4” & 1/8” Scale
Single Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Twin Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14
Triple Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21
4-Wide Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-29
5-Wide Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-31
Double-Hung Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-34
Double-Hung Transom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-44
Glazing Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-50
Jamb Extender Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-51
Standard Mullion Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-52
Lite Cut Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-54
Unit Sizing Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-56
Clear Opening Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-57
Section Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-58
W-2500
Double-Hung Windows
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-2
Clad double hung windows feature fully operating upper and lower sash.Counterbalancing is achieved with helical spring extension systems hidden inweatherable PVC jambliners. Operating units are supplied with cam-type sashlocks installed. There are several hardware finish options. Refer to theSpecifications for available finish options.
MULTIPLE ASSEMBLIESClad double hung windows may be mulled beside other clad double hungs or clad picturewindows, or below clad transom windows, to fulfill a wide variety of needs. Factory assembledmulls are limited in height (100”), width (114”), and a total area (75 square feet).
GENERAL INFORMATION
Double-Hung Windows
W-2500
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-3
ELEVATION DRAWINGS UTILIZE A LIMITED NUMBER OF PROJECTED LINES TO PRODUCE A RUDIMENTARY DRAWING INTENDEDTO BE USED IN A SMALL GRAPHICAL SCALE. ELEVATIONS ARE VIEWED PERPENDICULAR FROM THE EXTERIOR OF THESTRUCTURE. IF MORE DIMENSIONS ARE NEEDED, USE THE SECTION DRAWINGS FOR MORE COMPLETE DEPICTIONS.
’25CDH’ INDICATESW2500 CLAD DOUBLE HUNG
THE FIRST TWO NUMBERSINDICATE THE UNIT WIDTH
THE LAST TWO NUMBERS INDICATETHE UNITS HEIGHT
BOOK CODE
OUTSIDE OF FRAME.
ROUGH OPENINGDIMENSIONS ARE
IN BOLD TEXT.
Masonry Openings for Brickmould, Flat & Adams Casing.Vertical measurements include sillnose.(Subtract 1/2” from Masonry Opening for Unit Size)
Daylight OpeningFrame Size
M.O. Brickmould
Rough OpeningM.O. Adams/Flat Casing
GENERAL DOUBLE HUNG NOTES
39 1/16” [ 992 ]40 9/16” [ 1030 ]36 3/4” [ 933 ]36” [ 914 ]14 11/16” [ 373 ]
24 7/8” [ 632 ]27 7/8” [ 708 ]22 1/8” [ 562 ]21 3/8”(543)16 1/16”(408)
1. ALL UNITS SHOWN ARE AVAILABLE AS OPERATORS ONLY.
2. UNIT ELEVATIONS ARE SHOWN WITHOUT EXTERIOR TRIM.
3. ALL OPERATING SASH ARE INSTALLED WITH VINYL JAMB LINERS ANDOPERATED WITH AN INTERNAL HELICAL SPRING SYSTEM.
4. DIMENSIONAL VALUES IN BRACKETS ARE MILLIMETER CONVERSIONS.
25CDH2136
UNIT WIDTH
UNIT HEIGHT
LOWER SASHVERTICAL GLASS
25CDH2148C24
COTTAGE & REVERSE COTTAGEBOOK CODES
C = COTTAGER = REVERSE COTTAGE
ELEVATION SYMBOL LEGEND:
BASIC UNIT CLEAR OPENING EXCEEDS 20” IN WIDTH, 24” INHEIGHT & A MINIMUM OF 5.7 SQ. FT.
NUMBER INDICATES DESIGN PRESSURE (DP) RATING WITHSTANDARD GLAZING.
##
E
SEE SYMBOL LEGEND BELOW
DAYLIGHT OPENING
##
ELEVATION NOTES
Double-Hung Windows
W-2500
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-4
SASH TILTING FOR WASHINGThe Custom Double Hung window will allow the sash to be tilted or removed for easycleaning.
DOUBLE HUNG OPERATION:When the sash are locked at thecheck rails the sash are closed andsealed in the sash opening of theframe.
When the sash are unlocked thelower sash travels vertically to anyposition desired. The upper sash canalso be positioned as desired.
OPERATION & SASH TILTING
Double-Hung Windows
W-2500
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-5
SINGLE UNITS
E1 UNITS WITH AN E1 EGRESS DESIGNATION MEET 5.0 SQ FT EGRESS WITH A DP35 SILL STOP, BUT NOT WITH A DP 50 SILL STOP.E2 UNITS WITH AN E2 EGRESS DESIGNATION MEET 5.0 SQ FT EGRESS WITH EITHER A DP35 OR A DP 50 SILL STOP.E3 UNITS WITH AN E3 EGRESS DESIGNATION MEET 5.7 SQ FT EGRESS WITH A DP35 SILL STOP, BUT NOT WITH A DP 50 SILL STOP.E4 UNITS WITH AN E4 EGRESS DESIGNATION MEET 5.0 SQ FT EGRESS WITH EITHER A DP35 OR A DP 50 SILL STOP.
ELEVATION SYMBOL LEGEND:
##* NUMBER INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING.
VALUES IN () ARE IN MILLIMETER CONVERSIONS.
##** NUMBER INDICATES OPTIONAL DESIGN PRESSURE (DP) RATING.
VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
16 1/16”(408)21 3/8”(543)22 1/8”(562)24 1/8”(613)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
36”(
914)
363/
4”(9
33)
383/
4”(9
84)
25CDH2136 25CDH2536 25CDH2936 25CDH3336 25CDH3736 25CDH4136
25CDH2140 25CDH2540 25CDH2940 25CDH3340 25CDH3740 25CDH4140
25CDH2148 25CDH2548 25CDH2948 25CDH3348 25CDH3748 25CDH4148
25CDH2152 25CDH2552 25CDH2952 25CDH3352 25CDH3752 25CDH4152
25CDH2156 25CDH2556 25CDH2956 25CDH3356 25CDH3756 25CDH4156
25CDH2160 25CDH2560 25CDH2960 25CDH3360 25CDH3760 25CDH4160
20 1/16”(510)25 3/8”(645)26 1/8”(664)28 1/8”(714)
24 1/16”(611)29 3/8”(746)30 1/8”(765)32 1/8”(816)
28 1/16”(716)33 3/8”(848)34 1/8”(867)36 1/8”(918)
32 1/16”(814)37 3/8”(949)38 1/8”(968)
40 1/8”(1019)
36 1/16”(916)41 3/8”(1051)42 1/8”(1070)44 1/8”(1121)
40”(
1016
)40
3/4”
(103
5)42
3/4”
(108
6)
48”(
1219
)48
3/4”
(123
8)50
3/4”
(128
9)
52”(
1321
)52
3/4”
(134
0)54
3/4”
(139
1)
56”(
1441
)56
3/4”
(144
1)58
3/4”
(149
2)
60”(
1543
)60
3/4”
(154
3)62
3/4”
(159
4)
1411
/16”
(373
)[2] 35*
50**
E2 E4 E3
E1 E1 E3
35*50**
35*50**
35*50**
35*50**
35*
35*50**
35*50**
35*50**
35*50**
35*50**
35*
35*50**
35*50**
35*50**
35*50**
35*50**
35*
35*50**
35*50**
35*50**
35*50**
35*50**
35*
35*50**
35*50**
35*50**
35*50**
35*50**
35*
35*50**
35*50**
35*50**
35*50**
35*50**
35*
1611
/16”
(424
)[2]
2011
/16”
(525
)[2]
2211
/16”
(576
)[2]
2411
/16”
(627
)[2]
2611
/16”
(678
)[2]
Double-Hung Windows
W-2500
SCALE: 1/4” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-6
SINGLE UNITS
25CDH2164 25CDH2564 25CDH2964 25CDH3364 25CDH3764 25CDH4164
25CDH2168 25CDH2568 25CDH2968 25CDH3368 25CDH3768
25CDH2172 25CDH2572 25CDH2972 25CDH3372 25CDH3772
25CDH2176 25CDH2576 25CDH2976 25CDH3376 25CDH3776
64”(
1626
)64
3/4”
(164
5)66
3/4”
(169
5)
68”(
1727
)68
3/4”
(174
6)70
3/4”
(179
7)
72”(
1829
)72
3/4”
(184
8)74
3/4”
(189
9)
76”(
1930
)76
3/4”
(194
9)78
3/4”
(200
0)
E2
16 1/16”(408)21 3/8”(543)22 1/8”(562)24 1/8”(613)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
20 1/16”(510)25 3/8”(645)26 1/8”(664)28 1/8”(714)
24 1/16”(611)29 3/8”(746)30 1/8”(765)32 1/8”(816)
28 1/16”(716)33 3/8”(848)34 1/8”(867)36 1/8”(918)
32 1/16”(814)37 3/8”(949)38 1/8”(968)
40 1/8”(1019)
36 1/16”(916)41 3/8”(1051)42 1/8”(1070)44 1/8”(1121)
E4 E4 E4
E4
E2
E2
E4 E4
E4 E4
E4 E4 E3
35*50**
35*50**
35*50**
35*50**
35*50**
35*
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35**50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
3411
/16”
(881
)[2]
3211
/16”
(830
)[2]
3011
/16”
(779
)[2]
2711
/16”
(703
)[2]
E1 UNITS WITH AN E1 EGRESS DESIGNATION MEET 5.0 SQ FT EGRESS WITH A DP35 SILL STOP, BUT NOT WITH A DP 50 SILL STOP.E2 UNITS WITH AN E2 EGRESS DESIGNATION MEET 5.0 SQ FT EGRESS WITH EITHER A DP35 OR A DP 50 SILL STOP.E3 UNITS WITH AN E3 EGRESS DESIGNATION MEET 5.7 SQ FT EGRESS WITH A DP35 SILL STOP, BUT NOT WITH A DP 50 SILL STOP.E4 UNITS WITH AN E4 EGRESS DESIGNATION MEET 5.0 SQ FT EGRESS WITH EITHER A DP35 OR A DP 50 SILL STOP.
ELEVATION SYMBOL LEGEND:
##* NUMBER INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING.
VALUES IN () ARE IN MILLIMETER CONVERSIONS.
##** NUMBER INDICATES OPTIONAL DESIGN PRESSURE (DP) RATING.
VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
Double-Hung Windows
W-2500
SCALE: 1/4” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-7
SINGLE UNITS - NOMINAL
25CDH2036N 25CDH2436N 25CDH2836N 25CDH3236N 25CDH3636N
25CDH2042N 25CDH2442N 25CDH2842N 25CDH3242N 25CDH3642N
25CDH2048N 25CDH2448N 25CDH2848N 25CDH3248N 25CDH3648N
25CDH2054N 25CDH2454N 25CDH2854N 25CDH3254N 25CDH3654N
25CDH2060N 25CDH2460N 25CDH2860N 25CDH3260N 25CDH3660N
13 15/16”(354)19 1/4”(489)
20”(508)22”(559)
351/
4”(8
95)
36”(
914)
38”(
965)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
411/
4”(1
048)
42”(
1067
)44
”(11
18)
471/
4”(1
200)
48”(
1219
)50
”(12
70)
531/
4”(1
353)
54”(
1372
)56
”(14
22)
591/
4”(1
505)
60”(
1524
)62
”(15
75)
145/
16”(
364)
[2]
17 15/16”(455)23 1/4”(591)
24”(610)26”(660)
21 15/16”(557)27 1/4”(692)
28”(711)30”(762)
25 15/16”(659)31 1/4”(794)
32”(813)34”(864)
29 15/16”(760)35 1/4”(895)
36”(914)38”(965)
35*50**
E1 E3
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
175/
16”(
440)
[2]
205/
16”(
515)
[2]
235/
16”(
592)
[2]
265/
16”(
668)
[2]
E1 UNITS WITH AN E1 EGRESS DESIGNATION MEET 5.0 SQ FT EGRESS WITH A DP35 SILL STOP, BUT NOT WITH A DP 50 SILL STOP.E2 UNITS WITH AN E2 EGRESS DESIGNATION MEET 5.0 SQ FT EGRESS WITH EITHER A DP35 OR A DP 50 SILL STOP.E3 UNITS WITH AN E3 EGRESS DESIGNATION MEET 5.7 SQ FT EGRESS WITH A DP35 SILL STOP, BUT NOT WITH A DP 50 SILL STOP.E4 UNITS WITH AN E4 EGRESS DESIGNATION MEET 5.0 SQ FT EGRESS WITH EITHER A DP35 OR A DP 50 SILL STOP.
ELEVATION SYMBOL LEGEND:
##* NUMBER INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING.
VALUES IN () ARE IN MILLIMETER CONVERSIONS.
##** NUMBER INDICATES OPTIONAL DESIGN PRESSURE (DP) RATING.
VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
N INDICATES NOMINALSIZING.
