of 23/23
This guide has been sponsored by ATG’s Communications & Networking Technology Guide Series Dense Wavelength Division Multiplexing

Dwdm ciena

  • View
    1.735

  • Download
    48

Embed Size (px)

Text of Dwdm ciena

  • 1.Ciena.Final 6/3/97 5:56 PMPage 1 Dense WavelengthDivision Multiplexing ATGs Communications & Networking Technology Guide SeriesThis guide has been sponsored by

2. Ciena.Final6/3/97 5:56 PM Page 2Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 The Growing Demand . . . . . . . . . . . . . . . . . . . . . 2 Bandwidth Demand Driven By . . . . . . . . . . . . . . 3 Telecomunications Infrastructure GoodBut Overwhelmed . . . . . . . . . . . . . . . . . . . . . . 5 Achieving Bandwith Capacity Goals . . . . . . . . . . 6 Dense Wavelength Division Multiplexing . . . . . . . 9 Parlaying New Technologies intoa DWDM System . . . . . . . . . . . . . . . . . . . . . 13 Network Management . . . . . . . . . . . . . . . . . . . . 14 Measurements of Performance. . . . . . . . . . . . . . 15 Applications for DWDM . . . . . . . . . . . . . . . . . . 18 The Future of DWDMBuilding Blockof the Photonic Network . . . . . . . . . . . . . . . . 20 ANNEX: Practical Considerations ofDWDM Deployment . . . . . . . . . . . . . . . . . . . 22 CASE STUDY: How CIENA CorporationTeamed With Sprint to Break theFiber Bandwidth Barrier . . . . . . . . . . . . . . . . 25 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 About the Editor Gerald P. Ryan is the founder of Connections Telecommunications Inc., a Massachusetts-based company specializing in consulting, education and soft- ware tools which address Wide Area Network issues. Mr. Ryan has developed and taught numerous courses in network analysis and design for carriers, gov- ernment agencies and private industry. Connections has provided consulting CIENA Corporation develops, manufactures and markets high capacitysupport in the areas of WAN network design, negotiation with carriers for fiber optic transmission systems for public networks. These systems contract pricing and services, technology acquisition, customized software development for network administration, billing and auditing of telecommuni- unlock fiber bandwidth, improve network reliability, and significantlycations expenses, project management, and RFP generation. Mr. Ryan is a reduce the cost of providing new broadband services. CIENAs transpar-member of the Networld+Interop program committee. ent optical systems deliver transmission capacities many times greaterThis book is the property of The Applied Technologies Group and is made than any in service today. Development of such advanced, high capacity available upon these terms and conditions. The Applied Technologies transmission and switching systems represent a challenge that can not be Group reserves all rights herein. Reproduction in whole or in part of this addressed solely by application of electronic time division multiplexing.book is only permitted with the written consent of The Applied Tech- Through the application of its advanced technology, CIENA is setting a nologies Group. This report shall be treated at all times as a proprietarydocument for internal use only. This book may not be duplicated in any way, new standard for bandwidth.except in the form of brief excerpts or quotations for the purpose of review.In addition, the information contained herein may not be duplicated inother books, databases or any other medium. Making copies of this book, orany portion for any purpose other than your own, is a violation of UnitedStates Copyright Laws. The information contained in this report is believedto be reliable but cannot be guaranteed to be complete or correct.Copyright 1997 by The Applied Technologies Group, One Apple Hill,Suite 216, Natick, MA 01760, Tel: (508) 651-1155, Fax: (508) 651-1171CIENA Corporation, 920 Elkridge Landing Rd, Linthicum, MD 21090 E-mail: [email protected] Web Site: http:/ /www.techguide.com phone: 410-865-8500 e-mail: [email protected] 3. Ciena.Final 6/3/97 5:56 PMPage 2 Introduction Every aspect of human interplayfrom business, toentertainment, to government, to academiaincreas-ingly depends on rapid and reliable communicationOver the last decade, fiber optic cables have beennetworks. Indeed, the advent of the Internet alone is installed by carriers as the backbone of their interoffice introducing millions of individuals to a new world of networks, becoming the mainstay of the telecommuni-information and technology. The telecommunications cations infrastructure. Using time division multiplexing industry, however, is struggling to keep pace with these (TDM) technology, carriers now routinely transmitchanges. Early predictions that current fiber capacities information at 2.4 Gb/s on a single fiber, with some would be adequate for our needs into the next century deploying equipment that quadruples that rate to 10have proven wrong. Gb/s. The revolution in high bandwidth applications and the explosive growth of the Internet, however, have created capacity demands that exceed traditional TDM limits. As a result, the once seeminglyBandwidth inexhaustible bandwidth promised by the deployment Demand of optical fiber in the 1980s is being exhausted. To meet growing demands for bandwidth, a technology called Dense Wavelength Division Multiplexing (DWDM) has been developed that multiplies theTime capacity of a single fiber. DWDM systems being deployed today can increase a single fibers capacity sixteen fold, to a throughput of 40 Gb/s! This cutting edge technologywhen combined with network Bandwidth Demand management systems and add-drop multiplexers enables carriers to adopt optically-based transmission Driven By networks that will meet the next generation of band- width demand at a significantly lower cost thanGrowing Competition installing new fiber. During the past several years, a trend has developedthroughout the world to encourage competition in thetelecommunication sector through government deregu- The Growing Demand lation and market-driven economic stimulation. Sincecompetition was introduced into the US long-distancemarket in 1984, revenues and access lines have grown 40 It is clear that as we approach the 21st century thepercent, while investment in outside plant has increased remarkable revolution in information services has60 percent. The 1996 Telecommunication Reform Act permeated our society. Communication, which in theis giving way to an even broader array of new operators, past was confined to narrowband voice signals, nowboth in the long-distance and local-exchange sectors, demands a high quality visual, audio, and data context.which promise to drive down telecommunications costs2 Dense Wavelength Division Multiplexing Technology Guide 3 4. Ciena.Final 6/3/97 5:56 PMPage 4 and thereby create new demand for additional services usage, which some analysts predict will grow by 700 and capacity. Moreover, while early competition among percent annually in coming years, is threatening to long distance carriers was based mainly on a strategy ofoverwhelm telephone access networks and further price reduction, todays competitive advantage dependsstrain the nations fiber backbone. The growth of increasingly on maximizing the available capacity ofcellular and PCS is also placing more demand on fiber network infrastructures and providing enhanced relia- networks, which serve as the backbone even for wireless bility. communications. Network SurvivabilityAnother significant cause of bandwidth demand is Telecommunications the carriers need to guarantee fail-safe networks. As telecommunications has become more critical to busi-Infrastructure Good But nesses and individuals, service providers have been Overwhelmed required to ensure that their networks are fault tolerant and impervious to outages. In many cases, telephone companies must include service level guarantees in Since the early 1980s, the telecommunications business contracts, with