Upload
others
View
12
Download
0
Embed Size (px)
Citation preview
1
CURRICULUM VITAE
Associate Professor Dr. Rizal Bin Zahari
Department of Aerospace Engineering,
Faculty of Engineering,
Universiti Putra Malaysia,
43400 UPM Serdang, Selangor
Telephone (office): +603-8946 4426
Telephone(Mobile):+613-2491962
Fax: +603-8656 7125
E-mail: [email protected], [email protected]
Education
DOCTOR OF PHILOSOPHY (PhD) in Composite Structures
Dept of Computational Mechanics, School of Engineering, Cranfield University, Bedfordshire,
United KingdomThesis Title: Progressive Damage Analysis of Composite Layered plates and Shells
using Finite Strip Methods. Year obtained: 2005
MSc. in Aerospace Vehicle Design (Structural Design Option),
College of Aeronautics, Cranfield University, Bedfordshire, United Kingdom. Thesis Title: Methods
to Measure the Behaviour of Sheet Metal Joints. Year obtained : 2001
BEng. in Engineering (Mechanical) with Honours,
Dept of Mechanical Engineering, University of Malaya, Kuala Lumpur, Malaysia.
Year obtained: 199
Research Interest
Finite Element Method for structural/stress analysis.
Finite Strip methods for composite plates and shells.
Progressive damage analysis of thin-walled composite laminated structures.
Buckling and post-buckling of composite structures.
Structural crashworthiness and ballistic impact analysis of composite structures.
2
Work Experiences Date Designation Remarks
NOV 2012-
Current
JAN 2008-
NOV 2012
Associate Professor,
University Putra Malaysia
(UPM), Serdang,
Selangor,MALAYSIA
Senior Lecturer (Assistant
Professor)
University Putra Malaysia
(UPM), Serdang,
Selangor,MALAYSIA
Designated, as an Associate Professor in the
Aerospace Department, Faculty of
Engineering, UPM. Teaching and
undergoing research work are the priority
areas besides doing the administrative,
networking, consultation and student project
supervision.
Designated, as a Senior Lecturer in the
Aerospace Department, Faculty of
Engineering, UPM. Teaching and
undergoing research work are the priority
areas besides doing the administrative,
consultation and student project supervision.
JULY 2005-
JAN 2008
Lecturer
University Putra Malaysia
(UPM), Serdang,
Selangor,MALAYSIA
Designated, as a Lecturer in the Aerospace
Department, Faculty of Engineering,
UPM. Teaching and undergoing research
work are the priority areas besides doing the
administrative, consultation and student
project supervision.
Sept 1999 -
Feb 2000 Engineer
NDK Quartz Sdn. Bhd.
shahAlam,
Selangor,MALAYSIA.
Appointed as a process engineer.
Responsible for process improvements in the
manufacturing of crystal quartzs.
Nov 1995 -
June 1996
Draughtsman
Air-ConditioningSystems
Design, Sunway,
PetalingJaya,
Selangor,MALAYSIA.
Responsible for manual and computer
draftings for aircondition systems as well as
air-cond duct design and sizing.
3
Professional Experience/ Position
1. Head , Structures and materials unit, Dept of Aerospace Engineering, UPM.
(January 2006 – 2010)
2. Materials laboratory Coordinator, Dept of Aerospace Engineering, UPM.
(August 2005 – 2011)
2. Member, employer representative for workers safety and health committee, Dept of
Aerospace Engineering UPM. (September 2005 – 2007)
3. Postgraduate Coordinator, Dept of Aerospace Engineering, UPM (August 2007-
2012).
4. Programme Coordinator/manager for Master of Innovation and Engineering
Design (master by taught course) Dept of Aerospace Engineering, UPM (2009-2012).
7. Committe member for programme development: Master of Innovation and
Engineering Design (by course) Dept of Aerospace Engineering (2007-present).-to
coordinate and involved in the programme restructuring.