Double-Hung Windows
W-2500
SCALE: 1/4” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-8
SINGLE UNITS - NOMINAL
25CDH2066N 25CDH2466N 25CDH2866N 25CDH3266N 25CDH3666N
25CDH2072N 25CDH2472N 25CDH2872N 25CDH3272N 25CDH3672N
651/
4”(1
657)
66”(
1676
)68
”(17
27)
711/
4”(1
810)
72”(
1829
)74
”(18
80)
13 15/16”(354)19 1/4”(489)
20”(508)22”(559)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
17 15/16”(455)23 1/4”(591)
24”(610)26”(660)
21 15/16”(557)27 1/4”(692)
28”(711)30”(762)
25 15/16”(659)31 1/4”(794)
32”(813)34”(864)
29 15/16”(760)35 1/4”(895)
36”(914)38”(965)
E2 E4 E4
E2 E4
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
295/
16”(
745)
[2]
325/
16”(
821)
[2]
E1 UNITS WITH AN E1 EGRESS DESIGNATION MEET 5.0 SQ FT EGRESS WITH A DP35 SILL STOP, BUT NOT WITH A DP 50 SILL STOP.E2 UNITS WITH AN E2 EGRESS DESIGNATION MEET 5.0 SQ FT EGRESS WITH EITHER A DP35 OR A DP 50 SILL STOP.E3 UNITS WITH AN E3 EGRESS DESIGNATION MEET 5.7 SQ FT EGRESS WITH A DP35 SILL STOP, BUT NOT WITH A DP 50 SILL STOP.E4 UNITS WITH AN E4 EGRESS DESIGNATION MEET 5.0 SQ FT EGRESS WITH EITHER A DP35 OR A DP 50 SILL STOP.
ELEVATION SYMBOL LEGEND:
##* NUMBER INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING.
VALUES IN () ARE IN MILLIMETER CONVERSIONS.
##** NUMBER INDICATES OPTIONAL DESIGN PRESSURE (DP) RATING.
VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
N INDICATES NOMINALSIZING.
Double-Hung Windows
W-2500
SCALE: 1/4” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-9
SINGLE UNITSWITH 15” TRANSOM
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.SEE NOTES ON SINGLE UNIT ELEVATIONS FOR SPECIFIC EGRESS CAPABILITY.
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
20 1/16”(510)25 3/8”(645)26 1/8”(664)28 1/8”(714)
24 1/16”(611) 28 1/16”(716) 32 1/16”(814)29 3/8”(746)30 1/8”(765)32 1/8”(816)
33 3/8”(848)34 1/8”(867)36 1/8”(918)
37 3/8”(949)38 1/8”(968)
40 1/8”(1019)
EEE
EEE
EE
EE
25CDH2536-1T15
25CDH2540-1T15
25CDH2548-1T15
25CDH2552-1T15
25CDH2556-1T15
25CDH2560-1T15
25CDH2564-1T15
25CDH2568-1T15
25CDH2936-1T15
25CDH2940-1T15
25CDH2948-1T15
25CDH2952-1T15
25CDH2956-1T15
25CDH2960-1T15
25CDH2964-1T15
25CDH2968-1T15
25CDH3336-1T15
25CDH3340-1T15
25CDH3348-1T15
25CDH3352-1T15
25CDH3356-1T15
25CDH3360-1T15
25CDH3364-1T15
25CDH3368-1T15
25CDH3736-1T15
25CDH3740-1T15
25CDH3748-1T15
25CDH3752-1T15
25CDH3756-1T15
25CDH3760-1T15
25CDH3764-1T15
25CDH3768-1T15
1411
/16”
(373
)[2]
51”(
1295
)51
3/4”
(131
4)53
3/4”
(136
5)
101/
4”(2
60)
55”(
1397
)55
3/4”
(141
6)57
3/4”
(146
7)
101/
4”(2
60)
63”(
1600
)63
3/4”
(161
9)65
3/4”
(167
0)
101/
4”(2
60)
67”(
1702
)67
3/4”
(172
1)69
3/4”
(177
2)
101/
4”(2
60)
71”(
1803
)71
3/4”
(182
2)73
3/4”
(187
3)
101/
4”(2
60)
75”(
1905
)75
3/4”
(192
4)77
3/4”
(197
5)
101/
4”(2
60)
79”(
2007
)79
3/4”
(202
6)81
3/4”
(207
6)
101/
4”(2
60)
83”(
2108
)83
3/4”
(212
7)85
3/4”
(217
8)
101/
4”(2
60)
1611
/16”
(424
)[2]
2011
/16”
(525
)[2]
2211
/16”
(576
)[2]
2411
/16”
(627
)[2]
2611
/16”
(678
)[2]
2711
/16”
(703
)[2]
3011
/16”
(779
)[2]
Double-Hung Windows
W-2500
SCALE: 1/8” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-10
SINGLE UNITSWITH 15” TRANSOM
E
E
E
E
E
EE
25CDH2572-1T15
25CDH2576-1T15
25CDH2972-1T15 25CDH3372-1T15 25CDH3772-1T15
25CDH2976-1T15 25CDH3376-1T15 25CDH3776-1T15
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
20 1/16”(510)25 3/8”(645)26 1/8”(664)28 1/8”(714)
24 1/16”(611) 28 1/16”(716) 32 1/16”(814)29 3/8”(746)30 1/8”(765)32 1/8”(816)
33 3/8”(848)34 1/8”(867)36 1/8”(918)
37 3/8”(949)38 1/8”(968)
40 1/8”(1019)
87”(
2210
)87
3/4”
(222
9)89
3/4”
(228
0)
101/
4”(2
60)
91”(
2311
)91
3/4”
(233
0)93
3/4”
(238
1)
101/
4”(2
60)
3211
/16”
(830
)[2]
3411
/16”
(881
)[2]
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.SEE NOTES ON SINGLE UNIT ELEVATIONS FOR SPECIFIC EGRESS CAPABILITY.
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
Double-Hung Windows
W-2500
SCALE: 1/8” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-11
SINGLE UNITSWITH 24” TRANSOM
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
E E E
E E
E E
20 1/16”(510)25 3/8”(645)26 1/8”(664)28 1/8”(714)
24 1/16”(611) 28 1/16”(716) 32 1/16”(814)29 3/8”(746)30 1/8”(765)32 1/8”(816)
33 3/8”(848)34 1/8”(867)36 1/8”(918)
37 3/8”(949)38 1/8”(968)
40 1/8”(1019)
25CDH2536-1T24 25CDH2936-1T24 25CDH3336-1T24 25CDH3736-1T24
25CDH2540-1T24 25CDH2940-1T24 25CDH3340-1T24 25CDH3740-1T24
25CDH2548-1T24 25CDH2948-1T24 25CDH3348-1T24 25CDH3748-1T24
25CDH2552-1T24 25CDH2952-1T24 25CDH3352-1T24 25CDH3752-1T24
25CDH2556-1T24 25CDH2956-1T24 25CDH3356-1T24 25CDH3756-1T24
25CDH2560-1T24 25CDH2960-1T24 25CDH3360-1T24 25CDH3760-1T24
25CDH2564-1T24 25CDH2964-1T24 25CDH3364-1T24 25CDH3764-1T24
1411
/16”
(373
)[2]
60”(
1524
)60
3/4”
(154
3)62
3/4”
(159
4)
191/
4”(4
89)
64”(
1626
)64
3/4”
(164
5)66
3/4”
(169
5)
191/
4”(4
89)
72”(
1829
)72
3/4”
(184
8)74
3/4”
(189
9)
191/
4”(4
89)
76”(
1930
)76
3/4”
(194
9)78
3/4”
(200
0)
191/
4”(4
89)
80”(
2032
)80
3/4”
(205
1)82
3/4”
(210
2)
191/
4”(4
89)
84”(
2134
)84
3/4”
(215
3)86
3/4”
(220
3)
191/
4”(4
89)
88”(
2235
)88
3/4”
(225
4)90
3/4”
(230
5)
191/
4”(4
89)
1611
/16”
(424
)[2]
2011
/16”
(525
)[2]
2211
/16”
(576
)[2]
2411
/16”
(627
)[2]
2611
/16”
(678
)[2]
2711
/16”
(703
)[2]
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.SEE NOTES ON SINGLE UNIT ELEVATIONS FOR SPECIFIC EGRESS CAPABILITY.
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
Double-Hung Windows
W-2500
SCALE: 1/8” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-12
SINGLE UNITSWITH 24” TRANSOM
E E E E
E E E
E E E
25CDH2568-1T24 25CDH2968-1T24 25CDH3368-1T24 25CDH3768-1T24
25CDH2572-1T24 25CDH2972-1T24 25CDH3372-1T24 25CDH3772-1T24
25CDH2576-1T24 25CDH2976-1T24 25CDH3376-1T24 25CDH3776-1T24
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
20 1/16”(510)25 3/8”(645)26 1/8”(664)28 1/8”(714)
24 1/16”(611) 28 1/16”(716) 32 1/16”(814)29 3/8”(746)30 1/8”(765)32 1/8”(816)
33 3/8”(848)34 1/8”(867)36 1/8”(918)
37 3/8”(949)38 1/8”(968)
40 1/8”(1019)
92”(
2337
)92
3/4”
(235
6)94
3/4”
(240
7)
191/
4”(4
89)
96”(
2438
)96
3/4”
(245
7)98
3/4”
(250
8)
191/
4”(4
89)
100”
(254
0)10
03/
4”(2
559)
102
3/4”
(261
0)
191/
4”(4
89)
3011
/16”
(779
)[2]
3211
/16”
(830
)[2]
3411
/16”
(881
)[2]
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.SEE NOTES ON SINGLE UNIT ELEVATIONS FOR SPECIFIC EGRESS CAPABILITY.
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
Double-Hung Windows
W-2500
SCALE: 1/8” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-13
SINGLE UNITS - NOMINALWITH 18” TRANSOM
25CDH2036N-1T18
25CDH2042N-1T18
25CDH2048N-1T18
25CDH2054N-1T18
25CDH2060N-1T18
25CDH2066N-1T18
25CDH2072N-1T18
25CDH2436N-1T18
25CDH2442N-1T18
25CDH2448N-1T18
25CDH2454N-1T18
25CDH2460N-1T18
25CDH2466N-1T18
25CDH2472N-1T18
25CDH2836N-1T18
25CDH2842N-1T18
25CDH2848N-1T18
25CDH2854N-1T18
25CDH2860N-1T18
25CDH2866N-1T18
25CDH2872N-1T18
25CDH3636N-1T18
25CDH3642N-1T18
25CDH3648N-1T18
25CDH3654N-1T18
25CDH3660N-1T18
25CDH3666N-1T18
25CDH3672N-1T18
E
E
E
E
E
E
E
13 15/16”(354)19 1/4”(489)
20”(508)22”(559)
17 15/16”(455) 21 15/16”(557) 29 15/16”(760)DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
23 1/4”(591)24”(610)26”(660)
27 1/4”(692)28”(711)30”(762)
35 1/4”(895)36”(914)38”(965)
145/
16”(
364)
[2]
531/
4”(1
353)
54”(
1372
)56
”(14
22)
131/
4”(3
37)
591/
4”(1
505)
60”(
1524
)62
”(15
75)
131/
4”(3
37)
651/
4”(1
657)
66”(
1676
)68
”(17
27)
131/
4”(3
37)
711/
4”(1
810)
72”(
1829
)74
”(18
80)
131/
4”(3
37)
771/
4”(1
962)
78”(
1981
)80
”(20
32)
131/
4”(3
37)
831/
4”(2
115)
84”(
2134
)86
”(21
84)
131/
4”(3
37)
891/
4”(2
267)
90”(
2286
)92
”(23
37)
131/
4”(3
37)
175/
16”(
440)
[2]
205/
16”(
515)
[2]
235/
16”(
592)
[2]
265/
16”(
668)
[2]
295/
16”(
745)
[2]
325/
16”(
821)
[2]
N INDICATES NOMINALSIZING.
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.SEE NOTES ON SINGLE UNIT ELEVATIONS FOR SPECIFIC EGRESS CAPABILITY.
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
Double-Hung Windows
W-2500
SCALE: 1/8” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-14
TWIN UNITS
1411
/16”
(373
)[2]
36”(
914)
363/
4”(9
33)
383/
4”(9
84)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
40”(
1016
)40
3/4”
(103
5)42
3/4”
(108
6)
48”(
1219
)48
3/4”
(123
8)50
3/4”
(128
9)
52”(
1321
)52
3/4”
(134
0)54
3/4”
(139
1)
56”(
1441
)56
3/4”
(144
1)58
3/4”
(149
2)
1543
”(xx
xx)
603/
4”(1
543)
623/
4”(1
594)
64”(
1626
)64
3/4”
(164
5)66
3/4”
(169
5)
68”(
1727
)68
3/4”
(174
6)70
3/4”
(179
7)
72”(
1829
)72
3/4”
(184
8)74
3/4”
(189
9)
76”(
1930
)76
3/4”
(194
9)78
3/4”
(200
0)
16 1/16”(408)[2]42 3/4”(1086)43 1/2”(1105)45 1/2”(1156)
20 1/16”(510)[2]50 3/4”(1289)51 1/2”(1308)53 1/2”(1359)
24 1/16”(611)[2]58 3/4”(1492)59 1/2”(1511)61 1/2”(1562)
28 1/16”(713)[2]66 3/4”(1696)67 1/2”(1715)69 1/2”(1765)
32 1/16”(814)[2]74 3/4”(1899)75 1/2”(1918)77 1/2”(1969)
36 1/16”(916)[2]82 3/4”(2102)83 1/2”(2121)85 1/2”(2172)
25CDH2136-2
25CDH2140-2
25CDH2148-2
25CDH2152-2
25CDH2156-2
25CDH2160-2
25CDH2164-2
25CDH2168-2
25CDH2172-2
25CDH2176-2
25CDH2536-2
25CDH2540-2
25CDH2548-2
25CDH2552-2
25CDH2556-2
25CDH2560-2
25CDH2564-2
25CDH2568-2
25CDH2572-2
25CDH2576-2
25CDH2936-2
25CDH2940-2
25CDH2948-2
25CDH2952-2
25CDH2956-2
25CDH2960-2
25CDH2964-2
25CDH2968-2
25CDH2972-2
25CDH2976-2
25CDH3336-2
25CDH3340-2
25CDH3348-2
25CDH3352-2
25CDH3356-2
25CDH3360-2
25CDH3364-2
25CDH3368-2
25CDH3372-2
25CDH3376-2
25CDH3736-2
25CDH3740-2
25CDH3748-2
25CDH3752-2
25CDH3756-2
25CDH3760-2
25CDH3764-2
25CDH3768-2
25CDH3772-2
25CDH3776-2
25CDH4136-2
25CDH4140-2
25CDH4148-2
25CDH4152-2
25CDH4156-2
25CDH4160-2
25CDH4164-2
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
1611
/16”
(424
)[2]
2011
/16”
(525
)[2]
2211
/16”
(576
)[2]
2411
/16”
(627
)[2]
2611
/16”
(678
)[2]
2711
/16”
(703
)[2]
3011
/16”
(779
)[2]
3211
/16”
(830
)[2]
3411
/16”
(881
)[2]
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.SEE NOTES ON SINGLE UNIT ELEVATIONS FOR SPECIFIC EGRESS CAPABILITY.
