Upload
baefikar-yaar
View
1.172
Download
25
Embed Size (px)
Citation preview
Pipes, Fittings and Valves
Imperial and Metric Systems
Technical Data and
Dimensions
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 2794502
At the forefront of development andmanufacture of thermoplastic pipework for overhalf a century, Durapipe products are widelyused in Utilities, Industrial and BuildingServices sectors around the world.
• Fully matched system
• Wide range of manualand actuated valves
• Comprehensive technicalsupport
• Fully approved
... don’t take a chancewith any other brand
Complete systemsolutions
email: [email protected] web: www.durapipe.co.uk 3
Index
Company Profile .....................................................................2
Durapipe ABS .....................................................................4-5
Durapipe ABS pipework .......................................................6-7
Material Properties and Product Selection Guide .......................8
Comparison of ABS Imperial and Metric Sized Pipe .................11
Index to ABS Imperial Fittings ..........................................12-13Pipe .....................................................................................14Sockets plain ........................................................................15‘O’ ring sockets......................................................................15Reducing sockets ...................................................................15Saddles ................................................................................15Reducing bushes ..................................................................16Elbows 45° ...........................................................................16Elbows 90° plain ...................................................................16Bends 90° ............................................................................17Bends 45° ...........................................................................17Bends 221⁄2° .........................................................................17Tees 90° ...............................................................................18Tees 45° ...............................................................................18Caps ....................................................................................19Socket unions........................................................................19Socket union plain adaptors ....................................................19Socket union threaded adaptors ..............................................19Socket union nuts ..................................................................20Imperial/metric socket adaptors ...............................................20Sockets plain/BSP threaded ...................................................20Reducing bushes ...................................................................20Barrel nipples........................................................................21Hexagon nipples ....................................................................21Adaptors male/female.............................................................21Adaptors female/male........................................................21-22Composite unions ..................................................................22Hose adaptors .......................................................................22Tank connectors.....................................................................23Elbows 90° plain/BSP threaded ..............................................23Sockets BSP threaded............................................................23Hexagon nipples ....................................................................23Back nuts .............................................................................24Plugs....................................................................................24Caps ....................................................................................24Elbows 90° BSP threaded ......................................................24Reducing bushes ...................................................................25Flanges full face ...............................................................25-26Flanges stub serrated .............................................................26Flanges blanking...............................................................26-27Gaskets flat ...........................................................................27‘O’ ring for socket union..........................................................27Gaskets full face ....................................................................28Backing rings ........................................................................29Valve support plates...............................................................30Cobra pipe clips ....................................................................30Saddle clips ..........................................................................30Durapipe one-step solvent cement and Eco-cleaner ...................31VK Double union ball valves ...................................................31Multiport ball valves...............................................................32Single union ball check valves.................................................33Air release valves...................................................................33Y type strainer .......................................................................33VM Diaphragm valves ............................................................34Pressure relief valves..............................................................34FK Butterfly valves.................................................................35
Index to ABS Metric Fittings ..................................................36Pipe .....................................................................................37Sockets.................................................................................38Reducing bushes ...................................................................38Reducers ..............................................................................39Elbows 45° ...........................................................................39Elbows 90° ...........................................................................39Bends 90° ............................................................................40Fabricated bends 90° .............................................................40Tees 90° ..........................................................................40-41Tees 45° ...............................................................................41Caps ....................................................................................42Socket unions........................................................................42Socket union plain adaptors ....................................................42Socket union threaded adaptors ..............................................42Socket union nuts ..................................................................43Imperial/metric socket adaptors ...............................................43Female threaded adaptors.......................................................43Male threaded adaptors..........................................................43Female composite unions .......................................................44Male composite unions...........................................................44Wall brackets ........................................................................44Hose adaptors .......................................................................44Stub flanges ..........................................................................45Blank flanges ........................................................................45Valve support plates...............................................................45Backing rings ........................................................................46Flat gaskets/stub flanges.........................................................47‘O’ ring for socket unions ........................................................47Cobra pipe clips ....................................................................48Durapipe one-step solvent cement and Eco-cleaner ...................48VK Double union ball valves ...................................................48Multiport ball valves...............................................................49Single union ball check valves.................................................50Air release valves...................................................................50Y type strainers .....................................................................50VM Diaphragm valves ............................................................51Pressure relief valves..............................................................51FK Butterfly valves.................................................................52Pipe trays .............................................................................53De-burring tools.....................................................................53Wheel cutters ........................................................................53
Durapipe ABS Design and Installation Guide...........................54Flow Nomogram....................................................................55Calculating Expansion and Contraction.....................................56
Additional Important Information ...........................................59
Durapipe ABS Jointing Guide (up to 8"/225mm)......................60
Durapipe ABS Jointing Guide (for 10"/250mm and 12"/315mm) .........................................62Notes ...................................................................................65Drying Times.........................................................................65Durapipe ABS Thixotropic Solvent Cement and Eco-cleaner........65Branch Connections ...............................................................66The use of Bushes, Reducers and Threaded adaptors ................67
General Information/Approvals ...............................................68
Product Specification (Imperial) .............................................69
Product Specification (Metric)................................................70
Other Durapipe UK Systems .................................................71
page page
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 2794504
Durapipe ABS - the proven industrial pipework system combiningcorrosion resistance, toughness and economy
Durapipe ABS The market leader in pipesystems for environmental control
QualityFully approved Items in the Durapipe ABS product rangeare assessed to several importantinternational standards, listed on page 68.
Quality control Our commitment to quality is reflected byour operation of an independently assessedquality management system registeredunder BS EN ISO 9001.
ReliabilityManufactured under strict ISO 9001 qualitycontrol procedures, Durapipe ABS offersconsistency, reliability and completereassurance to designer, installer and end-user.
Design Life Durapipe ABS systems have a 50 year design life with a residual safety factor of 2:1
Environment andConservationEnergy conservation is an issue that affectseveryone. It is significant that manufactureof Durapipe ABS pipework usesconsiderably less energy than is required toproduce the equivalent metal system. ABS can also be re-worked to avoid scrap.Additionally, the thermal properties of ABS,compared with those of metals, may resultin cost savings in lagging.Durapipe UK operates an environmentalmanagement system that has beensuccessfully assessed against the BS EN ISO 14001 environmentalmanagement standard.
Certificate No. FM 34819
Applications• Chilled water/air conditioning• Water treatment• Sewage treatment• Process cooling water• High purity water• Effluent and chemical processing• Film processing• Electrolytic metal refining• Food processing and soft drinks• Pharmaceutical products• Medical preparations
email: [email protected] web: www.durapipe.co.uk 5
Major Users• Alstom
• Anglian Water
• Bank of Zambia
• Boots
• BP
• British Avionics
• British Embassy, Muscat
• British Energy
• BT
• Coca Cola
• DEFRA
• Deluxe Laboratories Limited
• DML
• Dunlop
• Elga/US Filter
• Ferrati
• Fisons
• Ford Motor Company
• General Motors
• Harrods
• Hilton Hotels
• Hyatt Regency
• ICI
• Kodak
• Manchester airport
• Marks & Spencer
• McDonalds
• National Air Traffic Control
• National Power
• Orange
• Palace of the Hague
• Pedigree Pet Foods
• Pfizer
• Rank Organisation
• Rolls Royce
• J. Sainsbury plc
• Schipol Airport
• Science Research Centre
• Severn Trent Water
• Sony UK Limited
• Technicolor Limited
• Transco
• United Kingdom Atomic Energy Authority
• Wellcome
Supplementary ServicesWe offer the following supplementary services:• Advice regarding use of all Durapipe
products.
• Installed cost comparison.
• Product and application training seminars.
Technical SupportOur experience and expertise is at yourdisposal. Our Technical Support team willbe pleased to offer you design andinstallation advice.
AvailabilityDurapipe ABS pipework is available froman extensive international network ofdistributors and stockists. Please ask fordetails of your nearest outlet.
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 2794506
Durapipe ABS Pipework
MaterialsDurapipe ABS is manufactured fromAcrylonitrile Butadiene Styrene, a materialthat can be blended to give differentproperties to suit each of the many enduses for which this versatile material isoften chosen, such as household goods, DIY tools, automotive products or pressurepipework.
Acrylonitrile: imparts chemical resistance.
Butadiene: provides impact strength andtoughness.
Styrene: provides smooth surface finish.
The formulation used by Durapipe ABS hasbeen selected to optimise performance inrespect of toughness, strength, chemicalresistance, low temperature ductility,weathering, heat stability and ease ofprocessing from raw material to finishedproduct.
Wide operational temperature range,excellent durability and chemical resistanceare some of the reasons why Durapipe ABSis so extensively specified. A highlyversatile pipe system, available in Imperialand Metric sizes up to 12" and 315mmrespectively, it is equally suitable fortransportation of slurries as for potablewater, chemicals, or high purity water.
Tough and durableThe Butadiene constituent of ABS affordsexceptional resistance to accidentaldamage, a benefit which it retains, even atsub-zero temperatures.
Abrasion resistance Durapipe ABS offers good resistance toabrasion and erosion from aggressiveslurries.
Wide temperature rangeA major advantage of Durapipe ABS over otherplastic systems is its ability to perform over awide temperature range from –40ºC to +70ºC.(Note: usual precautions must be taken toprevent contents freezing.)
ABS-40° to 70°C
140
0
-40PVC-U
5° to 60°C
Tem
pera
ture
°C
CORZAN5° to 95°C
AirLine Xtra-20° to 50°C
PP-20° to 100°C
Comparative Temperature Ranges
Smooth bore, unhibited flow
Durapipe ABS, unlike copper or steel,is free from corrosion.
Durapipe ABS resists the limescale build-up common in most metal pipematerials as shown in the picture above.
Superior flow Low fluid friction allows higher flowvelocities than metal pipes, and alsoinhibits the formation of scale, withconsequent savings in pump energyconsumption, and reduced pressure drops.
Corrosion freeDurapipe ABS pipework is designed tohandle a wide range of chemicals includingmoderately strong mineral acids andcaustic solutions. Please refer to brochureD0238 Durapipe Chemical ResistanceData for further details.
email: [email protected] web: www.durapipe.co.uk 7
A totally homogeneous system solvent weld jointing - pipe and fitting become as one.
Non toxicMaterials used are selected for theirtoxicological properties, and suitability forconveying cold potable water.
No metallic stabilisersDurapipe ABS does not contain anyharmful metallic stabilisers, and is widelyused to convey high purity de-ionised waterin semi-conductor and pharmaceuticalapplications.
Low installed costsThe ease of handling and speed of jointingof Durapipe ABS will generally result in thetotal installed cost being lower than forthreaded, welded, or soldered metalsystems.
Extensive product rangeThe Durapipe ABS range comprises anextensive selection of Imperial and Metricpipes in various pressure ratings, plus awide selection of fittings.
Fast, simple, high integrity jointingSolvent welding is a simple process whichproduces a permanent joint of strengthequal to, or exceeding, the pipe itself. No special tools or equipment, or hotworks permits, are required.•No electricity required•No flame or combustible gas bottles
required on site•No site down-time due to electricity
shut down•No hot works permits or need for site
segregation•Permanent, secure jointing•No special tools needed•Easy transition to other systems•Reduced installation time•Reduced installation costs•Light and easy to handle
LightweightAt one-sixth the weight of steelpipes, Durapipe ABS is mucheasier to handle, especially duringinstallation at site.
Durapipe FIP expertise and experience• System design and sizing advice
• Valve and actuation selection advice
• Full quality assurance to BS EN ISO 9001
• Complete actuation traceability - each itemcarries an individual serial number
Durapipe FIP service• Most valves are available within 48 hours
of ordering
Fully complies with PEDThe European Parliament Pressure EquipmentDirective 97/23/EC requires that pressureequipment should meet essential safetyrequirements (including design, manufactureand testing) and must satisfy an appropriateconformity procedure.Durapipe FIP fully complies with theserequirements and operates within a fullQuality Assurance system to ISO 9001.
For full technical details about Durapipe FIPvalves and actuation please ask for a copy ofour manual and actuated valve technicalguide D0894.
Durapipe FIPManual and Actuated Valves
Wide range of valves and actuationThe Durapipe valve range is comprehensive,including many commonly required flow controlproducts. This includes ball, butterfly,diaphragm, non-return, solenoid and air releasetypes and is complemented by pneumatic orelectrical actuation. Importantly, we have adepartment dedicated to valves and actuation,able to provide expert advice about productselection and system design.
Solvent weld jointing of ABS. Pipe and fitting become as one.
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 2794508
Material Properties and Product Selection Guide
Chemical Resistance Typical Unsuitable for the Sizes and Jointingand Performance Data Applications Following Uses Information
Moderately strong mineral acids Chilled water, Applications over 70ºC Metric; 16mm to 315mm OD
Caustic and ammoniacal solutions low temperature brine, bleaches Imperial: 3/8" to 12" NB
Most inorganic salt solutions potable water solvents Jointed by solvent cement welding
Some detergents process water domestic hot water Threaded fittings available
Temperature range -40ºC to +70ºC foodstuffs flammable substances
Imperial Sizes
Pipe 3/8" - 2" 9, 12 and 15bar (Classes C, D, E & T)2" - 4" 9, 12 and 15bar (Classes C, D & E)6" 9 and 12bar (Class C & D)8" 9bar (Class C)10" & 12" 6bar (Class B)
Solvent Fittings 3/8" - 6" 15bar (Class E)*8" 9bar (Class C)10" & 12" 6bar (Class B)
Threaded Fittings 3/8" - 3" 12bar (Class D)*4" 9bar (Class C)
VK Ball Valves 3/8" - 2" 16bar (PN16)21/2" - 4" 10bar (PN10)
Other Valves 3/8" - 12" 10bar or 6 bar (PN10 or PN6)
Actuated Valves 3/8" - 12" 10bar or 6 bar (PN10 or PN6)
* Except 3" & 4" barrel nipples which are 9bar (Class C)
Metric Sizes
Pipe 16mm - 250mm 10bar (PN10)315mm 8bar (PN8)
Solvent Fittings 16mm - 250mm 10bar (PN10)315mm 8bar (PN8)
Threaded Fittings 16mm - 75mm 10bar (PN10)
VK Ball Valves 16mm - 63mm 16bar (PN16)75mm - 110mm 10bar (PN10)
Other Valves 16mm - 315mm 10bar or 6 bar (PN10 or PN6)
Actuated Valves 16mm - 315mm 10bar or 6 bar (PN10 or PN6)
Swept tees are 9bar (Class C)3" & 4" socket unions are 9bar (Class C)21/2" and 5" pipes are PN10O ring sockets are rated one class lower than the corresponding plain socket.Class T pipe is thick walled, suitable for threading
Pressure rating at 20ºC
Properties and Product Selection Guide
email: [email protected] web: www.durapipe.co.uk 9
Fracture modeDurapipe ABS is a ductile material and the fracture moderesembles that of soft copper. Mechanical damage causes ductiledistortion and tearing, the localised nature minimising the loss ofpipe contents.In contrast, the fracture of brittle material is accompanied by rapidcrack propagation and hazardous material fragmentation.The photograph illustrates the effect of impact upon Durapipe ABSpipe which, when compared with the brittle fracture modeexhibited by PVC-U pipework, is noticeably less dramatic.
Durapipe ABS pipe and fittingsDurapipe UK offer ABS pipework systems comprising pipes, fittingsand valves, joined by solvent welding, together with associatedaccessories. Products are available available in Imperial sizes from3/8" to 12" (nominal bore) and Metric sizes from 16mm to 315mm(outside diameter).
ABS and PVC-U Dimensions and standardsImperialThe Durapipe ABS Imperial System is manufactured in accordancewith the relevant British Standards. Kitemark licences are alsoheld, where applicable, for both pipes and fittings.
MetricThe Durapipe ABS Metric System is manufactured generally inaccordance with the relevant international standards as shownbelow:
ISO 15493KIWA 49 and 549DIN 8062 and 8063
Threaded fittings conform to the requirements of BS 21/DIN2999/ISO7. Socket dimensions of Durapipe ABS Metric fittings forsolvent welding comply with ISO/DIS 727-1.
MaterialsMaterials used for manufacture of pipes, fittings and valves areselected for their toxicological properties and suitability forconveyance of potable water as required by the appropriateinternational authorities.
Durapipe ABS material is UK Water Regulations Advisory Schemeapproved for cold water services and is listed in the Water Fittingsand Materials Directory.
Durapipe ABS material is approved by the Drinking WaterInspectorate, under Regulation 25, for use in the supply of waterfor drinking, washing, cooking, or food processing purposes.
Durapipe ABS formulation does not contain any harmful metallicstabilizers.
ColourDurapipe ABS products are a mid-grey colour, generally inaccordance with BS5252, colour ref. 18 B 21.
ABS PVC-U
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945010
Gaskets and sealsGaskets and O Ring seals are made from EPDM except wherestated otherwise.
Ordering by codeCode numbers should be used when ordering products e.g.
Imperial
Metric
Abbreviations The following list of abbreviations is used in this catalogue:ABS - Acrylonitrile Butadiene StyreneBS - British StandardsISO - International Standards OrganisationDIN - Deutsche Industrie Normen (German Industrial Standards)KIWA - Keuringsinstituut Voor Waterleidingartikelen (Netherlands)ANSI - American National Standards InstituteBSP - British Standard Pipe ThreadEPDM - Ethylene Propylene RubberFPM - Fluorine Rubber (e.g. Viton®)PTFE - Polytetraflouroethylene (eg Teflon®)® Dupont registered trade name.
Maximum Pressure/Temperature Relationship When temperature of contents exceeds 20ºC the working pressureof the system must be reduced accordingly (see table below).
The graph above is based on an ambient temperature of 20ºC
For higher ambient temperatures, or where pipework is insulated,decrease the working pressure by 5% for every 10ºC above 20ºCambient. Durapipe ABS systems are not recommended for use attemperatures in excess of 70ºC or below minus 40ºC.
Maximum pressure surges Durapipe ABS pipework can withstand pressure surges within thelimitations detailed in CP312 part:1973 and its amendment dated1977. On no account should pressure surges be allowed to exceedthe maximum continuous working pressure calculated using thegraph shown earlier.
InterchangeabilityComponents in the imperial and metric ranges are notinterchangeable, except for 21/2"/ 75mm and 5"/140mm.
