download the full catalog here

Catalog C-13

Air ToolsQUALITY TOOLS & PARTS

FULL TECHNICAL SUPPORT

CUSTOM TOOL DESIGN & PRODUCTION

FAST DELIVERY

MADE IN THE U.S.A.

58C Vertical Cup Grinder

400HGE Die Grinder

56H Horizontal Type 1 Grinder

400GHD Horizontal Die Grinder

520H Horizontal CW Ginder

400RA Right Angle Type 27 Grinder

400RA Right Angle Sander

300HGE Die Grinder

300GH Horizontal Die Grinder

Belt Sander

Aluminum FounDRySTEEl/iRon FounDRy

Primary Industries Served

POPULAR TOOLS POPULAR TOOLS

400HGE Die Grinder



54VK Vertical Cup Grinder

HEAVy FABRiCAToRliGHT FABRiCAToR


300RAD Right Angle Die Grinder



300HGE Die Grinder

Primary Industries Served

POPULAR TOOLS POPULAR TOOLS

WoRK SAFETy – Safe installation & Working Healthy Page 3-5

VERTiCAl GRinDER/SAnDER inFoRmATion Page 6

Vertical Grinders for use with Type 27, Type 27 Cut-off (Type 42) & 28 Depressed Center Wheels

moDEl numBER PAGE no.

520VPage 7

54V

64VPage 8

727V

Vertical Grinders for use with Type 11 Cup Wheels

520VPage 9

58C

68CPage 10

711C

Pile Cutters for use with Bonded Type 1 Cut-off (Type 41) or Diamond Wheels

56PCPage 11

66PC

Vertical Sanders for use with Surface Conditioning Abrasives

520VPage 12

56S

RiGHT AnGlE GRinDER inFoRmATion Page 14

Right Angle Grinders for Type 27, Type 27 Cut-off (Type 42), Type 1 Cut-off (Type 41) Wheels

300RAPage 16

400RA

300RAEPage 17

400RAE

320RAPage 18

420RA

520RA Page 19

RiGHT AnGlE DiE GRinDER inFoRmATion Page 20

Right Angle Grinders for Carbide Burrs, mounted Stones and Surface Conditioning Abrasives

300RADPage 22

410RAD

300RAEDPage 23

410RAED

330RADPage 24

340RAD

320RADPage 25

420RAD

300VGE Page 26

RiGHT AnGlE SAnDER inFoRmATion Page 28

Right Angle Sanders for Surface Conditiong Abrasives

300RA/307RAPage 30

400RA/407RA

300RAE/307RAEPage 31

400RAE/407RAE

330RA6Page 32

340RA6

320RA6Page 33

420RA6

3101RA6Page 34

4101RA6

4520RA/4620RA

Page 35

520RA

300RA(X)m

Page 36400RA(X)m/410RA(X)m

460RA(X)m

300RAE(X)mPage 37

400RAE(X)m/410RAE(X)m

HoRiZonTAl GRinDER inFoRmATion Page 38

Horizontal Grinders for Type 1 Wheels

400GH/407GHPage 40

507H

5201H

Page 4156H

65H

Horizontal Grinders for Cone Wheels

400GHPage 42

507H

400GHPage 43507H

520H

Horizontal Die Grinders (Collet output)

300EHPage 44

300GH

andy

Typewritten Text

Coming Soon!

andy

Typewritten Text

Coming Soon!

TABLE OF CONTENTS

400GHPage 45

507H

Geared Horizontal Polishers/Sanders

300GH(X)m/400GH(X)m

Page 46

500H1m

EXTEnDED GRinDER inFoRmATion Page 48

Extended Grinders for Burrs, mounted Stones & 3/8-24 Cone Wheels

400EH Page 50

Extended Grinders for Burrs, mounted Stones, 3/8-24 Cone Wheels 5/8-11 Cone Wheels & 4 inch Type 1 Wheels

400GEH/407GEH Page 51

Extended Grinders for 5/8-11 Cone Wheels & 6 inch Type 1 Wheels

520HGEH Page 52

65HGEH Page 53

65nEH Page 54

HoRiZonTAl DiE GRinDER inFoRmATion Page 56

Horizontal Die Grinders (Collet output)

300GE/307GEPage 58

300HGE/307HGE

400GEPage 59400HGE

400GT

Horizontal Die Grinders for Type 1, Type 1 Cut-off & Type 41 Wheels

400GTPage 60

407GT

Horizontal Die Grinders for 3/8-24 Cone Wheels

4ooGTCWPage 61

407GTCW

Geared Horizontal Die Grinders (Collet output)

300HGE(X)mPage 62

400HGE(X)m

Geared Horizontal Die Grinders for Surface Conditioning Abrasives

300GT(X)mPage 63

400GT(X)m

AiR DRillS inFoRmATion Page 64

300D(X)mPage 66

400D(X)m

400D(X)mPPage 67

500D2m

300DRA(X)m300DRAE(X)m

Page 68400DRA(X)m

400DRAE(X)m

400FD(X)mPage 69

500FD1m

BElT SAnDER

300Bl/K Page 70

BEnCH GRinDER

66BVG Page 71

ABRASiVE CuTTinG ToolS

65VBWPage 72

662VBW

SCAlERS, nEEDlE SCAlERS & CHiPPinG HAmmERSinFoRmATion

Page 74

Scalers

TC-1Page 75

TC-182

needle Scalers

TC-1Page 76

TC-182

Chipping Hammers

80Page 77

TC-183

moToRS inFoRmATion Page 78

300 Series Page 79

400 Series Page 80

500 SeriesPage 81

520 Series

664 Series Page 82

SAnDinG PADS Page 84

BuSHinGS, CollETS & ADAPTERS Page 85

GuARDS Page 86

mAinTEnAnCE ToolS Page 87

REPAiR KiTS Page 88-89

WARRAnTy Page 90

inDEX Page 91

WARNING: Follow all recommendations from component and abrasive manufacturers for speeds and proper usage.2

WARNING: Follow all recommendations from component and abrasive manufacturers for speeds and proper usage. 3

Work Safety

When care is taken to insure that the right tool is operated properly, and the safety and main-tenance procedures are followed, accidents may be avoided.

Read and understand tool manual before work starts to reduce risk of injury to operator, visitors, and tool. Many more guidelines are provided in the tool manual.

Users are responsible for following all estab-lished safety codes and regulations such as:• General Industry Safety & Health Regulations 29 CFR, Part 1910 and, where applicable, Construction Industry Safety & Health Regu-lations 29 CFR, Part 1929 available from the Superintendent of Documents, Government Printing Office, Washington, D.C. 20402

• Safety Requirements for the Use, Care and Protection of Abrasive Wheels – ANSI B7.1, available from American National Standards Institute, Inc., 1430 Broadway, New York, NY 10018

• Applicable State and Local Regulations.

Personal ProtectionDo not use while under the influence of drugs, alcohol or medication. Atten-tion is required to avoid accidents.Beware of loose hair and clothing so as not to become tangled or trapped during operation.Eye protection must be worn at all times to prevent particulates from causing eye injury. Eye protection shall conform to ANSI Z87.1.Ear protection is to be worn when exposure to sound exceeds the limits of applicable Federal, State or local statues, ordinances or regulations.Respiratory protection to be used when exposed to contaminants that exceed the applicable threshold limit values required by law.

The following suggestions will help reduce or moderate the effects of repetitive work motion and/or extended vibration exposure:

1) Do NOT over-grip the machine/tool. Use only the force required to maintain control.

2) Keep hands and body dry and warm. (Blood flow is important –exercise hands and arms as often as necessary).

3) Keep wrists as straight as possible. (AVOID hand positions that require the wrist to be flexed, hyper extended or turned side-to-side.

4) AVOID anything that may inhibit blood circulation such as smoking tobacco or

prolonged exposure to cold temperatures.5) Do NOT support body-weight on the tool

during operation.6) Maintain a stress-free posture for the entire

body.Prolonged exposure to vibrations created by vibrating sources may cause health hazards. There are gloves, handle wraps and other forms of protective measures available to help reduce the hazard. The fit and condition of any vibration abatement measure must be monitored.

Workplace SafetyPressurized air supply lines and flex-ible hoses can cause serious injury. Do not use damaged, frayed or dete-riorated air hoses and fittings.

The workplace should be clear of hazards and well lit. Dark, cluttered areas make injury more likelyKeep bystanders away while operating a tool. Be aware of the direction of sparks and other grinding and cutting debris.Make sure that the workpiece is well secured before working. A moving workpiece can cause tools to slip and lead to injury.

Grinder SafetyMachines, attachments and acces-sories must be used only for the purpose for which they were designed. Do not modify any part of any tool or accessory. Do not use any unapproved accessory.

All tools are designed for use with a pressure of 90 PSI (6.2 Bar) maximum. Excess pressure will cause speed to increase leading to a poten-tial unsafe operating speed.

Inspect the wheel guard for any signs of wear and that it is properly mounted to the tool. Any guard showing signs of wear such as bends, chips, nicks, or cracks shall be replaced.

Verify that the wheel flanges, wheel adapters and spindle threads are correct for the wheel type to be mounted. Only use recommended flanges and wheel adapters. Verify that the guard is correct for the wheel type to be mounted.Make sure that the tool is in good working or-der. For example, make sure handles are tight, the spindle bearings are solid—the spindle should not move in and out of the tool when pulled—the flanges are clean and free of nicks and the motor spindle spins freely.There are a few things that must be checked before using a wheel:• The rated speed of the grinding wheel and all accessories must equal or exceed the rated speed of the machine. Spinning items too fast may cause them to fail and result in injury.

• Inspect wheel for cracks or chips—if found, do not use. Cracks and chips weaken the wheel making a failure more prob-able

• Do not fit a wheel that has been soaked in or exposed to any liquids. Liquids may loosen the bonds of the wheel and lead to failure.

• Wheels without built in threads should fit on spindle but not loose. Loose wheels may be greatly out of balance and cause undue stress on the wheel leading to failure.

• Wheels should be uniform and balanced. Out of balance wheels increase the stress in the wheel and may lead to injury.

• Follow the proper handling and storage of abrasive wheels and inserted tooling as described in ANSI B7.1.

The spindle speed of the tool must be checked. This measured speed shall always be less than the rated speed of the tool. If the tool’s speed measures higher than its rated speed it shall be removed from use and corrected before being returned to use.

• Verify that the air line pressure is 90 PSI (6.2 Bar) maximum. Excess pressure will cause speed to increase leading to a potential unsafe operating speed.

• Several speed readings should be taken with the tool being turned on and off between readings. More tests make sure that the tool is reliably reaching the same speed.

• Tachometers must be checked and calibrated on a regular basis according to the manufac-turer's recommendations. Precise numbers can only be arrived at by accurate equipment.

• This form of inspection should be made with the grinding wheel or other tooling removed.

• Measure the speed of grinders every 20 hours of actual use or once per week, whichever comes first.

• Measure the speed of grinders after mainte-nance or repair, whenever a grinder is issued from the tool crib and at each wheel change.

• Test a wheel by running the tool under a bench and away from bystanders.

• Run for a minimum of one minute.• Turn the tool on and off several times.

• This test should be performed any time a wheel may have been pinched, dropped, when the tool is issued or when first using the tool for the day.

AvoidAvoidoK oK AvoidAvoid

INSP

ECT WHEELS

TO

OL INSPECTIO

N


Es posible evitar accidentes cuando se tiene cuidado de usar la herramienta correcta de forma adecuada, y se siguen los procedimien-tos de seguridad y mantenimiento.

Lea y comprenda el manual de la herramienta antes de comenzar a trabajar para reducir el riesgo de lesiones al operario, a los visitantes y a la herramienta. En el manual de la herramienta se proporciona mas información.

Los usuarios son responsables de seguir todos los códigos y normativas de seguridad estab-lecidos, como son:• La normativa de seguridad y salud en la industria general (29 CFR, Parte 1910) y, donde corresponda, la normativa de seguridad y salud en la industria de la construcción (29 CFR, Parte 1929) disponibles en Superin-tendent of Documents, Government Printing Office, Washington, D.C. 20402 • Los requisitos de seguridad para el Uso, el cuidado y la protección de ruedas abrasivas (ANSI B7.1), disponible en American National Standards Institute, Inc., 1430 Broadway, Nueva York, NY 10018 • Las normativas estatales y locales corre-spondientes. Protección personal

No utilizar mientras si ha consumido drogas, alcohol o medicamentos. Se requiere atención para evitar acciden-tes. Tenga cuidado con el cabello y la ropa suelta para que no se llegue a enredar o quedar atrapada durante la operación. Debe usar protectores para los ojos en todo momento para evitar que las partículas causen daños a los ojos. Los protectores de ojos deben ajustarse a la norma ANSI Z87.1. Debe usar protectores para los oídos cuando la exposición a los ruidos excede los límites de los estatutos, ordenanzas o normativas federales, estatales o locales correspondientes. Debe usar protección respiratoria cu-ando se expone a contaminantes que excedan los valores límite que exigen las leyes correspondientes.

Las siguientes sugerencias le ayudarán a reducir o moderar los efectos del movimiento repetitivo en el trabajo y/o la exposición pro-longada a la vibración:

1) NO agarre la máquina o herramienta con de-masiada fuerza. Aplique únicamente la fuerza necesaria para mantener el control. 2) Mantenga las manos y el cuerpo secos y cálidos. (El flujo sanguíneo es importante; ejercite las manos y los brazos tan a menudo como sea necesario). 3) Mantenga las muñecas tan rectas como sea posible. (EVITE las posiciones de mano que requieren que la muñeca esté doblada, híper extendida o girada de lado a lado.) 4) EVITE cualquier cosa que pueda inhibir el flujo sanguíneo como son fumar tabaco o la

exposición prolongada a temperaturas frías. 5) NO apoye el peso corporal en la herramienta durante la operación. 6) Mantenga una postura relajada para el cuerpo entero.La exposición prolongada a las vibraciones creadas por fuentes vibratorias puede causar un riesgo para la salud. Hay guantes, cubi-ertas de asidero y otras formas de medidas protectoras disponibles para ayudar a reducir el riesgo. Debe vigilar el ajuste y la condición de cualquier medida para la disminución de vibración.Seguridad en el lugar de trabajo

Las líneas de suministro neumático presurizadas y las mangueras flexibles pueden causar heridas graves. No utilice mangueras y accesorios neumáticos dañados, deshilachados o deteriorados.

El lugar de trabajo debe estar libre de riesgos y bien iluminado. Las áreas oscuras y atestadas aumentan las probabilidades de heridas. Aleje a los espectadores mientras opera una herramienta. Preste atención a la dirección de las chispas y otros residuos que se producen al moler y cortar. Asegúrese de que la pieza de trabajo esté bien asegurada antes de trabajar. Una pieza de trabajo móvil puede hacer que la herramienta resbale y conducir a heridas. Seguridad en el Pulido

Las máquinas, los aditamentos y los accesorios deben ser utilizados únicamente para el propósito para los que fueron diseñados. No modifique ninguna parte de alguna herramienta o accesorio. No utilice

un accesorio que no ha sido previamente aprobado. Todas las herramientas están diseñadas para usarse a una presión máxima de 90 psi (6.2 Bar). Un exceso en la presión hará que aumente la velocidad, lo cual llevará a una ve-locidad de operación potencialmente peligrosa.

Inspeccione el guarda de la rueda en cuanto a señales de desgaste y que esté correctamente instalada en la herramienta. La guarda que muestre señas de desgaste como dobleces, despostillamientos, mellas o grietas debe ser reem-plazada.

Verifique que las bridas de rueda, los adapta-dores de rueda y la rosca del eje sean los cor-rectos para el tipo de rueda que se instalará. Utilice únicamente las bridas y los adaptadores de rueda recomendados. Verifique que la guarda sea la correcta para el tipo de rueda que se instalará. Compruebe que la herramienta esté funciona-ndo. Por ejemplo, compruebe que los asideros están apretados y los cojinetes de eje están sólidos; que el eje no entre y salga de la her-ramienta cuando se jala; que las bridas estén limpias y sin mellas y que el eje del motor gire libremente.Hay algunas cosas que debe revisar antes de utilizar una rueda: • La velocidad nominal de la rueda de amolar y todos los accesorios debe ser igual o mayor a la velocidad nominal de la máquina. Si los artículos giran demasiado rápido pueden fallar

y resultar en lesiones. • Inspeccione la rueda en cuanto a grietas o despostillamientos; si encuentra algo, no la utilice. Las grietas y despostillamientos debili-tan la rueda haciendo que sea más probable que falle.

• No coloque una rueda que ha sido sumergida o expuesta a algún líquido. Los líquidos pueden aflojar el vínculo de la rueda y conducir a fallas. • Las ruedas que no tienen rosca deben quedar en el eje pero no quedar sueltas. Las ruedas flojas pueden estar muy desequilibradas y cau-sar una tensión excesiva en la rueda, haciendo que falle. • Las ruedas deben ser uniformes y equilibra-das. Las ruedas desequilibradas aumentan la tensión en la rueda y pueden llevar a lesiones. • Siga el manejo y almacenamiento adecuados de las ruedas abrasivas y de las herramientas instaladas, como se describe en la norma ANSI B7.1.

La velocidad del eje de la her-ramienta debe ser verificada. La velocidad medida siempre debe ser menor que la velocidad nominal de la herramienta. Si la velocidad de la herramienta resulta más alta que la velocidad nominal, debe eliminar del uso y corregir el problema antes de que se utilice de nuevo.

• Verifique que la presión máxima de la línea neumática sea de 90 psi (6.2 Bar). Un exceso en la presión hará que aumente la velocidad, lo cual llevará a una velocidad de operación potencialmente peligrosa. • Debe tomar varias lecturas de la velocidad con la herramienta, encendiendo y apagando la herramienta entre lecturas. Las pruebas adi-cionales aseguran que la herramienta alcance la misma velocidad de forma confiable. • Los tacómetros deben ser verificados y calibrados con regularidad según las recomen-daciones del fabricante. Únicamente se pueden lograr números precisos con un equipo exacto. • Realice esta forma de inspección quitando primero la rueda de amolar u otros accesorios. • Mida la velocidad de los moledores cada 20 horas de uso real o una vez a la semana, lo que sea primero. • Mida la velocidad de los moledores después de un mantenimiento o reparación, siempre que saque un moledor de la bodega de herra-mienta o cuando se instale un moledor nuevo.

• Pruebe una rueda haciendo fun-cionar la herramienta debajo de un banco y lejos de los espectadores. • Déjela encendida al menos durante un minuto. • Encienda y apague la herramien-ta varias veces. • Realice esta prueba siempre que comprima o deje caer una rueda, cuando utilice la herramienta por primera vez o cuando utilice la herramienta por primera vez en el día.

TO

OL INSPECTIO

N

INSP

ECT WHEELS

Seguridad laboral



Quand on prend soin de s'assurer que le bon outil est utilisé correctement, et que les procé-dures de sécurité et d'entretien sont respec-tées, les accidents peuvent être évités.

Lire et comprendre le manuel de l'outil avant le début des travaux pour réduire le risque de blessures pour l'opérateur, les visiteurs, et l’endommagement de l'outil. Beau-coup plus de conseils sont fournis dans le manuel de l'outil.

Les utilisateurs sont tenus de suivre tous les codes de sécurité et les règlements établis tels que:• General Industry Safety & Health Regulations 29 CFR, Partie 1910 et, le cas échéant, Con-struction Industry Safety & Health Regula-tions 29 CFR, Partie 1929, disponible auprès du Superintendent of Documents, Govern-ment Printing Office, Washington, D.C. 20402

• Safety Requirements for the Use, Care and Protection of Abrasive Wheels – ANSI B7.1, disponible auprès de American National Stan-dards Institute, Inc., 1430 Broadway, New York, NY 10018

• Règlements locaux et d’État applicables.Protection individuelle

Ne pas utiliser sous l'influence de drogues, d'alcool ou de médicaments. L'attention est nécessaire pour éviter les accidents.Méfiez-vous des cheveux et des vêtements trop lâches afin de ne pas vous emmêler ou être piégé pendant le fonctionnement.Une protection des yeux doit être por-tée en tout temps pour empêcher les particules de causer des blessures aux yeux. La protection des yeux doivent être conformes à la norme ANSI Z87.1.Une protection auditive doit être portée lors de l'exposition au bruit dépassant les limites des statuts, or-donnances ou règlements applicables au niveau fédéral, provincial ou local.Une protection respiratoire doit être utilisée en cas d'exposition à des contaminants qui dépassent les val-eurs limites d'exposition applicables prévues par la loi.

Les suggestions suivantes vous permettront de réduire ou d'atténuer les effets du mouve-ment de tâches répétitives et / ou l'exposition aux vibrations prolongées:

1) NE PAS tenir trop fermement la machine ou l’outil. Utilisez juste la force nécessaire pour maintenir le contrôle.

2) Garder les mains et le corps sec et chaud. (La circulation du sang est importante - relaxez les mains et les bras aussi souvent que nécessaire).

3) Gardez les poignets aussi droits que pos-sible. (ÉVITER les positions de main qui nécessitent le pliement et une tension exces-sive du poignet ou le fait de le tourner d’un côté ou de l’autre.

4) ÉVITER tout ce qui peut entraver la cir-culation du sang tel que le tabagisme ou l'exposition prolongée à des températures

froides.5) NE PAS mettre le poids de votre corps sur

l'outil pendant l'opération.6) Maintenir une posture sans stress pour le

corps tout entier.Une exposition prolongée aux vibrations créées par des sources de vibration peut provoquer des dangers pour la santé. Il y a des gants, des enveloppements de poignées et d'autres formes de mesures de protection disponibles pour aider à réduire les risques. L'ajustement et la condition de toute mesure de réduction de vibration doivent être surveillés.Sécurité du lieu de travail

Les conduites d'air sous pression et les tuyaux flexibles peuvent causer des blessures graves. Ne pas utiliser de tuyaux d'air et de raccords endom-magés, effilochés ou détériorés.

