ECCOMAS 2012

European Congress on Computational Methods in

Applied Sciences and Engineering

e-bookFull Papers

September 10-14, 2012

Vienna, Austria

© Vienna University of TechnologyInstitute for Mechanics of Materials and StructuresInstitute of Lightweight Design and Structural Biomechanics

© photocredits Gustav Klimt, the Kiss: Belvedere, Vienna (www.belvedere.at); Secession: WienBild

ISBN: 978-3-9503537-0-9

ECCOMAS 2012 e-book containing all full papers submitted to the ECCOMAS 2012 Congress (6th European Congress on Computational Methods in Applied Sciences and Engineering), September 10-14, 2012, Vienna, Austria

Editors:Josef Eberhardsteiner, Helmut J. Böhm, Franz G. Rammerstorfer

ECCOMAS 2012 e-book | I  

Table of Contents    Enhanced formula for a critical velocity of a uniformly moving load Z. Dimitrovová

1

Microscopic model for simulation of traffic flows on multilane highways and crossroads N. Churbanova, A.A. Chechina, I.R. Furmanov, M.A. Trapeznikova

11

Structure-preserving time integrators for thermo-elasticity with heat conduction P.L. Mata, A.J. Lew

18

Analysis of vibro-based isolated building D. Makovicka, D. Makovicka

38

Comparison of some reduction bases approaches for non-linear structural dynamic systems under different excitations F.A. Lülf, D.M. Tran, R. Ohayon

47

Increasing of aerodynamical performances of flying configurations,via global shape optimization A. Nastase

64

Robust vibration control of flexible structures using smart materials with uncertainties K. Zhang, M. Ichchou, G. Scorletti, F. Mieyeville

75

Causality, “superluminality,” and reshaping in undersized waveguides D. Sokolovski , E. Akhmatskaya

93

Simulation of specimen-geometry effect on ceramics strength by randomly distributed damage approach T. Hoshide, H. Sugiyama

104

Analysis of relative slip on press-fitted contact surface between wheel and axle H. Kawashima

116

A finite volume Lagrangian cell centered mimetic approach for computing elasto-plastic deformation of solids in general unstructured grids S.K. Sambasivan, R. Loubere, M. Shashkov

125

Shape optimization of thermoelastic fields for mean compliance minimization E. Katamine, H. Yoshioka

143

Multi-objective optimization of cyclone geometry based on CFD simulations using the desirability function and genetic algorithms K. Elsayed, C. Lacor

155

Study of the effect of mechanical loading on cell cultures in bone tissue engineering M. Cruel, M. Bensidhoum, L. Sudre, G. Puel, T. Hoc

175

On the performance of a parallel direct solver used within a hybrid spectral/finite element solver for incompressible flows X. Dechamps, G. Degrez, M. Rasquin

184

An efficient implementation of simulating annealing in GPUs and its application to calibration of SABR stochastic volatility model A.M. Ferreiro, J.A. García, J.G. López-Salas, C. Vazquez

198

A comprehensive image processing methodology for automatically detecting shield tunnel defects Q. Ai, Y. Yuan

208

Optimization of a Krueger device for a regional aircraft wing configuration D. de Rosa, G. Andreutti, D. Quagliarella

219

Prediction of particle distribution on wall in magnetic separation T. Inaba, T. Sakazume, Y. Yamashita, S. Matsuoka

230

Thermodynamic model for strain-induced crystallization in rubber L. Thien-Nga, J. Guilie, P. Le Tallec

237

Asymptotics of electron flow spin-polarization in quantum waveguides of variable cross-section in presence of magnetic field L.M. Baskin, P. Neittaanmäki, O. Sarafanov

253

Finite element based trajectory planning for distributed-parameter thermal systems T. Meurer

263

   

ECCOMAS 2012 e-book | II  

Geometrical and thermal characterization of silica aerogel using classical molecular dynamics J.J. Yeo, T.Y. Ng, Z.S. Liu

277

Description of deformation process due to heat transfer in a two-phase polycrystalline composite structure T. Sadowski, P. Golewski

286

Computational mechanics of knitted structures - critical overview Y.K. Kyosev, W. Renkens

296

Computational modeling of high speed RTM of automotive part involving on-line mixing of highly reactive two-component resin system C. Binetruy, M. Deleglise, S. Comas-Cardona, S.G. Advani

304

Second order linearization effects based on the matrix stiffness A.M. Wahrhaftig, J.A.L. Rocha, R. Brasil

316

Flow over periodic hills - test case for ERCOFTAC knowledge base wiki M. Breuer, C. Rapp, M. Manhart

325

Fluid-structure interaction in turbulent flows: LES predictions and PIV measurements G. De Nayer, M. Breuer, A. Kalmbach

344

Parallel potts model simulation of nanocrystalline grain growth S. Schäfer, D. Zöllner

364

On the motion of continua with non-material boundary conditions - an investigation with one-dimensional examples A. Franze, B.W. Zastrau

375

Numerical modelling of viscoplastic free surface flows in complex 3D geometries K. Nikitin, M. Olshanskii, K. Terehov, Y. Vassilevski

388

Coupling numerical simulations of mold filling processes with numerical simulations on bubble scale for polyurethane foams S.G. Geier, F.W. Bartels, M. Piesche

402

Exact evaluation of singular and near-singular integrals in Galerkin BEM M. Lenoir, N. Salles

413

Nonlinear behavior of thin-layered structures under contact and friction A. Dorninger, E. Karer, J. Gerstmayr

432

Multi-objective optimization for an air pollution problem L.J. Alvarez-Vazquez, N. Garcia-Chan, A. Martinez, M.E. Vazquez-Mendez

448

Comparison of asymptotic and numerical studies of electron flow spin-polarization in quantum waveguide in magnetic field M. Kabardov, P. Neittaanmäki

455

Concurrent multiscale analysis of heterogeneous materials O. Lloberas-Valls, F.P.X. Everdij, D.J. Rixen, A. Simone, L.J. Sluys

467

Remarks on time integration schemes used for high precision control J. Pandtle, R.H. Steinbuch

482

Comparison between CFD and wind tunnel measurements of a roof mounted air ventilated equipment in a high speed train I. Ali, A. Rüter, B. Bahl

490

Numerical investigation of a cavitation phenomenon round a propulsor blade K. Tesch, J.A. Szantyr, P. Flaszynski

498

An approach for modelling the roughness-induced boundary layer transition using transport equations P. Dassler, D. Kožulović, A. Fiala

507

Computational approach to fatigue behaviour of randomly or unidirectional fibre reinforced materials R. Brighenti, A. Carpinteri, D. Scorza

525

Dynamic finite deformation thermo-viscoelasticity using energy-consistent time-integration M. Krüger, M.M. Groß, P. Betsch

536

High-order absorbing boundary conditions and perfectly matched layers for cables and beams laid on elastic supports G. Lancioni

551

Numerical analysis on asymmetrically combined glulam M. Frese, H.J. Blaß

564

   

ECCOMAS 2012 e-book | III  

Hydrodynamic applications using ReALE method T. Harribey, J. Breil, P.-H. Maire, M. Shashkov

574

A method for computing waveguide scattering matrices in the presence of point spectrum B.A. Plamenevskii, O. Sarafanov

588

Topology optimization in fluid dynamics using adjoint-based truncated Newton D.I. Papadimitriou, E.M. Papoutsis-Kiachagias, K. Giannakoglou

597

Locally resolving large scale turbulent structures by a hybrid – Lattice Boltzmann and Finite Volume – turbulence model S. Pirker, C. Goniva, C. Kloss, S. Puttinger, P. Seil, S. Schneiderbauer

611

Stochastic modelling and analysis of porous media using first-order perturbation-based homogenization method K.S. Basaruddin, N. Takano

621

Damage-based crack initiation and propagation H. Minnebo, T. Van Hoof, O. Pierard

631

Transport of pollutant solved by radial basis boundary element method K. Kovarik, J. Muzik, D. Sitanyiová

642

Applying CAD/CAE tools in the roll center determination for a double A automotive suspension G.O. Andrade, M.A.A. Nunes, R.D.C. Silva

653

Minimizing the environmental impact of wastewater discharges with SOS A. Martinez, L.J. Alvarez-Vazquez, N. Garcia-Chan, M.E. Vazquez-Mendez

666

High order stochastic Finite Volume Method for the uncertainty quantification in hyperbolic conservation laws with random initial data and flux coefficients S. Tokareva, S. Mishra, C. Schwab

673

Hybrid RANS/LES, PANS and PRNS computations of plane impinging jets S. Kubacki, J. Rokicki, E. Dick

687

Interaction of flexible multibody dynamics with fluids by means of smoothed particle hydrodynamics M. Schörgenhumer, P.G. Gruber, J. Gerstmayr

703

Numerical flow simulations used in industrial problems K. Adamek, J. Kolar

723

Conservative segregated solution method for turbulence model equations in compressible flows C. Morsbach, F. di Mare

738

Approximation of non-convex anisotropic energies via Willmore energy P. Pozzi, P. Reiter

752

Homogenization and modelling of technical textiles S. Fillep, J. Mergheim, P. Steinmann

769

Inversion of seismic reflection data through focusing W.A. Mulder

781

An improved flexibility-based nonlinear frame element endowed with the fiber-free formulation F. Marmo, L. Rosati

795

Modeling of gas separated flows at inlet of suction channels on the basis of stationary discrete vortices O. Averkova, A. Logachev, I. Logachev, K. Logachev

812

A fully unconstrained interior point algorithm for multivariable state and input constrained optimal control problems P. Malisani, F. Chaplais, N. Petit

832

Graph grammar based parallel direct solver for 1D and 2D isogeometric finite element method M. Paszynski, K. Kuznik, V.M. Calo

849

Finite element modeling of timber-concrete composite beams under short-term loadings N. Khorsandnia, H.R. Valipour, K. Crews

859

2D phase-field analyses of dendrite and axon growth of nerve cell K. Nakagawa, T. Takaki, Y. Morita, E. Nakamachi

868

Simulation of the dynamics of internal combustion engines considering oil film lubricated contacts G. Offner

879

Hierarchy of preconditioning techniques for the solution of the Navier-Stokes equations discretized by 2nd order unstructured finite volume methods S. Langer

895

   

ECCOMAS 2012 e-book | IV  

Crack identification in electromagnetic testing using genetic algorithms based on extended finite edge elements J.-C. Boisson, F. Lefèvre, S. Lohrengel

917

Multi-objective optimization of effective thermo-mechanical properties of metal-ceramic composites M. Kursa, K. Kowalczyk-Gajewska, H. Petryk

936

Stochastic reconstruction of porous media and evaluation of their effective transport properties P. Capek, M. Vesely, V. Hejtmanek, L. Brabec

945

A micro-meso numerical strategy for the simulation of the degradation of laminated composites F. Daghia, P. Ladeveze

961

Approximate feedforward control design for flexible multibody systems using singular perturbed models T. Gorius, R. Seifried, P. Eberhard

972

Numerical modelling and simulation of a 20 mm 54 g FSP impact into a composite – foam – ceramic shield M. Klasztorny, P. Dziewulski, M. Swierczewski, A. Morka

989

Modeling and simulation of inelastic microstructure development and inhomogeneous material behaviour via non-convex rate dependent gradient plasticity B. Klusemann, T. Yalcinkaya, M. Geers, B. Svendsen

1005

Nonlinear piezoelectric model based on switching processes and its finite element formulation M. Kaltenbacher, M. Nicolai, B. Kaltenbacher, A. Schönecker

1016

Numerical simulation of stable fatigue crack growth rate using a cohesive zone model S. Silitonga, J. Maljaars, F. Soetens, H.H. Snijder

1028

On the time-stepping stability of continuous mass-lumped and discontinuous Galerkin finite elements for the 3D acoustic wave equation E. Zhebel, S. Minisini, W.A. Mulder

1041

On Maxwell system in waveguides B.A. Plamenevskii, A. Poretckii

1052

Modeling frictional contact conditions with the penalty method in the extended finite element framework E. Biotteau, J.-P. Ponthot

1063

High-order accurate p-multigrid discontinuous Galerkin solution for complex industrial applications A. Ghidoni, S. Rebay, D. Pasquale

1074

Contribution cancelled 1084 Unsteady simulations of flow and heat transfer in a plane turbulent impinging jet using URANS, DES and LES R. Dutta, A. Dewan, B. Srinivasan

1087

A multi-mesh adaptive scheme for air quality modeling with the finite element method L. Monforte, A. Pérez-Foguet

1100

Boundary conditions for semi-implicit low Mach number flow calculation Y. Moguen, P. Bruel, E. Dick

