Embed Size (px)
Citation preview
Electric forward facing seat/ Three-in-one forklift EFX 410/413.
1000 and 1250 kg capacity.
1344
.GB.
1.05
.10.
r.r.s
· Te
chni
cal m
odifi
catio
ns re
serv
ed.
Jungheinrich UK Ltd.
Head Office:Sherbourne HouseSherbourne DriveTilbrookMilton Keynes MK7 8HXTelephone 01908 363100Fax 01908 363180
Jungheinrich trucks conform to the European Safety Requirements.
JungheinrichPlants, Sales and Services Europe ISO 9001/ ISO 14001
2
The EFX 410/413, built with a modulardesign offers a flexible solution for com-bined use in narrow aisles, wide aisles as well loading areas. The forward facingseat and the Tri-Lateral mast arrangement
allows the load to be picked up directlyfrom the floor. The Jungheinrich EFXoffers maximum flexibility and efficiencyfor lift heights up to 7000 mm.
3
Narrow aisle – wide aisle – free path.
The truck concept for flexible operation.
Narrow aisle warehouses require lessfloor space with high lift heights. Ad-vantages: ■ Good space utilisation.■ Direct access to each pallet space.■ FIFO-principle easily achieved.
The EFX is the ”key” to getting the mostout of these advantages. Its perform-ance guarantees a good combinationbetween racking and floor and createsthe best conditions for producing highthroughput rates.
5
3 ways. 2 Lifting capacity classes. 1 range.
The modular approach for the low lift narrow aisle trucks.
Application based capacity classes1000 kg (EFX 410) and 1250 kg (EFX 413)lifting capacities guarantee a cost effec-tive compliment to every application.Additionally, both models use state ofthe art controls for all motors with 48-volt-3-phase AC technology.
EFX 410■ 1000 kg capacity ■ 7000 mm lift height
EFX 413■ 1250 kg capacity ■ 7000 mm lift height
4
6 7
Advantage: All motors with 3-phase AC technology.
Drive your performance higher and your operating costs down!
3-phase AC technology has beenproven time and time again 3-phase AC technology is a type of cur-rent generated from the normal powersupply, proven time and time again in allareas of industry. The 3-phase AC tech-nology motors are characterised by asignificantly reduced number of compo-nents and moving parts. AC motorsoperate much more efficiently, reliablyand are more cost-effective.
Jungheinrich has made battery-powered forklifts ”fit for 3-phase AC technology” At the beginning of the 90s, Jungheinrichsucceeded in converting dc into ac in acost-effective way by using high per-formance frequency converters and thusmade the advantages of 3-phase ACtechnology usable for battery-poweredforklifts. The omission of direction con-
tactors and carbon brushes means aswell as the increase in performancethere is a significant reduction in oper-ating costs for order pickers and highrack stackers. Today, all main categoriesof Jungheinrich trucks are equipped with3-phase AC technology.
All motors with 3-phase AC technology The results of the EFX in using 3-phaseAC technology for drive, lifting andsteering motors is; higher productivityrates due to higher speed and strengthin high starting torques, even at lowrevs.
1 Steering motor 2 Driving motor 3 Lifting motor
1
2
3
Energy efficiency due to an energy recovery systemDuring both the lowering of the forksand wear-free deceleration inductive
braking, energy is returned to the bat-tery. The energy gained in this way isavailable for the next operational cur-rent demand in lifting or for travelling.
This lowers energy costs and prolongsthe life of the battery.
8 9
Advantage: Increase customer profitability.
While at the same time reducing budgets and costs.
Matched batteries and chargers More energy through synergy. Follow-ing this motto, Jungheinrich offers fork-lifts, batteries and chargers from a singlesource. A system that suits your require-ments 100 percent.
Your advantage: maximum use of yourtrucks, added energy when needed andcost effectiveness. This is more economicfor batteries and also budgets.
Good heat balance through optimised control modesDue to the laws of physics, heat sourcesalways cause energy loss. Jungheinrichhas reduced this to a minimum by theuse of 3-phase AC technology.
The Advantages:■ Significantly reduced heating of
motors through lower revs ■ Low increase of hydraulic oil
temperature through throttle-freevalve technology
■ Loss of passive hydraulic oil cooling via steel tanks by using corrosion free plastic tanks
■ Further reduction of energy consumption
1
2
3
1 Hydraulic drive 2 Valve block 3 Plastic tank
10 11
AC-Drive controllerThe new Jungheinrich AC-drive controllercombines the three basic functions hy-draulics, control and travelling into onesingle unit.
