17
‘Easy on the Environment. Easy on You.’ Integrated solutions that wash surfaces, recover contaminants and recycle water. ECO Cleaning Systems - Proprietary Information 2010 Product Line

Ecs Product Line

Embed Size (px)

DESCRIPTION

Integrated solutions that wash surfaces, recover contaminants and recycle water.

Citation preview

Page 1: Ecs Product Line

‘Easy on the Environment. Easy on You.’

Integrated solutions that wash surfaces, recover contaminants and recycle water.

ECO Cleaning Systems - Proprietary Information 2010

Product Line

Page 2: Ecs Product Line

ECO Cleaning Systems - Proprietary Information 2010

HRC-D10D54HS(shown)

Page 3: Ecs Product Line

ECO Cleaning Systems - Proprietary Information 2010

Pressure to: 4,000 PSI / 191.5 kPa Recovery to: 400 FT / 122 m Recycling to: 10 GPM / 37.8 LpM

Engine: 56 HP / 41.8kW, 4 Cyl., Diesel Vacuum: 450 CFM, 15 In/Hg, Positive Displ. Pumps (dual): 5 GPM, 4,000 PSI /

18.9 LpM,191.5 kPa Heaters (dual): 230 VAC, 100+Deg rise@5 GPM /

18.9 LpM, Horizontal Generator: 115/230 VAC, 4,000 Watt

Filtration:Gross to 5/32” / 25.4 mm DiaHydrocarbon SolidificationFines to 5µChemical/Dirt EncapsulationEncapsulation Removal to 3µFinal to 1µ

Controls:Solid-StateFusedProgrammed Process ControlProgrammed Safety ShutdownProgrammed Maintenance

Hoses:Pressure – 800 FT / 122 mVacuum – 800 FT / 122 m

Gun/Wand: 3’ / .9 m, SST Flat Surface Head: 24” / .61 m, SST,

w/vacuum recovery

Fuel, Diesel: ~50Gal / ~1.89 hL Water: ~300Gal / ~11.35 hL Size: 5.5’W x 10.5’L x 3.5’H /

1.7 m W x 3.2 m L x 1.1 m H Weight: ~3,000 Lb Dry, ~6,500 Lb Wet /

~1,361 Kg Dry, ~2,948 Kg Wet

HRC-D10D54HS Specifications

Page 4: Ecs Product Line

ECO Cleaning Systems - Proprietary Information 2010

HRC-D05D54HS(similar to shown)

Page 5: Ecs Product Line

ECO Cleaning Systems - Proprietary Information 2010

Pressure to: 4,000 PSI / 191.5 kPa Recovery to: 400 FT / 122 m Recycling to: 10 GPM / 37.8 LpM

Engine: 56 HP / 41.8kW, 4 Cyl., Diesel Vacuum: 360 CFM, 15 In/Hg, Positive Displ. Pump: 5 GPM, 4,000 PSI /

18.9 LpM, 191.5 kPa Heate: 230 VAC, 100+Deg rise@5 GPM / 18.9 LpM,

Horizontal Generator: 115/230 VAC, 4,000 Watt

Filtration:Gross to 5/32” / 25.4 mm DiaHydrocarbon SolidificationFines to 5µChemical/Dirt EncapsulationEncapsulation Removal to 3µFinal to 1µ

Controls:Solid-StateFusedProgrammed Process ControlProgrammed Safety ShutdownProgrammed Maintenance

Hoses:Pressure – 400 FT / 122 mVacuum – 400 FT / 122 m

Gun/Wand: 3’ / .9 m, SST Flat Surface Head: 24” / .61 m, SST,

w/vacuum recovery

Fuel, Diesel: ~50 Gal / ~1.89 hL Water: ~300 Gal / ~11.35 hL Size: 5.5’W x 10.5’L x 3.5’H /

1.7 m W x 3.2 m L x 1.1 m H Weight: ~2,500 Lb Dry, ~6,000 Lb Wet /

~1,134 Kg Dry, ~2,722 Kg Wet

HRC-D05D54HS Specifications

Page 6: Ecs Product Line

ECO Cleaning Systems - Proprietary Information 2010

Our HVR systems are automated stand-alone units for the recovery andrecycling of contaminated wastewater, from up to four hundred feet away.

Available in 5 and 10 gallons per minute recovery, the HVR systems employthe ECO Cleaning Systems proprietary six stage filtration process to purifyrecovered wastewater down to one micron for on-site reuse.

HVR systems capture hydrocarbons, heavy metals and other hazardouschemicals then transform them into non-leachable substances, the vastmajority of which meet EPA guidelines for acceptable disposal in generallandfills.

HVR (HydroRecoverRecycle)

Page 7: Ecs Product Line

ECO Cleaning Systems - Proprietary Information 2010

Our HV systems are stand-alone units for the recovery of contaminatedwastewater at either 5 or 10 gallons per minute.

HV systems are standard with a three stage filtration system to remove grosscontaminants and hydrocarbons, which are solidified for proper disposal. Inaddition, an optional automated pump-out system is available for the HVsystems to pump recovered wastewater to a secondary holding tank or to asanitary drain system when applicable.

