ECO FRIENDLY PAINTSspscoatings.co.in › wp-content › uploads › 2017 › 04 › SPS-Coatings-2017pdf.pdfequipped plant based in Auckland, New Zealand. Architectural The range of

ECO FRIENDLY PAINTS

36000 Colours Database

Computer Matching

Company Profile

Summary Sheet

Exit

Product Data Sheets

MSDS Sheets

COMMITMENT

innovative coating technologies to benefit its many customers and the wider environment. That meansoriginating a mix of products which are not only considerably safer than most currently on the marketbut which do exactly what individual customers require of them, and, in many instances, much more.

EXPERIENCE

SPS Coatings manages to do this by having people with a wealth of experience, product developmentskills and specialist product knowledge. The company�s key people have in-depth experience in painttechnology, research and development of special purpose resins, and property maintenance, as wellas expertise in highly specialised areas such as coatings for commercial and military aircraft, nuclearpower plants, racing craft, water-proofing buildings and high temperature and underwater coatings.Their skills have taken them to every corner of the globe.

HIGH QUALITY

Clearly, quality is another important consideration. A rigorous testing programme ensures that allproducts offered to the market have been thoroughly tested before commercial release. All SPSproducts are guaranteed to perform well within the company�s product specifications. SPS has a fully

The production facility is extremely flexible and can cater for long production runs as well asspecialised batches to meet specific customer requirements. Raw materials are sourced via integratedsupply arrangements from overseas and local suppliers. Particular care is taken to ensure that onlymaterials of the highest standard are used in the manufacturing process.

Corp

orat

e Pr

ofile

S P SS P S C O A T I N G S L I M I T E D

SPS is an abbreviation of Specialised Paint Systems and as such is committed to pioneering

SPS Coatings Ltd .www.spscoatings.com

New Zealand Sales Office: +64 9 920 6015 or +64 9 920 6016 +64 9 273 1240 [email protected] Phone Fax Email

equipped plant based in Auckland, New Zealand.

Architectural

The range of architectural productsencompasses both interior and exterior wherecoverage, colour range and durability areimportant. All products are based on the bestpossible acrylics for UV protection, waterresistance and long term mould and lichengrowth prevention. .... .... Application can be achieved by spraying,brushing or rollering and being non-solventpresents a minimum health hazard toapplicator or occupants.

Industrial

PROTECTION

A full range of anti-corrosive primer andtopcoats exist to resist the variousenvironmental conditions and the numeroustypes of corrosive substances. These productshave been formulated for performance whilestill achieving excellent coverage, and quickcuring times. Coats can be used in isolation or,as recommended, complete anticorrosivesystems.

CLEANERS

The key to a successful application is thepreparation. SPS has developed a range ofnon-solvent water based cleaners to assist inquickly achieving a clean substrate withoutputting the applicator in a hazardous toxic workenvironment or leaving behind a spoilingresidue.

PRODUCT SAFETY

SPS�s concentration on developing effective water-based coatings, as opposed to the more traditionalsolvent-based products, makes considerable sense. Not only does it reflect the increasing desireworldwide for safer, cleaner environments, it impacts directly on the personal health of users and theease with which coatings can be applied. SPS�s drive to produce VOC (Volatile Organic Compounds)levels well below those stipulated by international statutes and conventions will continue to be astrong focus for the company.

Material Safety Data SheetM S D SMaterial Safety Data SheetM S D S

P R O D U C T G R O U P S

Marine

PROTECTION

An extra level of resistance and durability hasbeen incorporated into the marine range. . These individual coats and coating systems areideal for above the waterline applications onpermanent coastal structures and seagoingvessels.

Key advantages of using these products:

- No requirement to grit blast down to class 2.5.Adhesion and protection is achieved with wire brush level preparation

- Quick drying- Not classified as dangerous good- Non flammable- Safe to handle - Can be stored onboard - Excellent adhesion and protection

CLEANERS

In addition to the range of general cleaners,specialty cleaners are available for aluminiumand fibreglass to produce a clean residue-freesubstrate.

S P S

Specialised

The range of specialised products includes:

FURNITURE

Quick drying, UV and bleed resistance lacquersfor all wood types with a wide range of tintsavailable. Transparent tints and direct-to-woodcoatings are an SPS speciality.

INDUSTRIAL

Metal-based lacquers are available in matt orgloss with a full range of tints that dry to a highquality finish.

FLOORING

Flooring systems are available to coversandstone, decorative concrete, and pre-finished wood.

TREATMENT

The range of fast acting non-solvent, waterbased treatment and cleaner products areeffective and safe to handle. After use,surfaces are simply washed down with waterto leave a clean surface for painting.

DEVELOPMENT

SPS will develop coating systems formanufacturers and applicators to meet specificprocess needs.KEY PEOPLKEY PEOPLE

COST-EFFECTIVENESS

If you add the fact that most of SPS�s coating solutions are also cost-effective ones and can in mostcases be tailored to customers� individual specifications, we believe the company has a very attractivepackage to offer.

S P S 1 3 0 1S P S 1 3 0 1S P S 1 3 0 1S P S 1 3 0 1

All our products are water-based, contain no mineral solvents and are VOC compliant for the year 2008 and beyond, a requirement under the Montreal Protocol

Prod

uct

Sum

mar

ry S

heet

ARCHITECTURAL

SPS 1306a Ideal primer for steel, galvanised or colorsteel roofs with surfacecorrosion. Can be coloured to match top coat

SPS 1306b Clear coat to seal porous concrete tiles before painting

SPS 1311a Acrylic Undercoat

SPS 1311b

Ideal as replacement for enamels, quick drying, good flow, easy to cleanand durable. Resistant to fungus, mould mildew etc. Excellent UVresistance. Available in Low Sheen and Semi-Gloss options

SPS 1317 Glaze Clear UV filter and sealer as final coat on concrete roof tiles

SPS 1318 For Tiles, Iron, Aluminium, Galvanised Iron roofs, Asbestos etc.Resistance to Fungus, Mildews, Mould and Moss. UV resistant

SPS 1319 For use on Roof, Tiles, Asbestos, Wood, Aluminium, Corrugated Iron,Colour Steel. Reduces heat absorption by 30%, ideal for factories,storage sheds etc.

SPS 1320 Highly durable acrylic coating for concrete floors

SPS 1322a,b Floor Lacquer Interior High viscosity, hard wearing system, ideal for parquet and pre-finished floorsIdeal replacement for epoxies and urethanes. Available in clear/tinted options

SPS 1327a Sand Stone Sealer Dead flat, chemical and scuff resistant coat for sandstone, slate,terracotta, terrazo

SPS 1327b Concrete Sealer Matt or gloss, seals and gives durable floor surface. Ideal over SPS 1320

Ideal for fences, stud farms etc, mould, mildew, moss and UV resistantAvailable clear or coloured

INDUSTRIAL

SPS 1301 Anti Corrosive Primer Primer for rusted or new metal surfaces: Aluminium, Steel and Galvanised Iron. Can be used on Tanks, Roofs, Steel Frames,Window/Door Frames, machinery and all engineering applicationsIt protects against rust formation

SPS 1302 Anti Corrosive Intermediate coat Extra protection mid coat for external use on superstructures, machinery etc.

SPS 1303 Anti Corrosive Top Coat Top coat, very hard with excellent UV and corrosion resistance

SPS 1301a Anti Corrosive Primer Plus Upgraded version of SPS1301 for coastal use or external harsh environment

SPS 1302a Anti Corrosive Intermediate Coat Plus Upgraded version of SPS 1302 for coastal use or external harsh environment

SPS 1303a Anti Corrosive Top Coat Plus Upgraded version of SPS 1303 for coastal use or external harsh environment

Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1PRODUCT SUMMARY SHEET S P S

Metal Primer

Concrete Tile Roof Primer

For priming/undercoating of Gib, wood, plaster. Excellent sanding properties

Multipurpose Sealer

SPS 1316 Trimkote

Roofkote

Insulating Roofkote

Floorkote

SPS 1351 Fencekote

SPS 1312 Ceiling White Gives a flat finish, hides imperfections, resistant to moss, mould andlichen growth.

For sealing MDF, wood etc, and over existing paint.

SPS 1313 Acrykote - Interior Low Sheen Good wash, scrub and burnish resistant. Most stains can be easily

Climatekote - Exterior Offers excellent protection against moss, mould, lichen growth, mildew,

blistering and flaking (gloss, semigloss)

SPS 1314

SPS 1315 Highbuildkote(Exterior on plaster)



salt spray and UV degradation. 10 yr* warranty against peeling,

removed. 5 yr* warranty.

Offers excellent protection against moss, mould, lichen growth, mildew,salt spray and UV degradation. 10 yr* warranty against peeling,blistering and flaking

SPS 1313b Acrykote - Platinum Resistant to household chemicals, non alcohol beverages etc, Excellent wash, Scrub and burnish resistance. 10 yr* warranty.

SPS 1313c Acrykote - Kitchenkote Withstands various condiments and food including oils, mustard etc. 7 yr* warranty.

MARINE

SPS 1342 Aluminium Cleaner Cleans dirt and oil deposits on aluminium surfaces easily

SPS 1343 Fibre Glass Cleaner Removes oxidised gel coat, and gives extremely smooth finish

SPS 1391 Aluminium Clear Coat Petro chemical resistant, and oxygen barrier to maintain aluminium

SPS 1392a,b Wood Lacquer Interior Premium wood coating, no sealer required, apply direct to substrateNo sanding required between coatsMinimal to no grain liftingIdeal to spray, brush or rollerNon yellowingExcellent chemical and water resistance

SPS 1396 Marine Anti Corrosive Primer High resistance anti-corrosive coating system for the marine environment

SPS 1397 Marine Anti Corrosive Intermediate Coat High resistant mid coat system for marine use

SPS 1398 Marine Anti Corrosive Top Coat High resistant mid coat system for marine use

SPS 1399 Marine Clear Coat Rugged marine clear coat usually applied as finishing coat overanti-corrosive coating

SPECIALISED

SPS 1321a-f Wood Lacquer Interior Premium wood coating, no sealer required, apply direct to substrateSPS 1321g-l Wood Lacquer Exterior Excellent transparent tints available

No sanding required between coatsMinimal to no grain liftingIdeal to spray, brush or rollerExterior system has extra UV filtersNon yellowingExcellent chemical and water resistance

SPS 1324 High Build Acrylic Clear Coat Non yellowing, ultra clear thick coat for protecting bar tops etc.Scratches can be buffed and polished out

SPS 1325 Medicoat High gloss clear coat, to go over acrylic or acrylic plus coating,or existing paint. Hard durable surface with Anti-static closed poretechnology to give hygienic finish. Ideal for food prep areas also

SPS 1326 Anti-Graffiti Clear Coat Clear coat for graffiti protection

SPS 1348 Graffiti Ink Remover Non solvent remover to be used in conjunction with Anti-Graffiti Clear Coat

SPS 1349 TTC Tile, Mould/Moss Treatment For treatment of concrete tiles prior to application of coatings, - killsmoss, mould, lichen etc.

SPS 1350 PPC Mould/Moss Treatment For general use on all surfaces - kills moss, mould, lichen etc.

SPS 1371 Plast �O� Fix Construction adhesive and cement based waterproof system for balconies, terraces, cellars and ceramic tiles

Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1S P S

SPS 1305 Metal Top Coat Ideal for structural steel, coating over zinc spray, galvanised steel etc.

SPS 1329a Metal Clear Coat Standard To achieve a high gloss finish over the anti corrosive systemAlso provides a total oxygen barrier to control corrosion

SPS 1329b Metal Clear Coat Premium An uprated version of SPS 1329a to be resistant to diesel, hydraulic oils etc.

