Dovetail Cutter with reversible T.C. tips Z2 · 2018-08-22 · PU = packing unit = supplement Z = number of cutting edges = popular size, ex stock 6.02 = while stocks last Dovetail

PU = packing unit = supplement

Z = number of cutting edges

= popular size, ex stock = while stocks last6.02

Dovetail Cutter with reversible T.C. tips Z222726

€p.pc.

Part-No.Shankmm

L₁mm

AngleL₂mm

Dmm

22726-5-28000-R12 x 407015°2628

Technical details:Tool body with 2 reversible T.C. tips HW 03 bevelled on both sides.Stop pin for easy adjustment when turning or exchanging the tips.Right-hand rotation. For manual and mechanical feed.

Application:For cutting dovetails, bevelling 15°, as well as for special applications insolid surface material (e.g. Corian).

€ p.pc.PUSpare parts / Accessories

1072015-6-02703-R27 x 9 x 1,5 mm, HW 03Reversible T.C. tip1039080-0-03548-RM 3,5 x 4,8, T15Torx clamping screw

539077-0-04015-1T15, with flagTorx key

Vari-Angle Cutterhead with reversible T.C. tips Z222095 continuously adjustable

€p.pc.

Part-No.€p.pc.

Part-No.Shankmm

L₁mm

L₂mm

Dmax

mmDmm

Right-hand rotationLeft-hand rotation22095-5-00004-R-¾"x 55 m. E. M 8 9540102 8522095-5-00005-R-20 x 55 m. E. M 8 9540102 8522095-5-00006-R22095-5-00006-L25 x 55 m. E. M 8 9540102 85

22095-5-00505-R-20 x 55 m. E. M 81145013411022095-5-00506-R22095-5-00506-L25 x 55 m. E. M 811450134110

Technical details:With 2 reversible T.C. tips in swivelling tip retainers. Cutting on periphery and on both sides. Swivellingrange towards the top 0-45°, towards the bottom 0-90°, continuously variable adjustment accordingto precise scale. Grid step 7,5°. No displacement of the adjusted bevelling angle when fixing the tipretainers. For manual and mechanical feed.

Application:For jointing, rebating and bevelling of wood and various kinds of wood composites and boards onCNC-machines and stationary routers.


1072014-6-04000-040 x 12 x 1,5 mm, 4-sided, HW 02Reversible T.C. tip1072014-6-05000-050 x 12 x 1,5 mm, 4-sided, HW 02Reversible T.C. tip

1072014-6-05000-F50 x 12 x 1,5 mm, 4-sided, HW 01Reversible T.C. tip239095-0-04001-040 mmClamping wedge

239095-0-05001-050 mmClamping wedge1039165-0-05016-RM 5 x 16 ISO 4762Clamping screw

139095-0-00003-01 clamping screw a. 2 clamping wedgesClamping set1039266-0-06008-RM 6 x 8 ISO 4028Allen screw

139140-0-00401-0SW 4Key with T-handle539120-0-03000-0SW 3Allen key

139140-0-00302-0SW 3Key with T-handle

= popular size, ex stock = while stocks last


Z = number of cutting edges6.1

jso_mit_Preisen_en.indd 163 10.04.13 11:05

Bevel Cutter with reversible T.C. tips Z222170

€p.pc.

Part-No.Shank mm

L₁ mm

L₃ mm

L₂ mm

Angle D/d mm

22170-5-45005-R20 x 55 m. E. M 895284045°74/18 22170-5-45006-R25 x 55 m. E. M 895284045°74/18

Technical details:Tool body with 2 reversible T.C. tips. Cutting on periphery only. Right-hand rotation. For mechanical feed.

Application:For bevelling in various kinds of wood composites and panel materials on CNC machines andstationary routers.


1072010-6-04001-040 x 12 x 1,5 mm, 2-sided, HW 02Reversible T.C. tip 1039076-0-04000-RM 4 x 5,9, T15Torx clamping screw

139077-0-04015-2T15, with handleTorx key

Spare tips in different T.C. grades on page 10.2.

Bevel/Folding Cutter with reversible T.C. tip Z1

For mitre folding in chipboard rather α = 91° thanα = 90° should be used. HW 01 = for MDF and extremely abrasivematerial HW 02 = standard grade

22180 €p.pc.

Part-No.Shank mm

L₁ mm

L₃ mm

L₂ mm

Angle D mm

22180-5-00455-R20 x 55 m. E. M 81154346,445°43 22180-5-00456-R25 x 55 m. E. M 8 22180-5-00606-R25 x 55 m. E. M 81183541,560°41,5 22180-5-50904-R¾"x 55 m. E. M 8 932536,490°50 22180-5-50905-R20 x 55 m. E. M 8 22180-5-50906-R25 x 55 m. E. M 8 22180-5-50004-R¾"x 55 m. E. M 8 932536,491°50 22180-5-50005-R20 x 55 m. E. M 8 22180-5-50006-R25 x 55 m. E. M 8

Technical details:Tool body with 1 reversible T.C. tip, HW 02, bevelled on both sides. Precise centre point on bottom.Stop pin for easy adjustment when turning or exchanging the tips. Right-hand rotation. For mechanical feed.

Application:For bevelling, decorative grooving and mitre folding in various kinds of wood composites and panelmaterials on CNC machines.


1072015-6-04015-R40 x 12 x 1,5 mm, HW 01, for = 90°+91°Reversible T.C. tip 1072015-6-04001-R40 x 12 x 1,5 mm, HW 01, for = 90°+91°Reversible T.C. tip

1072015-6-05060-R50 x 12 x 1,5 mm, HW 01, for = 60°Reversible T.C. tip 1072015-6-05001-R50 x 12 x 1,5 mm, HW 01, for = 60°Reversible T.C. tip

1072015-6-06045-R60 x 12 x 1,5 mm, HW 02, for = 45°Reversible T.C. tip 1039076-0-04040-RM 4 x 4 extra-large head, T15Torx clamping screw


PU = packing unit = supplement Z = number of cutting edges


Decorative Groove Cutter with reversible T.C. tip Z1

Technical details:Tempered tool body, supplied with one reversibleT.C. tip for profile No. 1 as basic equipment. T.C.tip with shear cut from top. The basic tip can beprofiled on one side. Maximum depth of profileaccording to illustration below. Right-handrotation. For mechanical feed.

Application:For decorative grooving, lettering and engraving,rounding over of edges, etc.

* Set consisting of:

1 pc. Decorative Groove Cutter with tip No. 11 pc. Profile tip f.profiles Nos. 2/3/41 pc. Profile tip f.profile No. 51 pc. Profile tip f.profiles Nos. 6/7/81 pc. Profile tip f.profile No. 101 pc. Profile tip f.profile No. 111 pc. Profile tip f.profile No. 121 pc. TORX key T151 pc. TORX clamping screw

22195€p.pc.

Part-No.Shankmm

L₁mm

Amm

L₃mm

Dmm

Basic tool body with tip No. 122195-5-17000-R10 x 4067278,317

Set in wooden case, consisting of:22195-5-00000-R7 tips*altogether withTool body

Reversible T.C. tips€p.pc.

PUPart-No.For profile No.DimensionsB x H x S mm

Standard tips1072014-6-01201-01 (basic equipment)12 x 12 x 1,5172190-6-00004-R2/3/4172190-6-00005-R5172190-6-00008-R6/7/8172190-6-00009-R9172190-6-00010-R10172190-6-00011-R11172190-6-00012-R12

Special profiles272190-6-00000-Rup to D = 17 mmSpecial profile tip

Quantity discounts, ordering same profile: 5 - 9 pcs. = 12%, up from 10 pcs. = 25 %.Template costs: up to 9 pcs. only. Repeat orders of same profile: no template costs.


1039081-0-04048-RM 4 x 4,8 T15Torx clamping screw539077-0-04015-1T15, with flagTorx key

The profile tips Nos. 10/11/12 can only be mounted in basic tool bodies supplied since December1998.




jso_mit_Preisen_en_1904.indd 164 19.04.13 11:41

Bevel Cutter with reversible T.C. tips Z222170

€p.pc.

Part-No.Shankmm

L₁mm

L₃mm

L₂mm

AngleD/dmm

22170-5-45005-R20 x 55 m. E. M 895284045°74/1822170-5-45006-R25 x 55 m. E. M 895284045°74/18

Technical details:Tool body with 2 reversible T.C. tips. Cutting on periphery only. Right-hand rotation.For mechanical feed.

Application:For bevelling in various kinds of wood composites and panel materials on CNC machines andstationary routers.


1072010-6-04001-040 x 12 x 1,5 mm, 2-sided, HW 02Reversible T.C. tip1039076-0-04000-RM 4 x 5,9, T15Torx clamping screw


Spare tips in different T.C. grades on page 10.2.

Bevel/Folding Cutter with reversible T.C. tip Z1

HW 01 = for MDF and extremely abrasivematerialHW 02 = standard grade

22180€p.pc.

Part-No.Shankmm

L₁mm

L₃mm

L₂mm

AngleDmm

22180-5-00455-R20 x 55 m. E. M 81154346,445°4322180-5-00456-R25 x 55 m. E. M 822180-5-00606-R25 x 55 m. E. M 81183541,560°41,522180-5-50904-R¾"x 55 m. E. M 8 932536,490°5022180-5-50905-R20 x 55 m. E. M 822180-5-50906-R25 x 55 m. E. M 822180-5-50004-R¾"x 55 m. E. M 8 932536,491°5022180-5-50005-R20 x 55 m. E. M 822180-5-50006-R25 x 55 m. E. M 8

For mitre folding in chipboard rather α = 91° than α = 90° should be used.

Technical details:Tool body with 1 reversible T.C. tip, HW 02, bevelled on both sides. Precise centre point on bottom.Stop pin for easy adjustment when turning or exchanging the tips. Right-hand rotation.For mechanical feed.

Application:For bevelling, decorative grooving and mitre folding in various kinds of wood composites and panelmaterials on CNC machines.


1072015-6-04015-R40 x 12 x 1,5 mm, HW 01, for = 90°+91°Reversible T.C. tip1072015-6-04001-R40 x 12 x 1,5 mm, HW 01, for = 90°+91°Reversible T.C. tip

1072015-6-05060-R50 x 12 x 1,5 mm, HW 01, for = 60°Reversible T.C. tip1072015-6-05001-R50 x 12 x 1,5 mm, HW 01, for = 60°Reversible T.C. tip

1072015-6-06045-R60 x 12 x 1,5 mm, HW 02, for = 45°Reversible T.C. tip1039076-0-04040-RM 4 x 4 extra-large head, T15Torx clamping screw






Technical details:Tempered tool body, supplied with one reversibleT.C. tip for profile No. 1 as basic equipment. T.C.tip with shear cut from top. The basic tip can beprofiled on one side. Maximum depth of profileaccording to illustration below. Right-handrotation. For mechanical feed.

Application:For decorative grooving, lettering and engraving,rounding over of edges, etc.

* Set consisting of:

1 pc. Decorative Groove Cutter with tip No. 11 pc. Profile tip f.profiles Nos. 2/3/41 pc. Profile tip f.profile No. 51 pc. Profile tip f.profiles Nos. 6/7/81 pc. Profile tip f.profile No. 101 pc. Profile tip f.profile No. 111 pc. Profile tip f.profile No. 121 pc. TORX key T151 pc. TORX clamping screw

22195€p.pc.

Part-No.Shankmm

L₁mm

Amm

L₃mm

Dmm

Basic tool body with tip No. 122195-5-17000-R10 x 4067278,317

Set in wooden case, consisting of:22195-5-00000-R7 tips*altogether withTool body


PUPart-No.For profile No.DimensionsB x H x S mm

Standard tips1072014-6-01201-01 (basic equipment)12 x 12 x 1,5172190-6-00004-R2/3/4172190-6-00005-R5172190-6-00008-R6/7/8172190-6-00009-R9172190-6-00010-R10172190-6-00011-R11172190-6-00012-R12

Special profiles272190-6-00000-Rup to D = 17 mmSpecial profile tip



1039081-0-04048-RM 4 x 4,8 T15Torx clamping screw539077-0-04015-1T15, with flagTorx key

The profile tips Nos. 10/11/12 can only be mounted in basic tool bodies supplied since December1998.






€p.pc.

Part-No.Shankmm

L₁mm

L₃mm

Dmm

22196-5-00024-R12 x 408811,824

Technical details:Tool body supplied with 1 reversible T.C. tip for 92° decorative grooves or 46° bevels. Can be profiledon one side within the area available for profiling.

Application:For decorative grooving, lettering, etc., as well for bevelling or rounding over of edges.


1072018-6-01700-017 x 17 x 2 mmReversible T.C. tip1039076-0-04000-RM 4 x 5,9, T15Torx clamping screw

139077-0-04015-2T15, with handleTorx key272196-6-00000-R17 x 17 x 2 mmSpecial profile tip


with circular tipCove Cutter with replaceable T.C. tip Z122280 interchangeable shank type

€p.pc.

Part-No.Shankmm

L₁mm

L₂mm

Rmm

Dmm

22286-5-06300-R12576,356,3512,722286-5-08000-R1260881622286-5-09500-R12639,59,519

Technical details:Tool body with 1 replaceable circular T.C. tip. For manual and mechanical feed. Right-hand rotation.

Application:For cutting of cove and core box profiles, for use on stationary routers and CNC machines.

Four-times the tool life: Just by unscrewing the clamping screw and turning the circular tipyou can easily change over to a new ready-for-operation area once a part of the tip hasbecome blunt or damaged.


172680-6-06300-0R= 6,35 mmCircular tip T.C.172680-6-08000-0R= 8 mmCircular tip T.C.

172680-6-09500-0R= 9,5 mmCircular tip T.C.1039082-0-03565-RM 3,5 x 6,5, T15Torx clamping screw





Rounding Over and Bevel Cutter T.C. Z2

Technical details:Tool body with 2 interchangeable T.C. tips.In the same body either rounding over tips ofdifferent radii or 45° bevelling tips can be used.Right-hand rotation.For mechanical feed.

Application:For one-or both-side rounding over or bevellingin solid wood or various kinds of panel materialson stationary routers or CNC machines.

R = 15 to 30 mm see page 6.24.

22160€p.pc.

Part-No.Shankmm

L₃mm

L₁mm

R/Anglemm/°

SizeDmm

22160-5-00020-R16 x 60 m. E. M 6-100 214022160-5-00030-R16 x 60 m. E. M 6-100 314022160-5-00040-R16 x 60 m. E. M 6-100 414022160-5-00050-R16 x 60 m. E. M 6-100 514022160-5-00045-R16 x 60 m. E. M 6610045°140

22160-5-20060-R20 x 55 m. E. M 8-120 626022160-5-20080-R20 x 55 m. E. M 8-120 826022160-5-20100-R20 x 55 m. E. M 8-1201026022160-5-20120-R20 x 55 m. E. M 8-1201226022160-5-20045-R20 x 55 m. E. M 8912045°260

Set in wooden case consisting of:22160-5-00000-R*10 tipsw.a total of Size 1Tool body22160-5-20000-R*10 tipsw.a total of Size 2Tool body

* Set consisting of:Size 1: Basic tool body and 2 tips each R 2/3/4/5 mm and 45°, TORX screws and TORX-key.Size 2: Basic tool body and 2 tips each R 6/8/10/12 mm and 45°, TORX screws and TORX-key.