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
Double-Hung Windows
W-2500
SCALE: 1/8” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-15
TWIN UNITS - NOMINAL
25CDH2036N-2 25CDH2436N-2 25CDH2836N-2 25CDH3236N-2 25CDH3636N-2
25CDH2042N-2 25CDH2442N-2 25CDH2842N-2 25CDH3242N-2 25CDH3642N-2
25CDH2048N-2 25CDH2448N-2 25CDH2848N-2 25CDH3248N-2 25CDH3648N-2
25CDH2054N-2 25CDH2454N-2 25CDH2854N-2 25CDH3254N-2 25CDH3654N-2
25CDH2060N-2 25CDH2460N-2 25CDH2860N-2 25CDH3260N-2 25CDH3660N-2
25CDH2066N-2 25CDH2466N-2 25CDH2866N-2 25CDH3266N-2 25CDH3666N-2
25CDH2072N-2 25CDH2472N-2 25CDH2872N-2 25CDH3272N-2 25CDH3672N-2
13 15/16”(354)[2]39 1/4”(997)40”(1016)42”(1067)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
17 15/16”(455)[2]47 1/4”(1200)
48”(1219)50”(1270)
21 15/16”(557)[2]55 1/4”(1403)
56”(1422)58”(1473)
25 15/16”(659)[2]63 1/4”(1607)
64”(1626)66”(1676)
29 15/16”(760)[2]71 1/4”(1810)
72”(1829)74”(1880)
145/
16”(
364)
[2]
351/
4”(8
95)
36”(
914)
38”(
965)
411/
4”(1
048)
42”(
1067
)44
”(11
18)
471/
4”(1
200)
48”(
1219
)50
”(12
70)
531/
4”(1
353)
54”(
1372
)56
”(14
22)
591/
4”(1
505)
60”(
1524
)62
”(15
75)
651/
4”(1
657)
66”(
1676
)68
”(17
27)
711/
4”(1
810)
72”(
1829
)74
”(18
80)
EEE
EE
EE
175/
16”(
440)
[2]
205/
16”(
515)
[2]
235/
16”(
592)
[2]
265/
16”(
668)
[2]
295/
16”(
745)
[2]
325/
16”(
821)
[2]
N INDICATES NOMINALSIZING.
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.SEE NOTES ON SINGLE UNIT ELEVATIONS FOR SPECIFIC EGRESS CAPABILITY.
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
Double-Hung Windows
W-2500
SCALE: 1/8” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-16
TWIN UNITSWITH 15” TRANSOM
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
E
20 1/16”(510)[2]50 3/4”(1289)51 1/2”(1308)53 1/2”(1259)
24 1/16”(611)[2]58 3/4”(1492)59 1/2”(1511)61 1/2”(1562)
28 1/16”(716)[2]66 3/4”(1695)67 1/2”(1715)69 1/2”(1765)
32 1/16”(814)[2]74 3/4”(1899)75 1/2”(1918)77 1/2”(1969)
1411
/16”
(373
)[2]
51”(
1295
)51
3/4”
(131
4)53
3/4”
(136
5)
101/
4”(2
60)
55”(
1397
)55
3/4”
(141
6)57
3/4”
(146
7)
101/
4”(2
60)
63”(
1600
)63
3/4”
(161
9)65
3/4”
(167
0)
101/
4”(2
60)
67”(
1702
)67
3/4”
(172
1)69
3/4”
(177
2)
101/
4”(2
60)
71”(
1803
)71
3/4”
(182
2)73
3/4”
(187
3)
101/
4”(2
60)
75”(
1905
)75
3/4”
(192
4)77
3/4”
(197
5)
101/
4”(2
60)
79”(
2007
)79
3/4”
(202
6)81
3/4”
(207
6)
101/
4”(2
60)
83”(
2108
)83
3/4”
(212
7)85
3/4”
(217
8)
101/
4”(2
60)
25CDH2536-2A15 25CDH2936-2A15 25CDH3336-2A15 25CDH3736-2A15
25CDH2540-2A15 25CDH2940-2A15 25CDH3340-2A15 25CDH3740-2A15
25CDH2548-2A15 25CDH2948-2A15 25CDH3348-2A15 25CDH3748-2A15
25CDH2552-2A15 25CDH2952-2A15 25CDH3352-2A15 25CDH3752-2A15
25CDH2556-2A15 25CDH2956-2A15 25CDH3356-2A15 25CDH3756-2A15
25CDH2560-2A15 25CDH2960-2A15 25CDH3360-2A15 25CDH3760-2A15
25CDH2564-2A15 25CDH2964-2A15 25CDH3364-2A15 25CDH3764-2A15
25CDH2568-2A15 25CDH2968-2A15 25CDH3368-2A15 25CDH3768-2A15
E
E E
E E
E EE
E
1611
/16”
(424
)[2]
2011
/16”
(525
)[2]
2211
/16”
(576
)[2]
2411
/16”
(627
)[2]
2611
/16”
(678
)[2]
2711
/16”
(703
)[2]
3011
/16”
(779
)[2]
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.SEE NOTES ON SINGLE UNIT ELEVATIONS FOR SPECIFIC EGRESS CAPABILITY.
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
Double-Hung Windows
W-2500
SCALE: 1/8” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-17
TWIN UNITSWITH 15” TRANSOM
87”(
2210
)87
3/4”
(222
9)89
3/4”
(228
0)
101/
4”(2
60)
91”(
2311
)91
3/4”
(233
0)93
3/4”
(238
1)
101/
4”(2
60)
25CDH2572-2A15 25CDH2972-2A15 25CDH3372-2A15 25CDH3772-2A15
25CDH2576-2A15 25CDH2976-2A15 25CDH3376-2A15 25CDH3776-2A15
E E
E EEE
E
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
20 1/16”(510)[2]50 3/4”(1289)51 1/2”(1308)53 1/2”(1259)
24 1/16”(611)[2]58 3/4”(1492)59 1/2”(1511)61 1/2”(1562)
28 1/16”(716)[2]66 3/4”(1695)67 1/2”(1715)69 1/2”(1765)
32 1/16”(814)[2]74 3/4”(1899)75 1/2”(1918)77 1/2”(1969)
3211
/16”
(830
)[2]
3411
/16”
(881
)[2]
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.SEE NOTES ON SINGLE UNIT ELEVATIONS FOR SPECIFIC EGRESS CAPABILITY.
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
Double-Hung Windows
W-2500
SCALE: 1/8” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-18
TWIN UNITSWITH 24” TRANSOM
E
25CDH2536-2A24 25CDH2936-2A24 25CDH3336-2A24 25CDH3736-2A24
25CDH2540-2A24 25CDH2940-2A24 25CDH3340-2A24 25CDH3740-2A24
25CDH2548-2A24 25CDH2948-2A24 25CDH3348-2A24 25CDH3748-2A24
25CDH2552-2A24 25CDH2952-2A24 25CDH3352-2A24 25CDH3752-2A24
25CDH2556-2A24 25CDH2956-2A24 25CDH3356-2A24 25CDH3756-2A24
25CDH2560-2A24 25CDH2960-2A24 25CDH3360-2A24 25CDH3760-2A24
25CDH2564-2A24 25CDH2964-2A24 25CDH3364-2A24 25CDH3764-2A24
E
E E
E EE
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
20 1/16”(510)[2]50 3/4”(1289)51 1/2”(1308)53 1/2”(1259)
24 1/16”(611)[2]58 3/4”(1492)59 1/2”(1511)61 1/2”(1562)
28 1/16”(716)[2]66 3/4”(1695)67 1/2”(1715)69 1/2”(1765)
32 1/16”(814)[2]74 3/4”(1899)75 1/2”(1918)77 1/2”(1969)
1411
/16”
(373
)[2]
60”(
1524
)60
3/4”
(154
3)62
3/4”
(159
4)
191/
4”(4
89)
64”(
1626
)64
3/4”
(164
5)66
3/4”
(169
5)
191/
4”(4
89)
72”(
1829
)72
3/4”
(184
8)74
3/4”
(189
9)
191/
4”(4
89)
76”(
1930
)76
3/4”
(194
9)78
3/4”
(200
0)
191/
4”(4
89)
80”(
2032
)80
3/4”
(205
1)82
3/4”
(210
2)
191/
4”(4
89)
84”(
2134
)84
3/4”
(215
3)86
3/4”
(220
3)
191/
4”(4
89)
88”(
2235
)88
3/4”
(225
4)90
3/4”
(230
5)
191/
4”(4
89)
1611
/16”
(424
)[2]
2011
/16”
(525
)[2]
2211
/16”
(576
)[2]
2411
/16”
(627
)[2]
2611
/16”
(678
)[2]
2711
/16”
(703
)[2]
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.SEE NOTES ON SINGLE UNIT ELEVATIONS FOR SPECIFIC EGRESS CAPABILITY.
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
Double-Hung Windows
W-2500
SCALE: 1/8” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-19
TWIN UNITSWITH 24” TRANSOM
25CDH2568-2A24 25CDH2968-2A24 25CDH3368-2A24 25CDH3768-2A24
25CDH2572-2A24 25CDH2972-2A24 25CDH3372-2A24 25CDH3772-2A24
25CDH2576-2A24 25CDH2976-2A24 25CDH3376-2A24 25CDH3776-2A24
E E
E E
E EEE
E
E
92”(
2337
)92
3/4”
(235
6)94
3/4”
(240
7)
191/
4”(4
89)
96”(
2438
)96
3/4”
(245
7)98
3/4”
(250
8)
191/
4”(4
89)
100”
(254
0)10
03/
4”(2
559)
102
3/4”
(261
0)
191/
4”(4
89)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
20 1/16”(510)[2]50 3/4”(1289)51 1/2”(1308)53 1/2”(1259)
24 1/16”(611)[2]58 3/4”(1492)59 1/2”(1511)61 1/2”(1562)
28 1/16”(716)[2]66 3/4”(1695)67 1/2”(1715)69 1/2”(1765)
32 1/16”(814)[2]74 3/4”(1899)75 1/2”(1918)77 1/2”(1969)
3011
/16”
(779
)[2]
3211
/16”
(830
)[2]
3411
/16”
(881
)[2]
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.SEE NOTES ON SINGLE UNIT ELEVATIONS FOR SPECIFIC EGRESS CAPABILITY.
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
Double-Hung Windows
W-2500
SCALE: 1/8” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-20
TWIN UNITS - NOMINALWITH 18” TRANSOM
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
25CDH2036N-2A18 25CDH2436N-2A18 25CDH2836N-2A18 25CDH3636N-2A18
25CDH2042N-2A18 25CDH2442N-2A18 25CDH2842N-2A18 25CDH3642N-2A18
25CDH2048N-2A18 25CDH2448N-2A18 25CDH2848N-2A18 25CDH3648N-2A18
25CDH2054N-2A18 25CDH2454N-2A18 25CDH2854N-2A18 25CDH3654N-2A18
25CDH2060N-2A18 25CDH2460N-2A18 25CDH2860N-2A18 25CDH3660N-2A18
25CDH2066N-2A18 25CDH2466N-2A18 25CDH2866N-2A18 25CDH3666N-2A18
25CDH2072N-2A18 25CDH2472N-2A18 25CDH2872N-2A18 25CDH3672N-2A18
145/
16”(
364)
[2]
531/
4”(1
353)
54”(
1372
)56
”(14
22)
131/
4”(3
37)
591/
4”(1
505)
60”(
1524
)62
”(15
75)
131/
4”(3
37)
651/
4”(1
657)
66”(
1676
)68
”(17
27)
131/
4”(3
37)
711/
4”(1
810)
72”(
1829
)74
”(18
80)
131/
4”(3
37)
771/
4”(1
962)
78”(
1981
)80
”(20
32)
131/
4”(3
37)
831/
4”(2
115)
84”(
2134
)86
”(21
84)
131/
4”(3
37)
891/
4”(2
267)
90”(
2286
)92
”(23
37)
131/
4”(3
37)
13 15/16”(354)[2]39 1/4”(997)40”(1016)42”(1067)
EEE
EE
EE
17 15/16”(455)[2]47 1/4”(1200)
48”(1219)50”(1270)
21 15/16”(557)[2]55 1/4”(1403)
56”(1422)58”(1473)
29 15/16”(760)[2]71 1/4”(1810)
72”(1829)74”(1880)
175/
16”(
440)
[2]
205/
16”(
515)
[2]
235/
16”(
592)
[2]
265/
16”(
668)
[2]
295/
16”(
745)
[2]
325/
16”(
821)
[2]
N INDICATES NOMINALSIZING.
