DATE ISSUED • 16 • 04 • 2014 TECHNICAL DATA SHEET DROP IN ANCHORS L - d 0 - t - Length Drill Size Thread Ø L L t t d 0 d 0 Materials Concrete Standard Style Lipped (with Collar) Substrate Concrete ≥ 25 N/mm 2 Size Ø (mm) t M6 M8 M10 (1030) M10 M12 Drill Hole Ø (mm) d 0 8 10 12 12 16 Embedment Depth (mm) h ef 25 30 30 40 50 Min Drill Hole Depth (mm) h 0 25 30 30 40 50 Centre Spacing (mm) S min 75 90 90 120 150 Edge Distance (mm) C min 75 90 90 120 150 Min Structure Thickness (mm) 100 100 100 100 125 Rec. Tightening Torque (Nm) 3 5 7 7 16 Rec. Tensile Load (kN) N rec 1.29 2.22 3.16 4.65 9.35 Technical Data Key Features • Quick hammer - set installation • Two versions - Standard or Lipped (with Collar) • Zinc plated and passivated - (3-5 microns) • Lipped (with Collar) - Prevents the anchor being pushed too far into the concrete during installation • Setting tools - To suit each size of anchor • Internally threaded expansion anchor for use in concrete. Product Information

DROP IN ANCHORS - Microsoft... · DROP IN ANCHORS Applications Installation Guide 1) Drill a hole to the required diameter and depth 3) Place the anchor into the hole 2) Clean the

Download PDF Report

Upload
others
View
4
Download
0

Embed Size (px)

Citation preview

DAT

E IS

SUED

• 16

• 04

• 20

14TE

CHN

ICA

L D

ATA

SH

EET

DROP IN ANCHORS

L - d0 - t -

LengthDrill SizeThread Ø

L

L

t

t

d0

d0

Materials

Concrete

Standard Style

Lipped (with Collar)

Substrate Concrete ≥ 25 N/mm2

Size Ø (mm) t M6 M8 M10 (1030) M10 M12Drill Hole Ø (mm) d0 8 10 12 12 16Embedment Depth (mm) hef 25 30 30 40 50Min Drill Hole Depth (mm) h0 25 30 30 40 50Centre Spacing (mm) Smin 75 90 90 120 150Edge Distance (mm) Cmin 75 90 90 120 150Min Structure Thickness (mm) 100 100 100 100 125Rec. Tightening Torque (Nm) 3 5 7 7 16

Rec. Tensile Load (kN) Nrec 1.29 2.22 3.16 4.65 9.35

Technical Data

Key Features

• Quick hammer - set installation • Two versions - Standard or Lipped (with Collar)• Zinc plated and passivated - (3-5 microns)• Lipped (with Collar) - Prevents the anchor

being pushed too far into the concrete during installation

• Setting tools - To suit each size of anchor

• Internally threaded expansion anchor for use in concrete.

Product Information
Issu

e 1

TECH

NIC

AL

DAT

A S

HEE

T

DROP IN ANCHORSA

pplic

atio

ns

Installation Guide1) Drill a hole to the required diameter and depth

3) Place the anchor into the hole

2) Clean the hole 4) Using the matching setting tool and a club hammer, drive the cone into place until the collar of the setting tool rests against the surface of the anchor

5) Screw either a threaded rod or bolt into the anchor, to the minimum thread insertion depth

Drop In Anchors - Standard StyleTIMco Code

Thread 0t

Anchor Length

(mm)L

Min Thread Length

(mm)

Min Hole Depth (mm)

h0

Clearance Hole in

Fixture (mm)df

Box Qty Carton Qty

06WA M6 25 10 25 8 100 2,00008WA M8 30 14 30 10 100 1,20010WA M10 40 15 40 12 50 60012WA M12 50 20 50 14 50 300

Drop In Anchors - Lipped

TIMco Code

Thread 0t

Anchor Length

(mm)L

Min Thread Length

(mm)

Min Hole Depth

(mm)h0

Clearance Hole in

Fixture (mm)df

Box Qty Carton Qty

08LWA M8 30 14 30 10 100 1,2001030LWA M10 30 15 30 12 50 60010LWA M10 40 15 40 12 50 600

Setting Tool

TIMco Code To Fit Anchor Size Qty Per Bag

06WAS M6 108WAS M8 110WAS M10 112WAS M12 1