Earthing and Lightning Protection

LAMDA ELECTRIC PT. Lamda Teknologi Indonesia

PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]

EARTHING AND LIGHTNING PROTECTION

1

LAMDA ELECTRIC

Earthing and Lightning Protection


Copper Bond Electrode Rod (Threaded) They are made from a low carbon, high tensile strength (600m/mm2 minimum) steel core with a coating

of molecular bonded 99.9% pure electrolytic copper.

The minimum thickness of this coating is 100 micro (0.1 mm), 200 micro (0.2 mm), 250 micro (0.25 mm).

Extensible type rods have a rolled thread (UNC2A at each end).

Rolled threads have a higher strength than cut threads and also preserve the copper coating at the

treads roots.

Special size and copper thickness can be supplied on request.

Part No. Length Rod Dia

mm

Thread Size

ft mm in mm

ERT 1112 4' 1200 11 1/2" 12.5

ERT 1115 5' 1500 11 1/2" 12.5

ERT 1118 6' 1800 11 1/2" 12.5

ERT 1212 4' 1200 12.5 9/16" 14.2

ERT 1215 5' 1500 12.5 9/16" 14.2

ERT 1218 6' 1800 12.5 9/16" 14.2

ERT 1412 4' 1200 14.2 5/8" 15.8

ERT 1415 5' 1500 14.2 5/8" 15.8

ERT 1418 6' 1800 14.2 5/8" 15.8

ERT 1424 8' 2400 14.2 5/8" 15.8

ERT 1430 10' 3000 14.2 5/8" 15.8

ERT 1712 4' 1200 17.2 3/4" 19

ERT 1715 5' 1500 17.2 3/4" 19

ERT 1718 6' 1800 17.2 3/4" 19

ERT 1724 8' 2400 17.2 3/4" 19

ERT 1730 10' 3000 17.2 3/4" 19

2

LAMDA ELECTRIC



Copper Bond Electrode Rod (Un-Threaded)

They are made from a low carbon, high tensile strength (600m/mm2 minimum) steel core with a coating

of molecular bonded 99.9% pure electrolytic copper.

The minimum thickness of this coating is 100 micro (0.1 mm), 200 micro (0.2 mm), 250 micro (0.25 mm).

Special size and copper thickness can be supplied on request.


ft mm in mm

ER 101 4' 1200 1/2" 12.5

ER 102 5' 1500 1/2" 12.5

ER 103 6' 1800 1/2" 12.5

ER 144 4' 1200 9/16" 14

ER 145 5' 1500 9/16" 14

ER 146 6' 1800 9/16" 14

ER 201 4' 1200 5/8" 16

ER 202 5' 1500 5/8" 16

ER 203 6' 1800 5/8" 16

ER 204 8' 2400 5/8" 16

ER 205 10' 3000 5/8" 16

ER 301 4' 1200 3/4" 19

ER 302 5' 1500 3/4" 19

ER 303 6' 1800 3/4" 19

ER 304 8' 2400 3/4" 19

ER 305 10' 3000 3/4" 19

3

LAMDA ELECTRIC



Driving Head

Driving studs are made from high tensile steel with a

socket head cap screw.

Coupling

Couplers are counter bored to completely enclose threads

& protect from damage and corrosion

Driving Tip

Part No. Suitable for Rod Dia

In mm

DH 12 1/2" 12.5

DH 14 9/6" 14

DH 16 5/8" 16

DH 19 3/4" 19

Part No. Length (mm)

Suitable for Rod Dia

in mm

CC 12 60 1/2" 12.5

CC 16 60 9/6" 14

CC 19 70 5/8" 16

CC 14 70 3/4" 19

Part No. Length (mm) Suitable for Rod Dia

in mm

DS 12 60 1/2" 12.5

DS 14 60 9/6" 14

DS 16 70 5/8" 16

DS 19 70 3/4" 19

4

LAMDA ELECTRIC



Solid Copper Grounding Rod

Solid copper earth rod are made from 99.9% pure

electrolytic copper. Solid copper rods offers greater

resistance to corrosion. They are ideally used in applications

where soil condition are very aggressive, for eg. Solid with

high salt content.

Driving Head

Driving Heads are made from hardened and tempered

steel. It is used protect the internal thread and the top of

the earth electrode when being driven into the ground.

Coupling Dowel

Coupling dowels for stainless steel earth rods are made

from stainless steel or brass. It used to join either the solid

copper and stainless steel rods.

Driving Spike

Driving spikes are made from case hardened steel. It is used

to enable the earth. Electrode to be driven into the ground

more easily and stops the earth electrode from being

damage.

Part No. Rod Dia (mm) Length

SCR-512 15 1200 mm or 4'

SCR-515 15 1500 mm or 5'

SCR-520 20 1200 mm or 6'

SCR-521 20 1500 mm or 5'

Part No. Length (mm) Thread Dia (mm) Material

DH 16 40 10 Hardened steel DH 20 42 10

Part No. Length Thread Dia (mm) Material

CD 10 40 10 Stainless steel CD 10 40 10

Part No. Length Thread Dia (mm) Material

DS 10 40 10 Stainless steel DS 10 40 10

5

LAMDA ELECTRIC



Solid Copper Earth Rod

Solid copper earth rod are made from 99.9% pure electrolytic copper.

Solid copper earth rod offers greater resistance to corrosion. They are ideally used in applications where

soil conditions are very aggressive, foreg, soil with high salt content.

Mechanically Claded Earth Rod

Mechanically cladded copper earth rod is made from 99.9% electrolytic grade copper tube with wall

thickness of 0.25 mm (25 micro) is cladded to a low carbon steel rod.


ft mm in mm

CR 101 4' 1200 1/2" 12.5

CR 102 5' 1500 1/2" 12.5

CR 144 4' 1200 9/16" 14

CR 145 5' 1500 9/16" 14

CR 201 4' 1200 5/8" 16

CR 202 5' 1500 5/8" 16

CR 203 6' 1800 5/8" 16


ft mm in mm

ER 101 4' 1200 1/2" 12.5

ER 102 5' 1500 1/2" 12.5

ER 144 4' 1200 9/16" 14.2

ER 145 5' 1500 9/16" 14.2

ER 201 4' 1200 5/8" 16

ER 202 5' 1500 5/8" 16

ER 203 6' 1800 5/8" 16

ER 302 5' 1500 3/4" 19

ER 303 6' 1800 3/4" 19

6

LAMDA ELECTRIC



Rod to Tape Clamp

The clamps are used to join various sizes of conductor tape to

the earth electrode, which have a high resistance to

corrosion and are mechanically strong to ensure a lasting

connection.