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.SEE NOTES ON SINGLE UNIT ELEVATIONS FOR SPECIFIC EGRESS CAPABILITY.
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
Double-Hung Windows
W-2500
SCALE: 1/8” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-21
TRIPLE UNITS
E
16 1/16”(408)[3]64 1/8”(1629)64 7/8”(1648)66 7/8”(1699)
25CDH2136-3 25CDH2536-3 25CDH2936-3 25CDH3336-3 25CDH3736-3
25CDH2140-3 25CDH2540-3 25CDH2940-3 25CDH3340-3 25CDH3740-3
25CDH2148-3 25CDH2548-3 25CDH2948-3 25CDH3348-3 25CDH3748-3
25CDH2152-3 25CDH2552-3 25CDH2952-3 25CDH3352-3 25CDH3752-3
25CDH2156-3 25CDH2556-3 25CDH2956-3 25CDH3356-3 25CDH3756-3
25CDH2160-3 25CDH2560-3 25CDH2960-3 25CDH3360-3 25CDH3760-3
25CDH2164-3 25CDH2564-3 25CDH2964-3 25CDH3364-3 25CDH3764-3
25CDH2168-3 25CDH2568-3 25CDH2968-3 25CDH3368-3 25CDH3768-3
25CDH2172-3 25CDH2572-3 25CDH2972-3 25CDH3372-3 25CDH3772-3
25CDH2176-3 25CDH2576-3 25CDH2976-3 25CDH3376-3 25CDH3776-3
20 1/16”(510)[3]76 1/8”(1934)76 7/8”(1953)78 7/8”(2003)
24 1/16”(611)[3]88 1/8”(2238)88 7/8”(2257)90 7/8”(2308)
28 1/16”(713)[3]100 1/8”(2543)100 7/8”(2562)102 7/8”(2613)
32 1/16”(814)[3]112 1/8”(2848)112 7/8”(2867)114 7/8”(2918)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
EE E
EEE
EEE
EEE
EE
EE
1411
/16”
(373
)[2]
36”(
914)
363/
4”(9
33)
383/
4”(9
84)
40”(
1016
)40
3/4”
(103
5)42
3/4”
(108
6)
48”(
1219
)48
3/4”
(123
8)50
3/4”
(128
9)
52”(
1321
)52
3/4”
(134
0)54
3/4”
(139
1)
56”(
1441
)56
3/4”
(144
1)58
3/4”
(149
2)
1543
”(xx
xx)
603/
4”(1
543)
623/
4”(1
594)
64”(
1626
)64
3/4”
(164
5)66
3/4”
(169
5)
68”(
1727
)68
3/4”
(174
6)70
3/4”
(179
7)
72”(
1829
)72
3/4”
(184
8)74
3/4”
(189
9)
76”(
1930
)76
3/4”
(194
9)78
3/4”
(200
0)
1611
/16”
(424
)[2]
2011
/16”
(525
)[2]
2211
/16”
(576
)[2]
2411
/16”
(627
)[2]
2611
/16”
(678
)[2]
2711
/16”
(703
)[2]
3011
/16”
(779
)[2]
3211
/16”
(830
)[2]
3411
/16”
(881
)[2]
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.SEE NOTES ON SINGLE UNIT ELEVATIONS FOR SPECIFIC EGRESS CAPABILITY.
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
Double-Hung Windows
W-2500
SCALE: 1/8” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-22
TRIPLE UNITS
25CDH4136-3
25CDH4140-3
25CDH4148-3
25CDH4152-3
25CDH4156-3
25CDH4160-3
25CDH4164-3
36 1/16”(916)[3]124 1/8”(3153)124 7/8”(3172)126 7/8”(3223)
E
E
E
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
1411
/16”
(373
)[2]
36”(
914)
363/
4”(9
33)
383/
4”(9
84)
40”(
1016
)40
3/4”
(103
5)42
3/4”
(108
6)
48”(
1219
)48
3/4”
(123
8)50
3/4”
(128
9)
52”(
1321
)52
3/4”
(134
0)54
3/4”
(139
1)
56”(
1441
)56
3/4”
(144
1)58
3/4”
(149
2)
1543
”(xx
xx)
603/
4”(1
543)
623/
4”(1
594)
64”(
1626
)64
3/4”
(164
5)66
3/4”
(169
5)
1611
/16”
(424
)[2]
2011
/16”
(525
)[2]
2211
/16”
(576
)[2]
2411
/16”
(627
)[2]
2611
/16”
(678
)[2]
2711
/16”
(703
)[2]
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.SEE NOTES ON SINGLE UNIT ELEVATIONS FOR SPECIFIC EGRESS CAPABILITY.
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
Double-Hung Windows
W-2500
SCALE: 1/8” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-23
TRIPLE UNITS - NOMINAL
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
E
E
E
E
E
E
E
25CDH2036N-3
25CDH2042N-3
25CDH2048N-3
25CDH2054N-3
25CDH2060N-3
25CDH2066N-3
25CDH2072N-3
25CDH2436N-3
25CDH2442N-3
25CDH2448N-3
25CDH2454N-3
25CDH2460N-3
25CDH2466N-3
25CDH2472N-3
25CDH2836N-3
25CDH2842N-3
25CDH2848N-3
25CDH2854N-3
25CDH2860N-3
25CDH2866N-3
25CDH2872N-3
25CDH3236N-3
25CDH3242N-3
25CDH3248N-3
25CDH3254N-3
25CDH3260N-3
25CDH3266N-3
25CDH3272N-3
25CDH3636N-3
25CDH3642N-3
25CDH3648N-3
25CDH3654N-3
25CDH3660N-3
25CDH3666N-3
25CDH3672N-3
13 15/16”(354)[3]59 1/4”(1505)
60”(1524)62”(1575)
17 15/16”(455)[3]71 1/4”(1810)
72”(1829)74”(1880)
21 15/16”(557)[3]83 1/4”(2115)
84”(2134)86”(2184)
25 15/16”(659)[3]95 1/4”(2419)
96”(2438)98”(2489)
29 15/16”(760)[3]107 1/4”(2724)
108”(2743)110”(2794)
145/
16”(
364)
[2]
351/
4”(8
95)
36”(
914)
38”(
965)
411/
4”(1
048)
42”(
1067
)44
”(11
18)
471/
4”(1
200)
48”(
1219
)50
”(12
70)
531/
4”(1
353)
54”(
1372
)56
”(14
22)
591/
4”(1
505)
60”(
1524
)62
”(15
75)
651/
4”(1
657)
66”(
1676
)68
”(17
27)
711/
4”(1
810)
72”(
1829
)74
”(18
80)
175/
16”(
440)
[2]
205/
16”(
515)
[2]
235/
16”(
592)
[2]
265/
16”(
668)
[2]
295/
16”(
745)
[2]
325/
16”(
821)
[2]
N INDICATES NOMINALSIZING.
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.SEE NOTES ON SINGLE UNIT ELEVATIONS FOR SPECIFIC EGRESS CAPABILITY.
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
Double-Hung Windows
W-2500
SCALE: 1/8” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-24
TRIPLE UNITSWITH 15” TRANSOM
E
E
E
E
E
E
E
E
E
E
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
25CDH2536-3A15 25CDH2936-3A15 25CDH3336-3A15 25CDH3736-3A15
25CDH2540-3A15 25CDH2940-3A15 25CDH3340-3A15 25CDH3740-3A15
25CDH2548-3A15 25CDH2948-3A15 25CDH3348-3A15 25CDH3748-3A15
25CDH2552-3A15 25CDH2952-3A15 25CDH3352-3A15 25CDH3752-3A15
25CDH2556-3A15 25CDH2956-3A15 25CDH3356-3A15 25CDH3756-3A15
25CDH2560-3A15 25CDH2960-3A15 25CDH3360-3A15 25CDH3760-3A15
25CDH2564-3A15 25CDH2964-3A15 25CDH3364-3A15 25CDH3764-3A15
25CDH2568-3A15 25CDH2968-3A15 25CDH3368-3A15 25CDH3768-3A15
20 1/16”(510)[3]76 1/8”(1934)76 7/8”(1953)78 7/8”(2003)
24 1/16”(611)[3] 28 1/16”(716)[3] 32 1/16”(814)[3]88 1/8”(2238)88 7/8”(2257)90 7/8”(2308)
100 1/8”(2543)100 7/8”(2562)102 7/8”(2613)
112 1/8”(2848)112 7/8”(2867)114 7/8”(2918)
1411
/16”
(373
)[2]
51”(
1295
)51
3/4”
(131
4)53
3/4”
(136
5)
101/
4”(2
60)
55”(
1397
)55
3/4”
(141
6)57
3/4”
(146
7)
101/
4”(2
60)
63”(
1600
)63
3/4”
(161
9)65
3/4”
(167
0)
101/
4”(2
60)
67”(
1702
)67
3/4”
(172
1)69
3/4”
(177
2)
101/
4”(2
60)
71”(
1803
)71
3/4”
(182
2)73
3/4”
(187
3)
101/
4”(2
60)
75”(
1905
)75
3/4”
(192
4)77
3/4”
(197
5)
101/
4”(2
60)
79”(
2007
)79
3/4”
(202
6)81
3/4”
(207
6)
101/
4”(2
60)
83”(
2108
)83
3/4”
(212
7)85
3/4”
(217
8)
101/
4”(2
60)
1611
/16”
(424
)[2]
2011
/16”
(525
)[2]
2211
/16”
(576
)[2]
2411
/16”
(627
)[2]
2611
/16”
(678
)[2]
2711
/16”
(703
)[2]
3011
/16”
(779
)[2]
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.SEE NOTES ON SINGLE UNIT ELEVATIONS FOR SPECIFIC EGRESS CAPABILITY.
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
Double-Hung Windows
W-2500
SCALE: 1/8” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-25
TRIPLE UNITSWITH 15” TRANSOM
E
E
E
E
E
EE
25CDH2572-3A15 25CDH2972-3A15 25CDH3372-3A15 25CDH3772-3A15
25CDH2576-3A15 25CDH2976-3A15 25CDH3376-3A15 25CDH3776-3A15
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
20 1/16”(510)[3]76 1/8”(1934)76 7/8”(1953)78 7/8”(2003)
24 1/16”(611)[3] 28 1/16”(716)[3] 32 1/16”(814)[3]88 1/8”(2238)88 7/8”(2257)90 7/8”(2308)
100 1/8”(2543)100 7/8”(2562)102 7/8”(2613)
112 1/8”(2848)112 7/8”(2867)114 7/8”(2918)
87”(
2210
)87
3/4”
(222
9)89
3/4”
(228
0)
101/
4”(2
60)
91”(
2311
)91
3/4”
(233
0)93
3/4”
(238
1)
101/
4”(2
60)
3211
/16”
(830
)[2]
3411
/16”
(881
)[2]
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.SEE NOTES ON SINGLE UNIT ELEVATIONS FOR SPECIFIC EGRESS CAPABILITY.
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
Double-Hung Windows
W-2500
SCALE: 1/8” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-26
TRIPLE UNITSWITH 24” TRANSOM
E
E
E
E
E
EE
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
25CDH2536-3A24 25CDH2936-3A24 25CDH3336-3A24 25CDH3736-3A24
25CDH2540-3A24 25CDH2940-3A24 25CDH3340-3A24 25CDH3740-3A24
25CDH2548-3A24 25CDH2948-3A24 25CDH3348-3A24 25CDH3748-3A24
25CDH2552-3A24 25CDH2952-3A24 25CDH3352-3A24 25CDH3752-3A24
25CDH2556-3A24 25CDH2956-3A24 25CDH3356-3A24 25CDH3756-3A24
25CDH2560-3A24 25CDH2960-3A24 25CDH3360-3A24 25CDH3760-3A24
25CDH2564-3A24 25CDH2964-3A24 25CDH3364-3A24 25CDH3764-3A24
20 1/16”(510)[3]76 1/8”(1934)76 7/8”(1953)78 7/8”(2003)
24 1/16”(611)[3] 28 1/16”(716)[3] 32 1/16”(814)[3]88 1/8”(2238)88 7/8”(2257)90 7/8”(2308)
100 1/8”(2543)100 7/8”(2562)102 7/8”(2613)
112 1/8”(2848)112 7/8”(2867)114 7/8”(2918)
1411
/16”
(373
)[2]
60”(
1524
)60
3/4”
(154
3)62
3/4”
(159
4)
191/
4”(4
89)
64”(
1626
)64
3/4”
(164
5)66
3/4”
(169
5)
191/
4”(4
89)
72”(
1829
)72
3/4”
(184
8)74
3/4”
(189
9)
191/
4”(4
89)
76”(
1930
)76
3/4”
(194
9)78
3/4”
(200
0)
191/
4”(4
89)
80”(
2032
)80
3/4”
(205
1)82
3/4”
(210
2)
191/
4”(4
89)
84”(
2134
)84
3/4”
(215
3)86
3/4”
(220
3)
191/
4”(4
89)
88”(
2235
)88
3/4”
(225
4)90
3/4”
(230
5)
191/
4”(4
89)
1611
/16”
(424
)[2]
2011
/16”
(525
)[2]
2211
/16”
(576
)[2]
2411
/16”
(627
)[2]
2611
/16”
(678
)[2]
2711
/16”
(703
)[2]
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.SEE NOTES ON SINGLE UNIT ELEVATIONS FOR SPECIFIC EGRESS CAPABILITY.