1116

Strain localization analysis of layered materials with debonding interfaces by a second-order homogenization approach A. Bacigalupo, L. Gambarotta

1136

Comparison of three viscous terms approximations for discontinuous Galerkin method by solving model convection-diffusion problems A.I. Troshin, V.V. Vlasenko, A.V. Wolkov

1154

A novel nodal integral method based solution for buoyancy driven flows N. Kumar, S. Singh, J.B. Doshi

1172

Stress around a center hole in a finite plate subjected to internal pressure by MFS W. Fujisaki, T. Fujisawa

1185

Understanding the drag reduction properties of the flow over k- and d-type rough surfaces A. Alhinai, A. Nowakowski

1192

Numerical formulation of kinematically exact three-dimensional beam based on strain measures P. Cesarek, M. Saje, D. Zupan

1209

Effective drag law for parcel-based approaches - what can we learn from CFD-DEM? S. Radl, M. Girardi, S. Sundaresan

1225

Subcell resolution in uncertainty quantification J.A.S. Witteveen, G. Iaccarino

1240

ECCOMAS 2012 e-book | V  

Effects of diffusion limitations on the response of biosensors utilizing parallel substrates conversion V. Ašeris, R. Baronas, J. Kulys

1258

Efficient uncertainty quantification with gradient-enhanced kriging: applications in FSI J.H.S. de Baar, T.P. Scholcz, C.V. Verhoosel, R.P. Dwight, A.H. van Zuijlen, H. Bijl

1268

Accelerating convergence of the CFD linear frequency domain method by a preconditioned linear solver A.J. McCracken, S. Timme, K.J. Badcock

1280

GBT-based buckling mode identification from finite element analysis of thin-walled members M. Nedelcu, N. Chira, A.G. Popa, H.L. Cucu

1291

Analysis of dynamic propagation of brittle failure by PDS-FEM with energy balance consideration M. Kondo, K. Oguni

1305

BEM analysis of a non-homogeneous plane containing multiple defects and swept by SH-waves P.S. Dineva, T. Rangelov, G. Manolis

1320

Three-dimensional simulation of a continuum dislocation dynamics theory S. Wulfinghoff, T. Böhlke

1328

Weighing in motion of railway vehicles: development and comparison of different identification/measurement techniques A. Rindi, L. Pugi, E. Meli

1337

Mechanical behavior of single mineralized collagen fibril using finite element simulation coupled to quasi-brittle damage law A. Barkaoui, A. Bettamer, R. Hambli

1357

Composite finite element simulation of radio frequency ablation and bone elasticity L.O. Schwen, T. Pätz, T. Preusser

1366

A smoothed moving least squares method for the application in porodynamics A. Schönewald, O. von Estorff

1384

Fast convolution quadrature for the wave equation in 3D L. Banjai, M. Kachanovska

1397

Three-dimensional gravity-driven film flow over topography: full Navier-Stokes solutions P.H. Gaskell, H.M. Thompson, S. Veremieiev

1410

Developments in BEM-based finite element methods on polygonal and polyhedral meshes S. Rjasanow, S. Weißer

1421

On theory and computation of gradient-based multifield inelasticity H. Clasen, C.B. Hirschberger

1432

Frequency-domain analysis method of semi-infinite acoustic medium with uniform cross section S. Li

1443

A 3D constitutive wood model using the concepts of continuum damage mechanics C. Sandhaas, J.-W.G. van de Kuilen, H.J. Blass

1451

Sensitivity analysis of transient temperature field in micro-domains with respect to the dual phase lag model parameters E. Majchrzak, B. Mochnacki

1469

Numerical heat transfer - generalization of temporary temperature field correction method B. Mochnacki, E. Majchrzak

1480

Non axisymmetric free vibration analysis of linearly varying thickness shells of revolution by a bi-hierarchical finite element M.N. Ouissi, A. Houmat

1494

High-order algorithm for non-linear dynamics J.E. Laier

1513

A poly-grid SEM approach for wave modeling in complex media G. Seriani, C. Su

1520

High-order numerical methods for underwater acoustic scattering problems T. Lähivaara, T. Huttunen

1528

Optimization of a turbulence model by using data assimilation H. Kato, S. Obayashi

1542

Regularized shallow water equations applied to flows with wet/dry bottom areas O. Bulatov, T. Elizarova, J.-C. Lengrand

1556

   

ECCOMAS 2012 e-book | VI  

Discrete adjoint solvers in industrial design J.-D. Müller, F. Christakopoulos, W. Jahn, S. Xu

1572

Contribution cancelled 1581 Construction of polynomial chaos expansion for uncertain material parameters from limited experimental data K. Sepahvand, S. Marburg

1589

Three fields finite elements for viscoplastic free surface flows and variational data assimilation N. Martin, J. Monnier

1605

A dynamic VMS-LES model and its hybrid extension for the simulation of bluff-body flows C. Moussaed, S. Wornom, B. Koobus, M.V. Salvetti, A. Dervieux

1624

A new approach towards the numerical integration of multibody systems with unilateral constraints B. Esefeld, H. Ulbrich

1644

Particle methods for 3D biological flows with variable density and viscosity R. Chatelin, P. Poncet

1663

The LS-STAG immersed boundary method for non-Newtonian fluids: flow of shear-thinning liquids between eccentric rotating cylinders O. Botella, M. Ait-Messaoud, A. Pertat, C. Rigal, Y. Cheny

1676

The rotational quaternion-based beam FEM formulations E. Zupan, M. Saje, D. Zupan

1690

A Galerkin approach to FFT-based homogenization methods S. Brisard, L. Dormieux

1709

A high-continuity multi-scale static and dynamic modelling of periodic materials A. Bacigalupo, L. Gambarotta

1719

A second order penalized direct forcing for hybrid cartesian/immersed boundary flow simulations C. Introïni, M. Belliard, C. Fournier

1732

Reduction strategies for PDE-constrained optimization problems in haemodynamics G. Rozza, A. Manzoni, F. Negri

1749

Updating the probabilistic density function related to an uncertain parameter of a model for producing voice, using Bayesian approach E. Cataldo, C. Soize, R. Sampaio

1769

A new meshless method applied to the analysis of 3D structures J. Belinha, L.M.J.S. Dinis, R.M. Natal Jorge

1781

Adjoint mesh deformation and adjoint-based sensitivities with respect to boundary values A. Engels-Putzka, C. Frey

1789

Extending moving least squares to mixed variables for metamodel-assisted optimization R. Filomeno Coelho

1809

Partitioned simulation of long and slender cylinders corresponding to nuclear fuel rods vibrating in axial flow J. De Ridder, J. Degroote, K. Van Tichelen, J. Vierendeels

1823

Development and optimization of an innovative joining technique for composite structures using the finite element method H. Lang, A.C. Nogueira, K. Drechsler, E. Hombergsmeier

1833

The analysis of thick plates considering a new meshless method J. Belinha, L.M.J.S. Dinis, R.M. Natal Jorge

1850

Partitioned solution of the unsteady adjoint equations for a strongly coupled fluid-structure interaction problem J. Degroote, M. Hojjat, E. Stavropoulou, R. Wüchner, K.-U. Bletzinger

1858

Optimization of the aluminum and steel telecommunication towers using the generalized perturbation-based stochastic finite element method M. Kaminski, M. Solecka

1876

Adaptive coupling between stochastic and deterministic continuum models in the framework of the Arlequin method C. Zaccardi, L. Chamoin, R. Cottereau, H. Ben-Dhia

1894

Multiharmonic balance analysis of a jointed friction oscillator D. Süß, K. Willner

1907

   

ECCOMAS 2012 e-book | VII  

Estimation of simultaneous leakage flow rates and initial temperature states inside soild dikes through temperature measurements by both deterministic and metaheuristic methods S. Kerzalé, M. Maillet, A. Girard

1915

Error control in reliability analysis of cracked structures L. Gallimard

1927

A quasi brittle damage assesment simulation model of cortical bone specimens under compressive load A. Bettamer, R. Hambli, S. Allaoui, A. Barkaoui, A. El Hraiech, R. Jennane

1933

Simulation of damage in laminates J.L. Curiel Sosa, J.J. Munoz, S.T. Pinho, Q. Li, O.A. Beg

1940

Developement of a contact model for an electric motor lamination stack V. Luchscheider, K. Willner

1947

Development of a wear model for the wheel profile optimization on railway vehicles running on the Italian net M. Ignesti, A. Innocenti, L. Marini, E. Meli, A. Rindi

1956

Efficient usage of multiple NVIDIA GPUs for viscous compressible flows simulation A.A. Davydov, E.V. Shilnikov

1975

An innovative numerical tool to analyze the rolling and sliding friction of viscoelastic materials G. Carbone, C. Putignano

1985

Nonlinear seismic response analysis of piles in nonlinear viscoelastic foundation E.J. Sapountzakis, A.E. Kampitsis

1994

Conquer the terabyte scale: post-processing of high resolution unsteady CFD data for turbomachinery analysis C. Voigt, J. Wellner, C. Morsbach, E. Kügeler

2007

Numerical challenging of capturing membrane action in reinforced concrete beams and one-way slabs N. Farhang Vesali, H.R. Valipour, B. Samali

2020

Wear prediction in the railway field: development of a model for the study of the wheel and rail profile evolution M. Ignesti, L. Marini, E. Meli, A. Rindi

2036

Prediction and analysis of the helicopter rotor performances in hovering flight T. Azzam, T. Belmerabet, M. Mekadem, S. Hanchi

2056

The splitting finite-difference scheme for two-dimensional heat conduction equation with four nonlocal integral conditions S. Sajavicius

2064

Computing reachable sets via barrier methods on SIMD architectures L. Grüne, T. Jahn

2076

Numerical study of non-Newtonian viscoelastic compressible fluid flow in a planar contraction/expansion H.M. Matos, P.J. Oliveira

2096

Computational modeling of self-organization in a liquid phase bacterial bioluminescent biosensor R. Baronas, Ž. Ledas, R. Šimkus

2114

On the effectiveness of the bypass explosion valve Y.H. Polandov, M. Barg, V. Babankov

2123

Stokes-Darcy coupling for layers with high permeability ratio - decoupled approach R. Troian, S. Drapier

2131

Non-symmetric BEM-FEM tearing and interconnecting method L. Rodríguez-Tembleque, J.A. González, R. Abascal, K.-C. Park

2150

Reliability analysis of linear dynamical systems with uncertain structural parameters subject to discrete white noise excitation M. Valdebenito, H. Jensen, G.I. Schuëller, A.A. Labarca

2168

Numerical analysis of frame/shear wall structures of variable cross section and loading W. Savassi, M.R.S. Corrêa

2179

An inverse problem for adhesive contact and non-direct evaluation of material properties F.M. Borodich, B.A. Galanov, S.N. Gorb, M.Y. Prostov, Y.I. Prostov

2191

Numerical investigation of unsteady behavior of laminar separation bubble near stall conditions J.H. Almutairi, I.M. AlQuadi

2205

ECCOMAS 2012 e-book | VIII  

The contact material point method and its comparison with the finite element method P. Huang, Z. Hao

2220

Convergence acceleration of the iterative algorithms for the Navier-Stokes equations on structured grids S.I. Martynenko

2228

A fully coupled finite element model for hydro-mechanical behaviour of soft rock J. Ma, N. Khalili

2242

Stochastic interval analysis of natural frequency and mode shape of structures with uncertainties C. Wang, W. Gao, C. Song

2251

Application of the meshless method of fundamental solutions in estimation of hydraulic flow characteristics in the permeable foundation of concrete diversion dam S.A. Lashteh Neshaei, A. Madandoust

2265

A numerical model in precasting segment of an immersed tunnel Y. Luo, Y. Yuan, R. Chai

2272

The extended finite element method applied to 3D free-surface flows H. Sauerland, T.-P. Fries

2285

Linearly implicit energy-conserving Runge-Kutta methods for the incompressible Navier-Stokes equations B. Sanderse, B. Koren

2294

Using of CFD simulations for increasing speed and temperature of flame spray technology T. Zabransky, J. Hamza, J. Kleckova

2307

Numerical analysis of hydrodynamic characteristics of wavy liquid films on rotating disks D. Prieling, H. Steiner, G. Brenn

2317

Conforming finite elements with embedded strong discontinuities D. Dias-da-Costa, J. Alfaiate, L.J. Sluys, P. Areias, C. Fernandes, E. Júlio

2332

Numerical method for the relation between velocity of detonation and curvature of diverging detonation J. Cheng

2345

3D image filtering and segmentation using morphological tools J. Debayle, J.-C. Pinoli