8. Director/Head, Aerospace Manufacturing Research Centere (AMRC), UPM-
involved in coordinating and conducting research (academic and industrial) activities
related to aerospace engineering. (2012-2013)
Teaching Experiences UNIVERSITY PUTRA MALAYSIA
Graduate level
Course name Year
EAS 4301-Engineering Materials and Characteristics 2006- 2011
EAS 5703-Computer Aided Design 2010-2011
EAS 5403- Finite element Analysis 2007-CURRENT
Undergraduate Level
Course name Year
EAS 4401 Finite element Analysis 2007-CURRENT
4
EAS 3414-Aircraft Structures I 2005-2009
EAS 3412-Aerospace Materials & Processes 2005-2006
EAS3405-Aircraft Structures II 2005- CURRENT
KAA 3516-Structures and Materials Laborotary. 2005-2006
KAA 3314-Vibration and Control Laborotary 2005-2006
UNDERGRADUATE PART-TIME TEACHING (Other Local University)
Course name Year
Strength of Materials (Malaysian Insitute of Aviation Tech 2010
Dengkel, MALAYSIA)
Mechanics of Materials 2
(NATIONAL UNIVERSITY OF DEFENSE MALAYSIA) 2011
Aircraft Structures I&II 2010-2011 (NATIONAL UNIVERSITY OF DEFENSE MALAYSIA)
Postgraduate Supervision
PhD Supervision (Main supervision)
Student Name Status
1. Siavash Talebi Taher: Numerical and Experimental (2006-2009)
Analysis of a Composite Fuselage Energy Absorption Device. GRADUATED
2. Zainuddin bin A.Rashid: Post-buckling and damage analysis (July 2009-2012)
of SMA composites (GRADUATED)
3. Parnia Zakikhani: Mechanical and Physical characterizations of (Feb 2013-present)
bamboo fibre reinforced plastics. (Waiting for VIVA)
4. Shahan: Numerical & Experimental investigation of the (Feb 2015-present)
Fatigue behavior of Titanum stiffened panels (On-going)
5. Elias Randjbaran- Post-buckling behaviour hybrid Composite panels
after ballistic impact. (Feb 2014-present)
(On-going)
5
PhD (Co-supervision)
Student Name Status
1. Saeed Rahmanian: Systhesis of carbon nanotubes. (July 2012-2015)
GRADUATED
2. Omar Zarouq: Residual stress relaxation (Jan 2007-2011))
GRADUATED
3. Ali Shahrjedi: Functionally Graded Material (June 2008-2011)
for aerospace applications. GRADUATED
MSc by Research (Main supervision)
Student Name Status
1. Sulaiman Kamarulazizi: Progressive failure analysis of (July 2009-2012)
hybrid composite stiffened panels. (GRADUATED)
2. Abdul HafiezYusoff:Experimental derivation of the (July 2009-July 2012)
stiffness matrix of a thin-walled structure. (GRADUATED)
3. Elias Randjbaran- Compression after ballistic impact beheviour (Sep 2011-Sep 2013)
Of hybrid Composite panels GRADUATED
4. Ehsan Rasoliyazdi- Design and optimization of a vehicle side door (July 2011-Dec 2013)
beam subjested to Impact GRADUATED
5. Arash Zaighami – Buckling of composite laminated stiffened panels (Sep 2011-2013)
Subjected to combined shear and compression GRADUATED
6. Ali Farhaninejad- Multi-objective optimization of square beam subject (July 2011-Dec 2013)
to side impact for improvement of crashworthiness design GRADUATED
7. Lim Keng Teek - Experimental Assessment of the Collapse (July 2012-Nov 2014)
Behaviour of Hybrid Composite Square tube Subjected to GRADUATED
oblique loadings.
Student Name Status
MSc (Co-supervision)
1. Ng SeetWai: Finite element analysis of Corrugated (June 2007-June 2009)
6
Composite laminated cylindrical shell subjected to axial GRADUATED
compressive load.
2. Ng Wei Sim Finite Element Analysis On Cohesive Element (Nov 2009-2011)
For Composite Fuselage Model. GRADUATED
5. Hj Noorfaizal Bin Yidris: Crashworthiness Analysis of a (June 2005-Feb 2007)
Composite Laminated UAV Fuselage. (GRADUATED)
Masters Supervision(by taught course)
Student Name Status
1. Akhbar Othman-Crush analysis of tapered composite tubes subjected 2007-2008
To oblique loading. GRADUATED
2. Alex – Optimal buckling design of Zodiac fuselage 2009-2010
Structures. GRADUATED
3. Ahmad Faris-Analysis of lorry chasis using finite element method 2010-2011 GRADUATED
4. Parnia Zakikhani – Oblique impact analysis of hemispherical structure 2010-2011
using finite element analysis. GRADUATED
5. HalehAllamehHaery- Fatigue analysis of notched hybrid composite laminated 2010-2011
plates. GRADUATED
Research Fundings ( National Grant)
1. 2015- present (Project leader)
Title: Development of the New Spline-type Finite Strip Method based on Higher Order Plate
Theory for Composite Structures.
Fundamental research grant (UPM) (5823721)
RM 121,000 -(ON-GOING)
2. 2014-present (Group Project leader)
Main Title: Aerospace Composite Structures Reliability through Smart Materials Applications.
Subproject (Leader): Investigation on the Thermal fatigue of natural fiber reinforced composites with
smart materials for aerospace structure applications. GP-IPB –UPM (9415400)
7
RM 416,000 -(ON-GOING)
3. 2012- 2014(Project leader)
Title: Dynamic crushing behavior of tapered hybrid composite tubes subjected to oblique
loadings
RUGS- UPM Initiative 2 (9345400)
RM 50,000- COMPLETED
4. 2009-2012(Project leader)
Title: Experimental and Mathematical Derivation of the stiffness matrix of a thin-walled joint. Fundamental research grant (UPM) (5523721)
RM49,300-COMPLETED
5. 2007-2009(Project leader)
Title: Post-buckling analysis of composite laminated fuselage structures. Sciencefund, Malaysia (5450059)
RM 150,000-COMPLETED
6. 2005-2006 (Project leader)
Title: Progressive damage analysis of composite plates Initial Research Grant, UPM.