Rod to Cable Clamp

The clamps are used to join various sizes of cable to the earth

electrode, which have a high resistance to corrosion and are

mechanically strong to ensure a lasting connection.

Part No. Rod Dia

Max. Conductor in mm

RTC 10 1/2" 12.5 26 x 12 mm2

RTC 10 5/8" 16 26 x 12 mm2

RTC 10 3/4" 19 26 x 10 mm2

RTC 30 5/8" 16 40 x 12 mm2

RTC 40 5/8" 16 51 x 8 mm2

RTC 50 3/4" 19 51 x 12 mm2

RTC 60 1/2" 12.5 26 x 20 mm2

RTC 60 5/8" 16 26 x 18 mm2

RTC 60 3/4" 19 26 x 10 mm2

RTC 60 1" 25 26 x 10 mm2

Part No. Rod Dia

Max. Conductor in mm

RCC 9 3/8" 9.5 6-35 mm2

RCC 12 1/2" 12.5 16-50 mm2

RCC 16 5/8" 16 16-70 mm2

RCC 20 3/4" 19 16-95 mm2

RCC 25 1" 25 70-120 mm2

7

LAMDA ELECTRIC



U-Bolt Rod to tape Clamp (Single Plate)

The clams are used to join various sizes of conductor

tape to earth electrode / rebar.

U-Bolt Rod to tape Clamp (Double Plate)

The clams are used to join 25 x 3 mm conductor tape to

earth electrode / rebar, without the need to drill the

tape.

Part No. Rod Dia

Material in Mm

URC-1-16 5/8" 16

Copper/Brass URC-1-20 3/4" 20

URC-1-25 1 25

Part No. Rod Dia

Material in Mm

URC-2-16 5/8" 16

Copper/Brass URC-2-20 3/4" 20

URC-2-25 1 25

8

LAMDA ELECTRIC



U-Bolt Rod to Cable Clamp

U-Bolt Rod Clamp

Part No. Rod/Pipe Dia No. of

Conductors Conductor Size

(mm2) No. of Copper Tape

in mm

UC 301 5/8"-3/4" 16-19 1 50-95 -

UC 302 5/8"-3/4" 16-19 2 50-70 -

UC 303 5/8"-3/4" 16-19 3 50-70 -

UC 304 5/8"-3/4" 16-19 5 50-70 -

UC 305 5/8"-3/4" 16-19 3 70-120 -

UC 306 5/8"-3/4" 16-19 2 50-70 -

UC 307 5/8"-3/4" 16-19 1 70-120 -

UC 308 5/8"-3/4" 16-19 - - 1 or 2

UC 309 - 30 - - 1 or 2

UC 310 - 40 - - 1

Part No. Rod Dia

(mm) Conductor

(mm2) Material

URCC 16 14.2-17.2 16-70 Copper/Brass

URCC 70 18-25 70-185

9

LAMDA ELECTRIC



Tape Clip

These Metal Clip Hold the Tape Flush to the Surface

and Fixed Using Two Screws

Tape Clip

DC Tape Clamp

DC Tape Clamp

Part No. Conductor Size

(mm) Material

TCC 203 20 x 3 Copper/Brass

TCC 253 25 x 3


(mm) Material

TCA 203 20 x 3 Aluminium

TCA 253 25 x 3

Part No. Tape Size (mm) Material

ADC 203 20 x 3

Aluminium ADC 253 25 x 3

ADC 256 25 x 6

ADC 506 50 x 6

Part No. Conductor (mm) Material

CDC 203 20 x 3

Copper/Brass

CDC 253 25 x 3

CDC 256 25 x 6

CDC 503 50 x 3

CDC 504 50 x 4

CDC 506 50 x 6

10

LAMDA ELECTRIC



Square Tape Clamp

Square clamps are made form cooper and aluminium,

it is used for four ways connection and suitable for

crossing over taps, straight through joints or t

connections to from a continuous network of tapes.

Square Conductor Clamp

Square clamps for copper and aluminium circular

conductor used for a four ways connection and

suitable for crossing over taps, straight through joints

or t connections to from a continuous network of

tapes.


(mm2) Material

ASC 253 25 x 3 Aluminium

CSC 253 25 x 3

Copper/Brass CSC 256 25 x 6

CSC 506 50 x 6


(mm2) Material

SCC 50 50

Copper SCC 50 70

SCC 50 95

11

LAMDA ELECTRIC



Bi-Metallic Connector


(mm2) Material

BMC 253 B 25 x 3 Aluminium Tape to

25 x 3 Copper Tape

Bimetal Clamps are used to connect Aluminium conductor to Copper Earth Conductor

Adhesive Base DC Clip


(mm2) Material

BMC 253 A 25 x 3 Aluminium Tape to

25 x 3 Copper Tape

Part No. Conductor Dia

(mm) Conductor Type

OH 8 C 8 Copper

OH 8 A 8 Aluminium

OH 10 C 8 Copper pvc covered

OH 10 A 8 Aluminium pvc covered

12

LAMDA ELECTRIC



C-Copper Clamp

Material : 99.9% Pure coppen Surface : Tin Plating on request

Split Bolted Connector

Material : Brass Surface : Tin Plated or Copper Plated on request. It is used to branch or connect aerial hard copper conductor or insulated copper conductor.

Part No.

Conductor (mm

2)

Dimensions (mm) Note

H B L C

CCA-1 25-35 25 15 22 10 Can be produced

according to customer's

drawing

CCA-2 50-70 34 21.5 25 11

CCA-3 95-95 41 25 29 14.5

CCA-4 120-120 47.5 29 30 16

Part No. Conductor

(mm2)

Dimensions (mm)

H A B L C T

CCT-10 7.5-14 9.5 6.3 6.2 12 4 1.6

CCT-16 14.5-16 11.8 7.8 7.8 13 5 2

CCT-20 16.5-20 12.8 8.6 9.7 13 5.4 2.9

CCT-26 21-26 14.7 10.2 10 16 6.5 3.2

CCT-44 27-44 19 13.4 14.4 20 8.5 4

CCT-60 45-60 21 15.4 15.4 22 9.7 4

CCT-76 61-75 24.4 17.3 17.6 22 10.8 5

CCT-98 77-98 27.8 20.8 18.8 25 12.8 5

CCT-122 99-122 29.8 22.1 21.2 26 13.5 5.5

CCT-154 123-154 34 25.7 24.4 28 17 6

CCT-190 155-190 37 28.5 25.4 35 17.4 6

CCT-240 191-240 40 30.2 28.5 40 19 7

Part No. Applicable Conductor

(mm2)