122160-0-00000-Rwithout tipsBasic tool body size 1122160-0-20000-Rwithout tipsBasic tool body size 2

272432-6-00020-015 x 18 x 2 mm, R = 2 mmRounding over tip272432-6-00030-015 x 18 x 2 mm, R = 3 mmRounding over tip


272434-6-10045-015 x 18 x 2 mm, 45°Bevelling tip272432-6-20060-030 x 25 x 2 mm, R = 6 mmRounding over tip


272432-6-20120-030 x 25 x 2 mm, R = 12 mmRounding over tip272434-6-20045-R30 x 25 x 2 mm, 45°Bevelling tip

1039081-0-04050-RM 4 x 5, T15 (f. size 1)Torx clamping screw1039076-0-04000-RM 4 x 5,9, T15 (f. size 2)Torx clamping screw







€p.pc.

Part-No.Shankmm

L₁mm

L₃mm

Dmm

22196-5-00024-R12 x 408811,824

Technical details:Tool body supplied with 1 reversible T.C. tip for 92° decorative grooves or 46° bevels. Can be profiledon one side within the area available for profiling.

Application:For decorative grooving, lettering, etc., as well for bevelling or rounding over of edges.


1072018-6-01700-017 x 17 x 2 mmReversible T.C. tip1039076-0-04000-RM 4 x 5,9, T15Torx clamping screw

139077-0-04015-2T15, with handleTorx key272196-6-00000-R17 x 17 x 2 mmSpecial profile tip


with circular tipCove Cutter with replaceable T.C. tip Z122280 interchangeable shank type

€p.pc.

Part-No.Shankmm

L₁mm

L₂mm

Rmm

Dmm

22286-5-06300-R12576,356,3512,722286-5-08000-R1260881622286-5-09500-R12639,59,519

Technical details:Tool body with 1 replaceable circular T.C. tip. For manual and mechanical feed. Right-hand rotation.

Application:For cutting of cove and core box profiles, for use on stationary routers and CNC machines.

Four-times the tool life: Just by unscrewing the clamping screw and turning the circular tipyou can easily change over to a new ready-for-operation area once a part of the tip hasbecome blunt or damaged.


172680-6-06300-0R= 6,35 mmCircular tip T.C.172680-6-08000-0R= 8 mmCircular tip T.C.

172680-6-09500-0R= 9,5 mmCircular tip T.C.1039082-0-03565-RM 3,5 x 6,5, T15Torx clamping screw





Rounding Over and Bevel Cutter T.C. Z2

Technical details:Tool body with 2 interchangeable T.C. tips.In the same body either rounding over tips ofdifferent radii or 45° bevelling tips can be used.Right-hand rotation.For mechanical feed.

Application:For one-or both-side rounding over or bevellingin solid wood or various kinds of panel materialson stationary routers or CNC machines.

R = 15 to 30 mm see page 6.24.

22160€p.pc.

Part-No.Shankmm

L₃mm

L₁mm

R/Anglemm/°

SizeDmm

22160-5-00020-R16 x 60 m. E. M 6-100 214022160-5-00030-R16 x 60 m. E. M 6-100 314022160-5-00040-R16 x 60 m. E. M 6-100 414022160-5-00050-R16 x 60 m. E. M 6-100 514022160-5-00045-R16 x 60 m. E. M 6610045°140

22160-5-20060-R20 x 55 m. E. M 8-120 626022160-5-20080-R20 x 55 m. E. M 8-120 826022160-5-20100-R20 x 55 m. E. M 8-1201026022160-5-20120-R20 x 55 m. E. M 8-1201226022160-5-20045-R20 x 55 m. E. M 8912045°260

Set in wooden case consisting of:22160-5-00000-R*10 tipsw.a total of Size 1Tool body22160-5-20000-R*10 tipsw.a total of Size 2Tool body

* Set consisting of:Size 1: Basic tool body and 2 tips each R 2/3/4/5 mm and 45°, TORX screws and TORX-key.Size 2: Basic tool body and 2 tips each R 6/8/10/12 mm and 45°, TORX screws and TORX-key.


122160-0-00000-Rwithout tipsBasic tool body size 1122160-0-20000-Rwithout tipsBasic tool body size 2



272434-6-10045-015 x 18 x 2 mm, 45°Bevelling tip272432-6-20060-030 x 25 x 2 mm, R = 6 mmRounding over tip


272432-6-20120-030 x 25 x 2 mm, R = 12 mmRounding over tip272434-6-20045-R30 x 25 x 2 mm, 45°Bevelling tip

1039081-0-04050-RM 4 x 5, T15 (f. size 1)Torx clamping screw1039076-0-04000-RM 4 x 5,9, T15 (f. size 2)Torx clamping screw






with reversible/interchangeable tipsRounding Over/Bevelling Set Z264410 complete setWith this toolset it is possible to combine jointing, rounding over and bevel cutters in various ways.In conjunction with different shank type arbors, the set can be used on all stationary routers andCNC machines in common use. Adaption to the thickness of material to be worked through faceground spacers.

Technical details:Steel tool body with 2 reversible, respectively interchangeable T.C. tips each. Constant cutting circlediameter. Without wedges. Tempered, thoroughly balanced arbors, with feather key to ensurepositive drive. For mechanical feed.R.P.M. max. = 12 000

Special advantages:● Large chip clearance area and consequently enhanced chip removal made possible by tips clamp

without wedges.● Improved balancing quality because of less components.● All cutters with compressive cut, jointing cutter with shear angle.● 2 equal radii in the tip (respectively with bevel on both sides), thereby doubling tool life.● Easy to operate, using the same tips in the top and bottom cutter.● It is possible to use tips of various radii respectively bevelling tips in the same basic tool body

(sizes 1, 2, 3 - as shown below).● Useable for either right-hand or left-hand rotation, just by turning the complete set on the arbor

(not possible with MK 2 shanks).● Only 3 jointing cutters (25, 40, 50 mm) for materials of 13 - 59 mm thickness.

Spacer set€p.pc.

Part-No.KNmm

Dmm

dmm

39548-0-00001-16 x 1,53520

Consisting of 5 x 5,0 / 2 x 2,0 / 4 x 1,0 / 3 x 0,5 / 5 x 0,1 mm.The spacer set is sufficient for materials of any thickness and all clamping lengths.

Single spacers on page 3.24.




with reversible/interchangeable tipsRounding Over/Bevelling Set Z264412-418 Rounding over/bevel/jointing cutters

€p.pc.

Part-No.for size/L₃ mm

R/mm/°

D x L₂ x dmm

Jointing cutter64418-5-00025-0-- 80 x 25 x 2064418-5-00040-0- 80 x 40 x 2064418-5-00050-0- 80 x 50 x 20

Rounding over cutter64412-5-00020-01 / - 2 92 x 15 x 2064412-5-00030-0 3 92 x 15 x 2064412-5-00040-0 4 92 x 15 x 2064412-5-00050-0 5 92 x 15 x 2064412-5-00060-02 / - 6 98 x 22 x 2064412-5-00080-0 8 98 x 22 x 2064412-5-00100-03 / -10106 x 30,5 x 2064412-5-00120-012106 x 30,5 x 20

Bevelling cutter64414-5-10045-01 / 645° 92 x 15 x 2064414-5-20045-02 / 945° 98 x 22 x 2064414-5-30045-03 / 1245°106 x 30,5 x 20

Interchangeable T.C. tips€p.pc.

PUPart-No.L3 max

mmR/mm/°

Forsize

DimensionsB x H x S mm

Rounding over tips T.C.272432-6-00020-0- 2115 x 18 x 2272432-6-00030-0- 3272432-6-00040-0- 4272432-6-00050-0- 5

272432-6-00060-0- 6222 x 21 x 2272432-6-00080-0- 8

272432-6-20100-0-10330 x 25 x 2272432-6-20120-0-12272432-6-00100-1-103, top17,5 x 26 x 2**272432-6-00120-1-12272432-6-00100-2-103, bottom17,5 x 26 x 2**272432-6-00120-2-12

Bevelling tips T.C.272434-6-10045-0 645°115 x 18 x 2272434-6-20045-0 945°222 x 21 x 2272434-6-20045-R1245°330 x 25 x 2272434-6-30045-11245°3, top17,5 x 26 x 2**272434-6-30045-21245°3, bottom17,5 x 26 x 2**

Jointing tips, HW 031072010-6-02504-025 x 12 x 1,51072010-6-04004-040 x 12 x 1,51072016-6-05004-050 x 12 x 1,7*

* 3-hole design, 4-sided** for design up to 05/09


1039076-0-04000-RM 4 x 5,9, T15Torx clamping screw139077-0-04015-2T15, with handleTorx key





with reversible/interchangeable tipsRounding Over/Bevelling Set Z264410 complete setWith this toolset it is possible to combine jointing, rounding over and bevel cutters in various ways.In conjunction with different shank type arbors, the set can be used on all stationary routers andCNC machines in common use. Adaption to the thickness of material to be worked through faceground spacers.

Technical details:Steel tool body with 2 reversible, respectively interchangeable T.C. tips each. Constant cutting circlediameter. Without wedges. Tempered, thoroughly balanced arbors, with feather key to ensurepositive drive. For mechanical feed.R.P.M. max. = 12 000

Special advantages:● Large chip clearance area and consequently enhanced chip removal made possible by tips clamp

without wedges.● Improved balancing quality because of less components.● All cutters with compressive cut, jointing cutter with shear angle.● 2 equal radii in the tip (respectively with bevel on both sides), thereby doubling tool life.● Easy to operate, using the same tips in the top and bottom cutter.● It is possible to use tips of various radii respectively bevelling tips in the same basic tool body

(sizes 1, 2, 3 - as shown below).● Useable for either right-hand or left-hand rotation, just by turning the complete set on the arbor

(not possible with MK 2 shanks).● Only 3 jointing cutters (25, 40, 50 mm) for materials of 13 - 59 mm thickness.

Spacer set€p.pc.

Part-No.KNmm

Dmm

dmm

39548-0-00001-16 x 1,53520

Consisting of 5 x 5,0 / 2 x 2,0 / 4 x 1,0 / 3 x 0,5 / 5 x 0,1 mm.The spacer set is sufficient for materials of any thickness and all clamping lengths.

Single spacers on page 3.24.




with reversible/interchangeable tipsRounding Over/Bevelling Set Z264412-418 Rounding over/bevel/jointing cutters

€p.pc.

Part-No.for size/L₃ mm

R/mm/°

D x L₂ x dmm

Jointing cutter64418-5-00025-0-- 80 x 25 x 2064418-5-00040-0- 80 x 40 x 2064418-5-00050-0- 80 x 50 x 20

Rounding over cutter64412-5-00020-01 / - 2 92 x 15 x 2064412-5-00030-0 3 92 x 15 x 2064412-5-00040-0 4 92 x 15 x 2064412-5-00050-0 5 92 x 15 x 2064412-5-00060-02 / - 6 98 x 22 x 2064412-5-00080-0 8 98 x 22 x 2064412-5-00100-03 / -10106 x 30,5 x 2064412-5-00120-012106 x 30,5 x 20

Bevelling cutter64414-5-10045-01 / 645° 92 x 15 x 2064414-5-20045-02 / 945° 98 x 22 x 2064414-5-30045-03 / 1245°106 x 30,5 x 20

Interchangeable T.C. tips€p.pc.

PUPart-No.L3 max

mmR/mm/°

Forsize


Rounding over tips T.C.272432-6-00020-0- 2115 x 18 x 2272432-6-00030-0- 3272432-6-00040-0- 4272432-6-00050-0- 5

272432-6-00060-0- 6222 x 21 x 2272432-6-00080-0- 8

272432-6-20100-0-10330 x 25 x 2272432-6-20120-0-12272432-6-00100-1-103, top17,5 x 26 x 2**272432-6-00120-1-12272432-6-00100-2-103, bottom17,5 x 26 x 2**272432-6-00120-2-12

Bevelling tips T.C.272434-6-10045-0 645°115 x 18 x 2272434-6-20045-0 945°222 x 21 x 2272434-6-20045-R1245°330 x 25 x 2272434-6-30045-11245°3, top17,5 x 26 x 2**272434-6-30045-21245°3, bottom17,5 x 26 x 2**

Jointing tips, HW 031072010-6-02504-025 x 12 x 1,51072010-6-04004-040 x 12 x 1,51072016-6-05004-050 x 12 x 1,7*

* 3-hole design, 4-sided** for design up to 05/09







GBMRounding Over and Bevel Cutter T.C. Z1+1

Technical details:Tool body with 2 adjustable, interchangeableT.C. knives, for rounding over or bevellingapplications.In the same body, size 1 or size 2, eitherrounding over or 45° bevelling knives can beused. Right-hand rotation. For mechanical feed.

Application:For double-sided rounding over or bevellingoperations of solid wood or various kinds of panelmaterials on CNC machines.Cutting on periphery only, not applicable forplunge cutting.

22510€p.pc.

Part-No.Shankmm

L₁mm

L₂mm

Dmax

mmdmm

Basic tool body size 1 - without knives22510-0-00005-R20 x 55 m. E. M 811340342022510-0-00006-R25 x 55 m. E. M 8113403420

Basic tool body size 2 - without knives22510-0-00206-R25 x 55 m. E. M 8150505735



Interchangeable T.C. knives€p.pc.

Part-No.€p.pc.

Part-No.R/mm/°

Forsize


BottomTopRoundg.over knives-h₁=19-34mm,HW04

72510-6-40030-272510-6-40030-1R = 3140 x 17,2 x 2,272510-6-40040-272510-6-40040-1R = 4140 x 18,2 x 2,272510-6-40050-272510-6-40050-1R = 5140 x 19,2 x 2,272510-6-40060-272510-6-40060-1R = 6140 x 20,2 x 2,2

Bevelling knives-h₂ = 13-29 mm, HW 0472510-6-40450-272510-6-40450-145°140 x 20,2 x 2,2

Roundg.over knives-h₁= 35-56mm, HW0472510-6-50060-272510-6-50060-1R = 6250 x 20,3 x 2,272510-6-50080-272510-6-50080-1R = 8250 x 22,3 x 2,272510-6-50100-272510-6-50100-1R =10250 x 24,3 x 2,2

Bevelling knives-h₂= 22-43 mm, HW 0472510-6-50450-272510-6-50450-145°250 x 24,3 x 2,2

Blanks for special profiles, HW 04-72510-6-40000-0unprofiled140 x 20,8 x 2,272510-6-40000-272510-6-40000-1Special profile140 x 20,8 x 2,2-72510-6-50000-0unprofiled250 x 24,8 x 2,272510-6-50000-272510-6-50000-1Special profile250 x 24,8 x 2,2

Blanks for special profiles, HW 02-72510-6-40002-0unprofiled140 x 20,8 x 2,272510-6-40002-272510-6-40002-1Special profile140 x 20,8 x 2,2





mechanical feedUNITEC Universal Profile Cutter Z2

Technical details/Application:Basic tool body with interchangeable shank,screws for tips and covering screw. Suppliedwithout tips and without guide set. To be usedin conjunction with tips for beading, rebating,bevelling, coving, with standard or specialprofiles. Right-hand rotation.For mechanical feed.

