EDMI Smart Metering Solutions

Smart Metering Solutions

EDMI is one of the world’s leading smart metering solutions providers.

We design, develop and manufacturetechnologically advanced digital meters andmetering systems for the global utility industry. Our range of innovative products includes digitalmeters, advanced infrastructure and energymanagement systems.

With over 30 years industry experience weensure all of our products are technologicallyproven and manufactured to the highest quality.The entire EDMI product range is reliable,upgradable and accurate.

We are proud of our extensive market knowledgeand are committed to pre and after salescustomer support. As an international company,we provide global strength and our localpresence enables us to respond quickly to thediverse needs of regional utility markets.

DigitalSmartMetersThe EDMI range of innovative

products includes digital meters,advanced infrastructure and energymanagement systems.

With over 30 years industryexperience, we ensure all of ourproducts are technologically proven and manufactured to thehighest quality.

Mk7BSmart Single Phase Electronic Revenue MeterAtlas Series — Class 1 and Class 2

DISCONNECT RELAY

MEASUREEVERYTHING

MODULAR PREPAYMENT SMARTREADY

OTAUPGRADABLE

The EDMI range of innovative productsincludes digital meters, advancedinfrastructure and energymanagement systems.

With over 30 years industry experience,we ensure all of our products aretechnologically proven andmanufactured to the highest quality.The entire EDMI product range isreliable, upgradable and accurate.

The EDMI Atlas platform forms the coreof each of the products in the EDMIsmart metering system. Designedaround a low power, yet powerful andflexible metering engine, all of theproducts share the same robust loggingand communications functionality.

76.21(ADJUSTMENT

RANGE)

92.49

24.70

46.00

ø5.0

9.18

170.43

119.65

39.48

65.00

104.80

130.34

Mk7BSmart Single Phase Electronic Revenue MeterAtlas Series — Class 1 and Class 2

Measurement

Δ Class 1 and Class 2 (MID Class B and Class A)

Δ Compliance with IEC 62052-11,62053-21, 62053-23

Δ Compliance with AS 62052.11,62053.21, 62053.23

Δ One Phase Two Wire with 120ADisconnect Switch

Voltage and Power Supply

Δ Nominal voltage: 220V – 240VΔ Operating range: 176V – 276VΔ Withstand: 0 – 288VΔ Frequency range: 45Hz – 65Hz

Current

Δ WC Range: 5/100A, 10/100AΔ WC Limit: 30 times Imax for 0.5

cycles, 7000A for three cyclesΔ Disconnect Relay: 120AΔ Disconnect Rating: IEC62055-31

UC3 @ Imax, 276 VAC

Measured Energy Values

Δ One element four quadrantΔ Import/Export/Absolute/Per

Quadrant: Wh, varh and VAhΔ W, var, VA, VRMS, IRMS,

Fundamental V, IΔ Power Factor, Frequency,

Phasor Angles

Power Quality Indication

Δ Total Harmonic Distortion (THD)Δ Waveform Download

SAG/SWELL

Δ Five Cycle ResolutionΔ Records time/date/phase/

duration/average and worstexcursion

Δ Programmable trigger levels

Inputs/Outputs Configuration

Δ Built-in S0 (27V, 27mA max) or Relay (240V, 2A) Output

Δ Two LED IndicatorsΔ Output Pulse Width:

1ms to 100msΔ Ripple ReceiverΔ Further I/O Expansion via PODs

Environmental

Δ Operating Range: -25˚C to 60˚CΔ Limit range: -40˚C to 70˚CΔ Storage range: -40˚C to 80˚CΔ Relative humidity: Up to

75% mean, 95% non-condensing for 30 days

Δ Ingress Protection: IP54 (without suction)

Time Clock and Calendar

Δ Accuracy (internal) within 15 seconds per month

Δ Backup time of 10 years withoutpower (Lithium Battery)

Δ Supports Daylight Saving Time and Gregorian or Persian calendars

Battery Options

Δ Internal batteryΔ External battery, under terminal

cover or inside POD

Large LCD Display

Δ Large seven segment displayΔ Display digit size: 9.3mm (H)Δ Up to 60 user-defined screens of

any meter parameterΔ Display available even without

mains powerΔ Screen ID is full alphanumeric,

five digitsΔ Option for backlight

Load Survey/Profile

Δ AMI ReadyΔ 2.1 megabytes of Non-Volatile

MemoryΔ Over 7200 days (20 years)

storage (two channels, 30 minute intervals)

