Electric Barrel and Container Pumps...Electric and pneumatic Barrel and Container Pumps 250 W Universalmotor 230 V 50Hz 2 - 4 kg 500/700/1.000/1.200 mm Lab pump 22/30/40 l/min 4 m

Edition 11/2008

JESSBERGERFass - und

Behälterpumpen

JESSBERGERElectric

and pneumatic Barrel and

Container Pumps

250 W Universalmotor230 V 50 Hz

2 - 4 kg

500/700/1.000/1.200 mm

Lab pump

22/30/40 l/min

4 m

200 mPas

PP / SS 316Ti

25/28/32 PP 28/32 SS

seal less

Electric Barrel and Container Pumps

*All physical valuesgiven are maximumvalues. The capacityof the respectivepumps refers to waterat 18° C and free flow(without hose barb).

Seal lesspump tubes

1 · Barrel and Container Pumps

P u mp tube length

Type

Delivery rate*

Delivery head* Rotor/ Impeller

Pump tubes made of

Construction

Pump tube Ø

Motor

Max.Viscosity*

Weight

Examples of LiquidsH y d ro ch l o ric acid, soda lye, sulphuric acid, fo rmic acid,sal ammoniac, photo deve l o p e r, lime potash, fixingb a ths, acetic acid, phosphoric acid, fruit acids, nitro u sacid, hy d ro f l u o ric acid, bleaching solution, wa te r, lacticacid, boric acid, ch romic acid, soap solutions and a wideva ri ety of other liqu i d s .

Double isolated, catego-ry II, Splash-proofing,according to IP 24.On/off switch, Thermo-protection

Lab pump, lightweightand handy.Suitable for pumpinglow volumes of acid andalkaline liquids fromdrums and containerswith a narrow neck.Pump tube can also becombined with an airmotor or any otherJESSBERGER motor.

Barrel pumps are lightweight, handy and extremelypowerful devices suitable for transferring thin to lowviscous, neutral or corrosive liquids. Designed for por-table and static use the pumps are particularly suitablefor intermittent operation. The state-of-the-art and yetsimple technical design assures sound and reliableoperation. Because of our modular concept everymotor can be combined with every pump tube.

For flammable liquids and for use in explosive sur-roundings ex - proof drum pumps with necessaryaccessories can be supplied. Motor and pump tuberequire ATEX approval.

7 - 10 kg

JP-160

80 l/min

6 m /12 m

300 mPas

400 W Universalmotor230 V 50 Hz

Double isolated, catego-ry II, Splash-proofingaccording to IP 24. On/off switch, Overload protectionswitch

L i g h t weight barrel andc o n tainer pump. S u i table for pump i n gfluid, neutral and non-flammable liqu i d s .

Wi th electronic speedc o n t rol available as ano pt i o n .

7 - 10 kg

JP-180

150 l/min

8 m / 21 m

600 mPas

PP, PVDF, SS 316Ti, Aluminium

600 W Universalmotor230/115 V 50-60 Hz


Lightweight barrel andcontainer pump.Suitable for pumpingfluid acids and bases,neutral, aggressive andnon-flammable liquids.Wi th electronic speedc o n t rol available as ano pt i o n .

700 / 1.000/ 1.200 /1.500 mm or special lengths

seal less - SS 316Ti pump tube also with mechanical seal (Ø 41 mm)

41 mm, also available: smaller PP and SS 316Ti pump tubes

All pump tubes will besupplied with a hoseconnection, a sta i n l e s ssteel hose clamp 1” andup to 1.200 mm alsow i th a wall hanger at noex t ra cost s .

TechnicalDatas

The delive ry ra te can bere g u l a ted in accord a n c ew i th yo u r n e e d s. An elec-t ronic power re g u l a tor isavailable for this purp o s eas an option (speed con-t ro l ) .

For different applications depending on the liquids, pump tubes are available inPP, PVDF, SS 316Ti and Aluminium. The pump tubes are connected to the motor via a hand-wheel and can be fitted and removed with a few rotations fastand easy without the need of any special tools.Pump tubes with axial-flow rotor will be used for high delivery rate and lowhead.Pump tubes with radial-flow impeller are the right choice for low delivery ratewith high head.

PP PVDF

JP-180JP-125JP-128JP-132

JP-160

SS 316Ti ALU


Mixingpump tube

EC Type ExaminationCertificate Number: DEMKOO3 ATEX 135563X

PP, PVDF, SS 316Ti, Aluminium

7 - 10 kg

700 / 1.000/ 1.200 /1.500 mm or special lengths

JP-200

150 l/min

8 m / 21 m

600 mPas

seal less - SS 316Ti pump tube also with mechanical seal (Ø 41 mm)



Lightweight barrel andcontainer pump.Suitable for pumpingfluid acids and bases,neutral, aggressive andnon-flammable liquids.Wi th electronic speedc o n t rol available as ano pt i o n .

