edge 3form · Contour, Fan, Stepped, Angle, Arc, Diagonal, Jagged, Hourglass. Fins can be installed in various sequences to provide a unique aesthetic within each configuration. Also,

1MAY 7 2018 | MAN-036 | MATSPEC - EDGE | REV 015

FEATURES AND BENEFITS

• Many beautiful design options

• Extremely easy to assemble and disassemble

• Very tough and durabable AVAILABLE COLORS

Edge is made from ¼” Varia Ecoresin, or Sola Felt. Visit www.3-form.com/Edge for all available options.*The Varia Ecoresin system panels utilizing natural products as a decorative interlay-ers may change in appearance over time. Natural materials are also subject to inher-ent inconsistency in color, texture and shape.

TEXTURES/FINISHES

3form Edge in Varia Ecoresin comes standard with both a front and back Sandstone finish. Sandstone is a durable finish that has a subtle grainy texture with a slightly frosted look.

PANEL SIZES AND TOLERANCES

Linear patterns in Varia Ecoresin panels have a skew tolerance of 1/4" skew over 48”. Panels containing a pattern (Capiz, Timber, etc.) will not match up from piece to piece.

Edge materials are cut to a tolerance of ±1/32”.

FLATNESS TOLERANCE

Edge panels shall not have distortion in the form of a wrinkle, twist or scallop along the perimeter of the sheet. Overall warp extend-ing across the sheet is permitted to a maximum of 9/32" (7.14 mm) for each 48" (1.2 m) or fraction thereof. Panel is to be measured when laying horizontally under its own weight on a flat continuous surface.

Material SpecificationsFLAMMABILITY & SMOKE TEST RESULTS – BUILDING CODE APPROVALS

Edge fins have been independently tested and meet the criteria for approved interior finishes and light transmitting resin materials as described in the 2015 International Building Code®.

TEST 3FORM VARIA ECORESIN RESULT

ASTM D 2843 Smoke Density 71.6% PASS Less than 75

ASTM D 635 Flame Spread Self extinguishing PASS CC1

ASTM D 1929 Self-ignition 716°F PASS Greater than 650°F

Product DescriptionPlay with Varia in a whole new way with Edge. The easy-to-install, modular system comes in nine configura-tions, and can be customized to fit any space – as a wall treatment, ceiling element, or partition system.

TEST 3FORM VARIA ECORESIN RESULT

UL94 Flame Class - HB PASS

UPITT Mortality Test PASS Not more toxic than wood

ASTM E84-03Flame Spread, 1/4" thicknessSmoke generated

65425

Class B: 26-75≤450

NFPA 2861/4" thickness Pass Pass

TEST FELT RESULT

ASTM E84-03Flame Spread, 1/4" thicknessSmoke generated

1055

Class A: 0-25≤450

CAN/ULC 102.2 TRIPLICATE 1/4”Rounded Flame Spread (FSR)Rounded Smoke Developed (SDC)

75200

ACOUSTIC RATING MATERIAL NRC SAA ALPHA-W

Varia Ecoresin N/A N/A N/A

Felt 0.45 0.46 0.45

WEIGHT MATERIAL THICKNESS (INCHES) WEIGHT FLUX (LB/FT2)

Varia Ecoresin 1/4" (6.3 mm) 1.7 lb/ft2 (8.3 kg/m2)Felt 1/4” (6.3 mm) 0.3 lb/ft2 (1.46 kg/m2)

USAGE LIMITATIONS

DO NOT use cyanoacrylate or solvent type thread locking materials with Varia Ecoresin. To more permanently secure hardware, use the recommended products from the 3form Adhesives Matrix.

EDGE SEALING (VARIA ECORESIN ONLY)

Certain Varia Ecoresin designed layers (organics, papers and fab-rics in particular) can wick moisture over time if the edges become wet and are not adequately sealed. These Varia Ecoresin products should not be exposed to water or wet conditions without first ap-plying an approved edge sealing treatment.