SPS 1345 Metal Cleaner To clean stainless steel and ferrous metal surfaces quickly. Removes rust

SPS 1346 Concrete Cleaner Will not fade oxides in coloured concrete or burn plants etc when rinsed off

SPS 1361 Road Marking Paint For use as Traffic Marking on Road surfaces, Curbs, Guide Posts, Airfields,Runways, Airport Parking, Public Parking etc.Can be applied directly to concrete

INDUSTRIAL - contd.

* conditions apply

SPS 1352 Water Repellent Membrane Ideal for use on Terraces, Balconies , Bathrooms , Cellars , interior and exterior walls.

Architectural

Industrial

Marine

Specialised

Product Data Sheets

A durable, non-solvent, water-based, architectural coating with a VOC level well below the 2005 Montreal Protocol Guidelines

Prod

uct D

ata

Shee

t

SELECTION DATA

Type Standard non-solvent, water-based acrylic roof primer

Recommended Uses As a primer for steel, aluminium, and galvanised iron roofs

Not Recommended For Marine or industrial anti-corrosive applications

Resistant to UV, moss, mould, lichen, growth and mildew

Thermal Resistance Continuous Surface: 80°C Non-continuous: 120°CFire hazard: Nil

Compatible Coatings Can go over existing colour steel

Solids 50% +/- 2%

VOC 100 - 120g per ltr

Specific Gravity 1.250 +/- 0.005

Recommended Dry Film Thickness (per coat)

Coverage 8 - 10 sqm/ltr

Dry Time (@18°C) Touch dry: 30 minsRecoat: 2 hoursHard dry: 4 hours

Shelf Life 1 year if kept sealed and under cover in cool, dry environmentDo not allow to freeze

Transportation Not classified as a dangerous good, safe to transport by land, sea or air usingstandard best practice precautions

Pack Size 10, 100, 200, 1000 litres

Colour Std red, grey, black. All colours are colourfast

1 3 0 6 AS P SS P SS P SArchitectural Metal Primer

50 microns per coat



APPLICATION

Key Advantages Non-hazardous to environment and the applicator

Can be used in overcast conditions

Easy to apply

Very good flow and levelling

Quick drying

Safety This product contains no solvents and is non-toxic, however it is recommendedthat a dust mask be used to protect lungs from atomised material when spraying

Surface Preparation Ensure primed surface is clean and dry, if necessary degrease with cleaner(SPS 1345) rinse down with water and wait until dry before applying

Conditions Do not apply in temperatures below 5°C or above 50°C

Spray:Conventional or HVLP Spray Use approx 1.6mm fluid tip and appropriate air cap. It should be held

approximately 30 to 35 cms at right angles from the surface

Airless Pump ratio: 30:1 (min)

GPM Output: 3.0 (min)

Tip Size: 0.013 - 0.017�

Output PSI: 1800 - 2300

Filter Size: 60 - 100 mesh

Brush/Roller Can be brushed or rollered if spraying is not feasibleUse a short-nap mohair roller for roller application

This document does not express or imply any product guarantee or warrantyFor application specific product guarantees or warranties please contact our Technical Manager

Prod

uct D

ata

Shee

t

Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1S P S 1 3 0 6 A


Prod

uct D

ata

Shee

t

SELECTION DATA

Type Non-solvent, water-based acrylic roof primer

Recommended Uses As a primer for concrete tile roofs

Not Recommended For Metal roofs, marine or industrial anti-corrosive applications



Compatible Coatings n/a

Solids 30% +/- 1%





Dry Time (@18°C) Touch dry: 45 minsRecoat: 1 hourHard dry: 4 hours




Colour Clear

Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Architectural Concrete Tile Roof Primer S P S 1 3 0 6 B

50 microns per coat



APPLICATION



Easy to apply


Quick drying


Surface Preparation Clean tiles with TTC. Leave for 3 - 4 days, waterblast and apply SPS1306B






Tip Size: 0.013 - 0.017�

Output PSI: 1800 - 2300




Prod

uct D

ata

Shee

t

Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1S P S 1 3 0 6 B


Prod

uct D

ata

Shee

t

SELECTION DATA

Type A water-based, non-solvent acrylic sealer coating

Recommended Uses

Not Recommended For


Compatible Coatings Will cover alkyds, enamels and other acrylics if necessary

Solids


Specific Gravity



Dry Time (@18°C)Recoat: 2 hoursHard dry: 1 hourDrying times may vary with atmospheric conditions



Pack Size 10 ltrs standard

Colour White, off white

S P S 1 3 0 1S P S 1 3 0 1S P S 1 3 0 1S P S 1 3 0 1S P S 1 3 1 1 AArchitectural Undercoat (Easy Sanding)

Roofs or concrete floors & exterior application

65% +/- 1%

50 microns per coat

Touch dry: 30 mins



Ideal for all interior architectural applications

1.56 +/- 0.01

APPLICATION


Easy to apply

Self priming

Excellent opacity


Quick drying

Safety This product contains no solvents and is non-toxic, however it is recommendedthat a dust mask is used

Surface Preparation Apply on clean, dry substrates


Spray:Airless Pump ratio: 30:1 (min)


Material Hose: 3/8� I.D (min)

Tip Size: 0.013 - 0.021�

Output PSI: 2100 - 2300


Brush/Roller Brushing with full strokes, using a natural bristle brushUse a short nap mohair roller for roller application


Prod

uct D

ata

Shee

t


Non-solvent, water-based, specialised coating with a VOC level well below the 2005 Montreal Protocol Guidelines

Prod

uct D

ata

Shee

t

SELECTION DATA

Type A water based non-solvent acrylic sealer

Recommended Uses Ideal for all interior/exterior industrial wood and wood based substratesi.e. wood chipboard, hard board, MDF, plywood etc.

Not Recommended For Roofs or concrete floors

Compatible Coatings Will seal alkyds, enamels and other acrylics if necessary

Solids


Specific Gravity



Dry Time (@18°C)Recoat: 1 hoursHard dry: 2 hoursDrying times may vary with atmospheric conditions




Colour

S P S 1 3 0 1S P S 1 3 0 1S P S 1 3 0 1S P S 1 3 0 1S P S 1 3 1 1 BArchitectural Acrylic Multipurpose Sealer

60% +/- 1%

1.50 +/- 0.01

50 microns per coat

Touch dry: 30 mins



White, Off white

APPLICATION


Easy to apply


Quick drying


Surface Preparation Apply on clean dry substrates





Tip Size: 0.013 - 0.021�

Output PSI: 2100 - 2300


Brush/Roller Brushing is only recommended to touch up small areasApply with full strokes, using a natural bristle brushUse a short-nap mohair roller for roller application


Prod

uct D

ata

Shee

t



Prod

uct D

ata

Shee

t

SELECTION DATA

Type

Recommended Uses

Not Recommended For


Compatible Coatings Will cover alkyds, enamels and other acrylics

Solids


Specific Gravity


Coverage

Dry Time (@18°C)Recoat: 1 hourHard dry: 2 hoursDrying times may vary with atmospheric conditions




Colour All colours available as either matt, satin, semi-gloss or gloss

S P SArchitectural Acrylic Ceiling White

A water-based non-solvent acrylic flat finish

Ideal for all interior ceiling

Walls, Roofs, concrete floors and exterior applications

55% +/- 1%

1.350 +/- 0.01

10 - 12 sqm/ltr

50 microns per coat

Touch dry: 30 mins

1 3 1 2



APPLICATION



Easy to apply

Self Priming

Excellent opacity


Quick drying

No sanding required between coats

Safety This product contains no solvents and is non-toxic, however it is recommended that a dust mask be used to protect lungs from atomised material when spraying

Surface Preparation Apply on clean SPS 1311




Material Hose: 3/8� I.D. (min)

Tip Size: 0.013 - 0.021�

Output PSI: 1800 - 2300


Brush/Roller Brush with small strokes, using a natural bristle brushUse a short-nap mohair roller for roller application


Prod

uct D

ata

Shee

t

S P S 1 3 1 2


Prod

uct D

ata

Shee

t

SELECTION DATA

Type

Recommended Uses

Not Recommended For



Solids


Specific Gravity


Coverage






S P S

10 - 12 sqm/ltr

50 microns per coat

Touch dry: 30 mins

1 3 1 3Architectural Acrylic Interior (Low Sheen)-Acrykote

A water-based non-solvent acrylic low sheen

Ideal for all interior walls

Roofs, concrete floors and exterior applications

52% +/- 1%

1.285 +/- 0.01



APPLICATION



Easy to apply

Self Priming

Excellent opacity


Quick drying








Tip Size: 0.013 - 0.021�

Output PSI: 1800 - 2300




Prod

uct D

ata

Shee

t

S P S 1 3 1 3

Prod

uct D

ata

Shee

t

SELECTION DATA

Type

Recommended Uses

Not Recommended For

Resistant toHousehold chemicals, alcoholic and non alcoholic beverages etc. UV, moss, mould, lichen, growth and mildew


Solids


Specific Gravity


Coverage






10 - 12 sqm/ltr

50 microns per coat

Touch dry: 30 mins




52% +/- 1%

1.285 +/- 0.01



Architectural– Acrykote Platinum S P S 1 3 1 3 b A durable, non-solvent, water-based, architectural coating with a VOC level well below the 2005 Montreal Protocol Guidelines

APPLICATION



Easy to apply

Self Priming

Excellent opacity


Quick drying








Tip Size: 0.013 - 0.021�

Output PSI: 1800 - 2300




Prod

uct D

ata

Shee

t

S P S 1 3 1 3 b

Prod

uct D

ata

Shee

t

SELECTION DATA

Type

Recommended Uses

Not Recommended For

Resistant to Household chemicals, alcoholic and non alcoholic beverages condiments, food imbktchmf Oils etc. UV, moss, mould, lichen, growth and mildew


Solids


Specific Gravity


Coverage






10 - 12 sqm/ltr

50 microns per coat

Touch dry: 30 mins




52% +/- 1%

1.285 +/- 0.01



Architectural– Kitchenkote S P S 1 3 1 3 c A durable, non-solvent, water-based, architectural coating with a VOC level well below the 2005 Montreal Protocol Guidelines

APPLICATION



Easy to apply

Self Priming

Excellent opacity


Quick drying








Tip Size: 0.013 - 0.021�

Output PSI: 1800 - 2300




Prod

uct D

ata

Shee

t

S P S 1 3 1 3 c


Prod

uct D

ata

Shee

t

SELECTION DATA

Type

Recommended Uses

Not Recommended For



Solids


Specific Gravity


Coverage






S P S

50 microns per coat

Touch dry: 30 mins

52% +/- 1%

1 41 3Architectural Acrylic Exterior - Climatekote

1.20 +/- 0.01

14 - 16 sqm/ltr



Ideal for all exterior architectural applications

Roofs or concrete floors etc.

A water-based non-solvent acrylic coating in gloss and semigloss options

APPLICATION



Easy to apply

Self Priming

Excellent opacity


Quick drying








Tip Size: 0.013 - 0.021�

Output PSI: 1800 - 2300




Prod

uct D

ata

Shee

t

S P S 1 41 3


Prod

uct D

ata

Shee

t

SELECTION DATA

Type

Recommended Uses

Not Recommended For



Solids


Specific Gravity


Coverage






S P S

50 microns per coat

Touch dry: 30 mins

1 3

14 - 16 sqm/ltr

51Architectural Acrylic Coating - High Build

A water-based non-solvent acrylic coating

Ideal for all exterior architectural applications (eg. plaster, etc.)