These units fulfill basic compliance with the US Clean Water Act; when usedproperly.

HV (HydroRecover)

Page 8: Ecs Product Line

ECO Cleaning Systems - Proprietary Information 2010

Our HR systems are automated stand-alone units for the recycling ofcontaminated wastewater.

Available in 5 and 10 gallons per minute recycling, the HR systems employ theECO Cleaning Systems proprietary six stage filtration process to purifyrecovered wastewater down to one micron for on-site reuse.

HR systems capture hydrocarbons, heavy metals and other hazardouschemicals then transform them into non-leachable substances, the vastmajority of which meet EPA guidelines for acceptable disposal in generallandfills.

HR (HydroRecycle)

Page 9: Ecs Product Line

ECO Cleaning Systems - Proprietary Information 2010

Our HCV systems are integrated cleaning units with automated recovery ofcontaminated wastewater at either 5 or 10 gallons per minute.

HCV systems are standard with a three stage filtration system to removegross contaminants and hydrocarbons, which are solidified for properdisposal.

In addition, an optional automated pump-out system is available for the HCVsystems to pump recovered wastewater to a secondary holding tank or to asanitary drain system when applicable.

These units fulfill basic compliance with the US Clean Water Act; when usedproperly.

HCV (HydroCleanRecover)

Page 10: Ecs Product Line

ECO Cleaning Systems - Proprietary Information 2010

These ‘industrial’ surface cleaning systems are designed to run all day, everyday with minimal maintenance or upkeep.

The key to our HC systems are industrial timing belt drives that rarely; if ever,need adjustment or wear out, and never slip.

The controls of the HC systems include engine/motor and pump safetysystems.

These surface cleaning systems are available in both 5 and 10 gallon perminute sizes, with the option of hot water.

HC (HydroClean)

Page 11: Ecs Product Line

ECO Cleaning Systems - Proprietary Information 2010

Our HCW automated wash systems are designed to clean the undercarriageof buses and trucks and then apply a salt neutralizing chemical during wintermonths.

The key to the HCW systems are no-touch operation.

The control system senses vehicle location providing automated operation.

HCW systems include engine/motor and pump safety systems.

The HCW systems operate at 15 gallon per minute sizes, with the option ofhot water.

HCW (HydroCarriageWash)

Page 12: Ecs Product Line

ECO Cleaning Systems - Proprietary Information 2010

Our HW heads are optimized stainless steel units that employ large casters, atri-arm rotating cleaning head, and a proprietary vacuum attachment for near‘absolute’ recovery of contaminated wastewater.

Our HW heads allow surface cleaning to within 1-1/2” of cardboard boxeson flat concrete at 4,000 PSI without getting the boxes wet!

HW heads are available in 5 and 10 gallons per minute sizes.

HW (HydroWhirl)

Page 13: Ecs Product Line

ECO Cleaning Systems - Proprietary Information 2010

Our HCC remote controlled, chemical changeover systems are available forsingle or multiple chemical use.

HCC systems are trigger-gun activated, can be used with up-stream or down-stream injectors, and are available in 12 & 24 VDC as well as 120 & 240 VACinput/output.

HCC (HydroChemicalChangeover)

Page 14: Ecs Product Line

ECO Cleaning Systems - Proprietary Information 2010

Our HCS system automates the manual cleaning of shopping carts, acting asa miniature car was tunnel.

As the carts are pushed through the HCS for cleaning, the water is recoveredand recycled by our HRC system or recovered only by our HCV system.

HCS systems are designed to work with 10 gallon per minute surface cleaningsystems with hot water.

NOTE: The HCS portable system is specifically designed to work inconjunction with our HRC or HCV systems.

HCS (HydroCartSanitizer)

Page 15: Ecs Product Line

ECO Cleaning Systems - Proprietary Information 2010

Special consideration has been taken in regard to the life cycle of all ECOCleaning Systems products, resulting in systems that require minimalfilter replacement. Filters and other supplies are available throughoutside retailers or through ECS.

In addition, ECS is committed to bringing the surface cleaning industryunparalleled support and customer service.

ECS Founder & Director of Product Development; Brent R. Kaiser, ispersonally available to field questions and concerns at (419) 797-6624 [email protected].

Filtration Supplies & Customer Support

Page 16: Ecs Product Line

ECO Cleaning Systems - Proprietary Information 2010

ECO Cleaning Systems offers the industry standard of one year parts andservice warranty on all of its products.

All major ECS parts and components are certified by their manufacturersfor use in ECS products and covered by individual manufacture warranties.

Warranty Information

Page 17: Ecs Product Line

ECO Cleaning Systems - Proprietary Information 2010

Product Lineof

629 N Hidden Harbor Dr Phone: 1.419.797.6624Port Clinton, OH 43452 Fax: 1.419.797.6623

[email protected]

‘Easy on the Environment. Easy on You.’

Integrated solutions that wash surfaces, recover contaminants and recycle water.