Cleaning Instructions (Varia Ecoresin)3form Varia Ecoresin fins should be cleaned periodically. A regular, seasonal cleaning program will dramatically help prevent notice-able weathering and dirt build-up. 3form recommends the use of the following common cleaning products: Windex, Formula 409, Simple Green, Fantastik, Virex, 10:1 Water/Bleach Solution.

edge™ 3form


Rinse the sheets with lukewarm water. Remove dust and dirt from Varia Ecoresin with a soft cloth or sponge and a solution of mild soap and/or liquid detergent in water. A 50:50 solution of isopropyl alcohol and water also works well. Rinse thoroughly with lukewarm water.

Always use a soft, damp cloth to blot dry. Rubbing with a dry cloth can scratch the material and create a static charge. Never use scrapers or squeegees on Varia Ecoresin. Also avoid scouring com-pounds, gasoline, benzene, acetone, carbon tetrachloride, certain deicing fluids, lacquer thinner or other strong solvents. Do not use a squeegee, strong solvents, highly alkaline or abrasive cleaning agents. Do not rub with a dry cloth.

Cleaning Instructions (Sola Felt)To remove airborne debris and dust, it is recommended to periodi-cally vacuum Sola Felt fins. Please note the slight shedding of fibers from the Felt is normal and not indicative of any defect.

IMPORTANT

If a cleaning material is found to be incompatible in a short-term test, it will usually be found to be incompatible in the field. The converse, however, is not always true. Favorable performance is no guarantee that actual end-use conditions have been duplicated. Therefore, these results should be used as a guide only and it is recommended that the user test the products under actual end-use conditions.

SpecificationsEdge fins come in nine standard configurations – Uniform, Contour, Fan, Stepped, Angle, Arc, Diagonal, Jagged, Hourglass. Fins can be installed in various sequences to provide a unique aesthetic within each configuration. Also, customization of the fin size is available.

Edge is available as a wall, ceiling, or partition installation. Each of the nine fin configurations are identical for wall and ceiling. Pari-tion is two sided so the look is similar on both sides. See Page 4 for details.

WALLS

Each configuration shows two ReadytoGo solutions with a result-ing footprint of 84” wide x 96” high. These are made from two side by side modules, each 42” wide x 96” tall.

EDGE UNIFORM (WALL & CEILING)

CONTOUR (WALL & CEILING)

FAN (WALL & CEILING)

STEPPED (WALL & CEILING)

FAN CONFIGURATION (WALL) CONTOUR CONFIGURATION (WALL)

CONFIGURATION AC01.C02.C03.C04.C05.C06.C07.C08.C09.C10.C11.C12.C13.C14.C15.C16

CONFIGURATION BC13.C14.C15.C16.C01.C02.C03.C04.C05.C06.C07.C08.C09.C10.C11.C12

CONFIGURATION CC04.C15.C03.C12.C01.C06.C07.C13.C16.C02.C14.C05.C09.C11.C08.C10

CONFIGURATION AF08.F07.F06.F05.F04.F03.F02.F01.F09.F10.F11.F12.F13.F14.F15.F16

CONFIGURATION BF04.F03.F02.F01.F09.F10.F11.F12.F13.F14.F15.F16.F08.F07.F06.F05

CONFIGURATION CF12.F07.F11.F01.F03.F08.F14.F04.F13.F16.F15.F02.F10.F06.F09.F05

REFERENCE: From «F01» to «F16» REFERENCE: From «C01» to «C16»









CONFIGURATION A

CONFIGURATION A

CONFIGURATION A

NUMBER LOCATION ON FINS

CONFIGURATION B

CONFIGURATION B

CONFIGURATION C

CONFIGURATION C

CONFIGURATION C

















UNIFORM CONFIGURATION (WALL) STEPPED CONFIGURATION (WALL)