The Advantages:■ Powerful, effective control through
optimised efficiency ■ Maximum reliability through
an ideal interaction betweencontroller and drive components
■ Maximum serviceability through an easily exchangeable interface card
CAN-Bus-control for safe data transfer Hardly any other technology has in-fluenced the information exchangebetween on-board forklift componentsmore strongly than CAN-Bus. All sensorscommunicate with the on-board com-puter via simple data lines. Quality,speed and flexibility in data transfer viaCAN-Bus makes the use of the EFX assafe and reliable as never before.
Easily interchangeable interface card.All basic functions in one control block.
Advantage: High reliability.
Open CAN-Bus easily extended
1312
Advantage: Perfect vision.
You can trust your own vision.
The elevated driver’s seat combined withthe laterally positioned mast guaranteesa clear vision of the working area and
the load. The advantage is immediatelyobvious; improved handling throughputrate through high visability.
14 15
Steering wheel Drive regulator
1 Position of steering wheel 2 Travel speed selected3 Attachment operation 4 Selection inductive guidance 5 Time 6 Operating hours 7 Battery charge condition 8 Fork height 9 Travelling direction indicator 10 Load carrying unit position
1
2
3 4
910
5 67
8
Safe grip and intuitive, precise control through thumb movement.
Graphics capable display
1
2
3
4
5
6
7
89
10
11
Advantage: Perfect ergonomics.
Form follows function.
Intuitive control for more comfort and speedLet your hands do the talking as the lift-ing and lowering movements are con-trolled by thumb actions on the EFX: If the thumb moves upwards, the liftingmovement is activated. If the thumb
moves downwards, the lowering move-ment is activated. These natural motionsnot only simplify work, they are alsoparticularly easy on the wrists.
Everything under control on the console Because the console is adjustable to thedriver for height and distance, the EFXcan be steered with ease. The graphicdisplay shows the most important dataquickly, clearly arranged and easily legi-ble with the use of symbols.
The steering performance of the generously sized steering wheel can be adjusted to individual requirements.
1 Steering wheel 2 Selection switch, rotate/traverse 3 Programmable keys
(e.g. Turning on/off of guide control via tracks or inductive guide wire)
4 Graphic display 5 Key pad pre-height selection
(optional extra)6 Hand rest
Lifting/Lowering/Rotating/Traversing7 Horn8 Armrest9 Emergency stop10 Key switch11 Travel direction indicator switch
16 17
The easily accessible pedal switch for releasing the dead man brake increases the safety for the operator.
Easy entry and exit over a low cabin floor.
Safety and comfort right from the startEfficiency begins in the driver’s cabin –with the operator. A multitude of per-formance enhancing ergonomic featuresconsiderably assists in day to day work.
■ Wide foot and legroom ■ Comfort seat which absorbs
vibrations and is adjustable to height and weight
■ Comfort seat with adjustable armrest (left) and armrest (right)
■ Pedals arranged as in a car ■ High quality craftsmanship ■ All controls can be reached
easily and quickly
0 12 24 36 48 60 72 84Planning horizon in months
10
5
0
Stable basic requirement(constant utilisation or classic financing, e.g. Rental, Leasing, Lease Purchase)
0 12 24 36 48 60 72 84
10
5
0
Flexible requirement(contracts with flexible contract period)
0 12 24 36 48 60 72 84
10
5
0
Requirement (number of trucks)
Seasonal requirement/requirement peaks(short-term Rental – 1 day to 12 months)
18 19
Financial Services and Rental ServiceJungheinrich provides you with a numberof tailor-made solutions that optimallyadapt to your general economic, tax and balance sheet conditions – even if these change during the course oftime. So that you always react flexibly.Your specialist adviser will be pleased tocalculate which solution would be themost optimal for your application.
Direct Customer Service network Circa 500 of our own service engineersare available in 6 countrywide locations.Every one of them is a Jungheinrichprofessional: mechanic, electrician, elec-tronics and hydraulics specialist com-bined in one person. And he will usuallybe with you within four hours.
For the right truck the right racking Jungheinrich provides you with thecomplete solution: comprehensive ware-house planning that sees truck andracking as a system working “hand inhand”. From projecting via CAD plan-ning to handing over the key. Fromshelving via system-built platforms rightup to high bay racking. From consulta-tion via assembly to Service. Everythingfrom one supplier. Everything fromJungheinrich, your “architect” for com-plete internal logistics.
Complete solutions for complete internal logistics.
Customer Service, Racking Systems, Warehouse Planning, Rental/Financial Services.
Pallet trucks, forklift trucks, order pickersand tow tractors in more than 600 truck variants. Added to this is a multi-tude of additional services. This makesJungheinrich into an internal a logisticsservices provider who will pave your way towards a complete logistics solu-tion.
