12
1104782-A2-N Installation & User Guide Dual-Flush Two Piece Toilet

Dual-Flush Two Piece Toilet · Installation 2 Define the position of connector: Place the connector onto the pan, position between outlet and waste pipe. 3 Mark the positions fo the

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Dual-Flush Two Piece Toilet · Installation 2 Define the position of connector: Place the connector onto the pan, position between outlet and waste pipe. 3 Mark the positions fo the

1104782-A2-N

Installation & User GuideDual-Flush Two Piece Toilet

Page 2: Dual-Flush Two Piece Toilet · Installation 2 Define the position of connector: Place the connector onto the pan, position between outlet and waste pipe. 3 Mark the positions fo the

Before You Begin

Tools and Materials

CAUTION: Risk of personal injury or product damage. Handle with care. Vitreous china can break or chip if the product is handled carelessly.

you start installation. If you encounter any installation or performance problems, please don’t hesitate to contact us. Our phone numbers and

(ÕÚÛÈÓÓÈÛÐÖÕɯÚÏÈÓÓɯÊÖÔ×ÓàɯÞÐÛÏɯ 2ɤ-92ɯƗƙƔƔɯÈÕËɯ 2ɤ-92ɯƚƘƔƔȭ Carefully inspect the new toilet for damage.

cistern, install one before installing the new toilet.

material for the anchoring devices.

1104782-A2-N 2 ENGLEFIELD

Page 3: Dual-Flush Two Piece Toilet · Installation 2 Define the position of connector: Place the connector onto the pan, position between outlet and waste pipe. 3 Mark the positions fo the

Installation

2 Define the position of connector: Place the connector onto the pan, position between outlet and waste pipe.

3 Mark the positions foÙ the floor fixing kit holes. Use the template (if supplied).

1 Remove the existing toilet: Turn off the water supply and flush the toilet, then sponge out all remaining water from the cistern. Disconnect the supply shut-off valve (if present), and remove the old pan and cistern.

CAUTION: Risk of hazardous gases. If the new toilet is not installed immediately, temporariÓy stuff a rag in the closet flange.

Waste Pipe

Waste Pipe

A

B

Connector to Wall Connector to Wall

Wall

Wall

ENGLEFIELD 3 1104782-A2-N

Case 1 Case 2Finished Wall

Finished Wall

Pan

ConnectorStraight Pipe Connector

Vario Pipe Connector

Setout

Pan

SetoutCase 3 Finished

Wall

Connector

Vario Pipe Connector

Pan

Setout

Offset Pan Collar

Page 4: Dual-Flush Two Piece Toilet · Installation 2 Define the position of connector: Place the connector onto the pan, position between outlet and waste pipe. 3 Mark the positions fo the

4 Floor Fixing -2 Methods4.1 With Brackets Drill 10 mm f

Place a washer onto each of the hexagon screws and insert them into the brackets leeves and,

using screws,

4.2 Screw Place the toilet into the desired position. Place the protective plastic sleeve onto

the drill bit and,using the anchoring holes in the toilet as your guide, drill 8 mm

1104782-A2-N 4 ENGLEFIELD

Anchor

Screw

Sleeve

Hole

Cap

HexagonLag Screw

Bracket

WasherAnchor

Screw Cap

Screw

Anchor

Sleeve

Drill

Page 5: Dual-Flush Two Piece Toilet · Installation 2 Define the position of connector: Place the connector onto the pan, position between outlet and waste pipe. 3 Mark the positions fo the

Tank Installation

1 Tank Information

Models: MilanoTuscano

Rear Water Inlet - Close Coupled

Inlet Valve

Flush Valve

Hose

Models: Mirage Delano

Emerald Ruby

Valencia

Bottom Water Inlet - Close Coupled

Inlet Valve

Flush Valve

For use with models: MilanoTuscano

Stop Valve

Tank Hose

Bottom Water Inlet - Coversion Kit(148794A-NA)

Inlet Valve

Flush Valve

ENGLEFIELD 5 1104782-A2-N

Page 6: Dual-Flush Two Piece Toilet · Installation 2 Define the position of connector: Place the connector onto the pan, position between outlet and waste pipe. 3 Mark the positions fo the

2 All other tanks Position the tank on the pan by centering the gasket on the pan inlet. Assemble

the retaining washer and sealing washer to the screw. Securely tighten the screw so the cistern is level.

Tank Fixing

3 to toilet supply shank.

1104782-A2-N 6 ENGLEFIELD

Screw

Flat Washer

Sealing Washer

NutPlastic Nut

Gasket

Screw

Retaining WasherFlat WasherFiber WasherSealing WasherScrew

Brass** Optional for di�erent products

Brass*/Stainless Steel

Water Supply Hose(Not supplied)

Water Supply Hose(Not supplied)

Rear Inlet TypeBottom Inlet Type

Page 7: Dual-Flush Two Piece Toilet · Installation 2 Define the position of connector: Place the connector onto the pan, position between outlet and waste pipe. 3 Mark the positions fo the

1 Install the seat as per the supplied seat instructions.

Toilet Seat Installation

ENGLEFIELD 7 1104782-A2-N

Page 8: Dual-Flush Two Piece Toilet · Installation 2 Define the position of connector: Place the connector onto the pan, position between outlet and waste pipe. 3 Mark the positions fo the

Install the Push Buttons

1 Disassemble the push rods. 2 Using the push rod, measure the distance between the flush valve and the top of the tank lid. Mark this lengh and cut the push rod to length.

3 Reassemble the push rods. 4 Fit the lid and test the buttons. Adjust the rods as required.

1104782-A2-N 8 ENGLEFIELD

Page 9: Dual-Flush Two Piece Toilet · Installation 2 Define the position of connector: Place the connector onto the pan, position between outlet and waste pipe. 3 Mark the positions fo the

Install Flush Valve

2 Assemble flush valve by pushing straight down into the canister and turning left.

Flush Valve B1 Release flush valve by squeezing

the tabs on both sides of the canister and pulling straight up

out of the flush valve.

2 Assemble flush valve by pressing it into the flush valve base so it snaps into place.

Flush Valve A1 Release flush valve by turning

right and pulling straight up on the canister.

ENGLEFIELD 9 1104782-A2-N

1

2

1

2

Page 10: Dual-Flush Two Piece Toilet · Installation 2 Define the position of connector: Place the connector onto the pan, position between outlet and waste pipe. 3 Mark the positions fo the

1104782-A2-N ENGLEFIELD

Page 11: Dual-Flush Two Piece Toilet · Installation 2 Define the position of connector: Place the connector onto the pan, position between outlet and waste pipe. 3 Mark the positions fo the

ENGLEFIELD 1104782-A2-N

Page 12: Dual-Flush Two Piece Toilet · Installation 2 Define the position of connector: Place the connector onto the pan, position between outlet and waste pipe. 3 Mark the positions fo the

1104782-A2-N

CALL US FOR HELP

NEW ZEALAND KOHLER NZ LTD

Free Ph: 0800 100 382 Free Fax: 0800 664 488 www.englefield.co.nz

AUSTRALIA KOHLER CO.

Free Ph: 1 )www.englefield.com

CONTACT AND WARRANTY INFORMATION

For warranty information, please visit our website

Australia www.englefield.com

New Zealand www.englefield.co.nz