Le lieu de travail doit être débarrassé de tout risque et bien éclairé. Les zones sombres et encombrées représentent une possibilité plus grande de blessures.Éloignez les passants lorsqu'on utilise un outil. Soyez conscient de la direction des étincelles et autres débris de meulage et de coupe.Assurez-vous que la pièce est bien fixée avant de travailler. Une pièce en mouvement peut causer le glissement des outils et provoquer des blessures.Sécurité concernant les meules

Les machines, équipements et acces-soires doivent être utilisés unique-ment aux fins pour lesquelles ils ont été conçus. Ne modifier aucune partie de n'importe quel outil ou accessoire. N’utiliser aucun accessoire non ap-prouvé.

Tous les outils sont conçus pour une utilisa-tion sous une pression de 90 psi (6,2 bar) au maximum. Une pression excessive provoque une augmentation de la vitesse, ce qui entraîne une vitesse de fonctionnement potentiellement dangereuse.

Inspecter le carter de protection de la meule pour détecter tout signe d'usure et pour voir s'il est correctement monté sur l'outil. Tout carter de protection mon-trant des signes d'usure tels que coudes, écaillures, entailles ou fissures doit être remplacé.

Vérifiez que les brides des meules, adaptateurs de meules et filetages de l’axe du moteur sont corrects pour le type de meule qui doit être montée. N'utilisez que les brides et adapta-teurs de meule recommandés. Vérifiez que le dispositif de protection est correct pour le type de meule à monter.Assurez-vous que l'outil est en bon état de fonctionnement. Par exemple, assurez-vous que les poignées sont bien serrées, que les roulements de l’arbre du moteur sont solides: l’axe ne doit pas se déplacer vers l’intérieur ou l’extérieur de l'outil lorsqu'il est tiré, les brides doivent être propres et exempts d'entailles et l'axe du moteur doit tourner librement.Il y a certaines choses qui doivent être vérifiées avant d'utiliser une meule:• La vitesse nominale de la meule et tous les accessoires doivent égaler ou dépasser la vitesse nominale de la machine. Faire tourner des pièces trop rapidement peut les faire rater et entraîner des blessures.

• Inspecter la meule pour voir si elle a des fissures ou des copeaux, si vous en trouvez, ne l’utilisez pas. Les fissures et les écaillures affaiblissent la meule, ce qui rend plus probable le ratage de la pièce

• Ne montez pas une meule qui a été trempée dans un liquide ou exposé à un liquide. Les liquides peuvent relâcher les liens de la meule et conduire à l'échec.

• Les meules sans filetage incorporé doivent tenir sur l’axe mais sans être lâche. Les meules libres peuvent être fortement dé-séquilibrées et causer un stress excessif sur la meule, ce qui conduit à l'échec.

• Les meules doivent être uniformes et équili-brées. Une meule déséquilibrée augmente le stress dans la meule et peut entraîner des blessures.

• Suivre la manutention et l'entreposage des meules abrasives et des outils qui y sont attachés tel que cela est décrit dans la norme ANSI B7.1.

La vitesse de l’axe de l'outil doit être vérifiée. Cette vitesse mesurée est toujours inférieure à la vitesse nominale de l'outil. Si la vitesse de l'outil est supérieure à sa vitesse nominale il doit être retiré de l'utilisation et corrigé avant d'être réutilisé.

• Assurez-vous que la pression de la conduite d'air est de 90 PSI (6,2 bar) maximum. Une pression excessive provoque une augmen-tation de la vitesse, ce qui conduit à une vitesse de fonctionnement potentiellement dangereux.

• Plusieurs lectures de vitesse doivent être prises alors que l'outil est allumé et éteint en-tre les lectures. D'autres tests permettent de s’assurer que l'outil est fiable pour atteindre la même vitesse.

• Les compte-tours doivent être vérifiés et étalonnés régulièrement, conformément aux recommandations du fabricant. Les chiffres précis ne peuvent être obtenu qu’avec des équipements précis.

• Ce formulaire d'inspection doit être effectué avec la meule ou autre outillage retiré.

• Mesurer la vitesse des meules toutes les 20 heures d'utilisation réelle ou une fois par semaine, selon ce qui se produit en premier.

• Mesurer la vitesse des meules après un en-tretien ou une réparation, chaque fois qu'une meule sort de l'armoire à outils et à chaque changement de roue.

• Tester une meule en exécutant l'outil sous un établi et à l'abri des passants.

• faire tourner la meule pendant un minimum d'une minute.

• Mettez en marche et arrêtez la meule plusieurs fois.

• Ce test doit être effectué chaque fois qu'une meule a été pincée, est tombée, lorsque l'outil est délivré ou lors de la première utilisation de l'outil pour la journée.


INSP

ECT WHEELS

TO

OL INSPECTIO

N

Conseils de sécurité


Vertical Tools

INFORMATION PAGE

Page number Application Abrasive Size model

Series Power output mounting of Abrasives

7 Type 27, Type 27 Cut-Off (Type 42) & 28 Depressed Center Wheels

7 Inch (180 mm) 520V 2 H.P. (1.5 kW)

7 Inch (180 mm)54V 3 H.P. (2.3 kW)

9 Inch (230 mm)

87 Inch (180 mm)

64V 4 H.P. (3.0 kW)9 Inch (230 mm)

9 Inch (230 mm) 727V 4.3 H.P. (3.2 kW)

9Type 11 Cup Wheels

4 Inch (100 mm) 520V 2 H.P. (1.5 kW)

4 Inch (100 mm)58C 3 H.P. (2.3 kW)

6 Inch (150 mm)

106 Inch (150 mm) 68C 4 H.P. (3.0 kW)

6 Inch (150 mm) 711C 4.3 H.P. (3.2 kW)

11

Type 1 Cut-Off (Type 41) Bondedor Diamond Wheels

8 Inch(200 mm) 56PC 3 H.P. (2.3 kW)

10 Inch(250 mm)

66PC 4 H.P. (3.0 kW)12 Inch(300 mm)

14 Inch(350 mm)

12

Surface Conditioning orSanding Abrasives 7 Inch

(180 mm)

520V 2 H.P. (1.5 kW)

56S 3 H.P. (2.3 kW)

9 Inch(230 mm) 56S 3 H.P. (2.3 kW)

Wheel

Wheel SafetyGuard

Wheel SafetyGuard

WheelSafety Guard

Wheel Safety Retainer*

*The use of Wheel Safety Retainers is highly recom-mended with cup wheels.

Inner Wheel Flange

Inner Wheel Flange

Outer Wheel Flange

Outer Wheel Flange

Wheel Nut

Wheel Nut

Wheel

Wheel

8" or 10" Size Wheels

12" or 14" Size Wheels

AdapterWheel Safety Guard

Adapter NutWheel CP-51

CP-52

Type 27 Wheel w/o Hub

Type 27 Wheelwith Built-in

Adapter

Type 27 Wheelwithout Built-in

Adapter

Reinforced/BondedCut-off Wheels

Diamond Plated/Segmented Wheels

Flap Wheels, Sand Paper or Scotch® Discs

Type 11 Wheel

Cup Wheel Maximum Height is 2.0 inches (50mm).

SPEED/GUARD SIZE SELECTIONThe rated speed and guard size are closely linked to promote safety and maximize efficiency of the grind-ing operation. Each model offers various options that are specific to the size/type of the abrasive.

MOUNTING OF ABRASIVESEach wheel type mounts onto the tool in a specific way. Please consult the diagrams above for details on how your particular wheel mounts onto the tool. More details on the mounting of wheels can be found in ANSI B7.1 and ANSI B186.1. Mounting wheels in ways other than those shown are non-compliant and may lead to injury.

HANDLES Several different handle styles are offered on our vertical tools. Pictured below are each in detail.

(L) Regular Lever (K) Safety Lever

Safety Lever Latch

(B) Thumb Switch

Abrasive Disc

Backing Pad

Sanding Pad Nut

VERT

ICAL

TOO

LS


6.9 Inch(175 mm)

7.7 Inch(196 mm)

Vertical Grinders for use with Type 27, Type 27 Cut-Off (Type 42) & 28 Depressed Center Wheels

7 Inch • 9 Inch Diameter Wheels (180 mm) (230 mm)

520V Series 54V Series

54VK;6000;927520VK;8000;727

STANDARD EQUIPMENT• Tool • operating instructions and Service manual • Wrenches (sizes based on options)

ALTERNATE OPTIONS

Type 27 or Type 27 Cut-Off (Type 42)The depressed center wheel adapters are not sup-

plied as standard equipment with the tools. If you are using a wheel that requires the adapters,

they must be purchased separately.

WHEEL MOUNTING

Handles

The tools above can be rated at speeds slower than 8000 RPM

when used with a 7 Inch (180 mm) wheel.

Operating Speed

Wheel Size operating Speed lever Style moDEl numBER Wheel Size operating Speed lever Style moDEl numBER

7 Inch(180 mm) 8000 RPM

Standard Lever 520Vl;8000;727 7 Inch(180 mm) 8000 RPM

Standard Lever 54Vl;8000;727

Safety Lever 520VK;8000;727 Safety Lever 54VK;8000;727

9 Inch(230 mm) 6000 RPM


Safety Lever 54VK;6000;927

Depressed CenterType 27 Wheel

Depressed Center Type 27 Cut-Off (Type 42) Wheel

3.0 H.P. (2.3 kW)

25 cfm (18.8 L/s) Free Speed60 cfm (28.3 L/s) Max

9.8 Lbs.(4.4 Kg)

1/2" NPT Inlet1/2" (13 mm) Hose Size

2.0 H.P. (1.5 kW)


7.4 Lbs.(3.3 Kg)


Thumb Switch

Safety Lever

Standard Lever

Piped Away Exhaust Available to Reduce Sound Emissions.

VERTICAL TOOLS


Thumb Switch

Safety Lever

Standard Lever

Vertical Grinders for use with Type 27, Type 27 Cut-Off (Type 42) & 28 Depressed Center Wheels


727V Series64V Series

64VK;6000;927 727VK;6000;927


ALTERNATE OPTIONS

Type 27 or Type 27 Cut-Off (Type 42)The depressed center wheel adapters are not sup-

plied as standard equipment with the tools. If you are using a wheel that requires the adapters,

they must be purchased separately.

WHEEL MOUNTING

Handles

The tools above can be rated at speeds slower than 8000 RPM

when used with a 7 Inch (180 mm) wheel.

Operating Speed


7 Inch(180 mm) 8000 RPM


Safety Lever 64VK;8000;727

9 Inch(230 mm) 6000 RPM



Safety Lever 64VK;6000;927 Safety Lever 727VK;6000;927


Depressed Center Type 27 Cut-Off (Type 42) Wheel

8.1 Inch(206 mm)

4.3 H.P. (3.2 kW)


12.8 Lbs.(5.8 Kg)


4.0 H.P. (3.0 kW)


11.3 Lbs.(5.1 Kg)


7.4 Inch(188 mm)


VERT

ICAL

TOO

LS

andy

Typewritten Text

Coming Soon!


Thumb Switch

Safety Lever

Standard Lever

6.9 Inch(175 mm)

7.7 Inch(196 mm)



520V Series 58C Series

58CK;6000;611520VK;8000;411

Type 11 Wheel


ALTERNATE OPTIONS

Type 11 Wheel

WHEEL MOUNTING

Handles

Versions are Available on Model 58C for use with

5 Inch (125 mm) Wheels.

Wheel Size


4 Inch(100 mm) 8000 RPM


Standard Lever 58Cl;8000;411

Safety Lever 520VK;8000;411 Safety Lever 58CK;8000;411

6 Inch(150 mm) 6000 RPM


Safety Lever 58CK;6000;611

3.0 H.P. (2.3 kW)


10.3 Lbs.(4.7 Kg)


2.0 H.P. (1.5 kW)


7.5 Lbs.(3.4 Kg)



VERTICAL TOOLS


8.1 Inch(206 mm)

4.3 H.P. (3.2 kW)


13.3 Lbs.(6.0 Kg)


711C Series

711CK;6000;611

Thumb Switch

Safety Lever

Standard Lever

7.4 Inch(188 mm)



68C Series

68CK;6000;611

Type 11 Wheel


ALTERNATE OPTIONS

Type 11 Wheel

WHEEL MOUNTING

Handles

Versions are Available on Model 68C for use with

5 Inch (125 mm) Wheels.

Wheel Size


6 Inch(150 mm) 6000 RPM

Standard Lever 68Cl;6000;611 6 Inch(150 mm) 6000 RPM


Safety Lever 68CK;6000;611 Safety Lever 711CK;6000;611

4.0 H.P. (3.0 kW)


11.8 Lbs.(5.3 Kg)



VERT

ICAL

TOO

LS

andy

Typewritten Text

Coming Soon!


Thumb Switch

Safety Lever

Standard Lever

7.6 Inch(193 mm)

Pile Cutters for use with Bonded Type 1 Cut-off (Type 41) or Diamond Wheels

8 Inch • 10 Inch • 12 Inch • 14 Inch Diameter Wheels (200 mm) (250 mm) (300 mm) (350 mm)

56PC Series 66PC Series

66PCK;4000;144156PCK;6000;841

Type 1 Cut-off (Type 41) Wheel


ALTERNATE OPTIONS

7.2 Inch(183 mm)

WHEEL MOUNTING

Handles


8 Inch X 5/8 ID(200 mm) 6000 RPM

Standard Lever 56PCl;6000;841

Safety Lever 56PCK;6000;841

10 Inch X 5/8 ID(250 mm) 6000 RPM



12 Inch X 1.0 ID(300 mm) 5000 RPM



14 Inch X 1.0 ID(350 mm) 4000 RPM



3.0 H.P.(2.3 kW)


11.3 Lbs.(5.1 Kg)


4.0 H.P. (3.0 kW)


15.8 Lbs.(7.2 Kg)


VERTICAL TOOLS


Thumb Switch

Safety Lever

Standard Lever

Vertical Sanders for use with Surface Conditioning Abrasives

7 Inch • 9 Inch Sanding Abrasives (180 mm) (230 mm)

520V Series 56S Series

56SK;6000;7SP520VK;8000;7SP


ALTERNATE OPTIONS

Sanding Disc

ABRASIVE MOUNTING

Handles


7 Inch (180 mm)

6000 RPMStandard Lever 520Vl;6000;7SP

7 Inch (180 mm)

6000 RPMStandard Lever 56Sl;6000;7SP

Safety Lever 520VK;6000;7SP Safety Lever 56SK;6000;7SP

8000 RPMStandard Lever 520Vl;8000;7SP

8000 RPMStandard Lever 56Sl;8000;7SP

Safety Lever 520VK;8000;7SP Safety Lever 56SK;8000;7SP

9 Inch (230 mm) 6000 RPM

Standard Lever 56Sl;6000;9SP

Safety Lever 56SK;6000;9SP

7.7 Inch(196 mm)

2.0 H.P.(1.5 kW)


6.8 Lbs. (3.1 Kg)


6.9 Inch(175 mm)

3.0 H.P. (2.3 kW)


8.8 Lbs.(4.0 Kg)


VERT

ICAL

TOO

LS


VERTICAL TOOLS


Rear exhaust overhose for the 300 Series

Only available on Rear Exhaust tools.



Right Angle Grinding & Cutting Tools

INFORMATION PAGE

Application Page number Tool Configuration Abrasive

Size model Series Power output

16• Large Bearing &

Gears for High Duty Cycle & Longevity

4 Inch(100 mm)

300RA 0.7 H.P. (600 W)

400RA 1.2 H.P. (900 W)

4 1/2 Inch(115 mm)

300RA 0.7 H.P. (600 W)

400RA 1.2 H.P. (900 W)5 Inch(125 mm)

17• Large Bearing &

Gears for High Duty Cycle & Longevity

• Extended Neck

4 Inch(100 mm)

300RAE 0.7 H.P. (600 W)

400RAE 1.2 H.P. (900 W)

4 1/2 Inch(115 mm)

300RAE 0.7 H.P. (600 W)

400RAE 1.2 H.P. (900 W)5 Inch

(125 mm)

6 Inch(150 mm)

18• Small Head

for Restricted Applications

• Extended Neck

4 Inch(100 mm)

320RA 0.7 H.P. (600 W)

420RA 1.2 H.P. (900 W)

7 Inch(180 mm)

520RA 2.0 H.P. (1.5 kW)19• Large Head

for Larger Size Abrasives

9 Inch(230 mm)

10 Inch(250 mm)

Type 27Depressed Center Wheels

Type 1 Cut-off (Type 41) Bonded Wheels

Extended Neck vs StandardExtended neck tools allow the operator to reach further into the workpiece. This extended reach coupled with the small heads found on TopCat tools can allow fine finishing in the tightest of areas. Furthermore, the extended neck tools can be fitted with larger diameter abrasivesallowing for more efficient material removal and better, more consistent surface finishes.

Standard Style Right Angle Grinder

Extended Neck Right Angle Grinder

EXHAUST DIRECTIONLEVER STYLE CASE MATERIAL

Safety Lever

Aluminum Case Material

Steel Case Material

Standard Lever

Rear Exhaust

Side Exhaust

The choice of case material affects the weight and durability of the tool. By it's nature, aluminum is lighter in weight than steel. Steel is more durable in aggressive environments.

RIGH

T AN

GLE

GRIN

DERS


3/8-24 x 1.0 inchSpindle



output Thread Size & length

Popular Wheel Sizes & Type

• 4 Inch Type 27 and Type 27 Cut-Off (Type 42)

• 4 Inch Type 1 Cut-off (Type 41)

• 4 1/2 Inch Type 27 and Type 27 Cut-Off (Type 42)

• 4 1/2 Inch Type 1 Cut-Off (Type 41)4" Type 1 Cut-Off (Type 41)

optional Wheel Sizes & Type

• 4 1/2 Inch Type 27 and Type 27 Cut-Off (Type 42)

• 4 1/2 Inch Type 1 Cut-Off (Type 41)• 5 Inch Type 27 and Type 27

Cut-Off (Type 42)• 5 Inch Type 1 Cut-off (Type 41)• 6 Inch Type 1 Cut-off (Type 41)

• 5 Inch Type 27 and Type 27 Cut-Off (Type 42)

• 5 Inch Type 1 Cut-off (Type 41)• 6 Inch Type 1 Cut-off (Type 41)

Right Angle Grinding & Cutting Tools

INFORMATION PAGE

Wheel Mounting for Right Angle Grinders

520RA Type 1 Cut-off (Type 41) Wheels

Wheel Safety Guard

Inner Flange

Outer Flange

Wheel

Flange Nut

520RAType 27 and 42Wheels

Wheel Safety Guard

Adapter

WheelAdapter Nut

Type 27 and 42 Wheels with 3/8" iD mounting Hole

Type 27 and 42 Wheels with 5/8" or 7/8" iD mounting

Adapter Set number Spindle Size

490-KR 3/8-24 x 0.6 Inch490-K 3/8-24 x 1.0 Inch

Type 1 Cut-off (Type 42) Wheels

Part number Spindle Size Wheel mounting Hole

400-G-423/8-24

4" or Smaller1100-682

4-1/2" or Larger1100-680 5/8-11

Ordered as individual parts

Type 27 WheelsType 27 Cut-Off (Type 42)

These Adapters can be used to mount either Type 27, Type 27 Cut-off (Type 42) or Type 1 Cut-off (Type 41) wheels

Type 1 Cut-off (Type 41) Wheels

Part number Spindle Size Wheel mounting Hole

ADT27-3543/8-24

5/8"ADT27-375

7/8"ADT27-575 5/8-11

Ordered as individual parts

Wheel Safety GuardAdapter

WheelAdapter Nut

Wheel Safety GuardWheel Flange

WheelFlange Nut

Wheel Safety GuardAdapter

WheelAdapter

RIGHT ANGLE GRINDERS


Type 27 or Type 27 Cut-Off (Type 42) Wheel


Wheel Mounting

7.4 Inch(189 mm)

3.0 Inch(76 mm)

1.5 Inch(37 mm)

7.1 Inch(188 mm)

3.0 Inch(76 mm)

1.6 Inch(41 mm)

Short Right Angle Grinders for Type 27, Type 27 Cut-Off (Type 42) & Type 1 Cut-Off (Type 41) Wheels

4 Inch • 4 1/2 Inch (100 mm) (115 mm)

300RA Series 400RA Series

400RA2SK;10000;4527400RA2RS;10000;4527300RA4K;15000;427

Safety LeverSafety Lever

Standard Lever

Side Exhaust

Rear ExhaustRear Exhaust (only)

Steel CaseSteel Case

300RA Alternate Options 400RA Alternate Options

Versions are Available for use with 5 Inch (125 mm) Wheels.

Wheel Size


Wheel Size Exhaust Direction lever Style

moDEl numBERWheel Size Exhaust

Direction lever StylemoDEl numBER

Type 27 Wheels (Type 42)

Type 1 or Type 1 Cut-off Wheels (Type 41)

Type 27 Wheels (Type 42)

Type 1 or Type 1 Cut-off Wheels (Type 41)

4 Inch(100 mm)

Rear

Standard Lever 300RA4;15000;427 300RA4;15000;441

Safety Lever 300RA4K;15000;427 300RA4K;15000;441

4 1/2 Inch(115 mm)

Standard Lever 300RA2;13000;4527 300RA2;13000;4541

4 1/2 Inch(115 mm)

SideStandard Lever 400RA2S;10000;4527 400RA2S;10000;4541

Safety Lever 300RA2K;13000;4527 300RA2K;13000;4541 Safety Lever 400RA2SK;10000;4527 400RA2SK;10000;4541

RearStandard Lever 400RA2RS;10000;4527 400RA2RS;10000;4541

Safety Lever 400RA2RSK;10000;4527 400RA2RSK;10000;4541

0.7 H.P.(600 W)

25 cfm (11.8 L/s) Max

2.8 Lbs. (1.3 Kg) Aluminum3.2 Lbs. (1.5 Kg) Steel


1.2 H.P.(900 W)

35 cfm (16.5 L/s) Max


3/8” NPT Inlet1/2” (13 mm) Hose Size


Type 1 Cut-Off (Type 41) Wheel


Aluminum Case

SteelCase

Case Material

Aluminum Case

SteelCase

Case Material

RIGH

T AN

GLE

GRIN

DERS




Extended Right Angle Grinders for Type 27, Type 27 Cut-Off (Type 42) & Type 1 Cut-Off (Type 41) Wheels

4 Inch • 4 1/2 Inch • 6 Inch (100 mm) (115 mm) (150 mm)

300RAE Series 400RAE Series

400RAE2S;10000;4527 400RAE2SRK;10000;641300RAE2;13000;4527

Safety Lever

Standard Lever Standard Lever

Side Exhaust

Side Exhaust

Rear Exhaust

Steel Case

Steel Case

10.4 Inch(264 mm)

4.7 Inch(119 mm)

3.0 Inch(76 mm)

1.5 Inch(37 mm)

4.8 Inch(123 mm)

11.0 Inch(279 mm)

3.0 Inch(76 mm)

1.6 Inch(41 mm)




300RAE Alternate Options 400RAE Alternate Options Wheel Mounting

Versions are Available for use with 5 Inch (125 mm) Wheels.