Δ Up to 32 channels and twoindependent surveys

Δ Intervals programmable fromone to 60 minutes

Δ Energy, instantaneous readings,pulsing inputs as channel sources

Δ Ability to store average/minimum/maximum values for interval duration

Tamper Detection and Alarms

Δ Provision for sealing with conventional wire or plasticseals, meter is sealed for life

Δ Reverse current senseΔ Option for magnetic

tamper detectionΔ Advanced tamper detection

and loggingΔ Pre-programmed alarms for

meter self-checkΔ Alarms trigger LEDs,

enunciators, relay outputs or communications event

Δ Alarms are stored in event logs

POD System

Δ Interchangeable PODs for I/Oand communications

Δ Hot pluggable, automatedconfiguration

Δ Sealable separatelyΔ Robust TCP/UDP/IP/PPP GPRSΔ Standard POD options include:

√ GPRS modem with internalantenna + ZigBee SEP 1.x.

√ GPRS modem with externalantenna + ZigBee SEP 1.x. + 3 I/O

√ Other combinations includingRS232 and RS485

√ Ethernet + ZigBee SEP 1.x.

Software

Δ EDMI EziView software available for meter programming andreading (Windows 7/Vista/XP/2000)

Δ EDMI MultiDrive softwareavailable for large scale AMI andAMR solutions (Windows 7/Vista/XP/2000)

Δ Supported by many popularthird-party multi-vendor AMRsystems

Prepayment

Δ Credit or debit operationΔ Energy or currency basedΔ STS token compatible (IEC

62055-41)Δ Multiple energy sourcesΔ Eight rates per sourceΔ External debt repayment x2Δ Minimum charges, standing

charges and emergency creditΔ Configurable warnings and

indicators

Time of Use

Δ Up to 48 rates plus unified rateΔ Up to 32 separate import and

export registersΔ Daily, weekly, monthly, yearly and

specialΔ Up to 200 special days and eight

seasonsΔ Up to 61 previous billing periods

plus billing totalsΔ Block or rolling maximum

demandΔ Energy, pulsing inputsΔ Time of maximum demand

Security

Δ Multi-level security (Usernameand password includingencrypted log-in)

Δ Up to seven independentsecurity levels

Δ Up to six individual usersΔ AES128 bit encryption

Communications

Δ Up to three independentlyworking communication ports

Δ Optical port: FLAG (IEC 62056-21) or ANSI Type 2 (ANSI C12.18)

Δ Option for DLMS COSEM (IEC 62056)

Δ POD interface for easy fieldupgrade or replacement

Physical Dimensions

Δ Short cover: 180mm (H) x 131mm (W) x 65mm (D)

Δ Long cover: 210mm (H) x131mm (W) x 65mm (D)

Δ Weight: approx. 0.75 kg (0.95 kg with modem)

EDMI Europe LtdThe Grainger SuiteDobson HouseRegent CentreNewcastle upon TyneNE3 3PFUnited Kingdom www.edmi-meters.co.uk

Copyright © 2013 EDMI Limited. All Rights Reserved. Atlas is a registered trademark of EDMI Pty Ltd. EDMI’s Policy is one of continuous product development and the right is reserved to modify specifications contained herein without notice.

Tel: +44 (0)191 233 6322

Email: [email protected]@edmi-meters.co.uk

Mk7CSmart Single Phase Electronic Revenue MeterAtlas Series — Class 1 and Class 2

AMIAMI

READYDISCONNECT

RELAYLARGE DATA

STORAGELARGE

DISPLAYMEASURE

EVERYTHINGTAMPER PROOF




Mk7CSmart Single Phase Electronic Revenue MeterAtlas Series — Class 1 and Class 2

Measurement



Δ One Phase Two Wire withDisconnect Switch


Δ Nominal voltage: 220V – 240VΔ Operating range: 180V – 280VΔ Withstand: 0 – 290VΔ Frequency range: 45Hz – 65HzΔ Internal battery

