EL5000 Hardware Introduction

Company

LOGO

ELID 2008 IDT

EL5xxx Hardware and System Configuration

Hardware and System Configuration

1. Hardware Overview1. Hardware Overview

2. EL5xxx series Controller2. EL5xxx series Controller

3. Reader Interface Unit (RIU)3. Reader Interface Unit (RIU)

4. Accessories 4. Accessories

5. System Configuration 5. System Configuration

Matrix V Hardware

Hardware Overview

EL5xxx Series Controller

MAIN CONTROLLER.MAIN CONTROLLER. EL5xxx

Multi-door controller Intel Chipset Built in LAN

THE FAMILYTHE FAMILY EL5000 – 8 Doors

Combination of Door Access System, Car Park, Time Clock, and Combo mix mode.

EL5002 2 doors controller



EL5000L 8 Lift controller up to 32 Floors/ Lift


** Proprietary encryption…

EL5000 Controller

LAN Port

E-BUS1

E-BUS2

Reset Button

I/O Expansion Port

A/C Power Socket

Temper Switch, AC fail, Battery low

LCD Display

EPROM (EVEN)

EPROM (ODD)

Keypad

Battery Shunt

EL5000 v 3.x.x

Cold Start Mode - EL5000V3 mode (A) or ET5000 mode (B)

EL5000V3 mode Card Database - from 33,000 to 38,165. Transaction Database - from 22,000 to 30,000 Mix mode – Door access with simple Time Clock feature.

ET5000 mode Card Database - 19,846. Time Clock Access Level (i.e, you must clock-in or out at

certain reader and at certain time) Card holder's database can now holds 16 character

name and will be displayed on the EK9i when badge card.

Reason code support – To leave the attendant reason. Timers – from 24 to 99 per door Timezones – from 10 to 99 per door Holiday – from 20 to 40 16 char door label support for EK9i The Mixed mode now support Reason Code

Selection (20 sets, each with 16 character long text) Enhanced baud rate speed: 9600 and 57600bps

EL5002 Controller

LAN PortE-BUS to EFD 80

Reset Button

I/O Expansion Port

D/C Power Socket


LCD Display

EPROM (EVEN)

EPROM (ODD)

Keypad

Battery Shunt

Door # 2* In & Out reader

* Push button

* Door Sensor

* EM Lock


* Push button

* Door Sensor

* EM Lock

EA 8

EA 8

EPROM (ER505)

EL5004 Controller

Multi-function, configurable for either Card access, Carpark control, Time clock or Mixed Mode

Enhanced anti-passback capabilities 40 holidays 99 timezones, with 99 timers, each with 4 time

intervals Escorting dual-card mode for high security door Special Card capability to arm and disarm sensors 2 MB on-board memory (Up to 33,000 cardholders

and 22,000 transactions) Status LEDs for DC Power, Database Health, CPU

heartbeat, Ethernet and RS485 communication Dedicated inputs for tamper, battery low and AC

power failure status Advanced Encryption Standard 128-bit secured

communication algorithm Local board is 2 doors + Connect to RIU for 2 doors. Enhanced baud rate speed: 9600 and 57600bps

EL5004 Controller

LAN Port

E-BUS to RIU for Door 3, and Door 4

Reset Button

I/O Expansion Port

D/C Power Socket


LCD Display

EPROM (EVEN)

EPROM (ODD)

Keypad

Battery Shunt


* Push button

* Door Sensor

* EM Lock


* Push button

* Door Sensor

* EM Lock

EA 8

EA 8

EPROM (ER505)

EL5500 Controller

EL5500 flexible mode 120,000 Card Users, 23,000 Transactions 33,000 Card Users, 160,000 Transactions 50,0000 Card Users, 80,000 Transactions

ET5500 card-db size is 61,000 3 E-bus - 2-wire RS-485 channels

E-Bus 1 and E-Bus 2 connect to RIU E-Bus 3 connect to EFD.

Enhanced baud rate speed: 9600 and 57600bps

EL5500 Controller

LAN Port

E-BUS1

E-BUS2

Reset Button

I/O Expansion Port

D/C Power SocketTemper Switch, AC fail, Battery low

LCD Display

EPROM (EVEN)

EPROM (ODD)

Keypad

Battery Shunt

E-BUS3

EL5030 Controller

5-door Networked Door Access - Serve as the cost-effective family member for the IP-based Matrix V Integrated Security System.

1 channel RS-485 communication bus. Connect up to 4 unit of ER62 RIU for 4 ENTRY and 4 EXIT card readers.

Store up to 4,000 cardholders and holds 10,000 transactions in case the communication is disrupted with the server host.

32-bit low-power and high-performance microprocessor IP addressable - Ethernet TCP/IP network, or ADSL

modem/router with Dynamic DNS support 12VDC /1A input power requirement with single CR2032 Lithium

battery cell for data-backup Multi-functions, configurable as either Standard card access,

Car-park control or Time-clock Mixed Mode Enhanced anti-passback capabilities (hard/soft/alarm) 40 holidays set, 10 timezones, with 24 timers, each with 2 time

intervals Status LEDs for DC Power, Database Health, CPU heartbeat,

Ethernet and RS485 communication Dedicated inputs for tamper, battery low and AC power failure

status

EL5030 Controller

In Reader Door1

EL5030

In Reader Door2

In Reader Door3

* Door 1Push ButtonEM Lock, Door Sensor



EL5030 Typical Configuration

LAN Port

E-BUS

D/C Power Socket

Reader Interface Unit

ER505 Reader Interface Unit


* Keypad

* Push button

* Door Sensor

* EM Lock

EA 8 EA 8


* Keypad

* Push button

* Door Sensor

* EM Lock


D/C Power Socket

Dip Switch

Reset Button

RS485 Socket

EPROM



* Keypad

* Push button

* Door Sensor

* EM Lock

EA 8


D/C Power Socket

Reset Button

RS485 Socket

EPROM

Dip Switch

ER 502 Reader Interface Unit

Single door R.I.U. 2 reader -1 In and 1 Out Onboard 7 segment LED for unit number display DIP switches for changing unit number. 7 input point - Panel tamper switch, door sensor, push button,

