7/27/2019 E-TCS-RTB
2/2
Beneftsl
A 100% guarantee that the mixture, right rom therst gram,
undergoes the desired thermal treatment
in order to combat bacteria, such as salmonella.
l Guaranteed rst-in/rst-out o the mixture in the
Retention Time Barrel.
l Bypass system, or non-thermally treated mixtures
at start o production or at emergency stop, is no
longer required.
l Lower energy consumption o the pellet mill due to
higher temperature o the mixture, generated by
relatively inexpensive, dry steam.
l Up to 15% increase o pelleting capacity, due to
higher temperature and improved absorption o
steam.
l Easy to clean.
l Longer maintenance intervals.
l Simple design.
A closed, insulated and heated mixing chamber
(TCS) in which a mixture is heated with dry steam bya shat
rotating in two directions.
Two PT 100 temperature sensors register the preset
temperature ater which a rotating disc is opened.
The mixture is discharged into the Retention Time Barrel
(RTB) where it remains during a preset length o time
(2-4 min.). By means o an equalizing device the mixture
is continuously ed into the pellet mill.
Temperature Control System
(TCS) and
Retention Time Barrel (RTB)
Pelleting Technology Nederland
Duinweg 18, 5482 VR Schijndel, The NetherlandsPostbus 132, 5480
AC Schijndel, The Netherlands
T +31 (0) 73 - 54 98 472
F +31 (0) 73 - 54 78 595
E [email protected]
W www.ptn.nl
Technical specifcations TCSl All components that come into
contact with the
product are manuactured rom stainless steel.
l Solid shat with interchangeable paddles,
adjustable in both height and pitch.
l Built-in scrapers at endplates.
l Rotating disc with adjustable passage.
l Powered by gear motor, suitable or use with
requency converter.
l Transmission via timing belt.
l Large inspection hatches with saety switch.
l Two temperature sensors PT 100.
l 1 Steam inlet 3 and 2 liquid inlets 1.
l Mixing chamber and inspection hatches insulated
with rock-wool.
l Electric heating system with adjustable thermostat
30 - 110 Celsius.
l Hammered aluminium plate nish and two-
component silk matt nish RAL 6024/1015.
TCS + RTB
Product description:
Data subject to change.
04/2011
Technical specifcations RTBl All components that come into
contact with the
product are manuactured rom stainless steel.
l Solid shat with large fight and inclined pitch.
l Stung box sealings on shat.
l Powered by gear motor, suitable or use with
requency converter.
l Transmission via timing belt.
l Large inspection hatches with saety switch.
l Temperature sensor PT 100.l Insulated with rock-wool.
l Electric heating system with adjustable thermostat
30 - 110 Celsius.
l Hammered aluminium plate nish and two-
component silk matt nish RAL 6024/1015.
Type RTB Dimensions in mm
A B C D
RTB 700 x 3000 1425 1040 3550 400
RTB 900 x 3000 1860 1260 3700 530
RTB 900 x 4000 1860 1260 4650 530
RTB 900 x 4500 1860 1260 5150 530
RTB 900 x 5660 1860 1260 6300 530
