Download the Driver for your Operating System1. Download the driver for your operating system at:http://business.toshiba.com/support/downloads.jsp?SELCTD_MODEL=e-STUDIO255&AXN=SELCTD2. Find the Duplex, Monochrome driver that matches your current version of OS X 10

Installing MBS Library Printer (OSX 10)1. Find the (TOSHIBA_Mono MFP_X7.dmg) file you downloaded and double click to

open

2. Double click installation box

3. Continue thru

4. Agree

5. Install

6. Enter user password and accept, once completed hit accept and exit

7. Go to System Preferences and open the Printers & Scanners

8. A new printer was installed in the School Library January 2015, if you have a MBS Library Printer already installed (as depicted here) delete it by pressing the (-) button below the list. If this is your first time installing a MBS Library printer hit the (+) instead to install a new printer.

9. Click on the “IP” tab at the top10.Enter 10.0.1.4 into the Address bar11. Change the Name to be MBS Library Printer ****DO NOT CLICK ADD YET****

12.The default is Generic PS Printer this must be changed to select the driver you just installed

13.Click on “Use” and click Select Software…

14.Select the Toshiba MonoMFP-X7 USA driver from the list of drivers, then press OK

15.Select print parameters for the printer: Model Selection: TOSHIBA e-STUDIO507SeriesFinisher: Offset TrayDrawers: Drawer 1 & Drawer 2External LCF: Not Installed

Click OKClick ADD

YOU SHOULD NOW BE ABLE TO PRINT!!