Dimensions (mm) Weight (kg) L M H S

T/J-16 16 26 10 x 1 5.3 13.9 0.023

T/J-25 25 29 14 x 1.5 7 18.5 0.034

T/J-35 35 34 18 x 1.5 8 20.8 0.057

T/J-50-70 50-70 42 24 x 2 12 27.7 0.108

T/J-90-120 90-120 50 24 x 2 14.5 30 0.142

T/J-150-185 150-180 63 24 x 2 18 34.6 0.250

T/J-200-240 200-240 72 31 x 2.5 20 32 0.301

13

LAMDA ELECTRIC



B Bond

Bond connections are used to bond either Copper of Aluminium to flat metal surfaces.

Pipe Bond

Pipe bond connections are used to connect flat conductor objects i.e. Pipe work and hand rails etc.

Rod to Cable Lug Clamp

Rod to cable lug clamps are used to join various sizes of compression lugs to the earth electrode.

Part No. Conductor

(mm) Material

BBC 25 x 3 Copper/Brass

BBA 25 x 3 Aluminium

Part No. Conductor

(mm) Material

PBC 25 x 3 Copper/Brass

PBA 25 x 3 Aluminium

Part No. Rod Dia

Material in mm

CLUG 10 3/8" 9.5

Copper/Brass CLUG 16 5/8" 16

CLUG 20 S - 20

14

LAMDA ELECTRIC



Tee Clamp

Tee clamps for copper and aluminium circular conductor, the clamps are used for three ways connection.

Flat to Circular Square Clamp

Square clamps for copper tape to circular conductor, the base has a countersunk hole in the middle for fixing the clamp.

Test ClampCable

Test clamps are manufactured from copper, it used to form a disconnecting joint between the down conductor system and the earthing system.


(mm) Material

TC 08 8 Copper/Brass

TA 08 8 Aluminium

Part No. Tape Size

(mm) Conductor Rang

(mm/mm2) Material

SCC 25350 25 x 3 50

Copper/Brass SCC 25370 25 x 3 70

SCC 25395 31 x 3 95

Part No. Conductor Dia (mm) Material

TC 50 50

Copper/Brass TC 70 70

TC 95 95

15

LAMDA ELECTRIC



Oblong Test Clamp

Oblong Test Clamps are used to join conductor tape to facilitate in the annual testing of the lightning protection system.

Copper Test Clamp

Copper test clamp are used to form a disconnecting joint between either conductor (8 mm + 0.8 mm dia) or 25 x 3 m conductor.

Earth Bonding Point

Earth bond points are used to provide earthing continuity and a multi-bonding point. The bonding points are available with 2 or 4 holes connections and cover plate.


OTCA 253 25 x 3 Aluminium

OTCC 253 25 x 3

Copper/Brass OTCC 316 31 x 6

OTCA 405 40 x 5


(mm) Conductor Size

(mm) Material

CTC 08 8 25 x 3 Copper/Brass

Part No. Length (mm)

Material

EBP 2 500

Gunmetal casting with 70 mm2 pvc copper cable

EBP 4 500

EBP 2P 500

EBP 2P-08 500

16

LAMDA ELECTRIC



Screw Down Test Clamp

Screw down test clamp are used to join 25 x 3 mm conductor tape to facilitate in the annual testing of the lightning protection system.

Plate Test Clamp

Plate type test clamps, made of brass or aluminium, which can be used as to joints or straight through joints of tapes being joints, these can also effectively be used as testing points for the network. By disconnecting the joints, plate test clamp can also be used for heavy duty up to 50 x 6 tape connections.


STDC 253 25 x 3 Copper/Brass


PTC 253 25 x 3 Gunmetal

17

LAMDA ELECTRIC



Air Rod

The air rods made from Electrocytic Grade Copper, one side tapper pointed and the other side with suitable threads for fixing to saddles /air terminal bases. Rods made from also can be supplied against specific requirements. Rods can be installed with or without multiple points. However, researches conducted in this regards suggest use or multiple points with taper pointed air rods are more effective than taper pointed air rods.

Air Rods Base

Copper and Aluminium Air Rod Base are used for supporting taper pointed or air Rods with tapes, four fixing holes are provided on it.

Part No. Rod Length

(mm) Rod Dia

(mm) Thread Dia

(mm) Material

CAR 0515 500 15 16

Copper CAR 1015 1000 15 16

CAR 1515 1500 15 16

CAR 2015 2000 15 16

TAR 515 T 500 15 16

Tinned Copper TAR 1515 T 1000 15 16

TAR 2015 T 1500 15 16

TAR 051 T 2000 15 16

AAR 0515 A 500 15 16

Aluminium AAR 1015 A 1000 15 16

AAR 1515 A 1500 15 16

AAR 2015 A 2000 15 16

AAR 0510 500 10 10 Copper

AAR 1010 1000 10 10

AAR 0510 A 500 10 10 Aluminium

AAR 1010 A 1000 10 10

Part No. Rod Dia

(mm) Thread Dia

(mm)

Max. Conductor

width (mm) Material

DC 312 12 12 25 Copper/Brass

DC 515 15 16 25

DA 312 12 12 25 Aluminium

DA 515 15 16 25

18

LAMDA ELECTRIC



Air Termination

Tapper pointed air rods ate made from copper/base. One side tapper pointed and the other side with suitable for fixing to saddles/air terminal bases. Rods made of aluminium alco can be supplied against specific requirements. Rod can be use of multiple points with taper points with taper pointed air rods are more effective than taper pointed air rods.