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
Double-Hung Windows
W-2500
SCALE: 1/8” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-27
TRIPLE UNITSWITH 24” TRANSOM
E
E
E
E
E
E
E
E
EE
25CDH2568-3A24 25CDH2968-3A24 25CDH3368-3A24 25CDH3768-3A24
25CDH2572-3A24 25CDH2972-3A24 25CDH3372-3A24 25CDH3772-3A24
25CDH2576-3A24 25CDH2976-3A24 25CDH3376-3A24 25CDH3776-3A24
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
20 1/16”(510)[3]76 1/8”(1934)76 7/8”(1953)78 7/8”(2003)
24 1/16”(611)[3] 28 1/16”(716)[3] 32 1/16”(814)[3]88 1/8”(2238)88 7/8”(2257)90 7/8”(2308)
100 1/8”(2543)100 7/8”(2562)102 7/8”(2613)
112 1/8”(2848)112 7/8”(2867)114 7/8”(2918)
92”(
2337
)92
3/4”
(235
6)94
3/4”
(240
7)
191/
4”(4
89)
96”(
2438
)96
3/4”
(245
7)98
3/4”
(250
8)
191/
4”(4
89)
100”
(254
0)10
03/
4”(2
559)
102
3/4”
(261
0)
191/
4”(4
89)
3011
/16”
(779
)[2]
3211
/16”
(830
)[2]
3411
/16”
(881
)[2]
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.SEE NOTES ON SINGLE UNIT ELEVATIONS FOR SPECIFIC EGRESS CAPABILITY.
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
Double-Hung Windows
W-2500
SCALE: 1/8” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-28
TRIPLE UNITS - NOMINALWITH 18” TRANSOM
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
25CDH2036N-3A18
25CDH2042N-3A18
25CDH2048N-3A18
25CDH2054N-3A18
25CDH2060N-3A18
25CDH2066N-3A18
25CDH2072N-3A18
25CDH2436N-3A18 25CDH2836N-3A18 25CDH3636N-3A18
25CDH2442N-3A18 25CDH2842N-3A18 25CDH3642N-3A18
25CDH2448N-3A18 25CDH2848N-3A18 25CDH3648N-3A18
25CDH2454N-3A18 25CDH2854N-3A18 25CDH3654N-3A18
25CDH2460N-3A18 25CDH2860N-3A18 25CDH3660N-3A18
25CDH2466N-3A18 25CDH2866N-3A18 25CDH3666N-3A18
25CDH2472N-3A18 25CDH2872N-3A18 25CDH3672N-3A18
13 15/16”(354)[3]59 1/4”(1505)
60”(1524)62”(1575)
17 15/16”(455)[3] 21 15/16”(557)[3] 29 15/16”(760)[3]
E
E
E
E
E
E
E
71 1/4”(1810)72”(1829)74”(1880)
83 1/4”(2115)84”(2134)86”(2184)
107 1/4”(2724)108”(2743)110”(2794)
145/
16”(
364)
[2]
531/
4”(1
353)
54”(
1372
)56
”(14
22)
131/
4”(3
37)
591/
4”(1
505)
60”(
1524
)62
”(15
75)
131/
4”(3
37)
651/
4”(1
657)
66”(
1676
)68
”(17
27)
131/
4”(3
37)
711/
4”(1
810)
72”(
1829
)74
”(18
80)
131/
4”(3
37)
771/
4”(1
962)
78”(
1981
)80
”(20
32)
131/
4”(3
37)
831/
4”(2
115)
84”(
2134
)86
”(21
84)
131/
4”(3
37)
891/
4”(2
267)
90”(
2286
)92
”(23
37)
131/
4”(3
37)
175/
16”(
440)
[2]
205/
16”(
515)
[2]
235/
16”(
592)
[2]
265/
16”(
668)
[2]
295/
16”(
745)
[2]
325/
16”(
821)
[2]
N INDICATES NOMINALSIZING.
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.SEE NOTES ON SINGLE UNIT ELEVATIONS FOR SPECIFIC EGRESS CAPABILITY.
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
Double-Hung Windows
W-2500
SCALE: 1/8” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-29
4 WIDE UNITS
16 1/16”(408)[4]85 1/2”(2172)86 1/4”(2191)88 1/4”(2242)
25CDH2136-4 25CDH2536-4 25CDH2936-4 25CDH3336-4
25CDH2140-4 25CDH2540-4 25CDH2940-4 25CDH3340-4
25CDH2148-4 25CDH2548-4 25CDH2948-4 25CDH3348-4
25CDH2152-4 25CDH2552-4 25CDH2952-4 25CDH3352-4
25CDH2156-4 25CDH2556-4 25CDH2956-4 25CDH3356-4
25CDH2160-4 25CDH2560-4 25CDH2960-4 25CDH3360-4
25CDH2164-4 25CDH2564-4 25CDH2964-4 25CDH3364-4
25CDH2168-4 25CDH2568-4 25CDH2968-4 25CDH3368-4
25CDH2172-4 25CDH2572-4 25CDH2972-4 25CDH3372-4
25CDH2176-4 25CDH2576-4 25CDH2976-4 25CDH3376-4
20 1/16”(510)[4]101 1/2”(2578)102 1/4”(2597)104 1/4”(2648)
24 1/16”(611)[4]117 1/2”(2985)118 1/4”(3004)120 1/4”(3054)
28 1/16”(713)[4]133 1/2”(3391)134 1/4”(3410)136 1/4”(3461)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
EEE
EE
EE
EE
E
E
1411
/16”
(373
)[2]
36”(
914)
363/
4”(9
33)
383/
4”(9
84)
40”(
1016
)40
3/4”
(103
5)42
3/4”
(108
6)
48”(
1219
)48
3/4”
(123
8)50
3/4”
(128
9)
52”(
1321
)52
3/4”
(134
0)54
3/4”
(139
1)
56”(
1441
)56
3/4”
(144
1)58
3/4”
(149
2)
1543
”(xx
xx)
603/
4”(1
543)
623/
4”(1
594)
64”(
1626
)64
3/4”
(164
5)66
3/4”
(169
5)
68”(
1727
)68
3/4”
(174
6)70
3/4”
(179
7)
72”(
1829
)72
3/4”
(184
8)74
3/4”
(189
9)
76”(
1930
)76
3/4”
(194
9)78
3/4”
(200
0)
1611
/16”
(424
)[2]
2011
/16”
(525
)[2]
2211
/16”
(576
)[2]
2411
/16”
(627
)[2]
2611
/16”
(678
)[2]
2711
/16”
(703
)[2]
3011
/16”
(779
)[2]
3211
/16”
(830
)[2]
3411
/16”
(881
)[2]
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.SEE NOTES ON SINGLE UNIT ELEVATIONS FOR SPECIFIC EGRESS CAPABILITY.
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
Double-Hung Windows
W-2500
SCALE: 1/8” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-30
4 WIDE UNITS
25CDH3736-4
25CDH3740-4
25CDH3748-4
25CDH3752-4
25CDH3756-4
25CDH3760-4
25CDH3764-4
25CDH3768-4
25CDH3772-4
25CDH3776-4
32 1/16”(814)[4]149 1/2”(3797)150 1/4”(3816)152 1/4”(3867)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
E
E
E
E
E
E
1411
/16”
(373
)[2]
36”(
914)
363/
4”(9
33)
383/
4”(9
84)
40”(
1016
)40
3/4”
(103
5)42
3/4”
(108
6)
48”(
1219
)48
3/4”
(123
8)50
3/4”
(128
9)
52”(
1321
)52
3/4”
(134
0)54
3/4”
(139
1)
56”(
1441
)56
3/4”
(144
1)58
3/4”
(149
2)
1543
”(xx
xx)
603/
4”(1
543)
623/
4”(1
594)
64”(
1626
)64
3/4”
(164
5)66
3/4”
(169
5)
68”(
1727
)68
3/4”
(174
6)70
3/4”
(179
7)
72”(
1829
)72
3/4”
(184
8)74
3/4”
(189
9)
76”(
1930
)76
3/4”
(194
9)78
3/4”
(200
0)
1611
/16”
(424
)[2]
2011
/16”
(525
)[2]
2211
/16”
(576
)[2]
2411
/16”
(627
)[2]
2611
/16”
(678
)[2]
2711
/16”
(703
)[2]
3011
/16”
(779
)[2]
3211
/16”
(830
)[2]
3411
/16”
(881
)[2]
E UNIT MEETS EGRESS REQUIREMENTS FOR IRC CODE. STATE AND LOCAL EGRESS CODES MAY DIFFER. ALWAYS REFER TO LOCAL BUILDING CODES FOR COMPLETE REQUIREMENTS.CHECK WITH LOCAL OFFICIALS TO ENSURE COMPLIANCE BEFORE INSTALLING THE UNIT.SEE NOTES ON SINGLE UNIT ELEVATIONS FOR SPECIFIC EGRESS CAPABILITY.
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
Double-Hung Windows
W-2500
SCALE: 1/8” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-31
5 WIDE UNITS
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
16 1/16”(408)[5]106 7/8”(2715)107 5/8”(2734)109 5/8”(2785)
25CDH2136-5
25CDH2140-5
25CDH2148-5
25CDH2152-5
25CDH2156-5
25CDH2160-5
25CDH2164-5
25CDH2168-5
25CDH2172-5
25CDH2176-5
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
25CDH2536-5
25CDH2540-5
25CDH2548-5
25CDH2552-5
25CDH2556-5
25CDH2560-5
25CDH2564-5
25CDH2568-5
25CDH2572-5
25CDH2576-5
25CDH2936-5
25CDH2940-5
25CDH2948-5
25CDH2952-5
25CDH2956-5
25CDH2960-5
25CDH2964-5
25CDH2968-5
25CDH2972-5
25CDH2976-5
25CDH3336-5
25CDH3340-5
25CDH3348-5
25CDH3352-5
25CDH3356-5
25CDH3360-5
25CDH3364-5
25CDH3368-5
25CDH3372-5
25CDH3376-5
20 1/16”(510)[5]126 7/8”(3223)127 5/8”(3242)129 5/8”(3293)
24 1/16”(611)[5]146 7/8”(3731)147 5/8”(3750)149 5/8”(3801)
28 1/16”(713)[5]166 7/8”(4239)167 5/8”(4258)169 5/8”(4309)
1411
/16”
(373
)[2]
36”(
914)
363/
4”(9
33)
383/
4”(9
84)
40”(
1016
)40
3/4”
(103
5)42
3/4”
(108
6)
48”(
1219
)48
3/4”
(123
8)50
3/4”
(128
9)
52”(
1321
)52
3/4”
(134
0)54
3/4”
(139
1)
56”(
1441
)56
3/4”
(144
1)58
3/4”
(149
2)
1543
”(xx
xx)
603/
4”(1
543)
623/
4”(1
594)
64”(
1626
)64
3/4”
(164
5)66
3/4”
(169
5)
68”(
1727
)68
3/4”
(174
6)70
3/4”
(179
7)
72”(
1829
)72
3/4”
(184
8)74
3/4”
(189
9)
76”(
1930
)76
3/4”
(194
9)78
3/4”
(200
0)
1611
/16”
(424
)[2]
2011
/16”
(525
)[2]
2211
/16”
(576
)[2]
2411
/16”
(627
)[2]
2611
/16”
(678
)[2]
2711
/16”
(703
)[2]
3011
/16”
(779
)[2]
3211
/16”
(830
)[2]
3411
/16”
(881
)[2]
Double-Hung Windows
W-2500
SCALE: 1/8” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-32
5 WIDE UNITS
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
25CDH3736-5
25CDH3740-5
25CDH3748-5
25CDH3752-5
25CDH3756-5
25CDH3760-5
25CDH3764-5
25CDH3768-5
25CDH3772-5
25CDH3776-5
32 1/16”(814)[5]186 7/8”(4747)187 5/8”(4766)189 5/8”(4817)
25CDH3736-5
25CDH3740-5
25CDH3748-5
25CDH3752-5
25CDH3756-5
25CDH3760-5
25CDH3764-5
25CDH3768-5
25CDH3772-5
25CDH3776-5
32 1/16”(814)[5]186 7/8”(4747)187 5/8”(4766)189 5/8”(4817)
1411
/16”
(373
)[2]
36”(
914)
363/
4”(9
33)
383/
4”(9
84)
40”(
1016
)40
3/4”
(103
5)42
3/4”
(108
6)
48”(
1219
)48
3/4”
(123
8)50
3/4”
(128
9)
52”(
1321
)52
3/4”
(134
0)54
3/4”
(139
1)
56”(
1441
)56
3/4”
(144
1)58
3/4”
(149
2)
1543
”(xx
xx)
603/
4”(1
543)
623/
4”(1
594)
64”(
1626
)64
3/4”
(164
5)66
3/4”
(169
5)
68”(
1727
)68
3/4”
(174
6)70
3/4”
(179
7)
72”(
1829
)72
3/4”
(184
8)74
3/4”
(189
9)
76”(
1930
)76
3/4”
(194
9)78
3/4”
(200
0)
1611
/16”
(424
)[2]
2011
/16”
(525
)[2]
2211
/16”
(576
)[2]
2411
/16”
(627
)[2]
2611
/16”
(678
)[2]
2711
/16”
(703
)[2]
3011
/16”
(779
)[2]
3211
/16”
(830
)[2]
3411
/16”
(881
)[2]
Double-Hung Windows
W-2500
SCALE: 1/8” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-33
ELEVATION DRAWINGS UTILIZE A LIMITED NUMBER OF PROJECTED LINES TO PRODUCE A RUDIMENTARY DRAWING INTENDEDTO BE USED IN A SMALL GRAPHICAL SCALE. ELEVATIONS ARE VIEWED PERPENDICULAR FROM THE EXTERIOR OF THESTRUCTURE. IF MORE DIMENSIONS ARE NEEDED, USE THE SECTION DRAWINGS FOR MORE COMPLETE DEPICTIONS.