AC fail, battery low, sensor 1 and sensor 2. 4 relay output - EM lock or door latch, GP output 1, GP output

2 and buzzer. EK9S up to 50m length. EA8 I/O expansion board. Enhanced baud rate speed: 9600 and 57600bps Support 4x3 keypad Support door access and car park mode Wiegand input and output which support simultaneous

reading Reader format supports:

Wiegand 26-bit (HID, EM, Mifare) Free Wiegand (max. 40-bit)(HID, EM, Mifare) Barcode (2of5, 3of9)

ER 502 Reader Interface Unit

* Push button

* Door Sensor

* EM Lock

EA 8


A/C Power SocketReset Button

RS485 Socket

EPROM

EK9S Keypad

In reader

Out reader

* Sensor 1* Sensor 2

* GP output 1* GP Output 2

4x3 Keypad

Dip Switch

LED – Unit NumberBaud Rate Jumper

EK9i LCD Reader Interface Unit

2 models Blue LCD (2x16 line) Yellow LCD (Single line, No Backlit)

Single door R.I.U. 2 reader -1 in and 1 out LCD menu for setting- unit number, baud rate and etc. 6 input point - Panel tamper switch, door sensor, push button,

AC fail, battery low, sensor 1. 2 relay output - EM lock or door latch, GP output 1 or buzzer. Option connect to EL3Z relay board for better security Enhanced baud rate speed: 9600 and 57600bps Wiegand input and output which support simultaneous

reading Reader format supports:

Wiegand 26-bit (HID, EM, Mifare) Free Wiegand (max. 40-bit)(HID, EM, Mifare)

Support messaging, and door label Reader Beeper control Random tone keypad Support offline reader access mode (up to 10 cards) Power Saving Mode – Auto off when idle

EK9i LCD Reader Interface Unit

In Reader

Out Reader

Cold Start Button

Reset Button

RS485 Socket

GP Output

* EM Lock* Push Button* Door Sensor* Key Switch* Sensor / Tamper

D/C Power Socket

Battery LowAC Fail

EPROM

Temper Switch

Buzzer

Nuevo LCD Reader Interface Unit

LCD display – 16 x 2 Amber color Cap Sense Keypad – Button-less backlit keypad with dimming

effect High quality voice indicator – adjustable volume with random tone

when touch keypad USB connection for firmware upgrade and setting. Elegant curve design with mirror finish and scratch resistant Power Saving Mode – Auto off when idle Single door R.I.U Build-in Reader and connect to 1 out reader - support

simultaneous reading LCD menu for setting - unit number, baud rate and etc Enhanced baud rate speed: 9600 and 57600bps Support messaging, and door label Reader format supports:

Wiegand 26-bit (HID, EM, Mifare) Free Wiegand (max. 40-bit)(HID, EM, Mifare)

All inputs (tamper switch, door sensor, push button, sensor 1 and 2, AC fail and battery low) and all outputs (door latch and GP 1) are routed to an external I/O board

Support offline reader access mode (up to 10 cards) Option - Release door when host controller is offline (break down)

Nuevo LCD Reader Interface Unit

Nuevo LCD Keypad With build-In Reader

Nuevo Out Reader


16-bit low-power and high-performance microprocessor with 128KB Flash memory

2 reader ports configurable either as 1 door with ENTRY/EXIT readers or 2 door with ENTRY reader and EXIT PUSH BUTTON

RS-485 communication with 57600 baud or 9600 baud

Support Wiegand-26, Free Wiegand, HID, EM, MIFARE, ABA Magnetic Cards and Barcode Cards

4 sensor inputs 6 open-collector transistor outputs 12VDC / 0.5A power requirement


In Reader Out Reader

2-wire RS485 from EL5030

ER62

Connect to EL5030

EFD 80 Field devices

8 On Board Outputs

+

24 expansion Outputs

16 On Board Inputs

EA5168 Field devices

EA 5168 Overview

8 On Board Outputs

8 On Board Inputs

EA8 Field devices

6 On Board Outputs

2 On Board inputs

EL3Z Field devices

Outputs

* Door Sensor

* AC Fail

* Push Button

* Interlock

Accessories

EA584 star hub Connect the RS485 device into star

topology instead of the conventional daisy chain topology.

Can connect up to 4 Devices Connection usage - RIU and I / O

Field Devices Each connection distance is up to

1km 12VDC

EA584 Configuration

ES8A Relay Board

8 On Board Outputs

Connect to EFD

System Configuration

EL 5000

(64 input and 64 output)



EL 5500




EL 5002




EL 5004



EL 5030 – Option 1

In Reader Door1

EL5030

ER62

In Reader Door2

In Reader Door3

In Reader Door4 In Reader

Door5







EL 5030 – Option 2

*Door 1 In ReaderEL5030

ER62

* Door 1EM Lock, Door Sensor

*Door 1 Our Reader

*Door 2 In Reader

*Door 2 Our Reader


ER62*Door 5 In Reader

*Door 5 Our Reader


ER62*Door 3 In Reader

*Door 3 Our Reader


ER62

*Door 4 In Reader * Door 4EM Lock, Door Sensor

*Door 4 Our Reader

2 wire RS485

Q n A

Documents

EL5000 Hardware Introduction