2352

On the application of the discontinuous Galerkin method to turbomachinery flows S. Cherednichenko, C. Frey, G. Ashcroft

2359

Aeroacoustic validation of the Lattice Boltzmann method on non-uniform grids M. Hasert, H. Klimach, J. Bernsdorf, S.P. Roller

2376

Solving linear sparse systems on threedimensional structured grids using matrix-free methods: a comparison A. Keßler, C. Könke

2394

Numerical simulation of a HIL fullscale roller-rig model to reproduce degraded adhesion conditions in railway applications B. Allotta, R. Conti, E. Meli, L. Pugi, A. Ridolfi

2407

Numerical and mathematical approach to the behaviour of the interfaces in the flow through porous media K. Tomoeda

2427

Effect of heterogeneous friction stress on the macroscopic behavior of magnesium single crystal T. Liu, S. Groh

2434

CFD prediction of aerodynamic pressures on silo surfaces to investigate wind induced ovalling vibrations J. Hillewaere, J. Degroote, G. Lombaert, J. Vierendeels, G. Degrande

2443

Construction of D-optimal design of experiments for polynomial chaos expansion S. Zein, B. Colson

2462

Modelization of immersed structures at arbitrary positions in an acoustic fluid using XFEM A. Legay

2475

Particle-turbulence interactions in homogeneous and isotropic turbulence G. Mallouppas, W. George, B. van Wachem

2489

Numerical solution of unsteady p-incompressible Navier-Stokes equationsby the LDG finite element method T. Malkmus, I. Toulopoulos

2505

ECCOMAS 2012 e-book | IX  

Aeroacoustic investigation of an airfoil using a mixed finite element scheme A. Hüppe, M. De Gennaro, M. Kaltenbacher, H. Kühnelt

2522

Proximal human femur fracture assessment using isotropic and orthotropic materials: a comparative FE-study using a quasi brittle damage models A. Bettamer, R. Hambli, S. Allaoui, A. Barkaoui, A. El Hraiech, R. Jennane

2539

Asynchronous collision integrator for frictionless impacts S. Wolff, C. Bucher

2548

On the analysis of FGM structures using enhanced finite elements S. Kugler, P. Fotiu, J. Murin

2554

Space-time shear-slip mesh update method for fluid-structure interaction problems H. Schippke, A. Zilian

2574

Thin film flow simulation on a rotating disc P. Vita, B. Gschaider, D. Prieling, H. Steiner

2590

Theoretical modeling and analysis of mode II cracks in compact shear specimens V. Petrova, T. Sadowski

2601

Three-dimensional thin film flow problems solved accurately and efficiently: rivulet formation, merger and evolution P.H. Gaskell, Y.C. Lee, D. Slade, S. Veremieiev

2612

Boundary conditions for the compressible gas flow as a modification of the Riemann problem M. Kyncl, J. Pelant

2625

Numerical simulation of a flow inside an exhaust diffuser J. Simak, J. Pelant

2642

Simulations of large scale three-dimensional sedimentary basin dynamics through domain decomposition techniques A. Cervone, N.A. Fadel, L. Formaggia

2651

Fatigue analysis of tube sheet welds with multi-pass welding lines H. Li, Y. Zheng, L. Li

2664

A finite element approach for the coupled numerical simulation of fluid-structure interaction and mass transfer of moving biofilm structures M. Coroneo, L. Yoshihara, G. Bauer, W.A. Wall

2671

Large scale flow simulation with complex spacer geometry in electrodialysis for sea water desalination K. Masilamani, J. Zudrop, K. Ibrahim, M. Johannink, H. Klimach, J. Bernsdorf, A. Mhamdi, E.M. Fernandez Sanchis, A. Hauser, W. Marquardt, S.P. Roller

2685

A kinetically based algorithm for porous medium flow simulation on multicore computer systems M. Trapeznikova, B. Chetverushkin, N. Churbanova, D. Morozov

2702

Numerical modelling and analysis of the failure behaviour of dowel-type connections in wood B. Franke, S. Franke, P. Quenneville

2709

Investigation of noise radiated by a subsonic jet using a non-conservative implicit large-eddy simulation method C.A.S. Moser, M.F. Medeiros

2720

Modeling of dynamic perfusion test using a two-scale model of tissue parenchyma with layer-wise decomposition E. Rohan, V. Lukes, A. Jonasova

2733

Investigation of stabilized high order schemes for underresolved multi-scale flows A. Beck, T. Bolemann, G. Gassner, C.-D. Munz

2744

Operator splitting methods for pricing American options under jump-diffusion models and stochastic discrete dividends S. Salmi, J. Toivanen

2754

Modelling of contact interface oxidation process at asperity scale J. Maciejewski, M. Białas, Z. Mróz

2766

Unsteady simulation of the flow during the deployment of high-lift systems N. Renard, J. Wild

2774

Generalised implementation of Low-Mach preconditioning for arbitrary three-dimensional geometries J. Fiedler, F. di Mare

2793

   

ECCOMAS 2012 e-book | X  

Thermomechanically consistent material modeling with damage for simultaneous hot/cold forming based on enhanced rheological models C. Bröcker, A. Matzenmiller

2808

3D anisotropic Delaunay meshing for ideal interfacing to block-unstructured mixed meshes using a sparse octree for metric size propagation J. Wild

2828

An analysis of the performance of a high-order stabilised finite element method for simulating compressible flows R. Sevilla, O. Hassan, K. Morgan

2848

Goal oriented error for stochastic plastic finite element problem E. Florentin, B. Blaysat

2854

Computer aided diagnosis of osteoporosis in human pelvic bones A. John, P. Wysota

2860

A Lagrangian meshfree directional difference method for two dimensional compressible flow problem S. Sun, L. Shen

2868

Monolithic approach of Stokes-Darcy coupling for the simulation of liquid infusion process L. Abouorm, S. Drapier, J. Bruchon, N. Moulin

2880

Numerical coupling strategy for evaporating two-phase flow computations: application to solid rocket motors A. Sibra, F. Laurent, A. Murrone, J. Dupays, M. Massot

2893

Efficient topology optimization using local rules of cellular automata B. Bochenek, K. Tajs-Zielinska

2913

Application of an edge-based smoothed finite element method on geometrically non-linear plates of non-linear material R. Frotscher, H.-J. Raatschen, M. Staat

2928

Modeling the behavior of wood with knots at macro-scale level P. Guindos, M. Guaita

2937

Aircraft geometry parameterization with high-end CAD-software for design optimization A. Ronzheimer

2948

High lift devices design of a supersonic transport aircraft based on 3D computational fluid dynamics M. Gaffuri, J. Brezillon

2966

Aeolus purge system conductivity analysis G. Markelov, M. Endemann, D. Wernham

2981

Analysis of a fast iterative method in a dual time algorithm for the Navier-Stokes equations R.C. Swanson, E. Turkel

2993

Inverse problem of fluid temperature estimation inside a flat mini-channel starting from temperature measurements over its external walls Y. Rouizi, D. Maillet, Y. Jannot, I. Perry

3006

Constitutive modelling of damage in adhesively bonded joints for static and cyclic sustained loadings with constant and variable amplitudes A. Matzenmiller, U. Kroll

3020

The use of neural networks with selective actuation neurons for the three-dimensional design optimization of multistage turbomachinery C. Cravero, P. Macelloni, G. Briasco

3031

A multiscale finite element method for transport modeling G. Allaire, S. Desroziers, G. Enchéry, F. Ouaki

3052

Seismic performance of tunes mass dampers with uncertain parameters B. Schmelzer, C. Adam, M. Oberguggenberger

3070

Efficient polar optimization of transport aircraft in transonic RANS flow using adjoint gradient based approach C. Ilic, M. Widhalm, J. Brezillon

3090

Assessment of a fifth-order residual-based compact scheme for steady and unsteady compressible flows K. Grimich, P.-Y. Outtier, P. Cinnella, A. Lerat

3111

Numerical simulation of passive tip-leakage flow control method for axial turbines A. Benoni, R. Willinger

3125

ECCOMAS 2012 e-book | XI  

Boundaries for heat transfer deterioration onset in supercritical pressure channel flows A. Urbano, F. Nasuti

3138

A unified approach to build H(div)-reconstructed error estimators on the primal mesh R. Becker, D. Capatina, R. Luce

3158

Restriction matrices for exploiting symmetry in 3D wave propagation analysis by energetic BEM A. Aimi, M. Diligenti, A. Frangi, C. Guardasoni, M. Manzini

3172

New FGM beam finite element for modal analysis of the 2D beam structures J. Murin, M. Aminbaghai, J. Hrabovsky, V. Kutis

3192

A coupled high-resolution fractional-step artificial compressibility and pressure-projection formulation for solving incompressible multi-species variable density flow problem at low Reynolds numbers L. Könözsy, D. Drikakis

3206

Residual based a posteriori error estimates for MITC plate elements L. Beirao da Veiga, J. Niiranen, R. Stenberg

3221

Using a level set to model multiple myeloma induced bone loss B. Ayati, J.M. Graham, S.A. Holstein

3236

Damaging mechanisms and constitutive modeling of metal-matrix composites G. Bolzon, A. Cornaggia

3249

Dynamics of corotational beam elements in large displacements and rotations - some aspects on the kinetic energy and the integration of the equations of motions F. Foti, L. Martinelli

3259

High-order curved mesh generation using linear elasticity Z.Q. Xie, R. Sevilla, O. Hassan, K. Morgan

3273

Multipoint approximations of stochastic elastic boundary value problem for polydisperse composites M. Tashkinov

3279

Evaluation of the CNT agglomeration impact on the mechanical properties of CNT-based polymer composites W. Leclerc, P. Karamian, A. Vivet, A. Campbell

3291

Micro-CT based homogenization of the elastic properties of cortical bone: influence of the heterogeneous distribution of mineral and porosity V. Sansalone, V. Bousson, S. Naili, C. Bergot, F. Peyrin, J.-D. Laredo, G. Haiat

3301

Coupled boundary optimal control problems in thermal fluid dynamics with lifting function approach and Vanka-type solvers G. Bornia, S. Manservisi

3310

Computable bounds of linear functional outputs in linear visco-elastodynamics F. Verdugo, P. Diez

3329

Refined shape memory alloys model taking into account martensite reorientation F. Auricchio, E. Bonetti, G. Scalet, F. Ubertini

3349

Computational methods for Bayesian estimation and control in reliability and maintenance modeling V. Makis, M.J. Kim, C. Lin

3363

Constitutive equations and finite element formulation for anisotropic hyperelastic composites based on constrained Cosserat continuum T. Lasota, J. Burša, S. Fedorova

3379

Distributed octree mesh infrastructure for flow simulations H. Klimach, M. Hasert, J. Zudrop, S.P. Roller

3390

Utilization of neural networks for simulating vehicle induced air velocity in underground tunnels G. Koç, K. Albayrak, C. Sert

3405

Computer simulation of seismic behavior of building structures using SIMULINK of MATLAB B. Blostotsky, E. Efraim

3417

Identification of microscale heat transfer parameters using bioinspired algorithms T.S. Burczynski, J. Dziatkiewicz, W. Kus, E. Majchrzak

3426

A Newton method for fluid-structure interaction using full Jacobians based on automatic form differentiation G. Balaban, A. Logg, M.E. Rognes

3434

Reliability-based characterization of base-isolated structural systems H. Jensen, D. Kusanovic, M. Papadrakakis

3448

   

ECCOMAS 2012 e-book | XII  

Generalized convection-diffusion through the discrete representation of the Lie derivative P.P. Rebelo, A. Palha, M. Gerritsma

3457

Buckling load and displacement variability of cylindrical shells with stochastic material and geometric properties G. Stefanou, V. Papadopoulos, M. Papadrakakis

3477

Molecular dynamics studies of plastic behavior of nanocrystalline aluminum under indentation and tensile loading C.-Y. Wu, Y.-C. Wang

3490

Crystal plasticity finite element simulation of fatigue tests using experimental microstructures imaged by X-ray tomography J. Li, H. Proudhon, S. Forest, A. Roos, W. Ludwig

3498

Numerical recipes for equivalent continuum modeling of jointed systems O. Vorobiev, E. Herbold

3510

An approach for investigating the complexity of an automated draping process using the finite-element method D.F. Liebau, J. van Campen, T. Sommer-Dittrich, N. Dölle, P. Middendorf

3522

Numerical modelling of phase transformation in DP steel after hot rolling and laminar cooling M. Pernach, K. Bzowski, M. Pietrzyk

3541

Determination of the plastic strength of carbonates from microtomography and the upscaling using percolation theory J. Liu, R. Freij-Ayoub, K. Regenauer-Lieb