Current

Δ WC Range: 5/100A, 10/100AΔ WC Limit: 30 times Imax for 0.5

cycles, 7000A for three cyclesΔ Disconnect Rating: IEC62055-31

UC3 @ Imax, 276 VAC


Δ One element four quadrantΔ Import/Export/Absolute/Per

Quadrant: Wh, varh and VAhΔ W, var, VA, VRMS, IRMS,

Fundamental V, IΔ Power Factor, Frequency,

Phasor Angles, temperature


Δ Total Harmonic Distortion (THD)Δ Waveform Download

SAG/SWELL

Δ Five Cycle ResolutionΔ Records time/date/phase/




Δ Up to four I/O total in IsolatedGroups (Max. 1 relay Output)

Δ Options include: Passive/ActiveInputs, SO/Relay Outputs

Δ Passive Input Voltage: 5V, 12V,48V, 110V, 240V

Δ Active Input Voltage: 12VΔ SO Output: 27V, 27mA maximumΔ Relay Output: 240V, 5A/2AΔ Two LED IndicatorsΔ Programmable Output Pulse

Width: 1ms to 100msΔ Ripple Receiver

Environmental

Δ Operating Range: -25˚C to 60˚CΔ Limit range: -25˚C to 70˚CΔ Storage range: -40˚C to 80˚CΔ Relative humidity: Up to


Δ Ingress Protection: IP54



Δ Backup time of 10 years withoutpower (Lithium Battery)

Δ Supports Daylight Saving Time and Gregorian or Persian calendars

Large LCD Display


any meter parameterΔ Display available even without

mains powerΔ Definable enunciators

Time of Use

Δ Up to eight rates plus unifiedrate

Δ Up to 32 separate import andexport registers

Δ Daily, weekly, monthly, yearly andspecial

Δ Up to 200 special days and eightseasons

Δ Up to 61 previous billing periodsplus billing totals

Δ Block or rolling maximumdemand

Δ Energy, pulsing inputsΔ Time of maximum demand

Load Survey/Profile

Δ AMI ReadyΔ 2.1 megabytes of Non-Volatile

MemoryΔ Over 7200 days (20 years)

storage (two channels, 30 minute intervals)

Δ Up to 32 channels two time-independent load surveys

Δ Intervals programmable fromone to 60 minutes

Δ Energy, instantaneous readings,pulsing inputs as channel sources

Δ Ability to store average/minimum/maximum values for interval duration


Δ Provision for sealing with conventional wire or plastic seals

Δ Reverse current senseΔ Option for magnetic

tamper detectionΔ Advanced tamper detection

and loggingΔ Pre-programmed alarms for


enunciators, relay outputs or communications event


Software

Δ EDMI EziView software available for meter programming andreading (Windows 7/Vista/XP/2000)



Prepayment

Δ Credit or debit operationΔ Energy or currency basedΔ STS token compatible (IEC

62055-31)Δ Multiple energy sourcesΔ Eight rates per sourceΔ External debt repayment x2Δ Minimum charges, standing

charges and emergency creditΔ Configurable warnings and

indicators

Security

Δ Multi-level security (Usernameand password includingencrypted log-in)



Communications

Δ Up to three independentlyworking communication ports


Δ RS-232 with modem powersupply (2G/3G supported)

Δ RS-485 multi-drop (2 or 4 wireRJ45 or 2 wire screw terminal) orsecond RS-232

Δ Option for passive RS-232Δ UDP/IP BPRS/PPP capableΔ Option for Zigbee Mesh RF, MV-

90 & PLC

Physical Dimensions

Δ Short cover: 180mm (H) x 131mm (W) x 65mm (D)

Δ Long cover: 210mm (H) x131mm (W) x 65mm (D)

Δ Weight: approx. 0.75 kg (0.95 kg with modem)



Tel: +44 (0)191 233 6322


225.0

134.0

213.5

51.7

71.2

Mk10AAdvanced Three PhaseElectronic Revenue MeterAtlas Series — Class 1 and Class 2

CT/WC CONNECTED

AMIAMI

READYLARGE DATA

STORAGELARGE

DISPLAYMEASURE

EVERYTHINGUPGRADABLE




Mk10AAdvanced Three PhaseElectronic Revenue MeterAtlas Series — Class 1 and Class 2