Size 1:beading of R = 2/3/4/5 mmbevelling of 5 x 45°coving of R = 5 mmrebating of 19,4 mm

Size 2:beading of R = 6+8 mmbevelling of 8 x 45°coving of R = 6+8 mmrebating of 26 mmspecial profile tips

Size 3:beading of R = 10 mmbevelling of 10 x 45°coving of R = 10 mmrebating of 30 mmstandard-type or special profile tips

22140 basic tool body (without tips)€p.pc.

Part-No.Shankmm

L₂mm

ForD mm

Forsize

22145-0-26105-R1019,426122146-0-26105-R1222145-0-32108-R102632222146-0-32108-R1222145-0-36110-R103036322146-0-36110-R12


PUPart-No.Rmm

Forsize


Rounding over tip272140-6-00002-0 2119,4 x 9 x 1,5272140-6-00003-0 3272140-6-00004-0 4272140-6-00005-0 5272140-6-00006-0 6226 x 12,5 x 1,5272140-6-00008-0 8272140-6-00010-010330 x 14,5 x 1,5

Coving tip272145-6-00005-0 5119,4 x 9 x 1,5272145-6-00006-0 6226 x 12,5 x 1,5272145-6-00008-0 8272145-6-00010-010330 x14,5 x 1,5

Rebating tip272142-6-19500-04-sided119,4 x 9 x 1,5272142-6-26000-04-sided226 x 12,5 x 1,5272142-6-30000-04-sided330 x 14,5 x 1,5

Bevelling tip272148-6-19545-0L₃ = 5119,4 x 9 x 1,5272148-6-26045-0L₃ = 8226 x 12,5 x 1,5272148-6-30045-0L₃ =10330 x 14,5 x 1,5

Special profiles272149-6-26000-Rblank, 2-sided226,5 x 12,5 x 1,5272149-6-30000-Rblank, 2-sided330,5 x 14,5 x 1,5272149-6-26001-Rprofiled on both sides226 x 12,5 x 1,5272149-6-30001-Rprofiled on both sides330 x 14,5 x 1,5



1039081-0-04060-RM 4 x 6, T15, for D= 26 mmTorx clamping screw1039076-0-04000-RM 4 x 5,9, extra-large head, T15, f. D=32/36 mmTorx clamping screw

1039052-0-03500-RM 3,5 x 6,0 mmCovering screw539077-0-04015-1T15, with flagTorx key





GBMRounding Over and Bevel Cutter T.C. Z1+1

Technical details:Tool body with 2 adjustable, interchangeableT.C. knives, for rounding over or bevellingapplications.In the same body, size 1 or size 2, eitherrounding over or 45° bevelling knives can beused. Right-hand rotation. For mechanical feed.

Application:For double-sided rounding over or bevellingoperations of solid wood or various kinds of panelmaterials on CNC machines.Cutting on periphery only, not applicable forplunge cutting.

22510€p.pc.

Part-No.Shankmm

L₁mm

L₂mm

Dmax

mmdmm

Basic tool body size 1 - without knives22510-0-00005-R20 x 55 m. E. M 811340342022510-0-00006-R25 x 55 m. E. M 8113403420

Basic tool body size 2 - without knives22510-0-00206-R25 x 55 m. E. M 8150505735




Part-No.€p.pc.

Part-No.R/mm/°

Forsize


BottomTopRoundg.over knives- h₁=19-34mm,HW04

72510-6-40030-272510-6-40030-1R = 3140 x 17,2 x 2,272510-6-40040-272510-6-40040-1R = 4140 x 18,2 x 2,272510-6-40050-272510-6-40050-1R = 5140 x 19,2 x 2,272510-6-40060-272510-6-40060-1R = 6140 x 20,2 x 2,2

Bevelling knives -h₂ = 13-29 mm, HW 0472510-6-40450-272510-6-40450-145°140 x 20,2 x 2,2

Roundg.over knives-h₁= 35-56mm, HW0472510-6-50060-272510-6-50060-1R = 6250 x 20,3 x 2,272510-6-50080-272510-6-50080-1R = 8250 x 22,3 x 2,272510-6-50100-272510-6-50100-1R =10250 x 24,3 x 2,2

Bevelling knives -h₂= 22-43 mm, HW 0472510-6-50450-272510-6-50450-145°250 x 24,3 x 2,2

Blanks for special profiles, HW 04-72510-6-40000-0unprofiled140 x 20,8 x 2,272510-6-40000-272510-6-40000-1special profile140 x 20,8 x 2,2-72510-6-50000-0unprofiled250 x 24,8 x 2,272510-6-50000-272510-6-50000-1special profile250 x 24,8 x 2,2

Blanks for special profiles, HW 02-72510-6-40002-0unprofiled140 x 20,8 x 2,272510-6-40002-272510-6-40002-1special profile140 x 20,8 x 2,2





mechanical feedUNITEC Universal Profile Cutter Z2

Technical details/Application:Basic tool body with interchangeable shank,screws for tips and covering screw. Suppliedwithout tips and without guide set. To be usedin conjunction with tips for beading, rebating,bevelling, coving, with standard or specialprofiles. Right-hand rotation.For mechanical feed.

Size 1:beading of R = 2/3/4/5 mmbevelling of 5 x 45°coving of R = 5 mmrebating of 19,4 mm

Size 2:beading of R = 6+8 mmbevelling of 8 x 45°coving of R = 6+8 mmrebating of 26 mmspecial profile tips

Size 3:beading of R = 10 mmbevelling of 10 x 45°coving of R = 10 mmrebating of 30 mmstandard-type or special profile tips

22140 basic tool body (without tips)€p.pc.

Part-No.Shankmm

L₂mm

ForD mm

Forsize

22145-0-26105-R1019,426122146-0-26105-R1222145-0-32108-R102632222146-0-32108-R1222145-0-36110-R103036322146-0-36110-R12


PUPart-No.Rmm

Forsize


Rounding over tip272140-6-00002-0 2119,4 x 9 x 1,5272140-6-00003-0 3272140-6-00004-0 4272140-6-00005-0 5272140-6-00006-0 6226 x 12,5 x 1,5272140-6-00008-0 8272140-6-00010-010330 x 14,5 x 1,5

Coving tip272145-6-00005-0 5119,4 x 9 x 1,5272145-6-00006-0 6226 x 12,5 x 1,5272145-6-00008-0 8272145-6-00010-010330 x14,5 x 1,5

Rebating tip272142-6-19500-04-sided119,4 x 9 x 1,5272142-6-26000-04-sided226 x 12,5 x 1,5272142-6-30000-04-sided330 x 14,5 x 1,5

Bevelling tip272148-6-19545-0L₃ = 5119,4 x 9 x 1,5272148-6-26045-0L₃ = 8226 x 12,5 x 1,5272148-6-30045-0L₃ =10330 x 14,5 x 1,5

Special profiles272149-6-26000-Rblank, 2-sided226,5 x 12,5 x 1,5272149-6-30000-Rblank, 2-sided330,5 x 14,5 x 1,5272149-6-26001-Rprofiled on both sides226 x 12,5 x 1,5272149-6-30001-Rprofiled on both sides330 x 14,5 x 1,5



1039081-0-04060-RM 4 x 6, T15, for D= 26 mmTorx clamping screw1039076-0-04000-RM 4 x 5,9, extra-large head, T15, f. D=32/36 mmTorx clamping screw

1039052-0-03500-RM 3,5 x 6,0 mmCovering screw539077-0-04015-1T15, with flagTorx key





mechanical feedUNITEC Universal Profile Cutter72149 standard profiles for No. 22140

€p.pc.

PUPart-No.Forsize


ProfileNo.

272149-6-00001-R330 x 14,5 x 1,5 1272149-6-00002-R330 x 14,5 x 1,5 2272149-6-00003-R330 x 14,5 x 1,5 3272149-6-00004-R330 x 14,5 x 1,5 4272149-6-00005-R330 x 14,5 x 1,5 5272149-6-30011-R330 x 14,5 x 1,511

Examples of Profiles for No. 22451




Universal Profile Cutter for reversible T.C. tip Z122451

€p.pc.

Part-No.Shankmm

L₁mm

Bmax.

Dmm

Right-hand rotationSize 1

22451-0-27002-R12 x 40 69232722451-0-27006-R25 x 60 m. E. M 81152327

Size 222451-0-47006-R25 x 60 m. E. M 81154047


Part-No.Forsize

DesignB x H x Smm

72010-6-02001-01unprofiled20 x 12 x 1,572451-6-10001-R1profiled72451-6-20000-R2unprofiled36 x 21 x 272451-6-20001-R2profiled


Technical details:Designed to take one reversible T.C. tip, profiled on both sides, with shear angle. Can be resharpenedseveral times (depending on profile depth). For mechanical feed.

Application:For cutting decorative grooves, rosettes, etc. on stationary routers and CNC routers.Profile width and profile depth according to illustrations below (full size).

Alternatives:Decorative Groove cutters Nos. 22195 (page 6.3) and 22196 (page 6.4). Bottom cutting profilecutters Nos. 22543 (page 6.14) and 22545 (page 6.15) as well as No. 22470 (page 6.45).

For examples of profiles see page 6.10.


1039081-0-04060-RM 4 x 6,T15, (for size 1)Torx clamping screw1039076-0-04000-RM 4 x 5,9, extra-large head, T15, (for size 2)Torx clamping screw

539077-0-04015-1T15, with flagTorx key139077-0-04015-2T15, with handleTorx key





mechanical feedUNITEC Universal Profile Cutter72149 standard profiles for No. 22140

€p.pc.

PUPart-No.Forsize


ProfileNo.

272149-6-00001-R330 x 14,5 x 1,5 1272149-6-00002-R330 x 14,5 x 1,5 2272149-6-00003-R330 x 14,5 x 1,5 3272149-6-00004-R330 x 14,5 x 1,5 4272149-6-00005-R330 x 14,5 x 1,5 5272149-6-30011-R330 x 14,5 x 1,511

Examples of Profiles for No. 22451




Universal Profile Cutter for reversible T.C. tip Z122451

€p.pc.

Part-No.Shankmm

L₁mm

Bmax.

Dmm

Size 122451-0-27002-R12 x 40 69232722451-0-27006-R25 x 60 m. E. M 81152327

Size 222451-0-47006-R25 x 60 m. E. M 81154047


Part-No.Forsize

DesignB x H x Smm

72010-6-02001-01unprofiled20 x 12 x 1,572451-6-10001-R1profiled72451-6-20000-R2unprofiled36 x 21 x 272451-6-20001-R2profiled


Technical details:Designed to take one reversible T.C. tip, profiled on both sides, with shear angle. Can be resharpenedseveral times (depending on profile depth). For mechanical feed.

Application:For cutting decorative grooves, rosettes, etc. on stationary routers and CNC routers.Profile width and profile depth according to illustrations below (full size).

Alternatives:Decorative Groove cutters Nos. 22195 (page 6.3) and 22196 (page 6.4). Bottom cutting profilecutters Nos. 22543 (page 6.14) and 22545 (page 6.15) as well as No. 22470 (page 6.45).

For examples of profiles see page 6.10.


1039081-0-04060-RM 4 x 6,T15, (for size 1)Torx clamping screw1039076-0-04000-RM 4 x 5,9, extra-large head, T15, (for size 2)Torx clamping screw

539077-0-04015-1T15, with flagTorx key139077-0-04015-2T15, with handleTorx key





Ø87 Ø105Ø37 Ø37

Ø105Ø40Ø90

6.12

Cutter w. interchangeable T.C. knives for free profiling OverviewKnife clamping without wedges, directly on the tool bodyInternal profiling (bottom cutting)

External profiling

17

30

10

31.517

1934

1953 45 - 90

31-40

25 -

100

24

25 38

5136

8060

77

23

40

Z = 1 for reduced feed rate

Z = 2 for improved surface finish and higher feed rates

No. 22195(Page 6.3)

No. 22534 (Page 6.20)back screw fixing

No. 22530-90(Page 6.23)

No. 22538(Page 6.25)

No. 22530(Page 6.27)

No. 22542(Page 6.27)

No. 22529 (Page 6.19)front screw fixing



No. 22530 (Page 6.21)front screw fixing

No. 22196(Page 6.4)

No. 22543(Page 6.14)

No. 22545(Page 6.15)

No. 22547(Page 6.17)

No. 22546(Page 6.16)

No. 22451 Size 1(Page 6.11)

No. 22451 Size 2(Page 6.11)

k06-12_en.indd 12 11.04.13 10:02

6.13

Cutter w. interchangeable T.C. knives for free profiling OverviewKnife clamping without wedges, directly on the tool bodyExternal profiling (continuation)

No. 22440 (Page 6.28) No. 22442 (Page 6.29)

160

144

Raised panel cutters w. T.C. knives see “door production” Pages 7.13 – 7.16.

Selection criteriaWhich body, which knife for which profile?

External profilinga) Small diameter Fmin can be 31 mm or more:

Tool body No. 22530 (Page 6.21):

Select the cutting length (knife width) L2. The adjoining „knife numbers“ refer to the foils of the interchangeable knives on pages 6.35 – 6.40.If several „knife numbers“ are specified for a cutting length L2, a knife can be selected (for the same body) for which the „area for profiling“ corresponds to the profile to be milled.This is carried out by placing the wood sample on the foil or by placing the sketch/drawing (1:1) underneath. Depending on the knife selected, different cutting circle diameters may result, specified in the table of the body under Fmax.

If the profile depth (area that can be profiled) of the given knife numbers is not sufficient:

Bodies No. 22538 / 22530-97 / 22542 / 22440 / 22442:

Same test with the given „knife numbers“.

Should none of the knives be suitable here either, a special body is required, in extreme cases also with special knives.

b) Small diameter Fmin must be less than 31 mm:

Body No. 22534 (Fmin = 10 mm) – No. 22529 (Fmin = 17 mm) – No. 22532 (Fmin = 19 mm)

Procedure as described in a).

Internal profilingFor profiles up to approx. 20 to 24 mm width, covered by No. 22195 (Page 6.3) or 22196 (Page 6.4), these routers should be used, i.e. Z = 1.

From a width of approx. 20 mm, it is preferable to select Z = 2 (No. 22543 page 6.14, No. 22545 page 6.15, No. 22547 page 6.17).

Advantages: Better balancing, better surface finish, higher feed rates possible.

Further procedure:

Select the appropriate knives and the corresponding body based on the foils (page 6.35 to 6.40).Determine the T.C. grade according to the knife tables on the pages for the body.

Please observe the quantity scale and template costs.

Basic order information1 x Cutter body, e.g. No. 22530-0-55406-R (Profiled body, L2 = 40 mm, shank 25 mm)2 x Profile knives, e.g. No. 72531-6-40251-R (Profile knife No. 5 = 40 x 25 x 2 mm, HW04*)

*The knife table on page 6.33 for most of the knives shows two different T.C. grades: HW04 (especially for solid wood) orHW02 (standard grade).

Please keep in mind that from a quantity of 10 knives (of the same profile) no template costs will be charged.With repeat orders there is generally no charge for template costs.