severe financial penalties infrastructurebuilt on a hierarchy of high should outages occur. performance central office switches and copper linesTo meet these requirements, carriers have broad- has been migrating to massive computerization and ened route diversity, either through ring configurationsdeployment of fiber optic cables. The widespread use or 1:1 point-to-point networks in which back-up of fiber has been made possible, in part, by the capacity is provided on alternate fibers. Achieving industrys acceptance of SONET and SDH as the 100% reliability, however, requires that spare capacity standard for signal generation.1 Using SONET/SDH be set aside and dedicated only to a backup function. standards, telecommunication companies have gradu- This potentially doubles the bandwidth need of an ally expanded their capacity by increasing data trans- already strained and overloaded system, since the mission rates, to the point that many carriers now protective path capacity must equal that of the routinely transport 2.4 Gb/s (STM16/OC48). revenue-generating working path. The bad news, however, is that the once seemingly inexhaustible capacity promised by ever increasing SONET rates is reaching its limit. In fact, bandwidth New Applications demand is already approaching the maximum capacity At the same time that carriers are enhancingavailable in some networks. Primarily because of tech- network survivability, they must also accommodate nical limitations and the physical properties of growing customer demand for services such as video, 1 SONET is a North American standard promulgated by the American National high resolution graphics, and large volume data Standards Institute (ANSI). There is an equivalent standard approved by the International Telecomunications Union (ITU) called Synchronous Digital processing that require unprecedented amounts ofHierarchy (SDH). SONET and SDH refer to similar data transmission rates. bandwidth. Technologies such as Frame Relay and Synchronous Transfer Mode (STM) is used to describe SDH rates, while the Optical Carrier (OC) designation applies to SONETbased systems. ATM are also adding to the need for capacity. InternetSTM16/OC48 transmits 2.48 Gb/s, while STM64/OC192 transmits almost 10 Gb/s.4 Dense Wavelength Division Multiplexing Technology Guide 5 5. Ciena.Final 6/3/97 5:56 PMPage 6 embedded fiber, today there is a practical ceiling of 2.4 associated support systems and electronics, has been Gb/s on most fiber networks, although there are estimated to be about $70,000 per mile, with costs esca- instances where STM64/OC192 is being deployed.lating in densely populated areas. While this projection Surprisingly, however, the TDM equipment installedvaries from place to place, installing new fiber can be a today utilizes less than 1% of the intrinsic capacity ofdaunting prospect, particularly for carriers with tens of the fiber!thousands of route miles. In many cases, the right-of- way of the cable route or the premises needed to house transmission equipment is owned by a third party, such as a railroad or even a competitor. Moreover, single- Achieving Bandwidth mode fiber is currently in short supply owing to produc- Capacity Goalstion limitations, potentially adding to costs and delays. For these reasons, the comprehensive deployment of additional fiber is an impractical, if not impossible, Confronted by the need for more capacity, carrierssolution for many carriers. have three possible solutions: Install new fiber. Higher Speed TDM Deploying Invest in new TDM technology to achieve faster STM-64/OC-192 (10 Gb/s)bit rates.As indicated earlier, STM64/OC192 is becoming Deploy Dense Wavelength Division Multiplexing. an option for carriers seeking higher capacity, but there are significant issues surrounding this solution that may restrict its applicability. The vast majority of the existing fiber plant is single-mode fiber (SMF) that has high dispersion in the 1550 nm window, makingCurrentBandwidthDemandFiber STM64/OC192 transmission difficult. In fact, disper-Capacity sion has a 16 times greater effect with STM64/OC192 equipment than with STM16/OC48. As a result, effec- tive STM64/OC192 transmission requires either some Timeform of dispersion compensating fiber or entire new fiber builds using non-zero dispersion shifted fiber (NZDSF) which costs some 50 percent more than SMF. The greater carrier transmission power associated with the higher bit Installing New Fiber to Meet Capacity Needs rates also introduces nonlinear optical effects that cause For years, carriers have expanded their networks by degraded wave form quality. deploying new fiber and transmission equipment. ForThe effects of Polarization Mode Dispersion each new fiber deployed, the carrier could add capacity (PMD)which, like other forms of dispersion affects the up to 2.4 Gb/s. Unfortunately, such deployment is distance a light pulse can travel without signal degrada- frequently difficult and always costly. The average costtionis of particular concern for STM-64/OC192. to deploy the additional fiber cable, excluding costs ofThis problem, barely noticed until recently, has become6 Dense Wavelength Division MultiplexingTechnology Guide 7 6. Ciena.Final 6/3/97 5:56 PMPage 8 significant because as transmission speeds increase,Evolution of WDM dispersion problems grow exponentially thereby dramat-16+ Channels ically reducing the distance a signal can travel. PMD0.8 nm spacing appears to limit the reliable reach of STM64/OC192 Dense WDM, integrated systemswith network management, to about 70 kms on most embedded fiber. Although1996 add-drop functions. there is a vigorous and ongoing debate within the24 Channels industry over the extent of PMD problems, some keyEarly35 nm spacingPassive WDM components/parts 1990s issues are already known.2 Channels PMD is particularly acute in the conventional single- 1980s Wideband WDM1310, 1550mode fiber that comprises the vast majority of theexisting fiber plant, as well as in aerial fiber. Unlike other forms of dispersion that are fairlypredictable and easy to measure, PMD variessignificantly from cable to cable. Moreover, PMDis affected by environmental conditions, making itDense Wavelengthdifficult to determine ways to offset its effect onhigh bit rate systems.Division Multiplexing As a result, carriers must test nearly every span of DWDM technology utilizes a composite opticalfiber for its compatibility with STM64/OC192;signal carrying multiple information streams, eachin many cases, PMD will rule out its deploymenttransmitted on a distinct optical wavelength. Althoughaltogether.wavelength division multiplexing has been a knowntechnology for several years, its early application wasrestricted to providing two widely separated A Third Approach DWDMwideband wavelengths, or to manufacturing compo- Dense Wavelength Division Multiplexing (DWDM) is nents that separated up to four channels. Only recently a technology that allows multiple information streams to has the technology evolved to the point that parallel be transmitted simultaneously over a single fiber at datawavelengths can be densely packed and integrated into rates as high as the fiber plant will allow (e.g. 2.4 Gb/s). a transmission system, with multiple, simultaneous, The DWDM approach multiplies the simple 2.4 Gb/s extremely high frequency signals in the 192 to 200 tera- system by up to 16 times, giving an immense and imme-hertz (THz) range. By conforming to the ITU channel diate increase in capacityusing embedded fiber! Aplan, such a system ensures interoperability with other sixteen channel system (which is available today) supportsequipment and allows service providers to be well posi- 40 Gb/s in each direction over a fiber pair, while a 40tioned to deploy optical solutions throughout their channel system under development will support 100networks. The 16 channel system in essence provides a Gb/s, the equivalent of ten STM64/OC192 transmit-virtual 