3550

Warm press forming of magnesium with assist of direct cooling using water and induction heating I. Tanabe

3560

O(n) algorithm for identification of domain isolation by fracture surfaces H. Sumitomo, K. Oguni

3567

On the discretization of spatial metrics satisfying the GCL identities Y. Abe, T. Nonomura, N. Iizuka, K. Fujii

3575

Bayesian uncertainty quantification and propagation in molecular dynamics simulations P. Angelikopoulos, C. Papadimitriou, P. Koumoutsakos

3595

Comparison of algorithms for solving large-scale optimization problems with bound constraints for meteorological data assimilation Y. Horibata

3609

Fluid and motion coupled simulation of descending parachute R. Shibusawa, S. Takahashi, N. Arai

3618

Molecular dynamics simulations on the coherency of Cu precipitates in BCC-Fe D. Molnar, F. Maier, P. Binkele, S. Schmauder

3631

An adaptive NXFEM for the interface problem on locally refined triangular and quadrilateral meshes N. Barrau, R. Becker, E. Dubach, R. Luce

3638

Numerical study on focusing of ultrasounds in microbubble-enhanced high intensity focused ultrasound therapy K. Okita, S. Takagi, Y. Matsumoto

3647

Design and simulation of an autonomous underwater vehicle B. Allotta, R. Costanzi, N. Monni, L. Pugi, A. Ridolfi, G. Vettori

3656

Considering nearest neighbors to identify recrystallizing grains during automated SEM/EBSD data post-processing M. Kühbach, M. Loeck, O. Sukhopar

3674

One-shot optimisation with grid adaptation using adjoint sensitivities A. Jaworski, J.-D. Müller, J. Rokicki

3685

Uncertainty quantification using nonparametric quantile estimation and metamodeling B. Rhein, T. Clees, M. Ruschitzka

3694

Modelling of the bypass-transition in the linear turbine blade cascade P. Straka, J. Příhoda

3711

Modeling of strengthening concrete structures by concrete overlays M. Aschaber, Y. Theiner, G. Hofstetter

3726

   

ECCOMAS 2012 e-book | XIII  

Implicit time advancing applied to shallow water problems coupled with different models of sediment transport H. Guillard, M. Bilanceri, P. Cinat, F. Beux, I. Elmahi, M.V. Salvetti

3736

An integrated approach for image-based computation based on the X-FEM: accuracy and high-order approximation G. Legrain, P. Cartraud, W.-D. Lian

3752

Efficient simulation of viscous flow by means of turbulence regularization modeling and local grid refinement H.J.L. van der Heiden, P. van der Plas, A.E.P. Veldman, R. Luppes, R.W.C.P. Verstappen

3761

Stabilized finite element methods to deal with incompressibility in solid mechanics in finite strains D. Al Akhrass, S. Drapier, J. Bruchon, S. Fayolle

3781

Optimizing of compressed-air consumption in air-jet weaving machines by modeling and simulation of weft insertion C. Sasse, T. Holtermann, M. Stankowski, G. Seide, T. Gries

3794

Solid-state sintering simulation: surface, volume and grain-boundary diffusions D. Pino Muñoz, J. Bruchon, F. Valdivieso, S. Drapier

3803

Time-linearized simulation of unsteady transonic flows with shock-induced separation R. Thormann, J. Nitzsche, M. Widhalm

3817

Simplified hybrid laminar flow control for transport aircraft G.H. Schrauf, H. von Geyr

3831

Refined collapse capacity spectra for predicting seismic collapse of structures vulnerable to the P-delta effect S. Tsantaki, L. Wurzer, C. Jäger, C. Adam, M. Oberguggenberger

3843

Mixed 3D beam models: differential equation derivation and finite element solutions F. Auricchio, G. Balduzzi, C. Lovadina

3860

Special finite-difference methods for extremely anisotropic diffusion B. van Es, B. Koren, H. de Blank

3871

An hp-adaptive level set method for simulating two-component flows in optofluidic devices S. Ronnas, V. Heuveline

3889

An arbitrary Langrangian-Eulerian approach for the numerical simulation of Drosophila flight B. Erzincanli, M. Sahin

3906

Perturbation analysis for the stochastic Darcy problem F. Bonizzoni, F. Nobile

3926

Solid-shell finite element models for explicit simulations of crack propagation in thin structures G. Cocchetti, M. Pagani, U. Perego

3934

Fluid-structure interaction in turbulent flows and the influence of LES subgrid-scale models M. Münsch, A. Delgado, M. Breuer

3944

Application of the metamodel-assisted multi-gradient descent algorithm (MGDA) to air-cooling duct shape optimization A. Zerbinati, J.-A. Desideri, R. Duvigneau

3964

On a consistent, scale-truncation model for large eddy simulation R.W.C.P. Verstappen

3974

Modelling and finite element simulation of the mechanical behaviour of fibrous materials D. Durville, T.D. Vu

3986

Hydrodynamics instability effects in laminar premixed flames S. Schlimpert, D. Hartmann, M. Meinke, W. Schröder, S. Hemchandra

3999

A volume mesh finite element method for PDEs on surface M. Olshanskii, A. Reusken, X. Xu

4016

Boundary element method modelling of nanocomposites J. Ptaszny, G. Dziatkiewicz, P. Fedelinski

4030

Arbitrary-order nodal mimetic discretizations of elliptic problems on polygonal meshes L. Beirao da Veiga, G. Manzini

4041

Compatible NURBS R. Hiemstra, R. Huijsmans, M. Gerritsma

4061

   

ECCOMAS 2012 e-book | XIV  

Interstitial fluid flow within bone canaliculi: numerical assessment of the influence of physical and material parameters V. Sansalone, J. Kaiser, S. Naili, T. Lemaire

4091

An Eulerian Godunov-type scheme for calculation of the elastic-plastic flow equations with moving grids I. Menshov, A. Mischenko, A. Serezhkin

4099

Finite element determination of the lacunar-canalicular permeability of bone, implications in bone S. Lemonnier, S. Naili, T. Lemaire

4119

Inflation of elastic membranes in contact with rigid or deformable surfaces R. Barsotti, S.S. Ligarò

4129

Higher order implicit time integration schemes to solve incompressible Navier-Stokes on co-located grids using consistent unsteady Rhie-Chow V. Kazemi-Kamyab, A.H. van Zuijlen, H. Bijl

4139

GBT-based local and global post-buckling analysis of Roorda’s frame D. Camotim, C. Basaglia

4148

Contribution cancelled 4168 Multi-scale approaches of strain ageing in polycrystalline tantalum D. Colas, E. Finot, S. Flouriot, S. Forest, M. Mazière, T. Paris

4175

Use of computational fluid dynamic to detect pressure loss in a direct ethanol fuel cell P.M. Belchor, M.M. Forte, D. Carpenter, A. Pasqualini, A. Blass

4195

Nonclassical gasdynamics of vapor mixtures E. Casati, E. Rinaldi, A. Guardone, P. Colonna

4201

Towards a European modelling framework analysing coupled physico-chemical processes in porous media for geotechnical applications U.-J. Goerke, W. Wang, O. Kolditz

4212

System identification based on selective sensitivity analysis: a case-study M. Billmaier, C. Bucher

4228

XFEM coupling of granular flows interacting with surrounding fluids F. Pasenow, A. Zilian, D. Dinkler

4248

Influence of discretization and model errors on inverse computational fluid dynamics: application to a water pipe junction J. Waeytens, P. Chatellier, F. Bourquin

4267

ANN-based clinical decision support system for treatment planning of maxillary implant-supported prosthesis F. Jafari, M. Mohammadi-Amin, L. Sedighpour, A. Taheri

4278

Real-time image-based FIT simulation using GPU computing and its application to nondestructive testing K. Nakahata, K. Kimoto

4285

Simulation of materials behavior during in-situ consolidation using continuous welding processes like thermoplastic tape placement R. Schledjewski, M.A. Khan, P. Mitschang

4298

Quadratic least-squares formulation for a local active noise control with stochastic domain and noise source T. Airaksinen, J. Toivanen

4308

Multiscale anisotropic mesh adaptation for a third-order accurate approximation of Euler flow E. Mbinky, F. Alauzet, A. Loseille, A. Dervieux

4318

A 3D shear deformable beam element based on the absolute nodal coordinate formulation applied to classical buckling problems K. Nachbagauer, J. Gerstmayr

4324

Efficient time integration for discontinuous Galerkin method for the unsteady 3D Navier-Stokes equations P. Birken, G. Gassner, M. Haas, C.-D. Munz

4334

Numerical simulation of boundary-layer stabilization using plasma actuators D.G.D.S.D.R. Vieira, A. Duchmann, M. Schäfer, S. Grundmann

4354

A new model and numerical method for compressible two-fluid flow J. Kreeft, B. Koren

4365

   

ECCOMAS 2012 e-book | XV  

Idealized Abdominal Aortic Aneurysm (AAA) geometry as predictor of hemodynamics stresses E. Soudah, G. Villalta, M. Bordone, J.A. Vilalta, F. Nieto, M.Á. Pérez, C. Vaquero

4385

Comparison study of numerical methods of explosion process implementation P. Baranowski, J. Malachowski, L. Mazurkiewicz

4396

Computational model of a direct-fired continuous strip annealing furnace for simulation, control, and optimization S. Strommer, M. Niederer, A. Steinböck, A. Kugi

4407

Source of acoustic waves from a supersonic jet impinging on an inclined flat plate with various plate angle S. Morizawa, T. Nonomura, H. Honda, S. Obayashi, M. Yamamoto, K. Fujii

4425

Linear frequency domain predictions of dynamic derivatives for the DLR F12 wind tunnel model M. Widhalm, A.R. Hübner, R. Thormann

4438

Characterization of clear wood by a single specimen: evaluation of first results and further improvements A. Majano-Majano, J.L. Fernandez-Cabo, J. Xavier

4458

A geometrically exact beam model with nonuniform warping coherently derived from the Saint Venant rod G. Garcea, A. Bilotta, A. Genoese, A. Genoese

4470

Proposal for an advanced wave guide element J. Kreutz, G. Müller

4486

Modeling and analysis of the Camus I RC shear wall P. Martinelli, L. Martinelli, M.G. Mulas

4497

Optimal design of layered refractories for thermal shock resistance J. Hein, M. Kuna

4511

A variational multiscale method with multifractal subgrid-scale modeling for large-eddy simulation of turbulent flow V. Gravemeier, U. Rasthofer

4525

Pure and hybrid optimizers applicable to aeronautical design problem K. Chiba

4544

The interpolation of the director vector for isogeometric Reissner-Mindlin shell analysis W. Dornisch, S. Klinkel

4556

XFEM modeling of inelastic material behavior and damage phenomena in composites S. Müller, M. Kästner, V. Ulbricht

4566

On the characterization of the plastic behaviour of sheet metals with bulge test: numerical simulation study C.A. Rodrigues, L.C. Reis, N.A. Sakharova, M.C. Oliveira, J.V. Fernandes

4575

Wave generation and absorption with OpenFOAM P. Higuera, J. L. Lara, I.J. Losada

4590

Agglomeration-based physical frame dG discretizations for high-order accurate CFD F. Bassi, L.A. Botti, A. Colombo

4606

Dual decomposition of optimal control problems with coupled nonlinear dynamics S. Hentzelt, K. Graichen

4625

A study about the influence of height on slope stability using limit equilibrium methods and evolutionary computation D. Greiner, F. Chirino, J.M. Emperador, B. Galván, G. Winter

4639

Numerical simulations of two-phase flow with ComFLOW: past and recent developments R. Luppes, B. Duz, H.J.L. van der Heiden, P. van der Plas, A.E.P. Veldman

4647

High speed flow control using synthetic jet actuators C. Nae, M.V. Pricop, G. Cojocaru

4663

Experimental comparison for two one-dimensional constitutive models for shape memory alloy wires used in anti-seismic applications A. Chiozzi, M. Merlin, R. Rizzoni, A. Tralli

4672

Interaction between velocity potential and displacement in time-harmonic elasto-acoustic coupling: a numerical method with spectral elements and controllability approach S. Mönkölä

4683

   

ECCOMAS 2012 e-book | XVI  

Robust vibration reduction of structures with uncertain piezoelectic joints Y. Karim, C. Blanze

4694

Mechanical modelling of human hernia repair based on experimental simulations I. Lubowiecka, A. Tomaszewska, C. Szymczak, M. Śmietański

4708

Adaptive strategies for moment estimation using stochastic collocation and Kriging based approaches D. Chandra Sekhar, A.J. Keane, A.I.J. Forrester

4720

Fractional multi-phase hereditary materials: mellin transform and multi-scale fractances M. Di Paola, F.P. Pinnola, M. Zingales