Wheel Size


Wheel Size

Exhaust Direction lever Style

moDEl numBERWheel Size


moDEl numBERType 27 Wheels

(Type 42)Type 1 or Type 1 Cut-off

Wheels (Type 41)Type 27 Wheels


Wheels (Type 41)

4 Inch(100 mm)

SideStandard Lever 300RAE4;15000;427 300RAE4;15000;441

Safety Lever 300RAE4K;15000;427 300RAE4K;15000;441

RearStandard Lever 300RAE4R;15000;427 300RAE4R;15000;441

Safety Lever 300RAE4RK;15000;427 300RAE4RK;15000;441

4 1/2 Inch(115 mm)

SideStandard Lever 300RAE2;13000;4527 300RAE2;13000;4541

4 1/2 Inch(115 mm)

SideStandard Lever 400RAE2S;10000;4527 400RAE2S;10000;4541

Safety Lever 300RAE2K;13000;4527 300RAE2K;13000;4541 Safety Lever 400RAE2SK;10000;4527 400RAE2SK;10000;4541

RearStandard Lever 300RAE2R;13000;4527 300RAE2R;13000;4541

RearStandard Lever 400RAE2SR;10000;4527 400RAE2SR;10000;4541

Safety Lever 300RAE2RK;13000;4527 300RAE2RK;13000;4541 Safety Lever 400RAE2SRK;10000;4527 400RAE2SRK;10000;4541

6 Inch(150 mm) Cut-Off

Only

SideStandard Lever 400RAE2S;10000;641

Safety Lever 400RAE2SK;10000;641

RearStandard Lever 400RAE2SR;10000;641

Safety Lever 400RAE2SRK;10000;641

0.7 H.P.(600 W)

25 cfm (11.8 L/s) Max



1.2 H.P.(900 W)

35 cfm (16.5 L/s) Max



Aluminum Case

SteelCase

Case Material

Aluminum Case

SteelCase

Case Material





Wheel Mounting

10.1 Inch(257 mm)

4.3 Inch(110 mm)

2.3 Inch(59 mm)

1.5 Inch(37 mm)

9.8 Inch(249 mm)

4.5 Inch(113 mm)

2.3 Inch(59 mm)

1.6 Inch(41 mm)

Extended Right Angle Grinders with Small Heads for Type 27 Depressed Center & Type 1 Cut-Off (Type 41) Wheels

4 Inch (100 mm)


420RA4SK;13000;441420RA4RS;13000;427320RA4K;15000;441


Standard Lever Side Exhaust

Side Exhaust

Rear Exhaust

Steel Case Steel Case

320RA Alternate Options 420RA Alternate OptionsSTANDARD EQUIPMENT• Tool • operating instructions and Service manual • Wrenches (sizes based on options)

Wheel Size


moDEl numBERWheel Size




Wheels (Type 41)Type 27 Wheels


Wheels (Type 41)

4 Inch(100 mm)

SideStandard Lever 320RA4;15000;427 320RA4;15000;441

4 Inch(100 mm)

SideStandard Lever 420RA4S;13000;427 420RA4S;13000;441

Safety Lever 320RA4K;15000;427 320RA4K;15000;441 Safety Lever 420RA4SK;13000;427 420RA4SK;13000;441

RearStandard Lever 320RA4R;15000;427 320RA4R;15000;441

RearStandard Lever 420RA4RS;13000;427 420RA4RS;13000;441

Safety Lever 320RA4RK;15000;427 320RA4RK;15000;441 Safety Lever 420RA4RSK;13000;427 420RA4RSK;13000;441

0.7 H.P.(600 W)

25 cfm (11.8 L/s) Max



1.2 H.P.(900 W)

35 cfm (16.5 L/s) Max




Type 1 (Type 41)Cut-off Wheel


Aluminum Case

SteelCase

Case Material

Aluminum Case

SteelCase

Case Material

RIGH

T AN

GLE

GRIN

DERS

Wheel

Screw

Inner Wheel Flange

Outer Wheel Flange

internal Threadmounting


Right Angle Grinders for Type 27, Type 27 Cut-Off (Type 42), Type 1 Cut-Off (Type 41) Wheels

7 Inch • 9 Inch • 10 Inch (180 mm) (230 mm) (250 mm)

520RA Series

520RA2l;6000;1041520RAK;8000;727

15.8 Inch(401 mm)

3.6 Inch(91 mm)

2.4 Inch(62 mm)

1.5 Inch(38 mm)


Type 1 (Type 41)Cut-off Wheel




The depressed center wheel adapters are not supplied as standard equipment with the tools. If you are using a wheel that requires the adapters, they must be purchased separately.

520RA Alternate Options Wheel MountingSTANDARD EQUIPMENT• Tool • operating instructions and Service manual • Wrenches (sizes based on options)

Wheel Size




Wheels (Type 41)

7 Inch(180 mm)

6000 RPMStandard Lever 520RAl;6000;727

Safety Lever 520RAK;6000;727

8000 RPMStandard Lever 520RAl;8000;727


9 Inch(230 mm)

6000 RPM

Standard Lever 520RAl;6000;927


10 Inch(250 mm)

Standard Lever 520RAl2;6000;1041

Safety Lever 520RAK2;6000;1041

2.0 H.P.(1.5 kW)


7.8 Lbs. (3.5 Kg) 1/2" NPT Inlet1/2" (13 mm) Hose Size

Thumb Switch

SafetyLever

StandardLever

Rear MountedDead Handle

Spindle Lock Button

Adjustable Guard







Right Angle Die Grinders

INFORMATION PAGE

Page number Tool Configuration Abrasive Size model

Series Power output

22• Large Bearing & Gears

for High Duty Cycle & Longevity • Carbide Burrs

• Mounted Stones• Flap Wheels• Sanding Abrasives w/Shank

Mounted Backing Pad

(3/8 Inch Shank Size Max.)

300RAD 0.7 H.P. (600 W)

410RAD 1.2 H.P. (900 W)

23• Large Bearing & Gears

for High Duty Cycle & Longevity

• Extended Neck

300RAED 0.7 H.P. (600 W)

410RAED 1.2 H.P. (900 W)

24 • Small Head for Restricted Applications • Carbide Burrs

• Mounted Stones• Flap Wheels• Sanding Abrasives w/Shank

Mounted Backing Pad (2 Inch Size Max.)


330RAD

0.7 H.P. (600 W)

340RAD

25• Small Head for

Restricted Applications

• Extended Neck

320RAD 0.7 H.P. (600 W)

420RAD 1.2 H.P. (900 W)

26 • Vertical Motor Design

• No Gears

• Carbide Burrs• Mounted Stones• Flap Wheels• Sanding Abrasives w/Shank

Mounted Backing Pad


300VGE 0.7 H.P. (600 W)


Safety Lever


Steel Case Material

Regular Lever Rear Exhaust

Side Exhaust


RIGH

T AN

GLE

GRIN

DERS


Right Angle Die Grinders

INFORMATION PAGE

Inserted Tool Mounting

1/4 inch (6 mm) - 3/8 inch (8 mm) mandrel Size (3/8 inch max.) 1/8 inch (3 mm) - 1/4 inch (6 mm) mandrel Size (1/4 inch max.)

Your Abrasive/Mounting Accessory must be rated at higher speeds than the rating on the tools. Please consult the abrasive manufacturer for proper speed ratings.

Extended Neck vs StandardThe extended neck option helps in regards to clearance issues when using various types of larger surface finishing abrasives. In these instances, the surface finishing abrasive can interfere with the area around the motor case normally used by the operator to grip the tool. The extended neck option moves the surface finishing abrasive forward which clears the area around the motor case for the operators hand.

Standard Style Right Angle Grinder

Extended Neck Right Angle Grinder

Inserted Tooling(Carbide Burrs/Mounted) Overhang - 1/2 Inch Max.

Cartridge Roll w/ Rubber Expanding Wheel

• 300RAD/300RAED• 410RAD/410RAED

• 330RAD/340RAD• 320RAD/420RAD

Flap WheelsCarbide Burrs Mounted Stones Surface Finishing/ Conditioning Wheels

Sandpaper Cartridge Rolls



Abrasive Mounting

7.4 Inch(189 mm)

3.1 Inch(79 mm)

1.5 Inch(37 mm)

7.1 Inch(188 mm)

3.1 Inch(79 mm)

1.6 Inch(41 mm)

Short Right Angle Collet Grinders

Mandrel Sizes: 1/4 Inch • 3/8 Inch (6 mm) (8 mm)

300RAD Series 410RAD Series

410RADRS;13000;1/4410RADSK;13000;1/4300RADK;15000;1/4


Standard Lever

Side Exhaust

Rear Exhaust


300RAD Alternate Options 410RAD Alternate Options

Aluminum Case

SteelCase

Case Material

Aluminum Case

SteelCase

Case MaterialSTANDARD EQUIPMENT• Tool • operating instructions and Service manual • Wrenches (sizes based on options)

lever Style moDEl numBER Exhaust Direction lever Style moDEl numBER

Standard Lever 300RAD;15000;1/4Side

Standard Lever 410RADS;13000;1/4

Safety Lever 300RADK;15000;1/4 Safety Lever 410RADSK;13000;1/4

RearStandard Lever 410RADRS;13000;1/4

Safety Lever 410RADRSK;13000;1/4

0.7 H.P.(600 W)

25 cfm (11.8 L/s) Max



1.2 H.P.(900 W)

35 cfm (16.5 L/s) Max



Carbide Burrs Flap WheelsMounted Stones

The ER Heavy Duty Collet is Standard Equipment on

300RAD & 410RAD Series.

Rear Exhaust

SideExhaust

Exhaust Direction

Safety Lever

StandardLever

Lever Style*

*APPliES To BoTH Tool SERiES

1/4" ShownOther Sizes Available


RIGH

T AN

GLE

GRIN

DERS


Abrasive Mounting

Mandrel Sizes: 1/4 Inch • 3/8 Inch (6 mm) (8 mm)

300RAED Alternate Options 410RAED Alternate Options

Aluminum Case

SteelCase

Case Material

Aluminum Case

SteelCase


Extended Neck Right Angle Collet Grinders

300RAED Series 410RAED Series

410RAEDS;13000;1/4 410RAEDRSK;13000;1/4300RAED;15000;1/4

Safety LeverStandard Lever Standard Lever

Side ExhaustSide Exhaust

Rear Exhaust

Steel Case

Steel Case

10.4 Inch(264 mm)

4.7 Inch(119 mm)

3.1 Inch(79 mm)

1.5 Inch(37 mm)

4.8 Inch(123 mm)

11.0 Inch(279 mm)

3.1 Inch(79 mm)

1.6 Inch(41 mm)

Carbide Burrs Flap WheelsMounted Stones

Exhaust Direction lever Style moDEl numBER Exhaust Direction lever Style moDEl numBER

SideStandard Lever 300RAED;15000;1/4

SideStandard Lever 410RAEDS;13000;1/4

Safety Lever 300RAEDK;15000;1/4 Safety Lever 410RAEDSK;13000;1/4

RearStandard Lever 300RAEDR;15000;1/4

RearStandard Lever 410RAEDRS;13000;1/4

Safety Lever 300RAEDRK;15000;1/4 Safety Lever 410RAEDRSK;13000;1/4

0.7 H.P.(600 W)

25 cfm (11.8 L/s) Max



1.2 H.P.(900 W)

35 cfm (16.5 L/s) Max




300RAED & 410RAED Series.

Rear Exhaust

SideExhaust

Exhaust Direction

Safety Lever

StandardLever

Lever Style*






7.1 Inch(180 mm)

2.0 Inch(51 mm)

1.5 Inch(37 mm)

Short Right Angle Collet Grinders

330RAD/340RAD Series

330RADK;12000;1/4

Safety Lever

maximum Rated operating Speed lever Style moDEl numBER

12,000 RPMStandard Lever 330RAD;12000;1/4

Safety Lever 330RADK;12000;1/4

20,000 RPMStandard Lever 340RAD;20000;1/4

Safety Lever 340RADK;20000;1/4

Mandrel Sizes: 1/8 Inch • 1/4 Inch (3 mm) (6 mm)Carbide Burrs Flap WheelsMounted Stones

Abrasive Mounting330RAD/340RAD Alternate OptionsSTANDARD EQUIPMENT• Tool • operating instructions and Service manual • Wrenches (sizes based on options)

0.7 H.P.(600 W)

25 cfm (11.8 L/s) Max



1.0 Inch(25 mm)

Aluminum Case

SteelCase

Case Material

Safety Lever

StandardLever

Lever Style


330RAD & 340RAD Series.


RIGH

T AN

GLE

GRIN

DERS



320RAD Series 420RAD Series

420RADRS;13000;1/4420RADSK;13000;1/4320RADK;20000;1/4

Safety Lever

Safety Lever

Standard Lever

Side Exhaust

Rear Exhaust

Side Exhaust

Steel Case

Steel Case

Exhaust Direction lever Style moDEl numBER Exhaust Direction lever Style moDEl numBER

SideStandard Lever 320RAD;20000;1/4

SideStandard Lever 420RADS;13000;1/4

Safety Lever 320RADK;20000;1/4 Safety Lever 420RADSK;13000;1/4

RearStandard Lever 320RADR;20000;1/4

RearStandard Lever 420RADRS;13000;1/4

Safety Lever 320RADRK;20000;1/4 Safety Lever 420RADRSK;13000;1/4

0.7 H.P.(600 W)

25 cfm (11.8 L/s) Max



1.2 H.P.(900 W)

35 cfm (16.5 L/s) Max



Extended Right Angle Collet Grinders

10.1 Inch(257 mm)

4.3 Inch(110 mm)

2.0 Inch(51 mm)

1.5 Inch(37 mm)

9.8 Inch(249 mm)

1.6 Inch(41 mm)

4.5 Inch(113 mm)

2.0 Inch(51 mm)

1.0 Inch(25 mm)

Abrasive Mounting320RAD Alternate Options 420RAED Alternate Options

Aluminum Case

SteelCase

Case Material

Aluminum Case

SteelCase



320RAED & 420RAED Series.

Rear Exhaust

SideExhaust

Exhaust Direction*

Safety Lever

StandardLever

Lever Style*





6.9 Inch(175 mm)

5.6 Inch(142 mm)

1.5 Inch(37 mm)

Vertical Collet Grinders

300VGE Series

300VGE;25000;1/4

Standard Lever

maximum Rated operating Speed lever Style moDEl numBER

Double Front Bearing ER Style

Insert Collet 3/8 Inch (8 mm)

Maximum

30,000 RPMStandard Lever 300VGE;30000;1/4

Safety Lever 300VGEK;30000;1/4








Abrasive Mounting300VGE Alternate OptionsSTANDARD EQUIPMENT• Tool • operating instructions and Service manual • Wrenches (sizes based on options)

0.7 H.P.(600 W)

25 cfm (11.8 L/s) Max


Safety Lever

StandardLever

Lever Style

The ER Heavy Duty Collet is Standard Equipment on 300VGE Series.


RIGH

T AN

GLE

GRIN

DERS




Right Angle Sanders, Buffers & Polishers

INFORMATION PAGE

Non-Woven Nylon Web or Convolute Abrasives

Surface Conditioning Abrasives


Series Power output

30 • Large Bearing

& Gears for High Duty Cycle & Longevity

3 Inch (75 mm) 300RA0.7 H.P. (600 W)

4 Inch (100 mm), 4 1/2 Inch (115 mm) or 5 Inch (125 mm)

307RA400RA

1.2 H.P. (900 W)410RA407RA

31• Large Bearing

& Gears for High Duty Cycle & Longevity

• Extended Neck

3 Inch (75 mm) 300RAE0.7 H.P. (600 W)

4 Inch (100 mm), 4 1/2 Inch (115 mm) or 5 Inch (125 mm)

317RAE307RAE400RAE

1.2 H.P. (900 W)410RAE407RAE

32• Small Head


2 Inch (50 mm) 330RA340RA 0.7 H.P. (600 W)

33• Small Head


• Extended Neck

2 Inch (50 mm)320RA 0.7 H.P. (600 W)

420RA 1.2 H.P. (900 W)

34• Extremely

Small Head for Restricted Applications

• Extended Neck

2 Inch (50 mm)

3101RA 0.7 H.P. (600 W)

4101RA 1.2 H.P. (900 W)

35 • Heavy-Duty,

Large Head for Longer Life.

5 Inch (125 mm) 4620RA1.2 H.P. (900 W)

7 Inch (180 mm)4520RA

520RA 2.0 H.P. (1.5 kW)

36• Planetary Gear

Systems for Low Speed Applications

5 Inch (125 mm)300RA(X)M

0.7 H.P. (600 W)310RA(X)M

7 Inch (180 mm)

400RA(X)M

1.2 H.P. (900 W)410RA(X)M

4620RA(X)M

37• Planetary Gear

Systems for Low Speed Applications

• Extended Neck

5 Inch (125 mm)300RAE(X)M

0.7 H.P. (600 W)310RAE(X)M

7 Inch (180 mm)400RAE(X)M

1.2 H.P. (900 W)410RAE(X)M

RIGH

T AN

GLE

SAND

ERS






Safety Lever


Steel Case Material

Regular Lever

Rear Exhaust Side Exhaust





1/4-20 X 1/2 inchSpindle

output Thread Size & length

Popular Sanding Pad Sizes • 4 Inch • 5 Inch

• 7 Inch• 2 Inch• 3 Inch

optional Sanding Pad Sizes • 5 Inch • 4 Inch

Right Angle Sanders, Buffers & Polishers

INFORMATION PAGE

Extended Neck vs StandardExtended neck tools allow the operator to reach further into the work-piece This extended reach coupled with the small heads found on Top Cat tools can allow fine finishing in the tightest of areas. Furthermore, the extended neck tools can be fitted with larger diameter abrasives allowing for more efficient material removal and better, more consistent surface finishes.

Sanding Disk Mounting for Right Angle Sanders

Standard Style Right Angle Sander

Sanding Pad

Sanding Disc

Sanding Pad Nut

Extended Neck Right Angle Sander

Spiralcool® PadsPart number Threads Size Description maximum Speed

889271-A 3/8-24 4 Inch (100 mm) Sanding Pad 12000 R.P.M.849848-A 3/8-24 5 Inch (125 mm) Sanding Pad 10000 R.P.M.889271 5/8-11 4 Inch (100 mm) Sanding Pad 12000 R.P.M.849848 5/8-11 5 Inch (125 mm) Sanding Pad 10000 R.P.M.849913 5/8-11 7 Inch (180 mm) Sanding Pad 8500 R.P.M.849914 5/8-11 9 Inch (230 mm) Sanding Pad 6500 R.P.M.

849259-A 3/8-24 Sanding Pad Nut849259 5/8-11 Sanding Pad Nut

102-SPWR Pad Nut Wrench

RIGHT ANGLE SANDERS


Surface Conditioning Abrasive Mounting

3.0 Inch(76 mm)

1.6 Inch(41 mm)

400RA 7.1 Inch

(188 mm)

407RA 8.0 Inch

(203 mm)

300RA7.4 Inch

(189 mm)

307RA8.1 Inch

(206 mm)

307RA 3.0 Inch(76 mm)

300RA6 2.6 Inch(66 mm)

1.5 Inch(37 mm)

Short Right Angle Sanders, Buffers & Polishers for Surface Finishing Abrasives

3 Inch • 5 Inch (75 mm) (125 mm)

300RA Series & 307RA Series 400RA Series & 407RA Series

400RA2K;10000;5SP400RA2R;10000;5SP300RA6K;15000 307RA2K;10000;5SP

Safety Lever

Safety Lever

Safety Lever Standard Lever

Side Exhaust

Rear Exhaust

Rear Exhaust

Rear Exhaust

Aluminum Case

Aluminum Case

Aluminum Case

Aluminum Case

300RA & 307RA Alternate Options

300-400RA & 307-407RA Alternate Options

400RA & 407RA Alternate Options


0.7 H.P.(600 W)

300RA: 25 cfm (11.8 L/s) Max307RA: 15 cfm (7.1 L/s) Free Speed 25 cfm (11.8 L/s) Max



1.2 H.P.(900 W)

400RA: 35 cfm (16.5 L/s) Max407RA: 20 cfm (9.4 L/s) Free Speed 35 cfm (16.5 L/s) Max



The 407RA is available with rated speeds within the range of 6000 to 8000 RPm.