7 - 10 kg

JP-280

200 l/min

14 m /28 m

1.000 mPas

41 mm, also available: smaller PP and SS 316Ti pump tubes



Powerful barrel and con-tainer pump, solid con-struction, also for pum-ping lightly viscousmedia, acids and bases,neutral, aggressive andn o n - flammable liqu i d s .Wi th electronic speedc o n t rol available as ano pt i o n .

7 - 10 kg

JP-300

200 l/min

14 m / 28 m

1.000 mPas



Powe rful barrel and con-tainer pump, solid con-st ruction, also for pum-ping lightly viscousmedia, acids and bases,n e u t ral, aggre s s i ve andn o n - flammable liqu i d s .Wi th electronic speedc o n t rol available as ano pt i o n .

12 - 15 kg

JP-400

100 l/min

8 m / 20 m

600 mPas

550 W Ex230 V 50 Hz

EEx de IIA T6, Splash-proofing according toIP 54.On/off switchOverload protectionswitch

Ex-protected,high power barrel andcontainer pump, solidconstruction, also forpumping lightly viscousmedia, acids and bases,neutral, aggressive andflammable liquids.

12 - 15 kg

JP-500 SM

120 l/min

10 m / 22 m

600 mPas

0,37 kW or 0,55 kWthree-phase-motor

230/400 V 50 Hz

T h re e - p h a s e - m oto r3000 rpm with cable te rm i-nal box .H o s e - p roofing accord i n gto IP 5 5 .

B a rrel and conta i n e rp u mp, th re e - p h a s e - m oto rw i th planeta ry gear 1:4 fo rlonger operation times top u mp lightly viscousmedia, acids and bases,n e u t ral, aggre s s i ve andn o n - flammable liqu i d s .Can be combined witheve ry pump tube.

For pumping flammableliquids or to be used in explo-sion hazardous areas it is onlyallowed to use approved stain-less-steel pump tube.

Mixing pump tubewith double-function pumping and mixing.Seal less pump tubes made of PP with pump tubeØ 50 mm and pump tube lengths of 1.000 mm for200-Liter-drums and 1.200 mm for containers areavailable. SS mixing pump tube is certified con-firm to ATEX.

JP- 280JP- 200 JP- 300 JP- 400 Ex JP- 500 SM

For pumping flammableliquids or to be used in explo-sion hazardous areas it is onlyallowed to use approved stain-less-steel pump tubes.

Weight 3 - 5 kg 3 - 5 kg

700 / 1.000 / 1.200 / 1.500 mm or special lenghts

JP - AIR 1

90 l/min

10 m / 24 m

400 mPas

JP- AIR 2

120 l/min

10 m / 27 m

600 mPas

PP, PVDF, SS 316 Ti, Aluminium

seal less - SS 316Ti also available with mechanical seal

41 mm

4 - 6 kg

JP-AIR 3

120 l/min

10 m / 27 m

600 mPas

Pneumatic Barrel and Container Pump s

EC Type ExaminationCertificate Number IBEx U05 ATEX B007 X

EC Type ExaminationCertificate NumberIBEx U05 ATEX B007 X

300 Watt at max. 6 bar

operating pressure


operating pressure


operating pressure


*All physical values given are maximum values. The capacity of the respective pumps relates towater at 18° C and free flow (without hose barb).

For pump tubes, examples of liquids and electric drumand container pumps see page 1 and 2.

Technical Datas

J P-AIR 2c o mp ressed air moto rw i th sta rting button onthe handle. The moto rsta rts running and th ep u mp is tra n s fe rri n gl i quids when the button isp re s s e d .

JP-AIR 3compressed air motor,stainless steel housing,with plug valve at air inta-ke for compressed aircontrol. This regulatesthe motor speed andvaries the pumping capa-city.

Lightweight, handy bar-rel and container pumpsuitable for pumpingfluid and lightly viscousmedia.

Handy, powerful barreland container pumpsuitable for pumpingfluid and lightly viscousmedia.

JP - AIR 2 JP- AIR 3

Lightweight, handy bar-rel and container pumpsuitable for pumpingfluid media.

are lightweight, handy and extre-mely powerful devices suitablefor use with nearly all fluid andmedium viscous liquids. Theirstate-of-the-art and yet simpletechnical design assures soundand reliable operation. Becauseof our modular concept everymotor can be combined withevery pump tube.