RM 10,000-COMPLETED
7. 2008-2010 (Member)
Title: A Robust Structural Health Monitoring (SHM) system for aircraft parts and structures
using Smart Material.
Sciencefund, MOSTI. Project no. 03-01-04-SF0807
RM 272,500-COMPLETED
8. 2008-2009(Member)
Title: Model Based Structural Health Monitoring (SHM) for Ageing Aircraft and Real
Engineering Structural Components using Finite Element Analysis and Optimisation Technique RUGS 51197 (UPM)
RM 44,000 –COMPLETED
Publication
JOURNALS
1. Zahari, R. & El-zafrany, A.(2009) Progressive Failure Analysis of Composite Laminated Stiffened
Plates using the Finite Strip Method. Composite Structures 87: 63-70.(ISI)-IMPACT FACTOR
2. Siavash T. Taher, R. Zahari, F.Mustapha, S.Basri, A.A. Oshkour, (2009) “On the Crush Behaviour
of an Ultra Light Multi-cell Foam-filled Composite Structures under Axial Compression”, Journal of
Reinforced Plastics and composites 29:391-408.(ISI)-IMPACT FACTOR
8
3. Siavash T. Taher, R.Zahari, S. Ataollahi, F. Mustapha, S. Basri, (2009) “A double-cell foam-filled
composite block for efficient energy absorption under axial compression”, Composite Structures
89:399-407.(ISI)-IMPACT FACTOR
4. Omar Suliman Zaroog, Aidy Ali, B BSahari and Rizal Zahari (2009)” Relaxation of compressive
residual stress. Part 1: Relaxation of stage I” ZAROOG et al: RELAXATION” Journal of Scientific
& Industrial Research 68: 1035-1037.(ISI)-IMPACT FACTOR
5. A.Shahrjerdi, R. Zahari, F. Mustapha (2009) Second Order Shear Deformation Theory to Analyze
Stress analysis for Solar Functionally Graded Plates. Journal of Mechanics based design and structure
(Accepted in Press) .(ISI)-IMPACT FACTOR
6. A.Shahjedi, M.Bayat, F.Mustapha, S.M.Sapuan and R.Zahari(2009) Free Vibration Analysis of
Functionally Graded Quadrangle Plates Using Second Order Shear Deformation Theory, Australian
Journal of Basic and Applied Sciences, 4(5):893-905 (SCOPUS)
7. Dayang Laila Majid, Rizal Zahari, Faizal Mustapha (2009) Vibration analysis of an aluminum
aircraft instrument panel board: Ground and in-flight test. International Review of Aerospace
Engineering (IREASE) 2(6):315-320 (SCOPUS)
8. A.Sharjerdi,M.Bayat,F.Mustapha,S.M.Sapuan,R.Zahari (2010) Stress analysis of a Functionally
Graded Quadrangle Plate using Second Order Shear deformation Theory. International Review of
Mechanical Engineering (IREME) 4(1):92-105. (SCOPUS)
9. Hakim S. Sultan Aljibori, W.P. Chong, T.M.I. Mahlia, W.T. Chong, Prasetyo Edi, Haidar Al-qrimli,
Irfan Anjum, R.Zahari (2010) Load-displacement behaviour of glass/epoxy with circular cut-outs
subjected to compressive load. Materials and Design 31(1):466-474. (ISI)-IMPACT FACTOR
10. N. Yidris, R. Zahari, A.S. Mokhtar, F. Mustapha, M.T. Hameed Sultan, A.S.M. Rafie (2009) Crush
Simulation of C-Glass/Epoxy Unmanned Aerial Vehicle Fuselage Section. International Journal of
Materials and Mechanical engineering. (SCOPUS)
11. A. Shahrjerdi, F. Mustapha, S.M. Sapuan, M. Bayat, D.L.A. Abdul Majid and R. Zahari, Thermal
Free Vibration Analysis of Temperature-Dependent Functionally Graded Plates Using Second Order
Shear Deformation Key Engineering Materials, 2011 Composite Science and Technology Vol. 471-
472 pp:133-140. Published. (SCOPUS)
12. A. Shahrjerdi, F. Mustapha, S.M. Sapuan, M. Bayat, D.L.A. Abdul Majid and R. Zahari, Optimal
Sintering Procedure to Fabrication of Functionally Graded Hydroxyapatite-Titanium. Key
Engineering Materials, 2011 Composite Science and Technology Vol. 471-472 pp:140-144.
Published,.(SCOPUS)
13. Z.A. Rasid, A. Ayob, R. Zahari, F. Mustapha, D.L. Majid and R. Varatharajoo, Buckling and Post-
Buckling Improvements of Laminated Composite Plates Using Finite Element Method, Key
Engineering Materials, 2011 Composite Science and Technology Vol. 471-472 pp:530-535.
