Dovetail Drawer Boxes - gahwd.com · 6/2/2014 · Drawer Box Material B10. Georgia Hardwoods Inc 800-992-6426 Fax: 678-546-6105 B11 Warranty Wood is a material formed by nature,

• M a d e i n U S A

• S o l i d H a r d w o o d / P l y w o o d

• Q u i c k L e a d T i m e s

• C u s t o m I n s e r t s

• P r e f i n i s h i n g Av a i l a b l e

• S p e c i a l t y O p t i o n s

3061 Verona Ave Buford, Ga 30518

(800) 992-6426 (770) 932-0640Please call for more information or visitwww.gahwd.com

Dovetail Drawer Boxes

GeorgiaHardwoods Inc

6/2/2014

Drawer boxes can be ordered in 1/16” increments for both width height and depth. Boxes over 36” will have center support in glued to the bottom of the drawer along the depth

measurement.

Maximum Sizes:Width: 48”Depth: 60”Height: 29”

BB-Bot(Bottom Mount)

Bottom Panel Options

BB-INS(Inset for 1/4”)

BB-025 (Standard)

BB-050 (1/2” Thick Bottom)

1/2” 1/2”

Drawer Box Dimensions

Height

Width

Depth

Minimum Sizes:Width: 4”Depth: 4”

Height: 1-3/4”

Georgia Hardwoods Inc □ 800-992-6426 □ www.gahwd.com □ Fax: 678-546-6105


B2

Front

DE1

Flush top edges on all sides.Standard Edge on edgebanded

plywood drawer boxes.No up charge

Drawer runner notching

Top Edge Pro�les

DE2

Eased top edges on all sides Standard Edge on solid wood

drawer boxes.No up charge.

DE3

Round over edges on all sides Standard Edge on Russian Birch

raw and pre�nished drawer boxes. No up charge.

$4.00 Per Box

Notching for undermount slides available on all drawer boxes. Standard 2” wide notch includes

rear hook hole. Priced per box.

DN-200 2” Notch with hole. (Standard)

DN-150 1-1/2” Notch with hole.DN-CEN 2” Notch in center back panel

Hook Hole Location

15/16”

Notch hook hole is located on center 15/16” from the bottom and 7/8” from the side. The hole is 1/4” diameter, machined 5/16” deep. This is the standard location for all popular undermound drawer slide

systems.

7/8”



B3

All scoops are machined in center of front panel.Scoops available on all drawerside material.

Charge is for 1 scoop per drawer, additional scoops are charged the per scoop price.

Custom scoops can be machined for an additional charge. Customer must supply scoop shape/design by cad �le or hard sample. 25.00 setup fee will apply plus regular scoop fee.

SC-13” x 1”

SC-22-1/4” x 1-1/8”

SC-34-1/8” x 1”

SC-44” x 1”

SC-53-3/4” x 1-3/4”

SC-64-3/4” x 1-3/8”

$3.00 Per Scoop



B4

Hand Scoops

Optional Side designs for cabinet pullout drawer boxes. Available on all drawer side material. Cus-tomer must supply custom measurements. Scoops and ears can be added. Priced per box.

SD-1From back to 1/2 total height of front panel.

SD-21/2 total depth from back to 1/2 total height of front panel.

SD-31/4 total depth from back to 1/2 total height of front panel.

$15.00 Per BoxSide Designs

EarsOptional ears are for use with internal drawer boxes to extend past the drawer slide hardware. Avail-able with both a lap joint or a dovetail joint. When ordering, do not include the width of the ears. All

ears extend 1/2” on both sides.

$4.00 Per Box



B5

Pot Pullout Drawer BoxO�ered in standard 21” depth and 24” height with customer supplied width. Bullnosed upper shelves

are rabbetted at 5 degree angle into solid maple sides. Bottom and back panels are 1/2” plywood. 5-7 day lead time, clear coat �nishing available.

$150.00 Per Box

Wine Cube/Apothecary Drawer BoxesMade with solid wood in sections of 5, 6 or 7 cubes from any specie. Each unit is 6-1/4” tall over all with

and internal opening of 5-1/4”. The widths are 30” for 5 openings, 36” for 6 openings and 42” for 7 openings. Each unit is 12” deep to allow for under cabinet mounting or counter top stacking. Drawer

boxes and drawer fronts are sold seperately. Replace ** with specie abbreviation. All cubes, boxes and fronts are stocked in Maple, Cherry, Alder and Red Oak.

GH-CUBE30-**GH-CUBE36-**GH-CUBE42-**

Drawer boxes for the apothecary systems are sold seperately. Each box is 5-1/8” wide x 10-1/4” deep x 5” tall. Made from solid Maple wood with dovetail ends.

GH-CUBEBOX-**

Drawer fronts are 3/4” thick x 5-3/4” square and can be machined with any edge. Stock drawer fronts for apothecary drawer systems have OE-46 edge pro�le. See page D14 of the door speci�cation manual.

