10

DescriptionECOA AL Series Lift Tables

are pneumatically operatedscissor lifts with capacities of2,000 to 4,000 lbs., and travelsdistances of 12 to 24 inches.Standard Features■ AL Series lifts have chrome-plated rollers entrapped withinbase frame and platform forsuperior stability, enhanceddurability, and trouble freeoperation. ■ Durable 2-ply, 3-convoluted,rubber air spring actuator(s)comes with lifetime warranty.

■ Heavy duty welded constructiondesigned with a 3-to-1 safetyfactor, complies with ANSI MH29.1- 1994.■ PTFE (Teflon) lined, lifetimelubricated, composite bearings atall wear points. Hardened chromeplated pins used at all bearingsurfaces. ■ Scissor legs bolted to base frameand platform at fixed (clevis) end,for enhanced maintainability andease of disassembly, if required.■ Removable roller gibs facilitatemaintenance operations, and allowfor ease of disassembly, if required.

■ Pedestal mounted up/downcontrol valve with 10' of 1/2"pneumatic hose standard, optionalfoot operated control valve available.■ Adjustable Hydraulic Damperprovides positive load control.■ Adjustable down flow control, andpressure relief valve, assure safeoperation in the event of an airlinerupture, or overloading of lift.■ Surfaces degreased, oxide primed,finished with durable enamel.■ Entrapped upper and lower rollersfor greater stability■ Pneumatically powered by aheavy-duty air spring

■ Durable enamel fin i s h■ Hinged safety maintenanceb a r s■ ANSI MH29.1-1994 safetyc o m p l i a n c e■ Mechanical stops for ‘up’t r a v e l■ Hand or foot control

Limited Warranty PolicyRefer to Warranty Form for

s p e c i fic details.S p e c i fications are subject

to change without notice.AL Series Lift Tables are one

of a group of ECOA Lift Tables.

Medium-Duty,Pneumatic 2,000 to 4,000 lb.Capacity

AL-020-24-25048

Model Number FormatAL - 020 - 24 - 25048

Series “AL”Pneumatic Lift TableCapacity020 = 2,000 lbs.Vertical Travel24 = 24 inchesPlatform Size25048 = 25"W x 48"L

A i rLift™

ECOA AL Series Pneumatic Scissor Lift Tables

AT Standard Features■ Pneumatically powered bya heavy-duty air spring■ Hinged maintenance bars■ Dual safety chains■ ANSI MH 29.1-1994 safetyc o m p l i a n c e■ High performance lifetimeself-lubricating bushings■ Motion stabilizer

■ Pressure relief valve■ Hand or foot control■ 42'' high pedestal for hand control

■ Pit mounted units withbeveled toe guards■ Accordion bellows

O p t i o n s■ Stainless steel top■ Custom colors

■ Ball transfer top■ Roller conveyors

AL Series

Trave l M o d e l C a p a c i t y Edge Lo a d* Platform Sizes B a s e H e i g h t U p Air Bags S h i p *M a x i m u m ( I n c h e s ) Fram e ( I n c h e s ) S p e e d s ( Q t y . ) W e i g h t( p o u n d s ) S t a t i c R o l l i n g S t a n d a r d Max imu m ( I n c h e s ) Lo w e r e d R a i s e d (s e c o n ds) (po u n ds)

1 2 " A L - 0 2 0 - 1 2 2 , 0 0 0 2 0 0 0 1 2 8 0 2 51⁄4 x 36 48 x 60 2 43⁄4 x 351⁄4 8 2 0 * * 1 7 9 52 4 " A L - 0 2 0 - 2 4 2 , 0 0 0 2 0 0 0 1 2 8 0 2 51⁄4 x 48 48 x 72 2 43⁄4 x 471⁄4 8 3 2 * * 1 9 8 52 4 " A L - 0 4 0 - 2 4 4 , 0 0 0 4 0 0 0 2 6 8 0 41 x 48 60 x 72 4 01⁄2 x 471⁄4 8 3 2 * * 2 1 , 1 2 0

ALTT Air Lift and Manual Turn Series1 2 " A L T T - 0 2 0 - 1 2 2 , 0 0 0 0 * * 0 * * 37 x 37 48 x 48 2 43⁄4 x 351⁄4 1 11⁄4 2 31⁄4 – 1 9 8 52 4 " A L T T - 0 2 0 - 2 4 2 , 0 0 0 0 * * 0 * * 37 x 37 48 x 48 2 43⁄4 x 471⁄4 1 11⁄4 3 51⁄4 – 1 1 , 1 0 52 4 " A L T T - 0 4 0 - 2 4 4 , 0 0 0 0 * * 0 * * 41 x 48 60 x 60 4 01⁄2 x 471⁄4 1 11⁄4 3 51⁄4 – 2 1 , 2 5 5

*Standard platforms only. **Up-speeds will depend on available air supply, flow rate & supply pressure. Oversized platforms, beveled toeguards, roller shades,and accordion skirting will affect overall size. See page 21 for options and accessories. Conforms to or exceeds ANSI standard MH29.1-1994.

Selector Chart for AirTilt Series TablesM o d e l C a p a c i t y Tilt Angle Platform Sizes (Inches) Lowered Height Tilt Time W e i g h t

( p o u n d s ) ( d e g r e e s ) S t a n d a r d Max imum (Inches) ( s e c o n d s ) * ( p o u n d s )A T - 2 0 2 , 0 0 0 3 5 36 x 48 48 x 60 8 * 5 2 5A T - 4 0 4 , 0 0 0 3 5 48 x 48 60 x 60 8 * 6 0 0

Options and AccessoriesM o d e l D e s c r i p t i o nA L - F T - C O N T (2) Two pedal air foot operated controls with base plate and 10' of pneumatic hose for “AirLift” units only.T T - D E T C - X X Spring activated detents for manual turntable at 45*, 90* or 180* degrees with roller and cam.T T - D E T S - X X Automatic cam detents for manual turntable at 45*, 90* or 180* degrees with roller and cam.T T - R D Round Platform instead of standard square for manual turntable.T T - S U B B A S E Sub-base mounted under unit for increased lowered and raised height.T T - C S T 3"x3"x3" corner stops mounted to all four corners of deck top.

*Actual tilt times depend on available air supply, flow rate and supply pressure.