We will be happy to help choose the tools for you.Please send us your wood sample or a dimensioned sketch or drawing.

k06-13_en.indd 13 11.04.13 10:02

RAPIDO Bottom Cutting Profiler for T.C. knives Z2

Technical details:Tool body for two interchangeable T.C. knives,profiled on one side, with shear angle. Formechanical feed. Right-hand rotation. Theinterchangeable T.C. knives, available in twodifferent T.C. grades can be profiled accordingto adjacent illustrations.

Application:For cutting profile grooves, rosettes, decorativeprofiles in furniture and door production onstationary routers and CNC machines.

R.P.M. max. = 18 000

22543 without interchangeable T.C. knives€p.pc.

Part-No.Shankmm

L₁mm

Fmin

mmL₂mm

Dmm

Fmax

mm

Reprofiled body22543-0-38003-R12 x 40702520,5363822543-0-38009-R12,7 (½") x 40702520,53638

Preprofiled body 1)

22543-0-36003-R12 x 4070-20,5363822543-0-36009-R12,7 (½") x 4070-20,53638


PUPart-No.DesignDimensionsB x H x S mm

HW 04 (for solid wood)272543-6-22040-Runprofiled22 x 19 x 2272543-6-22041-Rprofiled22 x 19 x 2

HW 01 (for MDF)272543-6-22010-Runprofiled22 x 19 x 2272543-6-22011-Rprofiled22 x 19 x 2


1) Preprofiled = cutter body as per broken lines on illustration is available ex stock,and reprofiling is not necessary.







Technical details:Tool body for two profiled, interchangeable T.C.knives, with shear angle. For mechanical feed.Right-hand rotation.If required, the basic tool body can be reducedto Fmin= 41 mm for extra costs. Theinterchangeable T.C. knives, available in twodifferent T.C. grades, can be profiled accordingto adjacent illustrations.


R.P.M. max. = 12 000


Part-No.Shankmm

L₁mm

Fmin

mmL₂mm

Dmm

Fmax

mm

22545-0-00304-R¾"x 55 m. E. M 81054138,5485122545-0-00305-R20 x 55 m. E. M 822545-0-00306-R25 x 55 m. E. M 8



HW 04 (for solid wood)272545-6-40100-Runprofiled40 x 25,5 x 2272545-6-40101-Rprofiled

HW 01 (for MDF)272545-6-40200-Runprofiled40 x 25,5 x 2272545-6-40201-Rprofiled









Technical details:Tool body for two interchangeable T.C. knives,profiled on one side, with shear angle. Formechanical feed. Right-hand rotation. Theinterchangeable T.C. knives, available in twodifferent T.C. grades can be profiled accordingto adjacent illustrations.


R.P.M. max. = 18 000


Part-No.Shankmm

L₁mm

Fmin

mmL₂mm

Dmm

Fmax

mm

Reprofiled body22543-0-38003-R12 x 40702520,5363822543-0-38009-R12,7 (½") x 40702520,53638

Preprofiled body 1)

22543-0-36003-R12 x 4070-20,5363822543-0-36009-R12,7 (½") x 4070-20,53638



HW 04 (for solid wood)272543-6-22040-Runprofiled22 x 19 x 2272543-6-22041-Rprofiled22 x 19 x 2

HW 01 (for MDF)272543-6-22010-Runprofiled22 x 19 x 2272543-6-22011-Rprofiled22 x 19 x 2


1) Preprofiled = cutter body as per broken lines on illustration is available ex stock,and reprofiling is not necessary.







Technical details:Tool body for two profiled, interchangeable T.C.knives, with shear angle. For mechanical feed.Right-hand rotation. If required, the basic tool body can be reducedto Fmin= 41 mm for extra costs. Theinterchangeable T.C. knives, available in twodifferent T.C. grades, can be profiled accordingto adjacent illustrations.

Application:For cutting profile grooves, rosettes, decorativeprofiles in furniture and door production onstationary routers and CNC machines. R.P.M. max. = 12 000


Part-No.Shank mm

L₁ mm

Fmin mm

L₂ mm

D mm

Fmax mm

22545-0-00304-R¾"x 55 m. E. M 81054138,54851 22545-0-00305-R20 x 55 m. E. M 8 22545-0-00306-R25 x 55 m. E. M 8


PUPart-No.DesignDimensions B x H x S mm

HW 04 (for solid wood)

272545-6-40100-Runprofiled40 x 25,5 x 2 272545-6-40101-Rprofiled

HW 01 (for MDF)

272545-6-40200-Runprofiled40 x 25,5 x 2 272545-6-40201-Rprofiled

Quantity discounts, ordering same profile: 5 - 9 pcs. = 12%, up from 10 pcs. = 25 %. Template costs: up to 9 pcs. only. Repeat orders of same profile: no template costs.


1039076-0-04000-RM 4 x 5,9, T15Torx clamping screw 139077-0-04015-2T15, with handleTorx key



6.15


for double profilesRAPIDO Bottom Cutting Profiler Z2

Technical details:Tool body for two profiled, interchangeable T.C.knives, with shear angle. For mechanical feed.Right-hand rotation. The interchangeable knivescan be profiled according to adjacentillustrations.

The profile of tool body will be adapted ineach case to the appropriate profile of knife.The interchangeable knives have to be orderedin addition.

Application:Cutting interior as well as exterior profiles, e.g.on furniture doors through mooving Z-axis.Choose appropiate T.C. grade, for solid wood(HW 04) or for wood composites (HW 02).

R.P.M. max. = 12 000


Part-No.Shankmm

L₁mm

f. knivesNo.

L₂mm

Dmm

Fmax

mm

Profiled body22546-0-77004-R¾" x 55 m. E. M 81154743747722546-0-77005-R20 x 55 m. E. M 822546-0-77006-R25 x 55 m. E. M 8

Unprofiled body22546-0-74004-R¾" x 55 m. E. M 81134743747722546-0-74005-R20 x 55 m. E. M 822546-0-74006-R25 x 55 m. E. M 8



HW 02 (standard grade)272530-6-50300-Runprofiled50 x 30 x 2272546-6-50301-Rprofiled

HW 04 (for solid wood)272531-6-50300-Runprofiled50 x 30 x 2272546-6-50041-Rprofiled








Technical details:Tool body for two profiled interchangeable T.C.knives, with shear angle. For mechanical feed.Right-hand rotation. The interchangeable knivescan be profiled according to illustrations below.


Application:For cutting wide profile grooves, rosettes infurniture and door production, as well as forcutting flat, deep profiles, such as panel raisingoperations on CNC machines.

R.P.M. max. = 18 000 (Fmax = 60 mm)R.P.M. max. = 12 000 (Fmax = 80 mm)


Part-No.Shankmm

L₁mm

Pmm

Bmm

Dmm

Fmax

mm

Profiled body22547-0-60005-R20 x 55 m. E. M 81001630706022547-0-60006-R25 x 55 m. E. M 822547-0-80005-R20 x 55 m. E. M 81051640908022547-0-80006-R25 x 55 m. E. M 8

Unprofiled body22547-0-70005-R20 x 55 m. E. M 898-30706022547-0-70006-R25 x 55 m. E. M 822547-0-90005-R20 x 55 m. E. M 8103-40908022547-0-90006-R25 x 55 m. E. M 8



HW 02 (standard grade)272530-6-30300-Runprofiled30 x 30 x 2272547-6-30301-Rprofiled272530-6-40300-Runprofiled40 x 30 x 2272547-6-40301-Rprofiled

HW 04 (for solid wood)272531-6-30300-Runprofiled30 x 30 x 2272547-6-30041-Rprofiled272531-6-40300-Runprofiled40 x 30 x 2272547-6-40041-Rprofiled








for double profilesRAPIDO Bottom Cutting Profiler Z2

Technical details:Tool body for two profiled, interchangeable T.C.knives, with shear angle. For mechanical feed.Right-hand rotation. The interchangeable knivescan be profiled according to adjacentillustrations.


Application:Cutting interior as well as exterior profiles, e.g.on furniture doors through mooving Z-axis.Choose appropiate T.C. grade, for solid wood(HW 04) or for wood composites (HW 02).

R.P.M. max. = 12 000


Part-No.Shankmm

L₁mm

f. knivesNo.

L₂mm

Dmm

Fmax

mm






HW 04 (for solid wood)272531-6-50300-Runprofiled50 x 30 x 2272546-6-50041-Rprofiled








Technical details:Tool body for two profiled interchangeable T.C.knives, with shear angle. For mechanical feed.Right-hand rotation. The interchangeable knivescan be profiled according to illustrations below. The profile of tool body will be adapted ineach case to the appropriate profile of knife.The interchangeable knives have to be orderedin addition.

Application:For cutting wide profile grooves, rosettes infurniture and door production, as well as forcutting flat, deep profiles, such as panel raisingoperations on CNC machines. R.P.M. max. = 18 000 (Fmax = 60 mm) R.P.M. max. = 12 000 (Fmax = 80 mm)


Part-No.Shank mm

L₁ mm

P mm

B mm

D mm

Fmax mm

Profiled body

22547-0-60005-R20 x 55 m. E. M 810016307060 22547-0-60006-R25 x 55 m. E. M 8 22547-0-80005-R20 x 55 m. E. M 810516409080 22547-0-80006-R25 x 55 m. E. M 8

Unprofiled body

22547-0-70005-R20 x 55 m. E. M 898-307060 22547-0-70006-R25 x 55 m. E. M 8 22547-0-90005-R20 x 55 m. E. M 8103-409080 22547-0-90006-R25 x 55 m. E. M 8


PUPart-No.DesignDimensions B x H x S mm

HW 02 (standard grade)

272530-6-30300-Runprofiled30 x 30 x 2 272547-6-30301-Rprofiled 272530-6-40300-Runprofiled40 x 30 x 2 272547-6-40301-Rprofiled

HW 04 (for solid wood)

272531-6-30300-Runprofiled30 x 30 x 2 272547-6-30041-Rprofiled 272531-6-40300-Runprofiled40 x 30 x 2 272547-6-40041-Rprofiled

Quantity discounts, ordering same profile: 5 - 9 pcs. = 12%, up from 10 pcs. = 25 %. Template costs: up to 9 pcs. only. Repeat orders of same profile: no template costs.


1039076-0-04000-RM 4 x 5,9, T15Torx clamping screw 139077-0-04015-2T15, with handleTorx key



6.17


Example for 4-phase machining




RAPIDO Profile Cutter for T.C. knives Z2

Technical details:Tool body for two profiled interchangeable T.C.knives. Ramp plunge cutting operations alsopossible. For mechanical feed. Right-handrotation. The interchangeable T.C. knives canbe profiled according to opposite illustrations.


Application:To produce decorative edge profiles in furnitureand door production, especially for narrow radii,on stationary routers or CNC machines.

R.P.M. max. = 18 000


Part-No.Shankmm

L₁mm

f. knivesNo.

L₂mm

Fmin

mmFmax

mm

Profiled body22529-0-00002-R12 x 408024321731,522529-0-00009-R½" x 40

Unprofiled body22529-0-31502-R12 x 407824321731,522529-0-31509-R½" x 40



HW 02 (standard grade)272529-6-32150-Runprofiled32 x 15 x 1,5272529-6-32151-Rprofiled



1039081-0-03040-RM 3 x 4, T 9Torx clamping screw139077-0-03009-2T 9, with handleTorx key





Example for 4-phase machining





Technical details:Tool body for two profiled interchangeable T.C.knives. Ramp plunge cutting operations alsopossible. For mechanical feed. Right-handrotation. The interchangeable T.C. knives canbe profiled according to opposite illustrations.


Application:To produce decorative edge profiles in furnitureand door production, especially for narrow radii,on stationary routers or CNC machines.

R.P.M. max. = 18 000


Part-No.Shankmm

L₁mm

f. knivesNo.

L₂mm

Fmin

mmFmax

mm

Profiled body22529-0-00002-R12 x 408024321731,522529-0-00009-R½" x 40

Unprofiled body22529-0-31502-R12 x 407824321731,522529-0-31509-R½" x 40



HW 02 (standard grade)272529-6-32150-Runprofiled32 x 15 x 1,5272529-6-32151-Rprofiled



1039081-0-03040-RM 3 x 4, T 9Torx clamping screw139077-0-03009-2T 9, with handleTorx key





back screw fixingRAPIDO Profile Cutters for T.C. knives Z222532 without interchangeable T.C. knives

€p.pc.

Part-No.Shankmm

L₁mm

f. knivesNo.

L₂mm

Dmm

Fmax

mm

Profiled body22532-0-34309-R½" x 4081130313422532-0-34306-R25 x 55 m. E. M 89622532-0-44402-R12 x 40911840505322532-0-44409-R½" x 409122532-0-44404-R¾"x 55 m. E. M 810622532-0-44406-R25 x 55 m. E. M 8106

Unprofiled body22532-0-31306-R25 x 55 m. E. M 894130313422532-0-41404-R¾"x 55 m. E. M 81041840505322532-0-41406-R25 x 55 m. E. M 8104


Part-No.Shankmm

L₁mm

f. knivesNo.

L₂mm

Dmm

Fmax

mm

Reprofiled body22534-0-30252-R12 x 40711025283022534-0-30259-R½" x 407122534-0-30254-R¾" x 55 m. E. M 88622534-0-30256-R25 x 55 m. E. M 886

Preprofiled body 1)

22534-0-28002-R12 x 40711025283022534-0-28009-R½" x 407122534-0-28004-R¾" x 55 m. E. M 88622534-0-28006-R25 x 55 m. E. M 886

1) Preprofiled = cutter body as per broken lineson below illustration is available ex stock,reprofiling not necessary.

Technical details:Tool body for two profiled interchangeable T.C.knives. Also designed to be face ground.Right-hand rotation. For mechanical feed.

The profile of tool body will be adapted ineach case to the appropriate profile of knife.

Application:For cutting decorative profiles in furniture anddoor production, as well as for ceiling and wallpanelling, etc. on stationary routers and CNCmachines.Can also be used for ramp plunge cutting.

R.P.M. max. = 18 000 (Fmax = 30/34 mm)R.P.M. max. = 12 000 (Fmax = 53 mm)



Please order the interchangeable knives in addition (page 6.34).Maximum profile width and profile depth according to illustrations on page 6.35 - 6.39 (full size).Part Nos. on page 6.34.





For Fmin < 31 mm please use body No.22532/22534 page 6.20 (back screw fixing) orNo. 22529 page 6.19.


Part-No.Shankmm

L₁mm

f. knivesNo.