Roofs or concrete floors

70% +/- 1%

1.30 +/- 0.01



APPLICATION



Easy to apply

Self Priming

Excellent opacity


Quick drying








Tip Size: 0.013 - 0.021�

Output PSI: 1800 - 2300




Prod

uct D

ata

Shee

t

S P S 1 3 51


Prod

uct D

ata

Shee

t

SELECTION DATA

Type A water-based, non solvent acrylic coating replacing enamels in matt andsemi-gloss options

Recommended Uses Ideal for all interior/exterior architectural applications on windows anddoor frames

Not Recommended For Roofs and concrete floors


Solids 52% +/- 1%





Dry Time (@18°C)Recoat: 1 hourHard Dry: 1 hourDrying times may vary with atmospheric conditions



Pack Size

Colour

Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1

S P S 1 3 1 61111Architectural Acrylic Trimkote

50 microns per coat

Touch dry: 30 mins



Approval Independently tested in a weather-o-meter

Chemical Resistance Good resistance to household chemicals, non-alcoholic beverages, red wine,white wine, beer, powder coffee, black tea, blackcurrant, juice, condensed milk,butter, olive oil, mustard, common salt onions, acetic acid, and citric acid

Thermal Resistance Spread of Flame Index (SFI) 8Smoke Developed index (SDI) 4 Continuous surface: 100°CNon-continuous: 150°C

4 ltrs standard

Available in all colours

APPLICATION


Easy to apply

Self priming

Excellent opacity

Quick drying

No sanding between coats required


Surface Preparation




Tip Size: 0.013 - 0.021�

Output PSI: 2100 - 2300


Brush/Roller Brush with full strokes, using a natural bristle brushUse a short-nap mohair roller for roller application


Prod

uct D

ata

Shee

t

Material Safety Data SheetM S D SMaterial Safety Data SheetM S D SMaterial Safety Data SheetM S D SMaterial Safety Data SheetM S D S S PS 1 3 1 6

Apply on SPS1311B


Prod

uct D

ata

Shee

t

SELECTION DATA

Type A water-based, non-solvent acrylic coating for roofs etc.

Recommended Uses Ideal for all architectural applications on roofs

Not Recommended For Roofs or concrete floors



Solids 15% +/- 1%



Recommended Dry Film Thickness (per coat) 15 microns per coat


Dry Time (@18°C) Touch dry: 20 minsRecoat: 2 hoursHard dry: 4 hoursDrying times may vary with atmospheric conditions



Pack Size 10 ltrs

Colour Clear

Architectural Acrylic Glaze S P S 1 3 1 7



APPLICATION


Easy to apply


Quick drying


UV protectant


Surface Preparation Apply on SPS 1318




Material Hose: 3/8” I.D (min)

Tip Size: 0.013 - 0.021”

Output PSI: 2100 - 2300


Brush/Roller Brushing with full strokes, using a natural bristle brushUse a short nap mohair roller for roller application


Prod

uct D

ata

Shee

t

S P S 1 3 1 7


Prod

uct D

ata

Shee

t

SELECTION DATA

Type A water-based acrylic coating

Recommended Uses For tiles, steel, galvanised iron, asbestos, wood, aluminium



Compatible Coatings Will perform over acrylic, urethane, epoxy, powder coating and others whenlightly sanded

Solids 45% +/- 1%









Colour 30 colours. All colours are colourfast

Architectural Roof Top Coat S P S 1 3 1 8



APPLICATION



Easy to apply


Quick drying


Surface Preparation To be applied over 1306A, 1306B






Tip Size: 0.013 - 0.017�

Output PSI: 1800 - 2300




Prod

uct D

ata

Shee

t

S P S 1 3 1 8

A high performance, water-based, architectural coating offering heat and sound insulation

Prod

uct D

ata

Shee

t

SELECTION DATA

Type A water-based flexible heat and sound insulating coating

Recommended Uses In situations where noise and/or heat reduction is required

Not Recommended For



Solids 45% +/- 1%



Recommended Dry Film Thickness (per coat) 40 microns


Dry Time (@18°C) Touch dry: 45 minsRecoat 1 hourHard dry: 4 hours



Pack Size 10 ltrs

Colour 30 shades. All colours are colourfast

Architectural Insulating Roof Top Coat S P S 1 3 1 9



APPLICATION

Key Advantages Reduces heat by 40%

Non-hazardous to environment and the applicator


Easy to apply


Quick drying


Surface Preparation To be used over SPS 1306A,1306B


Spray:Conventional Use a 3/8" minimum I.D material hose, 0.043" I.D. fluid tip and appropriate

air cap. It should be held approximately 30 to 35 cms at right anglesfrom the surface




Tip Size: 0.013 - 0.015�

Output PSI: 2100 - 2300


Brush/Roller Brush with full strokes, using a natural bristle brushUse a short nap mohair roller for roller application


Prod

uct D

ata

Shee

t

S P S 1 3 1 9

A high performance, water-based, architectural coating for concrete floors

Prod

uct D

ata

Shee

t

SELECTION DATA


Recommended Uses On concrete floors

Not Recommended For Underwater application


Thermal Resistance Continuous Surface: 10-60°CFire hazard: Nil


Solids 45% +/- 1%



Recommended Dry Film Thickness (per coat) 40 microns





Pack Size 10 ltrs

Colour 30 shades. All colours are colourfast

Architectural Concrete Paint S P S 1 3 2 0



APPLICATION


Surface Preparation The surface should be cleaned thoroughly before using the paint. use SPSconcrete cleaner to clean the surface


Spray:Conventional Use a 3/8" minimum I.D material hose, 0.043" I.D. fluid tip and appropriate

air cap. It should be held approximately 30 to 35 cms at right anglesfrom the surface




Tip Size: 0.013 - 0.015�

Output PSI: 2100 - 2300


Brush/Roller Brush with full strokes, using a natural bristle brushUse a short nap mohair roller for roller application


Prod

uct D

ata

Shee

t

S P S 1 3 2 0

Robust, non-solvent, water-based, interior floor lacquer with a VOC level well below the 2005 Montreal Protocol Guidelines

Prod

uct D

ata

Shee

t

SELECTION DATA

Type A premium quality floor lacquer in clear or tinted options

Recommended Uses For internal application on wood, wood chipboard, hard board, MDF, plywoodslate, concrete, terracotta tiles and painted surfaces

Not Recommended For Exterior use

Chemical Resistance Good resistance to household chemicals,non-alcoholic beverages, red wine,white wine, beer, powder coffee, black tea, blackcurrant, juice, condensed milk,butter, olive oil, mustard, common salt onions, acetic acid, and citric acid

Thermal Resistance Spread of Flame Index (SFI) 8Smoke Developed Index (SDI) 4 Continuous surface: 100°CNon-continuous: 150°C

Compatible Coatings Can cover acrylics, enamels and alkyds as a protective coating

Solids 35% +/- 1%





Dry Time (@18°C) 1 hourRecoat: 2 hoursFull Cure: 12 hoursDrying times may vary with atmospheric conditions



Pack Size 10 ltrs

Colour Either clear or SPS coatings transparent tint range. Available in matt, satin,semi gloss, gloss

Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Architectural Floor Lacquer Interior S P S 1 3 2 2 A-B



APPLICATION


Easy to apply, low odour

No sealer required can be applied directly to substrate

Minimal grain lift

Sands well, no clogging of paper

Quick drying

Non yellowing with UV protection to substrate

Ideal for recoating existing pre finished floors (eg Tarkett parquet flooring)

Safety This product contains no solvents and is non-toxic, however it is recommendedthat a dust mask be used to protect lungs from atomised spraying

Surface Preparation It is recommended to use as finer paper as is practical to achieve a highgrade finish. No sanding between coats is required, but if there is dustparticles etc in the film, sand with a 220 grit paper, ur use a green 3M padon a buffing machine


Spray:Conventional/HVLP Use approx 0.9 to 1.2mm fluid tip and appropriate aircap for clear lacquer

Coloured lacquers use approx 1.0 to 1.4mm fluid tip and appropriate air capIt should be held approximately 30 to 35 cms at right angles to the surface

Airless Tip Size: 0.009 - 0.013�

Output PSI: 1800 - 2300


Brush/Roller Brushing is only recommended to touch up small areasApply with small strokes, using a natural bristle brushUse a 8mm-nap mohair roller for roller application and use floodcoating technique


Prod

uct D

ata

Shee

t

Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1S P S 1 3 2 2 A-B

Robust, non-solvent, water-based, interior, exterior sealer/topcoat with a VOC level well below the 2005 Montreal Protocol Guidelines

Prod

uct D

ata

Shee

t

SELECTION DATA

Type A premium quality, water-based acrylic sandstone sealer/topcoat

Recommended Uses For application on sandstone, slate and terracotta tiles

Not Recommended For Concrete

Chemical Resistance Good resistance to domestic chemicals, non-alcoholic beverages, red wine,white wine, beer, powder coffee, black tea, blackcurrant, juice, condensed milk,butter, olive oil, mustard, common salt onions, acetic acid, and citric acid


Compatible Coatings Will perform over acrylics

Solids 35% +/- 1%





Dry Time (@18°C) Touch Dry: 15 minsRecoat: 30 minsHard Dry: 2 hoursDrying time may vary according with atmospheric conditions



Pack Size 10 ltrs

Colour Clear in matt or semi-gloss

Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Architectural Sand Stone Sealer S P S 1 3 2 7 A



APPLICATION

Key Advantages Non hazardous to the environment and applicator


Easy to apply


Does not soften or absorb water

Quick drying

Non yellowing


Surface Preparation Water blast surface, ensure fully dry before application


Brush/Roller Brushing is only recommended to touch up small areasUse a medium -nap mohair roller for roller applicationThin first coat by 10%, and apply 2nd coat direct


Prod

uct D

ata

Shee

t


Robust, non-solvent, water-based, interior, exterior sealer/topcoat with a VOC level well below the 2005 Montreal Protocol Guidelines

Prod

uct D

ata

Shee

t

SELECTION DATA

Type A premium quality, water-based acrylic concrete sealer/topcoat

Recommended Uses For application on concrete or plaster

Not Recommended For Tiles



Compatible Coatings Will perform over acrylics, alkyds and epoxies when sanded

Solids 35% +/- 1%





Dry Time (@18°C) Touch Dry: 15 minsRecoat: 30 minsHard Dry: 2 hoursDrying time may vary according with atmospheric conditions



Pack Size 10 ltrs

Colour Clear in matt or semi-gloss

Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Architectural Concrete Sealer S P S 1 3 2 7 B



APPLICATION



Easy to apply


Does not soften or absorb water

Quick drying

Non yellowing


Surface Preparation Use SPS 1320






Tip Size: 0.013 - 0.017�

Output PSI: 1800 - 2300


Brush/Roller Brushing is only recommended to touch up small areasUse a medium -nap mohair roller for roller applicationThin first coat by 10%, and apply 2nd coat direct


Prod

uct D

ata

Shee

t



Prod

uct D

ata

Shee

t

SELECTION DATA

Type Non-solvent, water-based acrylic stains

Recommended Uses Ideal for all interior/exterior architectural applications where a simple stain isneeded to give even colour and base protection to wooden substrate

Not Recommended For Use as a standard architectural acrylic coating



Solids 28% +/- 1%





Dry Time (@18°C) Touch dry: 20 minsRecoat: 1 hourDrying times may vary with atmospheric conditions





S P S 1 3 0 1S P S 1 3 0 1S P S 1 3 0 1S P S 1 3 0 1

Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1

S P S 1 3 0 1S P S 1 3 0 1S P S 1 3 0 1S P S 1 3 0 1S P S 1 3 5 1 A Architectural Acrylic Fencekote



APPLICATION


Easy to apply

Self priming

Excellent opacity

Quick drying







Tip Size: 0.013 - 0.021�

Output PSI: 2100 - 2300




Prod

uct D

ata

Shee

t

Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1S P S 1 3 5 1 A-B

A durable, non-solvent, water-based, industrial coating with a VOC level well below the 2005 Montreal Protocol Guidelines