Published,.(SCOPUS)
9
14. M.Y. Haris, D. Laila, E.S. Zainudin, F. Mustapha, R. Zahari and Z. Halim, Preliminary Review of
Biocomposites Materials for Aircraft Radome Application, Key Engineering Materials, 2011
Composite Science and Technology, Vol. 471-472,pp:563-567. Published, (SCOPUS)
15. N.W. Sim, F. Mustapha, R. Varatharajoo, R. Zahari and D.L. Majid, Parametric Study on Cohesive
Element for Composite Fuselage Model, Key Engineering Materials, 2011 Composite Science and
Technology, Vol. 471-472,pp:1085-1090. Published, (SCOPUS)
16. Varatharajoo, R., Mustapha, F.,Majid, D.L.A.A, Zahari, R.,Kahle,R., Critical speeds for
carbon/epoxy composite rotors in spacecraft energy storage applications, Key Engineering
Materials, 2011 Composite Science and Technology, Vol. 471-472,pp:37-42. Published, (SCOPUS)
17. Zaroog,O.S., Ali,A., Sahari,B.B,Zahari,R., Micro-hardness and Residual stress relaxation of 2024
T351 aluminium alloy, Key Engineering Materials, 2011 Composite Science and Technology, Vol.
462-463,pp:343-348. Published, (SCOPUS)
18. Zainudin A.Rasid & Rizal Zahari,(2011) The Postbuckling Improvement of the Shape Memory
Alloy Composite Plates through the Active Strain energy Tuning using finite element method, IEEE
Symposium on Business, Engineering and Industrial Applications (ISBEIA), Langkawi, Malaysia
:564-569. Published. (SCOPUS)
19. Zainudin A. Rasid, Rizal Zahari, A.Ayob, D.L. Majid, A.S.M. Rafie (2011) Thermal Post-buckling
Improvements of Laminated Composite Plates using the Active Strain energy Tuning Approach.
Advanced Materials Research 311-313: 2235-2238. (SCOPUS)
20. Shahrjerdi A., Mustapha, F., Bayat, M.,Sapuan, S.M., Zahari, R., Shahzamanian, M.M.(2009)
Natural Frequency of F.G. Rectangular plate by Shear Deformation theory. Conference on Advanced
Materials and Nanotechnology, CAMAN, Kuala Lumpur 17:1. (SCOPUS)
21. Zaroog, O.S., Sahari, B.B., Zahari,R.(2011) Modeling of Residual Stress Relaxation of Fatigue in
2024-T351 aluminium alloy. International Journal of Fatigue 33(2): 279-285. (ISI)-IMPACT
FACTOR
22. Omar Suliman Zaroog, Aidy Ali, B B Sahari and Rizal Zahari (2009) Modelling of Residual Stress
Relaxation: A ReviewPertanika J. Sci. & Technol. 17 (2): 211 – 218.(SCOPUS)
23. A.A Ramadhan, A.R. Abu Talib, A.S Mohd Rafie, R. Zahari, High Velocity Impact Response of
Kevlar-29/Epoxy and 6061-T6 Aluminum Laminated Panels, Materials and Design, 43: 307-
321.(ISI)-IMPACT FACTOR
24. A.A Ramadhan, A.R. Abu Talib, A.S Mohd Rafie, R. Zahari, Influence of Cut-Out Hole on Multi-
Layer Kevlar-29/Epoxy Composite Laminated Plates, Materials and Design, JMAD-D-11-01968
(Accepted, 2012) (ISI)-IMPACT FACTOR
25. A.A. Ramadhan, A.R. Abu Talib, A. S. Mohd Rafie, R. Zahari, The Influence of impact on
Composite Armour System Kevlar-29/polyester-Al2O3. IOP Conference Series: Materials Science
and Engineering (Accepted, 2012) (SCOPUS).
10
26. Haleh Allameh Haery , Rizal Zahari, Wahyu Kuntjoro, Yakub Md Taib (2012) Tensile strength of
notched woven fabric hybrid glass, carbon/epoxy composite laminates.Journal of Industrial Textiles
DOI: 10.1177/1528083712456055. (ISI)-IMPACT FACTOR.
27. Haleh Allameh Haery, Rizal Zahari,Hong Sung Kim, Ehsan Amini (2013),Tensile strength of
notched carbon/glass/epoxy hybrid composite laminates before and after fatigue loading,Journal of
Industrial Textiles. DOI: 10.1177/1528083713487757. (ISI)-IMPACT FACTOR.
