Embed Size (px)
Citation preview
208 www.hpceurope.com - Tel: +33(0)4 37 496 496Volume 3 2016
Stock*
*Depending on availablity - Dimensions in mm
Part number Type Weight
(g)Price each1 to 4
DryLin®N miniature guiding system
- Linear rail with polymer slide- Reduced size (both height and surface)- Dry working, no maintenance required- Not affected by dust- Corrosion-resistant- Reduced coefficient of fiction means wear is
reduced- Reduced weight thanks to use of a
combination of aluminium and plastic- Very high speeds and acceleration possible- Replaceable sliding parts in iglidur® J- Materials:
Slide body: PlasticRails: Anodised aluminium
- Symmetrical hole pattern, C5=C6
.Options.- Rail length up to 1960mm max.
Loads up to 50NNK17NW17
60
Max. 1000
1420
C5 = 20...49 C6 = 20...49
9,6Bore Ø5 min.
For M3 screwDIN 7984 DIN 6912 DIN 84EN ISO 1707
6 ±0.3
17+0.0-0.4
1
M3S=min. 2
Screw height
Max. s+2.5Min. s+0.5
Small but effective
Stock*NK02-17-1000 1 Rail (1000mm) + 1 slide 151,7 4 47,80 FNW02-17 1 slide only 1,7 4 4,25 F
DISCOUNTSQty 1+ 5+ 10+
Disc. List -6% On request
209 Fax: +33(0)4 37 490 055 - [email protected] Volume 3 2016
Stock* Part number Type Weight
(g)
Price each1 to 4
*Depending on availablity - Dimensions in mm
DryLin®N miniature guiding system
NS & NW-01 NS & NW-02
Small but effective
Load up to 500N NK27NW27
141.5 0.8
1.5
3
For M4 screwDIN 7984 / DIN 6912
DIN 84 / EN ISO 1707
M4 (Max. torque 3 Nm)
Min. bore Ø6.5
9.5 ±0.4
22 -0.4-0.4
S = min. 5
Screw lengthmin. s - 1,0max. s + 4.5
Type 2Type 1 1.5
2740 60
203020
C5 = 20-49 C5 = 20-49 C6 = 20-49C6 = 20-49
Type 2Type 1
- Linear rail with polymer slide- Reduced size (both height and surface)- Dry working, no maintenance required- Not affected by dust- Corrosion-resistant- Reduced coefficient of fiction means wear is
reduced- Reduced weight thanks to use of a combination of
aluminium and plastic- Very high speeds and acceleration possible- Replaceable sliding parts in iglidur® J- Materials:
Slide body: ZincRails: Anodised aluminium
- Symmetrical hole pattern, C5=C6
.Options.- Rail length up to 3000mm max.
NK01-27-1000 1 Rail (1000mm) + 1 slide type 1 300,8 4 61,50 FNK02-27-1000 1 Rail (1000mm) + 1 slide type 2 302,5 4 63,60 FNW01-27 1 slide type 1 only 10,8 4 4,78 FNW02-27 1 slide type 2 only 12,5 4 6,90 F
Stock*
DISCOUNTSQty 1+ 5+ 10+
Disc. List -6% On request
210 www.hpceurope.com - Tel: +33(0)4 37 496 496Volume 3 2016
Stock* Part number Type Weight
(g)
Price each1 to 4
DryLin®N miniature guiding system
- Linear rail with polymer slide- Reduced size (both height and surface)- Dry working, no maintenance required- Not affected by dust- Corrosion-resistant- Reduced coefficient of fiction means wear
is reduced- Reduced weight thanks to use of a
combination of aluminium and plastic- Very high speeds and acceleration possible- Replaceable sliding parts in iglidur® J- Materials:
Slide body: ZincRails: Anodised aluminium
- Symmetrical hole pattern, C5=C6
.Options.- Rail length up to 3000mm max.
Small but effective
Load up to 700NNK40NW40
60
204050
1000
C5 = 20...49 (C5=C6) C5 = 20...49 (C5=C6)
23Min. bore Ø6,5
For M4 screwDIN 7984 DIN 6912 DIN 84EN ISO 1707EN ISO 7045
6 ±0.3
40
1.4
0.89.5
S=min. 5
M4 (max. torque 3 Nm)
NK02-40-1000 1 Rail (1000mm) + 1 slide 480 4 78,21 FNW02-40 1 slide only 30 4 8,93 F
Stock*
*Depending on availablity - Dimensions in mm
DISCOUNTSQty 1+ 5+ 10+
Disc. List -6% On request
211 Fax: +33(0)4 37 490 055 - [email protected] Volume 3 2016
Stock* Part number Type Weight
(g)Price each1 to 4
DryLin®N miniature guiding systemLoad up to 1000N NK80
NW80- Linear rail with polymer slide- Reduced size (both height and surface)- Dry working, no maintenance required- Not affected by dust- Corrosion-resistant- Reduced coefficient of fiction means wear is
reduced- Reduced weight thanks to use of a combination
of aluminium and plastic- Very high speeds and acceleration possible- Replaceable sliding parts in iglidur® J- Materials:
Slide body: PlasticRails: Anodised aluminium
- Symmetrical hole pattern, C5=C6
.Options.- Rail length up to
3960mm max.
Small but effective
5745
Screw M4DIN 7984DIN 6912
DIN 84EN ISO 170780
12±0.3
1.640
Max. screw height 6.5
150
40
1000
5668C5 = 25...100 C6 = 25...10080
Stock*
*Depending on availablity - Dimensions in mm
NK02-80-1000 1 Rail (1000mm) + 1 slide 1240 4 106,74 FNW02-80 1 slide only 100 4 14,12 F
DISCOUNTSQty 1+ 5+ 10+
Disc. List -6% On request
212 www.hpceurope.com - Tel: +33(0)4 37 496 496Volume 3 2016
S
T
DryLin®N Rail end capAccessoryNSKB
- Rail end cap- The end caps are compatible with
Drylin® N guide rails and prevent carriages sliding off whilst offering an aesthetic finish and protection against cuts from sharp edges
.Advantages.- Easy mounting- Low cost- Can be removed- High retention force
.Material.- Polymer
Part number S T For railPrice each.
1 to 4
Easily assembled by hand Disassembled using a screwdriver
NSKB-17 1,5 7 NK02-17 8,42 FNSKB-27 2 8 NK01-27, NK02-27 9,01 FNSKB-40 1,5 8 NK02-40 On requestNSKB-80 2 17 NK02-80 12,37 F
Dimensions in mm
DISCOUNTSQty 1+ 5+ 10+
Disc. List -6% On request
213 Fax: +33(0)4 37 490 055 - [email protected] Volume 3 2016
DryLin® N miniature guiding system
.Maximum loads.
50 N Iz=120mm4
Wb=33mm3
50 NIy=1700mm4
Wb=200mm3
0.6 Nm
500 N I=588mm4
500 NI=6524mm4
5 Nm
700 N I=970mm4
Wb=170mm3
700 NI=26400mm4
Wb=660mm3
10 Nm1000 N I=2900mm4
Wb=380mm3
65 Nm1000 N
yz
x
NK02-17
NK02-40 NK02-80
NK01-27NK02-27
yz
x
yz
x
yz
x
Technical information NKNW
1000
100
100.1
Speed v (m/s) (dotted lines = z axis)
Load
F (N
)
Size 17 y axis
Size 80 y axis
Size 80 y axis
1 10
Max dynamic load capacity for DryLin® N
Size 27 y axis
Size 27 y axis
Size 40 y axis
Size 40 y axis