Prod

uct D

ata

Shee

t

SELECTION DATA

Type A modified water-based anti-corrosive acrylic primer

Recommended Uses A primer for rusted or new metal surfaces: steel, aluminium and galvanizediron. Can be used on tanks, roofs, steel frames, window/doorframes,machinery and all engineering applications. It protects against rust formation

Not Recommended For Marine or permanent immersion environments

Approvals Meets or exceeds national and international performance standardsIndependently tested by Pacific Aero Space Corporation for corrosive protection

Chemical ResistanceVery Good resistance to splash and spillage of: Acids

Alkalies

Solvents

Fuels

Excellent resistance to splash and spillage of: Salt

Water


Compatible Coatings Will perform over acrylic, urethane, epoxy, powder coating and others when lightly sanded

Solids 61% +/- 1%









Colour Std red, grey, black, and yellow. All colours are colourfast

Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Industrial Anti-Corrosive Primer S P S 1 3 0 1

60 microns per coat



APPLICATION


Can be used in confined spaces


Easy to apply


Quick drying

Minimum damage from site welding


Surface Preparation:Old Metal Remove all loose, flaking rust or existing paint by wire brush

Degrease with metal cleaner (SPS 1345) if necessary

New Metal Degrease with metal cleaner (SPS 1345), rinse with clean waterthen thoroughly dry before painting the surface






Tip Size: 0.013 - 0.017�

Output PSI: 1800 - 2300




Prod

uct D

ata

Shee

t

Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1S P S 1 3 0 1


Prod

uct D

ata

Shee

t

SELECTION DATA

Type A modified water-based anti-corrosive acrylic top coat

Recommended Uses For use over anti-corrosive primer or intermediate on rusted or new metalsurfaces: steel, aluminium and galvanized iron. Can be used on tanks, roofs,steel frames, window/doorframes, machinery and all engineeringapplications. It protects against rust formation




Alkalies

Solvents

Fuels


Water



Solids 61% +/- 1%










Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Industrial Anti-Corrosive Intermediate Coat S P S 1 3 0 2

60 microns per coat



APPLICATION




Easy to apply


Quick drying



Surface Preparation To be applied over SPS 1301






Tip Size: 0.013 - 0.017�

Output PSI: 1800 - 2300




Prod

uct D

ata

Shee

t



Prod

uct D

ata

Shee

t

SELECTION DATA

Type A modified water-based anti-corrosive acrylic intermediate coat

Recommended Uses For use over anti-corrosive primer on rusted or new metal surfaces:steel, aluminium and galvanized iron. Can be used on tanks, roofs,steel frames, window/doorframes, machinery and all engineeringapplications. It protects against rust formation




Alkalies

Solvents

Fuels


Water


Compatible Coatings Will perform over acrylic, urethane, epoxy, powder coatings and others when lightly sanded. Normally covered with an SPS anti-corrosive topcoator metal lacquer

Solids 61% +/- 1%



Recommended Dry Film Thickness (per coat)30 microns with topcoat






Colour Std Red, grey, black, and yellow. All colours are colourfast

Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Industrial Anti-Corrosive Top Coat S P S 1 3 0 3

60 microns without topcoat



APPLICATION




Easy to apply


Quick drying



Surface Preparation To be applied over SPS1301 and 1302






Tip Size: 0.013 - 0.017�

Output PSI: 1800 - 2300




Prod

uct D

ata

Shee

t


High protection, non-solvent, water-based, industrial coating with a VOC level well below the 2005 Montreal Protocol Guidelines

Prod

uct D

ata

Shee

t

SELECTION DATA

Type A modified water-based anti-corrosive acrylic premium primer

Recommended Uses Ideal for very harsh environments. For rusted or new metal surfaces: steel,aluminium and galvanized iron. Can be used on tanks, roofs, steel frames,window/doorframes, machinery and all engineering applicationsIt protects against rust formation



Chemical ResistanceExcellent resistance to splash and spillage of: Acids

Alkalies

Solvents

Fuels

Salt

Water


Compatible Coatings Will perform over acrylic, urethane, epoxy, powder coating and others when lightly sanded. Normally covered with an SPS anti-corrosive topcoator metal lacquer

Solids 61% +/- 1%










Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Industrial Anti-Corrosive Primer Plus S P S 1 3 0 1 A

60 microns per coat



APPLICATION




Easy to apply


Quick drying




Degrease with marine metal cleaner (SPS 1345) if necessary

New Metal Degrease with marine metal cleaner (SPS 1345), rinse with clean waterthen thoroughly dry before painting the surface






Tip Size: 0.013 - 0.017�

Output PSI: 1800 - 2300




Prod

uct D

ata

Shee

t



Prod

uct D

ata

Shee

t

SELECTION DATA

Type A modified water-based anti-corrosive acrylic premium intermediate coat





Alkalies

Solvents

Fuels

Salt

Water


Compatible Coatings Will perform over acrylic, urethane, epoxy, powder coating and others when lightly sanded. Normally covered with an SPS anti-corrosive topcoator metal lacquer

Solids 61% +/- 1%










Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Industrial Anti-Corrosive Intermediate Coat Plus S P S 1 3 0 2 A

60 microns without topcoat



APPLICATION




Easy to apply


Quick drying



Surface Preparation To be applied over SPS 1301A






Tip Size: 0.013 - 0.017�

Output PSI: 1800 - 2300




Prod

uct D

ata

Shee

t



Prod

uct D

ata

Shee

t

SELECTION DATA

Type A modified water-based anti-corrosive acrylic premium top coat





Alkalies

Solvents

Fuels

Salt

Water



Solids 61% +/- 1%










Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Industrial Anti-Corrosive Top Coat Plus S P S 1 3 0 3 A

60 microns per coat



APPLICATION




Easy to apply


Quick drying



Surface Preparation To be applied over 1301A and 1302A






Tip Size: 0.013 - 0.017�

Output PSI: 1800 - 2300




Prod

uct D

ata

Shee

t



Prod

uct D

ata

Shee

t

SELECTION DATA

Type A water based non-toxic acrylic metal top coating

Recommended Uses SPS 1305 is a general-purpose topcoat for structural and fabricated steel, galvanized iron, aluminium and zinc metal spray. Ideal for industrial and farmapplications where a tough resistant finishing coat is required. When used inan exposed environment a suitable primer coating is essential

Not Recommended For Marine environment or permanent

Approvals Meets or exceeds national and international performance standards

Chemical ResistanceGood resistance to splash and spillage of: Salt

Water



Solids 55% +/- 1%










Industrial Metal Top Coat S P S 1 3 0 5



60 microns per coat

APPLICATION




Easy to apply


Quick drying



Surface Preparation Ensure primed surface is clean and dry, if necessary degrease with cleaner(SPS 1345) rinse down with water and wait until dry before applying






Tip Size: 0.013 - 0.017�

Output PSI: 1800 - 2300




Prod

uct D

ata

Shee

t

S P S 1 3 0 5

A durable, non-solvent, water-based, industrial top coat with a VOC level well below the 2005 Montreal Protocol Guidelines

Prod

uct D

ata

Shee

t

SELECTION DATA

Type A premium metal finish coat with strong resistance properties

Recommended Uses As a topcoat on metal, where durability and resistance to solvents andchemicals is required. Normally use over anticorrosive coating to achieve asmart gloss finish i.e. petrol stations

Not Recommended For Use as a primer coat

Chemical ResistanceGood resistance to splash and spillage of: Acids

Alkalies

Solvents


Water



Solids 35% +/- 1%





Dry Time (@18°C) 15 minsDrying time may vary with atmospheric conditions



Pack Size 10 ltrs

Colour Clear

Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Industrial Metal Clear Coat Standard S P S 1 3 2 9 A



APPLICATION




Easy to apply


Quick drying


Surface Preparation To be applied over SPS 1303, 1303A


Spray:Conventional or HVLP Spray Use a 3/8" minimum I.D material hose, 0.043" I.D. fluid tip and appropriate air cap

It should be held approximately 30 to 35 cms at right angles from the surface




Tip Size: 0.013 - 0.015�

Output PSI: 2100 - 2300




Prod

uct D

ata

Shee

t


A durable, non-solvent, water-based, industrial top coat with a VOC level well below the 2005 Montreal Protocol Guidelines

Prod

uct D

ata

Shee

t

SELECTION DATA

Type A premium metal finish coat with strong resistance properties

Recommended Uses As a topcoat on metal, where durability and resistance to solvents chemicalsand fuels is required. Normally used over anticorrosive coatings in harshenvironment to achieve a smart gloss finish i.e. petrol stations



Alkalies

Solvents

Fuels

Salt

Water



Solids 35% +/- 1%





Dry Time (@18°C) 15 minsDrying time may vary with atmospheric conditions



Pack Size 10 ltrs

Colour Clear

Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Industrial Metal Clear Coat Premium S P S 1 3 2 9 B



APPLICATION




Easy to apply


Quick drying

Safety This product contains no solvents and is non-toxic, however it is recommended that a dust mask is used

Surface Preparation To be applied over SPS 1303, 1303A


Spray:Conventional or HVLP Spray Use a 3/8" minimum I.D material hose, 0.043" I.D. fluid tip and appropriate air cap

It should be held approximately 30 to 35 cms at right angles from the surface




Tip Size: 0.013 - 0.015�

Output PSI: 2100 - 2300




Prod

uct D

ata

Shee

t


Non-solvent metal cleaner concentrate

Prod

uct D

ata

Shee

t

DESCRIPTION

Premium quality metal cleaner

COLOUR

Light Blue

ADVANTAGES

Easy to useNon-scratchingLeaves substrate very smoothNo chemical reactionNo solvent so can be rinsed safely with waterNo toxic fumes

APPLICATION

Apply with brush (can be sprayed) agitate into the surface. Do not allow to dry, rinse well with water to clean

SAFETY

Wear neoprene gloves, rinse well with water after use. This is an aggressive cleaner, if exposed to skin or eyes, flush immediatelywith clean water

TECHNICAL DATA

Pack Size 10 ltrs

No. of components 1

Shelf Life 1 year

Application Temperature 5°C - 50°C

Toxicity Nil

Fire Hazard None

Storage Undercover in cool and dry conditions. Do not allow to freeze

This document does not express or imply any product guarantee or warranty

Industrial Metal Cleaner S P S 1 3 4 5



Non-solvent concrete cleaner concentrate

Prod

uct D

ata

Shee

t

DESCRIPTION

Premium quality concrete cleaner

COLOUR

Light Blue

ADVANTAGES

Easy to useNo chemical reactionNo solvent so can be rinsed safelyNo toxic fumes

APPLICATION


SAFETY

Wear neoprene gloves, rinse well with water after use. This is an aggressive cleaner, if exposed to skin or eyes, flush immediatelywith clean water

TECHNICAL DATA

Pack Size 10 ltrs

No. of components 1

Shelf Life 1 year


Toxicity Nil

Fire Hazard None


Industrial Concrete Cleaner S P S 1 3 4 6




A rugged quick drying road marking paint with a VOC level well below the 2005 Montreal Protocol Guidelines

Prod

uct D

ata

Shee

t

SELECTION DATA

Type A premium quality quick-drying, water-based acrylic for use as traffic marking

Recommended Uses Suitable for road surfaces, curbs, guide posts, airfields, runways, airportparking, public parking etc.