Part No. Rod Length

(mm) Rod Dia

(mm) Thread Dia

(mm) Material

ATC 3142 300 14.2 5/8"

Copper/Brass ATC 5142 500 14.2 5/8"

ATC 10142 1000 14.2 5/8"

ATC 20142 2000 14.2 5/8"

ATC 31558-16 300 15 5/8' or 16 mm

Copper/Brass

ATC 51558-16 500 15 5/8' or 16 mm

ATC 101558-16 1000 15 5/8' or 16 mm

ATC 201558-16 2000 15 5/8' or 16 mm

ATC 31658-16 300 16 5/8' or 16 mm

ATC 51658-16 500 16 5/8' or 16 mm

ATC 101658-16 1000 16 5/8' or 16 mm

ATC 201658-16 2000 16 3/4'

ATC 5172 500 17.2 3/4'

Copper/Brass ATC 10172 1000 17.2 3/4'

ATC 20172 2000 17.2 5/8'

ATA 3142 300 14.2 5/8'

Aluminium

ATA 5142 500 14.2 5/8'

ATA 10142 1000 14.2 5/8'

ATA 15142 1500 14.2 5/8'

ATA 20142 2000 14.2 5/8' or 16 mm

ATA 31558-16 300 15 5/8' or 16 mm

Aluminium

ATA 51558-16 500 15 5/8' or 16 mm

ATA 101558-16 1000 15 5/8' or 16 mm

ATA 151558-16 1500 15 5/8' or 16 mm

ATA 201558-16 2000 15 5/8' or 16 mm

ATA 31658-16 300 16 5/8' or 16 mm

Aluminium

ATA 51658-16 500 16 5/8' or 16 mm

ATA 101658-16 1000 16 5/8' or 16 mm

ATA 151658-16 1500 16 5/8' or 16 mm

ATA 201658-16 2000 16 3/4'

ATA 5172 500 17.2 3/4'

Aluminium ATA 10172 1000 17.2 3/4'

ATA 20172 2000 17.2

19

LAMDA ELECTRIC



Air Termination

Part No. Dimensions (mm)

H H1 H2 H3 D

ATC 01-A 380 250 130 90 100

ATC 01-B 550 420 130 140 100

ATC 01-C 1000 870 130 300 100


H H1 H2 H3 D

ATC 02-A 380 250 130 90 100

ATC 02-B 550 420 130 140 100

ATC 02-C 1000 870 130 300 100


H H1 H2 H3

ATC 03-A 750 400 250 100 100


H H1 H2 H3 1 2

ATC 03-B 1500 250 200 700 150 200

20

LAMDA ELECTRIC



Earth Plate Solid Copper

Solid copper earth plates are used as part of earthing network, which provide a log lasting solution where earth rods are unsuitable and also used as an electrode where significant amounts of fault current can be encountered.

Earth Mat Copper Tape

The Copper Earth Mat are used where step potential could cause problems, which provide a long lasting earthing solution and used as an electrode where significant amounts of fault current can be encountered. Solid copper plate arrangement Lattice copper mat arrangement

Part No. Size (mm) Material

SCEP 615 600 x 600 x 1.5

Copper SCEP 630 600 x 600 x 3

SCEP 915 900 x 900 x 1.5

SCEP 930 900 x 900 x 3

Part No. Size (mm) Material

LCEM 630 600 x 600 x 3 High conductivity copper

LCEM 930 900 x 900 x 3

21

LAMDA ELECTRIC



Rod To Tape Coupling

Rod To Tape Couplers are made from copper and used in conjunction with Side Mounted Brackets.

Air Rod Bracket

Air Rod Brackets are to be installed to the side of the building were it is not possible to fit a conventional air terminal base. The brackets are to be used in conjunction with the rod to tape coupling.

Puddle Flanges

Made from copper or Aluminium, used where the roof termination or down conductors have to pass through water proof couering, roff, etc.


(mm) Conductor Size

(mm) Material

RBCC 16 16 25 x 3 Copper/Brass


(mm) Conductor Size

(mm) Material

APK 15 15 16 Copper

APK 15 A 15 16 Aluminium

APK 15 T 15 16 Tinned Copper

Part No. Dimension (mm) Material

PFC 150 x 150 x 600 Copper

PFA 150 x 150 x 600 Aluminium

22

LAMDA ELECTRIC



Compression Clamp

Inspection Pit

These are suitable for most types of earthing & lightning protection installations. Not suitable for use in areas where high load, small wheel vehicles are used.

Product Introduction

Part No. Diameter of lamp Height of Lamp Length of screw Material

IP 5 160 mm 185 mm 200 mm M16

The obstruction lamp is a product applied by the communication base stations up to date since a long time ago. It is based on DC or AC power as its power supply system with the light emitting tube as its light source. Its outside case is made of polycarbonate and engineering plastic materials, controlled with the light sensitive resistance. It flashes by itself at the night time and turns off automatically at the day time.

Part No. Suitable Conductor (mm2)

BC-119-50 50-70

BC-119-70 70-95

BC-119-95 95-120

Part No. Overall (mm) Description Material

IP 5 300 x 25 x 6 5 Hole pit bar Hard drawn copper bar IP 7 300 x 25 x 6 7 Hole pit bar

23

LAMDA ELECTRIC



Earth Bars

Other sizes request

Earth Bars Insulators

Electrical : Dielectric Strength : > 14 kV/mm Resistance (normal) : > 10 M Ohms Resistance (bolted) : > 10 M Ohms Arc resistance : > 180 secretary Tracking Index : > 600 Inserts: Brass M6 9 Nm Torque (Torque can depend M8 18 Nm Torque on the Standoff M10 35 Nm Torque diameter)

Part No. Dimension (mm2) Material

EBAR 6 300 x 90 x 90 6 ways earth bar disconnect link













Part No. Size (mm) Description

SM 10 M 10 x 35 Insulator stand off type c/w 2 studs & 3 nuts

SM 20 M 5 x 20 Insulator stand off type









24

LAMDA ELECTRIC



Copper Tape

Part No. Dimension (mm2) Stand No. / Diameter

(mm2) Remark

CT 203 20 x 3 60

Material : Oxygen-free copper

CT 254 25 x 4 100

CT 304 30 x 4 120

CT 305 30 x 5 150

CT 404 40 x 4 160

CT 405 40 x 5 200

CT 505 50 x 5 250

CT 506 50 x 6 300

Bi-metal Earth Conductor

Part No. Diameter (mm) Length (m) Remark

SBCT 08 8 6

SBCT 10 10 6 Thickness of copper layer 0.5 mm Copper/steel SBCT 12 12 6

SBCT 14 14 6

Flat Bi-metal Tape

Part No. Dimensions

(mm) Stand No. / dia (m) Remark

FBT 50 6 X 14 6

FBT 070 6 X 20 6

FBT 095 7 X 22 6

FBT 120 7 X 27 6 Thickness of copper layer 0.5 mm Copper/steel FBT 160 7 X 32 6

FBT 180 7 X 37 6

FBT 210 8 X 37 6

25

LAMDA ELECTRIC



Bi-metal Earthing Conductor Barel (Cu/Steel) Bimetallic cable / Y/G PVC insulated (Cu/Steel) Bimetallic cableGalvanized technics.