240

166 74

152

128 159

Measurement





Δ Nominal voltage: 220V – 240VΔ Operating range: 180V – 290VΔ Burden: <10VA/phase @ Vn

(Two Phase)Δ Frequency range: 45Hz – 65Hz

Current

Δ CT Range: 1/6A, 5/20AΔ CT Limit: 20 times Imax for

0.5 secondsΔ WC range: 5/100A, 10/100AΔ WC limit: 30 times Imax for

0.5 cycles, 7000A for three cyclesΔ Burden: <0.5VA/phase


Δ Three element four quadrantΔ Import/Export Wh, varh and VAhΔ Per quadrant Wh, varh and VAhΔ Absolute Wh, varh and VAhΔ Phase A,B,C and total

Other Measured and DisplayedValues

Δ Power: W, var, VA, VRMS, IRMS

Δ Power factor, frequency, phasorangles


Δ Total Harmonic Distortion (THD)Δ Unbalance (sequence

components)Δ Waveform download

SAG/SWELL

Δ Five cycle resolutionΔ Records time/date/phase/




Δ Up to four I/O total in threeisolated groups (maximum tworelay outputs)

Δ Options include: passive/activeinputs, S0/BOSFET/relay outputs

Δ Passive input voltage: 5V, 12V,48V, 110V, 240V

Δ Active input voltage: 12VΔ BOSFET Output: 240V, 100mA

maximumΔ S0 output: 27V, 27mA maximumΔ Relay output: 240V, 2AΔ Two LED indicators, independent

of I/OΔ Programmable output pulse

width: 1ms to 100ms

Environmental

Δ Operating range: -25˚C to 60˚CΔ Limit range: -40˚C to 70˚CΔ Storage range: -40˚C to 80˚CΔ Relative humidity: Up to


Δ Ingress protection: IP54, UL50 (3R)

Δ Salt spray resistant (IEC 60068-2-11)

Load Survey/Profile

Δ AMI ReadyΔ 2.1 megabytes of non-volatile

memoryΔ Over 7200 days (20 years)

storage (two channels, 30-minute intervals)

Δ Up to 32 channelsΔ Intervals programmable from

one to 60 minutesΔ Two independent surveysΔ Energy, instantaneous readings,

pulsing inputs as channelsources

Δ Ability to storeaverage/minimum/maximumvalues for interval duration

Physical Dimensions

Δ Standard version: approx.240mm (H) x 166mm (W) x74mm (D)

Δ Weight: approx. 2 kg for WC,approx. 1.8 kg for CT

Time Clock And Calendar


Δ Backup time of 10 years withoutpower (lithium battery)

Δ Supports Daylight Saving TimeΔ Supports Gregorian or

Persian calendars

Large LCD Display


any meter parameterΔ Definable enunciatorsΔ Display available without mains

power

Time of Use



Δ Daily, weekly, monthly, yearly and special

Δ Up to 200 programmable specialdays

Δ Up to 61 previous billing periodsplus billing totals



Security

Δ Multi-level security (usernameand password includingencrypted log-in)




Δ Provision for sealing withconventional wire or plastic seals

Δ Bypassing current and reversecurrent

Δ Advanced tamper detection andlogging

Δ Pre-programmed alarms formeter self-check

Δ Alarms trigger LEDs,enunciators, relay outputs orcommunications event


Communications

Δ Three independently workingcommunication ports




Δ RS-485 multi-drop (two or fourwire RJ45 or two wire Screwterminal) or second RS-232

Δ UDP/IP/PPP/GPRS capableΔ Compatible with ZigBee SEP 1.x.