Not Recommended For Standard architectural applications

UV Resistance Excellent

Thermal Resistance Surface: 10°C to 100°C


Solids 45% +/- 1%

VOC 100-120g per ltr




Dry Time (@18°C) Touch dry: 10 minsHard dry: 30 minsDrying times may vary with atmospheric conditions




Colour White, yellow and green

Industrial Road Marking Paint S P S 1 3 6 1



APPLICATION


Surface Preparation Ensure surface is dry before application


Spray Use applicable road marking machinery



Tip Size: 0.013 - 0.017�

Output PSI: 1800 - 2300


Brush/Roller When brushing apply with full strokes, using a natural bristle brushUse a short-nap mohair roller for roller application


Prod

uct D

ata

Shee

t

S P S 1 3 6 1

Non-solvent marine aluminium cleaner concentrate

Prod

uct D

ata

Shee

t

DESCRIPTION

Premium quality aluminium cleaner

COLOUR

Light Blue/Yellowish

ADVANTAGES

Easy to useNon-scratchingLeaves substrate very smoothNo chemical reactionNo solvent so can be rinsed safelyEnvironment/worker friendlyNot a dangerous goodNo toxic fumes

APPLICATION


PRECAUTIONS

Wear neoprene gloves, rinse well after use

TECHNICAL DATA

Pack Size 10 ltrs

No. of components 1

Shelf Life 1 year


Toxicity Nil

Fire Hazard None


Marine Aluminium Cleaner S P S 1 3 4 2




Non-solvent fibre glass cleaner concentrate

Prod

uct D

ata

Shee

t

DESCRIPTION

Premium quality fibreglass cleaner

COLOUR

Light Blue

ADVANTAGES

Easy to useNon-scratchingLeaves substrate very smoothNo chemical reactionNo solvent so can be rinsed on the marina safelyEnvironment/worker friendlyNot a dangerous goodNo toxic fumes

APPLICATION


PRECAUTIONS


TECHNICAL DATA

Pack Size 10 ltrs

No. of components 1

Shelf Life 1 year


Toxicity Nil

Fire Hazard None


Marine Fibre Glass Cleaner S P S 1 3 4 3




A durable, non-solvent, water-based, marine clear topcoat with a VOC level well below the 2005 Montreal Protocol Guidelines

Prod

uct D

ata

Shee

t

SELECTION DATA

Type A premium aluminium finish coat with high resistance properties

Recommended Uses As a topcoat on aluminium, where durability and resistance to marineenvironment, solvents and petro chemicals is requiredNormally used over anticorrosive coatings


Chemical ResistanceExcellent resistance to splash and spillage of: Fuels

Salt

Water

Thermal Resistance Continuous Surface: 100°CNon-Continuous: 150°CFire hazard: Nil

Compatible Coatings Will perform over acrylic, urethane, epoxy, powder coating and otherswhen lightly sanded

Solids 35% +/- 1%





Dry Time (@18°C) Touch dry: 20 minsRecoat: 1 hourHard dry: 12 hoursDrying times may vary with atmospheric conditions



Pack Size 10 ltrs

Colour Clear

Marine Aluminium Clear Coat S P S 1 3 9 1



APPLICATION




Easy to apply


Quick drying


Surface Preparation Ensure primed surface is clean and dry, if necessary degrease with Marine Cleaner(SPS 1345), rinse down with water and wait until dry before applying


Spray:Conventional/HVCP Use a 3/8" minimum I.D material hose, 0.043" I.D. fluid tip and appropriate air cap

It should be held approximately 30 to 35 cms at right anglesfrom the surface




Tip Size: 0.013 - 0.015�

Output PSI: 2100 - 2300


Brush/Roller Brushing is only recommended to touch up small areasApply with full strokes, using a natural bristle brushUse a short nap mohair roller for roller application


Prod

uct D

ata

Shee

t

S P S 1 3 9 1

Robust, non-solvent, water-based, marine wood lacquer with a VOC level well below the 2005 Montreal Protocol Guidelines

Prod

uct D

ata

Shee

t

SELECTION DATA

Type A premium quality marine lacquer in clear or tinted option

Recommended Uses For application on wood in the marine environment


Approvals Independently tested in a weather-o-meter


UV Resistance Excellent

Thermal Resistance Spread of Flame Index (SFI) 8Smoke Developed Index (SDI) 4

Compatible Coatings Can cover acrylics, enamels and alkyds as a protective coating

Solids 40% +/- 1%





Dry Time (@18°C) 1hour, 20 minsRecoat: 1 hourFull Cure: 12 hoursDrying times may vary with atmospheric conditions



Pack Size 10 ltrs

Colour Either clear or SPS coatings transparent tint rangeAvailable in matt, satin, semi-gloss, gloss

Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Marine Wood Lacquer Interior S P S 1 3 9 2 A-B



APPLICATION


Easy to apply, low odour

No sealer required can be applied directly to substrate

Minimal grain lift


Quick drying

Non yellowing with UV protection to substrate


Surface Preparation It is recommended to use as finer paper as is practical to achieve a highgrade finish. No sanding between coats is required, but if there is dust particles etc in the film, sand with a 220 grit paper, or use a green 3M padon a buffing machine


Spray:Conventional/HVCP Use approx 0.9 to 1.2mm fluid tip and appropriate aircap for clear lacquer

Coloured lacquers use approx 1.0 to 1.4mm fluid tip and appropriate air capIt should be held approximately 30 to 35 cms at right angles from the surface


Output PSI: 1800 - 2300

Filter Size: 100 mesh

Brush/Roller Brushing is only recommended to touch up small areasApply with full strokes, using a natural bristle brushUse a 8mm-nap mohair roller for roller application and use flood coating technique


Prod

uct D

ata

Shee

t

Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1S P S 1 3 9 2 A-B

High protection, non-solvent, water-based, marine coating with a VOC level well below the 2005 Montreal Protocol Guidelines

Prod

uct D

ata

Shee

t

SELECTION DATA

Type A modified water-based anti-corrosive acrylic marine grade primer

Recommended Uses For use on steel, aluminium, zinc, and iron structures above the water lineThis includes oilrigs, vessels, bridges, cranes and others

Not Recommended For Permanent immersion

Approvals Meets or exceeds national and international performance standardsIndependently tested by Pacific Aero Space Corporation for corrosion resistance

Chemical ResistanceExcellent to continuous splash and spillage of: Acids

Alkalies

Solvents

Fuels

Salt

Water


Compatible Coatings Will perform over acrylic, urethane, epoxy, powder coating and others when sanded. Normally covered with an SPS Marine Topcoat

Solids 61% +/- 1%








Pack Size 10L standard, larger by request


Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Marine Anti-Corrosive Primer S P S 1 3 9 6



APPLICATION




Excellent adhesion, simply remove all loose and flaking material(SA2.5 blast not required)

Easy to apply


Quick drying




Degrease with Marine Metal Cleaner (SPS 1345) if necessary

New Metal Degrease with Marine Metal Cleaner (SPS 1345), rinse with clean waterthen thoroughly dry before painting the surface






Tip Size: 0.013 - 0.017”

Output PSI: 1800 - 2300




Prod

uct D

ata

Shee

t


Prod

uct D

ata

Shee

t

SELECTION DATA

Type A modified water-based anti-corrosive acrylic marine grade intermediate coat

Recommended Uses For use over Marine Primer on steel, aluminium, zinc, and iron structuresabove the water line. This includes oilrigs, vessels, bridges, cranes and others




Alkalies

Solvents

Fuels

Salt

Water



Solids 61% +/- 1%










Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Marine Anti-Corrosive Intermediate Coat S P S 1 3 9 7

High protection, non-solvent, water-based, marine coatingwith a VOC level well below the 2005 Montreal Protocol Guidelines



APPLICATION




Easy to apply


Quick drying









Tip Size: 0.013 - 0.017�

Output PSI: 1800 - 2300




Prod

uct D

ata

Shee

t


High protection, non-solvent, water-based, marine coatingwith a VOC level well below the 2005 Montreal Protocol Guidelines

Prod

uct D

ata

Shee

t

SELECTION DATA

Type A modified water-based anti-corrosive acrylic marine grade top coat

Recommended Uses For use over Marine Primer on steel, aluminium, zinc, and iron structuresabove the water line. This includes oilrigs, vessels, bridges, cranes and others




Alkalies

Solvents

Fuels

Salt

Water



Solids 61% +/- 1%










Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Marine Anti-Corrosive Top Coat S P S 1 3 9 8



APPLICATION




Easy to apply


Quick drying









Tip Size: 0.013 - 0.017�

Output PSI: 1800 - 2300




Prod

uct D

ata

Shee

t


A durable, non-solvent, water-based, marine clear topcoat with a VOC level well below the 2005 Montreal Protocol Guidelines

Prod

uct D

ata

Shee

t

SELECTION DATA

Type A premium marine finish coat with high resistance properties

Recommended Uses As a topcoat on metal (excluding Aluminium) and Fibreglass, where durabilityand resistance to marine environment, solvents and petro chemicals is requiredNormally used over anticorrosive coatings for a hard, resistant, gloss finish



Alkalies

Solvents

Fuels

Salt

Water

Thermal Resistance Continuous Surface: 100°CNon-Continuous: 150°CFire hazard: Nil

Compatible Coatings Will perform over acrylic, urethane, epoxy, powder coating and otherswhen lightly sanded

Solids 35% +/- 1%





Dry Time (@18°C) Touch dry: 20 minsRecoat: 1 hourHard dry: 12 hoursDrying times may vary with atmospheric conditions



Pack Size 10 ltrs

Colour Clear

Marine Metal Clear Coat S P S 1 3 9 9



APPLICATION


Easy to apply

Self priming

Excellent opacity


Quick drying







Tip Size: 0.013 - 0.015�

Output PSI: 2100 - 2300


Brush/Roller Brushing is only recommended to touch up small areasApply with full strokes, using a natural bristle brushUse a short nap mohair roller for roller application


Prod

uct D

ata

Shee

t

S P S 1 3 9 9

Robust, non solvent, water based, interior wood lacquer with a voc level well below the 2005 Montreal Protocol Guidelines

Prod

uct D

ata

Shee

t

SELECTION DATA

Type A premium quality wood lacquer in matt, gloss and tinted options

Recommended Uses For internal application on wood, wood chipboard, hard board,MDF, plywood etc.






Solids 40% +/- 1%





Dry Time (@18°C) 15 minsRecoat: 30 minsDrying time may vary according to atmospheric conditions



Pack Size 10 ltrs

Colour Clear, tinted, matt, semi gloss, gloss

Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Specialised Wood Lacquer Interior S P S 1 3 2 1A -F

40 microns per coat



APPLICATION


Easy to apply

No sealer required, can be applied directly to substrate

Minimal grain lift


Excellent edge build up

Quick drying

Non yellowing

Safety This product contains no solvents and is non-toxic, however it is recommended that a dust mask be used to protect from atomised material when spraying

Surface Preparation Ensure the substrate is clean and free of loose material. On new wood, it isrecommended to sand with 220 grit paper to achieve a high grade finish





Output PSI: 1800 - 2300


Brush/Roller Brushing is only recommended to touch up small areasApply with small strokes, using a natural bristle brushUse a short-nap mohair roller for roller application


Prod

uct D

ata

Shee

t

Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1S P S 1 3 2 1A -F

Robust, non solvent, water based, exterior wood lacquer with a voc level well below the 2005 Montreal Protocol Guidelines

Prod

uct D

ata

Shee

t

SELECTION DATA

Type A premium quality exterior wood lacquer in matt, gloss and tinted options


Not Recommended For Interior use


Chemical Resistance Good resistance to household chemicals, non-alcoholic beverages, red wine,white wine, beer, powder coffee, black tea, blackcurrant, juice, condensed milk,butter, olive oil, mustard, common salt, onions, acetic acid, and citric acid



Solids 40% +/- 1%








Pack Size 10 ltrs

Colour Clear, tinted, matt, semi gloss, gloss

Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Specialised Wood Lacquer Exterior S P S 1 3 2 1G -L

40 microns per coat



APPLICATION


Easy to apply


Minimal grain lift



Quick drying

Non yellowing







Output PSI: 1800 - 2300




Prod

uct D

ata

Shee

t

Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1S P S 1 3 2 1G -L

Robust, non solvent, water-based high build acrylic clear coat with a voc level well below the 2005 Montreal Protocol Guidelines

Prod

uct D

ata

Shee

t

SELECTION DATA

Type A premium quality High Build Acrylic Clear Coat in matt, gloss and tintedoptions for photo frames, table tops etc.