28. Randjbaran, E., Zahari R., Majid, D.L., Jalil N.A.A., Vaghei R., Ahmadi R. (2013). The Effects of
Stacking Sequence Layers of Six Layers Composite Materials in Ballistic Energy Absorption,
International Journal of Material Science Innovations, 1 (6): 293-305.(SCOPUS)
29. Elias Randjbaran, Rizal Zahari, Dayang Laila Majid, Nawal Aswan Abdul Jalil, RaminVaghei and
RaminAhmadi (2013). The Effects of Stacking Sequence Layers of Hybrid Composite Materialsin
Energy Absorption under the High Velocity Ballistic Impact Conditions:An Experimental
Investigation. Journal of Material Science and Engineering 2 (4): 1-8. (SCOPUS)
30. Zainudin A. Rasid, Rizal Zahari,AmranAyob (2013), The post-buckling behavior of the composite
plates with embedded shape memory alloy subjected to combined loading using finite element
method.International Review of Mechanical Engineering 7(6):1121-1127.(SCOPUS)
31. Zahari R., Mustapha F,Majid, D.L.A., Shakrine A., Sultan T.H (2012). Geometric non-linear
analysis of composite laminated plates using higher order finite strip element. Applied Mechanics
and Materials 226: 165-171.(SCOPUS)
32. S Rahmanian, AR Suraya, R Zahari, ES Zainudin(2013). Synthesis of vertically aligned carbon
nanotubes on carbon fibres. Applied Surface Engineering 271(4): 424-428.ISI-IMPACT FACTOR
33. EhsanRasooliyazdi,Rizal.Zahari,Ali.Ghadianlou,Ali.Farhaninejad,Barkawi.Bin.Sahari,Faieza.Abd
ul.Aziz,Hamed.Jamali.(2013) Crashworthiness design of vehicle side door beam based onelliptical
geometry modification using Multi-objective optimization.International Review of Mechanical
Engineering (I.RE.M.E.) 8(1).(SCOPUS)
34. Djojodihardjo, H. , Jamali, H., Shokrani, A., Mustapha, F., Zahari, R., Wiriadidjaja, S. (2012)
Computational simulation for static and dynamic load of rectangular plate in elastic region for
analysis of impact resilient structure. Applied Mechanics And Materials. 225:150-157 .(SCOPUS)
35. Ramadhan, A.A. , Abu Talib, A.R. , Mohd Rafie, A.S. , Zahari, R. (2012) The behaviour of fibre-
metal laminates under high velocity impact loading with different stacking sequences of Al alloy.
Applied Mechanics And Materials. 225:213-218.(SCOPUS)
36. Z.A. Rasid, R.Zahari,A.ayob, D.L. Majid, A.S.M. Rafie (2011) Thermal Post-buckling of Shape
memory alloy Composite Plates under Non-uniform Temperature Distribution. International Journal
of Mechanical and Materials Engineering 2:1.
37. A.A. Ramadhan, A.R. Abu Talib, A. S. Mohd Rafie, R. Zahari, Analytical Study Of Energy
Absorption On Composite Kevlar-129/Polyester Under High Velocity Impact, International Journal
of Automotive and Mechanical Engineering, (Accepted 2012).
11
38. A.A Ramadhan, A.R. Abu Talib, A.S Mohd Rafie, R. Zahari, High Velocity Impact Damage in
Kevlar29/Epoxy-AL2O3, (2012) Journal of Advanced Science and Engineering Research, 2(2): 138-
154 (EBSCO Index).
39. A.A Ramadhan, A.R. Abu Talib, A.S Mohd Rafie, R. Zahari (2012),, Experimental and Numerical
Simulation of Energy Absorption on Composite Kevlar29/Polyester Under High Velocity Impact,
Journal of Advanced Science and Engineering Research, 2: 56-67 (EBSCO Index).
40. Zahari, R.& El-Zafrany, A. (2006) Progressive damage analysis of composite layered plates using a
mesh reduction method. International Journal of Engineering and Technology 3: 21-36.
41. Zahari, R., Hannan, A., Mustapha, F., Varatharajoo, R., Mohd Rafie, A.S.Sapuan,S.M.(2008)
Prediction of the Progressive Failure of Glass/Epoxy Laminated Plates under Compression. Journal
Mekanikal UTM.
42. Samira Mohamady, R. K. Raja Ahmad, Allahyar Montazeri, Rizal Zahari, Nawal Aswan Abdul Jalil
(2009). Modeling and Eigenfrequency Analysis of Sound-Structure Interaction in a Rectangular
Enclosure with Finite Element Method” Journal of Advances in Acoustics and vibration, Paper ID:
371297.
43. Omar Suliman Zaroog, Aidy Ali, B BSahari and Rizal Zahari (2009) Relaxation of Residual Stress
Part 2: Relaxation of Stage 2. American J. of Engineering and Applied Sciences 2 (4): 759-763.
44. Randjbaran, E., Zahari R., Majid, D.L., Jalil N.A.A., Vaghei R., Ahmadi R. (2013). An Experimental
Investigation Of The Effects Of Stacking Sequence On Hybrid Composite Materials Response To
Open-Hole Compression Strength., Matrix Academic International Journal of Engineering and
Technology, 1 (2):1-6.
