© Telect, Inc., All Rights Reserved, 6.29.121.509.926.6000 :: telect.com

1

DSneXtCopper :: The Dynamic Solution for Copper Connectivity

DSneXt provides the consolidated, fully configurable solution for copper connectivity.

DSneXt facilitates network growth and planned revenue with its growable functionality. DSneXt empowers users to purchase and deploy connectivity modules as needed, when circuits are ready to earn revenue.

DSneXt has three distinctive front cross-connects and four I/O backplanes available, providing a fully customizable platform for your network needs through its modular styling. Cables are managed and frame space is saved while connectivity capabili-ties (non-intrusive patch, test, monitor, and cross-connect) are provided. The dense terminations conserve RU space, and the dual monitor ports facilitate access to both sides of a circuit.

Take control of your connectivity with this intelligently designed panel, engineered to the industry’s highest standards.

Primary Benefits

• Traditional digital E1/T1 distribution frames• High-density central office bays• Individual panels for remote sites and other smaller

applications• Die-cast jacks for extreme environments

Applications

• Flexible design allows you to add modules as your network grows

• With three different front cross-connects (WW, IDC, and RJ48) and four different backplanes (WW, IDC, RJ48, and BNC) available, the modules are fully customizable

• Provides superior jack performance; the rigidity and strength of Telect’s patented, die-cast jacks out-perform competitors’ molded plastic jacks

• Dual monitor ports allow access to both ends of the circuit • Provides a multiple interface point for testing, patching,

monitoring, and cross-connecting E1/T1 circuits with a 4-port bantam jack

• Cuts costs and maintenance time through cable and space management

• DSneXt consolidates three product lines (E64, E84, and Supermix) into one solution

• Chassis are available in 58.42 cm (23") and 48.26 cm (19") sizes, providing for 56, 64, or 84 terminations

• NEBS Certified

Overview

Jack Specifications

EnvironmentalSalt spray Per MIL-STD-202F, method 101DMoisture resistance Per MIL-STD-202F, method 106EThermal limits -40 to 65° C operating

-55 to 85° C non-operatingThermal shock Per MIL-STD-202, method 107DHumidity 0 to 95% operating and non-operating

Electrical E1Insertion loss BNC: 0.7 dB at 1.024 MHz Wire-wrap: 0.1 dB at

1.024 MHzCrosstalk BNC: Adjacent channel -70 dB at 1.024 MHz;

inter-channel -70 dB at 1.024 MHzWire-wrap: Adjacent channel -60 dB at 1.024 MHz; inter-channel -70 dB at 1.024 MHz

Return loss BNC: -20 dB at 1.024 MHz Wire-wrap: -30 dB at 1.024 MHz

Monitor level -20dB (±1.5dB)

MechanicalInsertion Force 4.17 lb (1.9 kg) averageWithdrawal Force 5.21 lb (2.4 kg) averageLife Minimum 20,000 insertion/withdrawal cyclesVibration Per MIL-STD-202F, method 201A

ConnectionsJack type E1/T1 Standard Bantam

Electrical T1Insertion Loss < -0.5 dB (at 1.576 MHz)Crosstalk < -60 dBReturn Loss < -26 dB at 772 kHzContact Resistance < 0.01 ohmsCharacteristic Impedance

Standard DSX-1 Products: 100 ohms

Monitor level -20dB (±1.5dB)

DNX-9423 Module

DNX BACKPLANES (RJ48, BNC, IDC, WW)

© Telect, Inc., All Rights Reserved, 6.29.121.509.926.6000 :: telect.com

2

DSneXtCopper :: The Dynamic Solution for Copper Connectivity

Ordering Information

P/N DescriptionDNX-9401 DSX1: MOD, DNX, DM, IDC FXC E1, BNC, I/ODNX-9402 DSX1: MOD, DNX, DM, IDC FXC E1, IDC, I/ODNX-9403 DSX1: MOD, DNX, DM, IDC FXC E1, RJ48, I/ODNX-9404 DSX1: MOD, DNX, DM, IDC FXC E1, WW, I/ODNX-9411 DSX1: MOD, DNX, DM, RJ48 FXC E1, BNC, I/ODNX-9412 DSX1: MOD, DNX, DM, RJ48 FXC E1, IDC, I/ODNX-9413 DSX1: MOD, DNX, DM, RJ48 FXC E1, RJ48, I/ODNX-9414 DSX1: MOD, DNX, DM, RJ48 FXC E1, WW, I/ODNX-9421 DSX1: MOD, DNX, DM, WW FXC E1, IDC, I/ODNX-9422 DSX1: MOD, DNX, DM, WW FXC E1, RJ48, I/ODNX-9423 DSX1: MOD, DNX, DM, WW FXC E1, BNC, I/ODNX-9424 DSX1: MOD, DNX, DM, WW FXC E1, WW, I/ODNX-9424F DSX1: MOD, DNX, DM, WW FXC E1, WW, I/O