Aluminum Case

SteelCase

Case Material

Aluminum Case

SteelCase

Case Material

Safety Lever

StandardLever

Lever Style

Sanding Pad Size Exhaust Direction

Spindle output lever Style model number Sanding Pad Size Exhaust

DirectionSpindle output lever Style model number

3 Inch(75 mm)

Rear

1/4-20Standard Lever 300RA6;15000

Safety Lever 300RA6K;15000

4 Inch(100 mm) 3/8-24

Standard Lever 307RA4;10000;4SP

4 Inch(100 mm)

Side3/8-24

Standard Lever 400RA4;10000;4SPSafety Lever 307RA4K;10000;4SP Safety Lever 400RA4K;10000;4SP

4 1/2 Inch(115 mm)

5/8-11

Standard Lever 300RA2;15000;45SPRear

Standard Lever 400RA4R;10000;4SPSafety Lever 300RA2K;15000;45SP Safety Lever 400RA4KR;10000;4SP

5 Inch(125 mm)

Standard Lever 307RA2;10000;5SP

4 1/2 Inch(115 mm)

Side

5/8-11

Standard Lever 410RA2;13000;45SPSafety Lever 307RA2K;10000;5SP Safety Lever 410RA2K;13000;45SP

The 307RA is available with rated speeds within the range of 7000 to 10000 RPM. RearStandard Lever 410RA2R;13000;45SP

Safety Lever 410RA2KR;13000;45SP

5 Inch(125 mm)

SideStandard Lever 400RA2;10000;5SP

Safety Lever 400RA2K;10000;5SP

RearStandard Lever 400RA2R;10000;5SP

Safety Lever 400RA2KR;10000;5SP

SideStandard Lever 407RA2; 8000 ;5SP

Safety Lever 407RA2K; 8000 ;5SP

RIGH

T AN

GLE

SAND

ERS


Sanding Pad Size Exhaust Direction

Spindle output lever Style Model Number Sanding Pad Size Exhaust

DirectionSpindle output lever Style model number

3 Inch(75 mm)

Rear

1/4-20Standard Lever 300RAE6;15000

Safety Lever 300RAE6K;15000

4 Inch(100 mm) 3/8-24

Standard Lever 317RAE4;12000;4SP

4 Inch(100 mm)

Side3/8-24

Standard Lever 400RAE4;10000;4SPSafety Lever 317RAE4K;12000;4SP Safety Lever 400RAE4K;10000;4SP

4 1/2 Inch(115 mm)

5/8-11

Standard Lever 300RAE2;15000;45SPRear

Standard Lever 400RAE4R;10000;4SPSafety Lever 300RAE2K;15000;45SP Safety Lever 400RAE4KR;100004SP

5 Inch(125 mm)

Standard Lever 307RAE2;10000;5SP

4 1/2 Inch(115 mm)

Side

5/8-11

Standard Lever 410RAE2;13000;45SPSafety Lever 307RAE2K;10000;5SP Safety Lever 410RAE2K;13000;45SP

The 307RAE is available with rated speeds within the range of 7000 to 10000 RPM. RearStandard Lever 410RAE2R;13000;45SP

Safety Lever 410RAE2KR;13000;45SP

5 Inch(125 mm)

SideStandard Lever 400RAE2;10000;5SP

Safety Lever 400RAE2K;10000;5SP

RearStandard Lever 400RAE2R;10000;5SP

Safety Lever 400RAE2KR;10000;5SP

SideStandard Lever 407RAE2;8000;5SP

Safety Lever 407RAE2K;8000;5SP


3 Inch • 5 Inch (75 mm) (125 mm)

Safety Lever

Safety Lever


Side Exhaust

Rear ExhaustRear Exhaust

Rear Exhaust

Aluminum Case

Aluminum Case

Aluminum CaseAluminum Case

300RAE & 307RAE Alternate Options

300-400RAE & 307-407RAE Alternate Options

400RAE & 407RAE Alternate Options


Extended Right Angle Sanders, Buffers & Polishers for Surface Finishing Abrasives

300RAE Series & 307RAE Series 400RAE Series & 407RAE Series

400RAE2R;10000;5SP 400RAE2K;10000;5SP300RAE6K;15000 307RAE2K;10000;5SP

4.7 Inch(119 mm)

4.8 Inch(123 mm)

3.0 Inch(76 mm)

1.5 Inch(37 mm)

1.6 Inch(41 mm)

0.7 H.P.(600 W)

300RAE: 25 cfm (11.8 L/s) Max307RAE: 15 cfm (7.1 L/s) Free Speed 25 cfm (11.8 L/s) Max



1.2 H.P.(900 W)

400RAE: 35 cfm (16.5 L/s) Max407RAE: 20 cfm (9.4 L/s) Free Speed 35 cfm (16.5 L/s) Max



The 407RAE is available with rated speeds within the range of 6000 to 8000 RPm.

Aluminum Case

SteelCase

Case Material

Aluminum Case

SteelCase

Case Material

Safety Lever

StandardLever

Lever Style

307RAE 3.0 Inch(76 mm)

300RAE6 2.6 Inch(66 mm)

300RAE10.4 Inch(264 mm)

307RA11.1 Inch(282 mm)

400RAE11.0 Inch(279 mm)

407RAE11.9 Inch(302 mm)

RIGHT ANGLE SANDERS



7.1 Inch(180 mm)

1.8 Inch(46 mm)

1.5 Inch(37 mm)

Short Right Angle Sanders, Buffers & Polishers for Surface Finishing Abrasives

2 Inch (50 mm)

330RA/340RA Series

330RA6K;12000

Safety LeverRear Exhaust

Aluminum Case

330RA/340RA Alternate OptionsSTANDARD EQUIPMENT• Tool • operating instructions and Service manual • Wrenches (sizes based on options)

0.7 H.P.(600 W)

25 cfm (11.8 L/s) Max



maximum Sanding Pad Size max. Rated Speed Exhaust Direction lever Style moDEl numBER

2 Inch(50 mm)

1/4-20 Spindle Output Thread

12000 RPM

Rear

Standard Lever 330RA6;12000


20000 RPMStandard Lever 340RA6;20000


Aluminum Case

SteelCase

Case Material

Safety Lever

StandardLever

Lever Style

RIGH

T AN

GLE

SAND

ERS



2 Inch (50 mm)

Safety Lever


Rear Exhaust

Rear ExhaustSide Exhaust


Aluminum Case



420RA6R;13000 420RA6K;13000320RA6K;15000

10.1 Inch(257 mm) 9.8 Inch

(249 mm)

4.5 Inch(113 mm) 4.5 Inch

(113 mm)


(46 mm)


(41 mm)

320RA Alternate Options

320-420RA Alternate Options



Sanding Pad Size Exhaust Direction lever Style moDEl numBER Sanding Pad Size Exhaust Direction lever Style moDEl numBER

2 Inch(50 mm)


SideStandard Lever 320RA6;20000

2 Inch(50 mm)



Safety Lever 320RA6K;20000 Safety Lever 420RA6K;13000

RearStandard Lever 320RA6R;20000


Safety Lever 320RA6KR;20000 Safety Lever 420RA6KR;13000

0.7 H.P.(600 W)

25 cfm (11.8 L/s) Max



1.2 H.P.(900 W)

35 cfm (16.5 L/s) Max



Aluminum Case

SteelCase

Case Material

Aluminum Case

SteelCase

Case Material

Safety Lever

StandardLever

Lever Style

RIGHT ANGLE SANDERS




2 Inch (50 mm)


Standard Lever

Rear Exhaust



Aluminum Case


4101RA6R;15000 4101RA6K;150003101RA6K;23000

9.7 Inch(246 mm)

9.4 Inch(239 mm)

4.0 Inch(102 mm)

4.2 Inch(107 mm)

1.6 Inch(41 mm)

1.6 Inch(41 mm)

1.5 Inch(37 mm)

1.6 Inch(41 mm)



3101-4101RA Alternate Options


Sanding Pad Size Exhaust Direction lever Style moDEl numBER Sanding Pad Size Exhaust Direction lever Style moDEl numBER

2 Inch(50 mm)



2 Inch(50 mm)



Safety Lever 3101RA6K;23000 Safety Lever 4101RA6K;15000



Safety Lever 3101RA6KR;23000 Safety Lever 4101RA6KR;15000

0.7 H.P.(600 W)

25 cfm (11.8 L/s) Max



1.2 H.P.(900 W)

35 cfm (16.5 L/s) Max



Aluminum Case

SteelCase

Case Material

Aluminum Case

SteelCase

Case Material

Safety Lever

StandardLever

Lever Style

RIGH

T AN

GLE

SAND

ERS



5 Inch • 7 Inch (125 mm) (180 mm)

Safety Lever Safety Lever

Standard Lever

Rear Exhaust

Side Exhaust

Side Exhaust


Aluminum Case



4520RAR;6000;7SP 4520RAK;6000;7SP 520RAK;8000;7SP

15.8 Inch(401 mm)

10.3 Inch(262 mm)

3.7 Inch(94 mm)

3.7 Inch(94 mm)

1.5 Inch(38 mm)

1.6 Inch(41 mm)

4520RA Alternate OptionsSTANDARD EQUIPMENT• Tool • operating instructions and Service manual • Wrenches (sizes based on options)

Sanding Pad Size Exhaust Direction lever Style moDEl numBER Sanding Pad Size lever Style moDEl numBER

5 Inch(125 mm)


SideStandard Lever 4620RA;10000;5SP

Safety Lever 4620RAK;10000;5SP

RearStandard Lever 4620RAR;10000;5SP

Safety Lever 4620RAKR;10000;5SP

7 Inch(180 mm)


SideStandard Lever 4520RA;6000;7SP

Safety Lever 4520RAK;6000;7SP

RearStandard Lever 4520RAR;6000;7SP 7 Inch

(180 mm)


Standard Lever 520RA;8000;7SP

Safety Lever 4520RAKR;6000;7SP Safety Lever 520RAK;8000;7SP

1.2 H.P.(900 W)

35 cfm(16.5 L/s) Max


3/8" NPT Inlet1/2" (13mm) Hose Size

2.0 H.P.(1.5 kW)



Aluminum Case

SteelCase

Case Material

Safety Lever

StandardLever

Lever Style

Rear Exhaust

SideExhaust

Exhaust Direction

RIGHT ANGLE SANDERS



Geared Right Angle Sanders, Buffers & Polishers for Surface Finishing Abrasives

5 Inch • 7 Inch (125 mm) (180 mm)

Safety LeverRear Exhaust Safety Lever


Standard Lever

Aluminum Case

Aluminum Case Aluminum Case

400RA(X)M Series 4620RA(X)M Series 300RA(X)M Series

400RA3m2K;4000;7SP 4620RA3m2K;4200;7SP300RA3m2;4000;5SP

300RA(X)M, 400RA(X)M & 4620RA(X)M Alternate OptionsSTANDARD EQUIPMENT• Tool • operating instructions and Service manual • Wrenches (sizes based on options)

Sanding Pad Size

max. Rated Speed lever Style SHoRT RA HEAD

moDEl numBERSanding Pad Size

Exhaust Direction

max. Rated Speed

lever Style moDEl numBER Sanding

Pad SizeExhaust

Direction

max. Rated Speed

lever Style moDEl numBER

5 Inch(125 mm)


5200 RPMStandard

Lever 310RA3m2;5200;5SP

7 Inch(180 mm)


Side

3800 RPM

Standard Lever 410RA3m2;3800;7SP

7 Inch(180 mm)

5/8-11 Spindle Output Thread5/8-11 Spindle Output Thread

Side

4200 RPM


Safety Lever 310RA3m2K;5200;5SP Safety Lever 410RA3m2K ;3800;7SP Safety

Lever 4620RA3m2K;4200;7SP

4000 RPMStandard

Lever 300RA3m2;4000;5SP 2900 RPM

Standard Lever 400RA3m2;2900;7SP 3100

RPM


Safety Lever 300RA3m2K;4000;5SP Safety Lever 400RA3m2K;2900;7SP Safety


3000 RPMStandard


Standard Lever 400RA5m2;2200;7SP 1900

RPM




1800 RPMStandard



Rear

4200 RPM

Standard Lever 4620RA3m2R;4200;7SP


Lever 4620RA3m2RK;4200;7SP

Rear

3800 RPM

Standard Lever 410RA3mR;3800;7SP 3100

RPM


Safety Lever 410RA3mRK;3800;7SP Safety


2900 RPM

Standard Lever 400RA3m2R;2900;7SP 1900

RPM


Safety Lever 400RA3m2RK;2900;7SP Safety


2200 RPM


Safety Lever 400RA5m2RK;2200;7SP

1300 RPM


Safety Lever 400RA8m2RK;1300;7SP

1.2 H.P.(900 W)

35 cfm (16.5 L/s) Max



1.2 H.P.(900 W)

35 cfm (16.5 L/s) Max

6.3 Lbs (2.9 Kg) Aluminum6.9 Lbs (3.1 Kg) Steel


0.7 H.P.(600 W)

25 cfm (11.8 L/s) Max



Aluminum Case

SteelCase

Case Material

Safety Lever

StandardLever

Lever Style

Rear Exhaust

SideExhaust

Exhaust Direction

7.0 Inch(178 mm)

7.0 Inch(178 mm)

12.1 Inch(307mm)

1.6 Inch(41 mm)

1.5 Inch(37 mm)

1.6 Inch(41 mm)

3.0 Inch(76 mm)

3.0 Inch(76 mm)

3.7 Inch(94 mm)

RIGH

T AN

GLE

SAND

ERS




Standard LeverSafety Lever

Rear ExhaustRear Exhaust


400RAE(X)M Series300RAE(X)M Series

400RAE3m2R;2900;7SP300RAE3m2K;4000;5SP

11.9 Inch(302 mm)

12.1 Inch(307 mm)

4.8 Inch(123 mm)

4.8 Inch(123 mm)

3.0 Inch(76 mm)

3.0 Inch(76 mm)

1.6 Inch(41 mm)

1.5 Inch(37 mm)

300RAE(X)M & 400RAE(X)M Alternate OptionsSTANDARD EQUIPMENT• Tool • operating instructions and Service manual • Wrenches (sizes based on options)

Sanding Pad Size max. Rated Speed lever Style moDEl numBER Sanding Pad Size

Exhaust Direction

max. Rated Speed lever Style moDEl numBER

5 Inch(125 mm)

5/8-11 Spindle Output

Thread

5200 RPMStandard Lever 310RAE3m2;5200;5SP

7 Inch(180 mm)


Side


Safety Lever 310RAE3m2K;5200;5SP Safety Lever 410RAE3m2K;3800;7SP










Rear

3800 RPMStandard Lever 410RAE3m2R;3800;7SP

Safety Lever 410RAE3m2RK;3800;7SP







1.2 H.P.(900 W)




0.7 H.P.(600W)

25 cfm (11.8 L/s) Max

4.2 lbs (1.9 Kg) Aluminum4.6 lbs (2.1 Kg) Steel


Aluminum Case

SteelCase

Case Material

Safety Lever

StandardLever

Lever Style

Rear Exhaust

SideExhaust

Exhaust Direction

5 Inch • 7 Inch (125 mm) (180 mm)

RIGHT ANGLE SANDERS


Horizontal Grinders

INFORMATION PAGE

Page number Application Abrasive Type/Size model Series Power

output mounting of Abrasives

403 Inch (75 mm) to 4 Inch (100 mm)

Type 1Type 1 Cut-off

(Type 41) Wheel

400GH407GH4

1.2 H.P. (900 W)

507H4 1.5 H.P. (1.2 kW)

414 Inch (100 mm),

6 Inch (150 mm) or 8 Inch (200 mm)

Type 1Type 1 Cut-off

(Type 41) Wheel

520H 2.0 H.P. (1.5 kW)

56H 3.0 H.P. (2.3 kW)

65H 4.0 H.P. (3.0 kW)

42 3/8-24 Threaded Cone Wheels

400GH1 1.2 H.P. (900 W)

507H1 1.5 H.P. (1.2 kW)

43 5/8-11 Threaded Cone Wheels

400GH2(2 Inch Max.

Diameter)

1.2 H.P. (900 W)

507H2(2 Inch Max.

Diameter)

1.5 H.P. (1.2 kW)

520HCW 2.0 H.P. (1.5 kW)

44 Collet Mounted Abrasives

• Burrs

• Mounted Stones

• Flap Wheels

• Cartridge Rolls

• Expander Wheels

300EH

0.7 H.P. (600 W)

300GHD

45400GHD 1.2 H.P.

(900 W)

507HD 1.5 H.P. (1.2 kW)

46• Flap Wheels

• Sanding Abrasives

(5/8" or 1" ID Mount)

300GH(X)M 0.7 H.P. (600 W)

See Model Spread400GH(X)M 1.2 H.P. (900 W)

500H1M 1.5 H.P. (1.2 kW)

Drive Flange Wheel

Outer Wheel Flange

Drive Flange

Wheel

Collet Mounted Abrasiveor Carbide Burr

HORI

ZONT

AL G

RIND

ERS



LEVER STYLE


Steel Case Material

INFORMATION PAGE

EXHAUST DIRECTION

CASE MATERIAL


THE TOP CAT® COMBINATION ARBORThe combination arbor allows one to mount several different types to surface conditioning wheels onto our geared (low speed) horizontal sanders/polishers.





Front Exhaust

Side Exhaust

Rear Exhaust0.7 HP & 1.2 HP Tools

HORIZONTAL GRINDERS

ADTS-1-17MM – Adapter Body (400GHXM)ADTS-1-520 – Adapter Body (400GTXM & 500H1M)

Surface Conditioning Wheel(1 Inch in this example)

ADTS-5 Outer Flange(Note: Smaller Diameter Oriented Toward Wheel)

ADTS-2 Inner Flange(Note: Smaller Diameter Oriented Toward Wheel)

ADTS-3 Spacer

ADTS-4 Spacer

ADTS-2 Inner Flange

ADTS-2 Outer Flange

700-50 Screw

Spacers

The "stack-up" or ordering of the components change based on the type and thickness of wheel you intend to use. Please examine the picture to the right and chart below for the position ordering of the components parts to properly mount your particular wheel.

Wheel Type &mounting Thickness

Position from Adapter Body

(A) (B) (C) (D) (E) (F)

1" Thick Flap Wheelw/Recessed Mounting

ADTS-3(Thick Spacer)


ADTS-4(Thin Spacer)

ADTS-2(Inner Flange)

Wheel ADTS-5(Outer Flange)

1" Thick Surface Conditioning Wheel




ADTS-4(Thin Spacer)



ADTS-4(Thin Spacer)







ADTS-4(Thin Spacer)


ADTS-4(Thin Spacer)








ADTS-4(Thin Spacer)

PoSiTion oF mounTinG ACCESSoRy: (A) (B) (C) (D) (E) (F)( Spacer or Flange Based on Thickness of Wheel)


13.6 Inch(345 mm)

13.6 Inch(345 mm)

18.7 Inch(475 mm)

1.6 Inch(41 mm)

1.3 Inch(33 mm)

1.3 Inch(33 mm)

1.6 Inch(41 mm)


(36 mm)

Horizontal Grinders for 3 Inch & 4 Inch Type 1 Wheels

3 Inch • 4 Inch (75 mm) (100 mm)

400GH Series & 407GH Series 507H Series

507HK4;15000;401

400GH4SKR;18000;301

407GH4S;15000;401

Safety Lever

Standard Lever

Safety Lever

Side Exhaust

Rear Exhaust

Side Exhaust

Steel Case

Steel Case

Steel Case

400GH & 407GH SeriesAlternate Options


1.2 H.P.(900 W)

400GH: 35 cfm (16.5 L/s) Max407GH: 20 cfm (9.4 L/s) Free Speed 35 cfm (16.5 L/s) Max



1.5 H.P.(1.1 kW)

20 cfm (9.4 L/s) Free Speed 35 cfm (16.5 L/s) Max

7.4 Lbs. (3.4 Kg) Steel Only 1/2" NPT Inlet1/2" (13 mm) Hose Size

400GH

407GH

Guard/Wheel Size Exhaust Direction lever Style moDEl numBER Guard/Wheel Size Exhaust Direction lever Style moDEl numBER

3 Inch (75 mm)Side

Standard Lever 400GH4S;18000;3013 Inch (75 mm) Side

Standard Lever 507HlS4;18000;301Safety Lever 400GH4SK;18000;301 Safety Lever 507HKS4;18000;301

RearStandard Lever 400GH4SR;18000;301

Safety Lever 400GH4SKR;18000;301

4 Inch (100 mm) SideStandard Lever 407GH4S;15000;401

4 Inch (100 mm) SideStandard Lever 507HlS4;15000;401

Safety Lever 407GH4SK;15000;401 Safety Lever 507HKS4;15000;401

Type 1 Wheel Mounting

Aluminum Case

SteelCase

Case Material

Safety Lever

Standard Lever

Lever Style

Rear Exhaust

SideExhaust

Exhaust Direction

HORI

ZONT

AL G

RIND

ERS

1/2 Inch (13 mm) Max. Wheel Thickness


21.0 Inch(533 mm)

22.2 Inch(564 mm)

22.8 Inch(579 mm)

1.5 Inch(38 mm)


(38 mm)1.8 Inch(46 mm) 1.8 Inch

(46 mm)

4 Inch • 6 Inch • 8 Inch (100 mm) (150 mm) (200 mm)

520H, 56H & 65H SeriesAlternate Options


Horizontal Grinders for 6 Inch & 8 Inch Type 1 Wheels

520H Series 56H Series 65H Series

Guard/Wheel Size lever Style moDEl numBER Guard/Wheel

SizeRated Speed lever Style moDEl numBER Guard/Wheel

SizeRated Speed lever Style moDEl numBER

4 Inch (100 mm)

Standard Lever 520Hl;12000;401Safety Lever 520HK;12000;401

6 Inch (150 mm)

Standard Lever 520Hl;8000;601

6 Inch (150 mm)

8000 RPMStandard Lever 56Hl;8000;601

Safety Lever 520HK;8000;601 Safety Lever 56HK;8000;601

6000 RPM

Standard Lever 56Hl;6000;601 6 Inch (150 mm)

6000 RPM

Standard Lever 65Hl;6000;601Safety Lever 56HK;6000;601 Safety Lever 65HK;6000;601

8 Inch (200 mm)

Standard Lever 56Hl;6000;801 8 Inch (200 mm)

Standard Lever 65Hl;6000;801Safety Lever 56HK;6000;801 Safety Lever 65HK;6000;801