Thermal Resistance Spread of Flame Index (SFI) 8Smoke Developed index (SDI) 4Continuous surface: 100°CNon-continuous: 150°C


Solids 40% +/- 1%








Pack Size 10 ltrs

Colour Either clear or standard architectural colour range. Available in matt, satin, semi gloss, gloss

Specialised High Build Acrylic Clear Coat S P S 1 3 2 4



APPLICATION


Easy to apply


Minimal grain lift



Quick drying

Non yellowing







Output PSI: 1800 - 2300




Prod

uct D

ata

Shee

t

S P S 1 3 2 4

A durable, germ resistant medical coat with a voc level well below the 2005 Montreal Protocol Guidelines

Prod

uct D

ata

Shee

t

SELECTION DATA

Type A premium quality, non-solvent, antistatic, germ resistant water-based lacquer

Recommended Uses For internal use in medical facilities ie hospitals, clinics, dental surgeries

Not Recommended For

Germ Resistance Employs closed pore technology

Chemical Resistance Resistant to adhesion by inks and other paints

Resistance to mould and mildew

Thermal Resistance Spread of Flame Index (SFI) 8Smoke Developed Index (SDI) 4Continuous surface: 100°CNon-continuous: 150°C

Compatible Coatings Will perform over most existing architectural coatings

Solids 40% +/- 1%





Dry Time (@18°C) 15 minsRecoat: 30 minsDrying times may vary with atmospheric conditions



Pack Size 10 ltrs

Colour Clear

Specialised Medicoat S P S 1 3 2 5

40 microns per coat



APPLICATION


Easy to apply


Minimal grain lift



Quick drying

Non yellowing


Surface Preparation Ensure the substrate is clean and free of loose material. It is recommended to sandexisting coating with 220 grit paper to achieve a high level of adhesion





Output PSI: 1800 - 2300




Prod

uct D

ata

Shee

t

S P S 1 3 2 5

A high performance, graffiti resistant clear coat with a voc level well below the 2005 Montreal Protocol Guidelines

Prod

uct D

ata

Shee

t

SELECTION DATA

Type A premium quality water-based anti-graffiti clear coat which is quick dryingand chemical resistant

Recommended Uses For internal and external use as anti-graffiti protective finishing coat overexisting coatings. Ideal for schools and other public facilities susceptible tograffiti attacks

Not Recommended For

Approvals Independently tested in a weather-o-meter

Chemical Resistance Resistant to adhesion by inks and other paints

Thermal Resistance Spread of Flame Index (SFI) 8Smoke Developed Index (SDI) 4Continuous surface: 100°CNon-continuous: 150°C

Compatible Coatings Will perform over most existing coatings

Solids 40% +/- 1%





Dry Time (@18°C) 15 minsRecoat: 30 minsDrying times may vary with atmospheric conditions



Pack Size 10 ltrs

Colour Clear

Specialised Anti-Graffiti Clear Coat S P S 1 3 2 6

40 microns per coat



APPLICATION


Easy to apply

Can be applied directly to substrate



Quick drying

Non yellowing


Surface Preparation To be applied over SPS architectural products





Output PSI: 1800 - 2300




Prod

uct D

ata

Shee

t

S P S 1 3 2 6

Non-solvent ink remover

Prod

uct D

ata

Shee

t

DESCRIPTION

Water based Graffiti ink remover

COLOUR

Colourless to faint yellowish liquid

ADVANTAGES

Easy to useLeaves substrate very smoothNo chemical reactionNo mineral solventsEnvironment/worker friendlyNo toxic fumesRemoves graffiti from all surfaces (use in conjunction with SPS anti-graffiti lacquer)

APPLICATION

Apply with soft brush (can be sprayed) onto the graffiti and clean with a rag. Rinse well with water to clean

SAFETY


TRANSPORTATION

Not classified as a dangerous good, safe to transport by land, sea or air using standard best practice precautions

TECHNICAL DATA

Pack Size 5, 10 ltrs

No. of components 1

Shelf Life 1 year


Toxicity Nil

Fire Hazard None


Specialised Graffiti Ink Remover S P S 1 3 4 8




Non-solvent concentrate

Prod

uct D

ata

Shee

t

DESCRIPTION

Premium quality pre-prep concentrate to kill moss, mould, lichen on various surfaces

COLOUR

Yellowish

ADVANTAGES

Kills spores to help stop future growth of moss, mould, lichen etc.Much easier to water blast and can be used at low pressure to minimise damage to the surfaceLeaves substrate very smoothEasy to useNo chemical reactionNo mineral solventsEnvironment/worker friendlyNo toxic fumes

APPLICATION

Dilute 1:10 and spray on roof. Leave it for 3 to 4 days to kill moss, mould, lichen etc. and then water blast

SAFETY


TRANSPORTATION


TECHNICAL DATA


No. of components 1

Shelf Life 1 year


Toxicity Nil

Fire Hazard None


Specialised TTC Tile Mould/Moss Treatment S P S 1 3 4 9




Non-solvent concentrate

Prod

uct D

ata

Shee

t

DESCRIPTION

Premium quality concrete tile treatment concentrate to kill moss, mould, and lichen on roofs

COLOUR

Colourless to faint yellowish liquid

ADVANTAGES

Kills spores to help stop future growth of moss, mould, lichen etcMuch easier to waterblast and can be used at low pressure to minimise damage to the surfaceEasy to useNo chemical reactionNo mineral solventsEnvironment/worker friendlyNo toxic fumes

APPLICATION

Dilute 1:10 and spray on roof. Leave it for 3 to 4 days to kill moss, mould, lichen etc. and then waterblast the roof

SAFETY


TRANSPORTATION


TECHNICAL DATA


No. of components 1

Shelf Life 1 year


Toxicity Nil

Fire Hazard None


Specialised Concrete Tile Mould/Moss Treatment S P S 1 3 5 0




Prod

uct D

ata

Shee

t


SPS Coatings Ltd www.spscoatings.com.

New Zealand Sales Office: Phone +64 9 920 6015 or +64 9 920 6016 Fax +64 9 273 1240 Email [email protected]

Specialised - Water Repellent Membrane S P S 1 3 5 2Non-solvent concentrate

SELECTION DATA


Recommended Uses Ideal for use on Terraces, Balconies , Bathrooms , Cellars , interior and exterior walls.


Resistant to UV, moss, mould, lichen, growth, mildew and water.


Solids 20%

VOC 100 - 120g per ltr.

Specific Gravity 1.00







Colour Clear

A specialist powder to improve water-proofing and expansion cracking resistance

Prod

uct D

ata

Shee

t

SELECTION DATA

Type A pale yellow powder additive to cement and plaster

Recommended Uses For use in dry mortar powder for construction adhesives and for cementbased waterproof systems for balconies, terraces, and cellars. Also inceramic tile adhesives and watertight tile adhesives

Not Recommended For Use as a plaster substitute

Thermal Expansion Properties Prevents plaster from cracking when temperatures fluctuate between -10°Cand 40°C



Solids 98% +/- 1%

PH Value (30% wt in water) 7.0 - 8.0

Shelf Life Plast'o'fix can be stored for up to 6 months in a cool, dry placeContainers that have been opened must be used up as quickly as possibleas the product becomes lumpy when exposed to atmospheric humidityCare must be taken not to expose it to elevated temperatures or pressure,as this can cause caking


Pack Size 10, 20kg

Specialised Plast �O� Fix S P S 1 3 7 1



APPLICATION

Safety If properly handled and used for the intended purpose it has no harmfuleffect on health according to our experience and the information available to usProlonged exposure to the product can cause irritation of the skin andmucous membranes

Conditions Care should be taken to avoid excessive heat development when the drycomponents are mixed

Mixing:Plaster Mix Plast 'O' Fix at a ratio of 3% of the dry plaster weight

Mortar mix (for swimming pools) Mix Plast 'O' Fix at a ratio of:8% of the dry Mortar mix weight

Mortar mix (for general use) Mix Plast 'O' Fix at a ratio of:3% of the dry Mortar mix weight


Prod

uct D

ata

Shee

t

S P S 1 3 7 1

Architectural

Industrial

Marine

Specialised

MSDS Sheets

Mat

eria

l Saf

ety

Data

She

et

Product Name

Manufacturer Product Code SPS 1306A

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use Can be used on iron, aluminium, galvanised iron roofs

PHYSICAL DESCRIPTION/PROPERTIES

Appearance Coloured, flowable liquid Boiling point/Melting point 100°C/0°C Vapour Pressure n/a Specific Gravity 1.250 +/- 0.005 Flash Point (0°C) n/a Flammability Limits n/aSolubility In Water Fully miscible

OTHER PROPERTIES

Percentage Volatile 50% +/- 2%Reactivity Stable

INGREDIENTS

Chemical Entity CAS No Proportion

Water 7732 - 18 - 5 10 - 20%

Acrylic Polymer n/av 50 - 60%

Extenders n/av 10 - 30%

Coalescent Agents 57 - 55 - 6 < 10%

Ammonia 7664 - 41 - 7 <10%

Paint Additives (dispersants, defoamers etc) n/av < 10%

Pigments (colour dependent) 5 - 20%

Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1MATERIAL SAFETY DATA SHEET S P S 1 3 0 6 A

Architectural Metal Primer



HEALTH EFFECTS

Acute: Swallowed - No toxic effect anticipatedEye - May cause minor irritation to eyesSkin - Prolonged skin contacts may cause irritationInhaled - No toxic effect anticipatedChronic:No long-term effect anticipated

FIRST AID

Swallowed - If swallowed give 2 glasses of water and seek immediate medical advice. Do not induce vomitingEye Contact - Flush out eyes with large amount of water while holding the eyelids apart and seek immediate medical adviceSkin Contact - Wash affected areas with soap and waterInhaled - Move the patient into fresh air, lay down and rest and immediately seek medical advice

ADVICE TO DOCTOR

Treat symptomatically or contact the National Poisons Information Centre

ENGINEERING CONTROLS

If good natural ventilation is not taking place, use a localised exhaust ventilator with a minimum capture of 0.5m/sec (100ft/min)at the point of vapour evolution

PRECAUTIONS FOR USE Exposure StandardsWater n/aAcrylic Polymer n/avExtenders 10 mg/mCoalescent Agents 10 mg/mAmmonia 25 PPMPaint Additives n/avPigments n/av

PERSONAL PROTECTION

Respiratory - None required if airborne concentration is maintained below, the TWA/TLV�s listed belowSkin - It is recommended to wear gloves, which provide good protection against permeation, e.g. neopreneEyes - Use chemical splash resistant goggles/safety glasses to protect the eyesFlammability - This material is non-flammable

SAFE HANDLING INFORMATION

Storage - Store in a cool place and out of direct sunlight. Keep containers sealed when not in useTransport - Not defined as Dangerous Goods by NZS 5433. No special requirement neededSpill and disposal - Ensure area is well ventilated and then contain spillage with absorbent material such as sand or vermiculiteCollect spillage and absorbent material for disposal in accordance with local authority regulations for non-hazardous liquid waste

FIRE/EXPLOSION HAZARD

Product is non-flammable

EXTINGUISHING MEDIA

As the product is non-flammable use appropriate media for the surrounding fire hazard

STANDARDS

This product has been developed in accordance to accepted national and international standards

Mat

eria

l Saf

ety

Data

She

et

ABBREVIATIONS n/a - not applicable n/av - not available TWA - Time weighted average TLV - Threshold limit value

The information contained in this safety data sheet is given in good faith. It is accurate to the best of our knowledge and experienceThe information given in this data sheet does not constitute or replace the user�s own assessment of workplace risk as required by health and safety legislation