GH-CUBEFRT-**

21”

24”

Top shelf is 4” from topSecond Shelf is 12” from top.


Dovetail Drawer Boxes Specialty

B6

Cutlery Inserts

Utensil Inserts

GH-INST-CT1515-1/8”w x 22”d x 2-7/8”tCan be cut down to 9” wPockets are 2-3/8” wideMade from MaplePre�nished clear.

GH-INST-CT2020-5/8”w x 22”d x 2-7/8”tCan be cut down to 14-5/8”w Pockets are 2-3/8” wideMade from MaplePre�nished clear

GH-INST-UT1818-1/8”w x 22”d x 2-7/8”tCan be cut down to 8-1/8”w Pockets are 3-1/8” wideMade from MaplePre�nished clear

GH-INST-UT2424”w x 22”d x 2-7/8”tCan be cut down to 12-1/8”wPockets are 3-1/8” wideMade from MaplePre�nished clear

Spice Inserts

GH-INST-SP1818”w x 19-3/4”d x 1-1/2”t

GH-INST-SP2424”w x 19-3/4”d x 1-1/2”tMade from Maple - Pre�nished clear

Knife Inserts GH-INST-KN1818-1/2”w x 22”d x 2-1/2”tMade from MaplePre�nished Clear


Dovetail Drawer BoxesCut to size drawer inserts

B7

DI-21Min Size: 5”w x 4”d

Min SqFt: 1.25Design Fee: $8.00







Custom inserts are made to order inserts to �t inside drawer boxes. Inserts have a design fee and are billed by the square foot. Inserts not meeting minimum square foot requirement will be chared the minimum. Minimum height is 1-1/2”. Pockets equally spaced but can be speci�ed by the customer. Pre�nishing is available.












Made to Order Inserts

B8

DI-42BMin Size: 7”w x 6”d


DI-53BMin Size: 7”w x 10”d





Min SqFt: 2Design Fee: $23.00







Cut To Fit Dividers

Cut to �t insert dividers are availble for customers who need to maximize their drawer depth space. Available sizes are 4“ and 8” depths. Available in a kit consisting of 1 pc 4’ long of groove moulding for 4” kit and 2 pcs of 4‘ long groove moulding with 8“ kit plus 2 - 4’ pieces of 3/8” divider material all made from solid Maple. All pieces have been clear coated. Kit includes 1/2” �at head screws. (It is recommended to predrill all holes during assembly to eliminate splitting)

Part Numbers

GH-INSRT-KIT4GH-INSRT-KIT8


Made to Order Inserts

B9

35202 4” Maple Drawerside UV/Coated35203 6” Maple Drawerside UV/Coated35204 8” Maple Drawerside UV/Coated35205 10” Maple Drawerside UV/Coated

35002 4” Import Birch Drawerside UV/Coated35003 6” Import Birch Drawerside UV/Coated35004 8” Import Birch Drawerside UV/Coated35005 10” Import Birch Drawerside UV/Coated

Solid Wood

Baltic Birch

Drawer boxes made from solid wood have an eased edge along the top. The raw drawer side material is available for purchase seperately in 4”, 6”, 8” ,10” heights and has a 1/4” groove 1/2” from the bottom Heights of 8” and 10” may be glued up from narrower stock. Sold by the linear foot.

35024 4” Solid Maple Drawerside35026 6” Solid Maple Drawerside35028 8” Solid Maple Drawerside35029 10” Solid Maple Drawerside

Pre-Finished

Drawer boxes made from Russian Birch have a radiused top edge showing the plywood core. Avialable in pre�nished and raw in heights 4”, 6”, 8” and 10”. Each side has a 1/4” groove 1/2” from the bottom. Sold by the 5’ piece.

Drawer boxes made from pre-�nished Imported Birch or Domestic Maple have an edge banded top edge to hide the plywood core. Material is available in 4”, 6”, 8” and 10” heights and has a 1/4” groove 1/2” from the bottom. Sold by the 8’ piece.

35104 4” Russian Birch Drawerside Un�nished35106 6” Russian Birch Drawerside Un�nished35108 8” Russian Birch Drawerside Un�nished35110 10” Russian Birch Drawerside Un�nished

35404 4” Russian Birch Drawerside UV/Coated35406 6” Russian Birch Drawerside UV/Coated35408 8” Russian Birch Drawerside UV/Coated35410 10” Russian Birch Drawerside UV/Coated