2.0 H.P.(1.5 kW)


10.8 Lbs. (4.9 Kg) Steel Only


3.0 H.P.(2.2 kW)


14.8 Lbs. (6.7 Kg) Aluminum Only


4.0 H.P.(3.0 kW)


17.4 Lbs. (7.9 Kg) Aluminum Only


Safety Lever Safety Lever

Spade Handle

Side Exhaust

Side Exhaust Side Exhaust

Steel CaseAluminum Case Aluminum Case

520HK;8000;601 56HK;6000;601 65HG;6000;801

Type 1 Wheel Mounting

Handles

Thumb Switch

SafetyLever

StandardLever

SpadeHandle

HORIZONTAL GRINDERS

1 Inch (25 mm) Max. Wheel Thickness


17.4 Inch(442 mm)

11.9 Inch(302 mm)

12.8 Inch(305 mm)

1.5 Inch(38 mm)

1.4 Inch(36 mm)

1.6 Inch(41 mm)

1.3 Inch(33 mm)

1.3 Inch(33 mm)

1.6 Inch(41 mm)

Horizontal Grinders for 3/8-24 Cone Wheels

3/8-24 Threaded Cone Wheels

400GH Series 507H Series

507HKS1;18000

400GH1SK;18000

400GH1SR;18000

Safety Lever

Safety Lever

Standard Lever

Side Exhaust

Side Exhaust

Rear Exhaust

Steel Case

Steel Case

Steel Case

400GH Series Series Alternate Options


1.2 H.P.(900 W) 35 cfm (16.5 L/s)



1.5 H.P.(1.1 kW)



400GH

400GHRearExhaust

max. Rated Speed Exhaust Direction lever Style moDEl numBER max. Rated Speed Exhaust Direction lever Style moDEl numBER

20000 RPMSide

Standard Lever 400GH1S;20000

Safety Lever 400GH1SK;20000

RearStandard Lever 400GH1SR;20000

Safety Lever 400GH1SKR;20000

18000 RPMSide

Standard Lever 400GH1S;1800018000 RPM Side

Standard Lever 507HlS1;18000Safety Lever 400GH1SK;18000 Safety Lever 507HKS1;18000


Safety Lever 400GH1SKR;18000

Cone Wheel Mounting

Aluminum Case

SteelCase

Case Material

Safety Lever

StandardLever

Lever Style

Rear Exhaust

SideExhaust

Exhaust Direction

HORI

ZONT

AL G

RIND

ERS

2 Inch (50 mm) Max. Diameter


11.9 Inch(302 mm)

12.8 Inch(325 mm)

17.4 Inch(442 mm)

19.4 Inch(493 mm)

1.6 Inch(41 mm)

1.3 Inch(33 mm)

1.3 Inch(33 mm)

1.6 Inch(41 mm)

1.5 Inch(38 mm)

1.4 Inch(36 mm)

1.5 Inch(38 mm)

1.5 Inch(38 mm)

5/8-11 Threaded Cone Wheels

400GH Series Alternate OptionsSTANDARD EQUIPMENT• Tool • operating instructions and Service manual • Wrenches (sizes based on options)

Horizontal Grinders for 5/8-11 Cone Wheels

400GH Series 507H Series 520H Series

max. Rated Speed

Exhaust Direction lever Style moDEl numBER max. Rated

SpeedExhaust

Direction lever Style moDEl numBER max. Rated Speed

ExhaustDirection lever Style moDEl numBER

20000 RPMSide


Standard Lever 520HlSCW;12000Safety Lever 400GH2SK;20000 Safety Lever 520HKSCW;12000


Safety Lever 400GH2SRK;20000

18000 RPMSide


Standard Lever 507HlS2;18000Safety Lever 400GH2SK;18000 Safety Lever 507HKS2;18000


Safety Lever 400GH2SRK;18000

1.2 H.P.(900 W)

35 cfm (16.5 L/s)



1.5 H.P.(1.1 kW)




2.0 H.P.(1.5 kW)




Safety Lever

Standard Lever

Safety Lever Safety LeverSide Exhaust

Rear Exhaust


Steel Case

Steel Case

Steel Case

Steel Case

400GH2SK;18000

400GH2SR;18000 507HKS2;18000 520HKSCW;12000

Cone Wheel Mounting

Aluminum Case

SteelCase

Case Material

Safety Lever

StandardLever

Lever Style

Rear Exhaust

SideExhaust

Exhaust Direction

HORIZONTAL GRINDERS

• 2 Inch (50 mm) Max. Diameter (400GH & 507H Series)• 3 Inch (75 mm) Max. Diameter (520H Series)

Side Exhaust

Rear Exhaust



Horizontal Die Grinders (Collet Output)

300EH Series 300GH Series

300GHD;25000;1/4300EHK;25000;1/4


Rear ExhaustSide Exhaust

Aluminum Case

Aluminum Case

Steel Front Housing

300EH & 300GH Series Alternate Options


0.7 H.P.(600 W)

25 cfm (11.8 L/s) Max



0.7 H.P.(600 W)




Collet Type/Capacity

Exhaust Direction

max. Rated Speed lever Style moDEl numBER Collet

Type/CapacityExhaust

Directionmax. Rated

Speed lever Style moDEl numBER

ER Style Insert Collet

1/4 Inch or (7 mm) Maximum

Rear30000 RPM

Standard Lever 300EH;30000;1/4

1/4 Inch Standard



Side30000 RPM

Standard Lever 300GHD;30000;1/4Safety Lever 300EHK;30000;1/4 Safety Lever 300GHDK;30000;1/4

25000 RPMStandard Lever 300EH;25000;1/4

RearStandard Lever 300GHDR;30000;1/4

Safety Lever 300EHK;25000;1/4 Safety Lever 300GHDRK;30000;1/4

Side25000 RPM

Standard Lever 300GHD;25000;1/4Safety Lever 300GHDK;25000;1/4

RearStandard Lever 300GHDR;25000;1/4

Safety Lever 300GHDRK;25000;1/4

11.8 Inch(300 mm)

1.5 Inch(37 mm)

1.5 Inch(37 mm)

1/4 Inch Collet • 3/8 Inch Collet (6 mm) (8 mm)

0.9 Inch(23 mm)

1.3 Inch(33 mm)

12.9 Inch(328 mm)

Aluminum Case

SteelCase

Case Material

Safety Lever

StandardLever

Lever Style

HORI

ZONT

AL G

RIND

ERS

Insert Style or 2 Pc. Collets are available.



400GH Series 507H Series

500HKSD;18000;1/4400GHKSD;20000;1/4



Steel Case

Steel Case

400GH Series Alternate OptionsSTANDARD EQUIPMENT• Tool • operating instructions and Service manual • Wrenches (sizes based on options)

1.2 H.P.(900 W) 35 cfm (16.5 L/s)



1.5 H.P.(1.1 kW)

35 cfm (16.5 L/s) Max


Horizontal Die Grinders (Collet Output)


Exhaust Direction



Directionmax. Rated


1/4 Inch Standard


3/8 Inch or (10mm)Maximum

Side

20000 RPM

Standard Lever 400GHSD;20000;1/4

Safety Lever 400GHKSD;20000;1/4

RearStandard Lever 400GHSRD;20000;1/4

Safety Lever 400GHKSRD;20000;1/4

Side

18000 RPM

Standard Lever 400GHSD;18000;1/4 1/4 Inch Standard


Side 18000 RPMStandard Lever 507HlSD;18000;1/4

Safety Lever 400GHKSD;18000;1/4 Safety Lever 507HKSD;18000;1/4CXZ

RearStandard Lever 400GHSRD;18000;1/4

Safety Lever 400GHKSRD;18000;1/4

18.4 Inch(467 mm)

1.4 Inch(36 mm)

1.5 Inch(38 mm)

12.5 Inch(318 mm)

1.6 Inch(41 mm)

1.3 Inch(33 mm)

1/4 Inch Collet • 3/8 Inch Collet (6 mm) (8 mm)

Aluminum Case

SteelCase

Case Material

Safety Lever

StandardLever

Lever Style

Rear Exhaust

SideExhaust

Exhaust Direction

HORIZONTAL GRINDERS

Insert Style or 2 Pc. Collets are available.


Mounting

Geared Horizontal Polishers/Sanders

300GH(X)M & 400GH(X)M Series 500H1M Series

500H1mK;4000;T5/8300GH3mD;8250;1/4 400GH3mDK;5500;S1

Safety LeverStandard Lever

Collet Output

Safety Lever

Side Exhaust

Rear Exhaust

Side Exhaust

S1 Combination

Arbor T5/8 OutputAluminum

Case

AluminumCase

300GH(X)M, 400GH(X)M Series Alternate Options


0.7 H.P.(600 kW)

25 cfm (11.8 L/s) Max



1.2 H.P. (900 W)

35 cfm (16.5 L/s)



1.5 H.P.(1.1 kW)

35 cfm (16.5 L/s) Max


300GH(X)m Series 400GH(X)m Series

output Gear Ratio/ max. Rated Speed lever Style moDEl numBER moDEl numBER output Gear Ratio/

max. Rated Speed lever Style moDEl numBER

1/4 Inch Standard


3/8 Inch (8 mm) Maximum

3:1(300GH3M 8250 RPM)(400GH3M 5500 RPM)

Standard Lever 300GH3mD;8250;1/4 400GH3mD;5500;1/4

Safety Lever 300GH3mDK;8250;1/4 400GH3mDK;5500;1/4

5:1(300GH5M 6000 RPM)(400GH5M 4000 RPM)



8:1(300GH8M 3750 RPM)(400GH8M 2500 RPM)



S1 Combination Arbor

1"-4" Wide Surface

Conditioning Abrasives

3:1(300GH3M 8250 RPM)(400GH3M 5500 RPM)

Standard Lever 300GH3m;8250;S1 400GH3m;5500;S1

S1 Combination Arbor

1"-4" Wide Surface


4:1(4000 RPM)

Standard Lever 500H1ml;4000;S1

Safety Lever 300GH3mK;8250;S1 400GH3mK;5500;S1 Safety Lever 500H1mK;4000;S1

5:1(300GH5M 6000 RPM)(400GH5M 4000 RPM)


Safety Lever 300GH5mK;6000;S1 400GH5mK;4000;S1

8:1(300GH8M 3750 RPM)(400GH8M 2500 RPM)


Safety Lever 300GH8mK;3750;S1 400GH8mK;2500;S1

T5/8 Mounting Wheels with a 5/8-11 Thread

3:1(300GH3M 8250 RPM)(400GH3M 5500 RPM)

Standard Lever 300GH3m;8250;T5/8 400GH3m;5500;T5/8

T5/8 Mounting Wheels with a 5/8-11 Thread

4:1(4000 RPM)

Standard Lever 500H1ml;4000;T5/8

Safety Lever 300GH3mK;8250;T5/8 400GH3mK;5500;T5/8 Safety Lever 500H1mK;4000;T5/8

5:1(300GH5M 6000 RPM)(400GH5M 4000 RPM)


Safety Lever 300GH5mK;6000;T5/8 400GH5mK;4000;T5/8

8:1(300GH8M 3750 RPM)(400GH8M 2500 RPM)


Safety Lever 300GH8mK;3750;T5/8 400GH8mK;2500;T5/8

7.09 Inch(180.1 mm)

1.5 Inch(38 mm)

7.09 Inch(180.1 mm)

17.1 Inch(434 mm)

1.5 Inch(37 mm)

1.3 Inch(33 mm)

1.3 Inch(33 mm)

1.6 Inch(41 mm)

Aluminum Case

SteelCase

Case Material

Safety Lever

StandardLever

Lever Style

Rear Exhaust

SideExhaust

Exhaust Direction

400GH Series only

HORI

ZONT

AL G

RIND

ERS


HORIZONTAL GRINDERS


Safety Lever Regular Lever

LEVER STYLES FOR 400EH AND 400GEH SERIES TOOLS

Extended Grinders

INFORMATION PAGE


SeriesPower output

50Small Diameter Neck for Narrow Applications • Cone Wheels (3/8-24) – 2 Inch Max.

• Mounted Stones or Burrs 400EH

1.2 H.P. (900 W)

51Rugged Extension and Front End Design

• Cone Wheels (3/8-24) – 2 Inch Max.• Cone Wheels (5/8-11) – 2 Inch Max.

• Mounted Stones or Burrs• 4 Inch Type 1 Wheels

400GEH407GEH

52Heavy Duty Front End Design for Larger Cone or Type 1 Wheels

• Cone Wheels (5/8-11)• 6 Inch Type 1 Wheels

520HGEH 2.0 H.P. (1.5 kW)

53 65HGEH 4.0 H.P. (3.0 kW)

54Extreme Duty Extension Grinder

• Cone Wheels (5/8-11)

65NEH 4.0 H.P. (3.0 kW)

MOUNTING OF WHEELSProper Mounting of

Smaller Type 1 WheelsProper Mounting of

Cone WheelsProper Mounting of Inserted Tooling

(Burrs/Mounted Stones)

Drive Flange Wheel

Outer Wheel Flange

Drive Flange

Wheel

Collet Mounted Abrasiveor Carbide Burr

EXTE

NDED

GRI

NDER

S



Steel Case Material

INFORMATION PAGE

EXHAUST DIRECTION CASE MATERIAL FOR 400EH AND 400GEH SERIES TOOLS




Front Exhaust

Side Exhaust

Rear Exhaust

Operational Extension Length

Overall Length

The “+XX” dimension that is designated in the model number is considered the “Operational Extension Length”. This dimension is the actual length of the extended housing from the front of the motor forward. The operator should use this dimension as a means to judge the length of necessary extension based on the application. This should not be confused with the “Overall Length” which includes the actual length of the motor and handle.

EXTENSION LENGTH

EXTENDED GRINDERS


1.6 Inch(41 mm)

1.0 Inch(25 mm)

Narrow Neck Extended Grinders

Burrs, Mounted Stones & 3/8-24 Cone Wheels

400EH Series

400EHSKD+13;18000;1/4 400EHSK1+13;20000

Safety Lever

SideExhaust

SteelCase

400EH SeriesAlternate Options


1.2 H.P. (900 W)


+7: 4.8 Lbs. (2.2 Kg) +13: 6.0 Lbs. (2.7 Kg)+26: 8.7 Lbs. (3.9 Kg)+36: 10.7 Lbs. (4.8 Kg)


output max. Rated Speed lever Style moDEl numBERwith 7 Inch Extension with 13 Inch Extension with 26 Inch Extension with 36 Inch Extension

ColletER Style Insert Collet

3/8 Inch (8mm) Maximum

20,000 RPMStandard Lever 400EHSD+7;20000;1/4 400EHSD+13;20000;1/4 400EHSD+26;20000;1/4 400EHSD+36;20000;1/4

Safety Lever 400EHSKD+7;20000;1/4 400EHSKD+13;20000;1/4 400EHSKD+26;20000;1/4 400EHSKD+36;20000;1/4

18,000 RPMStandard Lever 400EHSD+7;18000;1/4 400EHSD+13;18000;1/4 400EHSD+26;18000;1/4 400EHSD+36;18000;1/4

Safety Lever 400EHSKD+7;18000;1/4 400EHSKD+13;18000;1/4 400EHSKD+26;18000;1/4 400EHSKD+36;18000;1/4

Cone Wheel3/8-24 Cone Wheel Spindle

20,000 RPMStandard Lever 400EHS1+7;20000 400EHS1+13;20000 400EHS1+26;20000 400EHS1+36;20000

Safety Lever 400EHSK1+7;20000 400EHSK1+13;20000 400EHSK1+26;20000 400EHSK1+36;20000

18,000 RPMStandard Lever 400EHS1+7;18000 400EHS1+13;18000 400EHS1+26;18000 400EHS1+36;18000

Safety Lever 400EHSK1+7;18000 400EHSK1+13;18000 400EHSK1+26;18000 400EHSK1+36;18000

Aluminum Case

SteelCase

Case Material

Abrasive Disk Mounting

+13 Length Shown - Other Lengths Available

overall length+7 : 15.8 Inch (401 mm)

+13 : 21.8 Inch (554 mm)+26 : 34.8 Inch (884 mm)+36 : 42.8 Inch (1080 mm)

operational Extension length+7 : 7.0 Inch (178 mm)

+13 : 13.0 Inch (330 mm)+26 : 26.0 Inch (660 mm)+36 : 36.0 Inch (914 mm)

Safety Lever

StandardLever

Lever Style

Rear Exhaust

SideExhaust

Exhaust Direction

Triple Ball Bearings

Output Spindle

Front of Tool

Other Collet Sizes are Available

EXTE

NDED

GRI

NDER

S


Burrs, Mounted Stones, 3/8-24 Cone Wheels, 5/8-11 Cone Wheels (2" Max.) & 4" Type 1 Wheels

400GEH & 407GEH Series

400GEHSD+15;18000;1/4

400GEHS2+15;18000400GEHS1+15;18000

Standard Lever

SideExhaust

SteelCase

400GEH & 407GEH SeriesAlternate Options


1.2 H.P. (900 W)


+15: 6.8 Lbs. (3.1 Kg) +28: 9.8 Lbs. (4.5 Kg)+38: 12.3 Lbs. (5.6 Kg)


Extended Grinders

output max. Rated Speed lever Style moDEl numBERwith 15 Inch Extension with 28 Inch Extension with 38 Inch Extension

ColletER Style Insert Collet

3/8 Inch (8mm) Maximum

20,000 RPMStandard Lever 400GEHSD+15;20000;1/4 400GEHSD+28;20000;1/4 400GEHSD+38;20000;1/4

Safety Lever 400GEHSKD+15;20000;1/4 400GEHSKD+28;20000;1/4 400GEHSKD+38;20000;1/4

18,000 RPMStandard Lever 400GEHSD+15;18000;1/4 400GEHSD+28;18000;1/4 400GEHSD+38;18000;1/4

Safety Lever 400GEHSKD+15;18000;1/4 400GEHSKD+28;18000;1/4 400GEHSKD+38;18000;1/4


20,000 RPMStandard Lever 400GEHS1+15;20000 400GEHS1+28;20000 400GEHS1+38;20000

Safety Lever 400GEHSK1+15;20000 400GEHSK1+28;20000 400GEHSK1+38;20000








4" Type 1 Wheel3/8-24 Type 1 Wheel

15,000 RPMStandard Lever 407GEHS4+15;15000;401 407GEHS4+28;15000;401 407GEHS4+38;15000;401

Safety Lever 407GEHSK4+15;15000;401 407GEHSK4+28;15000;401 407GEHSK4+38;15000;401

Aluminum Case

SteelCase

Case Material


400GEH25/8-11 Cone Wheel Output

400GEH13/8-24 Cone Wheel Output

400GEHCollet Output

407GEH4Type 1 Wheel Output

400GEH

407GEHS4+15;15000 ;401

1.62 Inch(41.1 mm)


overall length+15 : 23.1 Inch (587 mm)+28 : 36.1 Inch (917 mm)+38 : 46.1 Inch (1174 mm)

operational Extension length+15 : 15.0 Inch (381 mm)+28 : 28.0 Inch (711 mm)+38 : 38.0 Inch (965 mm)

Safety Lever

StandardLever

Lever Style Exhaust Direction

Rear Exhaust

SideExhaust

FrontFlange

Front Bearing Cap

Double Ball Bearing

Output Spindle

Front of Tool

(407GEH models are side exhaust only)

Other Collet Sizes are Available

EXTENDED GRINDERS


1-13/16 InchDiameter

Heavy Duty Front End Design to Accommodate All Cone Wheels

Double Row AngularContact Bearing

Extended Grinders

5/8-11 Cone Wheels & 6" Type 1 Wheels

520HGEH Series Alternate Options



520HGEH Series

520HGEHKCW+38;12000 520HGEHK+38;8000;601

Safety Lever

Side Exhaust

Aluminum Case

2.0 H.P. (1500 W)




output max. Rated Speed lever Style moDEl numBERwith 15 Inch Extension with 28 Inch Extension with 38 Inch Extension


12,000 RPM

Standard Lever 520HGEHlCW+15;12000 520HGEHlCW+28;12000 520HGEHlCW+38;12000

Safety Lever 520HGEHKCW+15;12000 520HGEHKCW+28;12000 520HGEHKCW+38;12000

Spade Handle 520HGEHGCW+15;12000 520HGEHGCW+28;12000 520HGEHGCW+38;12000

6" Type 1 Wheel5/8-11 Type 1 Wheel Spindle

8,000 RPM

Standard Lever 520HGEHl+15;8000;601 520HGEHl+28;8000;601 520HGEHl+38;8000;601

Safety Lever 520HGEHK+15;8000;601 520HGEHK+28;8000;601 520HGEHK+38;8000;601

Spade Handle 520HGEHG+15;8000;601 520HGEHG+28;8000;601 520HGEHG+38;8000;601




520HGEHCW5/8-11 Cone Wheel Output

520HGEHType 1 Wheel Output

Standard Lever Safety Lever Spade Handle

EXTE

NDED

GRI

NDER

S

Additionally Extended Versions(We can assemble extensions together for longer versions - contact us for details)

+15

inch

Sec

tion

+38

inch

Sec

tion


5/8-11 Cone Wheels & 6" Type 1 Wheels

65HGEH Series Alternate Options


Extended Grinders


65HGEH Series

65HGEHKCW+38;8000 65HGEHK+38;8000;601

Safety Lever

Side Exhaust

Aluminum Case

4.0 H.P. (3000 W)




output lever Style moDEl numBERwith 15 Inch Extension with 28 Inch Extension with 38 Inch Extension


Standard Lever 65HGEHlCW+15;8000 65HGEHlCW+28;8000 65HGEHlCW+38;8000

Safety Lever 65HGEHKCW+15;8000 65HGEHKCW+28;8000 65HGEHKCW+38;8000

Spade Handle 65HGEHGCW+15;8000 65HGEHGCW+28;8000 65HGEHGCW+38;8000

6" Type 1 Wheel5/8-11 Type 1 Wheel Spindle

Standard Lever 65HGEHl+15;8000;601 65HGEHl+28;8000;601 65HGEHl+38;8000;601

Safety Lever 65HGEHK+15;8000;601 65HGEHK+28;8000;601 65HGEHK+38;8000;601

Spade Handle 65HGEHG+15;8000;601 65HGEHG+28;8000;601 65HGEHG+38;8000;601




65HGEHCW5/8-11 Cone Wheel Output

65HGEHType 1 Wheel Output


EXTENDED GRINDERS

Additionally Extended Versions(We can assemble extensions together for longer versions - contact us for details)

+15

inch

Sec

tion

+38

inch

Sec

tion


5/8-11 Cone Wheels

65NEH Series Alternate Options

STANDARD EQUIPMENT• Tool • operating instructions and Service manual • Wrench (size based on options)

Extended Grinders


65NEH Series

65nEHKCW+28;8000

Safety Lever

Side Exhaust

Aluminum Case

4.0 H.P. (3000 W)


+28: 24.3 Lbs (11.0 Kg)+38: 28.1 Lbs (12.7 Kg)


output lever Style with 28 Inch Extension with 38 Inch Extension


Standard Lever 65nEHlCW+28;8000 65nEHlCW+38;8000

Safety Lever 65nEHKCW+28;8000 65nEHKCW+38;8000

Spade Handle 65nEHGCW+28;8000 65nEHGCW+38;8000


Extreme Duty Extended Grinder

overall length+28 : 45.7 Inch (1161 mm)+38 : 55.7 Inch (1415 mm)

operational Extension length+28 : 28.0 Inch (711 mm)+38 : 38.0 Inch (965 mm)

65nEHCW5/8-11 Cone Wheel Output


EXTE

NDED

GRI

NDER

S


EXTENDED GRINDERS


Horizontal Die Grinders

INFORMATION PAGE

Page number Application Abrasive Type/Size model Series Power

output mounting of Abrasives

58• Carbide Burrs• Mounted Stones• Flap Wheels• Sanding Abrasives

w/Shank Mounting

300GE307GE

300HGE307HGE

0.7 H.P. (600 W)

59

• Carbide Burrs• Mounted Stones• Flap Wheels• Sanding Abrasives

w/Shank Mounting

(3/8" Shank Size Max.)

