Poultry Market Catalog

ECP SERIES NON-AUTOMATIC DESIGN FOR POULTRY EVAPORATIVE COOLING APPLICATIONS

Durable, powder-coated epoxy cast iron • construction

Glass-filled polypropylene base Glass-filled polypropylene base•

Stainless steel lifting handle and bolts Stainless steel lifting handle and bolts•

Non-clogging thermoplastic vortex impeller design Non-clogging thermoplastic vortex impeller design•

Passes 1/2” spherical solids Passes 1/2” spherical solids•

Oil-filled, hermetically sealed, automatic reset Oil-filled, hermetically sealed, automatic reset • thermal overload protected motorthermal overload protected motor

Silicon carbide / carbon seal•

Upper sleeve bearing and lower ball bearing • running in bath of oil

20 ft. UL listed power cord with molded 3-wire • plug

1-1/2” NPT vertical discharge•

Operates at temperatures to 130˚ F (54 C˚)•

C US

Tested to UL Standard UL778and Certifi ed to CSA

Standard CSA22.2 No. 108

FW0134 0409

Supersedes 0109

ECP Performance

Model No.

HP Volt Amps HzGallons Per Minute Lift

Capacity Shut Off Ft.

Total Ht.Total

WidthWt. Lbs.

Discharge NPT

5 Ft. 10 Ft. 15 Ft.

ECP301.30

115 9.7

60

47 37 25 20.5 10.063” 10.006” 22.4

1-1/2”

ECP302 230 4.8

ECP331.33

115 6.055 50 43 32 11.688”

10.094”

32.0ECP332 230 3.2

ECP401.40

115 8.569 64 55 39

12.125”

37.0ECP402 230 4.3

ECP501.50

115 10.577 70 61 44 39.0

ECP502 230 5.3

Features and Benefits

2 MMoving water . . . MMOne customer at a time.MM

Poultry Market Catalog

1/6 & 1/4 HP SUBMERSIBLE EVAPORATIVE UTILITY PUMPS

115V thermal overload protected PSC motor, • 1.5 amps

Environmentally friendly, oil-free motor runs • cooler and lasts longer

Thermoplastic body resists corrosion, stress • and heat

Vent hole prevents air lock•

1” male discharge with garden hose adapter • for easy hookup

Pumps floor dry to 1/8”; fits into 7” opening•

9’ double-sealed cord standard on UTFAL. •

Temperature rating: 120°F (49°C)•

1-year limited warranty•

2SUEL 1/4 HP

Automatic operation: Runs when • water is present, shuts off when dry

Environmentally friendly, oil-free • motor runs cooler and lasts longer

Thermoplastic body resists corrosion, • stress and heat

Vent hole prevents air lock•

1” male discharge with garden hose • adapter for easy hookup

Pumps floor dry to 1/8”; fits into 7” • opening

9’ double-sealed cord standard •

1-year limited warranty•

Automatic Operation

UTFAL 1/4 HP

50TC1/2 HP

Non-cloggingNooooooooonnnnnnn-----ccccclllllooooogggggggg

Vortex

Impeller

Rugged oil filled .4 HP, 115V, 60 Hz. • motor

Thermal overload protects against • overheating

Epoxy coated, cast iron design • dissipates motor heat to ensure long life

2” discharge with 2” solids pumping • capacity

Bottom suction inlet with vortex • impeller

15’ waterproof power cord with • grounded plug

Silicon carbide seal for reliable service • and extended life

Temperature Rating: 130ºF. (54ºC.)•

One year limited warranty•

1/2 HP SUBMERSIBLE EVAPORATIVE COOLING PUMP

Model HP

Gallons Per Minute Lift Capacity

5 ft. 10 ft. 15 ft. 20 ft.

50TC 1/2 128 89 50 10

Developed for pressure • booster application in poultry house misting.

Rugged cast iron pump case • and ejector. Carbon/ceramic shaft seal.

1/2 and 3/4 HP 60 Hz., Single •

Phase, Dual Voltage Nema J Motor

Includes: special nozzle and • venturi, 1-1/4” x 3/4” reducer bushing, 200 lb. pressure gauge and 8 ft. power cord.*

POULTRY HOUSE MISTING PUMP1/2 and 3/4 HP Single Phase

Models CPH051622 and CPH071726

3MMoving water . . . MMOne customer at a time.MM

Poultry Market Catalog

BOOSTER PUMPS CJ103 SERIES

Available in 1/3 HP thru 2 HP models.•

Rugged cast iron volute •

Brass impellers electronically balanced.•

Discharge can be rotated for either horizontal or vertical • Installations.