Range Shape Size
ABS Tee 90mm
122 31311
Range Shape Size
ABS Tee 3"
12201 109
Metal/ABS pipe weight comparisonPipe weight comparison (kg / M)
Metal Pipe ABS PipeNominal SS Carbon Steel Nearest Equivalent Imperial Imperial Imperial Imperial MetricPipe Size Sch. 40 Heavy Weight ABS Sizes Class Class Class Class
(mm) Imperial NB Metric OD C D E T
15 1.28 1.45 1/2 20 0.13 0.22 0.10
20 1.70 1.90 3/4 25 0.20 0.28 0.14
25 2.52 2.97 1 32 0.21 0.31 0.43 0.21
32 3.43 3.84 11/4 40 0.32 0.49 0.65 0.33
40 4.07 4.43 11/2 50 0.42 0.64 0.85 0.52
50 5.42 6.17 2 63 0.67 1.00 1.28 0.81
80 11.31 10.10 3 90 1.40 2.16 1.65
100 16.02 14.40 4 110 2.32 3.59 2.45
150 28.22 21.20 6 160 5.12 6.50 5.13
Pipe weights taken from:SS Sch. 40 - API Specification 5L for Line Pipe Carbon Steel Heavy Weight - CIBSE Guide Vol. B, Table B16.3 Piping Data
0
20 30 40 50 60 70
2.0
4.0
6.0
8.0
10.0
12.0
14.0
16.0
Class B
Class C
Class D
Class E
PN10
Contents Temperature (°C)
Max
imum
con
tinuo
us w
orki
ng p
ress
ure
(bar
)
email: [email protected] web: www.durapipe.co.uk 11
Tabulated below is a comparison of imperial and metric sizedDurapipe ABS pipe. They are produced to different standards, butcan be joined together using flanges or adaptors.
The systems are also designated differently; the imperial systemrefers to the nominal bore size; the metric system relates to theoutside diameter.
Both systems are produced with the outside diameter as thecontrolled dimension. This enables the same fitting of a particularsize to be joined to all classes of pipe in that size.
Please refer to the pipe section in this brochure for pipe sizes available from Durapipe UK.
Threaded systemsImperial systems Class T ABS pipe can be machined to BSPparallel or BSP taper thread forms. Metric pipe is not producedwith an outside diameter suitable for threading.
Comparison of ABS Imperial and Metric Sized Pipe
3/8 17.0 1.6 3.4 16 16.0 1.41/2 21.2 1.9 3.5 20 20.0 1.53/4 26.6 2.4 3.5 25 25.0 1.81 33.4 1.9 3.0 4.2 32 32.0 2.011/4 42.1 2.4 3.8 5.1 40 40.0 2.511/2 48.1 2.7 4.4 5.8 50 50.0 3.22 60.2 3.4 5.4 7.0 63 63.0 4.021/2 75.0 4.7 75 75.0 4.73 88.7 5.0 8.06 90 90.0 5.74 114.1 6.4 10.3 110 110.0 6.9
125 125.0 7.95 140.0 8.8 140 140.0 8.86 168.0 9.4 12.3 160 160.0 10.0
200 200.0 12.58 218.0 12.2 225 225.0 14.1
10 272.6 10.5 250 250.0 9.6 15.612 323.4 12.4 315 315.0 12.1 19.7
21/2" and 5" pipes are PN10 rated315mm is rated at PN8
Size Minimum mean Minimum wall thickness (mm) Size Minimum mean Minimum wall thickness(nominal bore) outside diameter outside diameter outside diameter (mm)
(imperial) (mm) Class B Class C Class D Class E Class T (mm) (mm) PN6 PN10
Imperial System (BS 5391) Metric System (BS 5556)
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945012
Index to ABS Imperial FittingsNote: Two-dimensional Auto-CAD drawings are available on www.durapipe.co.uk
Reducing sockets(plain)page 15
Socket union threaded adaptorspage 19
Pipe (plain)page 14
Sockets (plain)page 15
‘O’ ring sockets (plain)page 15
Bends 221⁄2°long radius (plain)page 17
Bends 45°long radius (plain)page 17
Bends 90°long radius (plain)page 17
Bends 90°short radius (plain)page 17
Socket union plain adaptorspage 19
Socket unions (plain)page 19
Caps (plain)page 19
Tees 45° (plain)page 18
Reducing bushes(plain/threaded)page 20
Sockets(plain/threaded)page 20
Imperial/Metric socketadaptors (plain)page 20
Socket union nutspage 20
Sockets (threaded)page 23
Elbows 90°(plain/threaded)page 23
Composite unionsmale brasspage 22
Composite unionsfemale brass page 22
Adaptorsfemale (plain)/male (threaded)page 22
Adaptorsfemale (plain)/male (threaded)page 21
Hose adaptors(threaded)page 22
Adaptorsmale (plain)/female (threaded)page 21
Barrel nipples(plain/threaded)page 21
Hexagon nipples(plain/threaded)page 21
Tank connectors(plain/threaded)page 23
Tees 90° (plain)page 18
Elbows 90° (plain)page 16
Elbows 45° (plain)page 16
Reducing bushes(plain)page 16
Saddles (plain)page 15
Tees 90° (swept plain)page 18
Tees 90° (reducing)page 18
email: [email protected] web: www.durapipe.co.uk 13
Reducing bushes(threaded)page 25
Elbows 90° (threaded)page 24
Flanges full face(drilled and undrilled)pages 25-26
Caps (threaded)page 24
Hexagon nipples(threaded)page 23
Back nuts (threaded)page 24
Plugs (threaded)page 24
Durapipe one-stepsolvent cement andEco-cleaner page 31
Saddle clipspage 30
Gaskets full facepage 28
‘O’ ringspage 27
Valve support platespage 30
Backing ringspage 29
Cobra clipspage 30
Gaskets flatpage 27
VK Double union ballvalves (manual)page 31
Multiport ball valvespage 32
VM Diaphragm valvespage 34
Single union ball check valves page 33
Air release valvespage 33
Y type strainerspage 33
Pressure relief valvespage 34
FK Butterfly valves(manual) page 35
Flanges blanking(drilled and undrilled)pages 26-27
Flanges stub serratedpage 26
* For details of our full range of manual and actuated valves please ask for a copy of Valves Technical Catalogue D0894
* *
* * * * *
*
Class T 173 psig (12 bar after threading)Mean OD Thickness Length Weight Code
Size d1 t(mm) (m) kg/m
3⁄8 17.1 3.5 6 0.16 01 514 1011⁄2 21.4 3.6 6 0.22 01 5141023⁄4 26.7 3.6 6 0.28 01 514 1031 33.6 4.3 6 0.43 01 514 10411⁄4 42.2 5.3 6 0.65 01 514 10511⁄2 48.3 6.0 6 0.85 01 514 1062 60.3 7.2 6 1.28 01 514 107
Class E 217psig (15 bar)Mean OD Thickness Length Weight Code
Size d1 t(mm) (m) kg/m
3⁄8 17.1 1.7 6 0.09 01 513 1011⁄2 21.4 2.0 6 0.13 01 513 1023⁄4 26.7 2.5 6 0.20 01 513 1031 33.6 3.1 6 0.31 01 513 10411⁄4 42.2 3.9 6 0.49 01 513 10511⁄2 48.3 4.5 6 0.64 01 513 1062 60.3 5.6 6 1.00 01 513 1073 88.9 8.3 6 2.16 01 513 1094 114.3 10.6 6 3.59 01 513 110
Class D 173psig (12 bar)Mean OD Thickness Length Weight Code
Size d1 t(mm) (m) kg/m
6 168.3 12.8 6 6.50 01 512 112
Class C 130psig (9 bar)Mean OD Thickness Length Weight Code
Size d1 t(mm) (m) kg/m
1 33.6 2.0 6 0.21 01 511 10411⁄4 42.2 2.5 6 0.32 01 511 10511⁄2 48.3 2.8 6 0.42 01 511 1062 60.3 3.6 6 0.67 01 511 10721⁄2 75.2 5.0 5 1.14 11 555 3123 88.9 5.2 6 1.40 01 511 1094 114.3 6.6 6 2.32 01 511 1105 140.2 9.3 5 3.97 11 555 3166 168.3 9.9 6 5.12 01 511 1128 219.1 12.7 6 8.57 01 511 113
Class B 87psig (6 bar)Mean OD Thickness Length Weight Code
Size d1 t (mm) (m) kg/m
10 273.1 11.1 6 9.50 01 510 11412 323.9 13.1 6 13.30 01 510 115
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945014
ABS Pipe Imperial System plain
d1 (mean)
t (mean)
* Note - 21/2" & 5" pipes dimensionally compatible with 75mm and 140mmPN10 Metric series and are manufactured in accordance with the generalrequirements of DIN 8061/8062.
email: [email protected] web: www.durapipe.co.uk 15
‘O’ ring sockets
Sockets plain
PressureSize A B C Z1 Class gms Code
2 74 78 27 4 D 111 01 305 1073 108 104 37 4 D 359 01 305 1094 136 132 49 6 D 616 01 305 1106 201 191 74 8 C 2353 01 305 1128 255 248 94 14 B 3229 01 305 113
‘O’ rings EPDM
B
Z1
A
B
A
C
Z1
B
A
Z1
C
B
E
AZ1
pipecentre
line
Size A B Z1 gms Code3⁄8 21 32 2 4 01 100 1011⁄2 26 38 2 6 01 100 1023⁄4 32 43 3 12 01 100 1031 41 50 3 24 01 100 10411⁄4 52 60 4 41 01 100 10511⁄2 60 66 2 62 01 100 1062 74 78 4 114 01 100 10721⁄2 88 94 4 230 11 100 3123 108 104 4 355 01 100 1094 136 135 5 595 01 100 1105 171 163 7 1390 11 100 3166 201 191 9 2269 01 100 1128 257 249 11 3668 01 100 113
Reducing sockets
Saddles plain
Size A B C Z1 gms Code3⁄4 x 1⁄2 32 44 26 7 11 01 114 1221 x 3⁄4 41 53 33 9 19 01 114 124
11⁄4 x 1 52 63 41 10 39 01 114 12511⁄2 x 11⁄4 59 68 51 8 58 01 114 127
2 x 11⁄2 74 82 59 12 100 01 114 1303 x 2 108 114 75 26 320 01 114 1354 x 3 136 136 108 20 558 01 114 1416 x 4 205 213 140 55 1975 01 114 1478 x 6 256 263 198 50 3410 01 114 152
Size A B E Z1 gms Code
2 x 11⁄4 60 136 48 33 90 01 126 1293 x 11⁄2 76 140 60 46 158 01 126 1344 x 2 95 140 74 58 230 01 126 1406 x 2 71 154 73 86 225 01 126 146
Two saddles can be mounted diametrically opposite
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945016
Reducing bushes plain
Elbows 45° plain
Elbows 90° plain
BZ1
����
����
Z1
A
C
Size A C Z1 gms Code3⁄8 21 20 6 8 01 119 1011⁄2 27 26 8 9 01 119 1023⁄4 33 33 12 15 01 119 1031 41 37 13 25 01 119 10411⁄4 52 44 15 59 01 119 10511⁄2 60 50 18 86 01 119 1062 82 66 27 160 01 119 10721⁄2 90 63 17 300 11 119 3123 112 94 40 750 01 119 1094 139 115 50 1300 01 119 1105 173 115 37 1980 11 119 3166 198 134 41 2390 01 119 1128 259 182 65 5620 01 119 113
Size A C Z1 gms Code3⁄8 21 24 9 6 01 115 1011⁄2 26 29 12 11 01 115 1023⁄4 32 34 14 19 01 115 1031 41 41 17 35 01 115 10411⁄4 52 49 21 70 01 115 10511⁄2 60 56 26 101 01 115 1062 74 68 31 191 01 115 10721⁄2 90 83 38 385 11 115 3123 111 104 52 720 01 115 1094 141 130 65 1505 01 115 1105 173 153 76 2390 11 115 3166 203 175 85 4075 01 115 1128 256 251 112 6900 01 115 113
Size B Z1 gms Code1⁄2 x 3⁄8 17 2 7 01 109 1213⁄4 x 1⁄2 20 3 8 01 109 1221 x 1⁄2 23 6 23 01 109 1231 x 3⁄4 24 4 15 01 109 124
*11⁄4 x 1⁄2 28 12 21 01 109 116*11⁄4 x 3⁄4 28 8 24 01 109 11711⁄4 x 1 28 5 20 01 109 125
*11⁄2 x 1⁄2 30 13 26 01 109 118*11⁄2 x 3⁄4 30 10 37 01 109 119*11⁄2 x 1 30 7 40 01 109 12611⁄2 x 11⁄4 31 4 19 01 109 127*2 x 3⁄4 38 15 45 01 109 120*2 x 1 38 15 45 01 109 128*2 x 11⁄4 38 11 57 01 109 1292 x 11⁄2 37 7 42 01 109 130
21⁄2 x 2 44 8 75 01 109 131*3 x 11⁄2 51 21 130 01 109 134*3 x 2 51 15 178 01 109 135
3 x 21⁄2 50 6 126 01 109 136*4 x 3 65 12 277 01 109 1415 x 4 78 15 413 01 329 142
*6 x 4 93 27 666 01 109 1476 x 5 90 13 641 01 329 148*8 x 6 110 23 1185 01 109 152
*Relief configuration (see drawing insert)
A
Z1
C
email: [email protected] web: www.durapipe.co.uk 17
Bends 90° short radius plain
Bends 90° long radius plain
Bends 45° long radius plain
Bends 221⁄2° long radius
Z1
C
A
Size A C Z1 gms Code1⁄2 26 56 43 20 01 118 1023⁄4 33 65 45 45 01 118 1031 40 85 63 65 01 118 10411⁄4 51 108 81 130 01 118 10511⁄2 62 134 102 290 01 118 1062 73 165 126 560 01 118 10721⁄2 93 195 150 810 11 118 3123 111 226 172 1445 01 118 1094 140 280 216 2400 01 118 110
CR
E
C
R
E
Size C E R gms Code
1 75 37 102 51 01 310 10411⁄2 113 55 152 156 01 310 1062 152 73 203 322 01 310 10721⁄2 300 113 300 429 11 310 3123 238 121 305 1100 01 310 1094 300 145 407 2290 01 310 1105 512 280 560 5315 11 310 3166 440 218 610 6290 01 310 1128 592 280 812 11440 01 310 113
10 940 520 1016 20289 01 310 11412 1030 520 1220 26348 01 310 115
Tolerance on angle ±3°
Size C E R gms Code
1 76 38 102 46 01 311 10411⁄2 110 57 152 143 01 311 1062 113 73 203 274 01 311 10721⁄2 172 112 300 319 11 311 3123 202 114 305 857 01 311 1094 262 152 407 1886 01 311 1105 322 210 560 2513 11 311 3166 385 229 610 5154 01 311 1128 503 305 812 8962 01 311 113
10 711 508 1016 15607 01 311 11412 750 508 1220 19702 01 311 115
Tolerance on angle ±3°
R
C
E
Size C E R gms Code3 403 98 305 1535 01 309 1094 545 138 407 3440 01 309 1105 840 280 560 6696 11 309 3166 817 207 610 9430 01 309 1128 1174 362 812 19070 01 309 113
10 1550 534 1016 29372 01 309 11412 1754 534 1220 39305 01 309 115
Tolerance on angle ±3°
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945018
C
Z1
BAZ1
B
A
Z1
Z3
C
Z2
����������������������������
�������
C
Z1
D
A
Z3
Z2B
A
D
Z1
C
Z1B
Tees 90° plain
Tees 90° reducing
Tees 90° swept plain
Tees 45° plain
Size A B C Z1 gms Code3⁄8 21 49 25 10 7 01 122 1011⁄2 26 58 29 11 13 01 122 1023⁄4 32 69 34 15 23 01 122 1031 41 83 42 19 43 01 122 10411⁄4 52 101 50 23 92 01 122 10511⁄2 59 113 53 25 133 01 122 1062 74 137 70 31 249 01 122 10721⁄2 90 172 87 36 510 11 122 3123 113 204 105 44 926 01 122 1094 143 244 121 54 1960 01 122 1105 172 307 153 72 3200 11 122 3166 205 355 175 88 4449 01 122 1128 257 468 240 100 9600 01 122 113
Size A B C D Z1 gms Code3⁄4 x 1⁄2 32 64 32 26 17 22 01 124 1221 x 1⁄2 40 70 36 26 17 40 01 124 1231 x 3⁄4 40 76 38 32 20 41 01 124 124
Size A B C D Z1 Z2 Z3 gms Code
1 41 115 79 79 57 57 14 85 01 148 104
11⁄2 62 160 105 105 74 74 24 285 01 148 106
2 78 195 125 125 87 87 32 515 01 148 107
21⁄2 92 210 125 125 81 81 41 601 11 148 312
4 139 315 190 190 127 127 62 2080 01 148 110
Swept tees are Class C rated
Size A B C Z1 Z2 Z3 gms Code1⁄2 28 68 44 34 27 7 30 01 128 1023⁄4 33 81 52 41 32 8 45 01 128 1031 41 97 63 49 39 9 80 01 128 10411⁄4 50 117 80 61 52 10 194 01 128 10511⁄2 60 140 97 80 67 12 298 01 128 1062 74 170 113 90 73 15 546 01 128 107
email: [email protected] web: www.durapipe.co.uk 19
Caps plain
Socket unions plain
Socket union plain adaptors
Socket union threaded adaptors
B
A
B
A
Size A B gms Code3⁄8 23 19 5 01 206 1011⁄2 28 22 7 01 206 1023⁄4 34 25 11 01 206 1031 43 30 21 01 206 10411⁄4 53 38 37 01 206 10511⁄2 58 44 48 01 206 1062 74 53 82 01 206 107
Size A B gms Code3⁄8 21 23 10 01 207 1011⁄2 25 26 14 01 207 1023⁄4 29 32 22 01 207 1031 42 34 36 01 207 10411⁄4 55 39 46 01 207 10511⁄2 61 46 61 01 201 1062 76 58 112 01 207 107
B
Z2Z1
A
B
A
Size A B gms Code3⁄8 21 17 3 01 140 1011⁄2 26 22 5 01 140 1023⁄4 32 25 9 01 140 1031 40 30 20 01 140 10411⁄4 52 35 33 01 140 10511⁄2 59 39 48 01 140 1062 74 47 90 01 140 107
*21⁄2 94 59 180 11 149 3123 109 65 268 01 140 1094 136 84 465 01 140 110
* 21/2" End Cap PN10 rated