Battery Options

Δ Internal batteryΔ Replaceable external battery

Software

Δ EDMI EziView software availablefor meter programming andreading (WindowsVista/XP/2000)

Δ EDMI MultiDrive softwareavailable for large scale AMI andAMR Solutions (Windows Vista/XP/2000)




Tel: +44 (0)191 233 6322


Mk10DAdvanced Three PhaseElectronic Meter withDisconnect and Reconnect FeatureAtlas Series — Class 1 and Class 2

DISCONNECT RELAY

LARGE DATA STORAGE

LARGE DISPLAY

MEASUREEVERYTHING

UPGRADABLE

AMIAMI

READY




Mk10DAdvanced Three PhaseElectronic Meter withDisconnect and Reconnect FeatureAtlas Series — Class 1 and Class 2

292.5

17595

170

158.5

Measurement




Δ Three phase four wire with 120Adisconnect switch


Δ Nominal voltage: 220V – 240VΔ Operating range: 176V – 276VΔ Withstand: 0 - 290VΔ Burden: <10VA/phase @ Vn

(Three Phase)Δ Frequency range: 45Hz – 65Hz

Current

Δ WC range: 10/100AΔ Overcurrent: 30 times Imax for

0.5 cyclesΔ Burden: <0.5VA/phaseΔ Disconnect Relay: 120AΔ Disconnect Rating: IEC62055-31

UC3@Imax, 264.5 VAC


Δ Three element four quadrantΔ Import/Export Wh, varh and VAhΔ Per quadrant Wh, varh and VAhΔ Absolute Wh, varh and VAhΔ Phase A,B,C and total


Δ Power: W, var, VA, VRMS, IRMS

Δ Power factor, frequency, phasorangles


Δ Total Harmonic Distortion (THD)Δ Unbalance (sequence

components)Δ Waveform download

SAG/SWELL





Δ Standard top row I/O√ Up to four I/O total,

independent with 4kV isolation√ Options include: passive/active

inputs, S0/BOSFET/relayoutputs

√ Passive input voltage: 5V, 12V,48V, 110V, 240V

√ Active input voltage: 12V√ BOSFET output: 240V, 2A√ S0 Output: 27V, 27mA

maximum√ Relay output: 240V, 2A

Δ Programmable output pulsewidth: 1ms to 100ms

Environmental

Δ Operating range: -25˚C to 60˚CΔ Limit range: -40˚C to 70˚CΔ Storage range: -40˚C to 80˚CΔ Relative humidity: Up to


Δ Ingress protection: IP54, UL50 (3R)

Δ Salt spray resistant (IEC 60068-2-11)

Load Survey/Profile








Physical Dimensions

Δ Standard version: approx.292.5mm (H) x 175mm (W) x95mm (D)

Δ Weight: approx. 2.5 kg

Time Clock And Calendar



Δ Supports Daylight Saving TimeΔ Supports Gregorian or

Persian calendars

Large LCD Display


any meter parameterΔ Definable enunciatorsΔ Display available even without

mains power

Time of Use



Δ Daily, weekly, monthly, yearly and special

Δ Up to 200 programmable specialdays

Δ Up to 61 billing periods plusbilling totals



Security






Δ Bypassing current and reversecurrent

Δ Advanced tamper detection andlogging

Δ Pre-programmed alarms formeter self-check

Δ Alarms trigger LEDs,enunciators, relay outputs orcommunications event


Communications





Δ RS-485 multi-drop (two or fourwire RJ45 or two wire Screwterminal)

Δ UDP/IP/PPP/GPRS capableΔ Compatible with ZigBee SEP 1.x.

Software

Δ EDMI EziView software availablefor meter programming andreading (WindowsVista/XP/2000)

Δ EDMI MultiDrive softwareavailable for large scale AMI andAMR Solutions (Windows Vista/XP/2000)




Tel: +44 (0)191 233 6322


Mk10EAdvanced Three PhaseElectronic Revenue MeterAtlas Series — Class 0.5S and Class 1

ACCURATE

AMIAMI

READYLARGE DATA

STORAGELARGE

DISPLAYTAMPER PROOF

UPGRADABLE




Mk10EAdvanced Three PhaseElectronic Revenue MeterAtlas Series — Class 0.5S and Class 1

175.0

262.44

95.0

Measurement

Δ Class 0.5S and Class 1 (MID Class C and Class B)

Δ Compliance with IEC 62052-11,62053-21, 62053-22, 62053-23

Δ Compliance with AS 62052.11,62053.21, 62053.22, 62053.23

Δ Compliance with EN 50470-1,50470-3

Δ Three phase three wire, threephase four wire


Δ Nominal voltage: 57.7V – 240V L-NΔ Operating limit: 52V – 290V L-NΔ Burden: <10VA/phase @ Vn