L₂mm

Dmm

Fmax

mm

Profiled body22530-0-55254-R¾"x 55 m. E. M 8 9022/23/25 25-45/55/65*22530-0-55255-R20 x 55 m. E. M 822530-0-55256-R25 x 55 m. E. M 822530-0-55304-R¾"x 55 m. E. M 8 951/2/3 30-45/55/65*22530-0-55305-R20 x 55 m. E. M 822530-0-55306-R25 x 55 m. E. M 822530-0-55404-R¾"x 55 m. E. M 81054/5/6 40-45/55/65*22530-0-55405-R20 x 55 m. E. M 822530-0-55406-R25 x 55 m. E. M 822530-0-55504-R¾"x 55 m. E. M 81157/8/9 50-45/55/65*22530-0-55505-R20 x 55 m. E. M 822530-0-55506-R25 x 55 m. E. M 822530-0-71604-R¾"x 55 m. E. M 813027 60667122530-0-71605-R20 x 55 m. E. M 822530-0-71606-R25 x 55 m. E. M 822530-0-71704-R¾" x 55 m. E. M 814019 70667122530-0-71705-R20 x 55 m. E. M 822530-0-71706-R25 x 55 m. E. M 822530-0-73104-R¾" x 55 m. E. M 817028100687322530-0-73105-R20 x 55 m. E. M 822530-0-73106-R25 x 55 m. E. M 8

Unprofiled body22530-0-52256-R25 x 55 m. E. M 8 8822/23/25 256245/55/65*22530-0-52306-R25 x 55 m. E. M 8 931/2/3 306245/55/65*22530-0-52406-R25 x 55 m. E. M 81034/5/6 406245/55/65*22530-0-52506-R25 x 55 m. E. M 81137/8/9 506245/55/65*22530-0-66606-R25 x 55 m. E. M 812827 60667122530-0-66706-R25 x 55 m. E. M 813819 70667122530-0-68106-R25 x 55 m. E. M 8168281006873

* The tool body can be profiled for knives of H = 20, 25 or 30 mm (No. 1/2/3) resulting in a Fmax 45,55 or 65 mm respectively.

Technical details:Tool body for two profiled interchangeable T.C. knives. Also designed to be face ground. Right-handrotation. For mechanical feed.

Maximum profile width and depth according to illustrations on pages 6.35 - 6.39 (full size).The profile of tool body will be adapted in each case to the appropriate profile of knife.The interchangeable knives have to be ordered in addition (see page 6.34).

Application:For cutting decorative profiles in furniture and door production, as well as for ceiling or wall panelling,etc. on stationary routers or CNC machines.







back screw fixingRAPIDO Profile Cutters for T.C. knives Z222532 without interchangeable T.C. knives

€p.pc.

Part-No.Shankmm

L₁mm

f. knivesNo.

L₂mm

Dmm

Fmax

mm

Profiled body22532-0-34309-R½" x 4081130313422532-0-34306-R25 x 55 m. E. M 89622532-0-44402-R12 x 40911840505322532-0-44409-R½" x 409122532-0-44404-R¾"x 55 m. E. M 810622532-0-44406-R25 x 55 m. E. M 8106

Unprofiled body22532-0-31306-R25 x 55 m. E. M 894130313422532-0-41404-R¾"x 55 m. E. M 81041840505322532-0-41406-R25 x 55 m. E. M 8104


Part-No.Shankmm

L₁mm

f. knivesNo.

L₂mm

Dmm

Fmax

mm

Reprofiled body22534-0-30252-R12 x 40711025283022534-0-30259-R½" x 407122534-0-30254-R¾" x 55 m. E. M 88622534-0-30256-R25 x 55 m. E. M 886

Preprofiled body 1)

22534-0-28002-R12 x 40711025283022534-0-28009-R½" x 407122534-0-28004-R¾" x 55 m. E. M 88622534-0-28006-R25 x 55 m. E. M 886

1) Preprofiled = cutter body as per broken lineson below illustration is available ex stock,reprofiling not necessary.

Technical details:Tool body for two profiled interchangeable T.C.knives. Also designed to be face ground.Right-hand rotation. For mechanical feed.

The profile of tool body will be adapted ineach case to the appropriate profile of knife.

Application:For cutting decorative profiles in furniture anddoor production, as well as for ceiling and wallpanelling, etc. on stationary routers and CNCmachines.Can also be used for ramp plunge cutting.

R.P.M. max. = 18 000 (Fmax = 30/34 mm)R.P.M. max. = 12 000 (Fmax = 53 mm)



Please order the interchangeable knives in addition (page 6.34).Maximum profile width and profile depth according to illustrations on page 6.35 - 6.39 (full size).Part Nos. on page 6.34.





For Fmin < 31 mm please use body No.22532/22534 page 6.20 (back screw fixing) orNo. 22529 page 6.19.


Part-No.Shankmm

L₁mm

f. knivesNo.

L₂mm

Dmm

Fmax

mm

Profiled body22530-0-55254-R¾"x 55 m. E. M 8 9022/23/25 25-45/55/65*22530-0-55255-R20 x 55 m. E. M 822530-0-55256-R25 x 55 m. E. M 822530-0-55304-R¾"x 55 m. E. M 8 951/2/3 30-45/55/65*22530-0-55305-R20 x 55 m. E. M 822530-0-55306-R25 x 55 m. E. M 822530-0-55404-R¾"x 55 m. E. M 81054/5/6 40-45/55/65*22530-0-55405-R20 x 55 m. E. M 822530-0-55406-R25 x 55 m. E. M 822530-0-55504-R¾"x 55 m. E. M 81157/8/9 50-45/55/65*22530-0-55505-R20 x 55 m. E. M 822530-0-55506-R25 x 55 m. E. M 822530-0-71604-R¾"x 55 m. E. M 813027 60667122530-0-71605-R20 x 55 m. E. M 822530-0-71606-R25 x 55 m. E. M 822530-0-71704-R¾" x 55 m. E. M 814019 70667122530-0-71705-R20 x 55 m. E. M 822530-0-71706-R25 x 55 m. E. M 822530-0-73104-R¾" x 55 m. E. M 817028100687322530-0-73105-R20 x 55 m. E. M 822530-0-73106-R25 x 55 m. E. M 8

Unprofiled body22530-0-52256-R25 x 55 m. E. M 8 8822/23/25 256245/55/65*22530-0-52306-R25 x 55 m. E. M 8 931/2/3 306245/55/65*22530-0-52406-R25 x 55 m. E. M 81034/5/6 406245/55/65*22530-0-52506-R25 x 55 m. E. M 81137/8/9 506245/55/65*22530-0-66606-R25 x 55 m. E. M 812827 60667122530-0-66706-R25 x 55 m. E. M 813819 70667122530-0-68106-R25 x 55 m. E. M 8168281006873

* The tool body can be profiled for knives of H = 20, 25 or 30 mm (No. 1/2/3) resulting in a Fmax 45,55 or 65 mm respectively.

Technical details:Tool body for two profiled interchangeable T.C. knives. Also designed to be face ground. Right-handrotation. For mechanical feed.

Maximum profile width and depth according to illustrations on pages 6.35 - 6.39 (full size).The profile of tool body will be adapted in each case to the appropriate profile of knife.The interchangeable knives have to be ordered in addition (see page 6.34).

Application:For cutting decorative profiles in furniture and door production, as well as for ceiling or wall panelling,etc. on stationary routers or CNC machines.







RAPIDO Profile Cutter for T.C. knives22530 examples of profiles (1:1)





Technical details:Tool body for two profiled interchangeable T.C.knives, with synthetic fit.For mechanical feed. Right-hand rotation. Theinterchangeable T.C. knives can be profiledaccording to illustrations.

The profile of tool body will be adapted ineach case to the appropriate profile of theknife. The interchangeable knives have to beordered in addition (see page 6.34).

Application:For cutting deep, closed profiles, on both sidese.g. bull nose profiles up to R = 25 mm.

R.P.M. max. = 12 000

22530-90 without interchangeable T.C. knives€p.pc.

Part-No.Shankmm

L₁mm

f. knivesNo.

L₂mm

Fmin

mmFmax

mm













RAPIDO Profile Cutter for T.C. knives22530 examples of profiles (1:1)





Technical details:Tool body for two profiled interchangeable T.C.knives, with synthetic fit.For mechanical feed. Right-hand rotation. Theinterchangeable T.C. knives can be profiledaccording to illustrations.

The profile of tool body will be adapted ineach case to the appropriate profile of theknife. The interchangeable knives have to beordered in addition (see page 6.34).

Application:For cutting deep, closed profiles, on both sidese.g. bull nose profiles up to R = 25 mm.

R.P.M. max. = 12 000


Part-No.Shankmm

L₁mm

f. knivesNo.

L₂mm

Fmin

mmFmax

mm














Technical details:Tool body for two profiled interchangeable T. C.knives, with shear angle. For mechanical feed.Right-hand rotation.The profile of tool body will be adapted ineach case to the appropriate profile ofknives.The interchangeable knives have to be orderedin addition (see page 6.34).

Application:For cutting decorative profiles in furniture anddoor production, as well as for ceiling and wallpanelling, etc. on stationary routers and CNCmachines.Especially for cutting large rounded over profiles.

R.P.M. max. = 9 000

Area available for profiling, see foils 5b/6b/8b/9bon pages 6.36 and 6.37.


Part-No.Shankmm

L₁mm

f. knivesNo.

L₂mm

Rmm

Fmax

mm

Body profiled for rounding over knives22538-0-00205-R20 x 55 m. E. M 8 98-4015-2010022538-0-00206-R25 x 55 m. E. M 822538-0-00305-R20 x 55 m. E. M 8103-5025-3012022538-0-00306-R25 x 55 m. E. M 8

Body profiled, special profiles22538-0-11005-R20 x 55 m. E. M 81085b/6b40-105/110*22538-0-11006-R25 x 55 m. E. M 822538-0-13005-R20 x 55 m. E. M 81108b/9b50-125/130*22538-0-13006-R25 x 55 m. E. M 8

Unprofiled body22538-0-10505-R20 x 55 m. E. M 81065b/6b40-105/110*22538-0-10506-R25 x 55 m. E. M 822538-0-12505-R20 x 55 m. E. M 81088b/9b50-125/130*22538-0-12506-R25 x 55 m. E. M 8


Part-No.DesignDimensionsB x H x S mm

Standard rounding over knives, HW 0272538-6-00015-RR 15 mm40 x 25 x 272538-6-00020-RR 20 mm72538-6-00025-RR 25 mm50 x 25 x 272538-6-00030-RR 30 mm

Special profiles, HW 0272530-6-40251-Rprofiled40 x 25 x 272530-6-40301-Rprofiled40 x 30 x 272530-6-50251-Rprofiled50 x 25 x 272530-6-50301-Rprofiled50 x 30 x 2

Blank knives, HW 0272530-6-40250-Runprofiled40 x 25 x 272530-6-40300-Runprofiled40 x 30 x 272530-6-50250-Runprofiled50 x 25 x 272530-6-50300-Runprofiled50 x 30 x 2

Quantity discounts, ordering same profile: 5 - 9 pcs = 12 %, up from 10 pcs. = 25 %.Template costs: up to 9 pcs. only. Repeat orders for same profile: no template costs.

* Knives with H = 25 mm or 30 mm can be used, for special profiles which means for B = 40 mmFmax. 105 or 110 mm and B = 50 mm Fmax. 125 or 130 mm.







Technical details:Tool body for two profiled interchangeable T.C.knives. Shear angle design. Also designed to beface ground.Right-hand rotation. For mechanical feed.

The profile of tool body will be adapted ineach case to the appropriate profile of knife.The interchangeable knives have to be orderedin addition (see page 6.34).

Application:For cutting decorative profiles in furniture anddoor production, as well as for ceiling and wallpanelling, etc. on stationary routers and CNCmachines. Especially when cutting large deepprofiles.

R.P.M. max. = 12 000


Part-No.Shankmm

L₁mm

f. knivesNo.

L₂mm

Dmm

Fmax

mm

Profiled body22538-0-74404-R¾" x 55 m. E. M 81045a/6a40-82/87*22538-0-74406-R25 x 55 m. E. M 8

Unprofiled body22538-0-70404-R¾" x 55 m. E. M 81025a/6a408382/87*22538-0-70406-R25 x 55 m. E. M 8



Standard profile knives, HW 0272538-6-00001-Rprofile No. 140 x 30 x 272538-6-00002-Rprofile No. 2

Special profiles, HW 0272530-6-40250-Runprofiled40 x 25 x 272530-6-40251-Rprofiled72530-6-40300-Runprofiled40 x 30 x 272530-6-40301-Rprofiled


*For tool body of D = 83 mm either knives of H = 25 or 30 mm can be used result in Fmax of82 or 87 mm, respectively.










R.P.M. max. = 9 000

Area available for profiling, see foils 5b/6b/8b/9bon pages 6.36 and 6.37.


Part-No.Shankmm

L₁mm

f. knivesNo.

L₂mm

Rmm

Fmax

mm

Body profiled for rounding over knives22538-0-00205-R20 x 55 m. E. M 8 98-4015-2010022538-0-00206-R25 x 55 m. E. M 822538-0-00305-R20 x 55 m. E. M 8103-5025-3012022538-0-00306-R25 x 55 m. E. M 8

Body profiled, special profiles22538-0-11005-R20 x 55 m. E. M 81085b/6b40-105/110*22538-0-11006-R25 x 55 m. E. M 822538-0-13005-R20 x 55 m. E. M 81108b/9b50-125/130*22538-0-13006-R25 x 55 m. E. M 8

Unprofiled body22538-0-10505-R20 x 55 m. E. M 81065b/6b40-105/110*22538-0-10506-R25 x 55 m. E. M 822538-0-12505-R20 x 55 m. E. M 81088b/9b50-125/130*22538-0-12506-R25 x 55 m. E. M 8



Standard rounding over knives, HW 0272538-6-00015-RR 15 mm40 x 25 x 272538-6-00020-RR 20 mm72538-6-00025-RR 25 mm50 x 25 x 272538-6-00030-RR 30 mm

Special profiles, HW 0272530-6-40251-Rprofiled40 x 25 x 272530-6-40301-Rprofiled40 x 30 x 272530-6-50251-Rprofiled50 x 25 x 272530-6-50301-Rprofiled50 x 30 x 2

Blank knives, HW 0272530-6-40250-Runprofiled40 x 25 x 272530-6-40300-Runprofiled40 x 30 x 272530-6-50250-Runprofiled50 x 25 x 272530-6-50300-Runprofiled50 x 30 x 2


* Knives with H = 25 mm or 30 mm can be used, for special profiles which means for B = 40 mmFmax. 105 or 110 mm and B = 50 mm Fmax. 125 or 130 mm.







Technical details:Tool body for two profiled interchangeable T.C.knives. Shear angle design. Also designed to beface ground.Right-hand rotation. For mechanical feed.


Application:For cutting decorative profiles in furniture anddoor production, as well as for ceiling and wallpanelling, etc. on stationary routers and CNCmachines. Especially when cutting large deepprofiles.

R.P.M. max. = 12 000


Part-No.Shankmm

L₁mm

f. knivesNo.

L₂mm

Dmm

Fmax

mm

Profiled body22538-0-74404-R¾" x 55 m. E. M 81045a/6a40-82/87*22538-0-74406-R25 x 55 m. E. M 8

Unprofiled body22538-0-70404-R¾" x 55 m. E. M 81025a/6a408382/87*22538-0-70406-R25 x 55 m. E. M 8



Standard profile knives, HW 0272538-6-00001-Rprofile No. 140 x 30 x 272538-6-00002-Rprofile No. 2

Special profiles, HW 0272530-6-40250-Runprofiled40 x 25 x 272530-6-40251-Rprofiled72530-6-40300-Runprofiled40 x 30 x 272530-6-40301-Rprofiled


*For tool body of D = 83 mm either knives of H = 25 or 30 mm can be used result in Fmax of82 or 87 mm, respectively.










