EIO-D-200svr1.infosystem.com.tw/admin/download_cn/images/file/... · 2018-09-23 · 9 Use Setup Tools to Configure the Settings 9 Use HTTP, IE/Netscape Browser for Setting ¾ Good

Infosystem®

Copyright © 2005Infosystem Technology Corporation, Ltd.No. 45, Lane 167, Dongnan St.Hsinchu, Taiwan 300, R.O.C.TEL: +886-3-562-7187FAX: +886-3-561-1435

Service E-mail: [email protected] page URL:http://www.infosystem.com.tw

Infosystem®

Copyright © 2005Infosystem Technology Corporation, Ltd.No. 45, Lane 167, Dongnan St.Hsinchu, Taiwan 300, R.O.C.TEL: +886-3-562-7187FAX: +886-3-561-1435

Service E-mail: [email protected] page URL:http://www.infosystem.com.tw

EEIIOO--DD--220000

User Manual

Version 1.0

Infosystem Technology Corporation, Ltd.

Ethernet Digital I/O

Infosystem®

EIO-D-200Infosystem®

EIO-D-200

Index 1. Index ．．．．．．．．．．．．．．．．．．．．．．．．．．．． 1. 2. Disclaimers ．．．．．．．．．．．．．．．．．．．．．．．．．． 3.

A. Warranty ．．．．．．．．．．．．．．．．．．．．．．．．． 4. B. Trademark ．．．．．．．．．．．．．．．．．．．．．．．． 4.

3. Product Information ．．．．．．．．．．．．．．．．．．．．．．． 5. A. Introduction ．．．．．．．．．．．．．．．．．．．．．．．． 5. B. Features ．．．．．．．．．．．．．．．．．．．．．．．．． 6.

4. Exterior ．．．．．．．．．．．．．．．．．．．．．．．．．．． 7. A. Overview ．．．．．．．．．．．．．．．．．．．．．．．．． 7. B. Front Panel ．．．．．．．．．．．．．．．．．．．．．．．． 8. C. Dimension ．．．．．．．．．．．．．．．．．．．．．．．． 8.

5. Specifications ．．．．．．．．．．．．．．．．．．．．．．．．． 9. A. Basic Specifications ．．．．．．．．．．．．．．．．．．．．． 9. B. Digital Input Specification ．．．．．．．．．．．．．．．．．．． 10. C. Digital Output Specification ．．．．．．．．．．．．．．．．．． 11. D. LED Indicator and Switch Description ．．．．．．．．．．．．．． 12. E. Wiring ．．．．．．．．．．．．．．．．．．．．．．．．． 14. F. ModBus Holding Register Definition ．．．．．．．．．．．．．．． 17.

6. Software Installation ．．．．．．．．．．．．．．．．．．．．．．． 19. A. Install ．．．．．．．．．．．．．．．．．．．．．．．．． 19.

- Step 1: Insert the CD and click the button ．．．．．．．．．．． 19. - Step 2: Click the Link of the Page ．．．．．．．．．．．．． 20. - Step 3: Press Next to Continue ．．．．．．．．．．．．．． 21. - Step 4: Decide the Application Directory ．．．．．．．．．．． 22. - Step 5: Create the Directory if not existent ．．．．．．．．．． 23. - Step 6: Create Program’s Shortcut ．．．．．．．．．．．．． 24. - Step 7: Decide if Desktop icon needed ．．．．．．．．．．．． 25. - Step 8: Press Install to start installation ．．．．．．．．．．． 26. - Step 9: Process Installations ．．．．．．．．．．．．．．． 27. - Step 10: Finish Installation ．．．．．．．．．．．．．．． 28.

1.

Infosystem®


EIO-D-200

B. Uninstall ．．．．．．．．．．．．．．．．．．．．．．．．． 29.

- Step 1: Execute Uninstall Program ．．．．．．．．．．．．． 20. - Step 2: Click “Yes” to process ．．．．．．．．．．．．．．． 30. - Step 3: Finished ．．．．．．．．．．．．．．．．．．．． 30.

7. Configuration．．．．．．．．．．．．．．．．．．．．．．．．．． 31. A. By Browser ．．．．．．．．．．．．．．．．．．．．．．．． 31.

- Step 1: Ready to login ．．．．．．．．．．．．．．．．． 31. - Step 2: Configure your parameters ．．．．．．．．．．．．． 32. - Step 3: Finish and reboot ．．．．．．．．．．．．．．．． 33.