Part No. Conductor Section

(mm2) Conductor Dia

(mm) Weight / M

(kgs) Remark

BC 16/IBC 16 16 7/1.70 0.126/0.156

BC 25/IBC 25 25 7/2.14 0.193/0.228

BC 35/IBC 35 35 7/2.50 0.273/0.323

BC 50/IBC 50 50 7/3.00 0.384/0.444 General packing : 100 meters BC 50/IBC 50 50 19/1.80 0.384/0.444

BC 70/IBC 70 70 19/2.10 0.523/0.603 Voltage of Insulator : 450/750V BC 95/IBC 95 95 19/2.50 0.742/0.842

BC 120/IBC 120 120 37/2.03 0.930/1.050

BC 150/IBC 150 150 37/2.30 1.02/1.17

BC 185/IBC 185 185 37/2.50 1.446/1.63

Copper Earth Conductor Bare copper stranded cables / Y / G PVC insulated copper cables.

Part No. Conductor Section

(mm2)

Conductor Dia (mm)

Weight / M (kgs)

Remark

CC 16/ICC 16 16 7/1.68 0.14/0.17

Cc 25/ICC 25 25 7/2.11 0.22/0.255

Cc 35/ICC 35 35 7/2.49 0.306/0.356

Cc 50/ICC50 50 7/2.97 0.438/0.498 Material : Oxygen-

Cc 70/ICC 70 70 19/2.14 0.618/0.698 free copper

Cc 95/ICC 95 95 19/2.49 0.838/0.938 tinned conductor

Cc 120/ICC 120 120 19/2.80 1.057/1.177 on request

Cc 150/ICC 150 150 37/2.25 1.34/1.49

Cc 185/ICC 185 185 37/2.49 1.65/1.834

Cc 240/ICC 240 240 37/2.84 2.14/2.371

Cc 300/ICC 300 300 61/2.49 3.564/2.854

26

LAMDA ELECTRIC



Copper Braid Wire The copper braided wire is used as flexible jointing wire of electric appliance, switch appliance, electric stove and storage battery etc. Model and Meaning Technique Performance Copper braided wire adopts super quality round copper wire or tinning soft round copper wire to be braided in multiple thread one layer or many layers. The DC electrical resistivity (20oC) of copper braided wire is lower than 0.022 .mm2/m, the DC electrical resistivity (200C) of tinning copper braided wire is lower than 0.234 .mm2/m.

CBW20 and CBWX 20

Section (mm2) Number of skeins x

threads/diameter of a single thread (mm)

Size (mm)

20 Direct Current reistance /km no

more than Calculating

weight (kg/km)

Standard Calculating The width no more

than

Thickness for

reference CBW-20 CBWX-20

16 16.59 24 x 22 x1/0.20 16 3.0 1.30 1.36 166

25 24.88 24 x 33 x1/0.20 18 3.5 0.87 0.91 249

35 33.18 24 x 44 x1/0.20 20 4.0 0.65 0.68 331

50 49.77 24 x 33 x2/0.20 22 5.0 0.43 0.45 198

70 66.36 24 x 44 x2/0.20 24 6.5 0.32 0.33 664

95 90.49 24 x 40 x3/0.20 20 - 0.24 0.25 905

120 120.55 24 x 40 x4/0.20 22 - 0.18 0.19 1207

150 150.82 24 x 40 x 5/0.20 24 - 0.14 0.15 1508

185 180.98 24 x 40 x 6/0.20 26 - 0.12 0.13 1810

240 241.31 24 x 40 x 8/0.20 30 - 0.089 0.093 2413

300 301.63 24 x 40 x 10/0.20 35 - 0.071 0.075 3016

400 401.17 24 x 40 x 10/0.20 + 36 x 44 x 2/0.20 40 - 0.054 0.056 4004

500 500.65 24 x 40 x 10/0.20 + 48 x 44 x 3/0.20 45 - 0.043 0.045 5007

630 633.43 24 x 40 x 10/0.20 + 48 x 44 x 5/0.20 50 - 0.034 0.036 6334

27

LAMDA ELECTRIC



Copper Braided Shunt

These connectors manufactured from highly flexible, which are braided from annealed Cu. The best alternative to cable, no cutting, no crimping, flexible, pre-punched, ready to use, quick and easy to install. Solidified pressed contact areas Ametal Alloyed Leadfree Solder Solidified Contact Areas Technical data Braids : 0.20 mm annealed Cu-ETP wires, uncoated or tinned Insulation : Special vinyl compound Max. working temperature 1050C Self extinguishable: UL 94 VO Dielectric strength : 20 kV/mm Max. working voltage : 1000V AC 1500 V DC

28

LAMDA ELECTRIC



Part No. Cross secretary

(mm2)