Size A B Z1 Z2 gms Code3⁄8 38 44 5 10 25 01 205 1011⁄2 46 49 5 10 36 01 205 1023⁄4 52 55 5 10 51 01 205 1031 63 65 7 12 86 01 205 10411⁄4 72 77 10 14 122 01 205 10511⁄2 80 92 13 16 160 01 205 1062 101 112 15 19 297 01 205 107*21⁄2 135 107 8 13 610 11 205 3123 155 113 6 4 750 01 205 1094 180 138 7 6 1155 01 205 110
* 21/2" PN103" and 4" are Class CEPDM seal as standardFor FPM seal order by type 204
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945020
B
Z1
A
BZ1
BC
Z1
A
B
A
Socket union nuts
Imperial/metric socket adaptors plain
Sockets plain/BSP taper threaded
Reducing bushes plain/BSP taper threaded
Size A B gms Code3⁄8 39 23 10 01 208 1011⁄2 43 25 14 01 208 1023⁄4 51 27 20 01 208 1031 64 29 32 01 208 10411⁄4 72 26 39 01 208 10511⁄2 79 23 51 01 208 1062 102 32 96 01 208 107
Size A B Z1 gms Code1⁄2 x 20 26 37 3 7 11 345 1023⁄4 x 25 31 41 3 12 11 345 1031 x 32 40 49 3 25 11 345 104
11⁄4 x 40 50 58 2 45 11 345 10511⁄2 x 50 59 67 3 62 11 345 106
2 x 63 74 78 2 114 11 345 1073 x 90 107 105 3 355 11 345 1094 x 110 134 130 6 690 11 345 1106 x 160 195 183 8 1660 11 345 112
Size A B C Z1 gms Code1⁄2 27 38 17 4 8 01 101 1023⁄4 33 44 20 2 14 01 101 1031 42 51 23 5 30 01 101 10411⁄4 52 55 22 4 46 01 101 10511⁄2 60 61 26 2 65 01 101 1062 75 70 29 2 114 01 101 1073 110 107 52 3 378 01 101 109
Size B Z1 gms Code1⁄2 x 3⁄8 17 6 4 01 111 1213⁄4 x 1⁄2 20 5 7 01 111 1221 x 3⁄4 23 6 12 01 111 124
email: [email protected] web: www.durapipe.co.uk 21
Barrel nipples plain/BSP taper threaded
Hexagon nipples male plain/BSP taper threaded
Size A B D gms Code3⁄8 24 36 11 7 01 107 1011⁄2 30 42 15 12 01 107 1023⁄4 36 48 16 30 01 107 1031 46 56 20 40 01 107 10411⁄4 46 60 21 50 01 107 10511⁄2 55 63 22 58 01 107 1062 72 74 26 91 01 107 107
B
D
A(A/F)
Size B D gms Code
3 128 30 252 01 316 1094 153 36 525 01 316 110
B
D
Adaptors male/female plain/BSP taper threaded
Size A B Z1 gms Code1⁄2 27 38 16 8 01 153 1023⁄4 36 44 18 14 01 153 1031 43 50 21 24 01 153 10411⁄4 55 60 22 49 01 153 10511⁄2 63 66 25 68 01 153 1062 78 78 29 129 01 153 107
Z1
B
A
Adaptors female/male plain/BSP taper threaded
Size A B D Z1 gms Code3⁄8 22 35 10 20 5 01 151 1011⁄2 27 45 12 28 9 01 151 1023⁄4 35 48 14 28 14 01 151 103
Z1
B
A
D
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945022
B
Z1
D
A(A/F)
Z1
A(A/F)
B
Z2
B
Z1
A(A/F)
BD
A(A/F)
C
E
Adaptors female/male plain/BSP taper threaded
Composite unions plain/BSP parallel threaded female brass
Composite unions plain/BSP taper threaded male brass
Hose adaptors BSP threaded
Size A B D Z1 gms Code
1 46 58 19 35 36 01 151 10411⁄4 56 66 22 38 70 01 151 10511⁄2 72 75 22 43 115 01 151 1062 80 85 26 46 150 01 151 107
Size A B Z1 Z2 gms Code1⁄2 40 42 3 7 165 01 212 1023⁄4 48 49 3 9 290 01 212 1031 55 59 11 12 310 01 212 10411⁄4 65 68 9 10 450 01 212 10511⁄2 79 75 12 14 800 01 212 1062 88 90 14 14 950 01 212 107
Fitted with brass retaining nutBrass material to BS2872, WRAS approved
Size A B Z1 gms Code1⁄2 40 54 3 175 01 217 1023⁄4 48 74 3 320 01 217 1031 55 86 8 420 01 217 10411⁄4 65 94 10 620 01 217 10511⁄2 78 108 13 1000 01 217 1062 88 129 15 1200 01 217 107
Fitted with brass retaining nut. Brass material to BS2872, WRAS approved
Size A B C D E gms Code1⁄2 26 60 41 13 14 8 01 157 1023⁄4 28 66 41 16 20 15 01 157 1031 40 73 46 19 27 28 01 157 104
email: [email protected] web: www.durapipe.co.uk 23
A
Z1
C
Z1
B
A
B
D
A(A/F)
B
D
A(A/F)F C
Tank connectors plain/BSP threaded
Elbows 90° plain/BSP taper threaded
Sockets plain/BSP taper threaded
Hexagon nipples plain/BSP taper threaded
Size A B C D F gms Code1⁄2 28 70 38 28 15 26 01 235 1023⁄4 33 77 38 38 21 30 01 235 103
Size A C Z1 gms Code1⁄2 26 34 17 26 01 116 1023⁄4 32 36 20 34 01 116 1031 40 41 23 63 01 116 10411⁄2 62 57 30 136 01 116 1062 75 66 35 203 01 116 107
Size A B gms Code1⁄2 26 38 12 01 102 1023⁄4 33 43 22 01 102 1031 41 51 34 01 102 10411⁄4 51 54 60 01 102 10511⁄2 62 63 87 01 102 1062 75 72 132 01 102 1073 110 107 437 01 102 109
Size A B D gms Code3⁄8 24 38 14 6 01 106 1011⁄2 30 46 18 12 01 106 1023⁄4 36 50 19 30 01 106 1031 46 59 13 40 01 106 10411⁄4 46 67 27 55 01 106 10511⁄2 55 73 29 75 01 106 1062 72 81 33 125 01 106 107
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945024
B
D
A(A/F)
B
A(A/F)C
A
Z1
C
B
A
D
Back nuts BSP threaded
Plugs plain/BSP taper threaded
Caps plain/BSP taper threaded
Elbows 90° plain/BSP taper threaded
Size A B C gms Code3⁄8 25 11 29 5 01 159 1011⁄2 28 13 38 8 01 159 1023⁄4 33 13 38 15 01 159 1031 45 16 54 18 01 159 10411⁄4 50 18 58 19 01 159 10511⁄2 60 19 69 31 01 159 1062 79 21 91 65 01 159 107
Size A B D gms Code3⁄8 11 19 10 3 01 155 1011⁄2 13 23 14 5 01 155 1023⁄4 14 28 15 8 01 155 1031 17 30 17 12 01 155 10411⁄4 22 35 22 30 01 155 10511⁄2 27 38 22 36 01 155 1062 37 45 26 50 01 155 107
Size A C Z1 gms Code1⁄2 26 29 17 27 01 117 1023⁄4 32 33 19 39 01 117 1031 41 41 23 65 01 117 10411⁄2 63 57 30 141 01 117 1062 75 67 35 212 01 117 107
Size A B D gms Code3⁄8 26 20 16 5 01 141 1011⁄2 27 20 16 6 01 141 1023⁄4 36 23 17 10 01 141 1031 44 28 21 18 01 141 10411⁄4 55 31 22 33 01 141 10511⁄2 63 35 25 50 01 141 1062 78 40 28 90 01 141 1073 111 65 53 262 01 141 109
email: [email protected] web: www.durapipe.co.uk 25
A
Z1
DB
B
D
A(A/F)
Reducing bushes BSP threaded
Flanges full face plain/drilled
BS10 Table D/ENo. of Hole
Size A B D Z1 P.C.D. Holes Diameter gms Code1⁄2 96 21 10 4 67 4 14 68 01 130 1023⁄4 105 24 10 4 73 4 14 78 01 130 1031 115 27 10 4 83 4 14 107 01 130 10411⁄4 140 33 10 5 87 4 14 122 01 130 10511⁄2 150 37 10 5 98 4 14 154 01 130 1062 166 45 10 6 115 4 18 223 01 130 1073 199 60 11 8 145 4 18 398 01 130 109
*4 220 72 14 6 178 8 18 638 01 130 1106 284 98 22 8 235 8 22 1340 01 130 112
*4" BS10 Table D has 4 holes and should be ordered as 01 317 110
BS4504 Table 16/3-10/3No. of Hole
Size A B D Z1 P.C.D. Holes Diameter gms Code1⁄2 96 21 10 4 65 4 14 68 01 319 1023⁄4 105 24 10 4 75 4 14 78 01 319 1031 115 27 10 4 85 4 14 107 01 319 10411⁄4 140 33 10 5 100 4 18 122 01 319 10511⁄2 150 37 10 5 110 4 18 154 01 319 1062 166 45 10 6 125 4 18 223 01 319 1073 199 60 11 8 160 8 18 398 01 319 1094 220 72 14 6 180 8 18 638 01 319 1106 284 98 22 8 240 8 22 1340 01 319 112
ANSI Class 150No. of Hole
Size A B D Z1 P.C.D. Holes Diameter gms Code1⁄2 96 21 10 4 60 4 14 68 01 322 1023⁄4 105 24 10 4 70 4 14 78 01 322 1031 115 27 10 4 80 4 14 107 01 322 10411⁄2 150 37 10 5 98 4 14 154 01 322 1062 166 45 10 6 121 4 18 223 01 322 1073 199 60 11 8 152 4 18 398 01 322 1094 220 72 14 6 190 8 18 638 01 322 1106 284 98 22 8 241 8 22 1340 01 322 112
Size A B D gms Code1⁄2 x 3⁄8 24 25 10 5 01 113 1213⁄4 x 1⁄2 30 27 11 10 01 113 1221 x 3⁄4 36 31 12 13 01 113 124
Male thread taper Female thread parallel
Note: Durapipe backing rings must be used in conjunction with full face flanges
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945026
B
A
BS10 Table D/ENo. of Hole
Size A B P.C.D. Holes Diameter gms Code2 165 13 115 4 18 235 01 313 1073 197 19 145 4 18 520 01 313 109
*4 214 19 178 8 18 720 01 313 1106 286 26 235 8 22 1575 01 313 1128 337 26 292 8 22 2300 01 313 113
*4" BS10 Table D has 4 holes and should be ordered as 01 326 110
BS4504 Table 16/3 (1⁄2" to 8") 10/3 (1⁄2" to 6")No. of Hole
Size A B P.C.D. Holes Diameter gms Code2 165 13 125 4 18 235 01 323 10721⁄2 186 19 145 4 18 568 11 323 3123 197 19 160 8 18 520 01 323 1094 214 19 180 8 18 720 01 323 1105 251 26 210 8 18 1338 11 323 3166 286 26 240 8 22 1575 01 323 1128 337 26 295 12 22 2300 01 323 113
ANSI Class 150No. of Hole
Size A B P.C.D. Holes Diameter gms Code2 165 13 121 4 18 235 01 325 1073 197 19 152 4 18 520 01 325 1094 214 19 190 8 18 720 01 325 1106 286 26 241 8 22 1575 01 325 1128 337 26 298 8 22 2300 01 325 113
B
D
Z1
A
A
Z1
DB
Flanges full face plain/undrilled
Flanges stub serrated
Flanges blanking drilled
Size A B D Z1 gms Code1⁄2 96 21 10 4 75 01 129 1023⁄4 105 24 10 4 85 01 129 1031 115 27 10 4 111 01 129 10411⁄4 140 32 10 4 130 01 129 10511⁄2 150 36 10 5 160 01 129 1062 165 45 11 6 233 01 129 1073 199 60 11 8 414 01 129 1094 220 73 14 6 657 01 129 1106 284 99 22 8 1417 01 129 112
Size A B D Z1 gms Code
2 96 40 14 3 90 01 135 10721⁄2 106 49 10 4 150 11 135 3123 127 57 18 6 200 01 135 1094 159 69 20 6 350 01 135 1105 180 83 14 7 680 11 135 3166 213 104 24 11 805 01 135 1128 269 132 26 14 2075 01 135 113
*10 326 155 29 8 2650 01 139 114*12 378 178 33 9 3900 01 139 115
*Taper back flange (see drawing insert)
Note: Durapipe backing rings must be used in conjunction with fullface flanges
Note: Durapipe backing rings must be used in conjunction with blank flanges
email: [email protected] web: www.durapipe.co.uk 27
B
A
B
A
B
Flanges blanking undrilled
Gaskets flat stub flange EPDM
‘O’ ring for socket union
Size A B gms Code
1 116 13 140 01 131 10411⁄2 150 13 185 01 131 1062 166 13 235 01 131 1073 197 19 520 01 131 1094 214 19 720 01 131 1106 286 26 1575 01 131 1128 337 26 2300 01 131 113
EPDM Viton (FPM)Size B gms Code Code3⁄8 3.5 0.5 03 209 101 03 211 1011⁄2 3.5 1 03 209 102 03 211 1023⁄4 3.5 2 03 209 103 03 211 1031 3.5 3 03 209 104 03 211 10411⁄4 5.2 5 03 209 105 03 211 10511⁄2 5.2 6 03 209 106 03 211 1062 5.3 7 03 209 107 03 211 10721⁄2 5.3 3 13 209 312 13 211 3123 5.0 5 03 209 109 03 211 1094 4.9 6 03 209 110 03 211 110
Size A B gms Code
2 97 3.0 21 03 431 10721⁄2 106 3.0 22 13 411 3123 128 3.0 23 03 431 1094 160 3.9 36 03 431 1105 180 4.0 60 13 411 3166 214 3.9 74 03 431 1128 269 4.0 92 03 431 11310 327 4.1 186 03 411 11412 378 3.9 218 03 411 115
Note: Durapipe backing rings must be used in conjunction withblank flanges
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945028
Gaskets full face drilled EPDM
B
A
BS10 Table D/ENo. of Hole
Size A B P.C.D. Holes Diameter gms Code1⁄2 95 3.0 67 4 14 31 03 410 1023⁄4 112 3.0 73 4 14 37 03 410 1031 115 3.0 83 4 14 37 03 410 10411⁄4 121 3.0 87 4 14 41 03 410 10511⁄2 133 3.0 98 4 14 55 03 410 1062 153 3.0 115 4 18 56 03 410 1073 184 3.0 145 4 18 98 03 410 109
*4 216 3.2 178 8 18 112 03 410 1106 250 3.1 235 8 22 160 03 410 112
*4" BS10 Table D has 4 holes and should be ordered as 03 409 110
BS4504 Table 16/3-10/3No. of Hole
Size A B P.C.D. Holes Diameter gms Code1⁄2 95 3.0 65 4 14 31 03 408 1023⁄4 112 3.0 75 4 14 37 03 408 1031 115 3.0 85 4 14 37 03 408 10411⁄4 121 3.0 100 4 18 41 03 408 10511⁄2 133 3.0 110 4 18 55 03 408 1062 153 3.0 125 4 18 56 03 408 1073 184 3.0 160 8 18 98 03 408 1094 216 3.2 180 8 18 112 03 408 1106 280 3.1 240 8 22 160 03 408 112
ANSI Class 150No. of Hole
Size A B P.C.D. Holes Diameter gms Code1⁄2 95 3.0 60 4 14 31 03 426 1023⁄4 112 3.0 70 4 14 37 03 426 1031 115 3.0 80 4 14 37 03 426 10411⁄2 133 3.0 98 4 14 55 03 426 1062 153 3.0 121 4 18 56 03 426 1073 184 3.0 152 4 18 98 03 426 1094 216 3.2 190 8 18 112 03 426 1106 280 3.1 241 8 22 160 03 426 112
email: [email protected] web: www.durapipe.co.uk 29
B
ADK
Backing rings galvanised mild steel drilled
BS10 Table D/ENo. of Hole Bolt Weight
Size A B D K Holes Dia. Size gms Code1⁄2 89 6 35 67 4 14 M12x50 270 03 416 1023⁄4 103 7 45 73 4 14 M12x50 300 03 416 103
1 114 6 49 83 4 14 M12x50 380 03 416 104
11⁄4 120 7 60 87 4 14 M12x50 380 03 416 105
11⁄2 135 7 68 98 4 14 M12x50 480 03 416 106
2 153 8 78 115 4 18 M16x65 880 03 416 107
21⁄2 165 8 92 127 4 18 M16x65 - 31 416 312
3 187 9 110 145 4 18 M16x70 1040 03 416 109
*4 216 9 140 178 8 18 M16x80 1330 03 416 110
6 282 11 195 235 8 22 M20x90 2340 03 416 112
8 340 10 255 292 8 22 M20x100 2870 03 416 113
†10 405 15 308 356 12 22 M20x130 5870 03 407 114
12 458 21 364 406 12 26 M24x150 8990 03 407 115
*4" BS10 Table D has 4 holes and should be ordered as 03 415 110†10" only available in BS10 Table E drilling. The bore of the 10" and 12"backing rings is machined to mate with the taper of the stub flanges
BS4504 Table 16/3 (1⁄2" to 12") 10/3 (1⁄2" to 6")No. of Hole Bolt Weight
Size A B D K Holes Dia. Size gms Code1⁄2 96 6 35 65 4 14 M12x50 310 03 421 1023⁄4 106 6 45 75 4 14 M12x50 330 03 421 103
1 114 6 49 85 4 14 M12x50 390 03 421 104
11⁄4 141 6 60 100 4 18 M16x50 580 03 421 105
11⁄2 153 6 68 110 4 18 M16x50 880 03 421 106
2 165 8 78 125 4 18 M16x65 1020 03 421 107
21⁄2 186 9 92 145 4 18 M16x65 1280 13 421 312
3 200 8 110 160 8 18 M16x70 1310 03 421 109
4 221 8 140 180 8 18 M16x80 1370 03 421 110
5 251 11 167 210 8 18 M16x90 2060 13 421 316
6 286 11 195 240 8 22 M20x90 2460 03 421 112
8 339 11 255 295 12 22 M20x100 2780 03 421 113
10 405 15 308 355 12 26 M24x130 5850 03 403 114
12 458 21 364 410 12 26 M24x150 8990 03 407 115
BS4504 Table 10/3 (8")No. of Hole Bolt Weight
Size A B D K Holes Dia. Size gms Code8 339 11 255 295 8 22 M20x100 2870 04 996 131
ANSI Class 150No. of Hole Bolt Weight
Size A B D K Holes Dia. Size gms Code1⁄2 89 6 35 60 4 14 M12x50 240 03 425 1023⁄4 98 6 45 70 4 14 M12x50 270 03 425 103
1 108 6 49 80 4 14 M12x50 330 03 425 104
11⁄4 118 6 60 90 4 14 M12x50 400 03 425 105
11⁄2 128 6 68 98 4 14 M12x50 420 03 425 106
2 153 8 78 121 4 18 M16x65 790 03 425 107
3 191 8 110 152 4 18 M16x65 1200 03 425 109
4 230 9 140 190 8 18 M16x70 1580 03 425 110
6 280 11 195 241 8 22 M20x90 2230 03 425 112
8 340 12 255 298 8 22 M20x100 3060 03 425 113
Note: The 8" backing ring drilled 10/3 is intended for use in conjunction with the8" FK Butterfly valve.