B. By Setup Tools ．．．．．．．．．．．．．．．．．．．．．． 34. - Step 1: Searching the devices ．．．．．．．．．．．．．．． 34. - Step 2: Double click the selected item ．．．．．．．．．．．． 34. - Step 3: Configure and update your parameters ．．．．．．．．． 35.

C. By Direct Broadcast Commands ．．．．．．．．．．．．．．．． 36. - Command List A ．．．．．．．．．．．．．．．．．．．． 36. - Command List B ．．．．．．．．．．．．．．．．．．． 37. - Command List C ．．．．．．．．．．．．．．．．．．． 38.

8. Application Notes ．．．．．．．．．．．．．．．．．．．．．．．． 39. A. Description ．．．．．．．．．．．．．．．．．．．．．．． 39. B. Disable Firewall of Windows XP SP2 ．．．．．．．．．．．．．． 39.

- Step 1: Execute "Windows Firewall" ．．．．．．．．．．．．． 39. - Step 2: Close the Firewall ．．．．．．．．．．．．．．．． 40.

C. Make Program exception for Firewall ．．．．．．．．．．．．．．． 41. - Step 1: Choose "Exception" ．．．．．．．．．．．．．．． 41. - Step 2: Add on New Program ．．．．．．．．．．．．．．． 42. - Step 3: Allow "Accept Any Computer" ．．．．．．．．．．．． 43. - Step 3: Finished ．．．．．．．．．．．．．．．．．．．． 44.

2.

Infosystem®


EIO-D-200

Disclaimers The information in this manual has been carefully checked and is believed to be accurate. Infosystem Technology Corporation, Ltd. assumes no responsibility for any infringements of patents or other rights of third parties, which may result from its use. Infosystem assumes no responsibility for any inaccuracies that may be contained in this document. Infosystem makes no commitment to update or to keep current the information contained in this manual. Infosystem reserves the right to make improvements to this document and/or product at any time without notice. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form of or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Infosystem Technology Corporation, Ltd. Copyright © 2003 - 2005 Infosystem Technology Corporation, Ltd. All rights reserved. Printed in Taiwan.

3.

Infosystem®


EIO-D-200

Warranty

All products manufactured by Infosystem are warranted against defective materials for a period of one year from the date of delivery to the original purchaser.

Trademark The names used for identification only maybe registered trademark of their respective companies.

4.

Infosystem®


EIO-D-200

Product Information

A. Introduction

EIO is an I/O controller product with Ethernet on its data communication and makes data acquisition easier through ModBus/TCP protocol on an existing Ethernet network. For different conditions, EIO basically has been design into four models. EIO-R is Relay I/O Controller. EIO-A is Analog I/O. EIO-D is Digital I/O. And EIO-T is Thermo Coupler I/O Controller. By using these products, the controlling and monitoring of distributed control system can easily be accomplished. EIO-D-200 uses 8051’s family microprocessor for implementing Ethernet functions. It uses the state machine to handle TCP/IP stack with most but limited functions because of the limited resources. EIO-D-200 supports ARP, ICMP, TCP, UDP, IP, DHCP-Client and even HTTP protocols. You can use any browsers to set the parameters, or just use the commands in console mode. With no doubt, EIO-D-200 will bring you the best integration in your applications.

5. Infosystem®


EIO-D-200

Product Information

B. Features

Easy Configuration Setting Use Setup Tools to Configure the Settings Use HTTP, IE/Netscape Browser for Setting

Good Security Concerned Setup Login in Password Protect Access Password Protect

High Reliability Stable and Robust Working 24Hours per day

Support Necessary Network Protocols ARP, ICMP, TCP, UDP, IP, DHCP Client, HTTP

Support ModBus Protocol ModBus/TCP, ModBus/RTU, ModBus/ASCII Easy integration with HMI/SCADA or OPC Server

High Reliability Stable and Robust Working 24Hours per day

Isolation Photo Coupler Isolated Inputs Photo Coupler Isolated Outputs

Input / Output DC 24V Input x 12 DC 24V Output x 6

6.