R.P.M. max. = 9 000


Part-No.Shankmm

L₁mm

f. knivesNo.

L₂mm

Dmm

Fmax

mm

Body profiled for profiles 1-822537-0-00305-R20 x 55 m. E. M 893-30767822537-0-00306-R25 x 55 m. E. M 8

Body profiled, special profiles22537-0-80305-R20 x 55 m. E. M 8953330788022537-0-80306-R25 x 55 m. E. M 8

Unprofiled body22537-0-78305-R20 x 55 m. E. M 8933330788122537-0-78306-R25 x 55 m. E. M 8



Standard profile knives, HW 0272537-6-00001-Rprofile No. 130 x 25 x 272537-6-00002-Rprofile No. 272537-6-00003-Rprofile No. 372537-6-00004-Rprofile No. 472537-6-00005-Rprofile No. 572537-6-00006-Rprofile No. 672537-6-00007-Rprofile No. 772537-6-00008-Rprofile No. 8

Special profiles, HW 0272530-6-30250-Runprofiled30 x 25 x 272537-6-30251-Rprofiled







RAPIDO Profile Cutters for T.C. knives Z2

Technical details:Tool body for two profiled interchangeable T.C.knives, with shear angle. For mechanical feed.Right-hand rotation.


Application:Especially for cutting deep, large decorativeprofiles in furniture and door production, as wellas for ceiling or wall panelling, etc. on stationaryrouters and CNC machines.

R.P.M. max. = 8 000


Part-No.Shankmm

L₁mm

f. knivesNo.

L₂mm

Dmm

Fmax

mm




Part-No.Shankmm

L₁mm

f. knivesNo.

L₂mm

Dmm

Fmax

mm

Profiled body22542-0-10004-R¾"x 55 m. E. M 8105213610210522542-0-10005-R20 x 55 m. E. M 822542-0-10006-R25 x 55 m. E. M 8

Unprofiled body22542-0-97404-R¾"x 55 m. E. M 8103213610210522542-0-97405-R20 x 55 m. E. M 822542-0-97406-R25 x 55 m. E. M 8

Maximum profile width and profile depth according to illustrations on pages 6.35 - 6.39.(full size).










R.P.M. max. = 9 000


Part-No.Shankmm

L₁mm

f. knivesNo.

L₂mm

Dmm

Fmax

mm

Body profiled for profiles 1-822537-0-00305-R20 x 55 m. E. M 893-30767822537-0-00306-R25 x 55 m. E. M 8

Body profiled, special profiles22537-0-80305-R20 x 55 m. E. M 8953330788022537-0-80306-R25 x 55 m. E. M 8

Unprofiled body22537-0-78305-R20 x 55 m. E. M 8933330788122537-0-78306-R25 x 55 m. E. M 8



Standard profile knives, HW 0272537-6-00001-Rprofile No. 130 x 25 x 272537-6-00002-Rprofile No. 272537-6-00003-Rprofile No. 372537-6-00004-Rprofile No. 472537-6-00005-Rprofile No. 572537-6-00006-Rprofile No. 672537-6-00007-Rprofile No. 772537-6-00008-Rprofile No. 8

Special profiles, HW 0272530-6-30250-Runprofiled30 x 25 x 272537-6-30251-Rprofiled







RAPIDO Profile Cutters for T.C. knives Z2



Application:Especially for cutting deep, large decorativeprofiles in furniture and door production, as wellas for ceiling or wall panelling, etc. on stationaryrouters and CNC machines.

R.P.M. max. = 8 000


Part-No.Shankmm

L₁mm

f. knivesNo.

L₂mm

Dmm

Fmax

mm




Part-No.Shankmm

L₁mm

f. knivesNo.

L₂mm

Dmm

Fmax

mm

Profiled body22542-0-10004-R¾"x 55 m. E. M 8105213610210522542-0-10005-R20 x 55 m. E. M 822542-0-10006-R25 x 55 m. E. M 8

Unprofiled body22542-0-97404-R¾"x 55 m. E. M 8103213610210522542-0-97405-R20 x 55 m. E. M 822542-0-97406-R25 x 55 m. E. M 8

Maximum profile width and profile depth according to illustrations on pages 6.35 - 6.39.(full size).










Application:For panel raising operations on stationary routersand CNC machines, as well as for cutting flatexterior profiles.

R.P.M. max. = 6 000


Part-No.Shankmm

L₁mm

f. knivesNo.

L₂mm

Dmm

Fmax

mm

Profiled body22440-0-14406-R25* x 55 m. E. M 81072938141144

Unprofiled body22440-0-14106-R25* x 55 m. E. M 81052938141144

* For safety reasons, shank of 25 mm cannot be reduced.










RAPDIO Profile Cutter for T.C. knives Z2+2

Technical details:Tool body made of high-quality, light metal. Fortwo upper and lower, staggered profiledinterchangeable T.C. knives, with shear angle.For mechnical feed. Right-hand rotation.

The profile of the tool body will be adaptedin each case to the appropriate profile ofknife. The interchangeable knives have to beordered in addition (see page 6.34).

Application:Especially for large, deep, closed profile, e.g.table edges. Optimum cutting edge geometry ontop and bottom for perfect surface quality throughstaggered knife position, even across the grain.

R.P.M. max. = 6 000


Part-No.Shankmm

L₁mm

f. knivesNo.

Fmin

mmDmm

Fmax

mm





272530-6-70300-Runprofiled70 x 30 x 2272442-6-70301-Rprofiled272530-6-25250-Runprofiled25 x 25 x 2272442-6-25251-Rprofiled

Quantity discounts, ordering same profile: 5 to 9 pcs = 12 %, up from 10 pcs = 25 %.Template costs: up to 9 pcs only. Repeat orders for same profile: no template costs.


The light metal tool body can be provided with the appropriate steel shank SK30/SK40 orHSK-F 63 for use with automatic tool changers. This will avoid additional tolerances which arisefrom assembling the parallel shank in a clamping chuck. Price on request.










Application:For panel raising operations on stationary routersand CNC machines, as well as for cutting flatexterior profiles.

R.P.M. max. = 6 000


Part-No.Shankmm

L₁mm

f. knivesNo.

L₂mm

Dmm

Fmax

mm













RAPIDO Profile Cutter for T.C. knives Z2+2

Technical details:Tool body made of high-quality, light metal. Fortwo upper and lower, staggered profiledinterchangeable T.C. knives, with shear angle.For mechnical feed. Right-hand rotation.

The profile of the tool body will be adaptedin each case to the appropriate profile ofknife. The interchangeable knives have to beordered in addition (see page 6.34).

Application:Especially for large, deep, closed profile, e.g.table edges. Optimum cutting edge geometry ontop and bottom for perfect surface quality throughstaggered knife position, even across the grain.

R.P.M. max. = 6 000


Part-No.Shankmm

L₁mm

f. knivesNo.

Fmin

mmDmm

Fmax

mm





272530-6-70300-Runprofiled70 x 30 x 2272442-6-70301-Rprofiled272530-6-25250-Runprofiled25 x 25 x 2272442-6-25251-Rprofiled

Quantity discounts, ordering same profile: 5 to 9 pcs = 12 %, up from 10 pcs = 25 %.Template costs: up to 9 pcs only. Repeat orders for same profile: no template costs.


The light metal tool body can be provided with the appropriate steel shank SK30/SK40 orHSK-F 63 for use with automatic tool changers. This will avoid additional tolerances which arisefrom assembling the parallel shank in a clamping chuck. Price on request.







RAPIDO Glue Joint Cutter w. interch. T.C. knives Z222560

€p.pc.

Part-No.Shankmm

L₁mm

L₂mm

Fmm

hmm

ProfileNo.

22560-5-00106-R25 x 55 m. E. M 8106405518-38122560-5-00206-R25 x 55 m. E. M 8 95305515-28222560-5-00306-R25 x 55 m. E. M 8105405525-38322560-5-00406-R25 x 55 m. E. M 8115505528-48422560-5-00506-R25 x 55 m. E. M 8130607135-585

Use tool body No. 22530 (page 6.21) for special profiles.

Technical details:Tool body with 2 profiled interchangeable T.C. knives. Right-hand rotation. For mechanical feed.

Application:To produce glue joints with straight shoulders in soft and hardwood.


272560-6-40001-Rprofile 1, 40 x 25 x 2 mmInterch. T.C. knives272560-6-30002-Rprofile 2, 30 x 25 x 2 mmInterch. T.C. knives


272560-6-60005-Rprofile 5, 60 x 30 x 2 mmInterch. T.C. knives1039076-0-04000-RM 4 x 5,9, T15Torx clamping screw

1039084-0-03012-RM 3 x 12, T8, for eccentric ringTorx clamping screw139077-0-04015-2T15, with handleTorx key




RAPIDO Glue Joint Cutter w. interch. T.C. knives Z264560 adjustable

€p.pc.

Part-No.ShankL₃mm

hmax.

mmL₂mm

Dmm

64560-5-00002-RSK 30458252-8410064560-5-00063-RHSK-F 634564560-5-00006-R25 x 55 m. E. M 8-

Technical details:Two-piece tool body of high-quality, light metal with 2 profiled interchangeable T.C. knives. Adjustablepitch by pitch through spacers which are supplied with the tool. Mounted on a tempered arbor withdouble-threaded end retaining screw. Feather key provides positive drive. Mechanical feed.Right-hand rotation.*

Application:Designed to cut wide glue joints e.g. in the production of arched windows or stairs. The tightnessof the joint can be adjusted depending on the type of wood to be worked. For use on CNC machines.

*To produce the counterprofile without needing to turn the work piece, the cutter set has to be appliedin left-hand rotation. This can be done easily just by turning both cutters on the arbor. Part-No. for"left-hand rotation", e.g. HSK-F 63: 64500-5-00063-L (same price as for R.H.)


164560-5-10001-1100 x 43,5 x 20 mm KN, Z2, topGlue joint cutter164560-5-10001-2100 x 43,5 x 20 mm KN, Z2, bottomGlue joint cutter

272560-6-00001-143,5 x 20 x 2 mm, topInterch. T.C. knife272560-6-00001-242 x 20 x 2 mm, bottomInterch. T.C. knife

139540-0-36420-135 x 6,4 x 20 mm KNSpacer1039076-0-04000-RM 4 x 5,9, T15Torx clamping screw






RAPIDO Glue Joint Cutter w. interch. T.C. knives Z222560

€p.pc.

Part-No.Shankmm

L₁mm

L₂mm

Fmm

hmm

ProfileNo.

22560-5-00106-R25 x 55 m. E. M 8106405518-38122560-5-00206-R25 x 55 m. E. M 8 95305515-28222560-5-00306-R25 x 55 m. E. M 8105405525-38322560-5-00406-R25 x 55 m. E. M 8115505528-48422560-5-00506-R25 x 55 m. E. M 8130607135-585

Use tool body No. 22530 (page 6.21) for special profiles.

Technical details:Tool body with 2 profiled interchangeable T.C. knives. Right-hand rotation. For mechanical feed.

Application:To produce glue joints with straight shoulders in soft and hardwood.




272560-6-60005-Rprofile 5, 60 x 30 x 2 mmInterch. T.C. knives1039076-0-04000-RM 4 x 5,9, T15Torx clamping screw

1039084-0-03012-RM 3 x 12, T8, for eccentric ringTorx clamping screw139077-0-04015-2T15, with handleTorx key




RAPIDO Glue Joint Cutter w. interch. T.C. knives Z264560 adjustable

€p.pc.

Part-No.ShankL₃mm

hmax.

mmL₂mm

Dmm

64560-5-00002-RSK 30458252-8410064560-5-00063-RHSK-F 634564560-5-00006-R25 x 55 m. E. M 8-

Technical details:Two-piece tool body of high-quality, light metal with 2 profiled interchangeable T.C. knives. Adjustablepitch by pitch through spacers which are supplied with the tool. Mounted on a tempered arbor withdouble-threaded end retaining screw. Feather key provides positive drive. Mechanical feed.Right-hand rotation.*

Application:Designed to cut wide glue joints e.g. in the production of arched windows or stairs. The tightnessof the joint can be adjusted depending on the type of wood to be worked. For use on CNC machines.

*To produce the counterprofile without needing to turn the work piece, the cutter set has to be appliedin left-hand rotation. This can be done easily just by turning both cutters on the arbor. Part-No. for"left-hand rotation", e.g. HSK-F 63: 64500-5-00063-L (same price as for R.H.)


164560-5-10001-1100 x 43,5 x 20 mm KN, Z2, topGlue joint cutter164560-5-10001-2100 x 42 x 20 mm KN, Z2, bottomGlue joint cutter

272560-6-00001-143,5 x 20 x 2 mm, topInterch. T.C. knife272560-6-00001-242 x 20 x 2 mm, bottomInterch. T.C. knife

139540-0-36420-135 x 6,4 x 20 mm KNSpacer1039076-0-04000-RM 4 x 5,9, T15Torx clamping screw






with boreRAPIDO Profile Cutter for T.C. knives

Technical details:Tool body of steel or light metal for 2, 3, 4 or 6profiled interchangeable T.C. knives. Design withor without shear angle. Direction of rotationaccording to illustration. For manual ormechanical feed.


Application:For cutting decorative profiles in furniture anddoor production, as well as for ceiling or wallpanelling etc. on stationary routers and CNCmachines (drive unit on top) or on tablemoulders, moulding machines and double endtenoners (drive unit on bottom).


Bored = mm

Cutting circlediam. F = mm

f. knifeNo.

Forknives

Profiled body, without knives-20-50110-22026 20 x 30 x 2-20-50100-22023 25 x 25 x 2-20-50110-22025 25 x 30 x 2-20-50 90-2201 30 x 20 x 2-20-50100-2202/2a+b 30 x 25 x 2-20-50110-2203/3a+b/48 30 x 30 x 2-20-50 90-2204 40 x 20 x 2-20-50100-2205/5a+b 40 x 25 x 2-20-50110-2206/6a+b/49 40 x 30 x 2-20-50150-22020/21 40 x 50 x 2-20-50180-22029 40 x 66 x 2-20-50 90-2207 50 x 20 x 2-20-50100-2208/8a+b 50 x 25 x 2-20-50110-2209/9a+b/15/47 50 x 30 x 2-20-50110-22027/27a+b 60 x 30 x 2-20-50130-22030 60 x 40 x 2-20-50110-22017/19/19a+b 70 x 30 x 2-20-50110-22028100 x 30 x 2,5

Full size illustrations (foils) of the interchangable knives showing area available for profiling on pages6.35 - 6.39.

Extra costs: Z = 3 +12%, Z = 4 +25%Multi-piece cutter set: + 10% per cutterKeyway: single or double: Extra costs.Quantity discounts: for identical design: 2 pcs. -20%, 3-4 pcs. -30%, 5 pcs. -40%



● The design (MAN/MEC, single or multi-part,steel or aluminium body, number of teeth)and the edge geometry (cutting angle andshear angle) can be customized to suit theapplication.

● Interchangeable T.C. knives with 3-pointsupport for easy and precise positioningin the cutter body.

