DX Air-Cooled UV/Green Series Nanosecond Lasers

High Power Compact ns Lasers

A pioneer of intracavity generation with 25 + years of

manufacturing experience and well over ten thousand

shipments worldwide, Photonics Industries offers the

broadest nanosecond (ns) UV product selection from 1W

to 55W* at 355nm and Green product selection from 2W

to 100W* at 532nm.

With its new revolutionary packaging, our new DX Air-

Cooled Series has smaller form factor, higher

performance and shorter pulse widths compared to its

ancestor, the DCH series, providing the most

compact UV output powers from 1W to 7W and

Green output powers from 2W to 14W. The DX Air-

Cooled Series lasers provide the highest average

power from one of the smallest footprint, lightest

weight short pulse width, high peak power air-

cooled industrial ns lasers commercially available in

UV and Green.

Owing to key patented technologies, intracavity

harmonic generation is inherently a more efficient

harmonic conversion that provides unmatched

superior beam quality, as well as better beam

pointing stability in a simple, compact laser

configuration making this laser the perfect tool for

precision manufacturing.

Standard feature-rich packed software allowing for

adjustable output power using real-time TTL and/or

analog control signals enables high quality process

optimization all with ease of handling, high

throughput, uncompromised process quality and

long-term stability in 24/7 applications with a low

Cost of Ownership (COO).

* For higher power models please see the DX Series.

PI Advantages

� High Power air cooled UV and Green ns laser

� The most compact, most efficient air-cooled laser

� The highest wall plug efficiency laser:

o ~10% for green

o ~6% for UV

� The shortest pulse width with rep rates up to 500kHz

� Patented intracavity UV and Green generation

� Highest Pulse Energy laser in the market

� Excellent TEM00 beam with typical M² < 1.2

� Exceptional Beam Pointing Stability < 25 μrad

� Monolithic All-In-One (AIO) ns UV and green laser

� Water cooled option available

Applications

� Laser Trimming of Embedded Passives

� Glass Marking

� Laser Direct ITO/TCO Patterning

� LED and Medical Package Marking

� Solar P1 to P3 processing

� Thin-film Scribing

� Rapid Prototyping/Stereolithography

� PCB drilling and structuring

� Marking of Plastic

� Cutting metals

� Thin Film Annealing

� LIDAR

� MALDI

UV System Specifications

Model DX-355-1 DX-355-3 DX-355-5 DX-355-7

Technology Air-Cooled

Output Characteristics

Wavelength 355 nm

Average Power 0.8W at 20kHz 2W at 20kHz 5W at 40kHz

1W at 40kHz 3W at 50kHz 5W at 50kHz 7W at 60kHz

2W at 100kHz 4W at 100kHz 6W at 100kHz

Pulse Energy ~40 μJ ~100 μJ ~150 μJ ~125 μJ

Pulse Width 10 ± 5ns @ 40 kHz

20 ± 5ns @ 100 kHz

Repetition Rate Single Shot to 200 kHz (Option to 300kHz)

Pulse to Pulse Stability† < 2% rms

Long Term Stability (8 hr ± 1° C)† < 2% rms

Beam Characteristics

Polarization Ratio Horizontal; 100:1

4σ Beam Diameter @ exit ~0.3 mm ~0.5 mm ~0.45 mm

Beam Divergence (Full Angle Far Field) < 2.5 mrad

Beam Circularity ~90%

Spatial Mode TEM00 M²<1.2

Beam Pointing Stability < 25 μrad

Operating Specifications

Interface Ethernet / RS 232 / GUI / External TTL Triggering

Power Consumption (typical) ~50 W ~130 W

Warm Up Time < 10 min

Electrical Requirement 100 to 240V AC

Line Frequency 50 to 60 Hz

Relative Humidity Non-condensing, 90% Max

Ambient Temperature** 10°C to 30°C (50° to 86°F) Operating Range

Storage Conditions -10°C to 40°C; Sea Level to 12,000 m; 0% to 90% RH, non-condensing

