Upload
trista-veil
View
217
Download
0
Tags:
Embed Size (px)
Citation preview
General Safety
Wear your safety glasses at all times
Take off all jewelry
Do not wear loose clothing
Make sure you are the only person in the safety zone when operating the Drill Press.
General Safety continued
Keep your material tight against the table
Clear scrap or cut material with a brush, other scrap material, or your project from the table. Do not use your hands.
Use wood screw clamps to tighten the material to the drill press table
Countersinking
Countersinking is defined as creating a hole completely through the thickness of the material with a taper on the surface to accommodate the taper head of a screw
Operation Procedure 7
Turn the machine on and drill or bore the hole needed.
Use a consistent rocking motion to clear chips from the hole