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945030
CM
L
EB
BS4504 Table 16/3 (1⁄2" to 8") 10/3 (1⁄2" to 6")Size B C E L M N Weight Code
gms1⁄2 95 86 50 14 16 2 370 03 458 1023⁄4 106 89 75 14 16 2 450 03 458 1031 143 99 75 14 16 2 560 03 458 10411⁄4 152 105 75 14 16 2 950 03 458 10511⁄2 151 105 74 14 16 2 1150 03 458 1062 166 127 101 14 17 2 1380 03 458 10721⁄2 185 144 125 14 22 2 2500 31 459 3123 201 143 127 14 22 2 1650 03 458 1094 222 161 151 14 24 3 2550 03 458 1106 286 217 228 14 33 3 4100 03 458 1128 340 242 280 14 31 3 6250 03 458 113
N = No. of holes in base
Valve support plates galvanised mild steel drilled
BG
C
A
D
G E
C
F
Cobra pipe clips Polypropylene
Size A B C D G Bolt/Screw size gms Code3⁄8 – 35 25 19 16 M.4/3BA/No 8 7 13 434 3051⁄2 – 35 30 14 16 M.5/1BA/No 10 8 13 434 3063⁄4 – 35 35 16 17 M.5/1BA/No 10 11 13 434 3071 – 40 40 17 17 M.5/1BA/No 10 14 13 434 30811⁄4 75 45 45 20 20 M.5/1BA/No 10 21 13 434 30911⁄2 85 50 50 22 21 M.6/0BA/No 10 30 13 434 3102 102 60 60 19 21 M.6/0BA/No 10 42 13 434 31121⁄2 122 70 70 27 31 M.8 94 13 434 3123 148 80 90 39 31 M.8 121 13 434 3134 171 90 96 36 35 M.8 185 13 434 3145 211 156 132 40 40 M.8 252 13 434 316
6 243 170 150 40 40 M.8 330 13 434 317
Clips of size 1" and above are fitted with retaining strapBolts/screws not supplied
Saddle clips Polypropylene
Size C E F G Bolt/Screw size gms Code3⁄8 13 37 – 14 M.4/3BA/No 8 3 03 455 1011⁄2 18 41 – 14 M.4/3BA/No 8 4 03 455 1023⁄4 21 45 – 16 M.5/2BA/No 10 6 03 455 103
1 23 56 – 16 M.5/2BA/No 10 7 03 455 104
11⁄4 29 65 – 16 M.5/2BA/No 10 11 03 455 105
11⁄2 34 67 – 16 M.5/2BA/No 10 12 03 455 106
2 38 87 – 22 M.6/0BA/No 12 25 03 455 107
3 50 122 8 34 M.10/3⁄8UNC 45 03 455 109
4 65 156 13 38 M.10/3⁄8UNC 70 03 455 110
Backing plate shown dotted supplied with 3" and 4" onlyBolts/screws not suppliedBolt holes in 3" and 4" clips are not countersunk
email: [email protected] web: www.durapipe.co.uk 31
Durapipe one-step solvent cement and Eco-cleaner
gms Code CodeLitres ABS cement Eco-cleaner ABS cement Eco-cleaner
125ml* 03 461 3940.5 500 500 03 461 395 03 457 3951.0 1100 – 03 461 396 –
VK Double union ball valves Manual – EPDM seals
Options:FPM seals (plain ends) order H0 VKB ***FPM seals (threaded ends) order H0 VKB ***
Manual valves can be supplied with locking kits - further information is availablefrom our Valve Department.
d DN PN L Z H E B C g CodePlain Threaded
3/8 10 16 14.5 74 103 55 49 66 195 H0 VKA 101 -1/2 15 16 16.5 70 103 55 49 66 195 H0 VKA 102 H0 VKA B023/4 20 16 19 77 115 66 59 75 315 H0 VKA 103 H0 VKA B03
1 25 16 22.5 83 128 75 66 85 435 H0 VKA 104 H0 VKA B04
11/4 32 16 26 94 146 87 75 97 655 H0 VKA 105 H0 VKA B05
11/2 40 16 30 104 164 100 87 110 880 H0 VKA 106 H0 VKA B06
2 50 16 36 127 199 122 101 134 1560 H0 VKA 107 H0 VKA B07
21/2 65 10 44 147 235 154 124 235 2945 H0 VKA 312 H0 VKA B08
3 80 10 51 168 270 189 142 285 4935 H0 VKA 109 H0 VKA B09
4 100 10 63 182 308 221 166 335 7750 H0 VKA 110 H0 VKA B10
* 125ml size with roller-applicatorOnly Durapipe ABS solvent cement should be used for jointing of ABS pipework systems
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945032
Multiport ball valves Plain FPM – L port
Position 1 Position 2 Position 3 Operation 90º 180º 180º
L Diverting and isolating
T Diverting or mixing
C Diverting and mixing (has transflow position 10º to 80º)
= flow
D
B
Z
H A
E
Z1
Size Z Z1 A B D E H gms Code
3⁄8 68 49 48 101 58 65 117 236 H0 MLB 1011⁄2 68 49 48 101 58 65 117 221 H0 MLB 1023⁄4 79 66 59 118 66 85 148 375 H0 MLB 103
1 89 74 69 134 67 97 163 554 H0 MLB 104
11⁄4 104 82 81 158 78 109 185 809 H0 MLB 105
11⁄2 107 98 96 167 88 128 228 1180 H0 MLB 106
2 125 109 113 197 88 145 248 1828 H0 MLB 107
Options: L Port T Port C PortPlain FPM HO MLB *** H0 MTB *** H0 MCB ***Threaded FPM HO MLB B** H0 MTB B** H0 MCB B**
Manual valves can be supplied with locking kits - further information is available fromour Valve Department.
Size Z A B gms Code3⁄8 62 48 95 109 H0 SRA 1011⁄2 62 48 95 100 H0 SRA 1023⁄4 73 59 112 165 H0 SRA 103
1 79 69 124 250 H0 SRA 104
11⁄4 94 96 148 610 H0 SRA 105
11⁄2 88 96 148 575 H0 SRA 106
2 105 103 177 798 H0 SRA 107
3 114 178 215 2757 H0 SRA 109
email: [email protected] web: www.durapipe.co.uk 33
Single union ball check valves Plain ends – EPDM seals
Air release valves Plain ends – FPM seals
Y type strainer Plain ends – EPDM seals
Z B
ASize Z A B gms Code3⁄8 62 48 95 109 H0 VAB 1011⁄2 62 48 95 100 H0 VAB 1023⁄4 73 59 112 165 H0 VAB 103
1 79 69 124 250 H0 VAB 104
11⁄4 94 96 148 610 H0 VAB 105
11⁄2 88 96 148 575 H0 VAB 106
2 105 103 177 798 H0 VAB 107
Z
B
A
Size Z Z1 A B C E H gms Code1⁄2 40 54 30 84 48 110 66 88 H0 RVA 1023⁄4 47 64 36 97 50 130 77 120 H0 RVA 103
1 53 68 44 110 62 150 90 196 H0 RVA 104
11⁄4 90 99 61 154 85 210 122 528 H0 RVA 105
11⁄2 83 99 61 154 85 210 122 450 H0 RVA 106
2 104 122 77 180 95 265 144 685 H0 RVA 107
B
Z1(THREADED)
Z
A
E H
C
Options:EPDM seals (threaded ends) order H0 SRA B**FPM seals (plain ends) order H0 SRB ***FPM seals (threaded ends) order H0 SRB B**
Note: Threaded version incorporates threaded union adaptor only - socket end tobody of valve plain.
Options:FPM seals (threaded ends) order H0 VAB B**
Note: Threaded version incorporates threaded union adaptor only - socket end tobody of valve plain.
Options:EPDM seals (threaded ends) order H0 RVA B**FPM seals (plain ends) order H0 RVB ***FPM seals (threaded ends) order H0 RVB B**
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945034
VM Diaphragm valves Manual – plain spigot ends EPDM
Pressure relief valves EPDM seals
C
ZEG
B
A
D
F
Size Z A B C D E F G kg Code1⁄2 92 143 20.5 35 124 M6 25 12 0.7 H0 PRA 1023⁄4 106 143 20.5 35 144 M6 25 12 0.7 H0 PRA 103
1 108 143 25.0 35 154 M6 25 12 0.7 H0 PRA 104
11⁄4 120 204 36.0 50 174 M8 44.5 16 1.5 H0 PRA 105
11⁄2 130 204 39.5 50 194 M8 44.5 16 1.5 H0 PRA 106
2 146 219 49.0 50 224 M8 44.5 16 2.4 H0 PRA 107
Options:FPM seals order H0 PRB 2**
Options:FPM diaphragm order H0 VMB ***PTFE diaphragm order H0 VMC ***
Manual valves can be supplied with locking kits - further information is available fromour Valve Department.
d DN PN B B1 H h H1 I J L g Code
1/2 15 10 95 26 124 12 90 25 M6 16 700 H0 VMA 2023/4 20 10 95 26 144 12 90 25 M6 19 700 H0 VMA 203
1 25 10 95 26 154 12 90 25 M6 23 700 H0 VMA 204
11/4 32 10 126 40 174 18 115 44.5 M8 27 1500 H0 VMA 205
11/2 40 10 126 40 194 18 115 44.5 M8 32 1500 H0 VMA 206
2 50 10 148 40 224 18 140 44.5 M8 39 2400 H0 VMA 207
21/2 65 10 225 55 284 23 215 100 M12 44 7000 H0 VMA 208
3 80 10 225 55 300 23 215 100 M12 51 7000 H0 VMA 209
4 100 10 295 69 350 23 250 120 M12 - 10500 H0 VMA 210
email: [email protected] web: www.durapipe.co.uk 35
Size DN PN B2 B3 C C1 g U Code
21⁄2 65 10 80 164 272 110 1470 4 H0 FKA 1083 80 10 93 178 272 110 1870 8 H0 FKA 1094 100 10 107 192 272 110 2220 8 H0 FKA 1105 125 10 120 212 330 110 3100 8 H0 FKA 1116 150 10 134 225 330 110 3850 8 H0 FKA 1128 200 10 161 272 420 122 6750 8 H0 FKA 113
FK Butterfly valves Glass reinforced polypropylene with ABS disc
Size DN PN B1 B2 B3 G G1 G2 G3 g U Code
21⁄2 65 10 80 174 146 48 135 39 125 2400 4 HV FKA 1083 80 10 93 188 160 48 135 39 125 2800 8 HV FKA 1094 100 10 107 202 174 48 135 39 125 3150 8 HV FKA 1105 125 10 120 222 194 48 144 39 200 4450 8 HV FKA 1116 150 10 134 235 207 48 144 39 200 5200 8 HV FKA 1128 200 10 161 287 256 65 204 60 200 9300 8 HV FKA 11310 250 10 210 317 281 88 236 76 250 18600 12 HV FKA 11412 300 8 245 374 338 88 236 76 250 25600 12 HV FKA 115
hand operated
with gear box
Options:FPM seals order HV FKB ***
Options:FPM seals order H0 FKB ***
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945036
Elbows 90°page 39
Elbows 45°page 39
Reducerspage 39
Pipepage 37
Bends 90°page 40
Fabricated bends 90°page 40
Sockets page 38
Reducing bushespage 38
Tees 90° equalpage 40
Tees 90°, swept plainpage 41
Single union ball check valves page 50
Multiport ball valvespage 49
FK Butterfly valves(manual)page 52
Pipe trayspage 53
De-burring toolspage 53
Wheel cutterspage 53
VM Manual diaphragm valvespage 51
Air release valvespage 50
Y type strainerspage 50
Pressure relief valvespage 51
VK Double union ballvalves (manual)page 48
Durapipe one-stepsolvent cement andEco-cleaner page 48
Flat gaskets/stub flangespage 47
‘O’ rings for socket unionspage 47
Cobra pipe clipspage 48
Backing ringspage 46
Valve support plates page 45
Blank flangespage 45
Stub flanges serratedpage 45
Hose adaptorspage 44
Wall bracketspage 44
Male compositeunionspage 44
Female compositeunions page 44
Male threadedadaptors page 43
Socket union nutspage 43
Socket union threaded adaptorspage 42
Socket union plain adaptorspage 42
Female threadedadaptorspage 43
Imperial/metric socketadaptorspage 43
Socket unionspage 42
Tees 45°, plainpage 41
Caps, plainpage 42
Tees 90° reducingpage 41
* For details of our full range of manual and actuated valves please ask for a copy of Valves Technical Catalogue D0894.