Physical Characteristics

Dimensions 5 in x 4.88 in x 8.5 in* 5 in x 4.88 in x 11 in*

Weight ~10 lbs ~15.5 lbs

*Dimensions given are with air cooled heatsinks. Water cooled heatsink options are available (see dimensional drawings)

**For operation outside this temperature range, please contact us

†measured at ambient temp of ± 2°C

Performance Curves

Green System Specifications

Model DX-532-2 DX-532-6 DX-532-10 DX-532-14

Technology Air-Cooled

Output Characteristics

Wavelength 532 nm

Average Power 2W at 40kHz 6W at 40kHz 10W at 50kHz 14W at 50kHz

2W at 100kHz 6W at 100kHz 10W at 100kHz 14W at 100kHz

Pulse Energy ~50 μJ ~250 μJ ~260 μJ ~330 μJ

Pulse Width 12 ± 5ns @ 40 kHz

24 ± 5ns @100kHz

Repetition Rate Single Shot to 300 kHz (Option to 500kHz)

Pulse to Pulse Stability† < 2% rms

Long Term Stability (8 hr ± 1° C)† < 2% rms

Beam Characteristics

Polarization Ratio Vertical; 100:1

4σ Beam Diameter @ exit ~0.3 mm ~0.4 mm ~0.45 mm

Beam Divergence (Full Angle Far Field) < 3 mrad < 2.5 mrad

Beam Circularity ~90%

Spatial Mode TEM00 M²<1.3

Beam Pointing Stability < 25 μrad

Operating Specifications

Interface Ethernet / RS 232 / GUI / External TTL Triggering

Power Consumption (typical) ~50 W ~130 W

Warm Up Time < 10 min

Electrical Requirement 100 to 240V AC

Line Frequency 50 to 60 Hz

Relative Humidity Non-condensing, 90% Max

Ambient Temperature** 10°C to 30°C (50° to 86°F) Operating Range

Storage Conditions -10°C to 40°C; Sea Level to 12,000 m; 0% to 90% RH, non-condensing

Physical Characteristics

Dimensions 5 in x 4.88 in x 8.5 in* 5 in x 4.88 in x 11 in*

Weight ~10 lbs ~15.5 lbs

*Dimensions given are with air cooled heatsinks. Water cooled heatsink options are available (see dimensional drawings)

**For operation outside this temperature range, please contact us

†measured at ambient temp of ± 2°C

Performance Curves

Dimensional Drawings

DX-355-1 & -532-2 Laser

without air cooled heatsink with air cooled heatsink

DX-355-3, 5 & 7, -532-6, 10 & 14 Laser

with water cooled version with air cooled heatsink

1800 Ocean Ave. Ronkonkoma, NY USA 11779 Phone: 631-218-2240 Fax: 631-218-2275

E-Mail: info@photonix.com Website: www.photonix.com

Due to Photonics Industries’ commitment to continuous product improvement, specifications and drawings are subject to change without notice.

Photonics Industries conforms to provisions of US 21 CFR 1040.10 & 1040.11 and is made under one or more US patents

listed below: 9,882,335, 9,531,147, 8,817,831, 7,869,471, 7,346,092, 7,082,149, 7,079,557, 6,999,483, 6,980,574,

6,961,355, 6,842,293, 6,762,405, 6,587,487, 6,584,134, 6,366,596, 6,356,578, 6,327,281, 6,246,707, 6,229,829, 6,108,356,

6,061,370, 6,028,620, 5,936,983, 5,898,717 and Pending Patents

Copyright © 2019 by Photonics Industries International, Inc.

レイチャーシステムズ株式会社

〒160-0006 東京都新宿区舟町７ ロクサンビル７Ｆ

TEL:03-3351-0717 FAX:03-3351-6771

URL:http://www.rayture-sys.co.jp

E-mail : laser@rayture-sys.co.jp