4735

On the design of a non-conforming high-resolution finite element scheme M. Möller

4746

Two-scale modeling of reactive powder concrete by the method of numerical homogenization A. Denisiewicz, M. Kuczma

4765

Spectral fictivious domain methods with internal forcing for solving elliptic problems L. Le Penven, M. Buffat

4778

A primal-dual shakedown analysis of 3D structures using the face-based smoothed finite element method N.T. Tran, M. Staat

4787

Numerical stability enhancement of modeling hyperelastic materials T.M. Duong, H.N. Nguyen, M. Staat

4794

Mechanical behavior of fractional visco-elastic beams M. Di Paola, R. Heuer, A. Pirrotta

4809

Computer modelling of strengthening of brick masonry cross vaults with FRP composites J. Szołomicki, P. Berkowski, J. Barański

4820

A rational approach to modeling turbulence in industrial flows B. Basara

4830

Goal-oriented error estimation and adaptive control in the reduction of nonlocal particle models L. Chamoin, J. Marchais, C. Rey

4841

Verification of a mesomechanically motivated constitutive law for FRP B. Stier, S. Reese

4848

A novel solid-beam finite element for the simulation of nitinol stents J. Frischkorn, S. Reese

4859

An accurate numerical method for computation of two-phase flows with surfactants S. Ganesan, A. Hahn, K. Held, L. Tobiska

4878

Upwind-difference potentials method for chemotaxis model Y. Epshteyn

4890

Numerical constitutive model for wood with elastic-plastic characteristic M. Oppel, M.G. Jahreis, K. Rautenstrauch

4902

Numerical model of a cylinder pin reinforced metal to composite single-lap shear joint S. Ucsnik, T. Staffenberger

4917

A singular-free procedure for the direct computation of bifurcation points of shell structures F.-J. Falkner

4926

Unified multiscale model for predicting the mechanical behavior of textile reinforced concrete X.F. Guan, X. Liu, Y. Yuan

4939

Shear cell test setup for characterization of bulk material flowability in a granular simulation environment J. Fuchs, C. Weiß

4948

Identification of ultrasonic properties of layered materials M.G. Messineo, G.L. Frontini, L. Gaete Garretón

4959

Experimental and numerical analysis of the tensile test of aluminium welded sampels P. Lacki, J. Adamus, T. Sadowski, K. Wojsyk, M. Kneć

4969

Computational rheology of core-shooting materials F. Uhlig, R. Schwarze, S. Luding

4980

A weakly compressible formulation for modelling liquid-gas sloshing J.A. Heyns, O.F. Oxtoby, A.G. Malan

4990

   

ECCOMAS 2012 e-book | XVII  

Error estimation and error bounding in quantities of interest based on equilibrated recovered displacement fields E. Nadal, O.A. González-Estrada, J.J. Ródenas, S.P.A. Bordas, P. Kerfriden, F.J. Fuenmayor

4999

Numerical simulations of impacts using combined finite-discrete element method H. Smoljanović, N. Živaljić, Ž. Nikolić, A. Munjiza

5019

Friction welding of the bars made of aluminium and titanium alloys P. Lacki, K. Wojsyk, K. Kudła, R.E. Śliwa

5029

Error estimation and error bounding in energy norm based on a displacement recovery technique E. Nadal, O.A. González-Estrada, J.J. Ródenas, S.P.A. Bordas, F.J. Fuenmayor

5042

Identification of internal boundary position in two-layer domain on the basis of external surface temperature distribution S. Freus, K. Freus, E. Majchrzak, B. Mochnacki

5058

Computational study of a hybrid flow control system on a NACA 4415 airfoil A.A. Rojas, O.D. López

5073

Isogeometric analysis of space rods: considerations on stress locking M. Cuomo, L. Greco

5094

Elasto-hydrodynamic lubrication of rough contacts: on a rigorous generalisation of the homogenisation approach B.F. Scheichl, F.S. Guerrieri Paleotti

5113

An application of hp-adaptivity to the inverse problem of electrical impedance tomography P.D. Ledger

5133

Ferrohydrodynamic flow simulation in porous media using the Lattice Boltzmann method A. Sousa, M. Hadavand

5152

Numerical optimization of rectangular micro-channel heat sinks H.-W. Tang, P.-J. Cheng, Y.-T. Yang, Y.-P. Hsu

5163

Level set-based topology optimization using an immersed boundary element method S. Yamasaki, T. Yamada, T. Matsumoto

5182

Researches of high-speed flows in slotted channel of complicated shape M. Goldfeld, A.V. Starov, K.Y. Timofeev, Y.V. Zakharova

5195

Finite element code in Python as a universal and modular tool applied to Kohn-Sham equations R. Cimrman, J. Vackář, M. Novák, O. Čertík, E. Rohan, M. Tůma

5212

CFD analysis of the drying process of coal blend during coal coking process Z. Bulinski, L. Slupik, A.J. Nowak

5222

Direct numerical simulation of the 3D separated viscous fluid flows around the horizontally moving blunt bodies P.V. Matyushin, V.A. Gushchin

5232

Numerical simulation prediction for the elastic behavior of concrete taking into account its mesoscopic structure R. Sassine, E. Malachanne, E. Garcia-Diaz, F. Dubois, M. Vinches

5242

Numerical homogenization of transfer properties of heterogeneous media by immersed interface method D.P. Do, D. Hoxha, S. Wu, N. Belayachi

5256

Failure modeling of concrete with a novel strain rate sensitive viscoelastic retarded damage material formulation U. Häussler-Combe, T. Kuehn

5270

A generalized isogeometrical analysis approach for free vibration analysis of plane elasticity problems B. Hassani, M.H. Abolbashari, A.H. Taheri, N.Z. Moghaddam

5289

Uncertainties on the inverse source problem for elliptic boundary value problems C.J.D.S. Alves, N. Martins, M. Colaco, M.L.D.S. Rainha, N.C. Roberty

5298

Modeling of compression test for large cell 3D reinforced composite specimens I. Osheva, A. Tashkinov, V. Shavshukov

5312

Numerical and experimental investigation of the piezoelectric actuator used for the synthetic jets membrane control R. Rimašauskiene, W. Ostachowicz, P. Malinowski, T. Wandowski

5321

Treatment of simultaneous deformation and solid-state precipitation in thermo-kinetic calculations P. Sherstnev, P. Lang, E. Kozeschnik

5331

ECCOMAS 2012 e-book | XVIII  

Validity of models and their verification M. Okrouhlik, R. Kolman

5339

Estimation of unknown contact resistance by means of reciprocity function approach M. Colaco, C.J.D.S. Alves

5359

From nodal patch schemes to averaged strain elements G. Castellazzi, P. Krysl

5375

Numerical and experimental studies on segregation patterns in granular flow from two hoppers P. Seil, J. Ortega Gomez, S. Pirker, C. Kloss

5389

Analysis of the clinical performance of an aortic BMHV by numerical simulation S. Annerel, L. Taelman, J. Bols, T. Claessens, J. Degroote, P. Segers, P. Verdonck, J. Vierendeels

5403

Total FETI method and singular matrices in engineering problems A. Markopoulos, T. Brzobohaty, T. Kozubek, Z. Dostal

5411

Modelling of nonlinear vibro-acoustic wave interaction in cracked aluminium plates using local interaction simulation approach A. Martowicz, P. Packo, W.J. Staszewski, T. Uhl

5420

Zonal large eddy simulation for the numerical prediction of the acoustic performance of an axial fan M. De Gennaro, A. Zanon, H. Kühnelt, P. Giannattasio

5430

Approximation of objects by spheres for multisphere simulations in DEM S. Amberger, M. Friedl, C. Goniva, S. Pirker, C. Kloss

5446

Developing magnetogasdynamic flow and heat transfer in a microchannel H.C. Weng

5459

Meshless analysis of circular plate with varying position of piezoactuator P. Stanak, J. Sladek, V. Sladek, S. Krahulec

5466

Analysis of column web panel in shear for asymmetrical steel joints using finite elements models A. Loureiro, M. Lopez, E. Bayo

5482

Elasto-plasto-damage modeling of laminated composites H.E. Pettermann, J. Gager, E. Rama, T. Flatscher

5492

CFD calculation of heat transfer and combustion processes in the cooling stack of a converter plant J. Contreras Espada, P. Laaber, T. Steinparzer, F. Wackerle, G. Wimmer

5499

Two-way coupling modeling through Eulerian moment method for spray injection in engine simulations O. Emre, F. Laurent, S. de Chaisemartin, S. Jay, D. Kah, M. Massot

5511

Medical device risk analysis: blood damage potential in heart valves’ regurgitation phase M. Grigioni, G. Wang, C. Daniele, G. D'Avenio

5529

Multi-layered textile composites - a shell element based homogenization approach J. Gager, H.E. Pettermann

5540

Fluid-structure interaction in a weakened basilar artery A. Montanino, M. Angelillo

5552

Preliminary assessment of a new algorithm for the MHD equations at all Mach number regimes C. Xisto, J.C. Páscoa, P.J. Oliveira

5573

RTM permeability prediction using CFD and a GPU acceleration of a lattice Boltzmann solution for sub-grid probability density functions L. Bergamasco, S. Izquierdo, M.A. Jimenez

5587

Modified level set equation for gas-liquid interface and its numerical solution V. Sabel'nikov, A. Ovsyannikov, M. Gorokhovski

5597

Energy absorption of braided structures and their numerical analysis L. Eckstein, R. Matheis

5612

Reducing spurious drag forces when using mesh adaptivity in CFD F.F.M. Milthaler, G.J. Gorman, M.D. Piggott

5621

Application of fractional chaotic models in geotechnics R. Magaña, A. Hermosillo, M. Pérez

5641

Frequency-domain Navier-Stokes computations of transonic nozzle flows S. Labit, M. Philit, J.-C. Chassaing, S. Aubert, P. Ferrand

5658

Finite strain inelastic models with gradient averaging and AceGen implementation B. Wcislo, T. Zebro, K. Kowalczyk-Gajewska, J. Pamin

5673

   

ECCOMAS 2012 e-book | XIX  

Numerical and analytical determination of multispan cable eigenfrequencies O.A. Ivanova

5688

Assembly optimization of two-dimensional structures by multiobjective evolutionary algorithm C.J. Camacho, D.A. Garzón

5697

3D vortex structures dynamics simulation using vortex fragmentons I.K. Marchevsky, G.A. Shcheglov

5716

Transverse isotropic elastic dynamic sphere problem B. Chabaud, J. Brock, T. Williams

5736

Parameter identification of time-homogenized models describing material fatigue G. Puel, D. Aubry

5749

IMEX Runge-Kutta schemes for hyperbolic systems with diffusive relaxation G. Russo, S. Boscarino

5764

Finite element simulation of dynamic pile penetration into a saturated porous medium H. Sabetamal, M. Nazem, S.W. Sloan, J.P. Carter

5774

Direct numerical simulation of gas transfer with high Schmidt number in a buoyant-convective flow B. Kubrak, J. Wissink, H. Herlina

5786

Calculation of theoretical shear strength of metals and covalent crystals based on ab initio and empirical atomistic models Y. Umeno, Y. Shiihara, A.M. Iskandarov, S.V. Dmitriev

5797

Numerical study on multiphase flows with compressible effects in converging-diverging nozzle M.S. Jin, C.T. Ha, W.G. Park

5806

Inverse analysis for estimating thermal property from full field measurement M. Maekawa, S. Kubo, S. Ioka

5815

Morphology effects on plasticity behavior of cellular materials S. Imatani

5826

Unsteady flow through the gap of Savonius turbine rotor K. Kludzińska, J. Swirydczuk

5835

Identification of a vertical crack by the active pulse-echo method using smart layer T. Oohigashi, Y. Wataka, S. Kubo

5844

Strain field theory for viscoelastic continuous high-speed webs with plane stress behavior M. Kurki, J. Jeronen, T. Saksa, T. Tuovinen

5854

Evaluation of carotid stent scaffolding through patient-specific finite element analysis F. Auricchio, M. Conti, M. Ferraro, A. Reali

5870

Local maximum entropy particle based hydrodynamics in GPUs D. Hartmann, D. Theurer

5884

Improvement of a resolved open source fluid-particle interaction method A. Hager, C. Kloss, S. Pirker, C. Goniva

5892

Computational challenges in using strain-gradient theories in three dimensions S.-A. Papanicolopulos, A. Zervos

5902

Inverse scattering of guided waves for shape reconstruction of plate thinning B. Wang, S. Hirose, T. Saitoh, K. Nakahata