16fiber cable, with each frequency channel ters! The benefits of DWDM over the first two optionsserving as a unique STM16/OC48 carrier. adding fiber plant or deploying STM64/OC192for increasing capacity are clear.8 Dense Wavelength Division Multiplexing Technology Guide 9 7. Ciena.Final 6/3/97 5:57 PM Page 10 Transmitter Receiver1Transmission 1 TransmitterReceiverDemultiplexer22 Multiplexer TransmitterReceiver33 Transmitter Receiver nn 600 KM Demultiplexers To transmit 40 Gb/s over 600 kms using a traditional system would require 16 separateWith signals as precise and as dense as those used fiber pairs with regenerators placed every 35 in DWDM, there needed to be a way to provide accu- kms for a total of 272 regenerators.rate signal separation, or filtration, on the optical A 16 channel DWDM system, on the otherreceiver. Such a solution also needed to be easy to hand, uses a single fiber pair and 4 amplifiers implement and essentially maintenance free. Early positioned every 120 kms for a total of 600 kms.filtering technology was either too imprecise for DWDM, too sensitive to temperature variations and polarization, too vulnerable to crosstalk from neighboring channels, or too costly. This restricted the evolution of DWDM. To meet the requirements for16 channel WDM multiplexershigher performance, a more robust filtering technology was developed that makes DWDM possible on a cost effective basis: the infiber Bragg grating. The new filter component, called a fiber grating,The most common form of DWDM uses a fiberconsists of a length of optical fiber wherein the refrac- pairone for transmission and one for reception.tive index of the core has been permanently modified Systems do exist in which a single fiber is used for bi-in a periodic fashion, generally by exposure to an ultra- directional traffic, but these configurations must sacri- violet interference pattern. The result is a component fice some fiber capacity by setting aside a guard band to which acts as a wavelength dependent reflector and is prevent channel mixing; they also degrade amplifier useful for precise wavelength separation. In other performance. In addition, there is a greater risk thatwords, the fiber grating creates a highly selective, reflections occurring during maintenance or repairnarrow bandwidth filter that functions somewhat like a could damage the amplifiers. In any event, themirror and provides significantly greater wavelength availability of mature supporting technologies, likeselectivity than any other optical technology. The filter precise demultiplexers and Erbium Doped Fiber wavelength can be controlled during fabrication Amplifiers (EDFA), has enabled DWDM with eight, through simple geometric considerations which enable sixteen, or even higher channel counts to be commer-reproducible accuracy. Because this is a passive device, cially delivered. fabricated into glass fiber, it is robust and durable.10 Dense Wavelength Division Multiplexing Technology Guide 11 8. Ciena.Final6/3/97 5:57 PM Page 12 Fiber Circuits at Location AFiber Circuits at Location CErbium Doped Fiber AmplifierNetwork Optical Amplifier ManagementUnit AmplifiedLineAdd Drop Line Amplified11 Spontaneous AmplifierMultiplexer Amplifier Demultiplexer channel uits Spontaneous Multiplexer Emissions Emissions 16161550 nm bandErbium doped fiberW-E-E-Wsignal inputTerminalTerminal pump signalpump signal inputoutputSpectrum of a typical EDFAFiber Circuits Dropped -20 and Added to Location B -30 -40 4,000 GHz -50 -60 -70 Parlaying New Technologies 150015201540 1560 1580 1600 wavelengthinto a DWDM SystemThe fiber Bragg grating and the EDFA represented The advent of the Erbium Doped Fiber Amplifier significant technological breakthroughs in their own(EDFA) enabled commercial development of DWDM right, but the bandwidth potential associated with thesesystems by providing a way to amplify all the innovations could only be realized by their incorporationwavelengths at the same time. This optical amplification into integrated DWDM transport systems for opticalis done by incorporating Erbium ions into the core of a networks. Without such a development the fiber gratingspecial fiber in a process known as doping. Optical pump would retain component status similar to other passivelasers are then used to transfer high levels of energy to WDM devices, while the power potential of EDFAsthe special fiber, energizing the Eribum ions which then would remain underutilized. The ability to harness theboost the optical signals that are passing through. potential of these technologies, however, is realizableSignificantly, the atomic structure of Erbium provides today through commercially available, integrated,amplification to the broad spectral range required for DWDM systems. Such a system is attained through thedensely packed wavelengths operating in the 1550nm use of Optical AddDrop Multiplexers (OADM) andregion, optically boosting the DWDM signals. Instead of sophisticated network management tools.multiple electronic regenerators, which required that theoptical signals be converted to electrical signals then backAdd/Drop Configurationagain to optical ones, the EDFA directly amplifies theExpressoptical signals. Hence the composite optical signals can Traffictravel up to 600 kms without regeneration and up to 120TerminalTerminalkms between amplifiers in a commercially available, OADMterrestrial, DWDM system. Local Traffic Local Traffic12 Dense Wavelength Division MultiplexingTechnology Guide 13 9. Ciena.Final 6/3/97 5:57 PM Page 14 Optical AddDrop Multiplexers Telecommunications Management Network (TMN). Current systems utilize an optical service channel that is The OADM based on DWDM technology is moving independent of the working channels of the DWDM the telecommunications industry significantly closer to the product to create a standardsbased data communications development of optical networks. The OADM can be network that allows service providers to remotely monitor placed between two end terminals along any route and be and control system performance and use. This network substituted for an optical amplifier. Commercially avail- manager communicates with each node in the system and able OADMs allow carriers to drop and/or add up to also provides dual homing access and selfhealing routing four STM16/OC48 channels between DWDM termi- information in the event of a network disruption. By nals. The OADM has express channels that allow meeting ITU standards and utilizing a Q3 interface, the certain wavelengths to pass through the node system ensures that end users retain high Operations, uninterrupted, as well as broadcast capabilities that enable Administration, Maintenance, and Provisioning (OAM&P) information on up to four channels to be dropped and service. simultaneously continue as express channels. By deploying an OADM instead of an optical amplifier, Network Management Layered Architecture service providers can gain flexibility to distributeEML Element Management Layer revenuegenerating traffic and reduce costs associated Standards based, GUI, Unix Equipment & Service MO Views with deploying end terminals at low traffic areas along aDCN DCN route. The OADM is especially well-suited for meshed or IP/Internet protocol based Self healing service channel branched network configurations, as well as for ring archi-Agent Agent Layer Backplane Protocol Menu based craft interface tectures used to enhance survivability. Such flexibility is Protocol independent less achievable with current STM64/OC192 offerings. BackplaneInstrumentation Redundant NE M&C bus Instrumentation Intelligent plug-in modules Network ManagementMeasurements of PerformanceA critical yet often under appreciated part of anyThere are several aspects that make the design of telecommunications network is the management systemDWDM systems unique. A spectrum of DWDM chan- whose reliability is especially vital in the complex and high nels may begin