Dimensions

Red Copper Tinned Copper L

mm L1

mm L2

mm L3

mm L4

mm L5

mm W

mm T

mm K

mm G

mm D1

mm D2

mm

BS 025- 230- 10-8 BST 025- 230- 10-8 25 230 25 25 11 7 248 20 3.2 7 23 10 8.5

BS 025- 330- 10-8 BST 025- 330- 10-8 25 330 25 25 11 7 348 20 3.2 7 23 10 8.5

BS 025- 430- 10-8 BST 025- 430- 10-8 25 430 25 25 11 7 448 20 3.2 7 23 10.5 8.5

BS 025- 530- 10-8 BST 025- 530- 10-8 25 530 25 25 11 7 548 20 3.2 7 23 10.5 8.5

BS 025- 630- 10-8 BST 025- 630- 10-8 25 630 25 25 11 7 648 20 3.2 7 23 10.5 8.5

BS 025- 230- 10-8 BST 025- 230- 10-8 25 230 25 25 11 7 248 20 4.2 7 23 10.5 8.5

BS 035- 330- 10-8 BST 035- 330- 10-8 35 330 25 25 11 7 348 20 4.2 7 23 10.5 8.5

BS 035- 430- 10-8 BST 035- 430- 10-8 35 430 25 25 11 7 448 20 4.2 7 23 10.5 8.5

BS 035- 530- 10-8 BST 035- 530- 10-8 35 530 25 25 11 7 548 20 4.2 7 23 10.5 8.5

BS 035- 630- 10-8 BST 035- 630- 10-8 35 630 25 25 11 7 648 20 4.2 7 23 10.5 8.5

BS 035- 230- 10-8 BST 035- 230- 10-8 35 230 25 25 11 7 252 20 5 7.5 23 10.5 8.5

BS 050- 330- 10-8 BST 050- 330- 10-8 50 330 25 25 11 7 352 20 5 7.5 23 10.5 8.5

BS 050- 430- 10-8 BST 050- 430- 10-8 50 430 25 25 11 7 452 20 5 7.5 23 10.5 8.5

BS 050- 530- 10-8 BST 050- 530- 10-8 50 530 25 25 11 7 552 20 5 7.5 23 10.5 8.5

BS 050- 630- 10-8 BST 050- 630- 10-8 50 630 25 25 11 11 652 20 5 7.5 23 10.5 10.5

BS 050- 230- 10-8 BST 050- 230- 10-8 50 230 25 25 11 11 252 20 6.8 8.5 23 10.5 10.5

BS 070- 330- 10-10 BST 070- 330- 10-10 70 330 25 25 11 11 352 20 6.8 8.5 23 10.5 10.5

BS 070- 430- 10-10 BST 070- 430- 10-10 70 430 25 25 11 11 452 20 6.8 8.5 23 10.5 10.5

BS 070- 530- 10-10 BST 070- 530- 10-10 70 530 25 25 11 11 552 20 6.8 8.5 23 10.5 10.5

BS 070- 630- 10-10 BST 070- 630- 10-10 70 630 25 25 11 11 652 20 6.8 8.5 23 10.5 10.5

BS 070- 230- 10-10 BST 070- 230- 10-10 70 230 25 25 11 11 252 25 7.5 8.5 28 10.5 10.5

BS 095- 330- 10-10 BST 095- 330- 10-10 95 330 25 25 11 11 352 25 7.5 8.5 28 10.5 10.5

BS 095- 430- 10-10 BST 095- 430- 10-10 95 430 25 25 11 11 452 25 7.5 8.5 28 10.5 10.5

BS 095- 530- 10-10 BST 095- 530- 10-10 95 530 25 25 11 11 552 25 7.5 8.5 28 10.5 10.5

BS 095- 630- 10-10 BST 095- 630- 10-10 95 630 25 25 11 11 652 25 7.5 8.5 28 10.5 10.5

BS 120- 330- 10-10 BST 120- 330- 10-10 120 330 30 30 11 14 355 30 7.5 12.5 28 10.5 10.5

BS 120- 430- 10-10 BST 120- 430- 10-10 120 430 30 30 11 14 455 30 7.5 12.5 28 10.5 10.5

BS 120- 530- 10-10 BST 120- 530- 10-10 120 530 30 30 11 14 555 30 7.5 12.5 28 10.5 10.5 BS 120- 630- 10-10 BST 120- 630- 10-10 120 630 30 30 11 14 655 30 7.5 12.5 28 10.5 10.5

BS 120- 730- 10-10 BST 120- 730- 10-10 120 730 30 30 11 14 755 30 7.5 12.5 28 10.5 10.5

BS 120- 830- 10-10 BST 120- 830- 10-10 120 830 30 30 11 14 855 30 7.5 12.5 28 10.5 10.5

BS 150- 330- 10-12 BST 150- 330- 10-12 150 330 30 30 14 14 355 30 10 15 34 12.5 12.5

BS 150- 430- 10-12 BST 150- 430- 10-12 150 430 30 30 14 14 455 30 10 15 34 12.5 12.5

BS 150- 530- 10-12 BST 150- 530- 10-12 150 530 30 30 14 14 555 30 10 15 34 12.5 12.5

BS 150- 630- 10-12 BST 150- 630- 10-12 150 630 30 30 14 14 655 30 10 15 34 12.5 12.5

BS 150- 730- 10-12 BST 150- 730- 10-12 150 730 30 30 14 14 755 30 10 15 34 12.5 12.5

BS 150- 830- 10-12 BST 150- 830- 10-12 150 830 30 30 14 14 855 30 10 15 34 12.5 12.5

BS 185- 330- 10-12 BST 185- 330- 10-12 185 330 30 30 14 14 355 30 11 15 34 12.5 12.5

BS 185- 430- 10-12 BST 185- 430- 10-12 185 430 30 30 14 14 455 30 11 15 34 12.5 12.5

BS 185- 530- 10-12 BST 185- 530- 10-12 185 530 30 30 14 14 555 30 11 15 34 12.5 12.5

BS 185- 630- 10-12 BST 185- 630- 10-12 185 630 30 30 14 14 655 30 11 15 34 12.5 12.5

BS 185- 730- 10-12 BST 185- 730- 10-12 185 730 30 30 14 14 755 30 11 15 34 12.5 12.5

BS 185- 830- 10-12 BST 185- 830- 10-12 185 830 30 30 14 14 855 30 11 15 34 12.5 12.5

BS 240- 330- 10-12 BST 240- 330- 10-12 240 330 30 30 14 14 355 30 13 17 34 12.5 12.5

BS 240- 430- 10-12 BST 240- 430- 10-12 240 430 30 30 14 14 455 30 13 17 34 12.5 12.5

BS 240- 530- 10-12 BST 240- 530- 10-12 240 530 30 30 14 14 555 30 13 17 34 12.5 12.5

BS 240- 630- 10-12 BST 240- 630- 10-12 240 630 30 30 14 14 655 30 13 17 34 12.5 12.5

BS 240- 730- 10-12 BST 240- 730- 10-12 240 730 30 30 14 14 755 30 13 17 34 12.5 12.5

BS 240- 830- 10-12 BST 240- 830- 10-12 240 830 30 30 14 14 855 30 13 17 34 12.5 12.5

29

LAMDA ELECTRIC



Grounding Braid

Earthing Tapes With Solder Pressed Contact Areas

Earthing Tapes With Ametal Alloyed Leadfree Solder Solidified Contact Areas

Part No. Tinned Copper Section (mm2)