*
* * * *
* * *
Index to ABS Metric FittingsNote: Two-dimensional Auto-CAD drawings are available on www.durapipe.co.uk
email: [email protected] web: www.durapipe.co.uk 37
Da
t
ABS Pipe Metric System plain
PN10Size Nom Thickness Mean Weight Length Code
Bore t BoreDa DN mm mm kg/m m
16 10 1.5 13.0 0.07 5 11 555 305
20 15 1.6 16.8 0.10 5 11 555 306
25 20 1.9 21.2 0.14 5 11 555 307
32 25 2.1 27.8 0.21 5 11 555 308
40 32 2.7 34.6 0.33 5 11 555 309
50 40 3.4 43.2 0.52 5 11 555 310
63 50 4.2 54.6 0.81 5 11 555 311
75 65 5.0 65.0 1.14 5 11 555 312
90 80 6.0 78.0 1.65 5 11 555 313
110 100 7.3 95.4 2.45 5 11 555 314
125 110 8.2 108.6 3.13 5 11 555 315
140 125 9.3 121.4 3.97 5 11 555 316
160 150 10.5 139.0 5.13 5 11 555 317
200 175 13.2 173.6 8.06 5 11 555 318
225 200 14.8 195.4 10.17 5 11 555 319
250 250 16.1 217.8 12.31 5 11 555 320
*315 300 20.8 273.4 20.00 5 11 555 323
* 315mm is PN8 rated
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945038
B
Z1
A
BZ1
BZ1
Sockets
Reducing bushes
Size A B Z1 gms Code
16 21 31 3 5 11 100 30520 25 37 3 7 11 100 30625 31 42 2 12 11 100 30732 41 49 3 25 11 100 30840 50 58 4 45 11 100 30950 62 68 4 77 11 100 31063 78 81 4 154 11 100 31175 88 93 3 230 11 100 31290 107 108 4 380 11 100 313
110 126 131 7 690 11 100 314125 146 149 7 1040 11 100 315140 171 163 7 1390 11 100 316160 182 184 8 1660 11 100 317200 223 220 8 2390 11 100 318225 260 250 11 3470 11 100 319250 286 272 10 5760 11 100 320315 355 339 11 9780 11 100 323
Size B Z1 gms Code
20 x 16 17 3 2 11 109 41225 x 20 19 3 4 11 109 41532 x 16 23 9 5 11 109 41732 x 25 23 8 6 11 109 41940 x 32 28 6 13 11 109 42350 x 20* 33 17 32 11 109 42450 x 25* 33 13 29 11 109 42550 x 32* 32 11 19 11 109 42650 x 40 32 5 25 11 109 42763 x 25* 39 20 60 11 109 42963 x 32* 39 16 36 11 109 43063 x 50 39 7 47 11 109 43275 x 63 46 7 65 11 109 43890 x 50* 54 23 200 11 109 44290 x 63* 54 15 224 11 109 44390 x 75 55 9 110 11 109 444
110 x 63* 64 25 252 11 109 449110 x 90 64 10 200 11 109 451125 x 110 72 9 220 11 109 459140 x 125 79 8 260 11 109 467160 x 90 89 35 320 11 109 473160 x 110* 89 27 405 11 109 474160 x 140 89 10 460 11 109 476200 x 160 110 21 109 11 109 487225 x 160* 122 33 1600 11 109 495225 x 200* 122 13 1250 11 109 496250 x 225* 132 12 2230 11 109 499315 x 250* 165 33 5080 11 109 503
*Configuration shown in inset
email: [email protected] web: www.durapipe.co.uk 39
B
d3
Z1
d1 d2
Reducers
d3 d2 d1 B Z1 gms Code25 20 16 37 6 6 11 114 41232 25 20 42 6 12 11 114 41540 32 25 50 8 22 11 114 41950 40 32 60 11 39 11 114 42363 50 40 71 11 80 11 114 42775 63 50 85 14 108 11 114 43290 75 63 98 13 190 11 114 438
110 90 75 115 16 350 11 114 444125 110 90 140 21 480 11 114 451140 125 110 156 20 690 11 114 459160 140 125 170 20 1000 11 114 467200 160 140 193 23 2180 11 114 476225 200 160 237 41 2530 11 114 487
Z1
A
C
Elbows 45°Size A C Z1 gms Code16 21 20 5 5 11 119 30520 25 22 5 7 11 119 30625 31 26 7 14 11 119 30732 40 31 8 27 11 119 30840 50 37 10 54 11 119 30950 62 45 13 100 11 119 31063 82 54 16 180 11 119 31175 90 63 17 300 11 119 31290 112 70 18 550 11 119 313
110 137 90 27 950 11 119 314125 155 103 31 1350 11 119 315140 173 115 37 1980 11 119 316160 190 125 35 2920 11 119 317200 230 167 44 3460 11 119 318225 260 174 51 4920 11 119 319250 286 189 58 5900 11 119 320315 359 230 66 11880 11 119 323
A
Z1
C
Elbows 90°Size A C Z1 gms Code16 20 24 10 6 11 115 30520 25 28 11 10 11 115 30625 31 34 15 17 11 115 30732 40 41 18 35 11 115 30840 50 47 20 68 11 115 30950 62 59 26 129 11 115 31063 78 71 31 230 11 115 31175 90 83 38 385 11 115 31290 112 100 49 690 11 115 313
110 136 125 63 1220 11 115 314125 155 140 63 1720 11 115 315140 173 153 76 2390 11 115 316160 190 172 79 3600 11 115 317200 231 219 110 4300 11 115 318225 260 240 119 6550 11 115 319250 286 319 188 9560 11 115 320315 359 400 236 17910 11 115 323
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945040
Z1
C
A
CR
E
Bends 90°
Fabricated bends 90°
Size A C Z1 gms Code
20 26 57 40 18 11 118 30625 33 69 50 38 11 118 30732 41 87 64 75 11 118 30840 51 107 80 135 11 118 30950 62 132 100 245 11 118 31063 78 165 126 470 11 118 31175 93 195 150 810 11 118 31290 111 234 180 1350 11 118 313
110 140 284 220 2570 11 118 314
Size C E R gms Code
125 750 250 500 4790 11 309 315140 840 280 560 6700 11 309 316160 960 320 640 10040 11 309 317200 1200 400 800 19480 11 309 318225 13350 450 900 27850 11 309 319
C
Z1
BAZ1
Tees 90° equal
Size A B C Z1 gms Code16 21 47 25 10 7 11 122 30520 25 57 30 12 12 11 122 30625 31 67 34 15 24 11 122 30732 40 81 43 18 48 11 122 30840 50 99 50 23 87 11 122 30950 62 119 62 28 160 11 122 31063 78 146 70 34 300 11 122 31175 90 172 87 36 510 11 122 31290 112 205 104 46 900 11 122 313
110 132 248 128 60 1650 11 122 314125 154 276 143 67 2300 11 122 315140 172 307 153 72 3200 11 122 316160 190 350 176 87 4800 11 122 317200 231 430 210 106 5800 11 122 318225 259 480 239 120 7700 11 122 319250 286 518 259 128 10160 11 122 320315 360 652 326 162 19390 11 122 323
email: [email protected] web: www.durapipe.co.uk 41
A
D
Z1
C
Z1B
����������������������������
�������
C
Z1
D
A
Z3
Z2B
Tees 90° reducing
Tees 90° swept
Size A B C D Z1 gms Code25 x 20 31 67 31 25 14 22 11 124 41532 x 20 40 81 35 25 18 40 11 124 41832 x 25 40 81 37 31 18 41 11 124 41940 x 20 50 98 39 25 22 72 11 124 42140 x 25 50 98 41 31 22 72 11 124 42250 x 20 62 119 44 29 27 104 11 124 42450 x 25 62 119 46 31 27 140 11 124 42550 x 32 62 119 50 40 27 140 11 124 42663 x 25 78 146 53 31 34 250 11 124 42963 x 32 78 146 57 40 34 250 11 124 43075 x 32 91 168 62 41 40 391 11 124 43575 x 40 91 168 66 50 40 398 11 124 43675 x 50 91 168 71 61 40 406 11 124 43775 x 63 91 168 78 76 40 428 11 124 43890 x 40 109 198 74 50 48 642 11 124 44190 x 50 109 198 79 61 48 649 11 124 44290 x 63 109 198 86 76 48 664 11 124 44390 x 75 109 198 92 91 48 693 11 124 444
110 x 50 133 244 92 61 61 1165 11 124 448110 x 63 133 244 99 76 61 1173 11 124 449110 x 75 133 244 105 91 61 1188 11 124 450110 x 90 133 244 112 109 61 1210 11 124 451
Size A B C D Z1 Z2 Z3 gms Code
32 41 115 79 79 57 57 14 90 11 148 30850 62 160 105 105 74 74 24 259 11 148 31063 78 195 125 125 87 87 32 480 11 148 31175 92 210 125 125 81 81 41 601 11 148 312
110 139 315 190 190 127 127 62 2235 11 148 314
B
A
Z3
Z1
C
Z2
Tees 45° plain
Size A B C Z1 Z2 Z3 gms Code20 28 68 43 6 26 34 30 11 418 30625 33 81 52 7 29 55 45 11 418 30732 41 98 65 9 42 52 80 11 418 30840 50 117 77 11 51 65 135 11 418 30950 60 140 95 12 63 78 195 11 418 31063 74 169 114 13 76 93 410 11 418 311
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945042
B
A
B
A
B
Z2Z1
A
Caps plain
Socket unions
Socket union plain adaptors
Size A B Weight Codegms
16 21 16 3 11 149 30520 25 21 5 11 149 30625 31 24 8 11 149 30732 41 30 19 11 149 30840 50 35 30 11 149 30950 62 41 53 11 149 31063 78 50 106 11 149 31175 94 59 180 11 149 31290 112 70 300 11 149 313110 136 84 570 11 149 314
Size A B Z1 Z2 Weight Codegms
16 33 42 3 10 19 11 205 30520 41 47 3 10 29 11 205 30625 50 53 3 10 46 11 205 30732 58 64 8 11 70 11 205 30840 73 78 10 13 140 11 205 30950 80 92 13 15 154 11 205 31063 101 111 14 20 270 11 205 31175 135 107 8 13 720 11 205 31290 157 115 7 4 750 11 205 313110 183 138 8 7 1115 11 205 314
EPDM seal as standardFor FPM seal order by type 204
Size A B Weight Codegms
16 22 17 4 11 206 30520 27 20 7 11 206 30625 36 23 13 11 206 30732 41 31 20 11 206 30840 53 38 42 11 206 30950 59 45 45 11 206 31063 74 53 82 11 206 311
B
A
Socket union threaded adaptorsSize A B Weight Code
gms
16 22 25 6 11 207 30520 27 27 10 11 207 30625 36 30 19 11 207 30732 42 33 24 11 207 30840 53 40 45 11 207 30950 60 47 50 11 201 31063 74 58 97 11 207 311
email: [email protected] web: www.durapipe.co.uk 43
B
Z1
A
Z1
Z2
B
d1 d2 AT
B
A
Socket union nuts
Imperial/metric socket adaptors
Female threaded adaptors BSP taper female threaded reinforced
Size A B Weight Codegms
16 34 18 6 11 208 30520 40 19 9 11 208 30625 50 21 12 11 208 30732 57 23 18 11 208 30840 73 27 36 11 208 30950 80 29 49 11 208 31063 102 32 83 11 208 311
Size Weightd2 d1 T* A B Z1 Z2 gms Code
16- 12- 3⁄8 24 28 11 16 7 11 153 33120- 16- 1⁄2 30 35 15 21 14 11 153 33325- 20- 3⁄4 38 39 16 22 21 11 153 33532- 25- 1 45 45 18 26 42 11 153 33740- 32- 11⁄4 56 54 21 31 69 11 153 33950- 40- 11⁄2 64 60 21 33 108 11 153 34163- 50- 2 78 72 25 41 169 11 153 343
*Thread size designation
Size A B Z1 Weight Codegms
*1⁄2 - 20 26 37 3 11 11 345 102*3⁄4 - 25 31 41 3 23 11 345 103*1 - 32 40 49 3 40 11 345 104*11⁄4 - 40 50 58 2 80 11 345 105*11⁄2 - 50 59 67 3 160 11 345 106*2 - 63 74 78 2 230 11 345 107*3 - 90 107 105 3 340 11 345 109*4 - 110 134 130 6 675 11 345 110*6 - 160 195 183 8 1890 11 345 112
*Sizes shown in imperial n.b. designation
Male threaded adaptors BSP taper male thread
B
Z1
D
A(A/F)d2 d1
Size Weightd2 d1 T* A B D Z1 gms Code
16- 12- 3⁄8 19 35 11 22 7 11 151 33120- 16- 3⁄8 24 38 12 24 7 11 151 33220- 16- 1⁄2 24 42 15 28 7 11 151 33325- 20- 1⁄2 30 46 15 28 13 11 151 33425- 20- 3⁄4 30 48 16 31 14 11 151 33532- 25- 1⁄2 36 51 15 32 23 11 151 35232- 25- 3⁄4 36 52 16 33 23 11 151 33632- 25- 1 36 55 19 36 23 11 151 33740- 32- 1 46 58 20 36 36 11 151 33840- 32- 11⁄4 46 60 21 37 38 11 151 33950- 40- 11⁄4 55 66 22 39 70 11 151 34050- 40- 11⁄2 55 66 21 39 70 11 151 34163- 50- 11⁄2 72 73 22 41 115 11 151 34263- 50- 2 72 78 26 46 123 11 151 34375- 63- 2 80 84 26 46 150 11 151 345
*Thread size designation
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945044
Female composite unions ABS/Brass, BSP parallel female thread
Male composite unions ABS/Brass, BSP taper male thread
Wall brackets ABS/brass body
Z1
A(A/F)
B
Z2
B
Z1
A(A/F)
BA
Z2
Z1 C
D
Size A B Z1 Z2 Weight Codegms
16 x 3⁄8* 32 37 3 7 105 11 216 305
20 x 1⁄2* 40 43 3 7 175 11 216 306
25 x 3⁄4* 48 47 3 7 320 11 216 307
32 x 1* 55 59 8 9 420 11 216 308
40 x 11⁄4* 65 68 10 8 620 11 216 309
50 x 11⁄2* 78 76 12 9 1000 11 216 310
63 x 2* 88 89 12 11 1200 11 216 311
*Thread sizes designationBrass retaining nut and EPDM rubber seal
Size A B Z1 Z2 Weight Codegms
16 x 3⁄8* 32 48 3 9 100 11 217 305
20 x 1⁄2* 40 54 3 9 165 11 217 306
25 x 1⁄4* 48 74 3 10 250 11 217 307
32 x 1* 55 86 8 11 310 11 217 308
40 x 11⁄4* 65 94 10 11 450 11 217 309
50 x 11⁄2* 78 108 12 12 800 11 217 310
63 x 2* 88 126 12 14 950 11 217 311
*Thread sizes designation Brass retaining nut and EPDM rubber seal
Size A B C D Z1 Z2 Weight Codegms
16- 3⁄8* 15 4.5 6 19 17 9 180 31 422 326
20- 1⁄2* 16.5 4.5 6 19 18 9 185 31 422 327
25- 1⁄2* 20 4.5 5 24 19 11 215 31 422 328
25- 3⁄4* 20 4.5 5 24 19 11 200 31 422 329
*Thread sizes designation
D
B
Hose adaptors spigot end
Size B D Weight Codegms
16 60 25 8 11 158 30520 75 30 13 11 158 30625 80 35 20 11 158 30732 90 40 32 11 158 308
email: [email protected] web: www.durapipe.co.uk 45
B
AK
L
B
D
Z1
A
Stub flanges serrated face
Blank flanges
Size A B D Z1 gms Code
16 29 17 6 3 5 11 135 30520 34 20 6 3 8 11 135 30625 41 22 7 3 13 11 135 30732 50 26 7 3 19 11 135 30840 61 30 8 3 36 11 135 30950 73 35 8 3 60 11 135 31063 90 42 9 4 100 11 135 31175 106 49 10 4 150 11 135 31290 125 59 11 6 240 11 135 313
110 149 68 12 6 370 11 135 314125 165 76 13 5 520 11 135 315140 180 83 14 7 680 11 135 316160 205 93 16 5 930 11 135 317200* 252 114 17 6 1520 11 135 318225 273 126 24 6 1360 11 135 319250 306 140 20 9 2140 11 135 320315 375 180 32 14 5000 11 135 323
*The 200mm stub flange when used in conjunction with backingring code number 421 318 has a bolt circle diameter whichmatches 225 (DN 200) valves and fittings.
DIN 2501 16 bar/PN16No. Weight
Size A B K L Holes gms Code
32 116 13 85 14 4 139 11 323 30840 141 13 100 18 4 204 11 323 30950 153 13 110 18.5 4 237 11 323 31063 166 19 124 18 4 447 11 323 31175 186 19 145 18.5 4 568 11 323 31290 201 19 159 18 8 645 11 323 313
110 221 26 180 18 8 715 11 323 314125 251 26 210 18 8 1338 11 323 315140 251 26 210 18 8 1338 11 323 316160 286 27 240 23 8 1720 11 323 317
Note: Durapipe backing rings must be used in conjunction with blankflanges
CM
L
EB
K
Valve support plates galvanised iron
DIN 2501 16 bar/PN16No. Weight
Size B C E K L M N Holes gms Code16 91 84 50 61 14 16 2 4 370 31 459 30520 97 86 49 65 14 16 2 4 640 31 459 30625 105 89 76 75 14 16 2 4 750 31 459 30732 114 96 77 85 14 12 2 4 860 31 459 30850 150 125 100 110 14 22 2 4 1480 31 459 31063 160 134 100 125 14 24 2 4 2100 31 459 31175 185 144 125 145 14 22 2 4 2500 31 459 31290 203 150 127 160 14 23 2 8 2660 31 459 313
110 214 160 150 179 14 22 3 8 2960 31 459 314
N = No. of holes in base
ANSI CLASS 150No. Weight
Size A B K L Holes gms Code
20 90 8 61 16 4 300 13 448 30625 100 8 70 16 4 380 13 448 30732 110 9 79 16 4 480 13 448 30840 118 8 90 16 4 530 13 448 30950 129 8 99 16 4 590 13 448 31063 154 10 121 19 4 1050 13 448 31190 192 11 153 19 4 1470 13 448 313
110 230 11 190 19 8 2080 13 448 314
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945046
B
AK
L
Backing rings galvanised mild steel
DIN 2501 16bar/PN16No. Weight
Size A B K L Holes gms Code
16 90 7 61 14 4 240 13 421 30520 96 6 65 14 4 300 13 421 30625 106 7 75 14 4 320 13 421 30732 116 7 85 14 4 350 13 421 30840 142 7 100 18 4 420 13 421 30950 152 7 110 18 4 710 13 421 31063 165 8 125 18 4 1010 13 421 31175 186 9 145 18 4 1280 13 421 31290 201 9 160 18 8 1380 13 421 313
110 220 9 180 18 8 1430 13 421 314125 253 8 210 18 8 1960 13 421 315140 251 11 210 18 8 2060 13 421 316160 286 11 240 22 8 2700 13 421 317200 340 11 295 22 12 3830 13 420 318225 340 11 295 22 12 3190 13 420 319250 405 16 355 26 12 9450 13 420 320315 460 20 410 26 12 8400 13 420 323
DIN 2501 10bar/PN10No. Weight
Size A B K L Holes gms Code
200 340 11 295 22 8 3830 13 421 318225 340 11 295 22 8 3190 13 421 319250 396 16 350 22 8 9450 13 421 320315 448 20 402 22 12 8400 13 421 323
*The 200mm (NW175) stub flange supplied by Durapipe when used inconjunction with backing ring; code number 421 318 has a bolt circlediameter which matches 225mm (NW200) valves and fittings (295mm)
email: [email protected] web: www.durapipe.co.uk 47
B
A
B
Flat gaskets/stub flanges
‘O’ ring for socket unions
Weight EPDMSize A B gms Code
16 29 3.0 2 13 411 30520 34 3.5 2 13 411 30625 41 3.5 3 13 411 30732 50 3.0 4 13 411 30840 60 3.0 4 13 411 30950 72 3.3 5 13 411 31063 90 4.0 10 13 411 31175 106 3.0 20 13 411 31290 125 3.1 30 13 411 313
110 150 4.0 40 13 411 314125 166 4.0 50 13 411 315140 180 4.0 60 13 411 316160 205 4.0 70 13 411 317200 253 4.0 120 13 411 318225 274 3.8 165 13 411 319250 306 4.0 170 13 411 320280 330 4.0 190 13 411 321315 379 4.2 220 13 411 323
EPDM Viton (FPM)Size B gms Code Code
12 2.7 0.4 13 209 304 13 211 30416 2.5 0.5 13 209 305 13 211 30520 3.4 1 13 209 306 13 211 30625 3.4 2 13 209 307 13 211 30732 3.4 3 13 209 308 13 211 30840 5.3 5 13 209 309 13 211 30950 5.3 6 13 209 310 13 211 31063 5.3 7 13 209 311 13 211 31175 5.3 8 13 209 312 13 211 31290 5.0 11 13 209 313 03 211 109
110 4.9 24 13 209 314 03 211 110
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945048
Durapipe one-step solvent cement and Eco-cleaner
gms Code CodeLitres ABS cement Eco-cleaner ABS cement Eco-cleaner
125ml* 03 461 3940.5 550 500 03 461 395 03 457 3951.0 1100 – 03 461 396 –
VK Double union ball valves Manual – EPDM seals
Cobra pipe clips
BG
C
A
D
Size A B C D G Bolt/Screw gms Code
*12 – 24 25 15 16 M4/3BA/No 8 5 13 434 304*16 – 35 25 17 16 M4/3BA/No 8 7 13 434 305*20 – 35 30 14 16 M5/1BA/No 10 8 13 434 306*25 – 35 35 16 17 M5/1BA/No 10 11 13 434 30732 65 45 40 17 17 M5/1BA/No 10 14 13 434 30840 75 65 45 20 20 M5/1BA/No 10 21 13 434 30950 85 50 50 22 21 M6/0BA/No 10 30 13 434 31063 102 60 60 19 21 M6/0BA/No 10 42 13 434 31175 122 70 70 27 31 M8 94 13 434 31290 148 80 90 39 31 M8 121 13 434 313
110 171 90 96 36 35 M8 184 13 434 314125 204 144 132 40 40 M8 237 13 434 315140 211 156 132 40 40 M8 252 13 434 316160 243 170 150 40 40 M8 330 13 434 317
*Without retaining clips. Bolts/screws not supplied
Options:FPM seals (plain ends) order H0 VKB ***
For threaded versions refer to Imperial Valves section
d DN PN L Z H E B C g Code
16 10 16 14 75 103 55 49 66 200 H0 VKA 305
20 15 16 16 71 103 55 49 66 195 H0 VKA 306
25 20 16 19 77 115 66 59 75 310 H0 VKA 307
32 25 16 22 84 128 75 66 85 440 H0 VKA 308
40 32 16 26 94 146 87 75 97 645 H0 VKA 309
50 40 16 31 102 164 100 87 110 880 H0 VKA 310
63 50 16 38 123 199 122 101 134 1490 H0 VKA 311
75 65 10 44 147 235 154 124 235 2945 H0 VKA 312
90 80 10 51 168 270 189 142 285 5110 H0 VKA 313
110 100 10 61 186 308 221 166 335 7845 H0 VKA 314
Valves can be supplied as electrically or pneumatically actuated. Further details are available in our full Valves Technical Catalogue D0894 or interactive CD. Please ask for copies.