1. ALL UNITS SHOWN ARE AVAILABLE AS STATIONARY ONLY.
2. UNIT ELEVATIONS ARE SHOWN WITHOUT EXTERIOR TRIM.
3. DIMENSIONAL VALUES IN BRACKETS ARE MILLIMETER CONVERSIONS.
GENERAL DOUBLE HUNG TRANSOM NOTES
25CDHP2124
ROUGH OPENINGDIMENSIONS ARE
IN BOLD TEXT.
M.O. Adams/Flat CasingRough Opening
M.O. Brickmould
Frame Size
Masonry Openings for Brickmould, Flat & Adams Casing.Vertical measurements include sillnose.(Subtract 1/2” from Masonry Opening for Unit Size)
OUTSIDE OFFRAME.
’25CDHP’ INDICATESW2500 CLAD DOUBLE HUNG TRANSOM
BOOK CODE
THE LAST TWO NUMBERS INDICATETHE UNITS HEIGHTTHE FIRST TWO NUMBERS
INDICATE THE UNIT WIDTH
SEE SYMBOL LEGEND BELOW
ELEVATION SYMBOL LEGEND:
NUMBER INDICATES DESIGN PRESSURE (DP) RATING WITHSTANDARD GLAZING.
##
DAYLIGHT OPENING
24 7/8” ( 632 )27 7/8” ( 708 )21 3/8” ( 543 )17 3/4” (451)
27 1/16” ( 687 )28 9/16” ( 725 )24 3/4” ( 629 )24” ( 610 )20 3/8” ( 518 )
##
ELEVATION NOTESPICTURE UNITS
Double-Hung Windows
W-2500
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-34
PICTURE UNITS
Note: Elevations shown DO NOT have exterior trim. For other Trim Options refer to the Unit Sizing, Rough Opening and Masonry Opening page.
25CDHP1212
6 3/4”(171)12”(305)
12 3/4”(324)14 3/4”(375)
12 3/4”(324)18”(457)
18 3/4”(476)20 3/4”(527)
18 3/4”(476)24”(610)
24 3/4”(629)26 3/4”(679)
24 3/4”(629)30”(762)
30 3/4”(781)32 3/4”(832)
30 3/4”(781)36”(914)
36 3/4”(933)38 3/4”(984)
34 3/4”(883)40”(1016)
40 3/4”(1035)42 3/4”(1086)
36 3/4”(933)42”(1067)
42 3/4”(1086)44 3/4”(1137)
12”(
305)
123/
4”(3
24)
143/
4”(3
75)
71/
4”(1
84)
18”(
457)
183/
4”(4
76)
203/
4”(5
27)
131/
4”(3
37)
24”(
610)
243/
4”(6
29)
263/
4”(6
79)
191/
4”(4
89)
30”(
762)
303/
4”(7
81)
323/
4”(8
32)
251/
4”(6
41)
36”(
914)
363/
4”(9
33)
383/
4”(9
84)
311/
4”(7
94)
40”(
1016
)40
3/4”
(103
5)42
3/4”
(108
6)
351/
4”(8
95)
42”(
1067
)42
3/4”
(108
6)44
3/4”
(113
7)
371/
4”(9
46)
48”(
1219
)48
3/4”
(123
8)50
3/4”
(128
9)
431/
4”(1
099)
25CDHP1812 25CDHP2412 25CDHP3012 25CDHP3612 25CDHP4012 25CDHP4212
25CDHP1218 25CDHP1818 25CDHP2418 25CDHP3018 25CDHP3618 25CDHP4018 25CDHP4218
25CDHP1224 25CDHP1824 25CDHP2424 25CDHP3024 25CDHP3624 25CDHP4024 25CDHP4224
25CDHP1230 25CDHP1830 25CDHP2430 25CDHP3030 25CDHP3630 25CDHP4030 25CDHP4230
25CDHP1236 25CDHP1836 25CDHP2436 25CDHP3036 25CDHP3636 25CDHP4036 25CDHP4236
25CDHP1240 25CDHP1840 25CDHP2440 25CDHP3040 25CDHP3640 25CDHP4040 25CDHP4240
25CDHP1242 25CDHP1842 25CDHP2442 25CDHP3042 25CDHP3642 25CDHP4042 25CDHP4242
25CDHP1248 25CDHP1848 25CDHP2448 25CDHP3048 25CDHP3648 25CDHP4048 25CDHP4248
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
ELEVATION SYMBOL LEGEND:
##* NUMBER INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING.VALUES IN () ARE IN MILLIMETER CONVERSIONS.
##** NUMBER INDICATES OPTIONAL DESIGN PRESSURE (DP) RATING.
Double-Hung Windows
W-2500
SCALE: 1/4” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-35
PICTURE UNITS
54”(
1372
)54
3/4”
(139
1)56
3/4”
(144
1)
491/
4”(1
251)
56”(
1422
)56
3/4”
(144
1)58
3/4”
(149
2)
511/
4”(1
302)
60”(
1524
)62
3/4”
(159
4)64
3/4”
(164
5)
551/
4”(1
403)
64”(
1626
)64
3/4”
(164
5)66
3/4”
(169
5)
591/
4”(1
505)
68”(
1727
)68
3/4”
(174
6)70
3/4”
(179
7)
631/
4”(1
607)
25CDHP1254 25CDHP1854 25CDHP2454 25CDHP3054 25CDHP3654 25CDHP4054 25CDHP4254
25CDHP1256 25CDHP1856 25CDHP2456 25CDHP3056 25CDHP3656 25CDHP4056 25CDHP4256
25CDHP1260 25CDHP1860 25CDHP2460 25CDHP3060 25CDHP3660 25CDHP4060 25CDHP4260
25CDHP1264 25CDHP1864 25CDHP2464 25CDHP3064 25CDHP3664 25CDHP4064 25CDHP4264
25CDHP1268 25CDHP1868 25CDHP2468 25CDHP3068 25CDHP3668 25CDHP4068 25CDHP4268
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
6 3/4”(171)12”(305)
12 3/4”(324)14 3/4”(375)
12 3/4”(324)18”(457)
18 3/4”(476)20 3/4”(527)
18 3/4”(476)24”(610)
24 3/4”(629)26 3/4”(679)
24 3/4”(629)30”(762)
30 3/4”(781)32 3/4”(832)
30 3/4”(781)36”(914)
36 3/4”(933)38 3/4”(984)
34 3/4”(883)40”(1016)
40 3/4”(1035)42 3/4”(1086)
36 3/4”(933)42”(1067)
42 3/4”(1086)44 3/4”(1137)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
ELEVATION SYMBOL LEGEND:
##* NUMBER INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING.VALUES IN () ARE IN MILLIMETER CONVERSIONS.
##** NUMBER INDICATES OPTIONAL DESIGN PRESSURE (DP) RATING.
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
Double-Hung Windows
W-2500
SCALE: 1/4” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-36
PICTURE UNITS
72”(
1829
)72
3/4”
(184
8)74
3/4”
(189
9)
671/
4”(1
708)
76”(
1930
)76
3/4”
(194
9)78
3/4”
(200
0)
711/
4”(1
810)
88”(
2235
)88
3/4”
(225
4)90
3/4”
(230
5)
831/
4”(2
115)
25CDHP1272 25CDHP1872 25CDHP2472 25CDHP3072 25CDHP3672 25CDHP4072 25CDHP4272
25CDHP1276 25CDHP1876 25CDHP2476 25CDHP3076 25CDHP3676 25CDHP4076 25CDHP4276
25CDHP1288 25CDHP1888 25CDHP2488 25CDHP3088 25CDHP3688 25CDHP4088 25CDHP4288
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50*
35*50**
35*50**
35*50**
35*50**
6 3/4”(171)12”(305)
12 3/4”(324)14 3/4”(375)
12 3/4”(324)18”(457)
18 3/4”(476)20 3/4”(527)
18 3/4”(476)24”(610)
24 3/4”(629)26 3/4”(679)
24 3/4”(629)30”(762)
30 3/4”(781)32 3/4”(832)
30 3/4”(781)36”(914)
36 3/4”(933)38 3/4”(984)
34 3/4”(883)40”(1016)
40 3/4”(1035)42 3/4”(1086)
36 3/4”(933)42”(1067)
42 3/4”(1086)44 3/4”(1137)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
ELEVATION SYMBOL LEGEND:
##* NUMBER INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING.VALUES IN () ARE IN MILLIMETER CONVERSIONS.
##** NUMBER INDICATES OPTIONAL DESIGN PRESSURE (DP) RATING.
Double-Hung Windows
W-2500
SCALE: 1/4” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-37
PICTURE UNITS
44”(1118)49 3/8”(1254)50 1/8”(1273)52 1/8”(1324)
42 3/4”(1086)48”(1219)
48 3/4”(1238)50 3/4”(1289)
48 3/4”(1238)54”(1372)
54 3/4”(1391)56 3/4”(1441)
54 3/4”(1391)60”(1524)
60 3/4”(1543)62 3/4”(1594)
25CDHP4812 25CDHP4912 25CDHP5412 25CDHP6012
25CDHP4818 25CDHP4918 25CDHP5418 25CDHP6018
25CDHP4824 25CDHP4924 25CDHP5424 25CDHP6024
25CDHP4830 25CDHP4930 25CDHP5430 25CDHP6030
25CDHP4836 25CDHP4936 25CDHP5436 25CDHP6036
25CDHP4840 25CDHP4940 25CDHP5440 25CDHP6040
25CDHP4842 25CDHP4942 25CDHP5442 25CDHP6042
25CDHP4848 25CDHP4948 25CDHP5448 25CDHP6048
35*50**
35*50**
35**50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
12”(
305)
123/
4”(3
24)
143/
4”(3
75)
71/
4”(1
84)
18”(
457)
183/
4”(4
76)
203/
4”(5
27)
131/
4”(3
37)
24”(
610)
243/
4”(6
29)
263/
4”(6
79)
191/
4”(4
89)
30”(
762)
303/
4”(7
81)
323/
4”(8
32)
251/
4”(6
41)
36”(
914)
363/
4”(9
33)
383/
4”(9
84)
311/
4”(7
94)
40”(
1016
)40
3/4”
(103
5)42
3/4”
(108
6)
351/
4”(8
95)
42”(
1067
)42
3/4”
(108
6)44
3/4”
(113
7)
371/
4”(9
46)
48”(
1219
)48
3/4”
(123
8)50
3/4”
(128
9)
431/
4”(1
099)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
ELEVATION SYMBOL LEGEND:
##* NUMBER INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING.VALUES IN () ARE IN MILLIMETER CONVERSIONS.
##** NUMBER INDICATES OPTIONAL DESIGN PRESSURE (DP) RATING.
Double-Hung Windows
W-2500
SCALE: 1/4” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-38
PICTURE UNITS
25CDHP4854 25CDHP4954 25CDHP5454 25CDHP6054
25CDHP4856 25CDHP4956 25CDHP5456 25CDHP6056
25CDHP4860 25CDHP4960 25CDHP5460 25CDHP6060
25CDHP4864 25CDHP4964 25CDHP5464 25CDHP6064
25CDHP4868 25CDHP4968 25CDHP5468 25CDHP6068
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
54”(
1372
)54
3/4”
(139
1)56
3/4”
(144
1)
491/
4”(1
251)
56”(
1422
)56
3/4”
(144
1)58
3/4”
(149
2)
511/
4”(1
302)
60”(
1524
)62
3/4”
(159
4)64
3/4”
(164
5)
551/
4”(1
403)
64”(
1626
)64
3/4”
(164
5)66
3/4”
(169
5)
591/
4”(1
505)
68”(
1727
)68
3/4”
(174
6)70
3/4”
(179
7)
631/
4”(1
607)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
44”(1118)49 3/8”(1254)50 1/8”(1273)52 1/8”(1324)
42 3/4”(1086)48”(1219)
48 3/4”(1238)50 3/4”(1289)
48 3/4”(1238)54”(1372)
54 3/4”(1391)56 3/4”(1441)
54 3/4”(1391)60”(1524)
60 3/4”(1543)62 3/4”(1594)
ELEVATION SYMBOL LEGEND:
##* NUMBER INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING.VALUES IN () ARE IN MILLIMETER CONVERSIONS.
##** NUMBER INDICATES OPTIONAL DESIGN PRESSURE (DP) RATING.