Infosystem®


EIO-D-200

Exterior A. Overview

Serial PortDigital

Input

LED Indicator

Digital Output DC 24V Power Input

Dip Switch

Serial PortDigital

Input

LED Indicator

Digital Output DC 24V Power Input

Dip Switch

7.

Infosystem®


EIO-D-200

Exterior B. Front Panel

a. Connector 1 (CONN1)

b. Ethernet 10BaseT RJ45 Connector

c. LED Indication

d. Connector 2 (CONN2)

C. Dimension

(UNIT: mm)4 xψ3.0

50.0102.0

80.094.0

9.0

33.0

(UNIT: mm)4 xψ3.0

50.0102.0

80.094.0

9.0

33.0

8.

Infosystem®


EIO-D-200

Specifications

A. Basic Specifications

Entry Description Communication Interface Ethernet 10BaseT, RJ-45

Protocol ARP, ICMP, TCP, UDP, IP, DHCP Client, HTTP, Modbus/TCP Slave, Modbus/RTU, Modbus/ASCII

Reset Built-in reset key to restore the defaults Watch Dog Timer Built-in hardware auto reset function

Discrete I/O 12 points, DC 24V Input 6 points, DC 0.5A Output

Led Indication SYS x1 (Red), LINK x1 (Green) Power Requirement 24V DC Power consumption < 1W

Operation: 0ºC~+55º C (32ºF~+131ºF) Temperature

Storage: -20ºC~+70ºC (-4ºF~+158ºF) Humidity 15% to 95% (non-condensing)

Dimension 100mm x 68mm x 25mm Configuration Web Browser, Windows Utility via Ethernet

9. Infosystem®


EIO-D-200

Specifications

B. Digital Input Specifications

Entry Description Number of Input Points 12 points

Isolated Method Photo Coupler Rated Input Voltage 24V DC Rated Input Current 7 mA

Operation Voltage Range 21.6V DC ~ 26.4V DC Turn ON State 12V DC / 2 mA or higher Turn OFF State 4V DC / 1 mA or lower

Input Impedance Approx. 3.9 KΩ OFF ON 8 msec or less (24 VDC)

Response Time ON OFF 8 msec or less (24 VDC)

Common Terminal Arrangement 12 points / common Internal Current Consumption MAX. 100 mA (type, all points ON)

10.

Infosystem®


EIO-D-200

Specifications

C. Digital Output Specifications

Entry Description Number of Input Points 6 points

Isolated Method Photo Coupler Rated Load Voltage 24V DC

Operation Voltage Range 21.6V DC ~ 26.4V DC Type NPN / Sink

Max. Load Current 0.5 A/pt Leakage Current at OFF Circuit 0.1 mA or less Max. Voltage Drop at ON Circuit 1.5V or less

OFF ON 8 msec or less Response Time

ON OFF 8 msec or less Common Terminal Arrangement 6 points / common

Voltage 24V DC (21.6V DC ~ 26.4V DC) External Power Supply

Current 100 mA International Current Consumption 100 mA (type, all points on)

11. Infosystem®


EIO-D-200

Specifications

D. LED Indicator and Switch Description – Top View –

9 CONN1 1 RJ4510BaseT

1 CONN2 131 2

SW

TOP ViewSYS

LINK


1 CONN2 131 2

SW

TOP ViewSYS

LINK

12.

Infosystem®


EIO-D-200

Specifications

D. LED Indicator and Switch Description – Description – LED Indicator:

Switch Description:

SW1 SW2 OPERATION Mode OFF OFF Reserved, SW2 must be OFF ON OFF Reserved, SW2 must be OFF ON ON Reserved, SW2 must be OFF OFF ON Reserved, SW2 must be OFF

LED Description SYS The SYS LED blinks at a rate of 1.5Hz and indicating normal work. LINK If ON, the Ethernet connection is activated.

13.

Infosystem®


EIO-D-200

Specifications

E. Wiring Users may refer to the following diagram to connect the external wiring for the EIO-D-200 module. – Front Panel PIN Definition –

SYS

LINK

1

9

1

13

CONN1

CONN2

DI1

DI2

DI3

DI4

DI5

DI6

DI7

DI8

24G

DI9

DI10

DI11

DI12

DO1

DO2

DO3

DO4

DO5

DO6

24G

24G

24V


1 CONN2 131 2

SW

TOP ViewSYS

LINK

1

9

1

13

CONN1

CONN2

DI1

DI2

DI3

DI4

DI5

DI6

DI7

DI8

24G

DI9

DI10

DI11

DI12

DO1

DO2

DO3

DO4

DO5

DO6

24G

24G

24V


1 CONN2 131 2

SW

TOP View

14.