* 125ml size with roller-applicator
Only Durapipe ABS solvent cement should be used for jointing of ABS pipework systems
email: [email protected] web: www.durapipe.co.uk 49
Size Position 1 Position 2 Position 3 Operation0º 90º 180º
L Diverting and isolation
T Diverting or mixing
C Diverting and mixing (has transflow position 10º to 80º)
= flow
Multiport ball valves Plain FPM – L port
D
B
Z
H A
E
Z1
Size Z Z1 A B D E H gms Code
16 68 49 48 101 58 65 117 236 H0 MLB 30520 68 49 48 101 58 65 117 221 H0 MLB 30625 79 66 59 118 66 85 148 375 H0 MLB 30732 89 74 69 134 67 97 163 554 H0 MLB 30840 104 82 81 158 78 109 185 809 H0 MLB 30950 107 98 96 167 88 128 228 1180 H0 MLB 31063 125 109 113 197 88 145 248 1828 H0 MLB 311
Options: T Port C PortPlain FPM H0 MTB *** H0 MCB ***
For threaded versions refer to Imperial Valves section
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945050
Single union ball check valves Plain ends – EPDM seals
Air release valves Plain ends – FPM seals
Y type strainers Plain ends – EPDM seals
Z
B
A
Z B
A
B
Z1(THREADED)
Z
A
E H
C
Size Z A B gms Code
16 62 48 95 109 H0 SRA 305
20 62 48 95 100 H0 SRA 306
25 73 59 112 165 H0 SRA 307
32 79 69 124 250 H0 SRA 308
40 94 96 148 610 H0 SRA 309
50 88 96 148 575 H0 SRA 310
63 105 103 177 798 H0 SRA 311
90 114 178 215 2757 H0 SRA 313
Options:FPM seals (plain ends) order H0SRB ***
For threaded versions refer to Imperial Valves section
Size Z A B gms Code
16 62 48 95 109 H0 VAB 305
20 62 48 95 100 H0 VAB 306
25 73 59 112 165 H0 VAB 307
32 79 69 124 250 H0 VAB 308
40 94 96 148 610 H0 VAB 309
50 88 96 148 575 H0 VAB 310
63 105 103 177 798 H0 VAB 311
Options:For threaded versions refer to Imperial Valves section
Options:FPM seals (plain ends) order H0 RVB ***
For threaded versions refer to Imperial Valves section
Size Z Z1 A B C E H gms Code
20 40 54 30 84 48 110 66 88 H0 RVA 306
25 47 64 36 97 50 130 77 120 H0 RVA 307
32 53 68 44 110 62 150 90 196 H0 RVA 308
40 90 99 61 154 85 210 122 528 H0 RVA 309
50 83 99 61 154 85 210 122 450 H0 RVA 310
63 104 122 77 180 95 265 144 685 H0 RVA 311
email: [email protected] web: www.durapipe.co.uk 51
Pressure relief valves EPDM seals
VM Diaphragm valves Manual – EPDM seals
Options:FPM diaphragm order HO VMB ***PTFE diaphragm order HO VMC ***
Manual Valves can be supplied with locking kits - further information is available fromour Valve Department.
C
ZEG
B
A
D
F
Size Z A B C D E F G kg Code
20 92 143 20.5 35 124 M6 25 12 0.7 HO PRA 406
25 106 143 20.5 35 144 M6 25 12 0.7 HO PRA 407
32 108 143 25.0 35 154 M6 25 12 0.7 HO PRA 408
40 120 204 36.0 50 174 M8 44.5 16 1.5 HO PRA 409
50 130 204 39.5 50 194 M8 44.5 16 1.5 HO PRA 410
63 146 219 49.0 50 224 M8 44.5 16 2.4 HO PRA 411
Options:FPM seals order HO PRB ***
d DN PN B B1 H h H1 I J L g Code
20 15 10 95 26 124 12 90 25 M6 16 700 HO VMA 406
25 20 10 95 26 144 12 90 25 M6 19 700 HO VMA 407
32 25 10 95 26 154 12 90 25 M6 23 700 HO VMA 408
40 32 10 126 40 174 18 115 44.5 M8 27 1500 HO VMA 409
50 40 10 126 40 194 18 115 44.5 M8 32 1500 HO VMA 410
63 50 10 148 40 224 18 140 44.5 M8 39 2400 HO VMA 411
75 65 10 225 55 284 23 215 100 M12 44 7000 HO VMA 412
90 80 10 225 55 300 23 215 100 M12 51 7000 HO VMA 413
110 100 10 295 69 350 23 250 120 M12 - 10500 HO VMA 414
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945052
FK Butterfly valves Glass reinforced polypropylene with ABS disc
Size Z A A B C D E Weight Codemin max kg
75 46 64 72 242 272 46.5 165 1.8 H0 FKA 10890 49 72.5 80 267 272 64 185 2.0 H0 FKA 109110 56 85.5 95 296 272 84 211 2.3 H0 FKA 110140 64 102 107.5 330 330 108 240 3.7 H0 FKA 111160 70 115 121 356 330 134 268 4.7 H0 FKA 112225 71 140 149 433 420 187 323 6.5 H0 FKA 113
Size DN PN B1 B2 B3 G G1 G2 G3 g U Code
75 65 10 80 174 146 48 135 39 125 2400 4 HV FKA 10890 80 10 93 188 160 48 135 39 125 2800 8 HV FKA 109110 100 10 107 202 174 48 135 39 125 3150 8 HV FKA 110140 125 10 120 222 194 48 144 39 200 4450 8 HV FKA 111160 150 10 134 235 207 48 144 39 200 5200 8 HV FKA 112225 200 10 161 287 256 65 204 60 200 9300 8 HV FKA 113250 250 10 210 317 281 88 236 76 250 18600 12 HV FKA 114315 300 8 245 374 338 88 236 76 250 25600 12 HV FKA 115
hand operated
with gear box
Options:FPM seals order HV FKB ***
Options:FPM seals order H0 FKB ***
Note: Lugged versions available to special order. Please refer to our Valve Department forfurther details.
Valves can be supplied as electrically or pneumatically actuated. Further details are available in our full Valves Technical Catalogue D0894 or interactive CD. Please ask for copies.
email: [email protected] web: www.durapipe.co.uk 53
Pipe trays
De-burring tools
Wheel cutters
Pipe Standard Standard pack Productdiameter length pack quantity code
mm in metres in metres
16 3 90 FT 55 50 04
20 3 60 FT 55 50 06
25 3 36 FT 55 50 08
32 5 27 FT 55 50 11
ProductDescription code
E 16-25mm pipe inner and outer milling cutter tool FT 55 72 90
E 16-63mm pipe inner and outer milling cutter tool FT 55 65 12
32-160mm chamfering tool FT 55 05 10
ProductDescription code
16-63mm pipe cutter FT 80 00 01
50-125mm pipe cutter FT 80 00 03
16-63mm spare cutter wheel FT 80 00 02
50-125mm spare cutter wheel FT 80 00 04
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945054
Flow calculations liquid Pressure drop due to friction can be determined for practicalpurposes using the flow nomogram opposite. The pressure drop ata given flow rate can be determined as follows:
1. Obtain the internal diameter of the pipe to be used by referring to the table below
2. Mark this diameter on Scale A
3. Mark the required flow rate in litres per second on Scale B
4. Draw a straight line connecting the points on Scales A and B,and extend this to Scales C and D
5. The velocity of flow in metres per second is determined from theintersection with Scale C
6. The frictional head loss in metres per 100 metres of pipe canthen be read from Scale D
Fittings The calculation of pressure drop in fittings is more complex butcalculations can be made for equivalent lengths of straight pipeusing the formula E=F x D where:
E= equivalent pipe length (metres)F= fittings constant (see table below)D= fitting internal diameter (mm)
To calculate the total pressure drop in the system, the equivalentstraight pipe lengths for fittings is then added to the total straightpipe length to obtain the total drop.
Fittings Constant90º elbow 0.0345º elbow 0.0190º tee - straight through 0.0190º tee - side branch 0.0690º bend - 0.0145º bend - 0.01Reducing bush (per size reduction) 0.15Butterfly valves 0.13Diaphragm valves 0.23Check valves 0.05
The values are included as a guide to aid calculation of overallsystem performance and should not be used in isolation.
Flow Calculations for Gas The resistance to fluid flow is no less significant in pipeworksystems carrying gases. The calculation to determine actual systempressure drop is however, much more involved than that for liquidsand a simplified formula is usually applied which varies dependingon the specific application and flow parameters.
Imperial Class B Class C Class D Class E Class T3/8" 13.7 9.91/2" 17.4 13.83/4" 21.7 19.11" 29.6 27.4 24.6
11/4" 37.2 34.4 31.411/2" 42.7 39.3 35.92" 53.1 49.1 45.5
21/2" 65.03" 78.7 72.54" 101.1 93.1-5" 121.46" 148.5 142.78" 193.7-
10" 250.912" 297.7
Note: Dimensions are given for guidance only, please contact our Technical SupportDepartment for accurate information
Table of Pipe Internal DiametersClasses C to E in accordance with BS 5391 Part 1
Metric 10bar16 13.020 16.825 21.232 27.840 34.650 43.263 54.675 65.090 78.0110 95.4125 108.6140 121.4160 139.0200 173.6225 195.4250 217.8315* 273.4
315mm is PN8 rated
In accordance with ISO 161
Durapipe ABS Design and Installation Guide
email: [email protected] web: www.durapipe.co.uk 55
Flow Nomogram
0.01
0.02
0.05
0.1
0.2
0.30.40.5
1
2
345
20
304050
100
200
300400500
1000
2000
300040005000 300
200
100
500004000030000
20000
10000
500040003000
2000
1000
500400300
200
100
504030
20
10
543
2
1
m3/min.
0.05
0.1
0.15
0.2
0.3
0.4
0.5
1
1.5
2
3
4
5
10
15
20Approx. values only
0.01
0.02
0.03
0.04
0.05
0.1
0.2
0.3
0.4
0.5
1
2
3
4
5
10
20
Pressure Drop(m/100m)
Flow Velocity(m/s)
Flow RateL/sec L/min
Internal Diameter(mm)
Diagram for water at 10°C
15
20
30
40
50
60
70
80
90
100
150
200
250
300
350
400
500
25
35
A B C D
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945056
Calculating Expansion and Contraction
Temperature variations in a pipework system will increase ordecrease the length of each pipe. This is the result oftemperature changes in the fluid carried and also fromambient temperature variations.The rate of expansion or contraction of pipework is dependenton its length, its coefficient of expansion and the temperaturedifference.Increase/ decrease in pipe length is given by the formula:
Expansion = L x � x �T
where: L = length� = coefficient of linear expansion �T = temperature difference of the pipe
The coefficient of linear expansion for ABS: 10 x10-5
Rule of thumb: ABS expands/contracts 1mm/ m per 10°Ctemperature change:
Example:What is the expansion/contraction of an insulated, 30m long, ABS Condenser water main, installed at 15°C,operating at a maximum temperature of 35°C and a minimumtemperature of 5°C?
Expansion:L = 30,000 mm � = 10 x 10-5
�T = 35 - 15 = 20°C
Expansion = 30,000 x 10 x 10-5 x 20°C= 60mm
Contraction:L = 30,000 mm � = 10 x 10-5
�T = 15 - 5 = 10°C
Contraction = 30,000mm x 10 x 10-5 x 10°C= 30mm
Hence the system must be designed, using expansion loops,the natural flexibility of pipe, or expansion bellows, to cater fora total differential movement of 90mm with an expansion of60mm and a contraction of 30mm.
Catering for pipe movementSystems installed above ground should be designed to ensure thatthere are sufficient changes in direction to accommodate expansionand contraction. The support method described later will ensure thatthe pipework can move axially without snaking. If sufficient changes in direction are not available within the designof the system, alternative methods of catering for pipe movementcan be considered such as expansion loops or flexible rubberbellows.
Expansion LoopsThe length of unrestrained pipe (free leg length) required toaccommodate expansion can be calculated from the graph opposite.
Pipemovement
Fixed point (anchor point)
Pipe clip
Pipe freeto flex
Anchor Point
A
B
?
30m
email: [email protected] web: www.durapipe.co.uk 57
500
400
300
200
1009080706050
40
30
20
Example
15.15
1098765
4
3
2
0.1 0.2 0.3 0.4 0.5 0.6 0.8 1.0 1.51.4 2.0 2.5 3.0
H (m)
L (m
m)
2
3⁄8″ 16mm
1⁄2″ 20mm
3⁄4″ 25mm
11⁄4″ 40mm
11⁄2″ 50mm
2″ 63mm
3″ 90mm
4″ 110mm
6″ 160mm
8″ 225mm
10″ 250mm
12″ 315mm
1″ 32mm
H⁄2
L2
H
H⁄2 max
L2
Example:Calculate the size of expansion loop required for a 90mm diameter pipe expanding 60mm andcontracting 30mm:Based on the worst case ie. 60mm expansion, �L = 30mm
2
Draw a horizontal line from the vertical section to meet the 90mm pipe gradient line. Drop a perpendicular from the intersection point to the horizontal scale. The figure obtained isthe free leg length of the loop required.Hence, in this instance a loop measuring 1400mm long x 700mm wide will cater for ±30mmmovement i.e. the loop will cater for both the expansion and contraction of the pipe.
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945058
Expansion bellowsAxial expansion bellows may also be used in place of utilising thenatural flexibility of the ABS. These must be of a suitable design toensure correct operation with ABS pipework. Contact our TechnicalSupport Department for further information.
Pipe anchorsThe direction of pipe movement can be controlled by the use ofanchor points at strategic positions. There are a number of methodsof securely anchoring plastic pipes, some of which are detailedbelow. However it should be noted that tight fitting pipe supportsshould not be used since damage to the pipe could occur.
Construction of Typical Anchor Points
1. Small Bore (up to 4" Pipework)
2. Larger pipe (above 4" Pipework)
Design of pipe supports and guidesUnless it is considered that minimal pipe movement will occur,pipe supports should be designed to provide lateral restraint andallow free, unrestricted, axial pipe movement. Standard ‘drop rods’may not provide sufficient lateral restraint and the ABS pipe couldstart to ‘snake’. Durapipe Cobra clips are designed to meet these requirements. A suitable alternative would be mild steel saddle clips designedwith a clearance between the pipe and the clip. All steel bracketsin contact with the plastic pipe should be free of sharp edges toavoid damaging the pipe.
Support centresThe recommended distance between supports for ABS pipes filledwith water is given in the table below. This table is based on thethinnest wall pipe in each size. For sizes 1", 11/4", 11/2", 2", 3" and4" the support distance can be increased by 10% for class E pipes.Where the contents have a specific gravity greater than 1, thedistance must be decreased by dividing the recommended centredistances by the specific gravity. The details shown are forhorizontal pipes. For vertical pipes, support centres may beincreased by 50%.
Pipe trays are available for sizes 16mm, 20mm and 32mm (see page 53). These allow support distances to be increased to 2.0 metres
Size Support Support Supportmm/imperial Distance (m) Distance (m) Distance (m)
at 20°C at 50°C at 70°C16mm / 3⁄8" 0.8 0.5 0.420mm / 1⁄2" 0.9 0.6 0.525mm / 3⁄4" 1.0 0.7 0.632mm / 1" 1.1 0.8 0.740mm / 11⁄4" 1.2 0.9 0.750mm / 11⁄2" 1.3 1.0 0.763mm / 2" 1.4 1.1 0.875mm / 21⁄2" 1.5 1.2 0.890mm / 3" 1.6 1.2 0.9
110mm / 4" 1.8 1.3 1.0125mm 1.9 1.4 1.0140mm / 5" 2.0 1.5 1.1160mm / 6" 2.1 1.6 1.2200mm 2.2 1.7 1.3225mm / 8" 2.3 1.8 1.5250mm 2.5 2.0 1.7280mm / 10" 2.7 2.2 1.9315mm / 12" 2.9 2.4 2.1
email: [email protected] web: www.durapipe.co.uk 59
Additional Important Information
Support of heavy equipmentLarge valves, strainers and other heavy equipment should alwaysbe independently supported to prevent undue loading onto the ABSsystem. Durapipe valve support plates have been designed for thispurpose and may be used in place of flange backing rings.
Pipe contents identificationDo not put self-adhesive labels directly on to pipe surfaces as thismay cause stress cracking. It is recommended that some sort ofbarrier, such as aluminium foil, is placed between pipe andidentification label.
Threaded ConnectionsA range of threaded fittings is available. If it is required to cut athread on to Durapipe ABS pipe, use a sharp die especiallyreserved for plastic pipes and cut full thread depth withoutlubricant, in one operation.This should only be attempted on pipe sizes up to 2" n.b. Class Tpipe must be used. Pipes from Durapipe ABS metric range are notsuitable for threading.Assembly should be carried out by hand and final tightening by astrap wrench, if necessary.Extra care must be taken not to overtighten or damage the thread.Pipe wrenches must not be used.It is recommended that PTFE tape be used when making threadedjoints/connections. Any other sealing compound must be confirmed by Durapipe asbeing suitable.‘Boss White’ and anaerobic adhesive sealants, such as Loctite 542and 572, can chemically attack ABS and must not be used.
Warning:• Thermal Insulation and Trace Heating
Whilst Durapipe ABS piping systems have low thermalconductivity, situations may arise when trace heating and/orthermal insulation will be required.Some insulation products can contain substances capable ofhaving a detrimental effect on thermoplastic pipework. It isrecommended therefore that suitability be checked with Durapipeprior to use. Recommended insulation - A list of some of the common types ofinsulation materials known to be suitable with ABS pipework areas follows;Fibre wool, such as ‘Rockwool’Armaflex Class 1 HTPhenolic foamPolystyreneNote - the above list is not exclusive – please contact ourTechnical Support Department if further assistance is required.