400GE400HGE

400GT (collet)400HGE+3400HGE+6

1.2 H.P. (900 W)

60 • Type 1 Wheels

400GT407GT

400GT+3400GT+6

1.2 H.P. (900 W)

61 • Cone Wheels 400GTCW407GTCW

1.2 H.P. (900 W)

62• Flap Wheels• Sanding Abrasives

w/Shank Mounting

(3/8" Shank Size Max.)

300HGE3M300HGE5M300HGE8M

0.7 H.P. (600 W)

400HGE3M400HGE5M400HGE8M

1.2 H.P. (900 W)

63• Flap Wheels• Sanding Abrasives

(5/8" or 1" ID Mount)

300GT3M300GT5M300GT8M

0.7 H.P. (600 W)

See Model Page for Abrasive Mounting Details. 400GT3M

400GT5M400GT8M

1.2 H.P. (900 W)

Outer Wheel Flange

Inner WheelFlange

Wheel

Nut

Drive Flange Wheel

Overhang: 1/2 Inch Max

Mounted Abrasive or Carbide Burr

Collet

Overhang

Overhang: 1/2 Inch Max

Mounted Abrasive or Carbide Burr

Collet

Overhang

Sanding Abrasives Mounted Stones Carbide Burrs Cone Wheels

DIE

GRIN

DERS



Steel Case Material


INFORMATION PAGE

LEVER STYLE

EXHAUST DIRECTION

CASE MATERIAL

Side Exhaust






Rear Exhaust

DIE GRINDERS



300GE6.8 Inch

(173 mm)

307GE7.5 Inch

(191 mm)300HGE7.9 Inch

(201 mm)

307HGE8.6 Inch

(218 mm)

1.5 Inch(37 mm)

1.5 Inch(37 mm)

Die Grinders (Collet Output)

1/4 Inch • 3/8 Inch (6 mm) (8 mm)

300GE Series & 307GE Series 300HGE Series & 307HGE Series

300GE, 307GE, 300HGE & 307HGE Alternate Options

300GEK;30000;1/4

Safety Lever

Rear Exhaust

Aluminum Case


0.7 H.P.(600 W)

300GE: 25 cfm (11.8 L/s) Max307GE: 15 cfm (7.1 L/s) Free Speed 25 cfm (11.8 L/s) Max

1.2 Lbs. (0.5 Kg) Aluminum 1.6 Lbs. (0.7 Kg) Steel


0.7 H.P.(600 W)

300HGE: 25 cfm (11.8 L/s) Max307HGE: 15 cfm (7.1 L/s) Free Speed 25 cfm (11.8 L/s) Max

1.6 Lbs. (0.7 Kg) Aluminum 2.0 Lbs. (0.9 Kg) Steel



Exhaust Direction



Directionmax. Rated



3/8 Inch (8 mm)Maximum

Rear

30,000 RPMStandard Lever 300GE;30000;1/4

Double Front Bearing

ER Style

Insert Collet

3/8 Inch (8 mm)Maximum

Rear

30,000 RPMStandard Lever 300HGER;30000;1/4

Safety Lever 300GEK;30000;1/4 Safety Lever 300HGERK;30000;1/4










Side

30,000 RPMStandard Lever 300HGE;30000;1/4

Safety Lever 300HGEK;30000;1/4







300HGE;30000;1/4

Standard Lever

Side Exhaust

Aluminum Case

Aluminum Case

SteelCase

Case Material

Safety Lever

StandardLever

Lever Style

DIE

GRIN

DERS

The 300GE is available with a front exhaust.

Single Front Bearing Double Front Bearing



6.8 Inch(172 mm)

8.7 Inch(221 mm)

1.6 Inch(41 mm)

1.6 Inch(41 mm)

1/4 Inch • 3/8 Inch (6 mm) (8 mm)

400GE, 400GT & 400HGE Alternate OptionsSTANDARD EQUIPMENT• Tool • operating instructions and Service manual • Wrenches (sizes based on options)

Die Grinders (Collet Output)

400GE Series 400GT Series400HGE Series

Collet Type/

Capacity

Exhaust Direction

max. Rated Speed


Collet Type/

Capacity

Exhaust Direction

max. Rated Speed


Collet Type/

Capacity

Exhaust Direction

max. Rated Speed



3/8 Inch (8 mm)

Maximum

Side

20,000 RPM

Standard 400GES;20000;1/4 Double Front

Bearing


3/8 Inch (8 mm)

Maximum

Side

20,000 RPM

Standard 400HGES;20000;1/4

Bullet Shaped TC-1010 Collet

1/4 Inch Only

Side

20,000 RPM

Standard 400GTS;20000;1/4Safety 400GESK;20000;1/4 Safety 400HGESK;20000;1/4 Safety 400GTSK;20000;1/4

18,000 RPM

Standard 400GES;18000;1/4 18,000 RPM

Standard 400HGES;18000;1/4 18,000 RPM

Standard 400GTS;18000;1/4Safety 400GESK;18000;1/4 Safety 400HGESK;18000;1/4 Safety 400GTSK;18000;1/4

Rear

20,000 RPM

Standard 400GESR;20000;1/4

Rear

20,000 RPM

Standard 400HGESR;20000;1/4

Rear

20,000 RPM

Standard 400GTSR;20000;1/4Safety 400GESRK;20000;1/4 Safety 400HGESRK;20000;1/4 Safety 400GTSRK;20000;1/4

18,000 RPM

Standard 400GESR;18000;1/4 18,000 RPM

Standard 400HGESR;18000;1/4 18,000 RPM

Standard 400GTSR;18000;1/4Safety 400GESRK;18000;1/4 Safety 400HGESRK;18000;1/4 Safety 400GTSRK;18000;1/4

1.2 H.P.(900 W)




1.2 H.P.(900 W)




1.2 H.P.(900 W)





Side Exhaust Side Exhaust

Steel Case Steel Case

Standard LeverRear Exhaust

Steel Case

400HGESR;20000;1/4

400GTS4;20000;1/4400GESK;20000;1/4

7.6 Inch (193 mm)

+6

4.6 Inch (117 mm)

+3

7.3 Inch (185 mm)1.6 Inch (41 mm)

Add +3 or +6 to the model numbers above for extended collet body.

Aluminum Case

SteelCase

Case Material

Safety Lever

StandardLever

Lever Style

Rear Exhaust

SideExhaust

Exhaust Direction

DIE GRINDERS

Front Exhaust option is available on all 400 Series Die Grinders.

Single Front Bearing Double Front Bearing

+3 Inch Extended Output



3 Inch - 4 Inch (75 mm) (100 mm)

400GTKS;18000;301

407GTS;15000;401

Die Grinders (Type 1, Type 1 Cut-Off, Type 41 Wheels)

400GT / 400GT+3 / 400GT+6 Series 407GT Series

1.2 H.P. (900 W)




1.2 H.P.(900 W)

35 cfm (16.5 L/s) Max



Guard/Wheel Size

max. Rated Speed

Exhaust Direction lever Style moDEl numBER Guard/Wheel

Sizemax. Rated

SpeedExhaust

Direction lever Style moDEl numBER

3 Inch (75 mm) 18,000 RPM

SideStandard Lever 400GTS;18000;301

4 Inch (100 mm) 15,000 RPM SideStandard Lever 407GTS;15000;401

Safety Lever 400GTSK;18000;301 Safety Lever 407GTSK;15000;401

RearStandard Lever 400GTSR;18000;301

Safety Lever 400GTSRK;18000;301

Standard Lever

Safety Lever

Steel Case

Steel Case

Side Exhaust

Side Exhaust

7.2 Inch(183 mm)

4.4 Inch (112 mm)

7.5 Inch (191 mm)

8.2 Inch(208 mm)

1.6 Inch(41 mm)

1.6 Inch(41 mm)

Type 1 Wheel400GT & 407GT Alternate OptionsSTANDARD EQUIPMENT• Tool • operating instructions and Service manual • Wrenches (sizes based on options)

+6+3

The +3 & +6 extended output versions of the 400GT are for use with surface conditioning abrasives only.

Add +3 or +6 to the model numbers above for extended output.

Aluminum Case

SteelCase

Case Material

Safety Lever

StandardLever

Lever Style

Rear Exhaust

SideExhaust

Exhaust Direction

DIE GRINDERS DIE

GRIN

DERS




DIE GRINDERS

Die Grinders (3/8-24 Cone Wheels)




400GTCW Series 407GTCW Series

407GTSCW;15000400GTSKCW;18000

6.6 Inch(168 mm)

7.5 Inch(191 mm)

1.6 Inch(41 mm)

1.6 Inch(41 mm)

1.2 H.P. (900 W)




1.2 H.P.(900 W)

35 cfm (16.5 L/s) Max



max. Rated Speed Exhaust Direction lever Style moDEl numBER max. Rated Speed Exhaust Direction lever Style moDEl numBER

18,000 RPM

SideStandard Lever 400GTSCW;18000

15,000 RPM SideStandard Lever 407GTSCW;15000

Safety Lever 400GTSKCW;18000 Safety Lever 407GTSKCW;15000

RearStandard Lever 400GTSRCW;18000

Safety Lever 400GTSRKCW;18000

Cone Wheel Mounting400GTCW & 407GTCW Alternate OptionsSTANDARD EQUIPMENT• Tool • operating instructions and Service manual • Wrenches (sizes based on options)

Aluminum Case

SteelCase

Case Material

Safety Lever

StandardLever

Lever Style

Rear Exhaust

SideExhaust

Exhaust Direction

DIE

GRIN

DERS


9.4 Inch(239 mm)

9.1 Inch(231 mm)

1.5 Inch(37 mm)

1.6 Inch(41 mm)

Geared Die Grinders (Collet Output)

300HGE(X)M Series 400HGE(X)M Series

300HGE3mRK;8250;1/4 400HGE3m;5500;1/4

Aluminum Case

0.7 H.P.(600 W)

25 cfm (11.8 L/s) Max



1.2 H.P.(900 W)





Rear Exhaust(only)

Aluminum Case

Side Exhaust

1/4 Inch • 3/8 Inch (6 mm) (8 mm)

300HGE(X)M & 400HGE(X)M Alternate OptionsSTANDARD EQUIPMENT• Tool • operating instructions and Service manual • Wrenches (sizes based on options)


Aluminum Case

SteelCase

Case Material

Safety Lever

StandardLever

Lever Style

Rear Exhaust

SideExhaust

Exhaust Direction

DIE

GRIN

DERS

(400HGE(X)M Only)

300HGE(X)m SeriesmoDEl numBER

400HGE(X)m SeriesmoDEl numBERoutput Gear Ratio/max. Rated Speed Exhaust Direction lever Style

Double Front BearingER Style Insert Collet

3/8 Inch (8 mm) Maximum

3:1 300HGE3M - 8250 RPM 400HGE3M - 5500 RPM

Side ExhaustStandard Lever 400HGE3m;5500;1/4

Safety Lever 400HGE3mK;5500;1/4

Rear ExhaustStandard Lever 300HGE3mR;8250;1/4 400HGE3mR;5500;1/4

Safety Lever 300HGE3mRK;8250;1/4 400HGE3mRK;5500;1/4

5:1 300HGE5M - 6000 RPM400HGE5M - 4000 RPM





8:1 300HGE8M - 3750 RPM400HGE8M - 2500 RPM






Standard Lever

Safety Lever

Side Exhaust

Rear Exhaust(only) Aluminum Case

Aluminum Case

Geared Die Grinders for Surface Conditioning Abrasives

300GT(X)M Series 400GT(X)M Series

400GT3m;5500;S1300GT3mK;8250;T5/8

10.3 Inch(262 mm)

12.2 Inch(310 mm)


(41 mm)

0.7 H.P.(600 W)

25 cfm (11.8 L/s) Max



1.2 H.P.(900 W)

35 cfm (16.5 L/s) Max



Sanding Abrasive Mounting300GT(X)M & 400GT(X)M Alternate OptionsSTANDARD EQUIPMENT• Tool • operating instructions and Service manual • Wrenches (sizes based on options)

Aluminum Case

SteelCase

Case Material

Safety Lever

StandardLever

Lever Style

Rear Exhaust

SideExhaust

Exhaust Direction

DIE GRINDERS

(400GT(X)M Only)

300GT(X)m SeriesmoDEl numBER

400GT(X)m SeriesmoDEl numBERoutput Gear Ratio/max. Rated Speed Exhaust Direction lever Style

S1 Combination Arbor 1" - 4" Wide Surface


3:1 300GT3M: 8250 RPM400GT3M: 5500 RPM

Side Exhaust Standard Lever 400GT3m;5500;S1Safety Lever 400GT3mK;5500;S1

Rear Exhaust Standard Lever 300GT3mR;8250;S1 400GT3mR;5500;S1Safety Lever 300GT3mRK;8250;S1 400GT3mRK;5500;S1

5:1 300GT5M: 6000 RPM400GT5M: 4000 RPM



8:1 300GT8M: 3750 RPM400GT8M: 2500 RPM



T5/8 Mounting Wheels That Have a 5/8-11 Thread

3:1 300GT3M: 8250 RPM400GT3M: 5500 RPM

Side Exhaust Standard Lever 400GT3m;5500;T5/8Safety Lever 400GT3mK;5500;T5/8

Rear Exhaust Standard Lever 300GT3mR;8250;T5/8 400GT3mR;5500;T5/8Safety Lever 300GT3mRK;8250;T5/8 400GT3mRK;5500;T5/8

5:1 300GT5M: 6000 RPM400GT5M: 4000 RPM



8:1 300GT8M: 3750 RPM400GT8M: 2500 RPM




Air Drills

INFORMATION PAGE

Page number model number Power maximum operating

Speed Description

66 300D(X)M

400D(X)M

0.7 HP (600 W)

1.2 HP (900 W)

825-8250 RPM

550-5500 RPM

Inline Drills

67

400D(X)MP 1.2 HP (900 W) 550-5500 RPM

500D2M 1.5 HP (1.1 kW) 1000 RPM

68

300DRA(X)M

0.7 HP (600 W) 390-4000 RPM

Right Angle Drills

300DRAE(X)M

400DRA(X)M

1.2 HP (900 W) 260-2900 RPM

400DRAE(X)M

69

400FD(X)M 1.2 HP (900 W) 550-5500 RPM

Floor Drills

500FD1M 1.5 HP (1.1 kW) 4000 RPM

DRIL

LS



INFORMATION PAGE

EXTENDED NECK VS STANDARD

EXHAUST DIRECTION

CASE MATERIAL LEVER STYLE

Standard Style Right Angle Drill

Rear Exhaust

Side Exhaust

Front Exhaust

Extended Neck Right Angle Drill


Steel Case Material

The choice of case material af-fects the weight and durability of the tool. By it's nature, aluminum is lighter in weight than steel. Steel is more durable in aggres-sive environments.





DRILLS


3/5/8: 10.0 Inch (254 mm)21/36: 10.5 Inch (267 mm)

3/5/8: 10.5 Inch (267 mm)21/36: 11.0 Inch (279 mm)

1.5 Inch(37 mm)

1.6 Inch(41 mm)

Inline Air Drills

300D(X)M Series 400D(X)M Series

400D3mK;5500;D1/2300D3mK;8250;D3/8

300D(X)M & 400D(X)M Seris Alternate Options

Safety Lever

Safety Lever

Rear Exhaust

Side Exhaust


STANDARD EQUIPMENT• Tool • operating instructions and Service manual

0.7 H.P.(600 kW)

25 cfm (11.8 L/s) Max

3/5/8: 3.2 Lbs. (1.4 Kg) 21/36: 3.4 Lbs (1.5 Kg)


1.2 H.P.(900 W)

35 cfm (16.5 L/s) Max

3/5/8: 4.1 Lbs. (1.9 Kg) 21/36: 4.3 Lbs (1.9 Kg)


300 SeriesmoDEl numBER

400 SeriesmoDEl numBERoutput Gear Ratio/Rated Speed lever Style

300 Series: 3/8" (10 mm) Drill Chuck400 Series: 1/2" (13 mm) Drill Chuck

3:1 300 Series: 8250 RPM 400 Series: 5500 RPM

Standard Lever 300D3m;8250;D3/8 400D3m;5500;D1/2Safety Lever 300D3mK;8250;D3/8 400D3mK;5500;D1/2









3/8 or 1/2 Inch Drill Chuck (10 mm or 13 mm)

Aluminum Case

SteelCase

Case Material

Safety Lever

RegularLever

Lever Style

WARNING: Follow all recommendations from component and inserted tooling manufacturers for speeds and proper usage.

DRIL

LS


3/5/8: 9.2 Inch (234 mm)21/36: 9.7 Inch (246 mm)

18.5 Inch(470 mm)

6.1 Inch(155 mm)

2.3 Inch(58 mm)


400D(X)MP Series 500D2M Series

400D3mP;5500;D1/2 500D2m;1000;D3/4


1.2 H.P.(900 W)


3/5/8: 4.4 Lbs. (2.0 Kg) 21/36: 4.6 Lbs (2.1 Kg)


1.5 H.P.(1125 W)

35 cfm (16.5 L/s) Max

11.0 Lbs. (5.0 Kg) 1/2" NPT Inlet1/2" (13mm) Hose Size

Pistol Grip Air Drills

output Gear Ratio / Rated Speed moDEl numBER output Gear Ratio / Rated Speed moDEl numBER

1/2" (13 mm) Drill Chuck

3:1 / 5500 RPM 400D3mP;5500;D1/2 1/2" (13 mm) Drill Chuck16:1 / 1000 RPM

500D2m;1000;D1/2

5:1 / 4000 RPM 400D5mP;4000;D1/2 3/4" (19 mm) Drill Chuck 500D2m;1000;D3/4

8:1 / 2500 RPM 400D8mP;2500;D1/2

21:1 / 900 RPM 400D21mP;900;D1/2

36:1 / 550 RPM 400D36mP;550;D1/2

Pistol

Exhaust


DRILLS


3/5/8: 9.1 Inch (231 mm)21/36: 9.6 Inch (244 mm)

3/5/8: 8.9 Inch (226 mm)21/36: 9.4 Inch (239 mm)

3/5/8: 12.1 Inch (307 mm)21/36: 12.6 Inch (320 mm)

3/5/8: 12.8 Inch (325 mm)21/36: 13.3 Inch (338 mm)

4.5 Inch(114 mm)

5.3 Inch(135 mm)

4.5 Inch(114 mm)

5.3 Inch(135 mm)

1.5 Inch(37 mm)

1.6 Inch(41 mm)

1.5 Inch(37 mm)

1.6 Inch(41 mm)

Right Angle Drills

300DRA(X)M & 300DRAE(X)M Series 400DRA(X)M & 400DRAE(X)M Series

300DRA(X)M, 300DRAE(X)M, 400DRA(X)M, 400DRAE(X)M Series Alternate OptionsSTANDARD EQUIPMENT• Tool • operating instructions and Service manual

0.7 H.P.(600 kW)

25 cfm (11.8 L/s) Max

3/5/8: 3.7 Lbs. (1.7 Kg): Short 21/36: 3.9 Lbs (1.8 Kg): Short3/5/8: 4.3 Lbs. (1.9 Kg): Extended 21/36: 4.5 Lbs (2.0 Kg): Extended


1.2 H.P.(900 W)

35 cfm (16.5 L/s) Max

3/5/8: 4.5 Lbs. (2.0 Kg): Short 21/36: 4.7 Lbs (2.1 Kg): Short3/5/8: 5.1 Lbs. (2.3 Kg): Extended 21/36: 5.3 Lbs (2.4 Kg): Extended


400DRA3m300DRA3m

300DRAE3m 400DRAE3m


300DRA(X)mmoDEl numBER

300DRAE(X)mmoDEl numBER

400DRA(X)mmoDEl numBER

400DRAE(X)mmoDEl numBERoutput Gear Ratio/Rated Speed lever Style

300 Series 3/8" (10 mm) Drill Chuck

400 Series 1/2" (13 mm) Drill Chuck


Standard Lever 300DRA3m;4000;D3/8 300DRAE3m;4000;D3/8 400DRA3m;2900;D1/2 400DRAE3m;2900;D1/2Safety Lever 300DRA3mK;4000;D3/8 300DRAE3mK;4000;D3/8 400DRA3mK;2900;D1/2 400DRAE3mK;2900;D1/2









300DRA3mK;4000;D3/8 400DRA3mK;2900;D1/2300DRAE3mK;4000;D3/8 400DRAE3mR;2900;D1/2

Safety LeverSafetyLever


Rear Exhaust

Side Exhaust

Rear Exhaust

Aluminum Case

SteelCase

Case Material

Safety Lever

StandardLever

Lever Style


DRIL

LS




400FD(X)M Series 500FD1M Series

400FD3ml;5500;D1/2;P15 500FD1ml;4000;D1/2;P15

1.2 H.P.(900 W)


3/5/8: 8.3 Lbs. (3.8 Kg) 21/36: 8.5 Lbs (3.8 Kg)


1.5 H.P.(1125 W)

35 cfm (16.5 L/s) Max

10.8 Lbs (4.9 Kg) 1/2" NPT Inlet1/2" (13mm) Hose Size

Floor Drills

output Gear Ratio / Rated Speed lever Style moDEl numBER output Gear Ratio / Rated Speed moDEl numBER

1/2" (13 mm)Drill Chuck

3:1 / 5500 RPMStandard Lever 400FD3m;5500;D1/2;P15

1/2" (13 mm) Drill Chuck 4:1 / 4000 RPM 500FD1ml;4000;D1/2;P15Safety Lever 400FD3mK;5500;D1/2;P15


Safety Lever 400FD5mK;4000;D1/2;P15







Standard Lever

1/2" Black Pipe

20.5 Inch(521 mm)

3/5/8: 28.5 Inch (724 mm)21/36: 29.0 Inch (737 mm)

3/5/8: 10.4 Inch (264 mm)21/36: 10.9 Inch (277 mm)

1/2" Black Pipe

Standard Lever

20.5 Inch(521 mm)

28.1 Inch(714 mm)

12.0 Inch(305 mm)


DRILLS


Belt Sander

300BL/K


0.7 H.P.(600 kW)

25 cfm (11.8 L/s) Max


6.8 Inch(173mm)

5.4 Inch(137mm)

Standard Lever

Front Exhaust to Cool the Belt

Belt Capacity max. SFPm lever Style model number

5/8 or 3/4 Inch X 18 Inch 5700 SFPMStandard Lever 300Bl

Safety Lever 300BK

BELT

SAN

DER

• BE

NCH

GRIN

DER

• AB

RASI

VE C

UTTI

NG T

OOLS

The 300B Series is offered in a version with a 4550 Max SFPM.