Double-Hung Windows
W-2500
SCALE: 1/4” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-39
PICTURE UNITS
25CDHP4872 25CDHP4972 25CDHP5472 25CDHP6072
25CDHP4876 25CDHP4976 25CDHP5476 25CDHP6076
25CDHP4888 25CDHP4988 25CDHP5488 25CDHP6088
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
72”(
1829
)72
3/4”
(184
8)74
3/4”
(189
9)
671/
4”(1
708)
76”(
1930
)76
3/4”
(194
9)78
3/4”
(200
0)
711/
4”(1
810)
88”(
2235
)88
3/4”
(225
4)90
3/4”
(230
5)
831/
4”(2
115)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
44”(1118)49 3/8”(1254)50 1/8”(1273)52 1/8”(1324)
42 3/4”(1086)48”(1219)
48 3/4”(1238)50 3/4”(1289)
48 3/4”(1238)54”(1372)
54 3/4”(1391)56 3/4”(1441)
54 3/4”(1391)60”(1524)
60 3/4”(1543)62 3/4”(1594)
ELEVATION SYMBOL LEGEND:
##* NUMBER INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING.VALUES IN () ARE IN MILLIMETER CONVERSIONS.
##** NUMBER INDICATES OPTIONAL DESIGN PRESSURE (DP) RATING.
Double-Hung Windows
W-2500
SCALE: 1/4” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-40
PICTURE UNITS
56”(1422)61 3/8”(1559)62 1/8”(1578)64 1/8”(1629)
60 3/4”(1543)66”(1676)
66 3/4”(1695)68 3/4”(1746)
66 3/4”(1695)72”(1829)
72 3/4”(1848)74 3/4”(1899)
25CDHP6112 25CDHP6612 25CDHP7212
25CDHP6118 25CDHP6618 25CDHP7218
25CDHP6124 25CDHP6624 25CDHP7224
25CDHP6130 25CDHP6630 25CDHP7230
25CDHP6136 25CDHP6636 25CDHP7236
25CDHP6140 25CDHP6640 25CDHP7240
25CDHP6142 25CDHP6642 25CDHP7242
25CDHP6148 25CDHP6648 25CDHP7248
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
12”(
305)
123/
4”(3
24)
143/
4”(3
75)
71/
4”(1
84)
18”(
457)
183/
4”(4
76)
203/
4”(5
27)
131/
4”(3
37)
24”(
610)
243/
4”(6
29)
263/
4”(6
79)
191/
4”(4
89)
30”(
762)
303/
4”(7
81)
323/
4”(8
32)
251/
4”(6
41)
36”(
914)
363/
4”(9
33)
383/
4”(9
84)
311/
4”(7
94)
40”(
1016
)40
3/4”
(103
5)42
3/4”
(108
6)
351/
4”(8
95)
42”(
1067
)42
3/4”
(108
6)44
3/4”
(113
7)
371/
4”(9
46)
48”(
1219
)48
3/4”
(123
8)50
3/4”
(128
9)
431/
4”(1
099)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
ELEVATION SYMBOL LEGEND:
##* NUMBER INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING.VALUES IN () ARE IN MILLIMETER CONVERSIONS.
##** NUMBER INDICATES OPTIONAL DESIGN PRESSURE (DP) RATING.
Double-Hung Windows
W-2500
SCALE: 1/4” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-41
PICTURE UNITS
25CDHP6154 25CDHP6654 25CDHP7254
25CDHP6156 25CDHP6656 25CDHP7256
25CDHP6160 25CDHP6660 25CDHP7260
25CDHP6164 25CDHP6664 25CDHP7264
25CDHP6168 25CDHP6668 25CDHP7268
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
54”(
1372
)54
3/4”
(139
1)56
3/4”
(144
1)
491/
4”(1
251)
56”(
1422
)56
3/4”
(144
1)58
3/4”
(149
2)
511/
4”(1
302)
60”(
1524
)62
3/4”
(159
4)64
3/4”
(164
5)
551/
4”(1
403)
64”(
1626
)64
3/4”
(164
5)66
3/4”
(169
5)
591/
4”(1
505)
68”(
1727
)68
3/4”
(174
6)70
3/4”
(179
7)
631/
4”(1
607)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
56”(1422)61 3/8”(1559)62 1/8”(1578)64 1/8”(1629)
60 3/4”(1543)66”(1676)
66 3/4”(1695)68 3/4”(1746)
66 3/4”(1695)72”(1829)
72 3/4”(1848)74 3/4”(1899)
ELEVATION SYMBOL LEGEND:
##* NUMBER INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING.VALUES IN () ARE IN MILLIMETER CONVERSIONS.
##** NUMBER INDICATES OPTIONAL DESIGN PRESSURE (DP) RATING.
Double-Hung Windows
W-2500
SCALE: 1/4” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-42
PICTURE UNITS
25CDHP6172 25CDHP6672 25CDHP7272
25CDHP6176 25CDHP6676 25CDHP7276
25CDHP6188 25CDHP6688 25CDHP7288
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
72”(
1829
)72
3/4”
(184
8)74
3/4”
(189
9)
671/
4”(1
708)
76”(
1930
)76
3/4”
(194
9)78
3/4”
(200
0)
711/
4”(1
810)
88”(
2235
)88
3/4”
(225
4)90
3/4”
(230
5)
831/
4”(2
115)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
56”(1422)61 3/8”(1559)62 1/8”(1578)64 1/8”(1629)
60 3/4”(1543)66”(1676)
66 3/4”(1695)68 3/4”(1746)
66 3/4”(1695)72”(1829)
72 3/4”(1848)74 3/4”(1899)
ELEVATION SYMBOL LEGEND:
##* NUMBER INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING.VALUES IN () ARE IN MILLIMETER CONVERSIONS.
##** NUMBER INDICATES OPTIONAL DESIGN PRESSURE (DP) RATING.
Double-Hung Windows
W-2500
SCALE: 1/4” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-43
ELEVATION DRAWINGS UTILIZE A LIMITED NUMBER OF PROJECTED LINES TO PRODUCE A RUDIMENTARY DRAWING INTENDEDTO BE USED IN A SMALL GRAPHICAL SCALE. ELEVATIONS ARE VIEWED PERPENDICULAR FROM THE EXTERIOR OF THESTRUCTURE. IF MORE DIMENSIONS ARE NEEDED, USE THE SECTION DRAWINGS FOR MORE COMPLETE DEPICTIONS.
1. ALL UNITS SHOWN ARE AVAILABLE AS STATIONARY ONLY.
2. UNIT ELEVATIONS ARE SHOWN WITHOUT EXTERIOR TRIM.
3. DIMENSIONAL VALUES IN BRACKETS ARE MILLIMETER CONVERSIONS.
4. UNIT SHOWN IS FOR A W-2500 DH TRANSOM WITH STANDARD SASH, THETRADITION SASH OPTION WILL HAVE A DIFFERENT DAYLIGHT OPENINGVALUE.
GENERAL DOUBLE HUNG TRANSOM NOTES
25CDHT2124
ROUGH OPENINGDIMENSIONS ARE
IN BOLD TEXT.
M.O. Adams/Flat CasingRough Opening
M.O. Brickmould
Frame Size
Masonry Openings for Brickmould, Flat & Adams Casing.Vertical measurements include sillnose.(Subtract 1/2” from Masonry Opening for Unit Size)
OUTSIDE OFFRAME.
’25CDHT’ INDICATESW2500 CLAD DOUBLE HUNG TRANSOM
BOOK CODE
THE LAST TWO NUMBERS INDICATETHE UNITS HEIGHTTHE FIRST TWO NUMBERS
INDICATE THE UNIT WIDTH
SEE SYMBOL LEGEND BELOW
ELEVATION SYMBOL LEGEND:
NUMBER INDICATES DESIGN PRESSURE (DP) RATING WITHSTANDARD GLAZING.
##
DAYLIGHT OPENING
24 7/8” [ 632 ]27 7/8” [ 708 ]21 3/8” [ 543 ]15 1/16”(383)
27 1/16” [ 687 ]28 9/16” [ 725 ]24 3/4” [ 629 ]24” [ 610 ]19 1/8” [ 486 ]
##
ELEVATION NOTESTRANSOM UNITS
Double-Hung Windows
W-2500
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-44
TRANSOM UNITS - 1 WIDE
ELEVATION SYMBOL LEGEND:
##* NUMBER INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING.VALUES IN () ARE IN MILLIMETER CONVERSIONS.
##** NUMBER INDICATES OPTIONAL DESIGN PRESSURE (DP) RATING.
16”(406)21 3/8”(543)22 1/8”(562)24 1/8”(613)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
15”(
381)
153/
4”(4
00)
173/
4”(4
51)
103/
16”(
259)
20”(508)25 3/8”(645)26 1/8”(664)28 1/8”(714)
24”(610)29 3/8”(746)30 1/8”(765)32 1/8”(816)
28”(711)33 3/8”(848)34 1/8”(867)36 1/8”(918)
32”(813)37 3/8”(949)38 1/8”(968)
40 1/8”(1019)
36”(914)41 3/8”(1051)42 1/8”(1070)44 1/8”(1121)
24”(
610)
243/
4”(6
29)
263/
4”(6
80)
193/
16”(
487)
25CDHT2115 25CDHT2515 25CDHT2915 25CDHT3315 25CDHT3715 25CDHT4115
25CDHT412425CDHT372425CDHT332425CDHT292425CDHT252425CDHT2124
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
35*50**
Double-Hung Windows
W-2500
SCALE: 1/4” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-45
TRANSOM UNITS - 1 WIDE - NOMINAL
N INDICATES NOMINALSIZING.
25CDHT2018N
13 15/16”(354)19 1/4”(489)
20”(508)22”(559)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
171/
4”(4
38)
18”(
457)
20”(
508)
127/
16”(
259)
17 15/16”(456)23 1/4”(591)
24”(610)26”(660)
21 15/16”(557)27 1/4”(692)
28”(711)30”(762)
25 15/16”(659)31 1/4”(794)
32”(813)34”(864)
29 15/16”(760)35 1/4”(895)
36”(914)38”(965)
25CDHT2418N 25CDHT2818N 25CDHT3218N 25CDHT3618N
35*50**
35*50**
35*50**
35*50**
35*50**
ELEVATION SYMBOL LEGEND:
##* NUMBER INDICATES DESIGN PRESSURE (DP) RATING WITH STANDARD GLAZING.VALUES IN () ARE IN MILLIMETER CONVERSIONS.
##** NUMBER INDICATES OPTIONAL DESIGN PRESSURE (DP) RATING.
Double-Hung Windows
W-2500
SCALE: 1/4” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-46
TRANSOM UNITS - 2 WIDE
20 1/16”(510)[2]50 3/4”(1365)51 1/2”(1308)53 1/2”(1359)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
24 1/16”(611)[2]58 3/4”(1492)59 1/2”(1511)61 1/2”(1562)
28 1/16”(713)[2]66 3/4”(1696)67 1/2”(1715)69 1/2”(1765)
32 1/16”(814)[2]74 3/4”(1899)75 1/2”(1918)77 1/2”(1969)
25CDHT2515-2 25CDHT2915-2 25CDHT3315-2
25CDHT3715-2
25CDHT3724-2
25CDHT3324-225CDHT2924-225CDHT2524-2
15”(
381)
153/
4”(4
00)
173/
4”(4
51)
103/
16”(
259)
24”(
610)
243/
4”(6
29)
263/
4”(6
80)
193/
16”(
487)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
15”(
381)
153/
4”(4
00)
173/
4”(4
51)
103/
16”(
259)
24”(
610)
243/
4”(6
29)
263/
4”(6
80)
193/
16”(
487)
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
Double-Hung Windows
W-2500
SCALE: 1/4” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-47
TRANSOM UNITS - 3 WIDE
20 1/16”(510)[3]76 1/8”(1934)76 7/8”(1953)78 7/8”(2003)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
15”(
381)
153/
4”(4
00)
173/
4”(4
51)
103/
16”(
259)
24 1/16”(611)[3]88 1/8”(2238)88 7/8”(2257)90 7/8”(2308)
28 1/16”(713)[3]100 1/8”(2543)100 7/8”(2562)102 7/8”(2613)
32 1/16”(814)[3]112 1/8”(2848)112 7/8”(2867)114 7/8”(2918)
24”(
610)
243/
4”(6
29)
263/
4”(6
80)
193/
16”(
487)
25CDHT2515-3
25CDHT2524-3
25CDHT2915-3
25CDHT2924-3
25CDHT3315-3
25CDHT3324-3
25CDHT3715-3
25CDHT3724-3
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
15”(
381)
153/
4”(4
00)
173/
4”(4
51)
103/
16”(
259)
24”(
610)
243/
4”(6
29)
263/
4”(6
80)
193/
16”(
487)
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
Double-Hung Windows
W-2500
SCALE: 1/4” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-48
TRANSOM UNITS - 4 WIDE
20 1/16”(510)[4]101 1/2”(2578)102 1/4”(2597)104 1/4”(2648)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
15”(
381)
153/
4”(4
00)
173/
4”(4
51)
103/
16”(
259)
25CDHT2515-4
24 1/16”(611)[4]117 1/2”(2985)118 1/4”(3004)120 1/4”(3054)
28 1/16”(713)[4]133 1/2”(3391)134 1/4”(3410)136 1/4”(3461)
32 1/16”(814)[4]149 1/2”(3797)150 1/4”(3816)152 1/4”(3867)
24”(
610)
243/
4”(6
29)
263/
4”(6
80)
193/
16”(
487)
25CDHT2524-4
25CDHT2915-4
25CDHT2924-4
25CDHT3315-4
25CDHT3324-4
25CDHT3715-4
25CDHT3724-4
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
15”(
381)
153/
4”(4
00)
173/
4”(4
51)
103/
16”(
259)
24”(
610)
243/
4”(6
29)
263/
4”(6
80)
193/
16”(
487)
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
Double-Hung Windows
W-2500
SCALE: 1/4” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-49
TRANSOM UNITS - 5 WIDE
20 1/16”(510)[5]126 7/8”(3223)127 3/8”(3235)129 3/8”(3286)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
15”(
381)
153/
4”(4
00)
173/
4”(4
51)
103/
16”(
259)
25CDHT2515-5
24 1/16”(611)[5]146 7/8”(3731)147 3/8”(3743)149 3/8”(3794)
28 1/16”(713)[5]166 7/8”(4239)167 3/8”(4251)169 3/8”(4302)
32 1/16”(814)[5]186 7/8”(4747)187 3/8”(4759)189 3/8”(4810)
24”(
610)
243/
4”(6
29)
263/
4”(6
80)
193/
16”(
487)
25CDHT2524-5
25CDHT2915-5
25CDHT2924-5
25CDHT3315-5
25CDHT3324-5
25CDHT3715-5
25CDHT3724-5
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
15”(
381)
153/
4”(4
00)
173/
4”(4
51)
103/
16”(
259)
24”(
610)
243/
4”(6
29)
263/
4”(6
80)
193/
16”(
487)
DAYLIGHT OPENINGFRAME SIZE
ROUGH OPENINGUNIT SIZE
15”(
381)
153/
4”(4
00)
173/
4”(4
51)
103/
16”(
259)
24”(
610)
243/
4”(6
29)
263/
4”(6
80)
193/
16”(
487)
ELEVATION SYMBOL LEGEND:VALUES IN () ARE IN MILLIMETER CONVERSIONS.VALUES IN [] ARE NUMBER OF DAYLIGHT OPENINGS PER UNIT.