Infosystem®


EIO-D-200

Specifications

E. Wiring – Equivalent Input Circuit –

15. Infosystem®


EIO-D-200

Specifications

E. Wiring – Equivalent Output Circuit –

16.

Infosystem®


EIO-D-200

Specifications

F. ModBus Holding Register Definition The discrete I/O points of the EIO-D-200 can easily be controlled and monitored through Modbus protocol. The Modbus address mapping with discrete I/O is described as the followings. – Output Address – The 6-points digital output of EIO-D-200 is mapped with the Modbus holding register “40001”. The following table describes the exact bit-mapping for Modbus holding register “40001”.

Digital Output Of

EIO-D-200

EIO-D-200 Scan Data Address (ModBus Holding Register Address 40001)

DO-1 Bit 0 (40001:0) DO-2 Bit 1 (40001:1) DO-3 Bit 2 (40001:2) DO-4 Bit 3 (40001:3) DO-5 Bit 4 (40001:4) DO-6 Bit 5 (40001:5)

17.

Infosystem®


EIO-D-200

Specifications

F. ModBus Holding Register Definition – Input Address – The 12-points digital input of EIO-D-200 is mapped with the Modbus holding register “40002”. The following table describes the exact bit-mapping for Modbus holding register “40002”.

Digital Input Of

EIO-D-200

EIO-D-200 Scan Data Address (ModBus Holding Register Address 40002)

DI-1 Bit 0 (40002:0) DI-2 Bit 1 (40002:1) DI-3 Bit 2 (40002:2) DI-4 Bit 3 (40002:3) DI-5 Bit 4 (40002:4) DI-6 Bit 5 (40002:5) DI-7 Bit 6 (40002:6) DI-8 Bit 7 (40002:7) DI-9 Bit 8 (40002:8)

DI-10 Bit 9 (40002:9) DI-11 Bit 10 (40002:10) DI-12 Bit 11 (40002:11)

18.

Infosystem®


EIO-D-200

Software Installation

A. Installation Step 1: Insert the CD and click the button

The Software Installation CD that came with EIO-A-200 will automatically be run after inserting it into the CD-ROM drive. Click the “Ethernet converter Setup Utilities” button will bring the installation page out,

Figure1. Software Install CD Auto-Run Screen Shot

19. Infosystem®


EIO-D-200


A. Installation

Step 2: Click the Link of the Page

Click the Link of the Page to run the Ethernet Converter Setup Tools Installation Software.

Figure2. Ethernet Converter Setup Tools Page

20.

Infosystem®


EIO-D-200


A. Installation

Step 3: Press Next to Continue

Figure3. Installation Welcome Message

– 3. Connect to Configuration Mode –

21. Infosystem®


EIO-D-200


A. Installation

Step 4: Decide the Application Directory

Figure4. Decide the Application Directory

22.

Infosystem®


EIO-D-200


A. Installation

Step 5: Create the Directory if not existent

Figure5. Create Application Directory

23. Infosystem®


EIO-D-200


A. Installation

Step 6: Create Program’s Shortcut

Figure6. Shortcut Creation

24.

Infosystem®


EIO-D-200


A. Installation

Step 7: Decide if Desktop icon needed

Figure7. Desktop Icon Creation

25. Infosystem®


EIO-D-200


A. Installation

Step 8: Press Install to start installation

Figure8. Review the Installation Settings

26.

Infosystem®


EIO-D-200


A. Installation

Step 9: Process Installations

Figure9. Installing

27. Infosystem®


EIO-D-200


A. Installation

Step 10: Finish Installation

Figure10. Installation Finished

28.

Infosystem®


EIO-D-200


B. Uninstall Step 1: Execute Uninstall Program

Uninstall Program is located at the application directory named “Uninstall Ethernet Converter Setup”. Execution of it could let the Ethernet Converter Setup Tools clearly be removed.

Figure11. Decide the Application Directory

29. Infosystem®


EIO-D-200


B. Uninstall Step 2: Click “Yes” to process

Figure12. Process Uninstall

Step 3: Finished

Figure12. Process Uninstall

30.