to accumulate tilt and ripple effects as capacity world of DWDM. Indeed, dependable andthe signals propagate along a chain of amplifiers. easily accessible network management services increas-Furthermore, each amplifier introduces amplified spon- ingly will become a distinguishing characteristic of high-taneous emissions (ASE) into the system, which cause a performance, high-capacity systems. Todays leading decrease in the signal to noise ratio, leading to signal DWDM systems include integrated, network manage-degradation. Upon photodetection, some other features ment programs that are designed to work in conjunctionof optically amplified systems come into play. The Bit with other operations support systems (OSSs) and areError Rate (BER) is determined differently in an opti- compliant with the standards the Internationalcally amplified system than in a conventional regener- Telecommunication Union (ITU) has established for ated one. The probability of error in the latter is domi-14 Dense Wavelength Division MultiplexingTechnology Guide 15 10. Ciena.Final 6/3/97 5:57 PM Page 16 nated by the amount of receiver noise. In a properly Fiber Non Linearities designed optically amplified system, the probability ofIn addition to ASE accumulation and dispersion, there are error in the reception of a binary value of one is deter-several types of fiber nonlinearities that can further limit the perfor- mined by the signal mixing with the ASE, while the mance of any fiber optic transmission systemincluding those that useDWDM. These nonlinearities fall into two broad groups: scattering and probability of error in the reception of a binary valuerefractive index phenomena. of zero is determined by the ASE noise value alone.Scattering Phenomena One subtype of this phenomena is known as Stimulated BrillouinScattering (SBS), which is caused by the interaction between the optical Optical SNR and Transmitted Powersignal and acoustic waves in the fiber. The result is that power from theoptical signal can be scattered back towards the transmitter. SBS is a Requirements of DWDM Systems narrowband process that affects each channel in a DWDM systemindividually, but which is even more pronounced in STM64/OC192 Ultimately, the BER performance of a DWDMsystems, due to the greater power levels required for their transmission. channel is determined by the optical SNR that is deliv- A second form of scattering is known as Stimulated Raman ered to the photodetector. In a typical commercial Scattering (SRS), which is prompted by the interaction of the opticalsignal with silica molecules in the fiber. This interaction can lead to the system, an optical SNR of approximately 20 dB, transfer of power from shorter wavelength, higher photon energy chan- measured in a 0.1 nm bandwidth, is required for an nels, to longer wavelength, lower photon energy channels. Unlike SBS,SRS is a wideband phenomena that affects the entire optical spectrum acceptably low BER of 1015. This acceptable SNR isthat is being transmitted. SRS can actually cause a spectrum of equal delivered through a relatively sophisticated analysis of amplitude channels to tilt as it moves through the fiber. Moreover, itsimpact worsens as power is increased and as the total width of the signal strength per channel, amplifier distances, andDWDM spectrum widens. One way to combat this phenomena is to usemoderate channel powers as well as a densely packed channel plan that the frequency spacing between channels.minimizes the overall width of the spectrum. For a specific SNR at the receiver, the amount ofRefractive Index Phenomena transmit power required in each channel is linearly propor- This group of nonlinearities includes self-phase modulation tional to the number of amplifiers as well as the noise and(SPM), cross-phase modulation (CPM), and four-wave mixing (FWM).These are caused because the index of refraction, and hence the speed SNR of each amplifier, and is exponentially proportional toof propagation in a fiber, is dependent on the intensity of lighta the loss between amplifiers. Because total transmit power is dependency that can have particularly significant effects in longhaulapplications. SPM, which refers to the modulation that a light pulse has constrained by present laser technology and fiber nonlin-on its own phase, acts on each DWDM channel independently. The earities, the workable key factor is amplifier spacing. This isphenomena causes the signals spectrum to widen and can lead tocrosstalk or an unexpected dispersion penalty. By contrast, CPM is due illustrated in the accompanying graph by showing the rela- to intensity fluctuations in another channel and is an effect that is tionship for a fiber plant with a loss of .3 dB/km, a receiver unique to DWDM systems. Finally, four-wave mixing refers to thenonlinear combination of two or more optical signals in such a way with a .1nm optical bandwidth, and optical amplifiers with that they produce new optical frequencies. Although four-wave mixing a 5 dB noise figure. The system illustrated is expected to is generally not a concern in conventional single-mode fiber, it can beparticularly troublesome in the dispersion shifted fiber that is used to cover 600 kms and the optical SNR required at the receiver propagate STM64/OC192. As a result, carriers that opt for is 20 dB measured in the 0.1 nm bandwidth. STM64/OC192 equipment to relieve todays congestion may unin-tentionally be limiting their ability to grow their capacity through future600 Km total length, .3 dB/km loss, .1 nm bandwith, 20 dB SNRdeployment of DWDM. 3025 All three types of refractive index phenomena can be controlled20either through careful choice of channel power or increases in channel15 10spacing.2Powerin dBm 5 0-5 -10 -152 SeeTransmission of Many WDM Channels Through a Cascade of EDFAs in Long -20 101001000distance Links and Ring NetworksAlan Willner and Syang Myau Hwang IEEE0733872/95 Journal of Lightwave TechnologyAmplifier Spacing (Kms)16 Dense Wavelength Division MultiplexingTechnology Guide 17 11. Ciena.Final 6/3/97 5:57 PM Page 18 Applications for DWDMSONET RINGSAs occurs with many new technologies, the poten- tial ways in which DWDM can be used are only begin- ning to be explored. Already, however, the technology has proven to be particularly well suited for several vital applications. DWDM is ready made for long-distance telecom-munications operators that use eitherpointtopoint or ring topologies. The suddenavailability of 16 new transmission channels wherethere used to be one dramatically improves anoperators ability to expand capacity and simulta-neously set aside backup bandwidth withoutinstalling new fiber. This large amount of capacity is critical to thedevelopment of self-healing rings, which charac-terize todays most sophisticated telecom networks.By deploying DWDM terminals, an operator canconstruct a 100% protected, 40 Gb/s ring, with16 separate communication signals using only twofibers. Operators that are building or expanding theirnetworks will also find DWDM to be an econom-ical way to incrementally increase capacity, rapidlyprovision new equipment for needed expansion, The transparency of DWDM systems to variousand futureproof their infrastructure against bit rates and protocols will also allow carriers tounforeseen bandwidth demands. tailor and segregate services to various customers Network wholesalers can take advantage ofalong the same transmission routes. DWDMDWDM to lease capacity, rather than entire fibers, allows a carrier to provide STM4/OC12either to existing operators or to new marketservice to one customer and STM16/OC48entrants. DWDM will be especially attractive toservice to another all on a shared ring!companies that have low fiber count cables that In regions with a fast growing industrial basewere installed primarily for internal operations but DWDM is also one way to utilize the existing thinthat could now be used to generate telecommuni- fiber