Double-Hung Windows
W-2500
SCALE: 1/4” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-50
GLAZING OPTIONS
INTERIOR GLAZING OPTIONS
5/8”3/32”
SS//SS
DOUBLEHUNG
5/8”1/8”
DS//DS
DOUBLEHUNG
5/8”3/32”
CA URBAN FIRE CODE
DOUBLEHUNG
1/8”
W-2500
Double-Hung Windows
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-51
JAMB EXTENDER OPTIONS
6 9/16” WALL9/16” JAMB THICKNESS
(OPTION)
9 5/16” WALLMAX 1-PC
JAMB EXTENDER
9/16” [14]
2” [51]
6 9/16” [167]
9/16” [14]
9 5/16” [237]
10 9/16” WALL
10 9/16” [268]
4 3/4” [121]
MAX WALL DEPTH
JAMB EXTENDER OPTIONS
W-2500
Double-Hung Windows
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-52
STANDARD MULLION OPTIONS
TWIN OPERATING DOUBLE HUNGWITH 3/4” SOLID SPREAD MULL
2 1/8” [54]
6 3/32” [155]
3 1/4” [83]
OPERATING DOUBLE HUNGWITH DIRECT SET GEO
OPERATING DOUBLE HUNGWITH DIRECT SET RADIUS
1 1/4” [32]
3 3/4” [95]
2 25/32” [71]
1 1/4” [32]3 3/4” [95]
2 25/32” [71]
1 3/8”3 3/16” 1 3/8”3 3/16”
W-2500
Double-Hung Windows
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-53
STANDARD MULLION OPTIONS
TWIN OPERATING DOUBLE HUNG
OPERATING DOUBLE-HUNG BESIDEIN-SASH PICTURE/TRANSOM BESIDE
7/8” [22]
4 13/16” [122]
3 3/8” [86]
OPERATING DOUBLE HUNGWITH IN-SASH PICTURE/TRANSOM
1 3/8” [35]
5 11/32” [136]
2 7/8” [73]
1 3/8” [35]
5 5/16” [135]
2 1/2” [64]
1 1/4” [32]
4 15/32” [114]
2 19/32” [66]
3 3/16”
1 3/8”
IN-SASH PICTURE/TRANSOM IN-SASH PICTURE/TRANSOM
W-2500
Double-Hung Windows
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-54
LITE CUT INFORMATION
UNEVEN
GOTHIC
VERTICAL PRAIRIE
RADIUSDIAMOND
RECTANGULAR
BAR ALIGNMENT
Alignment of divided lite muntin bars from one window to the
next is often required by fine architectural design. Wood
grilles, GBG’s, and Simulated Divided Lites may be specified
with muntin bars aligned.
LITE CUT OPTIONS
Special lite cut patterns can include a wide
variety of straight line and radius patterns.
The illustrations shown here represent just a
few of the possibilities. Rectangular,
horizontal, vertical and Prairie lite patterns
are available in all standard size clad double
hung windows. Uneven, diamond, radius
and Gothic lite cuts are available, subject to
approval. Approvals are based on the ability
to fulfill the design requirement while
maintaining the construction integrity of the
finished product.
Clad double hung windows are available with removable grilles in 7/8” Full surround or beaded SDL only, 5/8” flator 23/32” contour grilles between the glass (GBG) and Simulated Divided Lites. Standard lite cuts are rectangular,.
W-2500
Double-Hung Windows
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-55
DIVIDED LITE OPTIONS
NOTES:ALL GLASS AND AIRSPACE DIMENSIONS PER CURRENT CARDINAL GLASS SPECSLITES WITH SHAPES, ANGLES, OR RADII OUTSIDE THE LISEC BENDERCAPABILITIES FOR STAINLESS STEEL WARM EDGE SPACER WILL HAVEALUMINUM BOX SPACER WITH THE SAME AIRSPACE DIMENSION SHOWN HERE
5/8” GRILLE 23/32” GRILLE
0.625 0.709
0.156
7/8” SDL
0.625
0.2500 0.2500
5/8” GRILLE 23/32” GRILLE
0.187 0.217
7/8” SDL
0.187
0.2500 0.2500
0.150 0.156
0.625 0.709 0.625
W-2500
Double-Hung Windows
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-56
DRIP CAP & NAILING FLANGE
STANDARD OFFERING
ROUGH OPENING IS ALWAYS 3/4” OVERROUGH OPENING:
FRAME SIZE OF THE WINDOW
EXTREME SIZE OF THE WINDOW
UNITS WITH NO TRIM AND SILL NOSE:
(DRIP CAP & NAILING FLANGE ARENOT ADDED TO ANY UNIT SIZING)
MASONRY OPENING IS ALWAYS 1/2” OVERTHE UNIT SIZE OF THE WINDOW
WITH OR WITHOUT TRIM
UNIT SIZE IS ALWAYS THE
UNIT SIZE = FRAME SIZE
MASONRY OPENING:
GENERAL NOTES:
FRAME TO TRIMDIMENSIONS
TYPICAL FOR HEAD & SIDES
NON-STANDARD UNIT SIZINGEXTERIOR TRIM MUST USE SILL NOSE
FRAME = UNIT SIZEUNIT SIZE
UN
ITSI
ZEFR
AM
E=
UN
ITSI
ZEHORIZONTAL
ROUGH OPENING
3/8” [10]3/8” [10]
3/4” [19]
VER
TIC
AL
RO
UG
HO
PEN
ING
&A
DA
MS
CA
SIN
GFR
AM
E+
41/
16”
[104
]
31/
2”FL
AT
CA
SIN
G
FRA
ME
+2
9/16
”[6
5]BR
ICK
MO
ULD
UN
ITSI
ZE
UN
ITSI
ZE
& ADAMS CASING3 1/2” FLAT CASING
UNIT SIZE
FRAME + 3” [76]
UNIT SIZEBRICKMOULD
FRAME + 6” [152]
1 1/2” [38]BRICKMOULD
3” [76]3” FLAT &ADAMS CASING
UNIT SIZING, ROUGH OPENINGS& MASONRY OPENINGS
W-2500
Double-Hung Windows
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-57
REVERSE COTTAGE WINDOW
COTTAGE & REVERSE COTTAGEConsult the Design Data Tables for clear opening information. For dimensional units, contact Jeld-Wen - Bend Window Division, Technical ServicesDepartment for clear opening information.
DOUBLE HUNG WINDOW
COTTAGE WINDOW
CLEAR OPENING FORMULA
Frame Width - 3 3/8” = Clear Opening
DOUBLE HUNG
VERTICAL
HORIZONTAL
CLEAR OPENING
2 27/64” [62]
CLEAR OPENING
1 11/16” [43]1 11/16” [43]
CLEAR OPENING
1 11/16” [43]1 11/16” [43]
CLEAR OPENING
1 11/16” [43]1 11/16” [43]
2 27/64” [62]
CLEAR OPENING
2 27/64” [62]
CLEAR OPENING
(Frame Height / 2) - 3 15/16” = Clear Opening
CLEAR OPENING LAYOUTDP35 SILL
W-2500
Double-Hung Windows
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-58
VERTICAL SECTION
Day
light
Ope
ning
Gla
ssSi
ze
Sash
Size
Fram
eSi
ze
Roug
hO
peni
ng
1/2”
1”
1 11/16”
3/4”1/2”
3/4”
Day
light
Ope
ning
Gla
ssSi
ze
Sash
Size
Scre
enSi
ze
Uni
tSi
ze
1 1/4”
5 13/16”
4 9/16”
1 1/4”
5 13/16”
4 9/16”2”
1/2”
3/4”
2 5/16”
1/2”13/16”
SINGLE UNITS
Double-Hung Windows
W-2500
SCALE: 6” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-59
HORIZONTAL SECTION
Daylight Opening
Glass Size
Sash Size
Frame Size
Rough Opening
3/8” 3/8”
1/2” 1/2”
3/4”
1 7/16”
3/4”
1 7/16”
1 1/4”
5 13/16”
4 9/16”
1 1/4”
5 13/16”
4 9/16”
Sash Size
Glass Size
Screen Size
Unit Size
3/4”
1/2”
2 5/16”
3/4”
2 5/16”
1/2”
SINGLE UNITS
Double-Hung Windows
W-2500
SCALE: 6” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-60
HORIZONTAL SECTION
Daylight Opening
Glass Size
Sash Size
Frame Size
Rough Opening
3/8” 3/8”
1/2” 1/2”
3/4”
1 7/16”
3/4”
1 7/16”
1 1/4”
5 13/16”
4 9/16”
1 1/4”
5 13/16”
4 9/16”
Sash Size
Glass Size
Screen Size
Unit Size
3/4”
3/8”
2 7/16”
3/4”
2 7/16”
3/8”
DOUBLE-HUNG UNITSWITH CONCEALED JAMB LINER
Double-Hung Windows
W-2500
SCALE: 6” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-61
VERTICAL SECTION
Day
light
Ope
ning
Gla
ssSi
ze
Sash
Size
Fram
eSi
ze
Roug
hO
peni
ng
1/2”
3/4”
1 5/8”
2 1/16”
1/2”
Day
light
Ope
ning
Gla
ssSi
ze
Sash
Size
Scre
enSi
ze
Uni
tSi
ze
1 1/4”
5 13/16”
4 9/16”
5 13/16”
4 9/16”
2”
1/2”
2 1/16”
1/2”
13/16”
3/4”2 5/16”
DOUBLE-HUNG UNITSWITH TRADITIONAL SASH PACK
Double-Hung Windows
W-2500
SCALE: 6” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-62
HORIZONTAL SECTION
Daylight Opening
Glass Size
Sash Size
Frame Size
Rough Opening
3/8” 3/8”
1/2” 1/2”
1 1/4”
1 7/16”
1 1/4”
1 7/16”
1 1/4”
5 13/16”
4 9/16”
1 1/4”
5 13/16”
4 9/16”
Daylight Opening
Sash Size
Glass Size
Screen Size
Unit Size
1/2” 1/2”
1 1/4”
1/2”
2 5/16”
1 1/4”
2 5/16”
1/2”
DOUBLE-HUNG UNITSWITH TRADITIONAL SASH PACK
Double-Hung Windows
W-2500
SCALE: 6” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-63
HORIZONTAL SECTION
1 3/8”
5 13/16”
2 1/2”
5 5/16”
DOUBLE-HUNG UNITS - MULLION
Double-Hung Windows
W-2500
SCALE: 6” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-64
VERTICAL SECTION
Day
light
Ope
ning
Gla
ssSi
ze
Sash
Size
Fram
eSi
ze
Roug
hO
peni
ng
3/4”1 1/4”
5 13/16”
4 9/16”
1 1/4”
5 13/16”
4 9/16”
Uni
tSi
ze
1/2”
3/4”
11/16”
1 11/16”
3/4”
1/2”
IN-SASH PICTURE/TRANSOM
Double-Hung Windows
W-2500
SCALE: 6” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-65
HORIZONTAL SECTION
Daylight Opening
Glass Size
Sash Size
Frame Size
Rough Opening
1/2”
1 7/16”
3/4”
1 7/16”
3/4”
1/2”
3/8” 3/8”
1 1/4”
5 13/16”
4 9/16”
1 1/4”
5 13/16”
4 9/16”
Unit Size
IN-SASH PICTURE/TRANSOM
Double-Hung Windows
W-2500
SCALE: 6” = 1’
Architectural Detail ManualApril 2013 JELD-WEN reserves the right to change specifications without notice. Page 2-66
HORIZONTAL SECTION
1 3/8”
5 13/16”
2 1/2”
5 5/16”
IN-SASH PICTURE/TRANSOMMULLION
Double-Hung Windows
W-2500
SCALE: 6” = 1’