Designed for easy service without disrupting suction or • discharge piping.

CAPACITIES TO 80 GPM, PRESSURES TO 45 PSI

CENTRIFUGAL BOOSTER PUMPS

C USUL Std. No. 778

MULTI STAGE HIGHER PRESSURE CJ101 SERIES

Brass Impellers dynamically balanced for high • efficiencies and long life.

More water at higher pressures -engineered for high • head applications.

Cast iron volute with brass insert bearing and closed • top bearing for rugged durability and long life.

Available in 2-stage or 3 stage models up to 3 HP.•

Maximum case pressure of 160 PSI.•

CAPACITIES TO 60 GPM, PRESSURES TO 95 PSI

C USUL Std. No. 778

Product may not be as shown

10” FILTER HOUSINGSModel

Number Pipe Size SumpMax

Pressure Case Qty.*Included

O-Ring † Bracket † WrenchFH1034O-12 3/4” Opaque

100 PSI 12 FHOR1B FHMB02 FW10FFH1034C-12 3/4” Clear

10” FILTER HOUSINGS (VALVE-IN-HEAD)Model

Number Pipe Size SumpMax

Pressure Case Qty.*Included

O-Ring † Bracket † WrenchFH1034VH-12 3/4” Clear 100 PSI 12 FHOR1B FHMBU1 FW10F

10” POLYPROPYLENE STRING WOUND

Part No. Construction TypeMicron Rating

Maximum Flow (gpm) Application Case Qty.*

SW1005-24String Wound

5 10Dirt Rust Sediment

24SW1010-24 10 10SW1020-24 20 10

FILTER HOUSINGS AND CARTRIDGES

Full line of fi lter housings from 3/8” to 1-1/2” inlet and outlet. All housings shipped with pressure relief valve. All fi lter

housings include wrench, mounting bracket and extra o-ring.

BRACKETS, WRENCHES AND O-RINGSPart Number Description

FHMB02 Mounting Bracket and ScrewsFW10F Full Wrench - 10” Housings

FHMBU1 U-Shaped mounting bracket and screws

Flint & Walling, Inc. • 95 North Oak Street • Kendallville, IN 46755800-345-9422 • Fax: 260-347-0909 • www.flintandwalling.com

4 MMoving water . . . MMOne customer at a time.MM

Poultry Market Catalog

Flint & Walling’s service plus • 56-frame, NEMA J, dual voltage motors—single or three phase.

Three-wire, 8 foot 115 volt • grounded power cord and plug supplied on 1/3 HP single phase models. (Not supplied on any other model).

Thermoplastic impellers and • diffusers.

Cast Iron Model Pump Components—Cast Iron suction and discharge castings, S.S. pump shell, 416 S.S. hex pump shaft and carbon/ceramic seal with Buna N rubber parts.

Powder Coated Model Pump Components—Powder coated cast iron suction and discharge castings, S.S. pump shell, 416 S.S. hex pump shaft and carbon/ceramic seal with Buna N rubber parts.

Stainless Steel Model Pump Components—S.S. suction and discharge castings, S.S. pump shell, 303 S.S. hex pump shaft and carbon/ceramic seal with Viton rubber parts.

Booster Pump with F&W NEMA J Motor

PRESSURE BOOSTER “PB” SERIES PUMPS 1/3 - 3 HP • 5, 7, 10, 19, 27, 35, 55 & 85 GPM

Applications: Pressure Cleaning, Spray or Mist Systems, Jockey Pumps, Booster Service, Reverse Osmosis, Water Circulation and General Purpose Pumping.

PRESSURES TO 200 PSI— 140°F MAXIMUM LIQUID TEMPERATURE

C USUL Std. No. 778

ENGINEERED POULTRY PUMPING SYSTEMSDeliver Flow and Pressure Where You Want It!

Engineered boosting system provides constant water • pressure. (System can be adjusted for pressure.)

Pre-plumbed, pre-wired, pre-programmed and • pressure tested

Typical installation time less than 1 hour•

Skid mounted system is “powder coated” to resist rust•

Models available from 50 to 200 gallon per minute•

2 HP thru twin 7.5 HP•

Operates on 230v single phase power•

Small footprint fits through any 35” access door•

Advanced “on board” diagnostics • and pump protection

Variable frequency drive (VFD) soft starts motor for • long life

Significantly less electrical consumption over • conventional centrifugal pump applications.

System includes priming port, check valve & unions.•