Upload
lamkiet
View
222
Download
0
Embed Size (px)
Citation preview
EARTH ANCHORING SYSTEMSFOR TEMPORARY &
PERMANENT STRUCTURES
EARTH ANCHORING SYSTEMSFOR TEMPORARY &
PERMANENT STRUCTURES
INTRODUCTION
2
Platipus® have over 30 years of experience in the Design,Manufacture and Supply of Percussion Driven Earth AnchoringSolutions (PDEAs) for a wide variety of market sectors. The proof ofour work, engineering skills and diligence speaks for itself in thelarge portfolio of examples and applications shown on our website.
There are steps to the installation of an anchor system:three
DRIVING THE ANCHOR REMOVING THE RODS LOADLOCKING / SETTING
OR
BENEFITS OF THE EARTH ANCHORING SYSTEM
Lightweight alternative to traditional tent pegs / steel pins
Low cost alternative to concrete foundations
Fast and easy installation using simple toolshand-held
Proof tested anchor points in minutes
Local unskilled labour can easily install the systems
!
"
‘SIMPLY’ HOW A MECHANICAL ANCHOR WORKS
3
The S4 / S6 Percussive Driven Earth Anchors (PDEAs) are made from highly corrosion resistantgravity die cast, heat treated alloys.
Designed to be highly durable in strength both during installation and in service. The anchor isconnected to a stainless steel tendon (where applicable) to fully enhance corrosion resistanceparticularly at the soil / air interface.
The stainless steel wedge grip is designed to recess and finish flush to the structure. In manyplaces, where the structure already exists, the option to retrofit the anchors remains a quick andviable solution compared to concrete blocks and wire guys.
The addition of a galvanised eye / shoulder bolt accessory allows its use on larger structures, likewooden school buildings and offices, where concrete foundations are not possible or areinsufficient to meet the potential wind loadings.
We have a unique and well proven solution to securing both wooden and metal frame structures fortemporary and permanent shelter clusters with a choice of three simple anchoring solutions.
Available in different anchor sizes to suit hard or soft groundconditions and capable of providing up to 1000kg / 2240lbs of upliftper anchor point depending upon ground conditions.
The anchors can be installed quickly and effectively in a matter ofminutes using simple hand-held tools provided by us. With simplemodifications the standard anchor solutions can be adapted to suitalmost all shelter / housing designs.
EMERGENCY SHELTERS / HOUSING - Base Mount / Side Mount /Retrofit / Roof Mount
Base Mount Retrofit Side Mount Roof
Base Mount / Retrofit - S2 / S4 / S6 SHELTB Side Mount - S4 / S6 SHELTS Roof Mount - S4 CG1 LEG / S6 CG2 LEG
4
We have four solutions for securing a variety of containers and temporary structures.
The first solution incorporates the use of a pair of anchors, webbing strap and our own tamper proofratchet tensioner.Available in two sizes of anchor and ratchet tensioner (25mm / 16m strap and 35mm /21m strap).
The second solution is designed to be connected underneath the structure, if access allows. Thissolution also incorporates our tamper proof tensioner and is available in two sizes of anchor to suiteither soft or hard ground conditions.
The third solution is also designed to be connected underneath or on the lower part of the structure. Itutilises our S6 cast iron anchor for driving in very hard conditions as well as our larger tamper prooftensioner for loads up to 2000kg / 4480lbs.
The fourth solution is designed solely for holding down ISO containers at their mounting points using ourS8 anchor.
CONTAINERS / TEMPORARY STRUCTURES - Offices, Kitchens& Portable Toilets
HK1S / HK2S S4HK1 / S6HK2
S8HK3WS6HK2C
1
1
2
2
3
3
4
4
5
GENERAL SECURITY - Plastic Mats, Plants & Equipment
Tent pegs and steel pins are heavy, unreliable, expensive toair freight and not always ideal for securing strategicequipment.
We have a range of small lightweight anchors: S2, S4, S6and S8 with standard tendons which can be installed andloadlocked almost instantaneously providing highperformance secure loads subject to ground conditions.