CONFIGURATION AS05.S06.S07.S08.S08.S07.S06.S05.S04.S03.S02.S01.S01.S02.S03.S04

CONFIGURATION BS08.S07.S06.S05.S04.S03.S02.S01.S01.S02.S03.S04.S05.S06.S07.S08

CONFIGURATION CS01.S02.S03.S04.S05.S06.S07.S08.S08.S07.S06.S05.S04.S03.S02.S01

CONFIGURATIONU.U.U.U.U.U.U.U.U.U.U.U.U.U.U.U

REFERENCE: Only «U» REFERENCE: From «S01» to «S08»

UNIFORM CONFIGURATION (WALL) STEPPED CONFIGURATION (WALL)

CONFIGURATION AS05.S06.S07.S08.S08.S07.S06.S05.S04.S03.S02.S01.S01.S02.S03.S04

CONFIGURATION BS08.S07.S06.S05.S04.S03.S02.S01.S01.S02.S03.S04.S05.S06.S07.S08

CONFIGURATION CS01.S02.S03.S04.S05.S06.S07.S08.S08.S07.S06.S05.S04.S03.S02.S01

CONFIGURATIONU.U.U.U.U.U.U.U.U.U.U.U.U.U.U.U

REFERENCE: Only «U» REFERENCE: From «S01» to «S08»

CONFIGURATION A

CONFIGURATION B

U.U.U.U.U.U.U.U.U.U.U.U.U.U.U.U 4.3.2.1.1.2.3.4.5.6.7.8.8.7.6.5

1.2.3.4.5.6.7.8.8.7.6.5.4.3.2.1

8.7.6.5.4.3.2.1.1.2.3.4.5.6.7.8

8.7.6.5.4.3.2.1.9.10.11.12.13.14.15.16

4.3.2.1.9.10.11.12.13.14.15.16.8.7.6.5

12.7.11.1.3.8.14.13.16.15.2.10.6.9.5

1.2.3.4.5.6.7.8.9.10.11.12.13.14.15.16

13.14.15.16.1.2.3.4.5.6.7.8.9.10.11.12

4.15.3.12.1.6.7.13.16.2.14.5.9.11.8.10

The Contour pattern is made from (2) 48” x 96” panels with the fins labeled from 1 to 16.

The Fan pattern is made from (2) 48” x 96” panels with the fins labeled from 1 to 16.

MAXIMUM FIN DEPTH - 6.25” (158.7MM)




ANGLE (WALL & CEILING) JAGGED (WALL & CEILING)

ARC (WALL & CEILING) HOURGLASS (WALL & CEILING)

DIAGONAL (WALL & CEILING)

CONFIGURATION A CONFIGURATION A

CONFIGURATION A

CONFIGURATION A

CONFIGURATION B

1.2.3.4.5.6.7.8.8.7.6.5.4.3.2.1

CONFIGURATION B

CONFIGURATION B CONFIGURATION B

CONFIGURATION B

CONFIGURATION A

8.7.6.5.4.3.2.1.1.2.3.4.5.6.7.8

1.2.3.4.5.6.7.8.8.7.6.5.4.3.2.1

8.7.6.5.4.3.2.1.1.2.3.4.5.6.7.8

1.2.3.4.5.6.7.8.8.7.6.5.4.3.2.1

8.7.6.5.4.3.2.1.1.2.3.4.5.6.7.8

1.2.3.4.5.6.7.8.8.7.6.5.4.3.2.1

8.7.6.5.4.3.2.1.1.2.3.4.5.6.7.8

1.2.3.4.5.6.7.8.8.7.6.5.4.3.2.1

8.7.6.5.4.3.2.1.1.2.3.4.5.6.7.8


MAXIMUM FIN DEPTH - 9.25” (228.6MM) MAXIMUM FIN DEPTH - 9.25” (228.6MM)



EDGE UNIFORM (PARTITION) CONTOUR (PARTITION) FAN (PARTITION)

STEPPED (PARTITION) ANGLE (PARTITION)

JAGGED (PARTITION)

ARC (PARTITION)

HOURGLASS (PARTITION)DIAGONAL (PARTITION)

EDGE PARTITION

Designed to look the same as the edge wall and ceiling, but in a two-sided format. Please visit our website for more views of Edge Parti-tion.