Designed for portable and staticuse, the pumps are particularlysuitable for intermittent operati-on.Those pumps fitted with com-pressed air motors and stain-less steel pump tubes providea particulary high level ofsafety when pumping or fillinglightly flammable liquids ofvarious danger classes fromone container to another.

JP - AIR1

P u mp tube length

Type

Delivery rate*

Delivery head Rotor/ Impeller

Pump tubes made of

Construction

Pump tube Ø

Motor

Max.Viscosity*

JP-AIR 1 compressed air motorwith brass ball valve forcompressed air control.This regulates the motorspeed and varies thepumping capacity.

An ATEX version with600 W is also available.

E c c e n t ric Screw Pump s

Design, form and colour modifications reserved.

6 - 14 kg 15 - 30 kg

700 /1.000 /1.200 mm or special lengths up to 2.000 mm

JP-700 SR

20.000 mPas

JP-700 DR E

12 / 25 / 50 l /min*2

60 m (single stage) / 120 m (double stage)

100.000 mPas

SS 316Ti

Mechanical seal or gland

54 mm

15 - 25 kg

JP -700 DR A

0.37 - 2.2 kW 0.5 - 1.5 kW

100.000 mPas

f.e. 825 W

Stator: NBR, NBR light, Hypalon, Viton, EPDM, PTFE


Driven by universalmotor, JP-280 or com-pressed air motors JP-AIR 2 and JP-AIR 3. Pump tube with planeta-ry gear (15:1).

Universal, solidly built,handy and powerfulpump. For fluid to vis-cous liquids such as

paint, varnish, oil, soap,washing liquids, fruitjuice, jam, etc.

D ri ven by comp ressed airm oto rsJ P-A I R 4 (0.5 kW)

6 (1.0 kW)8 (1.5 kW).

Wi th pump hange r, f l exible or rigid coupling.

Driven by three-phasemotors with0.37/0.55/0.75 or 1.1 kWat 700 rpm or 900 rpm.With pump hanger,flexible or rigid coupling.

Powerful high viscositypump for permanent ope-ration. For pumpinghighly viscous to fluidsubstances such aslatex-based paint, glue,cream, paste, gel, cho-colate mass, honey, etc.

JP -700 SR JP -700 DR E JP -700 DR A

Versatile, solidly built andpowerful eccentric screwpump for fluid to highlyviscous media such as

sediment, pastes, soap,shampoo, honey, syrup,jam, ketchup, etc.

Nozzle PolypropyleneOrder-No.9017Housing and internal pieces in black polypropylene PP,valve seats and o- rings are in Viton (FPM), spring inTitanium.

Working pressure: max. 2 bar*Viscosiy: 750 mPas*Flow rate: max. 100 l/min.*L i quid te mp e ra t u re: max.50 ° C *Hose connection: 3/4˝ or 1˝Weight: 0,26 kg

Nozzle, brass nickel plated, Teflon seal, rotating jointOrder-No.9042Ideally suitable for filling andtransferring liquids alsoin the food and pharmaceuticalindustry.

Wo rking pre s s u re: max. 4 bar*Vi s c o s i t y: 750 mPa s *F l ow ra te: max. 80 l/m i n .*L i quid te mp e ra t u re: max. 80°C *We i g h t: 1,4 kgHose connection: 1” or 5/4”

Strainer of PolypropyleneOrder-No.9011Strainer of stainless steel1.4571 Order-No.9012Recommended when pumpingdirty or contaminated liquids withabrasive particles.

Order-No.9011 Order-No.9012

Barrel adaptors PP Ø41mm, Order-No.9001Ø32mm, Order-No.9080B a rrel adapto rs sta i n l e s sste e lØ41mm, Order-No.9002Ø32mm, Order-No.9081

Emission proof drum adapte rPP Order-No. 9 0 24, B rass Order-No.9025, SS 316 Ti Order-No.9 0 2 6The adapter prevents emission ofharmful gases and vapours out ofthe drum.

Bonding, ground setOrder-No.9 0 0 3

Stainless steel hose clampOrder-No.9 0 04

Safety clampOrder-No.9 0 0 5for attaching the pump to opencontainers.

Wall bracket Order-No.9 0 0 6This wall bracket is recommendedfor pump storage. Proper storagewill increase the life expectancy ofyour pump and motor.

