Ecoenergy

I d e a s t o i n s t a l l

ECO HOT WATERAir-water heat pump for domestic hot water with integrated solar panels and remote control via App GB 02

The Eco Hot Water heat pump

The EMMETI heating pumps have a square form

factor for better installation in all spaces.

To install the device you only need to link the intake and

exit water tubes, the condensation dump and the home

electric system.

The EQ 2014 and EQ 3014 ES water pumps take the heat from the

surrounding air and cede it to the water inside the tank, reducing costs

for heating of water which means a great economic saving, up to 70% in

comparison with traditional electric water heaters.

Moreover, the Eco Hot Water heating pump, coupled with the FEBOS accessory

(not included), can be remotely activated through smartphone/tablet; free app down-

loadable from the Apple Store and Google Play.

The Range

Model EQ 2014 EQ 3014 ES

Tank capacity 200 ℓ 300 ℓ

Average heating capacity 1,8 kW 1,8 kW

dB

kWh/annum GJ/annum

A B C D E F G

2015 812/2013

A

L

1020

983

936

--

--

--54

EQ 2014

dB57

dB

kWh/annum GJ/annum

A B C D E F G

2015 812/2013

A

XL

1393

1345

1283

--

--

--54

EQ 3014 ES

dB57

EQ 2014

EQ 3014 ES

Ecoenergy

I d e a s t o i n s t a l l

Energy saving gets Economic saving

On the basis of the European data it is clear that the annual energy consumption for domestic hot water production of an average family

composed by 3 persons is equal to 1.840 kWh/year.

Electric heat pump heaters

EQ 2014EQ 3014 ES

EQ 3014 ES + Thermal solar

EQ 2014 - EQ 3014 ES+ Emmeti Sun

+ ++ ++ ++ +

Electrical energy consumption 1840 kWh/year 620 kWh/year 320 kWh/year 0 kWh/yearAnnual energy cost 408 €/year 136 €/year 70 €/year 0 €/year

NB: Data refer to the following conditions: annual average temperature of the inlet air equal to 20 °C - Electricity cost 0.22 €/kWh

EQ 2014 model

• Capacity 200 liters.

• S235 JR steel boiler with internal inorganic coating.

Both models

• Insulation in rigid polyurethane foam (PU) of high thickness and

without CFC and HCFC, average thickness 50 mm.

• Anticorrosion electronic anode (2 on model EQ 3014 ES).

• External painted sheet metal with epoxy powders (silver gray

color).

• Hydraulic fittings placed on the left side.

• 1.5 kW 230 V~ electric heater integration.

Manually activable through control panel or automatically as

heating pump integration or anti-legionella treatment.

• R134a ecological refrigerant fluid.

• Rotary compressor for the maximum quiet operation.

• Centrifugal fan.

• Condenser wrapped around the steel boiler (not immersed in the

water).

• Touch screen control panel, backlit to allow the different working

parameters settings within 24 hours.

EQ 3014 ES model

• Capacity 300 liters.

• AISI 316-L stainless steel boiler with internal pickling coating.

• Exchanger for solar integration with a surface of 1 m2.

Constructional characteristics

TEMP

Works withiPhone

Rete elettrica

Contatoredi scambio(ENEL)

Contatoredi produzione(GSE)

FEBOS

Fotovoltaico

Inverter

Uscita ariaIngresso aria

Uscita acqua caldasanitaria

Ingresso acqua fredda

A

2

AA

3

EPE pipe Ø internal 160 mmA PVC pipe Ø 160 mm2 Tee ABS with diverter valve - Ø internal 160 mm3

Installation example for EQ 2014 with FEBOS accessory

Electrical network

Main Exchange Meter(ENEL)

GenerationMeter(GSE)

Photovoltaic

Outlet airInlet air

Outlet sanitary hot water

Inlet cold water

Works withiPhone

Installation example for EQ 3014 ES with FEBOS accessory

Electrical network

Main Exchange Meter(ENEL)

FEBOS

Photovoltaic

Inverter

Outlet airInlet air

Outlet sanitary hot water

Inlet cold water

EPE pipe Ø internal 160 mmA PVC pipe Ø 160 mm2 Tee ABS with diverter valve - Ø internal 160 mm3

Thermal solar

Condenser

Solar exchanger

Insulation

Solare termico

A

2

AA

3

GenerationMeter(GSE)

Technical Data

Working range

Model EQ 2014 EQ 3014 ES

Nominal power consumption by compressor W 460 460

Installation with heat source: Indoor air DB 20°C ( Outdoor air DB 7°C ), according the Regulations EU n° 812-814/2013 and Standard EN 16147:2011