plant to quickly meet burgeoning demand.cations revenue.18 Dense Wavelength Division Multiplexing Technology Guide 19 12. Ciena.Final 6/3/97 5:57 PM Page 20 The Future of DWDM For example, DWDM systems with openinterfaces give operators the flexibility to provide Building Block of theSONET/SDH, asynchronous/PDH, ATM, Photonic Network Frame Relay, and other protocols over the samefiber. Open systems also eliminate the need foradditional high-performance optical transmittersDWDM is already established as the preferredto be added to a network when the need arises to architecture for relieving the bandwidth crunch many interface with specific protocols. Rather, open carriers face. Several US carriers have settled on systems allow service providers to quickly adapt DWDM at STM16/OC48 rates as their technology new technologies to the optical network through of choice for gaining more capacity. With 16 channel the use of off-the-shelf, relatively inexpensive, DWDM now being deployed throughout the carrier and readily available transmitters. infrastructure, and with a 40 channel system coming, DWDM will continue to be an essential element of In contrast to DWDM equipment based on propri- future interoffice fiber systems. Indeed, deployment ofetary specifications, systems with open interfaces DWDM is a critical first step toward the establishment provide operators greater freedom to provision of photonic networks in the access, interoffice, and services and reduce long-term costs. Proprietary interexchange segments of todays telecommunicationbased systems, in which SONET/SDH equipment infrastructure.is integrated into the optical multiplexer/demulti-plexer unit, are adequate for straight pointtopoint The Photonic Network configurations. Nevertheless, they require additionaland costly transmission equipment when deployedChannels 1 2 3in meshed networks. RING TOPOLOGY Terminals 4 5 6 7 8 for Protection910111213141516ATM= RegeneratorsOC-3ASYNCH/PDH OC-12SONET/SDH ProprietaryOC-48Optical OpticalDIG VIDEOSystems PC-48Amplifier Amplifier Terminals Optical Add/Drop MultiplexerGiven the rapidly changing and unpredictable nature of the telecommunications industry, it is impera- tive that todays DWDM systems have the ability toOpen Terminal Terminal adapt to future technological deployments and networkSystem configurations. DWDM systems with an open architec- ture provide such adaptability and prepare service providers to take full advantage of the emerging Terminal photonic network.20 Dense Wavelength Division Multiplexing Technology Guide 21 13. Ciena.Final 6/3/97 5:57 PM Page 22 Finally, DWDM systems that comply with the 1. Compatibility with Fiber Plant.ITU channel plan will reassure carriers that they The majority of the legacy fiber plant cannotare deploying technology with recognized industry support high bit rate TDM. Earlier vintage fiberstandards and the flexibility needed to grow theirhas some attributes that lead to significant disper-optical networks into long distance, localsion and would, therefore, be incompatible withexchange, and eventually access networks. high bit rate TDM. Recently produced fiberNZDSF, for exampleis flexible enough for theIn the space of two years, DWDM has becomelatest TDM equipment, but it is expensive and recognized as an industry standard that will find accep- may limit the ability of carriers to migrate to the tance in any carrier environment. Deployment ofgreater bandwidth available through DWDM at DWDM will allow new services to come on-line moreSTM16/OC48 rates. quickly, help contain costs so that prospective customers 2. Transparency and Interoperability. can more easily afford new services, and readily over- The chosen solution must provide interoperability come technological barriers associated with more tradi-between all vendors transmission equipment, tional solutions. Its acceptance will drive the expansionboth existing and new. It must be vendor of the optical layer throughout the telecommunications independent and conform to international stan- network and allow service operators to exploit the enor- dards such as the proposed ITU channel spacing mous bandwidth capacity that is inherent in opticaland be based on the Open Systems fiber but that has gone largely untappeduntil now.Interconnection (OSI) model. Furthermore, itmust be capable of supporting mixed protocolsand signal formats. Some commercially availableDWDM systems provide such transparency and ANNEX: Practical can be used with any SONET/SDH bit rates, as Considerations ofwell as with asynchronous/PDH protocols. DWDM Deployment 3. Migration and Provisioning Strategy.The best solution must also offer the ability toexpand. It must be capable of supportingBased on bit rate alone, DWDM has a fourfolddiffering bit rates and have channel upgrade advantage even over the latestalbeit nascentTDMcapability. It has to be a long-term solution and option, STM64/OC192. To fairly compare the twonot just a short-term fix. TDM systems already technologies, however, we need to review and outlineare reaching their technological barriers and what would be an ideal technological solution forSTM64/OC192, although rich in capacity, expanding network capacity. This has to be done in amay represent a practical limit that could only be broad sense, recognizing that there are instances insuperseded by DWDM. which TDM may offer a better solution than DWDM. Analyzing the alternative attributes and benefits of4. Network Management. A properly engineered each approach would require a comparison of severalsolution should also support a comprehensive key issues:network element management system. The solu-22 Dense Wavelength Division MultiplexingTechnology Guide 23 14. Ciena.Final 6/3/97 5:57 PM Page 24 tion must meet international standards, interface with the carriers existing operating system, and CASE STUDY: provide direct connection for all of the networkHow CIENA Corporation elements for performance monitoring, fault iden- tification and isolation, and remedial action. Teamed With Sprint to Break Sophisticated and reliable network management the Fiber Bandwidth Barrier programs will become increasingly important to deal with the increased complexity and expandedWe knew we had the best kind of business capacity that will be unleashed through migration problem, said Douglas McKinley, Director of Network to optical networks.Planning for Sprint, the global communications 5. Technical Constraints. The systems deployedcompany. In early 1995, we forecast unprecedentedmust be able to resolve some of the outstandinggrowth in the Sprint network. We had huge customerstechnical issues present in current lightwave trans- all coming to us asking Sprint to carry their longmission systems. For example, signal dispersiondistance traffic. Along with all of our other customers,compensation, filtering and channel cross talk,they wanted everything - voice, video, data - and theynonlinear four-wave mixing, and physical equip-wanted it fast. How were we going to give them thement density are some of the more common prob- capacity they needed?lems. Ideally, an optimized system level architec-For Sprint, the challenge was to provide customersture that provides a coherent and unifiedwith desperately needed bandwidth in a timely and reli-approach should be chosen over one that involves able manner. The solution also needed to be cost effec-the acquisition and deployment of components ontive. And, one of the most important requirements wasa piecemeal and uncoordinated basis. that the expanded network capacity had to take advan- tage of the facilities Sprint already had in place.Sprint had built the United States only nationwide all-digital, fiber optic network that served more than 15 million businesses and residential customers. A leader in the industry, Sprint was the countrys first major provider of long distance, local, and wireless services. In addition, Sprint is the worlds largest carrier of