66BVG


4.0 H.P.(3000 W)

25 cfm (11.8 L/s) Free75 cfm (35.4 L/s) Max

51.0 Lbs (23.0 Kg) 1/2" NPT Inlet1/2" (13mm) Hose Size

Bench Grinder

moDEl numBER

66BVG;6000;9

11.4 Inch289.4 mm

6.0 Inch152.4 mm

13.4 Inch340.4 mm

Adjustable Spark Arrestor

Adjustable Work Rest

BELT SANDER • BENCH GRINDER • ABRASIVE CUTTING TOOLS


Abrasive Cutting Tools


4.0 H.P.(3000 W)

25 cfm (11.8 L/s) Free75 cfm (35.4 L/s) Max

65VBW: 23.9 Lbs. (10.8 Kg) 662VBW: 28.3 Lbs. (12.8 Kg)


Guard Size Spindle Type operating Speed moDEl numBER Guard Size Spindle Type operating Speed moDEl numBER

9 Inch 5/8-11 6000 RPM 65VBW;6000;941

12 Inch1" Spline

5000 RPM 65VBW;5000;1241 12 Inch1" Spline 3300 RPM

662VBW;3300;1241

14 Inch 4000 RPM 65VBW;4000;1441 14 Inch 662VBW;3300;1441

Reinforced Type 1 Cut-Off Wheel (Type 41) Diamond Wheel

Wet Cutting Attachment

Depth of Cut

Model NumberGuard Size

9 Inch (230mm) 12 Inch (300mm) 14 inch (360mm)

65VBW 2.5 Inch (64mm) 3.3 Inch (84mm)

4.3 Inch (109mm)662VBW N/A

65VBW;5000;12 662VBW;3300;14

17.5 Inch (445 mm)

20.0 Inch (508 mm)

12.0 Inch (305 mm) 7.09 Inch

(180.1 mm)

9.5 Inch (241 mm)

10.0 Inch (254 mm)

BELT

SAN

DER

• BE

NCH

GRIN

DER

• AB

RASI

VE C

UTTI

NG T

OOLS

Dimensions shown are for 12" guard. Other guards vary slightly. Dimensions shown are for 14" guard. Other guards vary slightly.


BELT SANDER • BENCH GRINDER • ABRASIVE CUTTING TOOLS


Scalers & Needle Scalers

INFORMATION PAGE

SCAlERSPage number Tool Configuration model Series

75• 1/2 Square Style Chisel TC-1

• 1/4 Octagon Style Chisel TC-182

nEEDlE SCAlERSPage number Tool Configuration model Series

76• 1/2 Square Style Chisel TC-1-N

• 1/4 Octagon Style Chisel TC-182-N

HANDLES

Chipping HammersCHiPPinG HAmmERS

Page number Tool Configuration model Series

77

• 0.401 Round Shank Chisel

• 0.371 Hex Shank Chisel

80 Series

• 0.680 Round Shank Chisel

• 0.580 Hex Shank Chisel

TC-183

(W) Pistol Grip (l) lever (P) Push (FT) Flow Through

80 Series TC-183 Series

Beehive Retainer Chisel RetainerSpring/Beehive Retainer

Tool Nose (Hex or Round)

Chisel

Tool Nose (Hex or Round) Lock Spring

Chisel

METHODS OF CHISEL RETENTION

PERC

USSI

VE T

OOLS


Scalers

Standard lever Safety lever Push Handle Pistol Handle Flow Through Handle

9.4 Inch (239 mm)

9.1 Inch (231 mm)

1.7 Inch (43mm)

1.7 Inch (43mm)

TC-1 Series TC-182 Series

TC-1-l TC-182-l

Spring Style Chisel RetainerCollar Style Chisel Retainer

Chisel Type Handle Type moDEl numBER Chisel Type Handle Type moDEl numBER

1/2" Square

Lever TC-1-l

1/4" octagon

Lever TC-182-lSafety Lever TC-1-K Safety Lever TC-182-K

Push TC-1-P Push TC-182-PPistol TC-1-W Pistol TC-182-W

Flow Through TC-1-FT Flow Through TC-182-FTPipe-Extended Lever TC-1-Fl;Pl48 Pipe-Extended Lever TC-182-Fl;Pl48

Description Cutting Edge overall length Part numberNarrow Flat Chisel 3/4" (19mm) 7" (178mm) 839051Narrow Flat Chisel 3/4" (19mm) 12" (305mm) 839341Narrow Flat Chisel 3/4" (19mm) 18" (457mm) 839335Wide Angle Chisel 1 3/8" (34.9mm) 7" (178mm) 839050Wide Angle Chisel 1 3/8" (34.9mm) 12" (305mm) 839299Wide Angle Chisel 1 3/8" (34.9mm) 18" (457mm) 839334

Blank Chisel 7" (178mm) 839052Blank Chisel 12" (305mm) 839053Blank Chisel 18" (457mm) 839054Wide Chisel 1 3/8" (34.9mm) 7" (178mm) 839467Wide Chisel 1 3/8" (34.9mm) 12" (305mm) 839469

2 Inch Wide Scraper 2" (50.8mm) 7" (178mm) 839468Other Sizes And Styles Available

Description Cutting Edge overall length Part numberNarrow Flat Chisel 3/4" (19mm) 7" (17.8cm) 839601Narrow Flat Chisel 3/4" (19mm) 12" (30.5cm) 839601-12

Blank Chisel 7" (17.8cm) 839605Blank Chisel 12" (30.5cm) 839605-12Wide Chisel 1 3/8" (34.9mm) 7" (17.8cm) 839602

Wide Angle Chisel 1 3/8" (34.9mm) 7" (17.8cm) 839604Wide Angle Chisel 1 3/8" (34.9mm) 12" (30.5cm) 839604-12

Other Sizes And Styles Available

Chisels – 1/2 Inch Square Shank Chisels – 1/4 Inch Octagon

Floor ScraperTC-1-Fl;Pl48

4.3 Lbs. (1.9 Kg)

4.2 Lbs. (1.9 Kg)

4650 4000

1/4" NPT Inlet3/8" (10 mm) Hose Size20 cfm (9.4 L/s)1 Inch X 1.1 Inch

(25mm X 29mm)

SCALING HAMM

ERS


Needle Scalers

17.2 Inch (437mm)

16.6 Inch (422mm)

1.9 Inch (48 mm)

1.9 Inch (48 mm)

TC-1 Series TC-182 Series

TC-1-nl TC-182-nl

Handle Type moDEl numBER Handle Type moDEl numBER

Lever TC-1-nl Lever TC-182-nl

Safety Lever TC-1-nK Safety Lever TC-182-nK

Push TC-1-nP Push TC-182-nP

Pistol TC-1-nW Pistol TC-182-nW

4650 4000

6.4 Lbs. (2.9 Kg) 1/4" NPT Inlet3/8" (10 mm) Hose Size20 cfm (9.4 L/s)1 Inch X 1.1 Inch

(25mm X 29mm)

NEED

LE S

CALE

RS

Description Cutting Edge overall length Part numberNarrow Flat Chisel 3/4" (19mm) 7" (178mm) 839051Narrow Flat Chisel 3/4" (19mm) 12" (305mm) 839341Narrow Flat Chisel 3/4" (19mm) 18" (457mm) 839335Wide Angle Chisel 1 3/8" (34.9mm) 7" (178mm) 839050Wide Angle Chisel 1 3/8" (34.9mm) 12" (305mm) 839299Wide Angle Chisel 1 3/8" (34.9mm) 18" (457mm) 839334

Blank Chisel 7" (178mm) 839052Blank Chisel 12" (305mm) 839053Blank Chisel 18" (457mm) 839054Wide Chisel 1 3/8" (34.9mm) 7" (178mm) 839467Wide Chisel 1 3/8" (34.9mm) 12" (305mm) 839469

2 Inch Wide Scraper 2" (50.8mm) 7" (178mm) 839468Other Sizes And Styles Available

Description Cutting Edge overall length Part numberNarrow Flat Chisel 3/4" (19mm) 7" (17.8cm) 839601Narrow Flat Chisel 3/4" (19mm) 12" (30.5cm) 839601-12

Blank Chisel 7" (17.8cm) 839605Blank Chisel 12" (30.5cm) 839605-12Wide Chisel 1 3/8" (34.9mm) 7" (17.8cm) 839602

Wide Angle Chisel 1 3/8" (34.9mm) 7" (17.8cm) 839604Wide Angle Chisel 1 3/8" (34.9mm) 12" (30.5cm) 839604-12


Chisels – 1/2 Inch Square Shank Chisels – 1/4 Inch Octagon

Standard lever Safety lever Push Handle Pistol Handle Flow Through Handle


0.9 Inch X 3.0 Inch(23mm X 76mm)

5.5 Lbs. (2.5 Kg)

25 cfm (11.8 L/s) Max


Chipping Hammers

7.3 Inch (185 mm)

1.6 Inch (41 mm)

12.2 Inch (310 mm)

1.6 Inch (41 mm)

80 Series TC-183 Series

80-l TC-183-l

PistolHandle

PistolHandle

Standard Lever Standard Lever

0.6 Inch X 1.4 Inch(15mm X 36mm)

2.8 Lbs. (1.3 Kg)

15 cfm (7.1 L/s)


Handle Type Handle Type moDEl numBER Handle Type Handle Type moDEl numBER

0.371 Hex Shank Lever 80l;HEX0.580 Hex Shank

Lever TC-183-l;HEXSafety Lever 80K;HEX Safety Lever TC-183-K;HEX

Pistol 80W;HEX Push TC-183-P;HEX

0.401 Round Shank Lever 80l;RnD Pistol TC-183-W;HEXSafety Lever 80K;RnD

0.680 Round ShankLever TC-183-l;RnD

Pistol 80W;RnD Safety Lever TC-183-K;RnDPush TC-183-P;RnDPistol TC-183-W;RnD

Standard lever Safety lever

Push Handle Flow Through Handle

Handle Types

Pistol Handle

TC 183 Series only TC 183 Series only

Description Cutting Edge overall length Part numberFlat Chisel 1/2" (12.7mm) 7" (178mm) 595002

Blank Chisel 7" (178mm) 595005Other Sizes And Styles Available

Description Cutting Edge overall length Part numberFlat Chisel 1/2" (12.7mm) 12" (305mm) 595016


Chisels – 0.401 Round

Chisels – 0.371 Hexagon

Description Cutting Edge overall length Part numberFlat Chisel 1" (25.4mm) 9" (229cm) 839008Flat Chisel 1" (25.4mm) 12" (30.5cm) 839009Flat Chisel 1" (25.4mm) 18" (457cm) 839010Moil Point 9" (229cm) 839018Wide Flat 2" (50.8mm) 12" (30.5cm) 839016


Description Cutting Edge overall length Part numberFlat Chisel 1" (25.4mm) 9" (229cm) 839014Flat Chisel 1" (25.4mm) 12" (30.5cm) 839083Flat Chisel 1" (25.4mm) 18" (457cm) 839045Moil Point 9" (229cm) 839023Wide Flat 1.5" (38.1mm) 9" (229cm) 839019Wide Flat 2" (50.8mm) 9" (229cm) 839017


Chisels – 0.580 Hexagon

Chisels – 0.680 Round

CHIPPING HAMM

ERS


Motors

INFORMATION PAGE

300 SERIES MOTORS• 0.7 H.P.• 150-30000 Speed Range


500 & 520 SERIES MOTORS• 1.5 and 2.0 H.P.• 125-4000 Speed Range


Top Cat Air Motors

79

80

81

82

MOT

ORS


Motors

0.7 H.P. Motors

Round Housing Flange and Base Mounting

Output Gear RatioRPM Stall Torque

Weight MODEL NUMBER MODEL NUMBERat Max H.P. Free Speed ft. lbs. Nm

1/2 Inch Keyed

3:1 4125 8250 2.6 3.5

2.50 Lbs. (1.13 Kg)

300H3MSFT;8250;K500 300H3MSBRFT;8250;K500

5:1 3000 6000 3.5 4.8 300H5MSFT;6000;K500 300H5MSBRFT;6000;K500

8:1 1875 3750 5.8 7.9 300H8MSFT;3750;K500 300H8MSBRFT;3750;K500

21:1 650 1300 16.0 21.85.00 Lbs. (2.27 Kg)

300H21MSFT;1300;K500 300H21MSBRFT;1300;K500

36:1 400 800 26.7 36.3 300H36MSFT;800;K500 300H36MSBRFT;800;K500

98:1 150 300 73.7 99.87.50 Lbs. (3.39 Kg)

300H98MSFT;300;K500 300H98MSBRFT;300;K500

164:1 75 150 123.2 167.0 300H164MSFT;150;K500 300H164MSBRFT;150;K500

1/2 X 20 Threaded

3:1 4125 8250 2.6 3.5

2.46 Lbs. (1.11 Kg)

300H3MSFT;8250;T520 300H3MSBRFT;8250;T520

5:1 3000 6000 3.5 4.8 300H5MSFT;6000;T520 300H5MSBRFT;6000;T520

8:1 1875 3750 5.8 7.9 300H8MSFT;3750;T520 300H8MSBRFT;3750;T520

21:1 650 1300 16.0 21.84.76 Lbs. (2.16 Kg)

300H21MSFT;1300;T520 300H21MSBRFT;1300;T520

36:1 400 800 26.7 36.3 300H36MSFT;800;T520 300H36MSBRFT;800;T520

98:1 150 300 73.7 99.86.69 Lbs. (3.03 Kg)

300H98MSFT;300;T520 300H98MSBRFT;300;T520

164:1 75 150 123.2 167.0 300H164MSFT;150;T520 300H164MSBRFT;150;T520

Collet

1:1 15000 30000 0.8 1.11.80 Lbs. (0.82 Kg)

300HGESFT;30000;1/4

1:1 12500 25000 0.8 1.1 300HGESFT;25000;1/4

1:1 9000 18000 0.8 1.1 2.55 Lbs. (1.16 Kg) 307HGESFT;18000;1/4

3:1 4125 8250 2.6 3.5

2.57 Lbs. (1.16 Kg)

300HGE3MSFT;8250;1/4 300HGE3MSBRFT;8250;1/4

5:1 3000 6000 3.5 4.8 300HGE5MSFT;6000;1/4 300HGE5MSBRFT;6000;1/4


21:1 650 1300 16.0 21.84.87 Lbs. (2.21 Kg)



98:1 150 300 73.7 99.87.17 Lbs. (3.24 Kg)



300HGESFT

300H(X)MSFT

300H(X)MSBRFT

MOTORS

0.34 Inch0.88 Inch

1.70 Inch

1.03 Inch

3/5/8: 7.32 Inch21/36: 7.84 Inch

96/164: 8.36 Inch

2.91 Inch

1.41 Inch

2.25 Inch

0.22 Inch

0.69 Inch

0.75 Inch1/2-20 Thread

2.00 Inch2.50 Inch

1.75 Inch

∅ 0.275 Inch

1.13 Inch

2.13 Inch

1.69 Inch

0.16 Inch0.38 Inch

0.34 Inch

0.5 Inch

0.125 Inch+.002/-.000

∅ 0.5 Inch+.000/-.001

∅ 1.6 Inch ±.0003

∅ 0.391 Inch 0.50 Countersink.255 Through 4 Places

1.61

1/4" NPT Air Inlet

0.19 Inch

Note: The Flange & Base Mounting option adds 1.22 Lbs. (0.55 Kg) to weight


1.2 H.P. Motors

Motors

Round Housing Flange and Base mounting

output Gear RatioRPm Stall Torque

Weight moDEl numBER moDEl numBERat max H.P. Free Speed ft. lbs. nm

1/2 Inch Keyed

3:1 2250 5500 4.6 6.3

3.23 Lbs. (1.46 Kg)

400H3mSFT;5500;K500 400H3mSBRFT;5500;K500

5:1 2000 4000 6.2 8.4 400H5mSFT;4000;K500 400H5mSBRFT;4000;K500

8:1 1250 2500 10.3 14.0 400H8mSFT;2500;K500 400H8mSBRFT;2500;K500

21:1 450 900 28.4 38.65.53 Lbs. (2.51 Kg)

400H21mSFT;900;K500 400H21mSBRFT;900;K500

36:1 275 550 47.5 64.6 400H36mSFT;550;K500 400H36mSBRFT;550;K500

98:1 100 200 131.1 177.77.83 Lbs. (3.54 Kg)

400H98mSFT;200;K500 400H98mSBRFT;200;K500

164:1 60 120 219.1 297.1 400H164mSFT;120;K500 400H164mSBRFT;1200;K500

1/2 X 20 Threaded

3:1 2250 5500 4.6 6.3

3.12 Lbs. (1.41 Kg)

400H3mSFT;5500;T520 400H3mSBRFT;5500;T520

5:1 2000 4000 6.2 8.4 400H5mSFT;4000;T520 400H5mSBRFT;4000;T520

8:1 1250 2500 10.3 14.0 400H8mSFT;2500;T520 400H8mSBRFT;2500;T520

21:1 450 900 28.4 38.65.37 Lbs. (2.43 Kg)

400H21mSFT;900;T520 400H21mSBRFT;900;T520

36:1 275 550 47.5 64.6 400H36mSFT;550;T520 400H36mSBRFT;550;T520

98:1 100 200 131.1 177.77.62 Lbs. (3.44 Kg)

400H98mSFT;200;T520 400H98mSBRFT;200;T520

164:1 60 120 219.1 297.1 400H164mSFT;120;T520 400H164mSBRFT;120;T520

Collet

1:1 10000 20000 1.3 1.82.53 Lbs. (1.15 Kg)

400HGESFT;20000;1/4

1:1 9000 18000 1.3 1.8 400HGESFT;18000;1/4

1:1 7500 15000 1.3 1.82.67 Lbs. (1.21 Kg)

407HGESFT;15000;1/4

1:1 6000 12000 1.3 1.8 407HGESFT;12000;1/4

3:1 2250 5500 4.6 6.3

3.30 Lbs. (1.49 Kg)

400HGE3mSFT;5500;1/4 400HGE3mSBRFT;5500;1/4

5:1 2000 4000 6.2 8.4 400HGE5mSFT;4000;1/4 400HGE5mSBRFT;4000;1/4


21:1 450 900 28.4 38.65.55 Lbs. (2.51 Kg)



98:1 100 200 131.1 177.77.77 Lbs. (3.52 Kg)