Certain foam rubbers and adhesives used in conjunction withfoam rubber insulation may be detrimental. We do not, therefore,recommend that insulation be bonded to the pipework.Adhesives should only be used to bond adjacent edges together.Thermoplastic pipework can be damaged by plasticisers used inthe outer coverings on some heating tapes. Tapes sheathed inplasticised PVC must be avoided, unless specifically approved byus. (This comment also applies to any tapes, adhesives, or othersubstances used to secure the heating tape to the pipework.)Recommended heating tapes - The selection of heating tapeswith silicone rubber, woven wire, or woven polyester outersheaths will eliminate the risk of plasticiser migration. Thesetapes are therefore preferred for use on thermoplastic systems.
• Intumescent Mastic and Mastic SealantsCertain mastic sealants are formulated with phthalates.Phthalates are known to be extremely aggressive toward ABSmaterials, and therefore confirmation of the suitability of anymastic sealant should be determined before being used inconjunction with ABS pipework.
• Pipe ClipsIt is important that the composition of pipe clips and their liningsdo not include substances which might have a detrimental effectupon the ABS pipe. Please check for suitability before use.
We strongly recommend the use of Durapipe Cobra clips for pipesizes up to and including 160mm OD / 6”NB, wherevercircumstances allow.
• Contact with synthetic oilsSome synthetic oils are unsuitable for use with thermoplasticpipe systems. The main types of synthetic oils identified as beingincompatible with thermoplastic pipe systems includes Esters,Polyalkylene Glycols, and Organic Phosphates.
It should be noted that some metal coil manufacturers utilisethese oils in their manufacturing process and that some residuecan remain within the coil after production.
• Freezing conditionsPrecautions should be taken to prevent contents freezing, as thiscan cause pipework to split.
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945060
Durapipe ABS Jointing Guide (up to 8"/225mm)
Durapipe ABS pipes and fittings are designed for an interferencefit. Although Durapipe ABS solvent cement has good gap fillingproperties no attempt should be made to increase the clearancebetween the pipes and fittings.
Solvent cement welding offers a simple and quick means ofconstructing high integrity, leak-free joints.
The solvent cement operates by chemically softening the jointsurfaces. Joint integrity will be greatly reduced if these surfaces arenot clean and properly prepared.
Durapipe ABS solvent cement must be used. The jointing procedure detailed below must be followed.
This relates to the new “one-step” solvent cement. With thiscement it is not necessary to abrade pipe or fitting.
Procedure1. The pipe must be cut clean and square. A suitable wheel cutter
will eliminate swarf. As an alternative (and on larger sizes) acarpenters saw should be used, however this may create dustand swarf which can enter the system.
2. Chamfer the end of the pipe using a coarse file or suitablechamfering tool. The chamfer should be approximately 45° by3mm to 5mm depending on the pipe size.
3. Mark the pipe a known distance from the end and clear of thearea to be cleaned. This mark should be used to confirm fullinsertion of pipe into socket of fitting.
4. Ensure joint surfaces are clean and free from moisture. Clean surfaces thoroughly with Durapipe Eco-cleaner using lintfree cloth/paper towel.
5. Stir or shake the Durapipe cement thoroughly before use.
6. Using a clean brush (0.5/1 litre tins) or integral applicator (125ml container), apply cement to the pipe and fitting. The joint surfaces should be completely covered by cement.
The use of the integral applicator should be limited to pipe sizesup to and including 1/ 32mm. For larger pipe sizes, cementshould be applied using an appropriate size brush and tin ofcement. It is important to apply cement quickly to enableassembly without excessive force being required.When applying cement with brush, the size of the brush shouldbe approximately half the size of the pipe to be jointed - brushsize up to 21/2" (63mm) for 0.5 litre and up to 3" (75mm) for 1 litre tins.
7. Immediately after applications of cement, push pipe fully homeinto the fitting. Do not twist. Hold the pipe and the fitting fortimes varying from a few seconds on sizes 3/8” or 16mm up to1 minute on sizes 8” or 225mm and above. The slight tapermoulded into the fitting may otherwise cause it to slide off thepipe with consequent loss of joint strength. Application of thecorrect amount of cement will result in a neat bead of cementat the edge of the fitting and at the edge of the pipe. Excessivedeposits inside the fittings must be avoided as these canweaken the wall, particularly on smaller sizes. When working under cold conditions make sure the joints arefree from frost and moisture.
8. Wipe off excess cement from the outside of the joint.
9. Using the mark previously made, check that the pipe has beenfully inserted.
10. Do not disturb the joint for at least 10 minutes after assembly.Allow sufficient drying time prior to pressurisation of the system(see page 65).
11. Replace lids on containers.
12. Clean brush(es).
email: [email protected] web: www.durapipe.co.uk 61
CAUTION• DO NOT joint in the rain or wet conditions• DO NOT use dirty brushes• DO NOT use dirty or oily cleaning cloths• DO NOT use the same brushes for different cements• DO NOT dilute or decant Durapipe ABS solvent cement• Follow safety instructions on Durapipe solvent cement
and Eco-cleaner containers
3. File a lead chamfer (5-10mm x 45°) on the end of the pipe.This prevents cement being scraped from the surface of thefitting during joint assembly.
4. Measure the socket depth of the fitting to be cemented.
5. Using a pencil, mark the end of the pipe at a distance equal tothe fitting socket depth plus 25mm. This enables a visual checkto be made that the pipe is fully inserted into the fitting.
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945062
Durapipe ABS Jointing Guide (for 10"/250mm and 12"/315mm)
The skill required to make perfect solvent cement welded jointsincreases in proportion to pipework diameter. The larger thediameter of the pipework, the more skill is required to ensure asuccessful joint.
Installing large bore product successfully requires a minimum oftwo people due to increased difficulty in manipulating the product.
Durapipe one-step solvent cement must be used. This isthixotropic, allowing a thick layer to be applied to pipe and fittings.
Equipment required• Sharp wood saw or suitable cutting tool• Tape measure and pencil• Lint free cloth/industrial paper towel• Two 75mm brushes• Coarse file• Durapipe Eco-cleaner•1 litre tin(s) of Durapipe ABS one-step Thixotropic Solvent
Cement
Read the instructions for use and labels on ABS solvent cement and Eco-cleaner. Always follow all safetyinstructions - they are for your protection.
Procedure1. Measure and cut pipe to length ensuring that the
ends are cut square.
2. De-burr and remove any remaining swarf.
Note: Abrading pipe and fittings is not required when using Durapipe one-step solvent cement
6. Offer the socket fitting to the end of the pipe to obtain a feel forthe clearance gap between pipe and fitting. Do not fully insertat this stage. Pipe should comfortably enter the socket between1/4 and 1/3 of socket depth.
7. Clean all of the surfaces thoroughly, using a clean paper towelor lint-free cloth soaked with Durapipe Eco-cleaner. Oncecompleted, prepared surfaces should have a uniform, shinyappearance.
8. Remove the lid of the Durapipe ABS solvent cement and stir thecement thoroughly.
9. Two people, each using a clean 75mm brush should then worksimultaneously in order to apply liberal coatings of DurapipeABS solvent cement to the prepared surfaces of both pipe andfitting.
Use longitudinal brush strokes to achieve uniform application ofcement. Work quickly to apply liberal coatings to both surfaces.
10. Immediately after application of the cement, and with thecement still liquid on both surfaces, push the pipe fully homeinto the socket of the fitting. Take care not to twist either thepipe or the fitting when pushing them home.
email: [email protected] web: www.durapipe.co.uk 63
11. Note: The fitting may try to slide off the pipe. In order toensure that this does not happen you should hold in place forapproximately two minutes.
12. Any excess cement should then be wiped off the joint using aclean paper towel. Replace lids of solvent cement and DurapipeEco-cleaner when not in use in order to avoid evaporation andspillage. When not in use, brushes should stand in Durapipe Eco-cleaner. When joints have been completed the brushesshould be cleaned thoroughly using Durapipe Eco-cleaner.
13. Using the pencil mark previously made on the pipe (see Step 5) ensure that the pipe is fully inserted into thesocket.
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945064
CAUTION• DO NOT joint in the rain or wet conditions• DO NOT use dirty brushes• DO NOT use dirty or oily cleaning cloths• DO NOT use the same brushes for different cements• DO NOT dilute or decant Durapipe ABS solvent cement• Follow safety instructions on Durapipe solvent cement
and Eco-cleaner containers
The completed joint should not be handled or subjectedto stresses for a period of 4 hours from assembly.Allow a minimum joint curing period of at least 48 hoursat 20°C prior to pressurisation. Please note that curingtimes need to be extended when working in colderconditions.
email: [email protected] web: www.durapipe.co.uk 65
Notes1. The integrity of Durapipe ABS systems may be affected if
Durapipe ABS Thixotropic solvent cement is not used.
Durapipe UK disclaims responsibility for any Durapipe ABSsystem constructed with any other cement or not fabricated inaccordance with the instructions herein.
2. Use the appropriate size of solvent cement tin/container andmethod of application for the size of pipe and fitting to beassembled.
3. To achieve the correct speed of application on sizes 5"/140mmand above, cement should be applied simultaneously to pipeand fitting, by two people.
An indication of the number of joints to be made per litre ofcement is as follows:
Drying TimesThe drying times will vary with fit, amount of solvent cementapplied, ambient temperature and working pressure. It isrecommended that, wherever possible, joints of sizes up to8"/225mm are allowed to dry for at least 24 hours. Sizes 10" and12"/250 mm and 315mm require a minimum of 48 hours. These guidelines are based on an ambient temperature of between10°C to 40°C. Longer drying times will be required at lowerambient temperatures.
It is recognised that there will be occasions when the system willneed to be put into service within a few hours of being made. A rough but safe working guide where the ambient temperature isbetween 10°C to 40°C and the contents temperature does notexceed 20°C is as follows:
Durapipe ABS Solvent Cement and Eco-Cleaner
• Two step application for pressure systems Using Durapipe solvent cement it is no longer necessary toabrade the pipe or fitting.
• One step application for ‘non-pressure’ systemsFor ’non-pressure’ applications it is not necessary to abrade orclean joint surfaces, providing they are clean and free fromcontamination.
• More environmentally friendlyVOC content less than the previous cement - small diameterneck to 125ml container reduces emissions.
• Better gap-filling propertiesUsing the new Durapipe cement it is only necessary to apply twoliberal coats to ‘large bore’ assemblies (10"/250mm and12"/315mm), one to pipe and one to fitting.
• More viscousLess prone to running - particularly noticeable on large boreassemblies - less wastage.
• Improved packagingNew 125ml container for use on sizes up to 1"/32mm pipeworkincorporates integral applicator - no need for additional brushesto apply - less waste.
• Quicker drying times for small diameter systems.
• More environmentally friendly Eco-cleanerWhen tested in accordance with South Coast Air QualityManagement District (SCAQMD) Rule 1168, cleaner classed aslow VOC.
Size Recommended Joints per litremm inch container size ABS
16 - 32 3/8 - 1 125 ml. 40040 - 63 11/4 - 2 0.5 Litre 20075 - 110 21/2 - 4 0.5 Litre 70
125 - 140 5 1 Litre 20160 - 225 6 - 8 1 Litre 10250 - 315 10 - 12 1 Litre 5
Size Range Up to 21/2" 3" to 4" 5" & 6" 8" 10" & 12"75mm 90mm to 125mm 140mm & 160mm 200mm & 225mm 250mm & 315mm
Drying Time 0.5 hour / bar 1.0 hour / bar 1.5 hours / bar 2.0 hours / bar 48 hours minimum
Note - minimum drying period should never be less than 1 hour.
PrecautionsSolvent cement and cleaners are hazardous, flammable materials.Please refer to the safety Data Sheet for Durapipe ABS SolventCement and Cleaner, for details on safety requirements.Do not use near naked flames and avoid smoking in the workingarea – Durapipe ABS solvent cement is highly flammable.Do not use cements or cleaners in confined spaces. Concentrated vapours may cause dizziness.Use a shelter to keep jointing surfaces dry in wet weather.
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945066
Branch ConnectionsReduced branch connections can be made as follows:
Imperial range:Bushed equal tees or Y pieces, solvent cemented saddles.
Metric range:Bushed equal tees or Y pieces, reduced branch tees.
Saddles permit branch connections to be made with the main pipein situ. The following procedure must be followed carefully:
1. Drill hole in pipe wall to suit the connection. The size of holeand cutter to be used for each size of saddle is indicated below:
Pipe size Hole diameter Cutter size(Imperial) (mm) (Imperial)
2 48 17/8
3 61 23/8
4 74 27/8
6 74 27/8
2. Mark out the area covered by the saddle on the pipe.
3. Clean surfaces with Eco-cleaner.
4. Feed on to pipe two worm drive (Jubilee) clips which willclamp the saddle during fitting. These should be placed eitherside of the socket on the saddles. Apply cement to pipe areaand saddle. It is important to apply cement quickly.
5. Position saddle immediately, ensuring that spigot locates in hole in pipe wall. Clamp in place using worm drive clipswithout delay.
6. Wipe off any excess cement.
7. Replace lids on containers. 8. Clean brush with Eco-cleaner.
Important:1. See page 65 for details of drying times. Allow 24 hours before
removing straps.2. On no account should a branch tee be constructed by drilling
through the wall of a pipe and/or fitting and attempting tosolvent weld a smaller fitting into the hole.
email: [email protected] web: www.durapipe.co.uk 67
The Use of Bushes, Reducers and Threaded Adaptors
Reducing bushes Reducing bushes offer a neat and simple method of reducing socketsize in the minimum of space.Care must be taken to properly prepare all jointing surfaces asrecommended earlier, with the end of the bush being chamfered(unless a moulded chamfer is included).
Example in the use of reducing bushes
The use of reducersAll fittings have female ends, dimensionally controlled for coldfusion jointing. In addition, reducing sockets in the Metric serieshave controlled outside diameter at the larger end. This allows useas a male or female component, as illustrated.
Metric series threaded adaptorsFemale and male threaded adaptors have controlled inside andoutside diameters on the plain end. They can therefore be used asa male or female component.
Connections - Plastics to metal There are several recommended methods to connect metal andplastic systems:Composite unionsFlangesMale threaded fittingsFemale threaded fittings
Plastics expand or contract far more than metals for any givenchange in temperature. The practice of connecting plastic threadedfittings to metal threads is not recommended where the joint islikely to experience a temperature change of more than +5ºC,otherwise leaks may occur.Composite unions are available with brass male or female BSP threaded adaptors.
Connection to instrumentationInstrumentation connections can be made by drilling through pipeand socket where the material is at its thickest and tapping thehole to receive a threaded fitting, as shown below:
Pipe size Connection size16mm-63mm/3⁄8" -2" Use tees, reducing bushes and
threaded fittings75mm-110mm/21⁄2" -4" Max. tapping 1⁄2" BSP.125mm-140mm/5" Max. tapping 3⁄4" BSP.160mm & above/6" & above Max. tapping 1" BSP.
Such connections, if correctly drilled and tapped with full threadform will be limited to Class C /PN10 pressures.
Flanged JointsFull face flanges are available from 1/2" to 6".Stub flanges are available from 2" to 12" and in metric sizes from16mm to 315mm and provide a convenient means of convertingfrom Imperial to Metric systems in sizes 8"/200mm and above.The correct galvanised mild steel backing ring and rubber gasketmust be used with both types.
Flange Bolting ProcedureThe following procedure is recommended for installing DurapipeABS flanges:1. Inspect flange faces and ensure that they are clean and
undamaged.2. Check that the correct backing ring and rubber gaskets have
been supplied. Durapipe supplies a matched system of flangesand backing rings - do not interchange Metric and Imperialcomponents.
3. Loosely assemble flanges. Ensure that flanges and bolt holesalign and that the flange faces are parallel. Ensure that thegasket is correctly positioned between the flanges.
4. Ensure that the appropriate sized washer are placed under bothbolt heads and nuts.
5. Tighten the nuts and bolts in a diagonally opposite sequence(see below) to ensure even loading around the flange to avoiddistortion. It is recommended that the nuts and bolts betightened as uniformly as possible progressively from a fingertight start.
6. Repeat as necessary until tightness of all bolts is achieved.
Instrument connection
1
2
3 4
5
67
8
1
2
3 4
5
6
7
8
11
912
10
1
2
3 4
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945068
General Information
ApprovalsImperial SeriesBritish Standards KitemarkWRAS (cold water only)Department of EnvironmentM & E Standard of SpecificationDepartment of Health – renal dialysis applications
Metric SeriesLloyds Register of Shipping – UKDet Norske Veritas – Norway Bureau Veritas – FranceGermanischer Lloyd – GermanyAmerican Bureau of Shipping – USAHygiene Approval – GermanyHygiene Approval – PolandPenang Water Authority
Further details on the products and applications covered by eachof the above approvals is available on request.
Durapipe ABS Imperial series pipe is covered by KitemarkLicence No. KM07961 to BS 5391:Part 1 1976.
Durapipe ABS Imperial series fittings are covered by KitemarkLicence No. KM07962 to BS 5392:Part 1 1976.
Durapipe ABS Imperial series pipe and fittings are UK WaterRegulations Advisory Scheme approved for cold water services.
Durapipe ABS Metric series pipe and fittings are UK WaterRegulations Advisory Scheme approved for cold water services.
Durapipe ABS solvent cement is UK Water Regulations AdvisoryScheme approved.
Durapipe Metric pipework is approved for various non-essentialservices on board ships by:Lloyds Register of ShippingDet Norske VeritasBureau VeritasAmerican Bureau of ShippingGermanischer Lloyd
Auto CAD drawingsTwo dimensional drawings of products contained in this brochureare available on our website www.durapipe.co.uk Available in Fast track format.
Health and Safety at Work Act and COSHH RegulationsAttention is drawn to the requirements in the UK of this Act and to the1988 Control of Substances Hazardous to Health (COSHH) Regulations.Notes on care to be taken in handling and storage of Durapipe productsare available in leaflet D0004. Durapipe cannot accept responsibility foraccidents arising from the misuse of its products because of badinstallation or incorrect application.
Material safety dataMaterial Safety Data sheets are available on our website.