(three phase) (IEC 52053-61compliant)

Δ Frequency range: 45Hz – 65HzΔ Option for auxiliary supply and

UPS

Current

Δ CT range: 1/4A, 1/10A, 5/20AΔ CT meter: 20 times Imax for 0.5

secondsΔ WC range: 5/100A, 10/100A

(Class 1 or 2)Δ WC meter: 30 times Imax for 0.5

cyclesΔ Burden: <0.5VA/phase


Δ Three element four quadrantΔ Import/export Wh, varh and VAhΔ Per Quadrant Wh, varh and VAhΔ Absolute Wh, varh and VAhΔ Phase A, B, C and total


Δ Power: W, var, VAΔ True RMS voltage/current (three

phase)Δ Power factor, frequency, phasor

angles


Δ Total Harmonic Distortion (THD)Δ Sequence componentsΔ Waveform display

SAG/SWELL





Δ Standard top row I/O:√ Up to four I/O total,

independent common ground,4kv isolation

√ Options include: passive/activeinputs, S0/BOSFET/relayoutputs

√ Passive input voltage: 5V, 12V,48V, 110V, 240V

√ Active input voltage: 12V√ BOSFET output: 240V, 100mA

maximum√ S0 output: 27V, 27mA

maximum√ Relay output: 240V, 5A/2A

Δ Extended bottom row I/O:(Optional)√ As per standard I/O

Δ Output pulse width: 1ms to 100ms

Environmental

Δ Operating range: -25˚C to 60˚CΔ Limit range: -40˚C to 70˚CΔ Storage range: -40˚C to 80˚CΔ Relative humidity: up to 95%

non-condensing for 30 daysΔ Ingress protection: IP54Δ Salt spray resistant

(IEC 60068-2-11)

Load Survey/Profile








Physical Dimensions

Δ Standard version: approx.262mm (H) x 175mm (W) x95mm (D)

Δ Weight: approx. 2.0 kg


Δ Accuracy (internal) within 15seconds per month at 23˚C


Δ Mains synchronised or internalcrystal timing (selectable)

Δ Supports Daylight Saving TimeΔ Supports Gregorian or Persian

calendars

Time of Use

Δ Up to eight rates plus unified rateΔ Up to 32 separate import and

export registersΔ Daily, weekly, monthly, yearly and

specialΔ Up to 200 programmable special

daysΔ Up to 61 previous billing periods

plus billing totalsΔ Block or rolling maximum demandΔ Energy, pulsing inputsΔ Time of maximum demand

Large LCD Display


any meter parameterΔ Definable enunciatorsΔ Display available without mains

power

Battery Options

Δ Internal batteryΔ Replaceable external batteryΔ Option for additional supercap

Security






Δ Bypassing and reverse currentΔ Advanced tamper detection and

loggingΔ Pre-programmed alarms for


enunciators, relay outputs orcommunications event

Δ Alarms are stored in event logsΔ Option for magnetic immunity

Communications





Δ RS-485 Multi-Drop (four or twowire, RJ45 or screw terminal)

Δ Option for second RS-232 PortΔ UDP/IP GPRS/PPP capableΔ Option for ZigBee SEP 1.x.

Software

Δ EDMI EziView software availablefor meter programming andreading (Windows7/Vista/XP/2000)


Δ Supported by many popularthird-party multi-vendor AMRsystems.



Tel: +44 (0)191 233 6322


G6000Smart Ultrasonic Gas MeterClass 1.5

AMIAMI

READYDISCONNECT

VALVE

IP67INGRESS

PROTECTIONSMARTREADY

TAMPER PROOF

UPGRADABLE



The G6000 is a compact and precise smart gas meter based onproven ultrasonic measurement technology. The meter is bothrobust and flexible. The meter offers an extended temperaturerange from -25°C to 55°C and is IP67 certified.

The unit comes complete with an integrated valve which, alongwith advanced software/firmware features, allows the unit to beremotely configured.