Determination of order detailsand prices

1. Choose the appropriate knife using the foils on pages 6.35 - 6.392. Determine the minimum cutting circle diameter (table on page 6.33)3. Basic price of body according to the currently valid price list. Surcharges and discounts to be taken into account.4. Part numbers of the knives according to page 6.34. Take into account quantity discounts and possible template costs.





Polished faceFor maximum tool life and improved quality ofcut all RAPIDO knives are also available withpolished face.Extra costs: 15%.

interchangeable T.C. knives for No. 64700€p.pc.

PUPart-No.€p.pc.

PUPart-No.f. knifeNo.


HW 04HW 02profiled

272530-6-20301-R- 2620 x 30 x 2-272530-6-25251-R 2325 x 25 x 2

272531-6-25301-R272530-6-25301-R 2525 x 30 x 2272531-6-30201-R272530-6-30201-R 130 x 20 x 2272531-6-30251-R272530-6-30251-R2/2a+b30 x 25 x 2272531-6-30301-R272530-6-30301-R3/3a+b/4830 x 30 x 2272531-6-40201-R272530-6-40201-R 440 x 20 x 2272531-6-40251-R272530-6-40251-R5/5a+b40 x 25 x 2272531-6-40301-R272530-6-40301-R6/6a+b/4940 x 30 x 2

-272530-6-40501-R 2040 x 50 x 2-272440-6-40661-R 2940 x 66 x 2

272531-6-50201-R272530-6-50201-R 750 x 20 x 2272531-6-50251-R272530-6-50251-R8/8a+b50 x 25 x 2272531-6-50301-R272530-6-50301-R9/9a+b/15/4750 x 30 x 2

-272530-6-60301-R27/27a+b60 x 30 x 2-272534-6-60401-R 3060 x 40 x 2

272530-6-70301-R-17/19/19a+b70 x 30 x 2-272530-6-10301-R 28100 x 30 x 2,5

Quantity discounts, ordering same profile: 5 to 9 pcs = 12 %, up from 10 pcs = 25 %.Template costs: up to 9 pcs only. Repeat orders of same profile: no template costs.

HW 02 = standard gradeHW 04 = for solid woodUnless otherwise instructed, we supply HW 02.

Order information:

- Profile shape (drawing or wood sample)- Knife No. (contains type and design of the body)- F x H x d (cutting circle diameter x width of knife x bore)- KN or DKN (if requested)- Steel or light metal cutter body (without statement = light metal)*- No. for direction of rotation as per ill. page 6.32(contains direction of rotation, large diameter on top/bottom and drive unit on bottom/top)

- Z = number of teeth (or detailed operating conditions)- MAN or MEC (manual or mechanical feed)*- With or without shear angle (without statement = definition JSO)*- Grade of T.C. or workpiece material (unless stated = HW 02)

* same price






Technical details:Tool body of steel or light metal for 2, 3, 4 or 6profiled interchangeable T.C. knives. Design withor without shear angle. Direction of rotationaccording to illustration. For manual ormechanical feed.


Application:For cutting decorative profiles in furniture anddoor production, as well as for ceiling or wallpanelling etc. on stationary routers and CNCmachines (drive unit on top) or on tablemoulders, moulding machines and double endtenoners (drive unit on bottom).


Bored = mm

Cutting circlediam. F = mm

f. knifeNo.

Forknives

Profiled body, without knives-20-50110-22026 20 x 30 x 2-20-50100-22023 25 x 25 x 2-20-50110-22025 25 x 30 x 2-20-50 90-2201 30 x 20 x 2-20-50100-2202/2a+b 30 x 25 x 2-20-50110-2203/3a+b/48 30 x 30 x 2-20-50 90-2204 40 x 20 x 2-20-50100-2205/5a+b 40 x 25 x 2-20-50110-2206/6a+b/49 40 x 30 x 2-20-50150-22020/21 40 x 50 x 2-20-50180-22029 40 x 66 x 2-20-50 90-2207 50 x 20 x 2-20-50100-2208/8a+b 50 x 25 x 2-20-50110-2209/9a+b/15/47 50 x 30 x 2-20-50110-22027/27a+b 60 x 30 x 2-20-50130-22030 60 x 40 x 2-20-50110-22017/19/19a+b 70 x 30 x 2-20-50110-22028100 x 30 x 2,5

Full size illustrations (foils) of the interchangable knives showing area available for profiling on pages6.35 - 6.39.

Extra costs: Z = 3 +12%, Z = 4 +25%Multi-piece cutter set: + 10% per cutterKeyway: single or double: Extra costs.Quantity discounts: for identical design: 2 pcs. -20%, 3-4 pcs. -30%, 5 pcs. -40%



● The design (MAN/MEC, single or multi-part,steel or aluminium body, number of teeth)and the edge geometry (cutting angle andshear angle) can be customized to suit theapplication.

● Interchangeable T.C. knives with 3-pointsupport for easy and precise positioningin the cutter body.

Determination of order detailsand prices

1. Choose the appropriate knife using the foils on pages 6.35 - 6.392. Determine the minimum cutting circle diameter (table on page 6.33)3. Basic price of body according to the currently valid price list. Surcharges and discounts to be taken into account.4. Part numbers of the knives according to page 6.34. Take into account quantity discounts and possible template costs.






interchangeable T.C. knives for No. 64700€p.pc.

PUPart-No.€p.pc.

PUPart-No.f. knifeNo.


HW 04HW 02profiled

272530-6-20301-R- 2620 x 30 x 2-272530-6-25251-R 2325 x 25 x 2

272531-6-25301-R272530-6-25301-R 2525 x 30 x 2272531-6-30201-R272530-6-30201-R 130 x 20 x 2272531-6-30251-R272530-6-30251-R2/2a+b30 x 25 x 2272531-6-30301-R272530-6-30301-R3/3a+b/4830 x 30 x 2272531-6-40201-R272530-6-40201-R 440 x 20 x 2272531-6-40251-R272530-6-40251-R5/5a+b40 x 25 x 2272531-6-40301-R272530-6-40301-R6/6a+b/4940 x 30 x 2

-272530-6-40501-R 2040 x 50 x 2-272440-6-40661-R 2940 x 66 x 2

272531-6-50201-R272530-6-50201-R 750 x 20 x 2272531-6-50251-R272530-6-50251-R8/8a+b50 x 25 x 2272531-6-50301-R272530-6-50301-R9/9a+b/15/4750 x 30 x 2

-272530-6-60301-R27/27a+b60 x 30 x 2-272534-6-60401-R 3060 x 40 x 2

272530-6-70301-R-17/19/19a+b70 x 30 x 2-272530-6-10301-R 28100 x 30 x 2,5

Quantity discounts, ordering same profile: 5 to 9 pcs = 12 %, up from 10 pcs = 25 %.Template costs: up to 9 pcs only. Repeat orders of same profile: no template costs.

HW 02 = standard gradeHW 04 = for solid woodUnless otherwise instructed, we supply HW 02.

Order information:

- Profile shape (drawing or wood sample)- Knife No. (contains type and design of the body)- F x H x d (cutting circle diameter x width of knife x bore)- KN or DKN (if requested)- Steel or light metal cutter body (without statement = light metal)*- No. for direction of rotation as per ill. page 6.32(contains direction of rotation, large diameter on top/bottom and drive unit on bottom/top)

- Z = number of teeth (or detailed operating conditions)- MAN or MEC (manual or mechanical feed)*- With or without shear angle (without statement = definition JSO)*- Grade of T.C. or workpiece material (unless stated = HW 02)

* same price





RAPIDO Interchangeable T.C. knives

HW 01 = for MDF and extremely abrasivematerialHW 02 = standard gradeHW 04 = for solid wood

Unless otherwise instructed, we supply HW 02(standard T.C. grade)

* HW 01 see page 6.41.

Quantity discounts, same profile: 5 - 9 pcs. =12%, up from 10 pcs. = 25%.

Template costs: up to 9 pcs. only. Repeatorders of same profile: no template costs.


72529/72530/72531/72534€p.pc.

Part-No.€p.pc.

Part-No.Designf. knifeNo.

B x H x Smm

HW 04HW 02-72530-6-20250-Runprofiled -20 x 25 x 2-72530-6-20251-Rprofiled72530-6-20300-R-unprofiled 2620 x 30 x 272530-6-20301-R-profiled-72530-6-25170-Runprofiled 1025x17,5x 1,7-72530-6-25171-Rprofiled-72530-6-25200-Runprofiled 2225 x 20 x 2-72530-6-25201-Rprofiled-72529-6-25250-Runprofiled 1625 x 25 x 2-72529-6-25251-Rprofiled-72530-6-25250-Runprofiled 2325 x 25 x 2-72530-6-25251-Rprofiled72531-6-25300-R72530-6-25300-Runprofiled 2525 x 30 x 272531-6-25301-R72530-6-25301-Rprofiled72531-6-30200-R72530-6-30200-Runprofiled 130 x 20 x 272531-6-30201-R72530-6-30201-Rprofiled72531-6-30250-R72530-6-30250-Runprofiled2/2a+b30 x 25 x 2 *72531-6-30251-R72530-6-30251-Rprofiled72531-6-30300-R72530-6-30300-Runprofiled3/3a+b/4830 x 30 x 272531-6-30301-R72530-6-30301-Rprofiled72530-6-30040-R72530-6-30350-Runprofiled 5030 x 35 x 2 *72530-6-30041-R72530-6-30351-Rprofiled-72529-6-32150-Runprofiled 2432 x 15 x 1,5-72529-6-32151-Rprofiled72531-6-40200-R72530-6-40200-Runprofiled 440 x 20 x 272531-6-40201-R72530-6-40201-Rprofiled72531-6-40250-R72530-6-40250-Runprofiled5/5a+b40 x 25 x 272531-6-40251-R72530-6-40251-Rprofiled72531-6-40300-R72530-6-40300-Runprofiled6/6a+b/4940 x 30 x 272531-6-40301-R72530-6-40301-Rprofiled72531-6-50200-R72530-6-50200-Runprofiled 750 x 20 x 272531-6-50201-R72530-6-50201-Rprofiled72531-6-50250-R72530-6-50250-Runprofiled8/8a+b50 x 25 x 272531-6-50251-R72530-6-50251-Rprofiled72531-6-50300-R72530-6-50300-Runprofiled9/9a+b/15/4750 x 30 x 272531-6-50301-R72530-6-50301-Rprofiled-72530-6-60300-Runprofiled27/27a+b60 x 30 x 2-72530-6-60301-Rprofiled-72534-6-60400-Runprofiled 3060 x 40 x 2-72534-6-60401-Rprofiled72530-6-70300-R-unprofiled17/19/19a+b70 x 30 x 272530-6-70301-R-profiled-72530-6-10300-Runprofiled 28100 x 30 x 2,5-72530-6-10301-Rprofiled

72533 specially for No. 22532€p.pc.

Part-No.€p.pc.


B x H x Smm

HW 04HW 0172533-6-18040-R72533-6-18010-Runprofiled 1840 x 30 x 272533-6-18041-R72533-6-18011-Rprofiled

72530/72440/72542 for No. 22530-97/22542/22440€p.pc.

Part-No.€p.pc.


B x H x Smm

HW 02-72530-6-40500-R-unprofiled 20/2140 x 50 x 272530-6-40501-R-profiled 2072542-6-40501-R-profiled 21

72440-6-40660-R-unprofiled 2940 x 66 x 272440-6-40661-R-profiled 29




SDZ RAPIDO Interchangeable T.C. knives





6.35

RAPIDO Interchangeable T.C. knivesOrder information: Knife No. 41/42 pages 6.3/6.4 – No. 43/44 page 6.11 – No. 45-49 pages 6.14-6.17 – No. 22-26 page 6.34

Area available for profiling (1:1)

12

17

17

24max. 23

6.5

max.40

14

for No. 22195 No. 41

max.51

30

50

10ϒ

max.60 max.80

30

max17

20

20

max7

25

25

max12

25

30

max17

25

for No. 22196 No. 42

for No. 22451No. 43

for No. 22451 No. 44

for No. 22543 No. 45

for No. 22545 No. 46for No. 22546 No. 47

for No. 22547 No. 48 for No. 22547 No. 49

No. 26 No. 22 No. 23 No. 25

max. 38

k06-35_en.indd 35 17.04.13 08:45

6.36

RAPIDO Interchangeable T. C. knivesOrder information on page 6.34

for No. 22534/No. 10 for No. 22529/No. 24 No. 1 No. 2 No. 2a

15max

7

32

30

40

30ϒ

25

30ϒ

40

45ϒ

30

40

30

max17

40

25

max12

40

20

max7

40

45ϒ

25

40

45ϒ 25

30

30ϒ

30

30

30ϒ

25

30

20max

7

30

25

max12

30

17.5

25


30max17

30

No. 2b No. 3 No. 3a

No. 4 No. 5 No. 5a

No. 6 No. 6a No. 6b

No. 5b

45ϒ30

30

No. 3b

k06-36_en.indd 36 17.04.13 08:46

6.37

RAPIDO Interchangeable T.C. knivesOrder information on page 6.34


for No. 22532 No. 18 No. 7 No. 8 No. 8a

40

30

max. 17

max7

20

50

max12

25

50

30

60

30°45˚

50

30

30˚

50

30

60

max1730

max. 1730

50

No. 9b No. 27 No. 27a

No. 9a

25

50

30°

45˚

50

25

No. 9No. 8b

k06-37_en.indd 37 17.04.13 08:46

6.38


66

40

60

40

70

30

30˚

70

30

45˚

70

max1730

30

6045°


for No. 22530-97 No. 20 for No. 22542 No. 21

No. 27b

for No. 22440 No. 29 for No. 22530-90 No. 30

No. 19 No. 19a No. 19b

40

50 50

k06-38_en.indd 38 17.04.13 08:46

6.39

RAPIDO Interchangeable T.C. knives

No. 28

Order information on page 6.34 – No. 15/17/32 on pages 7.13 – 7.16

30

100

for No. 22442

No. 31

for raised panel profiles

for No. 22436 – profile group I

for No. 22436 – profile group II

Jointing cutter Ø 22 mm No. 32/2

Jointing cutter Ø 22 mm No. 32/1

for No. 22438

for No. 22438-150

Jointing cutter Ø 22 mm No. 17


for No. 22436


for No. 22537

No. 33


k06-39_en.indd 39 17.04.13 08:53



11

24

17

35

22

55

30

17

50

22

60

15

76

17

60

45ϒ

40

45˚

40 x 36 x 2 mm for No. 22460 60 x 41 x 2 mm for No. 22460

30 x 35 x 2 mm for No. 22470 40 x 36 x 2 mm for No. 22470

30 x 25 x 2 mmfor No. 22480

40 x 36 x 2 mmfor No. 22480

60 x 41 x 2 mmfor No. 22480

40 x 36 x 2 mmfor No. 22485

60 x 41 x 2 mmfor No. 22485

6.40

k06-40_en.indd 40 17.04.13 08:53

for Multi-Profilers with back supportsSDZ Interchangeable T.C. knives




for Multi-Profilers with support platesInterchangeable T.C. knives

Polished face For maximum tool life and improved quality ofcut all interchangeable T.C. knives are alsoavailable with polished face.Extra costs: 15%.

72460/72470/72480/72485€p.pc.

Part-No.€p.pc.