45. Randjbaran, E., Zahari R., Majid, D.L., Jalil N.A.A., Vaghei R., Ahmadi R. (2013). The Effects of
Stacking Sequence Layers of Hybrid Composite Materials in Energy Absorption under the High
Velocity Ballistic Impact Conditions: An Experimental Investigation Matrix Academic International
Journal of Engineering and Technology, 1 (2):30-37.
46. Abdul Hafiez bin Yusoff, Rizal bin Zahari and Faizal bin Mustapha(2012) Empirical Stiffness
Matrix Derivation for an Elastic Substructure. Jurnal Mekanikal (35): 1-12.
47. Parnia Zakikhani, Rizal Zahari, Hamed Jamali (2013) Finite Element Simulation of Energy
Absorption of Circular Tube. International Review of Aerospace Engineering 6 (1) : 64-68.
48. Sulaiman Kamarulazizi, Rizal Zahari, Dayang Laila Abang Abdul Majid.(2012) Tensile behaviour
of unbalanced woven c-glass/epoxy composite laminated plates with and without circular cut-outs.
Jurnal Mekanikal 34:57-65.
49. Ali Farhaninejad, Rizal Zahari, Ehsan Rasooliyazdi (2012). Multi-criteria optimization of square
beam using linear weighted average model. World Academy of Science, Engineering and Technology
6(8) : 2184-2187.
12
50. Ali Farhaninejad, Rizal Zahari, B.B. Sahari , Faieza Abdul Aziz , E. Rasooliyazdi (2012). Multi-
objective optimization of square beam subject to side impact for improvement of crashworthiness
design. Journal of American Science 8(8): 474-481.
51. Randjbaran, E., Zahari, R., Vaghei, R., (2014). Scanning Electron Microscopy Interpretation In
Carbon Nanotubes Composite Materials After Post buckling - Review Paper. MATRIX Academic
International Online Journal Of Engineering And Technology. ISSN: 2348 – 3326.
52. Randjbaran, E., Zahari, R., Vaghei, R., (2014). Computing simulation of post-buckling in
functionally graded materials- A review. Telekomnika Indonesian Journal of Electrical Engineering
12(2).
53. Lim Keng Teek Rizal Zahari, Sultan, M.T.H, Faizal Mustapha (2014). Experimental Assessment of
the Collapse Behaviour of Hybrid Composite Square tube Subjected to oblique loadings. The
International Journal of Engineering and Science. ISSN:2319-1813. (Accepted).
54. S. Rahmanian, A.R. Suraya, R. Zahari, M.A. Shazed, E.S. Zainudin (2014), Mechanical
characterization of epoxy composite with multiscale reinforcements: Carbon nanotubes and short
carbon fibers. Materials and Design 60: 34-40. (ISI)-IMPACT FACTOR
55. Parnia Zakikhani, R. Zahari, M.T.H. Sultan, D.L.Majid (2014), Extraction and preparation of
bamboo fibre-reinforced composites. Materials and Design 63:820-828. (ISI)-IMPACT FACTOR
56. Randjbaran, E., Zahari, R., Vaghei, R., & Karamizadeh, F. (2015), Review Paper on Comparison of
Numerical Techniques for Finding Approximate Solutions to Boundary Value Problems on Post-
Buckling in Functionally Graded Materials. Trends Journal of Sciences Research, 1(1), 1-6.
57. Randjbaran, E., Zahari, R., Abdul Jalil, N. A., & Abang Abdul Majid, D. L. (2014). Hybrid
composite laminates reinforced with Kevlar/carbon/glass woven fabrics for ballistic impact
testing. The Scientific World Journal, 2014.
58. Randjbaran, E., Zahari, R., Majid, D. L., Jalil, N. A. A., Vaghei, R., & Ahmadi, R. (2014).
Experimental Study of the Influence of Stacking Order of the Fibrous Layers on Laminated Hybrid
Composite Plates Subjected to Compression Loading. Journal of Science and Engineering, 4(1), 01-
08.
59. S Rahmanian, AR Suraya, RN Othman, R Zahari, ES Zainudin (2015). Growth of carbon nanotubes
on silica microparticles and their effects on mechanical properties of polypropylene nanocomposites.
Materials and Design, 69: 181-189. (ISI)-IMPACT FACTOR
60. Parnia Zakikhani, Rizal Zahari, Mohamed Thariq Hameed Sultan, Dayang Laila Abang Abdul
Majid (2016), Thermal Degradation of Four Bamboo Species. BioResources Journal, 11(1), 414-425.
(ISI)-IMPACT FACTOR
13
CONFERENCE PROCEEDINGS
1. Zahari, R. & El-Zafrany, A. (2006) Progressive damage analysis of composite layered plates using
a mesh reduction method, Proceedings, FEIIC, Seminar on Engineering and Technology, Putrajaya.
2. Zahari, R. & El-Zafrany, A. (2007) Progressive failure analysis of trapezoidal composite laminated
plates using the finite strip method, Proceedings, AEROTECH, Putrajaya.