Infosystem®


EIO-D-200

Configuration

A. By Browser

Step 1: Ready to login.

31. Infosystem®


EIO-D-200

Configuration

A. By Browser

Step 2: Configure your parameters.

32.

Infosystem®


EIO-D-200

Configuration

A. By Browser

Step 3: Finish and reboot.

33. Infosystem®


EIO-D-200

Configuration

B. By Setup Tools

Step 1: Searching the devices. Step 2: Double click the selected item.

34.

Infosystem®


EIO-D-200

Configuration

B. By Setup Tools Step 3:

Configure and update your parameters.

35. Infosystem®


EIO-D-200

Configuration

C. By Direct Broadcast Commands It needs broadcasting to handle all the configurations and it allows users to code their own application software.

– Command List A – User Level – – Command Description Notes

Purpose For Broadcast search

Syntax X <magic code>

Magic code 99.130.83.99

Return AX <MAC>/<IP>/<Device ID>

Send X 99.130.83.99

X or x

Example Back AX 0.128.200.255.251.242/192.168.1.1/1

Purpose Get all the parameters of the WM-110

Syntax G <MAC>/<IP>/<Setup Password>

Return All the parameters of the WM-110

Send G 0.128.200.255.251.242/192.168.1.1/123

CG for cancel

G or g

Example Back

AG<All Messages>

36.

Infosystem®


EIO-D-200

Configuration

C. By Direct Broadcast Commands User Level: For General Users Admin Level: For Factory Default Setting

– Command List B – User Level – Command Description Notes

Purpose Set the parameters of WM-110

Syntax S <MAC>/<IP>/<Password>/<Parameter>/<Value>

A for accept Return

C for cancel

Send S 0.128.200.255.251.242/192.168.1.1/123/IP/192.168.1.2

S

Example Back A or C

Purpose Reboot WM-110

Syntax R <MAC>/<IP>/<Setup Password> AR for accept Return CR for cancel Send R 0.128.200.255.251.242/192.168.1.1/123

R

Example Back AR or CR

37. Infosystem®


EIO-D-200

Configuration

C. By Direct Broadcast Commands User Level: For General Users Admin Level: For Factory Default Setting

– Command List C – Admin Level – Command Description Notes

Purpose Set MAC address of WM-110 then reboot automatically

Syntax M <Old MAC>/<New MAC>/<Factory Password>

AM for accept Return

CM for cancel

Send S 0.128.200.255.251.242/0.128.200.255.251.243/123

M

Example Back ‘A’ or ‘C’

Purpose Set IP for Factory settings

Syntax I <MAC>/<New IP>/<Factory Password> AI for accept Return CI for cancel Send I 0.128.200.255.251.242/192.168.1.1/123’

I

Example Back AR or CR

38.

Infosystem®


EIO-D-200

Application Notes A. Description:

Firewall will make the program off normal, so one might choose the following solutions to Firewall program, “Disable” or “Exception”.

B. Disable Firewall of Windows XP SP2. Step 1: Execute "Windows Firewall"

Execute “Windows Firewall” in Control Panel.

39. Infosystem®


EIO-D-200

Application Notes B. Disable Firewall of Windows XP SP2. Step 2: Close the Firewall

Choose “Close” to close firewall.

40.

Infosystem®


EIO-D-200

Application Notes C. Make Program exception for Firewall Step 1: Choose "Exception"

Choose “Exception” in Firewall Program. And add on new program of Setup Tools.

41. Infosystem®


EIO-D-200

Application Notes C. Make Program exception for Firewall Step 2: Add on New Program and Selection

Choose “Setup Tools” to make it as an exception.

42.

Infosystem®


EIO-D-200

Application Notes C. Make Program exception for Firewall Step 3: Allow "Accept Any Computer"

Allow “Accept Any Computer” to finish exception.

43. Infosystem®


EIO-D-200

Application Notes C. Make Program exception for Firewall Step 4: Finished

Finish Exception.

44.

Documents

EIO-D-200svr1.infosystem.com.tw/admin/download_cn/images/file/... · 2018-09-23 · 9 Use Setup Tools to Configure the Settings 9 Use HTTP, IE/Netscape Browser for Setting ¾ Good