Order-No.9042

Order-No.9017

Order-No.9001Order-No.9002Order-No.9080Order-No.9081

Order-No.9024Order-No.9025Order-No.9026

Order-No.9004

Order-No.9003

Order-No.9006Order-No.9005

Accessories

Order-No.9020Please ask for detailed

information!

Electronic flowmeterOrder-No.9 0 2 0Housing made of Polypropylene.Other materials: POM, PVDF or stainless steel. O ption: Volume p re - s et, impuls output for furt-her data pro c e s s i n g .

*All physical values given are maximum values. The capacity refers to water at 18° C and free flow.

Design, form and colour modifications reserved.

*2 Higher flow rates or also horizon-*2 tal versions or dosing pumps can *2 be offered on request.

JESSBERGER GmbHJaegerweg 5

D-8 5 5 21 Otto b ru n nTe l e fon: +49 ( 0)89 66 66 33 400

Fax: +49 ( 0)89 66 66 33 411e - mail: i n fo @ j e s s p u mp e n . d ei n te rn et: www. j e s s p u mp e n . d e

Please contact:

Further scope of supply

Mixers for drumsand containersJESSBERGER offers solutions for almost everymixing application for drums and containers.

Horizontal Centrifugal Pumps SERIE JP- 840executed in Polypropylene and PVDF

The following hoses can be supplied:Universal - and special hoses for chemical substances, PVC-hoses, PTFE-hoses, hoses for mineral oil and solvents,tissue- reinforced or electrically conductive. Please ask for details.

Vertical Centrifugal PumpsSERIE JP- 820executed in Polypropylene and PVDF

Electric and pneumatic drum andcontainer pumps JESSBERGER Pump technology withinternal and external cooled motorsin different flow capacity ranges.

Seal - less pump tubes in Polypropylene,P V D F, ALU and stainless steel. Tube length s700, 1.000, 1.200, 1.500 and 1.800 mm. Also in special lengths up to 3.000 mm. Please ask us.

protank 25mobil

Electric Diesel - and fuel oil pumpsare intended mainly for the refu-eling of agricultural machines, tractors, machines for constructionwork, truck, motorboats and allvehicles w i th diesel or light fuel( h a z a rd class A III) engines.

protank 50stationary

Seal -Less Magnetic Driven Pumps Available in various sizes, state -of - the -artconstruction, seal - less and environmentallyfriendly, suitable for a variety ofuses, low noise level, long life, easy tomaintain.

Please ask for detailed information about the individualproduct groups of the JESSBERGER delivery program.Please make a cross below the requested figure and e-mail or fax this page to us with your address.

Dosing pumps for viscous liquids for fluid, viscose, aggres-sive, neutral media with or withoutsolids or fibres part i c l e s .

Horizontal EccentricScrew Pumpsare suitable for liquids with low or high viscosity, whether neutral or aggressive, with or withoutsolids or fibres particles.

Electronic Flowmeter Nr.9020Housing made of PP. Volume pre-s et ,S i g n al-ch e ck for further data processing as an option. For other materials please ask us.

Compressed Air -Operated Diaphragm Pumps JP - 800JESSBERGER pumps are suitable for nearlyall areas of use. They are capable of pumpingaggressive and flammable substances, highlyviscous liquids also with solids or fibre particlesand media containing gas.

are suitable for the use of a bignumber of liquids. Particularly sui-table for highly viscous, neutral,aggressive liquids also with or with-out solids up to 100.000 mPas.

All pump parts are in sta i n l ess-ste e l ,stators are available in NBR, NBRlight, Vi ton, Hypalon, EPDM or P T F E .

High viscosity pumps JP-700 for drums and containers

JP-05JP-04JP-03JP-02

Hand-barrel pumps

Telescopic suction tube of PP,480 -950 mm, for fluid liquids.S u i ta b l ep a rt i c u l a rly fo racids and lye s .

Pump tube INOX, 700 -1000 mm, forhighly fluid to oilyliquids.S u i ta b l e p a rt i c u l a rlyfo r flammable liqu i d sand solvents.

Telescopic suction tube ofP P, 340-900 mmJ P-02 fo r Ac i d s,A l ka l i n eSolutions and wa ter basedC h e m i c a l s .J P-03 fo r Oil, Diesel, A l c o-hol (max. 50%), Anti fre e z el i quid, Soap solutions,S h a mpoo, Wa te r, etc.

a re lightwe i g h t, powerful pumps for almost any fluid liquids.


Documents

Electric Barrel and Container Pumps...Electric and pneumatic Barrel and Container Pumps 250 W Universalmotor 230 V 50Hz 2 - 4 kg 500/700/1.000/1.200 mm Lab pump 22/30/40 l/min 4 m