SolderedDNX-9301 DSX1: MOD, DNX, SM, IDC FXC E1, BNC, I/ODNX-9302 DSX1: MOD, DNX, SM, IDC FXC E1, IDC, I/ODNX-9303 DSX1: MOD, DNX, SM, IDC FXC E1, RJ48, I/ODNX-9304 DSX1: MOD, DNX, SM, IDC FXC E1, WW, I/ODNX-9311 DSX1: MOD, DNX, SM, RJ48 FXC E1, BNC, I/ODNX-9312 DSX1: MOD, DNX, SM, RJ48 FXC E1, IDC, I/ODNX-9313 DSX1: MOD, DNX, SM, RJ48 FXC E1, RJ48, I/ODNX-9314 DSX1: MOD, DNX, SM, RJ48 FXC E1, WW, I/ODNX-9321 DSX1: MOD, DNX, SM, WW FXC E1, IDC, I/ODNX-9322 DSX1: MOD, DNX, SM, WW FXC E1, RJ48, I/ODNX-9323 DSX1: MOD, DNX, SM, WW FXC E1, BNC, I/ODNX-9324 DSX1: MOD, DNX, SM, WW FXC E1, WW, I/ODNX-9321 DSX1: MOD, DNX, SM, WW FXC E1, IDC, I/ODNX-9324F DSX1: MOD, DNX, SM, WW FXC E1, WW, I/O

Soldered

Modules P/N DescriptionDNX-1319 DSX1: CHS, DNX, FXC, 19x5.25 DNX-1319B DSX1: CHS BOT, DNX, FXC, 19x5.25DNX-1323 DSX1: CHS, DNX, FXC, 23x5.25DNX-1323B DSX1: CHS BOT, DNX, FXC, 23x5.25DNX-1419 DSX1: CHS, DNX, FXC, 19x7DNX-1419B DSX1: CHS BOT, DNX, FXC, 19x7DNX-1423 DSX1: CHS, DNX, FXC, 23x7DNX-1423B DSX1: CHS BOT, DNX, FXC, 23x7DNX-1619 DSX1: CHS, DNX, FXC, 19x6DNX-1619B DSX1: CHS BOT, DNX, FXC, 19x6DNX-1623 DSX1: CHS, DNX, FXC, 23x6DNX-1623B DSX1: CHS BOT, DNX, FXC, 23x6

Chassis :: Empty

P/N DescriptionDNX-TB19 DSX1: CHS DNX, FXC, TIEBAR, 19"DNX-RS19 DSX1: CHS DNX, FXC, RINGS, 19"DNX-FS19 DSX1: CHS DNX, FXC, FANNING STRIPS, 19" DNX-TB23 DSX1: CHS DNX, FXC, TIEBAR, 23" DNX-RS23 DSX1: CHS DNX, FXC, RINGS, 23"DNX-FS23 DSX1: CHS DNX, FXC, FANNING STRIPS, 23"040-1000-xxx Single Blue Nickel Bantam patch cords040-2000-xxx Dual Blue Nickel Bantam patch cords040-3000-0000 Bantam looping plugs060115RC 5-conductor cross-connect wire, 1000' reel

Accessories

DNX – Designates DSneXtDNX-9 – Designates ModuleDNX-X4 – Designates Monitor (# of ports) 4 = Dual (4 ports) 3 = Single (3 ports)DNX-XX0 – Designates Front Cross Connect 0 = Insulation Displacement Connection (IDC) 1 = RJ48 2 = WWDNX-XXX1 – Designates Input/Output 1 = BNC 2 = Insulation Displacement Connection (IDC) 3 = RJ48 4 = Wire WrappedDNX-XXXXF – Designates Fixed Jacks

DNX – Designates DSneXtDNX-1 – Designates ChassisDNX-X3 – Designates Equipment Height 3 = 3 RU (5.25 inches) 4 = 4 RU (7 inches) 6 = 6 inches 0 = No bottom TrayDNX-XX19 – Designates Rack Width 19 = 19 inches 23 = 23 inchesDNX-XXXXT – Designates Individual Chassis Component Leave Blank For Full Chassis T = Top of Chassis B = Bottom of Chassis

DNX-XXXX – Designates DSneXtDNX-XXXX – Designates Accessory TB = Tie Bar RS = Rings FS = Fanning StripsDNX-XX19 – Designates Rack Width 19 = 19 inches 23 = 23 inches