Handling ABS pipes and fittingsAlways adopt good storage and handling practice. Advice is available upon request.
Jointing and installationDurapipe ABS solvent cement must be used exclusively for fabrication ofthe ABS system. Performance guarantees are null and void if other solventcements are used.
Storage and installation outdoorsCare should be taken to avoid exposure to sunlight. This will causediscoloration and embrittlement of the ABS material. Whilst this is asurface effect only, it is recommended that precautions be taken to preventthis happening (Other sources of UV light can have a similar effect).ABS products should be stored indoors, under a shelter, or covered with atarpaulin. It is acceptable to install ABS outdoors. Painting of any un-insulated pipework installed in a sunny location will be sufficient toprotect the ABS material from the effects of sunlight.
Thermal Insulation and Trace HeatingPlastics/SealantsPipe ClipsContact with synthetic oilsFreezing conditionssee page 59 for the above
Filling and FlushingWhen purchasing chemicals for either flushing or long-term system use,suppliers should be advised that this is for ABS material. Guidance on thesuitability of various system flushing or filling fluids with ABS can be foundin the Durapipe Chemical Data catalogue.
TestingIt is suggested that the following test procedure be followed, after jointshave been allowed to dry for the appropriate minimum time (at least 24hours up to 8"/225mm, sizes 10"/250mm and 12"/315mm require aminimum of 48 hours at 20°C).The system should be divided conveniently into test sections.Fill section with cold water making sure that no air pockets remain. Do not pressurise at this stage.Check system for leaks. If none are apparent, check for and remove anyremaining air. Increase pressure up to 3bar. Do not pressurise further atthis stage.Leave section pressurised for 10 minutes. If pressure decays, inspect forleaks and rectify as necessary. If pressure remains constant, slowlyincrease the hydrostatic pressure to 11/2 times nominal operating pressure.Leave section pressurised for a period not exceeding 1 hour. During thistime pressure should not change.
CautionPersonnel must stand well clear when pressure testing systems. Similarly,under no circumstances should pressure tests be carried out usingpressurised gases. Such a test could be extremely dangerous and serves nouseful purpose.Note: If extended times are required to achieve hydrostatic pressure, eitherleakage has occurred or air remains in the line. Inspect for leakage and ifnone is apparent, reduce pressure and check for trapped air. This must beremoved before further pressurisation commences.
Pipe contents identificationDo not put self- adhesive labels directly onto pipe surface as thiscan cause stress cracking. It is recommended that some sort ofbarrier such as aluminium foil, is placed between the pipe andidentification label.
email: [email protected] web: www.durapipe.co.uk 69
Product SpecificationIMPERIAL
DURAPIPE ABS PIPESIn accordance with the dimensional and testing requirements of BS 5391 Part 11976, Third Party Approved with British Standard Kitemark Licence (whereapplicable).
DURAPIPE ABS FITTINGSIn accordance with the dimensional and testing requirements of BS 5392 Part 11976, Third Party Approved with British Standard Kitemark Licence (whereapplicable).
MATCHED SYSTEMThe ABS products (see below) shall be from a single manufacturer to ensurecomplete integrity, quality and compatibility between pipes, fittings and valves.Manufacturers warranties may be compromised if a system is installed withmaterials from various manufacturers. Where this is not possible then anyalternative products should be confirmed as being at least equivalent to that whichis normally supplied.
QUALITY SYSTEMPipes, fittings and valves shall be manufactured in an environment, which operatesa Quality Assurance System assessed to ISO 9001.
ENVIRONMENTAL SYSTEMThe manufacturer of pipes, fittings and valves shall be able to demonstratecompliance with applicable environmental legislation and products shall bemanufactured in an environment where documented performance reviews areundertaken and an Environmental Management System is successfully assessed toISO 14001.The manufacturer shall offer ABS solvent cements and cleaners, specially formulated to minimise any adverse effects on the environment during installation of the ABS system.
THIRD PARTY APPROVALSThe manufacturer shall have the following Third Party Approvals:
British Standard Kitemark LicenceKM07961 for Durapipe Inch pipes to BS 5391: Part 1 1976KM07962 for Durapipe Inch fittings to BS 5392: Part 1 1976
WRAS Water Regulations Advisory Scheme0106052 for Durapipe Inch pipes & fittings (1100)0009516 for Durapipe solvent cement (5560)0205509 for Durapipe thixotropic solvent cement (5560)
Department of the EnvironmentM & E 100 Standard Specification for Air Conditioning
Department of Health and Social SecurityRenal Dialysis Applications
COLOUR/MATERIAL/ FOOD CONTACT APPROVALColoured mid-grey, all ABS materials shall conform to the toxicological requirementsof the British Plastics Federation/British Industrial Biological Research AssociationCode of Practise for Food Usage 45/5, the EC requirements for plastics materials incontact with food stuffs, and the requirements of the World Health Organisation forpotable water transportation.
DRINKING WATER/ APPROVAL FOR USE IN CONTACTABS pipework up to property boundaries shall be approved by the Department ofthe Environment and the Welsh Office according to Regulation 25 & 26 of the ‘List of Substances, Products and Processes Approved for use in Connection with theSupply of Water for Drinking, Washing, Cooking or Food Production Purposes’ asissued by the Drinking Water Inspectorate (1992).Additionally, within private property boundaries all ABS pipes, fittings and solventcement shall be listed in the Water Fittings and Materials Directory to showcompliance with the requirements of the United Kingdom Water RegulationsAdvisory Service.In any situation which could result in the ABS pipes, fittings and solvent cementcoming into contact with water which is intended for human consumption theseshall be in accordance with the requirements of BS 6920 Part 1.Copies of certification of compliance with these approvals must be available forinspection.
DESIGN LIFEPipes, fittings and valves shall be designed to operate continuously for 50 years attheir maximum rated pressure at a working temperature of 20°C.Process Control Testing must be carried out during manufacture and documented oneach and every production batch.Fittings and Pipes will be subjected to a pressure test of 3.2 x maximumrecommended working pressure for 1 hour at 20°C during 1st and 2nd hours ofproduction, then every 6 hours for fittings, and 8 hours for pipes.Pipes are in addition to be impact tested after conditioning at 0°C for 1 hour.Fittings are in addition to be subject to stress relief testing at 150°C.Pipes and fittings shall undergo dimensional, marking and visual inspection at thefrequency outlined above.
CHEMICAL SUITABILITY The manufacturer shall publish detailed chemical resistance data to enable thesuitability of the ABS material, seals and gaskets to be determined by designers andspecifiers. The manufacturer shall also employ a qualified and experienced chemist and provide a free-of-charge service advisory service for assessing the suitability of itsABS material, seals and gaskets.
DESIGN & INSTALLATION SPECIFICATIONThe installation must be carried out by competent persons. The contractor shall be required to provide technical documentation relating to themanufacturers recommended Design and Installation procedures.The manufacturer shall publish Design and Installation recommendations, and shallalso provide a free-of-charge training service for designers and installers, withappropriate written confirmation of attendance.
DURAPIPE ABS BALL VALVESTrue union design, end load resistant with full pressure and shock resistant anti blowout device which conforms to design and endurance testing requirements of BS 5392 Part 1 1976, and DIN 3230 Part 3 Leak Rate One (Water and Air). The following testing will have been successfully conducted:Drop Tight and Bubble Tight test.Hydrostatic Shell Test 1.5 x Maximum Working Pressure.Seat Test 1.1 x Maximum Working Pressure.
PRESSURE RATINGUp to size 2" - PN15 (Class E) at 20°C21/2" to 4" - PN10 at 20°C
SEATS AND SEALSSeats: PTFE material fitted with O ring compensators. Seals: Standard size O ring type for ease of replacement. Available in EPDM or FPM materials.
END CONNECTIONSPlain socket ends, or BSP threaded.
ACTUATIONOptions: Electric or pneumatic.
DURAPIPE ABS MULTIPORT BALL VALVESTrue union design. Options of ‘L’, ‘T’, or ‘C’ port configuration.
The following testing will have been successfully completed:
Drop Tight and Bubble Tight Test.Hydrostatic Shell Test 1.5 x maximum recommended pressure.Seat Test 1.1 x maximum working pressure.
PRESSURE RATING3/8" to 2" - PN 10 at 20°C.
SEATS AND SEALSSeats: PTFE material. Seals: O ring type for ease of replacement. Available in FPM material.
END CONNECTIONSPlain socket ends or BSP threaded.
DURAPIPE ABS DIAPHRAGM VALVESEquipped with a maintenance free hand wheel actuator with spindle extension toindicate the position of the valve open or closed. The body retaining bolts are fixedfrom the underside, to provide a crevice free outer surface to prevent accumulationof debris or risk of corrosion of exposed steel bolts from chemical spillage.
Valves will have been hydrostatically pressure tested to the requirements of BS 5392 Part 1 1976, BS 5156, ISO 7508 and DIN 3230 Part 3 Leak Rate One
PRESSURE RATING1/2" to 4" – PN10 at 20°C
DIAGPHRAGM TYPEChoice of EPDM, FPM or PTFE will be available.
END CONNECTIONThese may be plain spigot ends or flanged.
ACTUATIONOptions – Pneumatic
DURAPIPE ABS BALL CHECK VALVESThese shall be single union with plain socket or BSP threaded end.
PRESSURE RATING3/8" to 3" – PN10 at 20°C.
SEALSAvailable in either EPDM or FPM.
DURAPIPE ABS BUTTERFLY VALVESReinforced Polypropylene body, fully lined, with ABS disc.Full flanged design, with oval holes/inserts to suit various standard flange drillings.Lever operated, with 10 x 10° position stops, and locking device.
PRESSURE RATING11/2" to 10" – PN10 at 20°C12" - PN8 at 20°C
PRIMARY LINERAvailable in EPDM, FPM, or NBR
ACTUATIONElectric, Pneumatic, or Gearbox (standard on sizes over 8")
Tel: +44 (0)1543 279909 Fax: +44 (0)1543 27945070
METRIC
DURAPIPE ABS PIPESIn accordance with the dimensional and testing requirements of DIN 8062, KIWA 49, ISO 161/1, and ISO DIS 15493 (where applicable). Pressure rating PN10 at 20°C up to 250 mm. PN8 at 20°C for 315 mm.
DURAPIPE ABS FITTINGSIn accordance with the dimensional and testing requirements of DIN 8063, KIWA 549, ISO 727 and ISO DIS 15493 (where applicable). Pressure rating PN10 at 20°C up to 250 mm. PN8 at 20°C for 315 mm.
MATCHED SYSTEMThe ABS products shall be from a single manufacturer to ensure complete integrity,quality and compatibility between pipes, fittings and valves. Manufacturerswarranties may be compromised if a system is installed with materials from variousmanufacturers. Where this is not possible then any alternative products should beconfirmed as being at least equivalent to that which is normally supplied.
QUALITY SYSTEMPipes, fittings and valves shall be manufactured in an environment which operatesa Quality Assurance System assessed to ISO 9001.
ENVIRONMENTAL SYSTEMThe manufacturer of pipes, fittings, and valves shall be able to demonstratecompliance with applicable environmental legislation and products shall bemanufactured in an environment where documented performance reviews areundertaken and an Environmental Management System is successfully assessed toISO 14001.The manufacturer shall offer ABS solvent cements and cleaners, specially formulated to minimise any adverse effects on the environment during installation of the ABS system.
THIRD PARTY APPROVALSThe manufacturer shall have the following Third Party Approvals:
WRAS Water Regulations Advisory Scheme0012099 for Durapipe Metric pipes and fittings0009516 for Durapipe solvent cement (5560)0205509 for Durapipe thixotropic cement (5560)
DEPARTMENT OF HEALTH AND SOCIAL SECURITYRenal Dialysis Applications
DET NORSKE VERITAS
BUREAU VERITAS
COLOUR/MATERIAL/FOOD CONTACT APPROVALColoured mid-grey all ABS materials shall conform to the toxicological requirementsof the British Plastics Federation/British Industrial Biological Research AssociationCode of Practise for Food Usage 45/5, and the EC requirements for plasticsmaterials in contact with food stuffs. ABS fittings shall comply with ISO 727 andthe requirements of the World Health Organisation for potable water transportation.
APPROVAL FOR USE IN CONTACT WITH DRINKING WATERABS pipework up to property boundaries shall be approved by the Department ofthe Environment and the Welsh Office according to Regulation 25 & 26 of the ‘List of Substances, Products and Processes Approved for use in Connection with theSupply of Water for Drinking, Washing, Cooking or Food Production Purposes’ asissued by the Drinking Water Inspectorate (1992).Additionally, within private property boundaries all ABS pipes, fittings and solventcement shall be listed in the Water Fittings and Materials Directory to showcompliance with the requirements of the United Kingdom Water RegulationsAdvisory Service.In any situation which could result in the ABS pipes, fittings and solvent cementcoming into contact with water which is intended for human consumption theseshall be in accordance with the requirements of BS 6920 Part 1.Copies of certification of compliance with these approvals must be available forinspection.
DESIGN LIFEPipes, fittings and valves shall be designed to operate continuously for 50 years attheir maximum rated pressure at a working temperature of 20°C.Process Control Testing must be carried out during manufacture and documented oneach and every production batch.Fittings and Pipes will be subjected to a pressure test of 3.2 x maximumrecommended working pressure for 1 hour at 20°C during 1st and 2nd hours ofproduction, then every 6 hours for fittings and 8 hours for pipes.Pipes are in addition to be impact tested after conditioning at 0°C for 1 hour.Fittings are in addition to be subject to stress relief testing at 150°C.Pipes and fittings shall undergo dimensional, marking, and visual inspection at thefrequency outlined above.
CHEMICAL SUITABILITYThe manufacturer shall publish detailed chemical resistance data to enable thesuitability of the ABS material, seals, and gaskets to be determined by designers andspecifiers.The manufacturer shall also employ a qualified and experienced Chemist andprovide a free-of-charge advisory service for assessing the suitability of its ABS material, seals, and gaskets.
DESIGN & INSTALLATION SPECIFICATIONThe installation must be carried out by competent persons. The contractor shall be required to provide technical documentation relating to themanufacturers recommended Design and Installation procedures. The manufacturer shall publish Design and Installation recommendations, and shallalso provide a free-of-charge training service for designers and installers, withappropriate written confirmation of attendance
DURAPIPE ABS BALL VALVESTrue union design, end load resistant with full pressure and shock resistant anti blowout device which conforms to design and endurance testing requirements of BS 5392 Part 1 1976, and DIN 3230 Part 3 Leak Rate One (Water and Air).
The following testing will have been successfully completed:
Drop Tight and Bubble Tight test.Hydrostatic Shell Test 1.5 x maximum working pressureSeat Test 1.1 x maximum working pressure.
PRESSURE RATING16mm to 63mm – PN 16 at 20°C75mm to 110mm – PN 10 at 20°C
SEATS AND SEALSSeats: PTFE material fitted with O ring compensators. Seals: Standard size O ring type for ease of replacement. Available in EPDM or FPM materials.
END CONNECTIONSPlain socket ends or BSP threaded.
ACTUATIONOptions: Electric or Pneumatic.
DURAPIPE ABS MULTIPORT BALL VALVESTrue union design. Options of ‘L’, ‘T’, or ‘C’ port configuration
The following testing will have been successfully completed:
Drop Tight and Bubble Tight Test.Hydrostatic Shell Test 1.5 x maximum working pressure.Seat test 1.1 x maximum working pressure.
PRESSURE RATING16mm to 63mm - PN10 at 20°C
SEATS AND SEALSSeats: PTFE material. Seals: O ring type for ease of replacement. Available in FPM material.
END CONNECTIONSPlain socket ends or BSP threaded
DURAPIPE ABS DIAPHRAGM VALVESEquipped with a maintenance free hand wheel actuator with spindle extension toindicate the position of the valve open or closed. The body retaining bolts are fixedfrom the underside, to provide a crevice free outer surface to prevent accumulationof debris or risk of corrosion of exposed steel bolts from chemical spillage.
Valves will have been hydrostatically pressure tested to the requirements of BS 5392 Part 1 1976, BS 5156, ISO 7508 and DIN 3230 Part 3 Leak Rate One.
PRESSURE RATING20mm to 110mm – PN10 at 20°C
DIAPHRAGM TYPEChoice of EPDM, FPM or PTFE will be available.
END CONNECTIONThese may be plain spigot ends or flanged.
ACTUATIONOptions: Pneumatic
DURAPIPE ABS BALL CHECK VALVESThese shall be single union with plain socket or BSP threaded end.
PRESSURE RATING20mm to 110mm – PN10 at 20°C.
SEALSAvailable in either EPDM or FPM.
DURAPIPE ABS BUTTERFLY VALVESReinforced Polypropylene body, fully lined, with ABS disc.Full flanged design, with oval holes/inserts to suit various standard flange drillings.Lever operated, with 10 x 10° position stops, and locking device
PRESSURE RATING50mm to 250mm - PN 10 at 20°C315mm - PN 8 at 20°C
PRIMARY LINERAvailable in EPDM, FPM, or NBR
ACTUATIONElectric, Pneumatic, or Gearbox (standard on sizes over 225mm).
email: [email protected] web: www.durapipe.co.uk 71
Corzan• Solvent weld thermoplastic pipe system for aggressive
substances. • Designed specifically for use in highly corrosive
conditions at temperatures up to 95ºC. • Valves range available.
Polypropylene • Thermoplastic pipe heat-weld system to convey
chemicals at temperatures up to 100ºC.• Excellent resistance to a wide range of substances.• Available in larger diameters up to 500mm. • Full range of valves.
PVC-U• Versatile, general purpose solvent weld pipework
system with an extensive range of valves and fittings.The established system for process and industrialhandling of chemicals and water up to 60ºC.
Air-Line Xtra • High performance thermoplastic pipework system for
compressed air.
Friatherm • A better way for hot and cold water offering quick,
easy and efficient installations.
Vulcathene• Safe chemical drainage • Two easy jointing methods - Mechanical or Enfusion • Ideal for schools, universities and colleges, hospitals
and clinics, pharmaceutical and researchorganisations.
Other Durapipe UK systems
Distributor
D0930 June 2003
Durapipe UKWalsall Road CannockStaffordshireWS11 9NSUnited KingdomTel: +44 (0)1543 279909Fax: +44 (0)1543 279450email: [email protected]: www.durapipe.co.uk
For further information on all Durapipe products and services contact our Internal Sales Department as detailed below.