Drawer Box Material

B10

B11Georgia Hardwoods Inc □ 800-992-6426 □ www.gahwd.com □ Fax: 678-546-6105

Warranty

Wood is a material formed by nature, not man, and must be handled as such. Climate, light, rainfall and minerals in the soil all create diverse grain and color patterns that make every tree unique. The in�nite variety in color, grain, and texture are what give wood its natural character and are not considered defects. We guarantee our drawer boxes to be free from defect in material and workmanship for one year from the ship date. Our warranty covers only the replacement of defective products manufactured by Georgia Hardwoods. Georgia Hardwoods will not be liable for costs related to travel expenses, installation, �nishing or labor to remove and install new products. This warranty does not apply to damages resulting from improper handling, alterations made to our drawer boxes, or inappropriate storage, and does not cover any product used or installed in connection with our products. Our liability is limited to the net invoice price of defective drawer boxes only. No other warranties are implied or expressed. Natural wood will expand and contract with changes in the climate. This natural phenomenon can have a negative e�ect on wood drawer boxes that are left un�nished. Our drawer boxes are constructed to allow for proper wood movement, however we strongly advise that the drawer boxes be stored in an area that has controlled humidity and be sealed and top coated on all sides within seven days. Sealing and top coating wood drawer boxes will slow down the moisture absorption from humid conditions and greatly reduces the chances of warping and cracking problems that are seen in drawer boxes that are left un�nished. Georgia Hardwoods will not be liable for problems with drawer boxes that have been left un�nished for more than one week after delivery. All warranties are voided for any drawer boxes, raw or �nished, that have been stored or installed in an area without controlled humidity. Georgia Hardwoods will not warranty issues that could have been prevented, such as improper surface preparation before �nishing. Our drawer boxes are sanded to180 grit and are ready to accept most �nishes; however some specialized �nishes may require additional preparation. Application of �nish materials implies that the drawer boxes are accepted as suitable for the �nish you have selected. If in doubt, test the �nish on one of the drawer boxes before �nishing the entire job. Most customers �nish our drawer boxes right out of the box , however it is recommended that you lightly sponge sand your drawer boxes with the same grit you sanded your cabinets to remove any burnish marks or scratches that may occurred from handling during packaging or shipping. If un�nished drawer boxes are replaced at no charge, Georgia Hardwoods will not be liable for �nishing costs. REASONABLE TREATMENT REQUIREMENTS: • Drawer boxes are not to be stored in freshly plastered or damp work sites. • Drawer boxes are to be sealed with equal coats of finish on both sides and all edges within one week from delivery in order to minimize moisture absorption. • Drawer boxes are not to be exposed to excessive moisture, heat, cold, drastic swings in humidity, dryness, sunlight, abrasive cleaners or solvents. Wood drawer boxes should never be left on a construction site that is open to the elements. • Wood drawer boxes should be kept in a humidity controlled environment through all seasons. Due to normal wood movement, stile and rail joints may open slightly during a regular heating and cooling cycle. This is normal and is not subject to no charge replacement. • If needed, clean drawer boxes with a damp cloth followed by a dry towel. Do not use a wet sponge. Avoid excessive moisture and do not leave moisture standing on drawer boxes. Do not let water run into the rail grooves.

B12 Georgia Hardwoods Inc □ 800-992-6426 □ www.gahwd.com □ Fax: 678-546-6105

Warranty

Contact information:Georgia Hardwoods Inc. 3061 Verona Ave. Buford, Ga. 30518800-992-6426770-932-7643 door sales fax678-546-6105 doorshop o�ce fax

Email: [email protected]: www.gahwd.com Production scheduling and con�rmationsOrder con�rmations are normally faxed but can be emailed if requested. There are three dates on our con�rmations. Order Date, Due Date and Pre-Finish Due: The Order Date is the date the quote or order was entered. The day the order is placed is not counted as a production day. The Due Date is the date the doors (un�nished) are scheduled to complete in the shop. The Pre-Finish Due date is the date that pre-�nished orders are scheduled to complete.

We do our best to produce your order by these dates but completion dates are not guaranteed and may vary due to unforeseen events or order volume. The scheduled due dates are the estimated dates the orders are to complete and not necessarily the dates they will ship out or arrive at your shop. Depending on how the doors are to be shipped please allow another 1-2 days for packaging and cure times for pre-�nished doors. Be sure to allow enough time for delivery when scheduling time in your shop or installation.

We will accommodate rush orders when we can. Depending on the type of door requested or the workload in the shop at the time of the request, we may not be able to rush your order. We believe that all customers orders are equally important and therefore a rush order will not be taken if it will cause a delay of production for other existing orders. If we are able to accept a rush order there will be a 30% up charge for any order shipped in less time than our regular lead time. There will be a 50% up charge for rushes in 3 days or less. Lead times for complex styles (non-standard rails, multiple panels, radiuses, etc…) will not be con�rmed until all details are supplied. Rush con�rmation dates are manufacturing times only. You need to specify if you need expedited shipping as well.