Mat

eria

l Saf

ety

Data

She

et

Product Name Architectural Concrete TileRoof Primer

Manufacturer Product Code SPS 1306B

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use Primer for rusted surfaces, on steel, aluminium and galvanized iron

Can be used on concrete roof tiles


Appearance Clear, coloured, flowable liquid Boiling point/Melting point 100°C/0°C Vapour Pressure n/a Specific Gravity 1.10 +/- 0.05 Flash Point (0°C) n/a Flammability Limits n/aSolubility In Water Fully miscible

OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 40 - 60%




Ammonia 7664 - 41 - 7 <10%



Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1MATERIAL SAFETY DATA SHEET S P S 1 3 0 6 B



HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR





PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Architectural Acrylic UndercoatManufacturer Product Code SPS 1311A

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use Ideal for use on indoor/outdoor wall systems


Appearance Coloured, flowable liquidBoiling point/Melting point 100°C/0°C Vapour Pressure n/a Specific Gravity Flash Point (0°C) n/a Flammability Limits n/aSolubility In Water Fully miscible

OTHER PROPERTIES

Percentage Volatile Reactivity Stable

INGREDIENTS


Water 7732 - 18 - 5 10 - 20%




Ammonia 7664 - 41 - 7 < 10%




35% +/- 1%

1.56 +/- 0.01



HEALTH EFFECTS


FIRST AID

Swallowed - If swallowed give 2 glasses of water and seek immediate medical advice. Do not induce vomitingEye Contact - Flush out eyes with large amount of water while holding the eyelids apart Skin Contact - Wash affected areas with soap and waterInhaled - Move the patient into fresh air

ADVICE TO DOCTOR





PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name

Acrylic SealerManufacturer Product Code SPS 1311B

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use MDF boards etc.


Appearance White, ColouredBoiling point/Melting point 100°C/0°C Vapour Pressure n/a Specific Gravity Flash Point (0°C) n/a Flammability Limits n/aSolubility In Water Fully miscible

OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%




Ammonia 7664 - 41 - 7 < 10%

Paint Additives (dispersants, defoamers etc) n/av < 10



Architectural Multipurpose

1.50 +/- 0.01

40% +/- 1%



HEALTH EFFECTS


FIRST AID

Swallowed - If swallowed give 2 glasses of water and seek immediate medical advice. Do not induce vomitingEye Contact - Flush out eyes with large amount of water while holding the eyelids apartSkin Contact - Wash affected areas with soap and waterInhaled - Move the patient into fresh air, lay down and rest

ADVICE TO DOCTOR




PRECAUTIONS FOR USE Exposure StandardsWater n/aAcrylic Polymer n/avExtenders n/avCoalescent Agents 10 mg/mAmmonia 25 PPMPaint Additives n/avPigments n/av

PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Architectural Acrylic CoatingManufacturer Product Code SPS 1312, 1313, 1314, 1315

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use For use on walls


Appearance White, Coloured, flowable liquidBoiling point/Melting point 100°C/0°C Vapour Pressure n/a Specific Gravity Flash Point (0°C) n/a Flammability Limits n/aSolubility In Water Fully miscible

OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%




Ammonia 7664 - 41 - 7 < 10%



Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1MATERIAL SAFETY DATA SHEET S P S 1 3 1 2 -1 5

1.35, 1.28, 1.20, 1.30, +/- 0.01

45, 48, 48, 30, +/- 1%



HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR





PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et



Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1S P S 1 3 1 2 -1 5

Mat

eria

l Saf

ety

Data

She

et

Product Name

Manufacturer Product Code SPS 1316 A(Low Sheen), B(Semi Gloss)

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use Replacement for enamels. For use on walls, window/door frames, finishing

timbers etc.


Appearance White, ColouredBoiling point/Melting point 100°C/0°C Vapour Pressure n/a Specific Gravity 1.250 +/- 0.005 Flash Point (0°C) n/a Flammability Limits n/aSolubility In Water Fully miscible

OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%




Ammonia 7664 - 41 - 7 <10%



Material Safety Data SheetM S D SMaterial Safety Data SheetM S D SMATERIAL SAFETY DATA SHEET

Architectural Acrylic Trimkote

S P S 1 3 1 6



HEALTH EFFECTS


FIRST AID

Swallowed - If swallowed give 2 glasses of water and seek immediate medical advice. Do not induce vomitingEye Contact - Flush out eyes with large amount of water while holding the eyelids apartSkin Contact - Wash affected areas with soap and waterInhaled - Move the patient into fresh air

ADVICE TO DOCTOR





PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et



Material Safety Data SheetM S D SMaterial Safety Data SheetM S D S S P S 1 3 1 6

Mat

eria

l Saf

ety

Data

She

et

Product Name Architectural Acrylic GlazeManufacturer Product Code SPS 1317

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use Can be used on roofs etc.


Appearance Coloured, flowable liquidBoiling point/Melting point 100°C/0°C Vapour Pressure n/a Specific Gravity 1.00 +/- 0.05 Flash Point (0°C) n/a Flammability Limits n/aSolubility In Water Fully miscible

OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 60 - 80%



Ammonia 7664 - 41 - 7 < 10%



Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1MATERIAL SAFETY DATA SHEET S P S 1 3 1 7



HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR




PRECAUTIONS FOR USE Exposure StandardsWater n/aAcrylic Polymer n/avCoalescent Agents 10 mg/mAmmonia 25 PPMPaint Additives n/avPigments n/av

PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Architectural Roof Top CoatManufacturer Product Code SPS 1318

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use For use on roof etc.



OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%




Ammonia 7664 - 41 - 7 < 10%






HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR





PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Architectural InsulatingRoof Top Coat

Manufacturer Product Code SPS 1319

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use For use on roofs etc.



OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%




Ammonia 7664 - 41 - 7 < 10%






HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR





PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Architectural Concrete PaintManufacturer Product Code SPS 1320

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use For use on concrete flooring


Appearance White, Coloured Boiling point/Melting point 100°C/0°C Vapour Pressure n/a Specific Gravity 1.15 +/- 0.05 Flash Point (0°C) n/a Flammability Limits n/aSolubility In Water Fully miscible

OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%



Ammonia 7664 - 41 - 7 < 10%






HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR




PRECAUTIONS FOR USE Exposure StandardsWater n/aAcrylic Polymer n/avCoalescent Agents 10 mg/mAmmonia 25PPMPaint Additives n/avPigments n/av

PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Architectural Floor Lacquer InteriorManufacturer Product Code SPS 1322A, 1322B

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use For use on wooden floor


Appearance Clear, Coloured, flowable liquid Boiling point/Melting point 100°C/0°C Vapour Pressure n/a Specific Gravity 1.05 +/- 0.05 Flash Point (0°C) n/a Flammability Limits n/aSolubility In Water Fully miscible

OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%




Pigments (dependent) (colour dependent) 15 - 25%

Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1MATERIAL SAFETY DATA SHEET S P S 1 3 2 2 A-B



HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR




PRECAUTIONS FOR USE Exposure StandardsWater n/aAcrylic Polymer n/avCoalescent Agents 10 mg/mPaint Additives n/avPigments n/av

PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Architectural Sand Stone SealerManufacturer Product Code SPS 1327A

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use For use on sandstone and cobble stone


Appearance Clear, Coloured, flowable liquid Boiling point/Melting point 100°C/0°C Vapour Pressure n/a Specific Gravity 1.05 +/- 0.05 Flash Point (0°C) n/a Flammability Limits n/aSolubility In Water Fully miscible

OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%

Polymer n/av 70 - 80%

Coalescent Agents 57 - 55 - 6 > 10%

Paint Additives (dispersants, defoamers etc) n/av > 10%





HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR




PRECAUTIONS FOR USE Exposure StandardsWater n/aPolymer n/avCoalescent Agents 10 mg/mPaint Additives n/avPigments n/av

PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Architectural Concrete SealerManufacturer Product Code SPS 1327B

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use For use on concrete floors


Appearance Clear, coloured, flowable liquid Boiling point/Melting point 100°C/0°C Vapour Pressure n/a Specific Gravity 1.05 +/- 0.05 Flash Point (0°C) n/a Flammability Limits n/aSolubility In Water Fully miscible

OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%








HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR




PRECAUTIONS FOR USE Exposure StandardsWater n/aPolymer n/avCoalescent Agents 10 mg/mPaint Additives n/avPigments n/av

PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name

Manufacturer Product Code SPS 1351A, 1351B

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use For use on fences, wood, plasters, roof etc.



OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 40 - 60%


Extenders n/av < 10%


Ammonia 7664 - 41 - 7 <10%




Architectural Acrylic Fencekote



HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR





PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Prod

uct D

ata

Shee

t

SELECTION DATA

Type Non-solvent, water-based acrylic stains

Recommended Uses Ideal for use on Terraces, Balconies, Bathrooms, Cellars, interior and exterior walls.

Not Recommended For Use as a standard architectural acrylic coating

Resistant to UV, moss, mould, lichen, growth , add water after mildew


Solids 20%


Specific Gravity 1.0



Dry Time (@18°C) Touch dry: 20 mins Recoat: 1 hourDrying times may vary with atmospheric conditions




Colour Clear

Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1



Specialised – Water Repellent Membrane SPS 1352


APPLICATION


Easy to apply

Self priming

Excellent opacity

Quick drying







Tip Size: 0.013 - 0.021�

Output PSI: 2100 - 2300




Prod

uct D

ata

Shee

t

Material Safety Data SheetM S D SMaterial Safety Data SheetM S D SMaterial Safety Data SheetM S D SMaterial Safety Data SheetM S D S S P S 1 3 5 2

Mat

eria

l Saf

ety

Data

She

et

Product Name Industrial Anti-Corrosive PrimerManufacturer Product Code SPS 1301

IDENTIFICATION


Can be used on tanks, roofs, steel frames, window/door frames



OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%




Ammonia 7664 - 41 - 7 < 10%






HEALTH EFFECTS


FIRST AID

Swallowed - If swallowed give 2 glasses of water and seek immediate medical advice. Do not induce vomitingEye Contact - Flush out eyes with large amount of water while holding the eyelids apart and seek immediate medical adviceSkin Contact - Wash affected areas with soap and waterInhaled - Move the patient into fresh air, lay down and immediately seek medical advice

ADVICE TO DOCTOR





PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Industrial Anti-CorrosiveIntermediate Coat


IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use For use on anti-corrosive primer



OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%




Ammonia 7664 - 41 - 7 < 10%






HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR





PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Industrial Anti-Corrosive Top CoatManufacturer Product Code SPS 1303

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use For use on anti-corrosive primer, intermediate coat



OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%




Ammonia 7664 - 41 - 7 < 10%






HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR





PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Industrial Anti-CorrosivePrimer Plus


IDENTIFICATION


Can be used on tanks, roofs, steel frames, window/door framesSuitable for very harsh environments



OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%




Ammonia 7664 - 41 - 7 < 10%






HEALTH EFFECTS


FIRST AID

Swallowed - If swallowed give 2 glasses of water and seek immediate medical advice. Do not induce vomitingEye Contact - Flush out eyes with large amount of water while holding the eyelids apart and seek immediate medical adviceSkin Contact - Wash affected areas with soap and waterInhaled - Move the patient into fresh air, lay down and immediately seek medical advice

ADVICE TO DOCTOR





PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Industrial Anti-CorrosiveIntermediate Coat Plus


IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use Used on anti-corrosive primer plus



OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%




Ammonia 7664 - 41 - 7 < 10%






HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR





PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Industrial Anti-CorrosiveTop Coat Plus


IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use To be used on anti-corrosive intermediate coat plus



OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%




Ammonia 7664 - 41 - 7 < 10%






HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR





PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Industrial Metal Top CoatManufacturer Product Code SPS 1305