Internet traffic.The explosive growth of Internet-related applica- tions coupled with the surge in all types of network traffic made 1995 a watershed year for the company. In addition, the passage of the Telecommunications Act of 1996 unleashed a torrent of activity in the telecommu- nications marketplace with many of the new long distance companies leasing facilities from Sprint.24 Dense Wavelength Division MultiplexingCase Study 25 15. Ciena.Final 6/3/97 5:57 PM Page 26 Ideally, the bandwidth capacity expansion solution In short, the CIENA MultiWave 1600 builds onSprint sought would also complement the carriersexisting fiber optic technology and increases itscomplete commitment to a SONET fiber network. In efficiency dramatically. By expanding the transmission1993, Sprint committed to a Synchronous Opticalcapability of fiber already installed, Sprint can meetNetwork (SONET) technology, and the company is and exceed its customers current requirements, as wellnow the only long-distance carrier with a four-fiber, bi-as the anticipated delivery of new interactivedirectional, line-switching ring topology (four-fiber, multimedia services.BLSR) installed from coast-to-coast and from border-Fiber optics transmit data as pulses of light movingto-border. The four-fiber BLSR allows customers on at 124,000 miles per second. More than 2.5 billion bitsSprints SONET network to survive network outagesof information per second can be carried over long-and fiber cuts in milliseconds. The company anticipatesdistance fiber. To keep the pulses from fading, fiber-that the majority of its customers will be on theoptic cables use amplifiers and regenerators to rechargeSONET network by the end of 1997.the power of the light approximately every 60 miles. We started looking for the solution at the concep-Traditionally, we could carry about 32 thousandtual stage, recalled Bill Szeto, Manager of Engineering transmissions in a fiber at one time, explains Szeto.for Sprint. We needed the best companies in the busi- With CIENAs MultiWave 1600 system we can carryness to focus their resources on this capacity problem so16 times this. All at once, we essentially expanded fromwe called in a few well-known manufacturers alongour 32 thousand capacity to a capability of carryingwith CIENA Corporation, a relatively new company in512 thousand calls at the same time.Maryland which we knew was developing high-capacity Efficiency is also a factor, he continued. Whenfiber optic transmission systems.you used fiber without DWDM for high-bandwidth Teaming with CIENA was just the right thing to applications, you had to use more fiber. If we can usedo. Starting with just the concept, the solution took less fewer fibers, we can increase capacity for new servicesthan a year to complete. It was unheard of in theusing our existing fiber base. And, that can translate intoindustry, considering the complexity of the problem to cost savings for customers. Economies of scale are alsohave this happen in such a short time frame. One ofapparent to Sprint with the technology offering 16 timesthe reasons it was able to happen this way is becausethe capacity at a fraction of the cost, according to Szeto.CIENA is knowledgeable. And, working right alongThe CIENA MultiWave product is a high-capacity,with Sprints technical people, there was synergy to optical transmission system which enables aggregatework efficiently, closely, and effectively. transmission capacities up to 40 Gigabits per second The solution that CIENA developed, called the (40 Gb/s) over existing fiber facilities. Sixteen discreteCIENA MultiWave 1600 system, far exceeded the channels can transmit over one fiber. Each channel isparameters required. The 16 window, dense wavelength bit-rate transparent from 150 Mb/s to 2.4 Gb/s anddivision multiplexing (DWDM) technology allows Sprintoperates with existing SONET/SDH/Asynchronousto increase the capacity of its fiber network by a factor of fiber optic terminals.16 without installing more fiber optic cable. In essence, itThis available capacity per fiber allows Sprintsgives Sprint 16 virtual fibers where it once had one. Thenetwork designers to fine tune each network spansystem meets the need for more bandwidth and providesaccording to the customers or Sprints own internalSprint with more capability in its installed plant.requirements.26 Dense Wavelength Division Multiplexing Case Study 27 16. Ciena.Final 6/3/97 5:57 PM Page 28The system also incorporates optical line ampli- to incrementally expand the transmission capacity of fiers to extend the transmission range. Designed specifi- our network as we deliver new broadband services to cally for DWDM, the amplifier is capable of our customers, amplifying the systems entire 16 channel, 40 Gb/s And, demand for more capacity to deliver those capacity. Two optical service channel modems enable services isnt going away soon. Nineteen months ago access to local network management data and all the analysts were saying they thought four - and eight - elements of the MultiWave system. channel WDM would be enough for the foreseeableIn addition, CIENAs MultiWave system for Sprint future, noted Steve Chaddick, senior vice president of is equipped with an integrated network management products and technologies at CIENA. The foreseeable system that includes an optical service channel with afuture turned out to be about three months. 2.048 Mb/s capacity, that supports the Data Communications Network (DCN). The DCN commu-The CIENA solution protects our existing nicates system management information throughoutinvestment and allows us to incrementally the Sprint network and enables vital remote access to expand the transmission capacity of our performance monitoring and control, as well asnetwork... Marty Kaplan, Senior Vice President multiple simultaneous craft interface access. Self- and Chief Technology Officer, Sprint healing information routing in the event of network disruption and dual homing access is also included.Embedded throughout the system is instrumenta- tion that observes, measures, and records the status and operation of every module. Distributed system intelli- gence analyzes, processes, and stores the data gleaned from the instrumentation. On an element-by-element basis, performance and fault information data can be accessed and manipulated by Sprint network managers.Sprint is deploying CIENAs MultiWave 1600 on selected routes throughout its network. In fact, DWDM is pervasive throughout the Sprint network, especially in high traffic areas.CIENA was given a business problem and we gave them only a short time to solve it. By working closely with us, CIENA has helped Sprint maintain its technology leadership in the telecommunications industry, McKinley commented.Marty Kaplan, senior vice president and chief technology officer for Sprint, added, The CIENA solution protects our existing investment and allows us28 Dense Wavelength Division MultiplexingCase Study 29 17. Ciena.Final 6/3/97 5:57 PM Page 30 Glossary data. (2) A binary digit, either a zero or one. Thesmallest element of a computer program. In the U.S.,eight bits make up one byte. Add-Drop (OADM)Optionally allows up to four Bit Error Rate (BER)Percentage of bits in a trans- optical wavelengths to be added or dropped at any line mittal received in error. (2) The number of coding viola- amplifier location.tions detected in a unit of time, usually one second. Add/Drop Multiplexer (ADM)A multiplexer Bits Per Second (bps)(1) The number of bits capable of extracting or inserting lower-rate signalspassing a point every second. The transmission rate for from a higher-rate multiplexed signal withoutdigital information. (2) A measurement of how fast data completely demultiplexing the signal.are moved from one place to another. (Example: a 28.8 American National Standards Institutemodem can move 28,800 bps.) (ANSI)The coordinating body for voluntary BroadbandA data-transmission scheme in which