3. Sultan, M.T.H., Basri, S., Zahari, R., Ajir, M.R., Yidris, N. &Rafie A.S.M (2007) Design and
development of Ballistic Impact Test facility, Proceedings, AEROTECH, Putrajaya.
4. Peng, C.W., Zahari, R., El-Zafrany, A., & Mustapha, F. (2007) Experimental Investigation of the
Damage Behavior of Woven-fabric Glass/epoxy Laminated Plates with circular cut-outs subjected to
Compressive Force, Proceedings, World Engineering Congress, Penang.
5. Majid, D.L., Basri, S., &Zahari, R. (2007) Aeroelastic tailoring of cantilevered woven glass/epoxy
laminates, Proceedings, World Engineering Congress, Penang.
6. Zuliana Ismail, Rizal Zahari, RenuganthVaratharajoo (2008). Attitude Control of Small Sattelites
with Reaction Wheels. 4th International Colloquium on Signal Precessing and its Applications, March
7-9, 2008, Kuala Lumpur, Malaysia.
7. Samira, R.Zahari, R. Kamil(2009) Simulation of vibro-acoustics ROVISP’09, Langkawi,Malaysia.
8. Yusri Dahdi, Faizal Mustapha,Rizal Zahari,Edi I. (2009).Novel Fabrication techniques for Tubular
and Frustro composites. Proccedings of Aerotech Nov 2008 KL, Malaysia.
9. Ali Shahrjerdi, F. Mustapha, M. Bayat, S.M. Sapuan, R. Zahari and M.M Shahzamanian (2009)
Natural Frequency of F.G. Rectangular Plate, International Advanced of Technology Congress
(ATCi),PWTC, Malaysia. November 3-5.
10. Ali Shahrjerdi, F. Mustapha, M. Bayat, S.M. Sapuan, R. Zahari and M.M Shahzamanian Natural
Frequency of F.G. Rectangular Plate, International Advanced of Technology Congress
(ATCi),PWTC, Malaysia. November 3-5, 2009
11. Ali Shahrjerdi, F. Mustapha, R. Zahari, M. Bayat, SH.Hosseini, A.Nezamabadi, and M.M
Shahzamanian. Displacement Magnitude Of A Functionally Graded Square Plate Using Shear
Deformation Theory, World Engineering Congress 2010.
12. SiavashT.Taher, R.Zahari, F.Mustapha , S. Ataollahi, S.Basri, and AA.Oshkour “On the crush
behavior of an Ultra Light Multi-Cell Foam-filled Composite Structures For Energy Absorption: Part-
I-Experimental, Composite Conference, SIRIM, 2008, Kuala Lumpur.
13. SiavashT.Taher, R.Zahari, F.Mustapha , S. Ataollahi, S.Basri, and AA.Oshkour “On the crush
behavior of an Ultra Light Multi-Cell Foam-filled Composite Structures For Energy Absorption: Part-
II-Numerical Simulation, Composite Conference, SIRIM, 2008, Kuala Lumpur.
14
14. Zahari R., Mustapha F,Majid, D.L.A., Shakrine A., Sultan T.H (2012). Geometric non-linear
analysis of composite laminated plates using higher order finite strip element. AEROTECH IV
conference proceedings, Kuala Lumpur.
15. Parnia Zakikhani, Rizal Zahari, Mohammad Thariq Hameed Sultan. Bamboo natural fire reinforced
plastics. Proceedings of ICAME Nov 2013, KL, Malaysia.
16. Rizal Zahari, Siti Rozana Yusof, Effect of Air Gaps and Thickness on the Energy Absorptions of
Stainless Steel Plates Subjected to Ballistic Impact FEIIC-International Conference on Engineering
Education and Research 2015, Madinah, Kingdom of Saudi Arabia, 19-21 December 2015.
Consultation/Professional Services
Nov 2015
Dec 2014
April 2013
July 2013
Dec 2011
Sept 2009
Conducted a 1-day short course on “Finite Element Analysis for Composite
laminated Structures” for engineers from Sudan Aerospace Research Centre
(ARC). Organized by Malaysian Society of Structural Health Monitoring
(MSSHM).
Conducted a 2-day course on “Introduction to Finite Element Method” UPM,
organized by Focus Advanced Technologies Sdn. Bhd, Malaysia.
Conducted a short course (5-day) on “Aircraft Failure Analysis”. ADMAL
COLLEGE, Salak Tinggi, Malaysia.
Conducted a short course (5-day) on “Aircraft Vibration Analysis Part 2”.
ADMAL COLLEGE, Salak Tinggi, Malaysia.
Conducted a short course (5-day) on professional software training. Title:
“Application of ABAQUS on the damage analysis of composite & metal plates
using a user subroutine (FORTRAN) ” SIRIM BERHAD, Bukit Jalil, Malaysia.
Consultation job: Design and Analysis of an Accelerated and Controlled
Composting Pilot Plant, A Composter Unit. Eco Builders Snd Bhd, Malaysia.