5910

A damage model to simulate nanoindentation tests of lamellar bone at multiple penetration depth R. Lucchini, D. Carnelli, D. Gastaldi, M. Shahgholi, R. Contro, P. Vena

5919

Comparison of constitutive soil models for the simulation of dynamic roller compaction J. Pistrol, F.-J. Falkner, D. Adam, C. Adam

5925

Improved Adomian decomposition method for generalized Burger's-Fisher equation E. Ocvirk, M. Mestrovic

5940

Sparse direct solution of large finite element problems P. Parik, J. Plesek

5946

Vortex element method for 2D flow simulation with tangent velocity components on airfoil surface V.S. Moreva, I.K. Marchevsky

5952

Calculation of vibro-acoustic structural response by fast BEM and FEM approaches L. Gaul, D. Brunner, M. Junge, J. Herrmann

5966

Gaussian quadrature rules for arbitrary cut-volumes in embedded interface methods Y. Sudhakar, W.A. Wall

5976

   

ECCOMAS 2012 e-book | XX  

Analysis of clothing pressure on the human body T. Kobayashi, S. Oi, M. Sato, M. Tanaka, Y. Isogai, K. Furuichi, S. Ishimaru, C. Nonomura

5991

Role of porosity and tissue mineral density in determining the elastic properties of cortical bone tissue in the human femoral neck V. Sansalone, V. Bousson, S. Naili, C. Bergot, F. Peyrin, J.-D. Laredo, G. Haiat

6004

Three-dimensional modeling of fracture by fast multipole symmetric Galerkin boundary element method. Application to multi-fractured media T.Q. Trinh, S. Mouhoubi, C. Chazallon, M. Bonnet

6013

Two dimensional creep analysis of a linear cracked viscoelstic medium using the extended finite element method P. Hajikarimi, S. Mohammadi, S. Aflaki

6021

Finite strain fracture analysis using the extended finite element method R. Rashetnia, S. Mohammadi, I. Mahmoudzadeh Kani

6031

Identification of structural resonance peaks using EMI method S. Opoka, L. Skarbek, T. Wandowski, P. Malinowski, W. Ostachowicz

6040

On application of vortex element method for aeroelastic airfoil dynamics simulation G.A. Shcheglov, A.V. Ermakov

6050

Application of the inverse analysis for retrieval of the heat transfer coefficient for free surface water jet impingement A. Ryfa, R.A. Bialecki

6064

Step configuration influence on combustion in premixed hydrogen-air supersonic flow N.N. Fedorova, I.A. Bedarev, Y.V. Zhakharova, M.A. Goldfeld

6074

Diffuse failure mechanism involved in a vertical breakwater foundation M.M. Stickle, P. de la Fuente, C. Oteo

6089

Numerical simulation of blood flows in the aorta with aortic valves by virtual flux method T. Fukui, K. Morinishi

6099

On increase of eficiency of plasma multi-actuator system S.L. Chernyshev, A.P. Kuryachii, D.A. Rusyanov, V.V. Skvortsov

6109

Study on highly efficient numerical simulation of flow using thirteen velocity quasi-equilibrium lattice Boltzmann model T. Yasuda, T. Hashimoto, I. Tanno, Y. Tanaka, H. Minagawa, K. Morinishi, N. Satofuka

6124

Mullins' effect in polymer/clay nanocomposites: observations and constitutive modeling A.D. Drozdov, J.D. Christiansen, R. Klitkou

6130

Implicit high-order discontinuous Galerkin solution of turbulent flows with an explicit algebraic Reynolds stress model F. Bassi, L.A. Botti, A. Colombo, C. De Bartolo

6145

Experimental and numerical investigations on fire-resistance of a wood-concrete composite deck R. Meena, M. Schollmayer, S. Hehl, T. Tannert

6161

Effect of idealized versus measured inlet velocity profiles on image-based CFD of aortic hemodynamics D. Gallo, R. Ponzini, G. Isu, F. Pennella, M.A. Deriu, G. De Santis, C. Bignardi, G. Rizzo U. Morbiducci

6173

A frictional-kinetic model for dilute to dense gas-particle flows S. Schneiderbauer, S. Pirker

6185

Numerical and experimental study of the bulge test of sandwich shells with metal foam cores H. Mata, R.M. Natal Jorge, A.D. Santos, M.P.L. Parente, R. Valente, A.A. Fernandes

6199

Processing and evaluation of gear data using statistical classifiers C. Tschöpe, M. Wolff

6207

Computational homogenisation of polycrystalline elastoplastic microstructures at finite deformations E. Lehmann, S. Loehnert, P. Wriggers

6213

Analytical formulation of the fracture path and shear resistance for RC beams L. Saucedo, R.C. Yu, G. Ruiz

6229

Structural analysis of a body in white for battery integration using finite element and macro element with the focus on pole crash optimization P. Luttenberger, M. Ostrowski, M. Kurz, W. Sinz

6243

   

ECCOMAS 2012 e-book | XXI  

Aerodynamic shape optimization of wind turbine blades using a 2-D panel method with a boundary layer solver and a genetic algorithm O. Polat, N. Sezer Uzol, I.H. Tuncer

6263

Effect of jet injection on flow structure and mixing in channel with sudden expansion N.N. Fedorova, I. Fedorchenko, M. Goldfeld, S.A. Valger

6279

Application of the method of fundamental solutions for the plane elastoplastic problem M.A. Jankowska, J.A. Kolodziej

6296

Modelling of hydrogel extracellular matrix deformation caused by embedded cells M.H. Doweidar, S. Manzano, R. Moreno-Loshuertos, I. Ochoa, M. Doblaré

6314

Mechanical analysis of pavement material using time-dependent plasticity and isotropic damage models I.F. Gomes, L.M. Costa, I.D.D.S. Pontes

6323

Simulation of quasi-brittle failure by means of a continuum damage model based on first order strain gradient elasticity U.M. Mühlich, M. Kuna

6332

An efficient algorithm for parallel k-exact finite volume reconstruction on unstructured grids F. Haider, P. Brenner, B. Courbet, J.-P. Croisille

6349

Macro modelling for multi-phase transformations at large strains R. Mahnken, M. Wolff, A. Schneidt

6361

Toward the automation of a non linear solver coupling Harmonic Balance and Asymptotic Numerical Methods (HBANM) E. Sadoulet-Reboul, A. Lejeune

6377

A multiple level-set approach for the simulation of flows with moving immersed boundaries C. Günther, M. Meinke, W. Schröder

6388

Structural health monitoring based on piezoelectric sensors W. Ostachowicz, P. Kudela, P. Malinowski, S. Opoka, M.W. Radzieński, L. Skarbek, T. Wandowski

6404

An efficient elasto-plastic parallel solver based on Total-FETI domain decomposition M. Čermák, T. Kozubek

6414

The information-flux method: a true Petrov-Galerkin formulation based on maximum-entropy methods applied to convection-dominated problems K. Nissen, V. Gravemeier, W.A. Wall

6425

Formation flight aerodynamics of oblique flying wing type aircrafts M. Rütten, M. Trenker, H. Rosemann

6439

Simulation of dynamic fracture processes in polycrystalline silicon microsystems by means of a multi-step, domain decomposition method F. Confalonieri, A. Ghisi, G. Cocchetti, A. Corigliano

6453

A penalty-projection algorithm for incompressible fluid-structure interaction S. Bnà, S. Manservisi, G. Bornia

6472

Free vibration of functionally graded beams using the dynamic stiffness method H. Su, J.R. Banerjee

6492

Application of the method of fundamental solutions for inverse problem related to the determination of elasto-plastic properties of cylindrical bar J.A. Kolodziej, M.A. Jankowska, M. Mierzwiczak

6505

Computational fluid dynamics of partially rarefied flows with coupled kinetic Boltzmann/Navier-Stokes methods R. Steijl, G. Barakos

6515

Nonlinear conjugate gradient algorithm for model based design of experiments M. Deregnaucourt, M. Stadlbauer, C. Hametner, S. Jakubek, J. Wurzenberger

6535

Numerical assessment of mass conservation on a MAC-type method for viscoelastic free surface flows F.P. Martins, C.M. Oishi, F.S. Sousa, J.A. Cuminato

6545

Numerical investigation on efficiency increase in high altitude propulsion systems using plasma actuators M. Abdollahzadeh, J.C. Páscoa, P.J. Oliveira

6563

On the multipoint meshless FD method using the local Petrov-Galerkin approach I. Jaworska, J. Orkisz

6582

ECCOMAS 2012 e-book | XXII  

Model-free closed-loop flow control E. Atam, L. Mathelin, L. Cordier

6592

On the role of interface dissipation in MEMS resonators A. Frangi, M. Cremonesi, A. Jaakkola, T. Pensala

6601

Development of high order convective schemes considering the source A. Pascau, N. Garcia, F. Alcrudo

6608

Shape optimization of a flow around circular diffuser in a turbulent incompressible flow S. Erne, M. Lenarcic, C. Bauer, S.A. Kyriacou

6615

Runge-Kutta methods for time integration in computational inelasticity - how to go beyond order 2 B. Eidel, C. Kuhn

6634

Hybrid total FETI method M. Jarosova, T. Kozubek, M. Mensik, A. Markopoulos

6653

Wavenumber domain filtering of elastic wave propagation for damage localization in composite plates M.W. Radzieński, P. Kudela, W. Ostachowicz

6664

High-order discontinuous Galerkin solution of unsteady problems using modified extended backward differentiation formulae A. Nigro, A. Ghidoni, S. Rebay, F. Bassi

6672

On effective implementation of the non-penetration condition for non-matching grids preserving scalability of FETI based algorithms O. Vlach, Z. Dostal, T. Kozubek, T. Brzobohaty

6691

Acceleration of digital-image-based FEM computation by GPU G. Nagai, U. Ueda, Y. Takai, M. Tsukino

6700

A multiphysical simulation model for laser assisted manufacturing H. Koch, R. Gómez Vázquez, A. Otto

6709

Finite element and B-spline methods for one-dimensional non-local elasticity M. Malagù, E. Benvenuti, A. Simone

6723

Anisotropic viscoelasticity within the framework of isothermal two-mechanism models N.H. Kröger, M. Wolff

6734

Modeling of dynamic delamination in L-shaped composite beams B. Gozluklu, D. Coker

6748

A fully implicit 3D elliptic mesh generator for moving boundary flow problems with large arbitrary deformations J. Papaioannou, Y. Dimakopoulos, J. Tsamopoulos

6770

Isogeometric analysis and the finite cell method D. Schillinger, M.A. Scott, J.A. Evans, M.J. Borden, L. Dede, T. Hughes, E. Rank

6781

Modelling of creep and TRIP during heating and austenitisation S. Bökenheide, J. Montalvo-Urquizo, M. Wolff

6792

Identification of contamination flux in a domain of porous media as an inverse problem solved with artificial neural networks M. Lefik, D.P. Boso

6800

Solution to industry benchmark problems with the Lattice-Boltzmann code XFlow D.M. Holman, R. Brionnaud, Z. Abiza

6809

Numerical investigation into mixed electroosmotic flow and pressure-driven flow in microchannels with wavy surfaces C.-C. Cho, Y.-L. Chang, Y.-L. Chang

6825

Characterization of macroscopic mechanical behavior of concrete with mesoscopic scale finite element analysis J.J.C. Pituba, E.A.S. Neto

6835

Mechanobiological model for the simulation of bone mineralization density distribution (BMDD) L. Santos, P.R. Fernandes, H. Rodrigues, J.E. Fonseca

6850

Comparative study of wind effects on tall buildings using international codes and CFD B. Parv, R. Hulea, R. Zoicas

6857

The geometric basis of mimetic spectral approximations M. Gerritsma, J. Kreeft, A. Palha, P. Rebelo, R. Hiemstra

6867

Towards efficient multi-objective optimization for endwall contouring B. Barr, P. Venugopal, S. Shankaran

6887

ECCOMAS 2012 e-book | XXIII  

High-fidelity marine propeller analysis using LES with an immersed boundary method S. Schröder, E. Balaras, N. Beratlis

6897

Numerical simulation of a jet-vortex wake behind a cruise aircraft M.A. Lobanova, Y.M. Tsirkunov

6909

A high-order conservative method for the simulation of compressible multiphase flows V. Perrier, E. Franquet

6923

A note on relationship between fixed-pole and moving-pole approaches in static and dynamic analysis of non-linear spatial beam structures G. Jelenic, M. Gacesa, M. Saje

6941

Zaidenberg’s learning model for the evolution of altruistically cooperative behavior N.J. Zaidenberg, I. Eshel