Declared load profile L XL

Energy efficiency class A (A*) A+ (A+*)

Thermostat temperature setting °C 55 55

Heating up time h:min 5:15 (6:45*) 7:15 (11:15*)

Heating up energy input kWh 2,55 (3,05*) 3,50 (4,90*)

Total energy consumption during tapping cycle WEL-TC kWh 4,29 (4,68*) 5,79 (6,30*)

COPDHW 2,71 (2,49*) 3,29 (3,03*)

Standby power input W 36 32

Maximum volume of usable hot water (40 °C) ℓ 239 343

Sound power level LWA, indoors dB(A) 59 (54*) 59 (54*)

Sound power level LWA, outdoors -(57*) -(57*)

Refrigerant load R134a / CO2 eq. (GWP = 1430) kg / t 0,95 / 1,36 0,95 / 1,36

Max working pressure refrigerant circuit (HP/LP) Mpa 2,1 / 1,3 2,1 / 1,3

Power supply V~ / Hz 230V~ 50Hz 230V~ 50Hz

Maximum power consumption W 2050 2050

Maximum current consumption A 8,92 8,92

N. of electrical heaters x power consumption W 1 x 1500 1 x 1500

Air flow m3/h 400 400

Static pressure Pa 40 40

Storage capacity ℓ 200 300

Water fittings Ø G 3/4" F G 3/4" F

Max working pressure bar 7 7

Dimensions (WxDxH) mm 590x565x1750 664x642x1820

Grade of protection IPX1B IPX1B

Dimensions of air connections (Ø / max length) mm/m 160 / 10 160 / 10

Weight (net / with water) kg 115 / 315 122 / 422

* Outdoor air DB 7 °C

Model EQ 2014 EQ 3014 ES

Inlet air temperature -5 ÷ 43 °C -5 ÷ 43 °C

Water temperature (heat pump) 9 ÷ 60 °C 9 ÷ 60 °C

Installation room temperature 5 ÷ 35 °C 5 ÷ 35 °C

Minimum volume of room installation 30 m3 30 m3

Components and dimensions

Model EQ 2014

Model EQ 3014 ES

1 Auxiliary electric heater 1.5 kW

B Electronic anode protection

C Storage water discharge

D Inlet sanitary cold water

E Output sanitary hot water

F Condensation discharge

G Safety valve pressure & temperature (P&T)

H Inlet for solar panel

I Output for solar panel

J Inlet water recirculation

K Inlet air Ø 160 mm

L Outlet air Ø 160 mm

M Passage of electric cables

N Control panel

590

275460

1730

420

16,5

92,5

370

9501050

884

��

��

�

�

�

�

80

575

380

220

590

190

150

�

�

�

664

1804

253

16,5

107,

525

3

96211

12

733

563

35337

056373

3

�

�

�

�

��

�

�

��

��

410

290642

664

150

190

��

�

Inlet air

Inlet air

Outlet air

Outlet air

Rev.

A -

09.2

017

- Uffi

cio

Pubb

licità

& Im

mag

ine

- BT

EMMETI spa - Via Brigata Osoppo, 166 - 33074 Vigonovo frazione di Fontanafredda (PN) - ItaliaTel. 0434.567911 - Fax 0434.567901 - www.emmeti.com - info@emmeti.com

Accessories (supplied separately)

EPE gray pipe Internal Ø 160 mm L = 2 m

ABS black tee int. Ø 160 mmwith diverter valve

Elbow 90° EPE grayInternal Ø 160 mm

Elbow 45° EPE grayInternal Ø 160 mm

Respect the environment!For a correct disposal, the different materials must be divided and collected according to the regulations in force.

Emmeti copyrightAll rights are reserved. This publication nor any of its contents can be reproduced or publicized without Emmeti’s written authorization.

The data contained in this publication are subject to change in every time, for technical and commercial requirements.

Emmeti are not responsible for eventual errors or inexactitudes.

9900595800001

PVC ivory pipeØ 160 mm L = 1 m

230 V - 30A active energy meter

for DIN 1M tracks

PP couplingfor EPE pipe

Internal Ø 160 mm

PP fixing collarfor EPE pipe

Internal Ø 160 mm

Wall-mounted external grids assembly for air inlet and outlet,

including springs and chains

FEBOS, Single-phase and Three-phase versions (*)

(*) To use with single-phase heat pump and three-phase electrical system

Tablet touchscreen 7”

Operating System Android