Order Con�rmationsIn order to produce orders on schedule, most orders will go into production in less than 24 hours after con�rmations are signed. Any changes made after that time will be subject to extra charges. If we are not able to rework the parts to accommodate changes you will be responsible for the cost of the original parts plus the price of the new changes.

Due to material, shipping and energy costs, list prices can change without notice. If you need a current list price sheet please contact your sales representative. Quotes are honored for 30 days. Georgia Hardwoods reserves the right to pass along surcharges from suppliers resulting from energy or fuel related increases.


Shipping

Shipping Orders that meet the minimum amount are delivered at no charge on our trucks within our regular delivery area. Contact your sales representative for details. Orders outside of our delivery range are shipped LTL or UPS. There is a $.15 per square foot handling/ packaging charge on all orders.

LTL orders shipped in the southeastern states that total $2,000 or more are shipped without freight charges but with a $35.00 packaging material/crate charge.

LTL orders less than $2,000 are charged a percentage which includes the packaging material/crate charge.Shipping charges for orders totaling less than $2,000 are calculated by the percentages below: • 0-$900 are charged 15% ($135 or less) • $900-$1,200 are charged 12% ($108 - $144) • $1,200-$2,000 are charged 10% ($120-$200)

If multiple orders are shipped together to the same location, the total of all the orders can be combined to reach the $2,000 minimum for free shipping.

Individual quotes or orders that fall below the $2,000 minimum will be con�rmed with the shipping charges added on each order based on the above percentages with the understanding that at the time of shipment we will consoli-date all orders that are ready to ship and if the total orders exceed the $2,000 minimum, the shipping charges will be adjusted according to the rates listed above. Free freight only applies to door or drawer box orders not lumber or plywood.

Damage claims • Be sure to inspect all packaging at the time of delivery. If there is no visible damage to the packaging note “Subject to inspection for internal damage” on the freight bill. • If the packaging looks to be damaged even slightly, note it in detail on the freight bill. If the packaging looks to be compromised, it would be prudent, if at all possible, to open the crate and inspect the doors before the driver leaves. Note any visible damage on the freight bill. • Notify Georgia Hardwoods immediately of any damage. Damaged products will be replaced as quickly as possible at no charge. • Georgia Hardwoods will handle filing the damage claims. Please notify us as soon as possible. Claims must be �led with the carriers within 10 days. The carrier may require inspection of the damaged order. Please keep the doors in the original packaging until an onsite inspection is complete. The carrier may choose to pick-up the doors for inspection at their terminal or our facility. • We do not guarantee the condition of any UPS shipments.

B13

12

345

678

91011

121314

151617

18

Sales Rep:

DRAWER BOX

Wood Species

Bottom Thickness

Bottom Mount:

Faxed By: __________________ Date/Time:__________________ Initial if Correct: _____________ Fax Back to: (678) 546-6105 CONFIRMATIONS NOT RETURNED WITHIN 24 HOURS WILL BE CONSIDERED CORRECT.

Total Drawer Boxes _________

QUOTE ONLYGeorgia Hardwoods Inc3061 Verona Ave • Buford, GA

(770) 932-0640 • (800) 992-6426

FAX (678) 546-6105

ALLOW 1-2 DAYS FOR DELIVERY $300 MINIMUM FOR DELIVERY VAN LUM UPS CPU LTL

Other:________________________

BB-025

Undermount Slide Notching

2”

Download at www.gahwd.com/docs6/3/2014

Date:

Order:

Customer/Acct#:

Job/PO:

Phone:

Fax:

Email:

_____________________________________

_____________________________________

_____________________________________

_____________________________________

_____________________________________circle

______________________

______________________

______________________

Finishing

Wall Thickness

Clear Only

BB-050BB-BotBB-Ins

1-1/2”

CENTER ________”

(DN-200 Standard)

_____Natural Maple _____Select White Maple _____Cherry _____Mahogany _____Pine

1/4” 1/2” 1/2”

5/8” 3/4”

Glued Bottom

Hot Glue Bottom Panel

Surcharge may apply

1 4-1/2 22 12 SC-1 SD-2

Scoops - Pg D4SC-1 thru SC-6

Side Designs - Pg D5SD-1 thru SD-3

Ears - Pg D5L-Lap Joint or D-Dovetail

Inserts - Pg D8, D9DI-** If insert is choosenwe will calculate the boxdimensions. Depth must be supplied

L DI-22 2-1/4”

Options Notes

(DN-150)

(DN-CEN)

Other:________________________

Edge Profile

Square(Eased Standard)

Height (h) Width (w) Depth (d)Qty Scoop Side Design Ears Insert Notes

4” (DN-400)

Custom Match SN:__________________

Documents

Dovetail Drawer Boxes - gahwd.com · 6/2/2014 · Drawer Box Material B10. Georgia Hardwoods Inc 800-992-6426 Fax: 678-546-6105 B11 Warranty Wood is a material formed by nature,