7/23/2019 EDGE Low Throughput

http://slidepdf.com/reader/full/edge-low-throughput 1/1

low EDGE/GPRS throughput from statistical view.1- Check you PDTCH utilization rate. If it is high than you can do the following:a- Increase PDTCH thresholdb- Check E1 idle timeslots. If less than 50 than you will have congestion on E1c-Check the nr of static PDTCH. Normally you should have 2-4 and they should bein the BCCH TRX.2- Check the C/I of the cell.In bad C/I you will get low throughput3- Check the TRX qualityIf your TRX is faulty than you cant expect good EDGE