July 2009 Consultation job: Assessing Resonance Frequency for a Stiffener to Strenghten
The Gyro Rack in Cargo Compartment In Aircraft, Eurocopter Malaysia.
Apr 2009 Consultation job: Bird Impact Test And Fatigue Test on F5 Canopy,Malaysian
Air Force.
Oct 2008 Consultation job: Evaluating Stress Distribution on a Spherical Vessel, Eco
Builders Snd Bhd Malaysia.
Sept 2008 Consultation job: In-flight vibration testing on a MARITIME helicopter for a
Spectro-link assembly panel, Eurocopter Malaysia.
15
Jun 2008 Consultation job: Assessing Resonance Frequency for a Flat Plate Panel
Mounting System on a MARITIME helicopter using Modal Testing Technique,
Eurocopter Malaysia.
Dec 2007 Consultation job: Finite Element Analysis for Bus Structure. Scomi Sdh Bhd,
Malaysia.
Dec 2007 Consultation job: Material Testings For Street Lantern Lamp. PERMINTEX
SDN BHD, Malaysia.
16
Professional Recogniton
1. Year: 2006
Title: National Symposium: Aerospace Technologies (AEROTECH II), Putrajaya, Malaysia.
Responsibilities: Member
2. Year: 2007
Title: Brain Gain Malaysia Program, Akademi Sains Malaysia
Responsibilities: Member
3. Year: 2009
Title: National Symposium: Aerospace Technologies (AEROTECH III),
Kuala Lumpur, Malaysia
Responsibilities: Event Manager
4. Year 2008
Title: World Engineering Congress Penang, Malaysia
Responsibilities: Member
5. Year 2011
Title: 8th International Conference on Composite Science and Technology
Kuala Lumpur,Malaysia
Responsibilities: Organizing Committee, Editorial panel and Panel poster judge.
6. Year 2012-current
Member of MQA Malaysia
Responsibilities: Panel evaluator/auditor
7. Year: 2012
Title: National Symposium: Aerospace Technologies (AEROTECH IV),
Kuala Lumpur, Malaysia.
Responsibilities: Member
8. Year: 2013
Self-accreditation for an academic program under the faculty of Human Ecology, UPM- Code
of Practice for Programme Audit (COPPA).
Responsibilities: Evaluator/Auditor
9. Year: 2014
Title: National Symposium: Aerospace Technologies (AEROTECH V),
Kuala Lumpur, Malaysia.
Responsibilities: Member
17
10. Year: 2015
Title: National Symposium: Aerospace Technologies (AEROTECH VI),
Kuala Lumpur, Malaysia.
Responsibilities: Co-Chairman of conference
11. Year: 2016
Appointment as a committee for UPM & SCINCEFUND (national level) research grant evaluator.
Scientific Journal and conference paper reviewer
Title Role Level Year
1. Composite Structures (Q1): Multi-level Experimental
And Numerical Analysis
Of composite Stiffener Debonding
Part 1: Non-specific specimen level
Journal
Reviewer
International (ISI) 2008
2. Composite Structures (Q1): Multi-level Experimental and
Numerical Analysis of Composite
Stiffener Debonding
Part 2: element level and panel level
Journal
Reviewer
International(ISI) 2008
3. Composite Structures (Q1): Progressive Damage Analysis of
Composite Bolted Joints with Liquid
Shim Layers using Constant and
Continuous Degradation Models
Journal
Reviewer
International(ISI) 2009
4. WEC 2010: Whole Body Vibration
(WBV) On Malaysian Armed
Forces (MAF) Vehicles
Journal
Reviewer
National 2010
18
5.
6.
Aerotech III: Delamination
Phenomena for Airframe
Composite Structure
Composites Part B (Q1)
Physically-based Finite element
Strength Prediction innotched
Woven Laminates under quasi-
static Loading
Journal
Reviewer
Journal
Reviewer
National
International(ISI)
2009
2011
7. ASMScience
Modelling and simulation of Artificial Journal National 2011
Hair Cell Sensor For underwater Reviewer
Application
8. Thin-Walled Structures (Q2) Journal International(ISI) 2015
Damage analysis for new laminated Reviewer
Woven Composites.
9. Steel and Composite Structures Journal International(ISI) 2016
Investigation of damage and residual Reviewer
bending strength of molded grating
composite panels after low-velocity
impacts.
Thesis Examiner
Master by research
PhD Master by course
Internal
examiner
24 (UPM) 14 (UPM) 28 (UPM)
External
examiner
1 (UNITEN),
2 (UPNM)
2 (UNITEN) 2 (UNITEN)
Chairman of the
examination
committee
5 (UPM) 4 (UPM) NA
19
Profesional membership/Afiliation
- Graduate Member, Board of Engineer Malaysia (BEM)
- Member of AIAA, United states of America
- Associate Researcher, Aerospace Manufacturing Research Centre (AMRC), UPM.