6952

Advances in Feel++ : a domain specific embedded language in C++ for partial differential equations V. Chabannes, C. Daversin, V. Doyeux, M. Ismail, C. Prud'homme, A. Samake, C. Trophime, S. Veys

6958

Two imbricate finite element methods with smooth approximations F. Cazes, G. Meschke

6977

Numerical modeling of 3 point bending test of a reinforced concrete beam using a second gradient theory G. Jouan, P. Kotronis, F. Collin

6987

Uzawa-like methods for numerical modelling of unsteady viscoplastic Bingham medium flows L.V. Muravleva, E.A. Muravleva

6996

Object-oriented code MARPLE 3D: simulations of radiative hydrodynamic/MHD effects at high-performance computer systems A. Boldarev, V. Gasilov, O. Olkhovskaya, S. Dyachenko, G. Bagdasarov, S. Boldyrev, I. Gasilova, E.Y. Dorofeeva

7008

Large eddy stimulation using simple eddy-viscosity RANS data P. Batten, U. Goldberg, O. Peroomian, S. Chakravarthy, A. Batista de Jesus

7028

Plain- and reinforced-concrete planar beam finite elements with embedded transversal cracking G. Jelenic, P. Sculac, L. Skec

7035

On the use of inflow/outflow boundary conditions in incompressible, internal flow problems using smoothed particle hydrodynamics S. Khorasanizade, J. Pinto, J. Sousa

7050

Effect of thickness and pre-crack length on delamination of unidirectional L-shaped laminated composites B. Gozluklu, D. Yavas, D. Coker

7060

Contribution cancelled 7071 Bayesian assimilation of multi-fidelity stochastic finite element models F.A. DiazDelaO, S. Adhikari, M.I. Friswell

7080

On some composite yield criteria based on the homogenization method L.V. Muravleva

7087

Multi-disciplinary conceptual design of multi-stage hybrid rocket using genetic algorithm and data mining technique M. Kanazaki, Y. Kitagawa, K. Kitagawa, M. Nakamiya, T. Shimada

7099

Weakly enforced boundary conditions for the NURBS-based finite cell method M. Ruess, Y. Bazilevs, D. Schillinger, N. Zander, E. Rank

7119

Numerical investigations on negative refraction and focusing of ultrasonic Lamb waves by a thickness change in an isotropic plate F. Schubert

7135

On comparative study of the eight-chain model and its modified versions for rubber hyperelasticity M. Hossain, A.S. Amin, N. Kabir

7149

Numerical simulations on piezoresistivity of nanofiller and polymer based nanocomposites B. Hu, N. Hu, J. Li, A. Alamusi, Y. Liu, H. Ning, L. Wu

7162

Efficient sensitivity analysis for virtual prototyping T. Most, J. Will

7176

Some aspects of numerical tests of special railway wagon for intermodal transport of heavy semitrailers W. Krason, T. Niezgoda, K. Damaziak

7192

ECCOMAS 2012 e-book | XXIV  

Hybridizable discontinuous Galerkin p-adaptivity for the incompressible Navier-Stokes equations G. Giorgiani, S. Fernández-Méndez, A. Huerta

7204

The interior field method for Laplace's equation on circular domains with circular holes Z.-C. Li, H.-T. Huang, M.-G. Lee

7219

Fatigue analysis of fiber-reinforced polymers S. Vervoort

7233

GPU implementation of the lattice Boltzmann method and virtual flux method I. Tanno, T. Hashimoto, T. Yasuda, Y. Tanaka, K. Morinishi, N. Satofuka

7244

Multiscale analysis of aeronautical composite structures using high fidelity generalized method of cells D. Ivančević, I. Smojver

7251

On the uncertainty quantification of blood flow viscosity and geometrical configuration of the portal vein J.C. Pereira, J.S. Moura, A.R. Ervilha, J.C.F. Pereira

7264

Combining a CDM model and a FE-particle method to analyse the ruin modes of a composite structure during a crash C. Espinosa, F. Lachaud, J. Limido, J.-L. Lacome

7282

A detailed analysis of engine knock initiation by means of a stochastic reactor model M. Heiss, T. Lauer, B. Geringer

7300

Modeling of natural gas engine with the emphasis on prediction of knock D. Kozarac, A. Schuemie, H. Ofner, R. Tatschl

7308

Optimization of a heavy duty engine by integrated numerical models F. Forsthuber, T. Lauer, B. Geringer

7321

Global combustion mechanism for simulation of self ignition S. Voglsam, F. Winter

7333

The orientation of melt bands in an extending lithosphere H.B. Muhlhaus, A. Mohajeri, Y. Finzi, K. Regenauer-Lieb

7344

Multi-parametric stability investigations for pressurized thin membranes A. Eriksson

7357

Analysis of elastoplastic problems with centrifugal load by triple-reciprocity boundary element method Y. Ochiai, V. Sladek

7372

Efficient algorithm for finding all solutions of the inverse kinematics problem of 6R general manipulators T.I. Rudny

7386

Analysis of nonlinear dynamic behavior of micro circular plate actuator using hybrid numerical method C.-C. Liu

7402

Deformation effects on the motion of a non-neutrally drop in plane Poiseuille flow M. Bayareh

7410

Analysis of innovative composite aircraft structures T.L. Havar, C. Werchner

7417

Contact algorithms for cell-centered Lagrangian schemes G. Clair, B. Despres, E. Labourasse

7424

Mid-frequency vibration analysis of a touch screen with stochastic interfaces C. Blanze, P. Rouch

7439

Constitutive microplane and interface laws for multiscale analysis of steel fiber concrete G. Etse, A. Caggiano, S. Vrech

7459

High-order finite volume schemes for two-dimensional nonconservative hyperbolic systems M.J. Castro, J.M. Gallardo, S. Ortega, M. de la Asunción, J.M. Mantas

7478

Natural periods of vibration of outrigger braced shear walls M.P. Nicoreac, J.C.D. Hoenderkamp

7493

A methodological perspective on computational engineering design under uncertainty M. Padulo, M. Guenov

7509

Advanced optimization of hybrid-electric-vehicle drivelines using engine-in-the-loop simulation T. Reimers, B. Tilch, P. Eilts

7529

Quantitative assessment of random field models in FE buckling analyses of composite cylinders V. De Groof, M. Oberguggenberger, H. Haller, R. Degenhardt, A. Kling

7543

A stable and dual consistent boundary treatment using finite differences on summation-by-parts form J. Berg, J. Nordström

7557

   

ECCOMAS 2012 e-book | XXV  

Reduced basis methods for quadratically nonlinear partial differential equations with stochastic influences K. Urban, B. Wieland

7571

Multilevel meshless model for the elasto-plastic torsion of prismatic bars V. Kozulić, B. Gotovac

7591

Free vibration analysis of magnetoelectroelastic beams using the meshfree radial point interpolation method T.Q. Bui, C. Zhang

7607

Analysis and application of suitable CFD-based optimization strategies for high-lift system design P. Iannelli, J. Wild, M. Minervino, F. Moens, M. Raets

7618

An investigation of natural convection boundary layer flow by using homotopy analysis method C.-L. Chen, W.C. Tien

7638

Acceleration of URANS for application to separated high-lift flows P. Eliasson, C.M. Marongiu, S. Mikhaylov, V. Vlasenko, S. Bosnyakov, E. Kazhan

7648

Frequency and time domain BEM in fracture dynamic contact problems - comparative study V. Zozulya

7665

On the H1 discrete - continuum coupling based on the Arlequin method (DEM-CNEM) M. Jebahi, J.-L. Charles, F. Dau, L. Illoul, I. Iordanoff

7685

Evaluation of numerical uncertainties on the modeling of dry masonry structures submitted to out-of-plane loading, using the NSCD method in comparison with experimental tests P. Taforel, F. Dubois, S. Pagano

7698

Contribution cancelled 7717 Comparison of grid adaptation techniques for high lift flows application J. Ponsin, M. Meheut

7726

Dyke-type fracture behaviour in a sedimentary caprock associated with CO2 injection E. Karnaeva, D. Leguillon, A. Baroni, C. Putot

7745

A fracture model for pearlitic steel bars using a cohesive model F. Suárez, J.C. Gálvez, D. Cendón, J.M. Atienza, M. Elices

7759

A one-dimensional 4-node shear-flexible beam element for beam-to-solid modeling in mechanically jointed connections made with screws or nails E.-M. Meghlat, M. Oudjene, H. Ait-Aidet, J.-L. Batoz

7771

Mass-, momentum- and energy conserving discretizations for the shallow water equations B. Van 't Hof, A.E.P. Veldman

7782

Modelling of concrete degradation due to alkali - silica reactionin variable hygro-thermal conditions D. Gawin, W. Grymin, F. Pesavento, L. Simoni, B. Schrefler

7802

A beam to 3D model switch in transient dynamic analysis M.G. Tannous, P. Cartraud, D. Dureisseix, M. Torkhani

7822

Effect of electronic device assembly (fixture tube) on the frequency response of a miniature loudspeaker during end use S.J. Pawar, J.H. Huang, Z.J. Hong

7832

Numerical analysis of a large-scale and deep cylindrical excavation in Shanghai soft deposit W.D. Wang, L.Y. Chang, Z.H. Xu, Q.P. Weng

7843

A geometric bridge between regularised damage and energetically equivalent cracks E. Tamayo-Mas, A. Rodríguez-Ferran

7858

The collocations and least squares method: application to numerical solution of the Navier-Stokes equations V.P. Shapeev, V.I. Isaev, S.V. Idimeshev

7871

Numerical modeling of the boundary value problems using the R-function method and atomic basis functions N. Brajčić Kurbaša, B. Gotovac, V. Kozulić

7891

A general concept for approximation of the trajectories of anisotropic elasticity for mammalian bone, demonstrated for the human mandible C. Kober, C. Müller, P. Young, A. Fritsch, C. Hellmich

7905

Wave propagation for damage location in a stiffened plate like structure M. Palacz, M.W. Radzieński, M. Krawczuk, Ł. Doliński

7912

   

ECCOMAS 2012 e-book | XXVI  

Numerical investigations of 3D transitional and turbulent boundary layers with heat transfer K. Kielczewski, E. Tuliszka-Sznitko

7920

On efficient numerical solution of time-periodic wave equation using controllability technique and mixed finite elements S. Kähkönen, R. Glowinski, T. Rossi, R. Mäkinen

7931

Two stroke engines with low pressure direct injection - a great challenge for simulation! O. Schögl, F. Winkler, R. Kirchberger, H. Eichlseder

7938

A constitutive model for analyzing the strain induced martensitic transformation (SIMT) in metastable austenitic stainless steel at different strain rates N.S.R. Uppaluri, B.P. Gautham

7955

Systematic-validation of a computer-simulation-environment for modeling and dynamic-behavior-analysis of complex mechatronic mobile robot's systems J.M. Bauer, D. Garayalde, D. Riepl, H. Laguyás

7967

Computational fluid dynamic analysis of the regurgitant flow in a bileaflet mechanical heart valve R.K. Nallamothu, D. Rafiroiu, C. Neamtu, V. Diaz, A. Narracott, P. Lawford, R. Hose

7982

Optimization criteria for the TDM design in slender structures excited by wind load M. Morga, G.C. Marano

7990

Compromise between derivative-based and derivative-free optimization for nonsmooth and noisy dynamic responses M. Yamakawa, F. van Keulen

8007

Interval response analysis of a bridge under a moving vehicle with bounded system parameters based on particle swarm optimization algorithm N. Liu, W. Gao, C. Song, N. Zhang

8021

Contribution cancelled 8036 A CFD benchmark for flow separation control application V. Ciobaca, J. Dandois, H. Bieler

8045

Numerical simulation of elastic wave propagation in composite material M. Bause, U. Köcher

8062

Optimally convergent high-order X-FEM for problems with voids and inclusions E. Sala-Lardies, S. Fernández-Méndez, A. Huerta

8080

Numerical draping simulations of textile composite reinforcements T. Gereke, O. Döbrich, M. Hübner, O. Diestel, S. Krzywinski, C. Cherif

8094

Thermal management in the design space exploration of 3D stacks and corresponding package A. Heinig, U. Knöchel, P. Schneider, A. Wilde

8105

Implementation of the edge-based smoothed extended finite element method Y. Nix, R. Frotscher, M. Staat

8117

Linear vibration of structures containing a liquid with capillarity T. Miras, J.-S. Schotté, R. Ohayon

8124

Residual stress simulation of an aero engine disc during heat treatment G. Rauer, A. Kühhorn, M. Springmann

8144

A machine learning based approach to large scale model evaluation and iterative experimental design A. Bartolomé, T. Palau, A. Kuhn, A. Rauh, H.-U. Mader