400HGESFT

400H(X)mSFT

400H(X)mSBRFT

MOT

ORS

0.32 Inch

∅ 0.5 Inch

0.88 Inch

1.67 Inch

1.01 Inch 0.32 Inch

0.5 Inch

0.125 Inch

0.19 Inch

2.50 Inch

1.75 Inch

∅ 0.257 Inch

1.13 Inch

2.13 Inch

3/5/8: 7.66 Inch21/36: 8.18 Inch

98/164: 8.70 Inch

2.91 Inch

1.41 Inch

2.25 Inch0.20 Inch0.38 Inch

0.75 Inch

2.00 Inch

0.16 Inch0.69 Inch 1.74 3/8" NPT

Air Inlet

Note: The Flange & Base Mounting option adds 1.22 Lbs. (0.55 Kg) to weight


Motors

500 Series Motors


Weight moDEl numBERat max H.P. Free Speed ft. lbs. nm

3/4 Inch Keyed

4:1 2000 4000 7.3 9.9 6.58 Lbs. (2.98 Kg) 500H1mFT;4000;K750

16:1 500 1000 29.3 39.8 8.18 Lbs. (3.71 Kg) 500H2mFT;1000;K750

64:1 125 250 117.3 159.9 9.78 Lbs. (4.43 Kg) 500H3mFT;250;K750

5/8 X 11 Threaded

4:1 2000 4000 7.3 9.9 6.15 Lbs. (2.79 Kg) 500H1mFT;4000;T625

18:1 500 1000 29.3 39.8 7.75 Lbs. (3.51 Kg) 500H2mFT;1000;T625

64:1 125 250 117.3 159.9 9.35 Lbs. (4.24 Kg) 500H3mFT;250;T625

500H1mFT;T625500H1mFT;K750 500H2mFT;T625

520 Series Motors

520H1mFT ;K750 520H2mFT;T625



3/4 Inch Keyed

4:1 1500 3000 14.7 20.0 8.47 Lbs. (3.84 Kg) 520H1mFT;3000;K750

16:1 375 750 58.7 79.8 10.07 Lbs. (4.56 Kg) 520H2mFT;750;K750

64:1 90 180 234.7 319.2 11.67 Lbs. (5.29 Kg) 500H3mFT;180;K750

5/8 X 11 Threaded

4:1 1500 3000 14.7 20.0 8.04 Lbs. (3.64 Kg) 520H1mFT;3000;T625

16:1 375 750 58.7 79.8 9.64 Lbs. (4.37 Kg) 520H2mFT;750;T625

64:1 90 180 234.7 319.2 11.24 Lbs. (5.09 Kg) 500H3mFT;180;T625

MOTORS

3/4 Inch Keyed

3/4 Inch Keyed

5/8 X 11 Threaded

1/2 Inch NPT Inlet

1/2 Inch NPT Inlet

5/8 X 11 Threaded

1 Stage: 8.355 Inch2 Stage: 10.000 Inch3 Stage: 11.645 Inch

1 Stage: 10.066 Inch2 Stage: 11.711 Inch3 Stage: 13.356 Inch

3.103 Inch

3.103 Inch

2.633 Inch

2.633 Inch

2.500 Inch(Reference Only)

2.900 Inch(Reference Only)

2.250 Inch

2.250 Inch


Motors

664 Series Motors



3/4 Inch Keyed10:1 425 850 73.2 99.2 15.08 Lbs. (6.83 Kg) 664H1mFT;850;K1

100:1 42 85 720.3 976.6 22.89 Lbs. (10.37 Kg) 664H2mFT;85;K1

664H1mFT 664H2mFT;T625

MOT

ORS

10.94 Inch

15.04 Inch1.50 Inch

4.25 Inch

4.22 Inch

3.40 Inch

2.77 Inch

3.40 Inch2.77 Inch

0.12 Inch

3/8-16 Cap Screw

∅ .9980 Inch±.0004

.250 Inch+.002 -.000

664H1mFT

664H2mFT;K1


MOTORS


Sanding Pads

ACCESSORIES

SANDING PADS FOR VERTICAL SANDERSmodel Size Part number max. Rated Speed

520V7 Inch 849913 8500 RPM

9 Inch 849914 6500 RPM

56S7 Inch 849913 8500 RPM

9 Inch 849914 6500 RPM

5/8-11 Nut 849259

Pin Wrench 102-SPWR

SANDING PADS FOR RIGHT ANGLE SANDERS

model Spindle output Size Part number max. Rated Speed

300RA(E)(X)M 5/8-11 Output Spindle 5 Inch 849848 10000 RPM

400RA(E) & 407RA(E)

3/8-24 Output Spindle4 Inch 889271-A 12000 RPM

5 Inch 849848-A 10000 RPM

5/8-11 Output Spindle4 Inch 889271 12000 RPM

5 Inch 849848 10000 RPM

400RA(E)(X)M 5/8-11 Output Spindle 7 Inch 849913 8500 RPM

4520RA & 4620RA 5/8-11 Output Spindle 7 Inch 849913 8500 RPM

4620RA(X)M 5/8-11 Output Spindle 7 Inch 849913 8500 RPM

520RA 5/8-11 Output Spindle 7 Inch 849913 8500 RPM

3/8-24 Nut 849259-A

5/8-11 Nut 849259

Pin Wrench 102-SPWR

ACCE

SSOR

IES


Other Accessories

ACCESSORIES

SCREEN HANDLE BUSHINGSDescription Part number

1/4" NPT Male to 1/4" NPT Female 400-27

3/8" NPT Male to 3/8" NPT Female 841552



COLLETSType Description Part number

2 Pc. Collets (Split Style Collets)

3/8-24 Type 1 Spindle to 1/4" Collet TC-1010

3/8-24 Type 1 Spindle to 3/8" Collet TC-1010-3/8

3/8-24 Cone Spindle to 1/4" Collet TC-1012A

5/8-11 Cone Spindle to 1/4" Collet TC-1104

3 Pc. Collet (Insert Style Collet) 3/8-24 Cone Spindle to XX Collet AA-H209-XX

Note: The XX in the AA-H209 represents the insert size. (ex.- 1/4, 6MM,3/8, etc.)

CONE WHEEL ADAPTERSmodel Description Part number

400GH4/407GH4/500H4/507H4 3/8-24 Type 1 Spindle to 3/8-24 Cone 400-77

520H 5/8-11 Type 1 Spindle to 5/8-11 Cone 700-4CW

56H/65H

ACCESSORIES


ACCE

SSOR

IES

Guards

ACCESSORIES

GUARDS FOR VERTICAL GRINDERS

Type 27 Wheel Guards Type 28 Wheel Guards

model Size Part number model Size Part number

520V7 Inch nV-G-727

520V7 Inch nV-G-728

9 Inch nV-G-927 9 Inch nV-G-928

54V7 Inch 700-200

54V7 Inch 700-200-28

9 Inch 700-201 9 Inch 700-201-28

64V7 Inch 700-200

64V7 Inch 700-200-28

9 Inch 700-201 9 Inch 700-201-28

CUP WHEEL GUARDS

Type 11 Wheel Guards

model Size Part number

520V 4 Inch nV-G-411

58C4 Inch 560-46

5 Inch 560-45

6 Inch 412988

68C5 Inch 560-45

6 Inch 412988

GUARDS FOR RIGHT ANGLE GRINDERS

Depressed Center Wheel (Type 27) Guards Type 1 Cut-off Wheel (Type 41) Guards

model Size Part number model Size Part number

300RA4 Inch HRGD-427


4 1/2 Inch HRGD-4527 4 1/2 Inch HRGD-4541

300RAE4 Inch HRGD-427






5 Inch HRGD-527 5 Inch HRGD-541

400RAE

4 Inch HRGD-427

400RAE

4 Inch HRGD-441










320RA4 Inch ERGD-427

320RA4 Inch ERGD-441

420RA 420RA

520RA7 Inch nRA-727 520RA 10 Inch nRA-1041

9 Inch nRA-927

GUARDS FOR HORIZONTAL GRINDERS

Type 1 Wheels Guards


400GH4 3 Inch HG3-01

407GH4 4 Inch HG4-01

500H4 3 Inch HG3-01

507H4 4 Inch HG4-01

520H4 Inch 5204-01

6 Inch 5206-01

56H6 Inch 650-HS-56A

8 Inch 650-HS-58A

65H6 Inch 650-HS-56A

8 Inch 650-HS-58A

GUARDS FOR EXTENDED GRINDERS



400GEH4 3 Inch HG3-01

407GEH4 4 Inch HG4-01

520HGEH4 Inch 5204-01

6 Inch 5206-01

65HGEH 6 Inch 5206-01

GUARDS FOR DIE GRINDERS



400GT4 3 Inch 4503-01407GT4 4 Inch 4504-01


Maintenance Tools

ACCESSORIES

MAINTENANCE TOOLSBearing Drivers/Spindle Holders

Extended Grindersmodel Description Bearing Part number

400EH/400GEHBearing Driver

H9

1100-802

Coupling Nut Holder 1100-862

520HGEH Coupling Nut Holder 1100-862

65HGEH

Bearing Driver

700-9 (Rear)

1100-808

Spindle Holder 1100-650


Die Grindersmodel Description Bearing Part number

300GE/300HGE Bearing Driver 400-9 1100-802

400GE/400HGE/400GT Bearing Driver H9 1100-802

MAINTENANCE TOOLSBearing Drivers/Spindle Holders

Vertical Grindersmodel Description Bearing Part number

54V/58C/64V/68CBearing Driver 700-7 (Front) 1100-834

Bearing Driver 700-9 (Rear) 1100-808


Right Angle Grinders/Sandersmodel Description Bearing Part number

300RA(E) Bearing Driver 400-9 1100-802

320RA Bearing Driver 400-9 1100-802

330RA / 340RA Bearing Driver 400-9 1100-802

3101RA Bearing Driver 400-9 1100-802

400RA(E)/410RA(E) Bearing Driver H9 1100-802

420RA Bearing Driver H9 1100-802

4101RA Bearing Driver H9 1100-802

4520RA/4620RA Bearing Driver H9 1100-802

Horizontal Grindersmodel Description Bearing Part number

300EH Bearing Driver 400-9 1100-802

300GHBearing Driver

400-91100-802


400GHBearing Driver

H91100-802


56H/65H

Bearing Driver 550-10H (Middle) 1100-822

Bearing Driver700-9 (Rear)

1100-808


MAINTENANCE TOOLSDepressed Center Wheel Adapters

Vertical Grinders

model Wheel Size Description Part number

54V/64V/520V 7 Inch or 9 Inch Depressed Center Wheel Adapter 849269

Right Angle Grinders

model Wheel Size Description Part number

300RA(E)/400RA(E)/410RA(E) 4"

3/8-24 (Long Spindle) to 3/8 ID Adapter Set 490-K

3/8-24 (Long Spindle) to 5/8 ID Adapter Set AA-ADT27-354

320RA/420RA 3/8-24 (Short Spindle) to 3/8 ID Adapter Set 490-KR

300RA(E)/400RA(E)/410RA(E) 4 1/2"3/8-24 (Long Spindle) to 7/8 ID Adapter Set AA-ADT27-375

5/8-11 to 7/8 ID Adapter Set400RA(E) 5" AA-ADT27-575

400RAE 6"

520RA 7 Inch or 9 Inch Depressed Center Wheel Adapter 849269

ACCESSORIES


ACCE

SSOR

IES

Repair Kits

ACCESSORIES

Vertical Grinders/Sandersmodel Description Part number

520V Repair Kit 510254

54V/56S/58C Repair Kit 510077

64V/68C Repair Kit 510088

727V/711C Repair Kit 510488

Right Angle Grinders/Sanders

Model Description Part number

300RA Motor Repair Kit 510312Head Repair Kit 510318

300RAE Motor Repair Kit 510312Head Repair Kit 510320

300RA3MMotor Repair Kit 510312

Gear Train Kit 510344Head Repair Kit 510318

300RA5M / 300RA8MMotor Repair Kit 510312


300RAE3MMotor Repair Kit 510312


300RAE5M / 300RAE8MMotor Repair Kit 510312


300VGE Repair Kit 510312

320RA (Threaded Output) Motor Repair Kit 510312Head Repair Kit 510330

320RA (Collet Output) Motor Repair Kit 510312Head Repair Kit 510332

330RA/340RA (Threaded Output) Motor Repair Kit 510312Head Repair Kit 510336

330RAD/340RAD (Collet Output) Motor Repair Kit 510312Head Repair Kit 510334

400RA/407RA/410RA Motor Repair Kit 510284Head Repair Kit 510318

400RAE/407RAE/410RAE Motor Repair Kit 510284Head Repair Kit 510338



400RA5M/ 400RA8MMotor Repair Kit 510284


400RAE3MMotor Repair Kit 510284


400RAE5M/ 400RAE8MMotor Repair Kit 510284


420RA (Threaded Output) Motor Repair Kit 510284Head Repair Kit 510330

420RAD (Collet Output) Motor Repair Kit 510284Head Repair Kit 510332

520RA Motor Repair Kit 510260-A







4620RA5M / 4620RA8MMotor Repair Kit 510284


GENERAL NOTE: Right angle head repair kits do not include the angle gears.

Horizontal Grinders/Sandersmodel Description Part number

300EH Repair Kit 510310

300GHD Repair Kit 510314

300GH3MRepair Kit 510314

Gear Train Kit 510344

300GH5M / 300GH8M

Repair Kit 510314


400GH/407GH Repair Kit 510286

400GH3MRepair Kit 510286


400GH5M / 400GH8M

Repair Kit 510286


500H1M Repair Kit 510490

507H Repair Kit 510492




Extended Grindersmodel Description Part number

400EH Repair Kit 510250

400GEH Repair Kit 510252

520HGEH Repair Kit 510280

65HGEH Repair Kit 510306

65NEH Repair Kit 510496


Repair Kits

ACCESSORIES

Die Grinders/Sandersmodel Description Part number

300GE/307GE Repair Kit 510312

300HGE/307HGE Repair Kit 510300

300HGE3M/300GT3MMotor Repair Kit 510486


300HGE5M/300GT5M 300HGE8M/300GT8M

Repair Kit 510486


400GE/407GE Repair Kit 510284

400HGE/407HGE 400GT/407GT Repair Kit 510282

400HGE3M/400GT3MMotor Repair Kit 510412


400HGE5M/400GT5M 400HGE8M/400GT8M

Motor Repair Kit 510412


Drillsmodel Description Part number

300D3MMotor Repair Kit 510312


300D5M / 300D8MMotor Repair Kit 510312


300DRA3M



Head Repair Kit 510318

300DRA5M / 300DRA8M




300DRAE3M




300DRAE5M / 300DRAE8M




400D3MMotor Repair Kit 510284


400D5M / 400D8MMotor Repair Kit 510284


400DRA3M




400DRA5M / 400DRA8M




400DRAE3M




400DRAE5M / 400DRAE8M




400FD3MMotor Repair Kit 510284


400FD5M / 400FD8MMotor Repair Kit 510284


500FD1M Repair Kit 510490

Bench Grindermodel Description Part number

66VBG Repair Kit 510484

Belt Sandermodel Description Part number

300VBL Repair Kit 510312

Abrasive Cut Off Toolsmodel Description Part number

65VBW Repair Kit 510088

662VBW Repair Kit 510498 ACCESSORIES


WARRANTY

WAR

RANT

Y

T.C. Service Co. has a growing worldwide network of quality Authorized Agents that provide the total package…sales, service and repair.

Our joint goal is to provide you with the best American-made pneumatic tools for your application. TOP CAT® is proud to deliver quality tools at

a competitive price. Our knowledgeable Authorized Agents can offer the kind of customer service you deserve.

We strive to keep our Authorized Agents aware of our continued “Low Vibration” advancements, so they can offer tool selection recommendations.

Technical assistance is always available. Our Authorized Agents work with us to address any “custom” tool needs you may encounter.

For over 30 years, air tools with the TOP CAT® trademark have represented the highest quality in design, performance and durability. Thank you

for choosing TOP CAT®. We appreciate your business.

Subject to the termS and conditionS hereinafter Set forth, t.c. Service co. warrantS productS and partS

Sold by it, inSofar aS they are of itS own manufacture, againSt defectS of material and workmanShip,

under uSe and Service in accordance the t.c. Service co.’S written inStructionS, recommendationS, and

ratingS for inStallation, operation, maintenance, and Service of productS, for a period of one year from

the date of Shipment by t.c. Service co., or any of t.c. Service co.’S authorized diStributorS. thiS warranty

doeS not apply to miSuSed, abuSed, modified, or to uSe attributed to normal wear of the tool.

thiS warranty iS limited to the repair or replacement, aS t.c. Service co. may elect, of any defective partS,

regarding which, upon diScovery of the defectS, the purchaSer haS given immediate written notice.

inStallation and tranSportation coStS are not included. t.c. Service co. Shall have the option of requiring

the return to it of the defective material, tranSportation prepaid, for inSpection.

thiS warranty iS in lieu of all other, expreSS or implied, including without limitation any warranty of

merchantability or fitneSS for any purpoSe. the forgoing StateS the purchaSer’S Sole and excluSive

remedy and t.c. Service co.’S Sole and excluSive liability for any claimS of damage in connection with

the Sale of productS or partS hereunder. t.c. Service co. will in no event be liable for any conSequential,

incidental, Special or contingent damage or expenSe ariSing directly or indirectly from any defect in

itS productS or partS or from the uSe of any defective productS or partS. nor iS any other perSon

authorized to aSSume for t.c. Service co. any Such liability. t.c. Service co.’S liability for loSSeS or

damageS ariSing out of the Supply or uSe of itS productS or partS Shall in no event exceed the price

charged for Such productS or partS. the governor iS guaranteed for the life of the tool, if not abuSed.

Warranty

T.C. Service Co.38285 Pelton Road • Willoughby, Ohio 44094 U.S.A. Phone: (440) 954-7500 • (800) 321-6876 Fax: (440) 954-7118 • (877) 800-3589 Visit our web site: www.tcservice.com E-Mail: [email protected]

INDEX

INDEX

91

model listing Description Page

300B Belt Sander 70

300D(X)M Inline Drill 66

300DRA(X)M Right Angle Drill 68

300DRAE(X)M Extended Right Angle Drill 68

300EH Extended Die Grinder 44

300GE Die Grinder 58

300GH Horizontal Grinder 44

300GH(X)M Horizontal Sander/Polisher 46

300GT(X)M Sander/Polisher 63

300HGE Die Grinder 58

300HGE(X)M Sander/Polisher 62

300RA Right Angle Grinder 16, 22 & 30

300RA(X)M Right Angle Sander/Polisher 36

300RAE Extended Right Angle Grinder 17, 23 & 31

300RAE(X)M Extended Right Angle Sander/Polisher 37

300VGE Vertical Die Grinder 26



307RA Right Angle Grinder 30

307RAE Right Angle Sander 31

3101RA Right Angle Sander/Polisher 34


330RA Right Angle Die Grinder 24 & 32

340RA Right Angle Die Grinder 24 & 32

400/410RA(X)M Right Angle Sander/Polisher 36

400/410RAE(X)M Extended Right Angle Sander/Polisher 37

400D(X)M Inline Drill 66

400DRA(X)M Right Angle Drill 68

400DRAE(X)M Extended Right Angle Drill 68

400EH Extended Grinder 50

400FD(X)M Floor Drill 69


400GEH Extended Grinder 51

400GH Horizontal Grinder 40, 42, 43 & 45

400GH(X)M Horizontal Sander/Polisher 46

400GT Die Grinder 59. 60 & 61

400GT(X)M Sander/Polisher 63

400H(X)M Power Supply Motor 80


400HGE(X)M Sander/Polisher 62

400RA Right Angle Grinder 16 & 30

400RAE Right Angle Grinder 17 & 31

407GEH Extended Grinder 51

407GH Horizontal Grinder 40

model listing Description Page

407GT Die Grinder 60 & 61



410RA Right Angle Grinder 22

410RAE Right Angle Grinder 23




4620RA(X)M Right Angle Sander/Polisher 36

500D2M Inline Drill 67

500FD1M Floor Drill 69

500H1M Power Supply Motor 81



507H Horizontal Grinder 40, 42, 43 & 45

520H Horizontal Grinder 41 & 43




520HGEH Extended Grinder 52

520RA Right Angle Grinder 19 & 35

520V Vertical Grinder 7, 9 & 12

54V Vertical Grinder 7

56H Horizontal Grinder 41

56PC Pile Cutter 11

56S Vertical Sander 12

58C Vertical Grinder 9


65H Horizontal Grinder 41

65HGEH Extended Grinder 53

65NEH Extended Grinder 54

65VBW Abrasive Cutting Machine 72

662VBW Abrasive Cutting Machine 72

664 Power Supply Motor 82

66PC Pile Cutter 11

66VBG Bench Grinder 71




80-SERIES Chipping Hammer 77

TC-1 Scaler 75, 76

TC-182 Scaler 75, 76

TC-183 Chipping Hammer 77

T.C. Service Co.38285 Pelton Road • Willoughby, Ohio 44094 U.S.A. Phone: (440) 954-7500 • (800) 321-6876 Fax: (440) 954-7118 • (877) 800-3589 Visit our web site: www.tcservice.com E-Mail: [email protected]

© 2 0 1 3 T . C . S e r v i c e C o . , a l l r i g h t s r e s e r v e d

Quality tools that perform and last, designed and built to meet our Customer’s needs.

Top Cat air tools are designed and built at our facilities in northeast Ohio, U.S.A. We utilize the most modern design and manufacturing techniques and equipment to provide our experienced builders with the parts needed for YOUR top quality tools. Air tools that are built for hard work, long life and safe operation.

We offer our customers a solid commitment of technical support before and after the sale. We use our 50 plus years of experience to help you select the proper tool and tool set up to meet your application needs. Our customer/technical service professionals are always ready to answer questions about our tools and share knowledge that may help in your selection of Top Cat Tools.

From our facility or at yours, we offer tool seminars/demonstrations of proper and safe tool use and repair clinics. Clinics where customers learn the real value of genuine Top Cat replacement parts.

Can’t find the right tool?

Have a unique application?

Check with us.

For over 50 years we have modified existing tool designs, designed/built specialty tools to meet your needs, and in each case provided quality tools that perform, offer versatility and stay in service for a long time.

The T.C. PrideT.C. Service has a growing worldwide network of quality Authorized Agents that provide the total package, sales, service and repair.

Our joint goal is to provide you, our customers, with the best American made pneumatic tools for the required job. These tools are Top Cat quality, delivered quickly at a competitive price. Our Authorized Agents know our tools and they can offer the kind of customer service you deserve.

We strive to keep our Authorized Agents aware of our continued ergonomic advancements, so that they can make tool selection recommendations. Technical assistance is always available. Our Authorized Agents work with us to address any special tool needs you may encounter.

To order, contact your local T.C. Service, Top Cat Authorized Agent or call us for the Agent nearest you.

AIR TOOLS