Our small S2 anchor is available in two simple configurations to tie down plastic mats and sheeting.Additionally using our S4 / S6 standard anchors in conjunction with additional wire strop or securitychain and lock as a theft deterrent.
GUYED STRUCTURES - Small & Large Family Tents, Emergency Masts &Antennas, Medical Field Hospitals, Water Storage Tanks, Liners, Covers, ShadeNetting & Vehicle Recovery Points
S2 GEO
S21 / S41 / S61 / S81
S41 + STROP / S61 + STROPS2 ARGS
Soil type
SPT / CPT
Shear angle
Soft Medium Hard
0 - 100kg0 - 200lbs
0 - 300kg0 - 600lbs
0 - 500kg0 - 1000lbs
0 - 1000kg0 - 2000lbs
100 - 200kg200 - 400lbs
300 - 600kg600 - 1200lbs
600 - 1000kg1200 - 2000lbs
500 - 1000kg1000 - 2000lbs
1000 - 2000kg2000 - 4000lbs
1000 - 2000kg2000 - 4000lbs
2000 - 3000kg4000 - 6000lbs
200 - 300kg400 - 600lbs
0 - 30º 30 - 38º 38º+
30+0 - 10 10 - 30
Anchor
Approximate Anchor Capacities
S2
S4
S6
S8
(Lock not included)
Basic equipment and tools are essential in the installation process. Other pieces of equipment makethe general installation procedure easier and quicker. Where multiple anchor installations are requiredwe recommend you consider using powered equipment to install the anchors.
SIMPLE FOR ALL INSTALLATIONSINSTALLATION TOOLS
SJ1
TL1 / TL2 TL1S / TL2S
PH1
PHK
WC4
BOBBIN
HDR (range)
RR1 (PAIR)
RATCHET STENSIONERLOADLOCKINGDRIVE RODSPRODUCT CODE
PHKHDRS2
PH1HDRS2
ROD REMOVERS
PROOF TESTING
Manual EquipmentBy Hand
LOADLOCK THEANCHOR
By Hand or withRod Removers
REMOVE THE RODS
By Hand
DRIVE THE ANCHOR
RR1
RR1
PHK
PHK
TL1S (HK1S)
TL1 (HK)
TL1 / TL2
TL2S (HK2S)
PHK
PH1
PH1
PHK / BOBBIN
PHK / BOBBIN
PH1
HDRS4ED
HDRS6
HDRS6
HDRS6
HDRS6
RR1
RR1
RR1
RR1
RR1
RR1
HDRS4
HDRS6
HDRS4
RR1 SJ1 / KLEINHDRS8
S2 GEO
S2 SHELTB / S2 ARGS
S4 SHELTB / S4 SHELTS
S6 SHELTB / S6 SHELTS
S4 CG1 LEG / S4HK1
S6 CG2 LEG
S41 / HK1S / S41 STROP
S61 / HK2S
S6HK2 / S6HK2C
S81 / S8HK3W
S61 STROP
HS3 SWAGER
6
SPECIALIST APPLICATIONS
7
Key Benefits f he Systemo t
Proven design solutions for buoyancy control of small & large pipelines
Significant cost savings overtime & concrete coating / set on / bolt onweights / bags
Mini al environmental damagem
Proof testing of each anchor upon installation
Application designed webbing for fast installation with damage tonopipes or their coating
Installation before or after the pipe is laid
No specialist installation equipment required
Flexible anchor selection for varying soil conditions
No Cathodic protection required
Antennas & MastsTelecom Poles / Stays
Mobile Satellites
Communication & Electricity Distribution Systems
Photovoltaic SystemsLow cost solution compared toconcrete
Fast easy installation&
Immediate quantifiable loads
Low environmental impact
A 2kg anchor can provide up to 2.5 tonnes of resistance
Bespoke installation equipment & tools
Full training & support
Key Benefits of the System
Buoyancy Control Systems
4kW
PDEA , Percussion Driven Earth Anchor, is a Registered Trademark of Platipus Anchors.®
300615
T: Toll Free (USA): (866) 752-8478 T: (919) 662-0991E: [email protected]
Distributor