8.7.6.5.4.3.2.1.1.2.3.4.5.6.7.8 8.7.6.5.4.3.2.1.1.2.3.4.5.6.7.8

1.2.3.4.5.6.7.8.8.7.6.5.4.3.2.1 1.2.3.4.5.6.7.8.8.7.6.5.4.3.2.11.2.3.4.5.6.7.8.8.7.6.5.4.3.2.1

U.U.U.U.U.U.U.U.

1.2.3.4.5.6.7.8

1.2.3.4.5.6.7.8.1.2.3.4.5.6.7.8.MAXIMUM FIN DEPTH - 12.00” (304.8MM) MAXIMUM FIN DEPTH - 16.50” (419.1MM) MAXIMUM FIN DEPTH - 16.50” (419.1MM)

MAXIMUM FIN DEPTH - 12.00” (304.8MM) MAXIMUM FIN DEPTH - 16.50” (419.1MM) MAXIMUM FIN DEPTH - 16.50” (419.1MM)

MAXIMUM FIN DEPTH - 16.50” (419.1MM) MAXIMUM FIN DEPTH - 16.50” (419.1MM) MAXIMUM FIN DEPTH - 16.50” (419.1MM)


COMPONENTS

Wall Installation InstructionsTOOL S

STEP 1. SET UP INSTALLATION STANDS STEP 2. INSTALL EDGE FINS INTO INSTALLATION STANDS

5.25” 5.25” 5.25” 5.25”

42.00”

1.50

”

1.50”

0.25”

0.25

6.00”42.00”42.00”6.00”

96.00”

10.50” 10.50”

FIN

QTY (2 )INSTALLATION

STANDS

RAIL

WALL MOUNT RAIL ORIENTATION

LEVELER

DRILL BITS

SCREW DRIVE R

TAPE MEASURE

Fold tabs and insert into hole on opposite side Rotate tab to insert into hole

Then insert the rails into the fins as shown. Insert bolt in next step Tighten M6 socket bolt to expand the railsSTEP 3. INSERT THE RAMPA THREADED INSERT STEP 4. INSERT M6 BOLT, EXPAND RAILS TO LOCK FINS INTO SLOTS

RAMPA INSERT - 3-70-020M6 X 18 BOLT - 3-70-019

WALL BRACKET3-70-016

RAIL BRACKET3-70-017

LIGHT WOOD STAIN - 3-70-013WHITE - 3-70-014

2.50”

2.75”

0.75”

0.88”


STEP 5. EXPAND THE RAILS TO LOCK THE FINS INTO THE SLOTS

STEP 6. MARK WALL FOR WALL BRACKET INSTALLATION

STEP 7. ATTACH WALL BRACKETS TO WALL USING MARKS STEP 8. ATTACH RAIL BRACKETS TO BACK OF EDGE RAIL

WALL ORIENTATION SHOWN ABOVE

Y6.

00”

42.0

0”42

.00”

6.00

”

X

9.50” 9.50”19.00”

42.00”

19.00”

X

X is the center of top rail position

X = 90.00’’+ Y *

b. Position the second anchoring point

Center Rail Brackets around largest holes on back of edge rail

overall installation

FLOOR

Use drywall anchors or screw directly into wall stud


STEP 6. HANG EDGE FINS ONTO WALL

6.2. Lift upwards above brackets, and then push backwards until there is contact with the wall



STANDS

Mending plate3-70-007Mending plate screw3-70-008

Edge Holder(3-70-015)

Set Screw(3-15-0776)