Part-No.DesignForNo.

B x H x Smm

HW 04HW 0172531-6-30250-R72530-6-30010-Runprofiled2248030 x 25 x 272480-6-30041-R72480-6-30011-Rprofiled

72530-6-30040-R72530-6-30110-Runprofiled2247030 x 35 x 272470-6-30041-R72470-6-30011-Rprofiled

72470-6-40040-A72470-6-40010-Aunprofiled2247040 x 36 x 272470-6-40040-B72470-6-40010-Bunprofiled72470-6-40041-A72470-6-40011-Aprofiled72470-6-40041-B72470-6-40011-Bprofiled

72480-6-40040-R72480-6-40010-Runprofiled22460/80/8540 x 36 x 272460-6-40041-R72460-6-40011-Rprofiled2246040 x 36 x 272480-6-40041-R72480-6-40011-Rprofiled2248040 x 36 x 272485-6-40041-R72485-6-40011-Rprofiled2248540 x 36 x 2

72485-6-60040-R72485-6-60010-Runprofiled22460/8560 x 41 x 272460-6-60041-R72460-6-60011-Rprofiled2246060 x 41 x 272485-6-60041-R72485-6-60011-Rprofiled2248560 x 41 x 2

72480-6-60040-R72480-6-60010-Runprofiled2248060 x 41 x 272480-6-60041-R72480-6-60011-Rprofiled

HW 01 = for MDF and extremely abrasive materialsHW 04 = for solid wood

Interchangeable knives in standard grade HW 02 are specified together with the appropriate supportplates on the pages of corresponding basic tool bodies (pages 6.42 - 6.45).

Quantity discounts, ordering same profile: 5 to 9 pcs = 12 %, up from 10 pcs = 25%.Template costs: up to 9 pcs.only. Repeat orders of same profile: no template costs.

for LEUCO-Super-ProfilerInterchangeable T.C. knives72490

€p.pc.

Part-No.€p.pc.

Part-No.DesignB x H x Smm

HW 04HW 02Interch. T.C. knives

72490-6-42840-R72490-6-42820-Runprofiled40,6 x 28,2 x 1,572490-6-42841-R72490-6-42821-Rprofiled72490-6-63040-R72490-6-63020-Runprofiled60,8 x 30,2 x 1,572490-6-63041-R72490-6-63021-Rprofiled72490-6-64540-R72490-6-64520-Runprofiled60,6 x 45,6 x 272490-6-64541-R72490-6-64521-Rprofiled

Back supports72490-0-42800-R-unprofiled40 x 26,5 x 472490-0-42801-R-profiled72490-0-63000-R-unprofiled60 x 28,5 x 472490-0-63001-R-profiled72490-0-64500-R-unprofiled60 x 43 x 672490-0-64501-R-profiled

HW 02 = standard gradeHW 04 = for solid wood

Quantity discounts, same profile: 5 - 9 pcs. = 12%, up from 10 pcs. = 25%.Template costs: up to 9 pcs. only. Repeat orders of same profile: no template costs.





Multi-Profile Cutterhead for T.C. knives Z2

Technical details:Tool body for profiled interchangeable T.C.knives with support plate. Also designed to beface ground. For mechanical feed.

Please order the interchangeable T.C. knivesand support plates in addition (see page 6.41).

Application:For cutting decorative profiles in furniture anddoor production, as well as for ceiling and wallpanelling, etc. on stationary routers and CNCmachines.

R.P.M. max. = 12 000 (L₂ 30 and 40 mm)R.P.M. max. = 9 000 (L₂ 60 mm)

22480 tool body€p.pc.

Part-No.€p.pc.

Part-No.Shankmm

L₁mm

L₂mm

Dmm

Fmm

Right-hand rotationLeft-hand rotation22480-0-60303-R-16 x 45 m. E. M 6 853056 6022480-0-90406-R22480-0-90406-L25 x 55 m. E. M 81094080 9022480-0-10606-R-25 x 55 m. E. M 81296090100

Interchangeable T.C. knives and support plates€p.pc.

PUPart-No.Profile depthmax. mm

ForF = mm


Interchangeable T.C. knives - HW 02* (standard grade)272530-6-30250-Runprofiled11 6030 x 25 x 2272480-6-30021-Rprofiled272480-6-40360-Runprofiled17 9040 x 36 x 2272480-6-40361-Rprofiled272480-6-60410-Runprofiled, bevel 30°2210060 x 41 x 2272480-6-60411-Rprofiled

Support plates 4,2 mm thickness272481-0-30250-Runprofiled30 x 25 x 2272481-0-30251-Rprofiled272481-0-40360-Runprofiled40 x 36 x 2272481-0-40361-Rprofiled272482-0-60410-Runprofiled, bevel 30°60 x 41 x 2272482-0-60411-Rprofiled

* HW 01 (for MDF) and HW 04 (for solid wood) see page 6.41.

Quantity discounts, ordering same profile: 5 - 9 pcs. = 12%, up from 10 pcs. = 25%.Template costs: up to 9 pcs. only. Repeat orders of same profile: no template costs.


239280-0-03000-R30 mm, Right-hand rotationClamping wedge239280-0-04000-R40 mm, Right-hand rotationClamping wedge

239280-0-04000-L40 mm, Left-hand rotationClamping wedge239280-0-06000-R60 mm, Right-hand rotationClamping wedge

1039266-0-06008-RM 6 x 8 ISO 4028, for F = 60 mmAllen screw539072-0-08012-RM 8 x 12, for F = 90/100 mmBall pressing screw






Technical details:Tool body for profiled interchangeable T.C.knives with support plates. Mechanical feed.



R.P.M. max. = 12 000 (L₂= 40 mm)R.P.M. max. = 9 000 (L₂= 60 mm)


Part-No.€p.pc.

Part-No.Shankmm

L₁mm

L₂mm

Dmm

Fmm

Right-hand rotationLeft-hand rotation22485-0-90406-R22485-0-90406-L25 x 55 m. E. M 81094080 9022485-0-10606-R-25 x 55 m. E. M 81296090100



ForF = mm


Interchangeable T.C. knives - HW 02* (standard grade)272480-6-40360-Runprofiled17 9040 x 36 x 2272485-6-40361-Rprofiled272485-6-60410-Runprofiled2210060 x 41 x 2272485-6-60411-Rprofiled

Support plates 4,2 mm thickness272481-0-40360-Runprofiled40 x 36 x 2272481-0-40361-Rprofiled272481-0-60410-Runprofiled60 x 41 x 2272481-0-60411-Rprofiled




239280-0-04000-R40 mm, Right-hand rotationClamping wedge239280-0-04000-L40 mm, Left-hand rotationClamping wedge


539072-0-08012-RM 8 x 12Ball pressing screw139140-0-00401-0SW 4Key with T-handle






Technical details:Tool body for profiled interchangeable T.C.knives with support plate. Also designed to beface ground. For mechanical feed.



R.P.M. max. = 12 000 (L₂ 30 and 40 mm)R.P.M. max. = 9 000 (L₂ 60 mm)


Part-No.€p.pc.

Part-No.Shankmm

L₁mm

L₂mm

Dmm

Fmm

Right-hand rotationLeft-hand rotation22480-0-60303-R-16 x 45 m. E. M 6 853056 6022480-0-90406-R22480-0-90406-L25 x 55 m. E. M 81094080 9022480-0-10606-R-25 x 55 m. E. M 81296090100



ForF = mm


Interchangeable T.C. knives - HW 02* (standard grade)272530-6-30250-Runprofiled11 6030 x 25 x 2272480-6-30021-Rprofiled272480-6-40360-Runprofiled17 9040 x 36 x 2272480-6-40361-Rprofiled272480-6-60410-Runprofiled, bevel 30°2210060 x 41 x 2272480-6-60411-Rprofiled

Support plates 4,2 mm thickness272481-0-30250-Runprofiled30 x 25 x 2272481-0-30251-Rprofiled272481-0-40360-Runprofiled40 x 36 x 2272481-0-40361-Rprofiled272482-0-60410-Runprofiled, bevel 30°60 x 41 x 2272482-0-60411-Rprofiled





239280-0-04000-L40 mm, Left-hand rotationClamping wedge239280-0-06000-R60 mm, Right-hand rotationClamping wedge

1039266-0-06008-RM 6 x 8 ISO 4028, for F = 60 mmAllen screw539072-0-08012-RM 8 x 12, for F = 90/100 mmBall pressing screw






Technical details:Tool body for profiled interchangeable T.C.knives with support plates. Mechanical feed.



R.P.M. max. = 12 000 (L₂= 40 mm)R.P.M. max. = 9 000 (L₂= 60 mm)


Part-No.€p.pc.

Part-No.Shankmm

L₁mm

L₂mm

Dmm

Fmm

Right-hand rotationLeft-hand rotation22485-0-90406-R22485-0-90406-L25 x 55 m. E. M 81094080 9022485-0-10606-R-25 x 55 m. E. M 81296090100



ForF = mm


Interchangeable T.C. knives - HW 02* (standard grade)272480-6-40360-Runprofiled17 9040 x 36 x 2272485-6-40361-Rprofiled272485-6-60410-Runprofiled2210060 x 41 x 2272485-6-60411-Rprofiled







539072-0-08012-RM 8 x 12Ball pressing screw139140-0-00401-0SW 4Key with T-handle





Angled Multi-Profiler for T.C. knives Z2

Technical details:Tool body for profiled interchangeable T.C.knives with support plates, D = 119 mm madeof high-quality, light metal. The unprofiled T.C.knives can be also used for the multi-profilecutterheads Nos. 22480/485 (pages 6.42/6.43).For mechanical feed.

Please order the interchangeable T.C. knivesand support plates in addition(see page 6.41).

Application:Especially for large, deep, decorative profiles infurniture and door production, as well as ceilingor wall panelling on stationary routers and CNCmachines.

R.P.M. max. = 12 000 (Fmax= 110 mm )R.P.M. max. = 8 000 (Fmax= 148 mm)


Part-No.€p.pc.

Part-No.Shankmm

L₁mm

L₂mm

Dmm

Fmax

mm

Right-hand rotationLeft-hand rotation22460-0-00006-R-25 x 55 m. E. M 81234086,511022460-0-00606-R22460-0-00606-L25 x 55 m. E. M 814260119148*


PUPart-No.ForFmax.= mm


Interchangeable T.C. knives - HW 02* (standard grade)272480-6-40360-Runprofiled11040 x 36 x 2272460-6-40361-Rprofiled272485-6-60410-Runprofiled14860 x 41 x 2272460-6-60411-Rprofiled


*Can be supplied also with shanks SK 30/40, MK 2, HSK-F 63 (on request).

* HW 01 (for MDF) and HW 04 ( for solid wood) see page 6.41.




239280-0-06000-L60 mm, Left-hand rotationClamping wedge539072-0-08012-RM 8 x 12Ball pressing screw





Bottom Cutting Multi-Profiler for T.C. knives Z2

Technical details:Tool body for profiled interchangeable T.C.knives with support plates. Right-hand rotation.For mechanical feed.Equipped with 1 pc. interchangeable T.C. knifeeach, Type A and B, as well as with 2 supportplates, Fmax 60 mm tool with 2 knives and supportplates of the same type.

Application:For cutting wide profile grooves, rosettes, flat,deep profiles, e.g. raised panels on CNCmachines. Also applicable for rebating andsurfacing operations.



Part-No.Shankmm

L₁mm

L₂mm

Pmm

Dmm

Fmax

mm

Left-hand rotation22470-0-60005-R20 x 55 m. E. M 81053415626022470-0-00006-R25 x 55 m. E. M 811235177676


PUPart-No.TypeForF = mm


Interchangeable T.C. knives - HW 02* (standard grade)272530-6-30350-Runprofiled6030 x 35 x 2272470-6-30021-Rprofiled272470-6-40360-AunprofiledA7640 x 36 x 2272470-6-40360-BunprofiledB272470-6-40361-AprofiledA272470-6-40361-BprofiledB







539072-0-08012-RM 8 x 12 (for F = 76 mm)Ball pressing screw539072-0-06010-RM 6 x 10 (for F = 60 mm)Ball pressing screw






Angled Multi-Profiler for T.C. knives Z2

Technical details:Tool body for profiled interchangeable T.C.knives with support plates, D = 119 mm madeof high-quality, light metal. The unprofiled T.C.knives can be also used for the multi-profilecutterheads Nos. 22480/485 (pages 6.42/6.43).For mechanical feed.

Please order the interchangeable T.C. knivesand support plates in addition(see page 6.41).

Application:Especially for large, deep, decorative profiles infurniture and door production, as well as ceilingor wall panelling on stationary routers and CNCmachines.



Part-No.€p.pc.

Part-No.Shankmm

L₁mm

L₂mm

Dmm

Fmax

mm

Right-hand rotationLeft-hand rotation22460-0-00006-R-25 x 55 m. E. M 81234086,511022460-0-00606-R22460-0-00606-L25 x 55 m. E. M 814260119148*


PUPart-No.ForFmax.= mm


Interchangeable T.C. knives - HW 02* (standard grade)272480-6-40360-Runprofiled11040 x 36 x 2272460-6-40361-Rprofiled272485-6-60410-Runprofiled14860 x 41 x 2272460-6-60411-Rprofiled


*Can be supplied also with shanks SK 30/40, MK 2, HSK-F 63 (on request).

* HW 01 (for MDF) and HW 04 ( for solid wood) see page 6.41.




239280-0-06000-L60 mm, Left-hand rotationClamping wedge539072-0-08012-RM 8 x 12Ball pressing screw





Bottom Cutting Multi-Profiler for T.C. knives Z2

Technical details:Tool body for profiled interchangeable T.C.knives with support plates. Right-hand rotation.For mechanical feed.Equipped with 1 pc. interchangeable T.C. knifeeach, Type A and B, as well as with 2 supportplates, Fmax 60 mm tool with 2 knives and supportplates of the same type.

Application:For cutting wide profile grooves, rosettes, flat,deep profiles, e.g. raised panels on CNCmachines. Also applicable for rebating andsurfacing operations.



Part-No.Shankmm

L₁mm

L₂mm

Pmm

Dmm

Fmax

mm

22470-0-60005-R20 x 55 m. E. M 81053415626022470-0-00006-R25 x 55 m. E. M 811235177676


PUPart-No.TypeForF = mm


Interchangeable T.C. knives - HW 02* (standard grade)272530-6-30350-Runprofiled6030 x 35 x 2272470-6-30021-Rprofiled272470-6-40360-AunprofiledA7640 x 36 x 2272470-6-40360-BunprofiledB272470-6-40361-AprofiledA272470-6-40361-BprofiledB







539072-0-08012-RM 8 x 12 (for F = 76 mm)Ball pressing screw539072-0-06010-RM 6 x 10 (for F = 60 mm)Ball pressing screw






Special Tools w. rev. or interch. T.C.tips



= popular size, ex stock = while stocks last6.46 = popular size, ex stock

= while stocks lastPU = packing unit

= supplement Z = number of cutting edges

7.01


Documents

Dovetail Cutter with reversible T.C. tips Z2 · 2018-08-22 · PU = packing unit = supplement Z = number of cutting edges = popular size, ex stock 6.02 = while stocks last Dovetail