Wire Diameter

Dimensions

A mm

B mm

C mm

D mm

S mm

L mm

TZ 6 - 75/010/07 TZX 6 - 75/010/07 6 0.10 13 11 5 7 2.0 75

TZ 6 - 100/010/07 TZX 6 - 100/010/07 6 0.10 13 11 5 7 2.0 100

TZ 6 - 150/010/07 TZX 6 - 150/010/07 6 0.10 13 11 5 7 2.0 150

TZ 6 - 200/010/07 TZX 6 - 200/010/07 6 0.10 13 11 5 7 2.0 200

TZ 10 - 100/020/09 TZX 10 - 100/020/09 10 0.15 23 17 10 9 2.0 100

TZ 10 - 150/020/09 TZX 10 - 150/020/09 10 0.15 23 17 10 9 2.0 150

TZ 10 - 200/020/09 TZX 10 - 200/020/09 10 0.15 23 17 10 9 2.0 200

TZ 10 - 250/020/09 TZX 10 - 250/020/09 10 0.15 23 17 10 9 2.0 250

TZ 10 - 300/020/09 TZX 10 - 300/020/09 10 0.15 23 17 10 9 2.0 300

TZ 16 - 100/020/09 TZX 16 - 100/020/09 16 0.20 23 17 10 9 2.5 100

TZ 16 - 200/020/09 TZX 16 - 200/020/09 16 0.20 23 17 10 9 2.5 200

TZ 16 - 250/020/09 TZX 16 - 250/020/09 16 0.20 23 17 10 9 2.5 250

TZ 16 - 300/020/09 TZX 16 - 300/020/09 16 0.20 23 17 10 9 2.5 300

TZ 16 - 350/020/09 TZX 16- 350/020/09 16 0.20 23 23 10 9 2.5 350

TZ 16 - 400/020/09 TZX 16 - 400/020/09 16 0.20 23 23 10 9 2.5 400

TZ 25 - 100/020/09 TZX 25 - 100/020/09 25 0.20 23 17 10 9 3.2 100

TZ 25 - 200/020/09 TZX 25 - 200/020/09 25 0.20 23 17 10 9 3.2 200

TZ 25 - 300/020/09 TZX 25 - 300/020/09 25 0.20 23 17 10 9 3.2 300

TZ 25 - 400/020/09 TZX 25 - 400/020/09 25 0.20 23 17 10 9 3.2 400

TZ 35 - 100/020/09 TZX 35 - 100/020/09 35 0.20 23 23 10 9 3.4 100

TZ 35 - 200/020/09 TZX 35 - 200/020/09 35 0.20 23 23 10 9 3.4 200

TZ 35 - 300/020/09 TZX 35 - 300/020/09 35 0.20 23 23 10 9 3.4 300

TZ 35 - 400/020/09 TZX 35 - 400/020/09 35 0.20 23 23 10 9 3.4 400

TZ 50 - 100/020/11 TZX 50 - 100/020/11 50 0.20 30 23 10 9 4.5 100

TZ 50 - 200/020/11 TZX 50 - 200/020/11 50 0.20 30 30 15 11 4.5 200

TZ 50 - 300/020/11 TZX 50 - 300/020/11 50 0.20 30 30 15 11 4.5 300

TZ 50 - 400/020/11 TZX 50 - 400/020/11 50 0.20 30 30 15 11 4.5 400

TZ 75 - 200/020/11 TZX 75 - 200/020/11 75 0.20 30 30 15 11 5.0 200

TZ 75 - 300/020/11 TZX 75 - 300/020/11 75 0.20 30 35 15 11 5.0 300

TZ 75 - 400/020/11 TZX 75 - 400/020/11 75 0.20 30 35 15 11 5.0 400

TZ 95 - 200/020/13 TZX 95 - 200/020/13 100 0.20 35 35 15 13 6.0 200

TZ 95 - 250/020/13 TZX 95 - 250/020/13 100 0.20 35 35 15 13 6.0 250

TZ 95 - 400/020/13 TZX 95 - 400/020/13 100 0.20 35 35 15 13 6.0 400

TZ 95 - 400/020/13 TZX 95 - 400/020/13 100 0.20 35 35 15 13 6.0 700

30

LAMDA ELECTRIC



Round Flexible Copper Wire

Standard Section (mm2)

Calculating Section (mm2)

Size (mm) Calculating

external diameter

(mm)

20 Direct Current reistance /km no

more than Calculating weight (kg/km)

Total

Number of skeins x threads/diameter of a single thread

(mm)

CBW-20 CBWX-20

1.5 1.57 408 12 x 34/0.07 1.97 11.70 12.6 14.8

2.5 2.49 646 19 x 34/0.07 2.35 7.41 7.96 23.7

4 4.03 513 19 x 27/0.10 3.08 4.58 4.79 38.3

6. 3 6.27 798 19 x 42/0.10 3.73 2.94 3.07 59.6

10 10.00 1273 19 x 67/0.10 4.73 1.85 1.93 95.1

16 15.83 2016 12 x 7 x 24/0.10 7.18 1.15 1.21 150

25 25.07 3192 19 x 7 x 24/0.10 8.55 0.736 0.769 238

(35) 34.47 4389 19 x 7 x 33/0.10 9.90 0.535 0.559 328

40 39.96 2261 19 x 7 x 17/0.15 11.03 0.462 0.483 380

(50) 49.36 2793 19 x 7 x 21/0.15 12.15 0.374 0.391 470

63 63.46 3591 19 x 7 x 27/0.15 13.50 0.291 0.304 604

(70) 70.51 3990 19 x 7 x 30/0.15 14.18 0.252 0.274 671

80 79.91 4522 19 x 7 x 34/0.15 15.08 0.231 0.241 760

(95) 94.01 5320 19 x 7 x 40/0.15 16.43 0.195 0.205 894

100 10.73 5700 19 x 7 x 25/0.15 18.27 0.183 0.191 958

(120) 120.87 6840 19 x 7 x 30/0.15 20.24 0.153 0.160 1150

125 127.59 7220 19 x 19 x 20/0.15 20.29 0.145 0.152 1214

160 159.49 9025 19 x 19 x 25/0.15 21.75 0.116 0.121 1517

(185) 185.00 10469 19 x 19 x 29/0.15 23.25 0.0997 0.104 1760

200 196.15 11100 37 x 12 x 25/0.15 25.58 0.0940 0.0982 1866

250 251.08 41208 37 x 12 x 32/0.15 28.57 0.0735 0.0768 2388

315 310.58 17575 37 x 19 x 25/0.15 30.45 0.0594 0.0621 2954

400 397.54 22496 37 x 19 x 32/0.15 34.13 0.0464 0.0485 3782

500 496.92 28120 37 x 19 x 40/0.15 38.06 0.0371 0.0388 4727

31

LAMDA ELECTRIC



Brailed Flexible Connector Pressed copper connectors, tin coated on request. Single wire diameter : 0.20 standard 0.10 on request