G6000Smart Ultrasonic Gas MeterClass 1.5

234

158

131

79.49

22

Measurement and Certification

Δ Ultrasonic gas meter compliantto EN14236:2007 (MID) andR137-142:2012 (OIML)

Δ Smart Meter Certified to Ex ic IIB T4 Gc and Ex ib IIA T1 Gb(ATEX Zone 1 and 2)

Δ Measurement accuracy: 0.03 to 0.06m3 <+/- 3%0.6 to 6m3 <1.5%

Δ Measurement class 1.5Δ Temperature compensation

Gas Supply

Δ Natural Gas SG 0.64m3 typicalΔ Meter capacity: 6m/h at <200Pa

pressure loss (including valve)Δ H and L gas

Environmental

Δ Operating range: -25˚C to 55˚CΔ Storage range: -30˚C to 70˚CΔ Relative humidity: 95%Δ Ingress Protection: IP67Δ Corrosion: 1000h salt

spray compliant

Disconnect Valve

Δ DC-powered stepping motorΔ <0.25dm/h leak rateΔ Oil-less constructionΔ Local/remote operation

Battery

Δ Main Cell: D Type Lithium (15years service life – replaceable)

Δ BackUp: Third AA Lithium(internal)


Δ Accuracy: <+/- 5 sec/monthΔ Backup time 30 days without

main batteryΔ Supports Daylight Saving Time

for 15 years

Connections and PhysicalDimensions

Δ Connections: 1”BS 746couplings 6” centres

Δ Other centres also availableΔ 158mm (H) x 234mm (W) x

79.49mm (D)

LCD Display

Δ Large 16 x 2-character displayΔ Display digit size: 5.3 x 3.3mmΔ Multiple screens of any meter

parameterΔ Customisable and supports

multiple languageΔ Backlight standard

Load Survey/Profile

Δ AMI readyΔ Up to 2.0 Megabytes of non-

volatile memoryΔ 13 months of half hourly data

(also accessible on the LCD) Δ 48, 30 minute intervalsΔ Volume as channel sourceΔ Configurable Gas Day

Tamper Detect and Alarms

Δ Metrological seals to gas meterΔ Communications and battery

cover tamper evident sealsΔ Meter tamper detection alarmΔ Pre-programmed alarm logged

in event logΔ Alarms programmable to display

LCD status and communicationsevent

Software

Δ Supported by Interactive BackOffice (IBO) for meter datacollection and management

Δ Supported by Clariti browser-based energy data visualisationand reporting tool

Δ Supported by the Clariti iPhoneapp

Security

Δ Configurable user name andpassword login

Δ TRNG ANSI X9.31

Communications

Δ Optical Port compliant to EN62056-21

Δ WAN: GSM GPRS or SMSΔ Other custom options availableΔ Programmable Network

Settings:– Wake up schedule– Retry schedule– Network retry and logging– Diagnostics and monitoring

Materials

Δ Metal enclosure: powder-coatedzinc-plated steel/polycarbonate/nylon

Δ Smart index: polycarbonateΔ Ultrasonic unit: Polybutylene

terephthlateflow path, sensorand PCB

Processor

Δ Low powerΔ Extendable memory optionΔ Hardware cryptographyΔ Dual core Cortex M4Δ Back up software images for

high reliability



Tel: +44 (0)191 233 6322


W

t

)

2

r

TRADITIONAL AUTOMATIC METER READING

SOFTWARE

TRADITIONAL METER

CONFIGURATION TOOL

NETWORK MANAGEMENT

SYSTEMS

MULTIDRIVE

MultiDriveComplete Head EndSoftware for Smart Meter/AMI Deployments

Why choose MultiDrive?

Reliable and robust data retrieval andmanagement for up to 500,000 meters

Fast and easy to use commissioning system.Reduces installation time and guaranteesquality meter installation andcommunications link

Unlocks all the functionality of the feature richEDMI Atlas Series smart meters

Large scale meter management withdedicated fleet management features aroundconfiguration change and firmware upgrades

Reliable end to end communications solution



EDMI’s MultiDrive is a reliable andscalable Head End Software systemwhich allows back office utility systemsaccess to the AMI functionality providedby the EDMI range of Atlas Series digitalsmart meters.