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use For use on metal as a topcoat



OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%




Ammonia 7664 - 41 - 7 < 10%






HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR





PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Industrial MetalClear Coat Standard


IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use For use on metal


Appearance Clear, flowable liquidBoiling point/Melting point 100°C/0°C Vapour Pressure n/a Specific Gravity 1.05 +/- 0.05 Flash Point (0°C) n/a Flammability Limits n/aSolubility In Water Fully miscible

OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%







HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR




PRECAUTIONS FOR USE Exposure StandardsWater n/aAcrylic Polymer n/avCoalescent Agents 10 mg/mPaint Additives n/av

PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Industrial MetalClear Coat Premium

Manufacturer Product Code SPS 1329B

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use For use on metal



OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%







HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR




PRECAUTIONS FOR USE Exposure StandardsWater n/aAcrylic Polymer n/avCoalescent Agents 10 mg/mPaint Additives n/av

PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Industrial Metal CleanerManufacturer Product Code SPS 1345

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use For use on mild steel, stainless steel


Appearance Yellowish/Bluish liquidBoiling point/Melting point 100°C/0°C Vapour Pressure n/a Specific Gravity 1.0 +/- 0.05 Flash Point (0°C) n/a Flammability Limits n/aSolubility In Water Fully miscible

OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 60 - 70%

Additives n/av 30 - 40%




HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR




PRECAUTIONS FOR USE Exposure StandardsWater n/avAdditives n/av

PERSONAL PROTECTION

Respiratory - None required if airborne concentration is maintained below, the TWA/TLV�s listed belowSkin - It is recommended to wear gloves, which provide good protection against permeation, e.g. neopreneEyes - Use chemical splash resistant goggles to protect the eyesFlammability - This material is non-flammable





EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Industrial Concrete CleanerManufacturer Product Code SPS 1346

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use It cleans concrete surfaces and easily removes dirt, grime, mould and oil deposits


Appearance Yellowish/Bluish liquidBoiling point/Melting point 100°C/0°C Vapour Pressure n/a Specific Gravity 1.00 +/- 0.05 Flash Point (0°C) n/a Flammability Limits n/aSolubility In Water Fully miscible

OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 60 - 70%





HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR




PRECAUTIONS FOR USE Exposure StandardsWater n/avAdditives n/av

PERSONAL PROTECTION

Respiratory - None required if airborne concentration is maintained below, the TWA/TLV�s listed belowSkin - It is recommended to wear gloves, which provide good protection against permeation, e.g. neopreneEyes - Use chemical splash resistant goggles to protect the eyesFlammability - This material is non-flammable





EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Industrial Road Marking PaintManufacturer Product Code SPS 1361

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use For use as traffic marking on road surfaces, curbs, guide posts, airfields,

runways, airport parking, public parking etc.



OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 5 - 10%




Ammonia 7664 - 41 - 7 < 10%






HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR




PRECAUTIONS FOR USE Exposure StandardsWater n/aAcrylic Polymer n/avExtenders 10 mg/mCoalescent Agents n/avAmmonia 25 PPMPaint Additives n/avPigments n/av

PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Marine Aluminium CleanerManufacturer Product Code SPS 1342

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use For use on aluminium


Appearance Yellowish/Bluish liquid Boiling point/Melting point 100°C/0°C Vapour Pressure n/a Specific Gravity 1.00 +/- 0.05 Flash Point (0°C) n/a Flammability Limits n/aSolubility In Water Fully miscible

OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 40 - 60%





HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR




PRECAUTIONS FOR USE Exposure StandardsWater n/aAdditives n/a

PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Marine Fibre Glass CleanerManufacturer Product Code SPS 1343

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use For use on Fibreglass


Appearance Yellowish/Bluish liquid Boiling point/Melting point 100°C/0°C Vapour Pressure n/a Specific Gravity 1.00 +/- 0.05 Flash Point (0°C) n/a Flammability Limits n/aSolubility In Water Fully miscible

OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 40 - 60%





HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR




PRECAUTIONS FOR USE Exposure StandardsWater n/aAdditives n/a

PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Marine Aluminium Clear CoatManufacturer Product Code SPS 1391

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use


Appearance Clear, flowable liquid Boiling point/Melting point 100°C/0°C Vapour Pressure n/a Specific Gravity 1.05 +/- 0.05 Flash Point (0°C) n/a Flammability Limits n/aSolubility In Water Fully miscible

OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%



Ammonia 7664 - 41 - 7 < 10%





HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR





PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Marine Wood Lacquer InteriorManufacturer Product Code SPS 1392 A(matt), B(gloss)

IDENTIFICATION



Appearance Clear, flowable liquid Boiling point/Melting point 100°C/0°C Vapour Pressure n/a Specific Gravity 1.05 +/- 0.05 Flash Point (0°C) n/a Flammability Limits n/aSolubility In Water Fully miscible

OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%








HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR





PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Marine Anti-Corrosive PrimerManufacturer Product Code SPS 1396

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use Primer for new and existing metal surfaces in a marine environment



OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%




Ammonia 7664 - 41 - 7 < 10%






HEALTH EFFECTS


FIRST AID

Swallowed - If swallowed give 2 glasses of water and seek immediate medical advice. Do not induce vomitingEye Contact - Flush out eyes with large amount of water while holding the eyelids apart and seek immediate medical adviceSkin Contact - Wash affected areas with soap and waterInhaled - Move into fresh air, lie down, and immediately seek medical advice

ADVICE TO DOCTOR





PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Marine Anti-CorrosiveIntermediate Coat


IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use Intermediate Top Coat for new and existing metal surfaces in the marine



OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%




Ammonia 7664 - 41 - 7 < 10%






HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR





PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Marine Anti-Corrosive Top CoatManufacturer Product Code SPS 1398

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use Top Coat for use on new and existing metal surfaces in a marine environment



OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%




Ammonia 7664 - 41 - 7 < 10%






HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR





PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Marine Metal Clear CoatManufacturer Product Code SPS 1399

IDENTIFICATION




OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%







HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR




PRECAUTIONS FOR USE Exposure StandardsWater n/aPolymer n/avCoalescent Agents 10 mg/mPaint Additives n/av

PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Specialised Wood Lacquer InteriorManufacturer Product Code SPS 1321A-F

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use Wood, MDF board etc.


Appearance Clear, coloured, flowable liquidBoiling point/Melting point 100°C/0°C Vapour Pressure n/a Specific Gravity 1.05 +/- 0.05 Flash Point (0°C) n/a Flammability Limits n/aSolubility In Water Fully miscible

OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%





Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1MATERIAL SAFETY DATA SHEET S P S 1 3 2 1 A - F



HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR





PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et



Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1S P S 1 3 2 1 A -F

Mat

eria

l Saf

ety

Data

She

et

Product Name Specialised Wood Lacquer ExteriorManufacturer Product Code SPS 1321G-L

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use Wood, MDF board etc.


Appearance Clear, coloured, flowable liquidBoiling point/Melting point 100°C/0°C Vapour Pressure n/a Specific Gravity 1.05 +/- 0.05 Flash Point (0°C) n/a Flammability Limits n/aSolubility In Water Fully miscible

OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%





Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1MATERIAL SAFETY DATA SHEET S P S 1 3 2 1G -L



HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR





PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et



Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1Material Safety Data Sheet S P S 1 3 0 1M S D S S P S 1 3 0 1S P S 1 3 2 1G -L

Mat

eria

l Saf

ety

Data

She

et

Product Name Specialised High BuildAcrylic Clear Coat


IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use MDF boards etc.



OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%



Paint Additives (dispersants, defoamers etc) n/av < 10





HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR





PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Specialised MedicoatManufacturer Product Code SPS 1325

IDENTIFICATION




OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%



Paint Additives (dispersants, defoamers etc) n/av > 10





HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR





PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Specialised Anti-GraffitiClear Coat


IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use As an anti-graffiti coating


Appearance Clear flowable liquidBoiling point/Melting point 100°C/0°C Vapour Pressure n/a Specific Gravity 1.05 +/- 0.05 Flash Point (0°C) n/a Flammability Limits n/aSolubility In Water Fully miscible

OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 10 - 20%








HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR





PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Specialised Graffiti Ink RemoverManufacturer Product Code SPS 1348

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use Graffiti ink remover



OTHER PROPERTIES


INGREDIENTS


Water 7732 - 18 - 5 50 - 60%

Aromatic Alcohol n/av 20 - 30%

Alkanolamine 141 - 43 - 5 < 10%

Additive A 67 - 68 - 5 10 - 15%

Additive B 5 - 10%




HEALTH EFFECTS


FIRST AID

Swallowed - If swallowed give 2 glasses of water and seek immediate medical advice. Do not induce vomitingEye Contact - Flush out eyes with large amount of water while holding the eyelids apart. Seek immediate medical adviceSkin Contact - Wash affected areas with soap and water. If irritation is present or persists, seek immediate medical adviceInhaled - Move the patient into fresh air, lay down and rest and seek immediate medical advice

ADVICE TO DOCTOR




PRECAUTIONS FOR USE Exposure StandardsWater n/aAromatic Alcohol n/avAlkanolamine n/avAdditive A n/avAdditive B n/av

PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Specialised TTC TileMould/Moss Treatment


IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use For treatment of tiles prior to application of coatings, kills moss mould etc


Appearance Pale yellow coloured, flowable liquidBoiling point/Melting point 100°C/0°C Vapour Pressure n/a Specific Gravity 1.00 +/- 0.05 Flash Point (0°C) n/a Flammability Limits n/aSolubility In Water Fully miscible

OTHER PROPERTIES


INGREDIENTS


Additive A n/av 80 - 90%

Additive B n/av 10 - 20%




HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR




PRECAUTIONS FOR USE Exposure StandardsAdditive A n/avAdditive B n/av

PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Specialised PPC Mould/Moss Treatment


IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use For treatment to kill moss mould etc


Appearance Pale yellow coloured, flowable liquidBoiling point/Melting point 100°C/0°C Vapour Pressure n/a Specific Gravity 1.0 +/- 0.05 Flash Point (0°C) n/a Flammability Limits n/aSolubility In Water Fully miscible

OTHER PROPERTIES


INGREDIENTS


Additive A n/av 80 - 90%

Additive B n/av 10 - 20%




HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR




PRECAUTIONS FOR USE Exposure StandardsAdditive A n/avAdditive B n/av

PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Mat

eria

l Saf

ety

Data

She

et

Product Name Specialised Plast �O� FixManufacturer Product Code SPS 1371

IDENTIFICATION

U. N. Code None allocatedDangerous Goods Class None allocated (product is not considered dangerous)Hazchem Code None allocated (product is not considered dangerous)Poison�s Schedule None allocated (product is not scheduled) Packaging Group None allocated (product considered safe to transport)General Use Can be used in dry mortar powder for construction adhesives and cement

based waterproof systems for balconies, terraces, cellars, ceramic tileadhesives and watertight tile adhesives


Appearance Pale yellow powderBoiling point/Melting point 100°C/0°C Vapour Pressure n/a Specific Gravity 1.0 +/- 0.05 Flash Point (0°C) n/a Flammability Limits n/aSolubility In Water Fully miscible

OTHER PROPERTIES


INGREDIENTS


Additive A n/av > 98%




HEALTH EFFECTS


FIRST AID


ADVICE TO DOCTOR




PRECAUTIONS FOR USE Exposure StandardsAdditive A n/av

PERSONAL PROTECTION






EXTINGUISHING MEDIA


STANDARDS


Mat

eria

l Saf

ety

Data

She

et




Documents

ECO FRIENDLY PAINTSspscoatings.co.in › wp-content › uploads › 2017 › 04 › SPS-Coatings-2017pdf.pdfequipped plant based in Auckland, New Zealand. Architectural The range of