Red copper Tinned copper

Section (mm)

A (mm)

B (mm)

S (mm)

L (mm)

Holes D Terminal Drill

Current flow

CRS 100 CSS 100 100 40 40 5 200 13 W1 480

CRS 150 CSS 150 150 40 40 7 250 13 W1 590

CRS 200 CSS 200 200 50 50 7 350 13 W1 760

CRS 250 CSS 250 250 50 50 9 350 13 W1 910

CRS 300 CSS 300 300 100 50 10 400 13 W2 950

CRS 400 CSS 400 400 100 50 12 400 13 W2 1020

CRS 500 CSS 500 500 100 50 16 400 13 W2 1300

CRS 600 CSS 600 600 100 60 16 400 13 W2 1500

CRS 800 CSS 800 800 80 80 16 400 13 W4 1700

CRS 1000 CSS 1000 1000 100 100 17 450 13 W5 1900

CRS 1200 CSS 1200 1200 120 120 17 450 13 W7 2150

CRS 1500 CSS 1500 1500 On request

CRS 2000 CSS 2000 2000

Widths, lengths, cross-sections and bores are not included in table above, they are provided at request. An information concerning current flow is not binding, the values. Shown above are approximate values.

Standard drillings

32

LAMDA ELECTRIC



Flexible Insulated Bars Flexible insulated bars are made of high Flexibility laminated copper layers, coated with black coloured, selfextinguishable insulating PUV compound.

Technical Characteristic Laminated Copper Strips Electrolytic copper annealed Cu ETP (state): 99.9% Cu.

Resistivity : 1.78 cm2 / cm

Vickers hardness : < 50 HV

Maximum tensile strength > 200/MM2

Elongation > 30%

Dimensions (mm)

Section (mm)

Current-load Dimensions

(mm) Section (mm)

Current-load

t 20C t 40C t 50C t 20C t 40C t 50C

15.5 x 0.8 x 2 24.8 125 175 200 40 x 1 x 2 80 240 330 380

15.5 x 0.8 x 3 37.2 160 210 240 40 x 1 x 3 120 330 450 540

15.5 x 0.8 x 4 49.6 195 265 295 40 x 1 x 4 160 400 560 630

15.5 x 0.8 x 6 74.4 225 320 360 40 x 1 x 5 200 450 630 710

15.5 x 0.8 x 8 99.2 165 380 430 40 x 1 x 6 240 480 680 750

15.5 x 0.8 x 10 124 300 420 480 40 x 1 x 8 320 600 830 920

40 x 1 x 10 400 670 920 1030

20 x 1 x 2 40 170 240 270

20 x 1 x 3 60 230 320 360 50 x 1 x 3 150 400 570 650

20 x 1 x 4 80 270 380 440 50 x 1 x 4 200 490 700 790

20 x 1 x 5 100 300 430 490 50 x 1 x 5 250 540 780 880

20 x 1 x 6 120 330 470 530 50 x 1 x 6 300 690 840 950

20 x 1 x 8 160 400 560 620 50 x 1 x 8 400 680 1000 1130

20 x 1 x 10 200 420 580 650 50 x 1 x 10 500 750 1100 1300

24 x 1 x 2 48 200 280 320 63 x 1 x 5 315 650 900 1000

24 x 1 x 3 72 250 360 410 63 x 1 x 6 378 690 950 1100

24 x 1 x 4 96 280 410 460 63 x 1 x 8 504 840 1200 1350

24 x 1 x 5 120 330 170 530 63 x 1 x 10 630 920 1300 1450

24 x 1 x 6 144 360 510 570

24 x 1 x 8 192 420 590 670 80 x 1 x 5 315 650 900 1000

24 x 1 x 10 240 500 700 790 80 x 1 x 6 378 690 980 1100

80 x 1 x 8 504 840 1200 1350

32 x 1 x 2 64 230 320 360 80 x 1 x 10 630 920 1300 1450

32 x 1 x 3 96 280 410 460

32 x 1 x 4 126 320 460 520 100 x 1 x 5 500 860 1250 1400

32 x 1 x 5 160 390 550 610 100 x 1 x 6 600 950 1380 1530

32 x 1 x 6 192 440 620 700 100 x 1 x 8 800 1100 1580 1760

32 x 1 x 5 256 510 720 800 100 x 1 x 10 1000 1220 1710 1920

32 x 1 x 10 320 600 840 930 100 x 1 x 12 1200 1300 1800 2010

32 x 1 x 10 320 600 840 930 100 x 1 x 12 1200 1300 1800 2010

33

LAMDA ELECTRIC



Press Welded Flexible Connector

Press welding can only be performed on red copper and it depends on its dimensions and customers specifications. The laminated sections are compressed and reconstructed by block during the terminal phase. via use of high currents. The contact resistance between each lamina is almost zero. Contact areas : PWR press welded. Copper strips : 0.1 mm thick witcover sheet 0.3 mm. It is also possible to deliver contact areas with tinned or silvered design.

Red copper Section (mm)

A (mm)

B (mm)

S (mm)

L (mm)

Holes D (mm)

Terminal drill

Current flow A

PWR 200/180/40 200 50 40 5 180 13 W1 600

PWR 200/230/40 200 50 40 5 230 13 W1 600

PWR 320/230/40 320 50 43 8 230 13 W1 800

PWR 400/230/40 400 50 45 10 230 13 W1 900

PWR 250/250/50 250 60 45 5 250 13 W1 700

PWR 400/250/50 400 60 48 8 250 13 W1 950

PWR 500/250/50 500 60 50 10 250 13 W1 1100

PWR 480/300/60 480 90 70 8 300 13 W2 1100

PWR 600/300/60 600 90 70 10 300 13 W2 1200

PWR 640/300/80 640 90 70 8 300 13 W4 1350

PWR 800/300/100 800 90 70 10 300 13 W4 1500

PWR 960/300/80 960 90 70 12 300 13 W4 1700

PWR 800/350/100 800 110 80 8 350 13 W5 15550

PWR 1000/350/100 1000 110 80 10 350 13 W5 1800

PWR 1200/350/120 1200 110 80 12 350 13 W5 1900

PWR 1200/400/120 1200 130 80 10 400 13 W7 2000

PWR 1440/400/120 1440 130 80 12 400 13 W7 2200

Documents

Earthing and Lightning Protection