3mm Cable3-15-0723

Cable Coupler3-15-1639-K

COMPONENTS

Partition Installation InstructionsTOOL S

5.25” 5.25” 5.25” 5.25”

42.00”

1.50

”

1.50”

0.25” 6.00”42.00”42.00”6.00”

96.00”

10.50” 10.50”

FINRAIL

LEVELER

DRILL BITS

SCREW DRIVER

TAPE MEASURE


Fold tabs and insert into hole on opposite side Rotate tab to insert into hole

PARTITION MOUNT RAIL ORIENTATION

note: Requires (2) 4’ x8’ sheets

RAMPA INSERT - 3-70-020M6 X 18 BOLT - 3-70-019

Also the following are needed for installation: Concrete anchors (2-15-3011A), tensioner (3-15-1636-k)

LIGHT WOOD STAIN - 3-70-013WHITE - 3-70-014



S TEP 6. CABLE COUPLERS AND TENSIONERS POSITION AND INSTALLATION

21

12 3

45 6


PARTITION ORIENTATION SHOWN ABOVE

21” SPACINGBETWEEN CABLES


42

STEP 7. SUSPEND THE EDGE MODULE

STEP 8. CABLE TENSIONERS INSTALLATION


84

STEP 9 (OPTIONAL). CONNECT THE EDGE MODULE

A

B

A

B

B


Mending plate (optional)3-70-007Mending plate screw3-70-008

3mm Cabl e3-15-0723

Cable Coupler3-15-1639-K

COMPONENTS

Ceiling Installation InstructionsTOOL S

5.25” 5.25” 5.25” 5.25”

42.00”

1.50

”

1.50”

0.25”

0.25

6.00”42”42”6.00”

96.00”

10.50” 10.50”

FIN

RAIL

LEVELER

DRILL BITS

SCREW DRIVE R

TAPE MEASUR E


Fold tabs and insert into hole on opposite side Rotate tab to insert into hol e


STANDS

CEILING MOUNT RAIL ORIENTATION

Edge Holde r(3-70-015)

Set Screw

Anchors for ceiling are also necessary. Pick according to your substrate type.


(3-70-021)



96

42

STEP 6. SUSPEND THE EDGE MODUL E

12 3

Note: Make sure to leave 1” of extra cable as shown in Figure 3.

CEILING ORIENTATION SHOWN ABOVE

10.5

21

IMPORTANT!You must drill a 1/8” hole through the “C” shaped rail in order to hang the rail.


Instructions on how to shorten a section of Edge (walls)When less than the full width of Edge (<42”) is needed, you must cut down the rails of the edge product. Follow the instructions below for best results.

Step 1: Determine the number of fins needed (or your maximum length). See chart below.

# OF FINS DISTANCE (IN)

1* 5.25

2* 10.5

3* 15.75

4* 21.0

5 26.25

6 31.5

7 36.75

8 42

Step 2: If you are mounting next to another assembly of Edge, its important to identify the side of the rails that will meet up with the exist-ing fins. When you cut the rail, it will leave exposed wood, so this will need to be mounted against the existing system. If you are NOT mounting adjacent to another system, you will need to paint the side of the rail that is cut.

Step 3: Mark your rail for your desired cut. See dimensions above, based on the number of Fins you want.

Step 4: Install modified rail, with cut side facing existing Edge system.

*For rails with less than 4 fins, you must drill a new counterbored hole and through hole for the Rampa insert for expanding the rails.

1. First counterbore with a 1/2” diameter brad point drill bit to a depth of .375 inches (9.5mm).

2. Next drill all the way through with a 1/4” diameter brad point drill bit.

96

4242

STEP 7 (OPTIONAL). CONNECT THE EDGE MODUL E

Documents

edge 3form · Contour, Fan, Stepped, Angle, Arc, Diagonal, Jagged, Hourglass. Fins can be installed in various sequences to provide a unique aesthetic within each configuration. Also,