standards groups within the United States. ANSI is a multiple signals share the bandwidth of a medium. This member of the International Organization for allows the transmission of voice, data, and video signals Standardization (ISO). over a single medium. Cable television uses broadband Backbone(1) The part of a network used as the techniques to deliver dozens of channels over one cable. primary path for transporting traffic between networkCapacityThe information carrying ability of a segments. (2) A high-speed line or series of connections telecommunications facility. What the facility is deter- that forms a major pathway within a network. mines the measurement. You might measure a lines Bandwidth(1) Measure of the information capacitycapacity in bits per second. You might measure a of a transmission channel. (2) The difference betweenswitchs capacity in the maximum number of calls it the highest and lowest frequencies of a band that cancan switch in one hour, or the maximum number of be passed by a transmission medium without undue calls it can keep in conversation simultaneously. distortion, such as the AM band - 535 to 1705CarrierA company which provides communications kilohertz. (3) Information carrying capacity of acircuits. Carriers are split into private and communication channel. Analog bandwidth is the common. A private carrier can refuse you service. A range of signal frequencies that can be transmitted by a common carrier cannot. Most of the carriers in our communication channel or network. (4) A term used to industryyour local phone company, AT&T, MCI US, indicate the amount of transmission or processingSprint, etc.are common carriers. Common carriers capacity possessed by a system or a specific location in a are regulated. Private carriers are not. system (usually a network system).Channel(1) A communication path. Multiple chan- Bandwidth On Demand Interoperability Group nels can be multiplexed over a single cable in certain (BONDING)Makers of inverse muxes. environments. The term is also used to describe the Bit(1) The smallest unit of information in the binary specific path between large computers and attached system of notation. (2) One binary digit; a pulse of peripherals. (2) An electrical or photonic, in the case offiber optic-based transmission systems, communications30 Dense Wavelength Division MultiplexingGlossary 31 18. Ciena.Final 6/3/97 5:57 PM Page 32 path between two or more points of termination. ingly simple, is that they are not frequency dependent, (3) The smallest subdivision of a circuit that provides a and therefore allow bandwidth upgrades (within limits) type of communication service; usually a path withwithout replacing the entire transmission systems. only one direction. Undersea transmission systems, such as Americas 1, TAT-12/13, and TCP-5 use EDFA technology. CIENA MultiWave 1600A dense wavelength division multiplexing (DWDM) system that is capable Fiber In the Loop (FITL)Optical technology of transmitting up to sixteen (16) discrete optical chan- from CO to customer premises. nels over one fiber pair. Each channel is bit-rate trans- Fiber Optical Bragg GratingAn optical fiber parent from 150 Mb/s to 2.4 Gb/s and operates with grating is an optical fiber component consisting of a existing SONET/SDH/Asynch fiber optic terminals. length of optical fiber wherein the refractive index of This system incorporates optical line amplifiers to the core has been permanently modified in a periodic extend the transmission range, and it offers integrated fashion, generally by exposure to an optical interfer- network management facilities. ence pattern as generated by an ultraviolet laser. DeregulationThe removal of regulatory authority Fiber Optic CableA transmission medium that to control certain activities of telephone companies. An uses glass or plastic fibers, rather than copper wire, to attempt by federal authorities to make the telephone transport data or voice signals. The signal is imposed industry more competitive. Deregulation is meant to on the fiber via pulses (modulation) of light from a benefit the consumer. laser or a light-emitting diode (LED). Because of its Erbium Doped Fiber Amplifier (EDFA)high bandwidth and lack of susceptibility to interfer- Erbium Doped Fiber Amplifiers have become the ence, fiber-optic cable is used in long-haul or noisy dominant method for signal amplification in long-haul applications. lightwave transmission systems. EDFAs differ from the Fiber OpticsA method for the transmission of normal method of regenerative or electro-optic information (sound, pictures, data). Light is modulated repeaters in that light does not have to be converted to and transmitted over high purity, hair-thin fibers of an electrical signal, amplified, and then converted back glass. The bandwidth capacity of fiber optic cable is to light. Optical amplifiers contain a length of fiber much greater than that of conventional cable or that is doped with erbium doped (a rare earth copper wire. substance) that provides the gain medium, an energy source or pump from a laser source at the correct Fiber PlantArial or buried fiber optic cable that frequency, and a coupler to couple the pump laser toestablished connectivity between fiber optic transmis- the doped fiber. Both the signal to be amplified and thesion equipment locations. pump energy are coupled into the doped fiber sectionFrequency(1) Measures the number of electromag- of the transmission system. The pump laser puts the netic waves that pass a given point in a given time erbium-doped fiber into an excited state where it isperiod. It is equal to the speed of light, divided by able to provide optical gain through emission wavelengths and is expressed in cycles per second or stimulated by a passing signal photon. One of the mosthertz. (2) The number of cycles of periodic activity important features, after the fact that EDFAs are amaz- that occur in a discrete amount of time.32 Dense Wavelength Division Multiplexing Glossary 33 19. Ciena.Final 6/3/97 5:57 PM Page 34 Gigabits Per Second (Gb/s)Billion bits perMultimodeUsed to describe optical fiber that second. A measure of transmission speed. allows more than one mode of light signal transmission.Multimode fibers are generally used for short-distance InfrastructureThe basic facilities, services, andlinks. installations needed for the functioning of a commu- nity or society such as transportation and communica-Multimode FiberOptical fiber supporting propa- tions systems. gation of multiple modes of light. Interexchange Carrier (IXC) or Interexchange Multiplexer (MUX)Equipment that enables Common Carrier(1) Any individual, partnership,several data streams to be sent over a single physical association, joint-stock company, trust, governmentalline. It is also a function by which one connection from entity, or corporation engaged for hire in interstate or an (ISO) layer is used to support more than one foreign communication by wire or radio, between twoconnection to the next higher layer. (2) A device for or more exchanges. (2) A long-distance telephone combining several channels to be carried by one line or company offering circuit-switched, leased-line orfiber. packet-switched service or some combination.MultiplexingIn data transmission, a function that Interoperability Technology Association forpermits two or more data sources to share a common Information Processing (INTAP)The technical transmission medium such that each data source has its organization which has the official charter to develop own channel. Japanese OSI profiles and conformance tests.Network Element (NE)Any device which is part of ITUInternational Telecommunications Union a communications transmission path and serves one ormore of the section, line, or path terminating functions. Local Exchange Company (LEC)A telephone company that provides customer access to the world-Network Management System (NMS)A system wide public switched