Traditional Automatic Meter Reading Software

Δ Enables communication with a range of differentmeter vendor products

Δ Allows data retrieval for billing purposesΔ Do not support configuration change operations or

AMI functions

Traditional Meter Configuration Tool

Δ Allows users to perform configuration changesΔ Diagnostic analysis on individual meter devicesΔ Allows users to perform firmware upgradesΔ Allows users to access smart meter/AMI

functionality

Network Management Systems

Δ Manages the communications network to ensurethat back end systems can communicate reliablywith meters

MultiDrive

Δ Single product providing a combination of thefunctionality listed above

Δ Integrated and automated approachΔ MultiDrive provides utilities with the ability to unlock

the power of the EDMI smart meter productsΔ Easy to use access to all functions

MultiDriveComplete Head EndSoftware for Smart Meter/AMI Deployments

Network Management

Management of the communication connections Δ Support for multiple meter protocolsΔ Management of the connections to meters

across multiple bearersΔ Retrieval of signal strength informationΔ Bi-directional communicationsΔ Automatic linking of metering devices to correct

communication address or pathwayΔ Simplifies the deployment process via automatic

commissioning

Fleet Management

Management of the configuration, operation andgeneral maintenance of a fleet of metersΔ Management of meter setup/configuration

including reading and writing configuration to themeters

Δ Management of meter firmware includingupgrading or downgrading firmware in themeters

Δ Retrieval, storage and management of eventsreceived from smart meters

Measured Data Management

Retrieval and short term storage of measured dataΔ Retrieval of time of use data. The system

supports multi-register billing requirements,daily, monthly and three monthly billing cyclesand snapshot and interval values

Δ Retrieval of interval data including energyconsumption data and water and gas data

Δ Retrieval of power quality event data includingSag/Swell, Total Harmonic Distortion, Unbalance,over current exceedance

Δ Retrieval of minimum, maximum and averagevoltage, current and other electrical quantities

Non-Measurement Functionality

The control of other smart meter functions Δ Control of the connect/disconnect functionalityΔ Control of the load control functionality used in

demand side response, load shedding and loadlimiting business processes

Δ Send messages to In Home Displays via HANtechnologies

Scheduling

Δ Robust scheduling engine to trigger functions viatimed schedules, on an adhoc basis or based onevents received from meters

Δ Supports server or meter initiated connections

B2B Interface

Δ Includes file/database export and applicationprogramming interface to supportcommunicating with utility back office systems

Architecture/Performance

MultiDrive is based on traditional Client ServerarchitectureΔ Supports multiple communications servers to

allow scalabilityΔ Thick and thin clients for supporting multiple

concurrent usersΔ Ability to export data to other systems via file/DBΔ API’s to allow full control of functionality from back

office systemsΔ Can be tailored to match operational constraintsΔ Can be deployed to either Oracle or MS SQLΔ MultiDrive is a Wintel based systemΔ Designed to operate in a utility environment with

24/7 up timeΔ Supports virtual machine, clustering and other HA

technology so it can be integrated with the latestDR and business continuity planning

Δ Designed to resume upon restoration ofcommunications or other infrastructure failures

Δ Tested for reading up to 500,000 devices usingtypical GPRS communications on a daily basis

B2B INTERFACE

TOU

MEASURED DATA MANAGEMENT NON MEASUREMENT FUNCTIONALITY

METER SETUP FIRMWARE METER EVENTS

FLEET MANAGEMENT

PROTOCOLS CONNECTION MANAGEMENT COMMISSIONING

NETWORK MANAGEMENT

INTERVAL DATA PQ DATA/EVENTS DISCO/RECO LOAD CONTROL INFO DISPLAY

SCH

EDU

LIN

G

MultiDrive Functionality

MULTIDRIVE SERVER

DATABASE

APIs PROCESSMODULE

PROCESSMODULE

FILE/DBEXPORTS APIs ADD-ONS

COMSERVER

COMSERVER

MDCLIENT

} {}

{}

{}

{}

}



Tel: +44 (0)191 233 6322


EDMI Europe LtdThe Grainger SuiteDobson HouseRegent CentreNewcastle upon TyneNE3 3PFUnited Kingdom

Tel:+44 (0)191 233 6322

Email:[email protected] [email protected]

www.edmi-meters.co.uk

Documents

EDMI Smart Metering Solutions