8158

Improved mesh morphing based on radial basis functions B. Saalfeld, M. Rütten, S. Saalfeld, J. Künemund

8170

Contribution cancelled 8183 Modelling aircraft cabin sources and input parameter uncertainty for a ray tracing algorithm K. Hoge, M. Rescheleit, O. von Estorff

8196

Toward a synthetic cartilage-like scaffold S. Manzano, L. Herrero, C. Pelegay, C.E. Plazas, M.H. Doweidar, I. Ochoa, J.A. Gómez-Tejedor, J.E. Perilla, J.L. Gómez-Ribelles, M. Doblaré

8210

The algebra of quaternions in non-isothermal poroelastic phenomena M.C. Suarez-Arriaga

8222

Enabling system level simulation of 3D integrated systems C. Bayer, S. Reitz, J. Stolle, A. Wilde, P. Schneider

8242

Implicit integration of a model for martensite reorientation in shape memory alloys W. Zaki

8250

ECCOMAS 2012 e-book | XXVII  

TFETI coarse problem massively prarallel implementation D. Horak, V. Hapla

8260

Assessing convergence properties of RANS solvers with manufactured solutions L. Eca, G. Vaz, M. Hoekstra

8268

Steady viscous flow past an array of isothermal wires: effect of the blockage ratio on the flow and heat transfer characteristics J.J. Lizardi, L.A. Martinez-Suástegui

8288

Ultimate capacity of reinforced concrete sections under fire conditions H.F. Barros, C.C. Ferreira, P. Vila Real

8307

Simulation of tyre/road noise by means of a FEM/BEM approach J.H. Schutte, Y.H. Wijnant, E. Verhulp, A. de Boer

8319

Buckling in plate girder webs N.E. Shanmugam

8329

Parallel implicit DNS of Rayleigh-Taylor instability I. Yilmaz, F.O. Edis, H. Saygin

8342

Modeling of the micro-damage in the fibers of composites of stochastic structure with anisotropic components by using statistical approach L. Nazarenko

8361

Finite element analysis of cracked nano-fiber reinforced composite W.K. Ahmed, Y. Al-Douri, K. Aslantas

8373

Singular boundary method for stress analysis in multi-layered coating systems Y. Gu, W. Chen, A.H.D. Cheng

8383

Error functional based finite element formulations for general coupled problems S. Maeda, K. Satoz, H. Takeda, M. Yamada

8398

Mutiple-gradient descent algorithm for multiobjective optimization J.-A. Desideri

8410

The weighted edge finite element method for time-harmonic Maxwell equations with singular solution V.A. Rukavishnikov, A. Mosolapov

8430

Thermal recirculation of viscous incompressible flows in enclosures A. Nicolás, B. Bermúdez

8438

Simulation of hyperbolic type bio-heat transfer problems by differential transformation method H.-Y. Lai, J.-H. Ni, C.-C. Chang

8448

A combined MRT Lattice-Boltzmann and phase-field method for fluid flow and heat transfer simulations in cellular solids J. Ettrich, B. Nestler, M. Rölle

8461

Mapping complex microdefects of porous CFRP-laminates onto structured FE-meshes using the Gauss-point method D. Krause, J. Kreikemeier, D. Chrupalla

8473

Study on method to determining the rational depth of metro station in composed of soil and weathered rock stratum X.D. Wang, Y. Yuan, X. Wu, Z. Du

8483

Modelling of microstructural evolution of titanium during diffusion saturation by interstitial elements Y. Matychak, O. Tkachuk, I. Pohrelyuk, V. Fedirko

8494

Proper choice of model for turbulence treatment while research on flow in large-scale CFD-domains M.D. Muhasilovic, I. Vela, Z. Trobok, A. Petrovic, A. Mededovic, E. Gacanin

8503

 Adjoint methods in CFD-based optimization - Gradient computation & beyond K. Giannakoglou, D.I. Papadimitriou, E.M. Papoutsis-Kiachagias, C. Othmer

8523

Mean velocity profile in the vicinity of a building within urban boundary layer with high density of buildings M. Popovac

8540

An improved thermal-structural finite element model for ductile-to-brittle failure mode transition to model ductile material behavior at high strain rates L. Écsi, P. Élesztős

8549

Multiphysics computational models for cardiac flow and virtual cardiography J.H. Seo, V. Vedula, R. Mittal

8564

   

ECCOMAS 2012 e-book | XXVIII  

Robustness evaluations for CAE-based virtual prototyping of automotive applications J. Will

8578

Robust design optimization based on reliability analysis C. Bucher

8598

On the application of CFD in fire safety - between theory and practice or the user’s role M. Münch

8610

Numerical validation of an acoustic imaging method for duct spinning mode with in-duct circular microphone array X. Huang, E. Peers

8619

On the estimation of the subgrid scale model coefficents in large eddy simulation G. Ghorbaniasl, V. Agnihotri, C. Lacor

8633

Numerical study of aerosol deposition in a simplified human mouth-throat model V. Agnihotri, G. Ghorbaniasl, S. Verbanck, C. Lacor

8646

Parallelization of convolution quadrature based boundary element method for general anisotropy T. Saitoh, A. Furukawa, S. Hirose, C. Zhang

8660

Effect of grain roughness on strength, volume changes, elastic and dissipated energies during quasi-static triaxial compression using DEM J. Kozicki, J. Tejchman

8666

Numerical simulation of the turbulent flow in a rectangular channel with lateral slot J. Goulart, S.I.S. Souza

8677

Accurate and efficient look-up table approach for dense gas flow simulations E. Rinaldi, R. Pecnik, P. Colonna

8690

A comparison study of cavitating flow in a ventricular assist device using laminar and turbulent flow models J.-H. Chen, C. Huang

8705

myRTM: an approach for the simulation of Resin Transfer Moulding (RTM) processes based on cellular automata G.A. Barandun, M. Henne, E. Giger, R. Arbter

8717

Studies of agglomerating, poly-dispersed gas-solid two-phase flows using the EUgran+poly model D. Schellander, S. Schneiderbauer, S. Pirker

8730

A systematic approach to design crash elements and to validate FE-analyses by combining computational methods with analytical considerations B. Müller, M. Schagerl, K.-U. Schröder

8742

Effects of numerical models on internal blasting simulation of a tube-tunnel Z. Wang, Y. Yuan

8752

A phase-field topology optimization model using double-obstacle function T. Takaki

8761

Identification of alloy thermal capacity using the broken line model R. Szopa, B. Mochnacki

8769

Computational models of nanocrystalline materials A. Mrozek, T.S. Burczynski

8779

High-order X-FEM for image-based computations G. Legrain, N. Chevaugeon

8789

LCM process simulation based on reliable permeability measurement P. Mitschang, M. Arnold, G. Rieber

8796

Contributions on the use of arbitrarily smooth generalized finite element approximation functions: application to crack modeling D.A.F. Torres, C.S. de Barcellos, P.T.R. Mendonça

8810

Computation of a Fokker-Planck-equation-based multi-scale model for complex flows using the IRBFN method C.-D. Tran, N. Mai-Duy, T. Tran-Cong

8821

Advances in ALE based fluid-structure interaction modeling for offshore engineering applications R.K. Jaiman

8835

Isogeometric analysis of viscous drop deformation in shear flow A.A. Joneidi, C.V. Verhoosel, P.D. Anderson

8846

   

ECCOMAS 2012 e-book | XXIX  

A neural network based elasto-plasticity material model T. Palau, A. Kuhn, S. Nogales, H. Böhm, A. Rauh

8861

A hybrid genetic algorithm for the multi-mode resource-constrained project scheduling J. Magalhaes-Mendes

8871

Problems of analysis of thin-walled structures - statics, free vibrations and sensitivity T. Mikulski, M. Kujawa, C. Szymczak

8883

Finite element simulation of the hygro-thermal response of wood during surface densification A. Genoese, A. Genoese, S. Fortino, L. Rautkari

8902

Multiscale numerical modeling of composite material: a combined FE-ANN approach D.P. Boso, M. Lefik, B. Schrefler

8912

Efficient response simulation by modal analysis of non-linear hysteretic structural systems H. Pradlwarter, C. Jäger, F.-J. Falkner

8927

Sensitivity analysis of uncertain factors in hierarchy model validation S. Yu, B. Xu, X. Liu, J. Mo

8939

Numerical study of microchannel heat sink performance using nanofluids Y.-T. Yang, S.-H. Lin, F.-H. Lai, Y.-T. Yang

8946

Modeling of silo discharge as strongly-coupled fluid-structure-system S. Reinstädler, D. Dinkler

8957

Contribution cancelled 8977 Microplane modeling of martensite reorientation in shape memory alloys R. Mehrabi, M. Kadkhodaei, S. Arbab Chirani

8986

Turbomachinery flow simulations with OpenFOAM M. Heinrich, A. Bäre, P. Hofemeier, R. Schwarze

8995

Anisotropic graded meshes and quasi-optimal rates of convergence for the FEM on polyhedral domains in 3D C. Bacuta, V. Nistor, L. Zikatanov

9003

Criterion for predicting direction of the crack in composites with random structure J. Podgórski

9015

X-FEM assisted simulation of ductile damage induced 2D crack propagation J.-P. Crété, P. Longere, J.-M. Cadou

9024

Static and dynamic analysis of journal bearing D. Shi, X. Shi, J. Han

9038

In situ measurements of anisotropic heat conductivity W.P. Adamczyk, T. Kruczek, R.A. Bialecki

9046

Simulation of microstructure, temperature and stress in wave soldering T. Mizui, T. Takaki

9052

MFS for modelling of inhomogeneous materials with large aspect ratio reinforcing elements V. Kompis, M. Zmindak, Z. Murcinkova

9062

Static recrystallization model using multi-phase-field method and finite element method based on crystal plasticity S. Chinzei, T. Takaki

9075

Phase-field simulations of crack propagation in brittle polycrystal K. Oshima, T. Takaki, M. Muramatsu

9085

Simulation of errors during the calibration of a magnetic and coordinate measuring machine (MCMM) H. Husstedt, U. Ausserlechner, M. Kaltenbacher

9096

Analysis of stiffened plates with different materials by the boundary element method G.R. Fernandes, J.R. Neto

9116

Mixing of electrokinetically-driven power-law fluids in a microchannel with rectangular blocks C.-C. Cho, C.-K. Chen

9127

Strong and weak points of recent indicators of chaos and order used in dynamical systems studies D.N. Deleanu

9138

Finite elements with non homogeneous embedded discontinuities L. Contrafatto, M. Cuomo, G.T. Di Venti

9152

Adsorption modeling in a honeycomb adsorber with the use of SLD adsorption model and 3D boundary element flow solver T. Stimec, M. Hribersek, J. Ravnik, S. Basic

9172

ECCOMAS 2012 e-book | XXX  

A second order sub mesh penalty method for incompressible flows on unstructured meshes A. Etcheverlepo, S. Vincent, J.-P. Caltagirone, D. Monfort, P. Angot

9183

A logarithmic strain decomposition for modeling of trabecular bone subjected to large compressive strains M. Horak, M. Jirasek, P. Zysset

9197

Eulerian numerical methods on unstructured meshes for the simulation of sprays within liquid rocket engines C. Le Touze, A. Murrone, E. Montreuil, H. Guillard

9210

Numerical modelling of interacting structures using a single mesh multivelocity strategy G. Folzan, P. Le Tallec, J.-P. Perlat

9227

Online training of data-driven POD-based surrogates for optimization M. Guénot, I. Lepot, C. Sainvitu, R. Filomeno Coelho

9242

Automation of stochastic finite element method T. Melink, J. Korelc

9262

Optimization methods applied to aerodynamic flow control J. Labroquère, R. Duvigneau

9279

Investigation of heat transfer characteristics for plate-fin heat sink H.-T. Chen, S.-T. Lai, L.J. Teseng, L.-Y. Haung,

9299

Magnetohydrodynamical modeling and simulations of electric arc extinction in a network P. Delmont, M. Torrilhon

9314

A new procedure to smooth and untangle meshes on parameterized surfaces A. Gargallo-Peiró, X. Roca, J. Sarrate

9331

Non-linear simplified approach for soil-structure interaction A. Romero, J. Maestre, P. Galvín

9344

Adjoint boundary conditions for turbomachinery flows C. Frey, A. Engels-Putzka, E. Kügeler

9360

Including the uncertainty of material properties in the structural modeling of flexible pavement D. Castillo, S. Caro

9380

Entropy conservative and entropy stable finite volume schemes for multi-dimensional conservation laws on unstructured meshes A. Madrane, U.S. Fjordholm, S. Mishra, E. Tadmor

9395