network through one of itsresponsible for managing at least part of a network. central offices. NMSs communicate with agents to help keep track ofnetwork statistics, resources, and performance. Megabit (Mb/s)One million bits.OC-192Optical carrier Level 192. Sonet bit rate of Megabits Per Second (Mb/s)A digital transmis-10 Gb/s. sion speed of millions of bits per second.OC-48Optical carrier Level 48. Sonet bit rate of Multi-conductor copper cableProvides trans-2.4 Gb/s. mission facilities for VF and digital services up to 1.5MB/s. Upper bit rate growth possible through newOptical Carrier (OC-x)Fundamental unit used in technology such as ADSL (Adaptive Digital Subscriber SONET (Synchronous Optical NETwork) hierarchy. Loop). OC indicates an optical signal and x represents incre-ments of 51.84 Mbps. OC-1, -3, and -12 equal opticalrates of 51, 155, and 622 Mbps.34 Dense Wavelength Division Multiplexing Glossary 35 20. Ciena.Final 6/3/97 5:57 PM Page 36 Optical Carrier 1 (OC-1)ITU-ISS physical stan-Public Switched NetworkThe combined trans- dard for optical fiber used in transmission systemsmission facilities of the worlds telephone companies operating at 51.84 Mb/s. and administrations, including all those circuits avail-able to subscribers on an unrestricted basis. Optical Carrier 3 (OC-3)Optical Carrier level 3, SONET rate of 155.52 Mb/s, matches STS-3.RegeneratorDevice that restores a degraded digitalsignal for continued transmission; also called a OSIOpen Systems Interconnection. The only inter-repeater. nationally accepted framework of standards for communication between different systems made byRegional Bell Operating Company (RBOC) different vendors. OSI was developed by the(1) One of six telephone companies created after International Standards Organization (ISO). ISOsAT&T divestiture. (2) The acronym for the local tele- major goal is to create an open systems networking phone companies created in 1984 as part of the break- environment where any vendors computer system,up of AT&T. The six RBOCs are Ameritech, Bell connected to any network, can freely share data with Atlantic, Bell South, NYNEX, Southwestern Bell, any other computer system on that network or a linkedand U.S. West. network. Most of the dominant communications proto-Repeater(1) A device that regenerates and propa- cols used today have a structure based on the OSIgates electrical signals between two network segments. model. The OSI model organizes the communications(2) Device that restores a degraded digital signal for process into seven different categories and places thecontinued transmission; also called a regenerator. categories in a layered sequence based on their relation to other user. Layers seven through four deal with end RingConnection of network elements in a circular to end communications between the message source logical topology. and the message destination, while layers three throughRing TopologyTopology in which the network one deal with network access.consists of a series of repeaters, add-drop multiplexers, Pleisiochronous Digital Hierarchy (PDH) or terminals. Ring networks are relatively immune to Asynchronous multiplexing scheme from T1 to T3 and interruption and fiber cuts, because of the multiple higher; contrast with SDH. transmission paths that are implied in the ring. ProviderA company that provides an interfaceSignaling(1) The process of sending a transmission between the teleservices platform and an installed tele- signal over a physical medium for purposes of commu- phone device, such as a telephone line or a faxnication. (2) Method of communication between machine. network components to provide control managementand performance monitoring. Public NetworkA network operated by common carriers or telecommunications administrations for the provision of circuit-switched, packet-switched and leased-line circuits to the public.36 Dense Wavelength Division MultiplexingGlossary 37 21. Ciena.Final 6/3/97 5:57 PM Page 38 Single ModeUsed to describe optical fiber thatTime Division Multiplexing (TDM)Technique allows only one mode of light signal transmission. where information from multiple channels may be allo-cated bandwidth on a single wire based on time slot Single-mode FiberAlso called monomode. Single-assignment. mode fiber has a narrow core that allows light to enter only at a single angle. Such fiber has higher bandwidthTMNTelecommunication Management Network. A than multimode fiber, but requires a light source with a concept where all OMCs (Operation and Maintenance narrow spectral width (for example, a LASER).Centers) are linked together to form a network. Acentralization occurs to facilitate control, monitoring, SurvivabilityA property of a system, subsystem,and management of all devices in the communications equipment, process, or procedure that provides anetwork. defined degree of assurance that the device or system will continue to work during and after a natural orTransport LayerOSI layer that is responsible for man-made disturbance.reliable end-to-end data transfer between end systems. SwitchA device which filters, forwards, and directs UnidirectionalOperating in only one direction. frames or circuits based on destination address.WavelengthThe length of one complete wave of Synchronous Digital Hierarchy (SDH)ITU- an alternating or vibrating phenomenon, generally TSS international standard for transmission over measured from crest to crest or from trough to trough optical fiber. of successive waves. Synchronous Optical Network (SONET) Wavelength Division Multiplexing (WDM) (1) A set of standards for transmitting digital informa- two or more colors of light on one fiber. tion over optical networks. Synchronous indicates that all pieces of the SONET signal can be tied to a single clock. (2) A CCITT standard for synchronous transmission up to multigigabit speeds. (3) A standard for fiber optics. Synchronous Transport Signal 1 (STS-1) (1) SONET standard for transmission over OC-1 optical fiber at 51.84 Mb/s. (2) A SONET frame including overhead and payload capacity. The basic SONET frame is the STS-1. STS-1s can be multiplexed or concatenated with no additional overhead.38 Dense Wavelength Division MultiplexingGlossary 39 22. Ciena.Final6/3/97 5:57 PM Page 40 MultiWave 1600TM Features: Operates over existing fiber plantVisit ATGs Web Site Provides up to 16 channels of various bit rates over one fiberto read, download, and print Integrates with existing transmission systemsall the Technology Guides Operates up to 600 km without regenerationin this series. Provides for modular capacity upgrades Integrated network management Benefits: Multiplies fiber capacity by 1600% Allows redeployment of existing equipment http://www.techguide.com Relieves fiber constraints Facilitates deployment of survivable networks Increases capacity for new services Provides rapid incremental expansion Reduces expensive fiber builds and network costs Eliminates regenerators and repeater sites Consolidates equipment from multiple fiber systems A Family of Bandwidth Solutions The significant problems we face cannot be solvedby the same level of thinking that created them. Optical Amplifier Optical AmplifierAdd/DropAlbert Einstein CIENACIENAMultiWaveTM 1600 CIENA WaveWatcher MultiWaveTM 1600TerminalIntegrated Network Terminal Management 23. Ciena.Final 6/3/97 5:57 PM Page 42 This Technology Guide is oneof a series of guides, published by ATG, designed to put complex communications and networkingtechnology concepts into practical and understandable terms.Each guide provides objective,non-biased information to assist in the internal education, evaluation and decision making process.This Technology Guide, as well as the other Communications andNetworking Technology Guides in the series, are available on ATGs Web Site.http://www.techguide.com Produced and Published by One Apple Hill, Suite 216, Natick, MA 01760Tel: (508) 651-1155 Fax: (508) 651-1171 E-mail: [email protected]