1

Double Joint Arm Short (360mm) - images6.static-thomann.de · Each ball joint has a 5/8" pin with a 3/8"-16 female thread, making it easy to mount and position lights, cameras,

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Double Joint Arm Short (360mm) - images6.static-thomann.de · Each ball joint has a 5/8" pin with a 3/8"-16 female thread, making it easy to mount and position lights, cameras,

ouble Joint Arm Short (360mm)

Visit www.9.solutions for more info.

5/8” pin with 3/8”-16 female thread.

pin with 3/8”-16 emale thread.

Single-point tightening mechanism locks both ball joints simultaneously.

The Double Joint Arm has ball joints on both ends that are locked into position by a single-point tightening mechanism.

Each ball joint has a 5/8" pin with a 3/8"-16 female thread, making it easy to mount and position lights, cameras, monitors, or a wide variety of equipment at any angle.

Please always follow the safety standards and regulations of the given country where the product is being used.

Item: 9.VD5089S

The Double Joint Arm comes in four sizes:

Double Joint Arms should be mounted in a secure 5/8” receptacle, such as the 9.Solutions’ Barracuda Clamp.

Double Joint Arm Short (360mm)

s for purchasing a 9.Solutions product. With great passion, e design our products to be as versatile as possible. We hope

products contribute to your creative vision.

y,

.Solutions Team

Visit www.9.solutions for more info.

Double Joint Arm Short (260mm)Double Joint Arm Short (360mm)

SPECIFICATIONS:

Weight: 680 gLength: 360mmMax Load: 14 kgConnection(s): (2x) 5/8” Pin with 3/8”-16 Female ThreadPackage Contents:(1x) Double Joint Arm Short (360mm)

Please always follow the safety standards and regulations of the given country where the product is being used.

The Double Joint Arm comes in four sizes:

Double Joint Arms should be mounted in a secure 5/8” receptacle, such as the 9.Solutions’ Barracuda Clamp.

Thanks for purchasing a 9.Solutions product. With great passion, we design our products to be as versatile as possible. We hope that our products contribute to your creative vision.

Sincerely,

The 9.Solutions Team

The Double Joint Arm has ball joints on both ends that are locked into position by a single-point tightening mechanism.

Each ball joint has a 5/8" pin with a 3/8"-16 female thread, making it easy to mount and position lights, cameras, monitors, or a wide variety of equipment at any angle.

5/8” pin with 3/8”-16 female thread.

5/8” pin with 3/8”-16 female thread.

Single-point tightening mechanism locks both ball joints simultaneously.

Item: 9.VD5089S