Upload
hoangkhue
View
223
Download
1
Embed Size (px)
Citation preview
Electrical Network Solutions
Make High-AvailabilityConnections and Protect
Mission-CriticalEquipment!
Connect and Protect Your Electrical Network with Thomas & Betts Solutions.
MVIMoldedVacuum
FaultInterruptersHigh-Side
TransformerProtection
Local/RemoteOperation
SecondaryRelay
Outputs
NetworkProtector
NetworkProtector
Fuse
Trip
Transformer
• High-conductivity connectors feature precision-molded
EPDM rubber insulation
• Perfect insulation integrity — connectors
are 100% factory dielectrically tested
• Accommodate 120/128 VAC
and 265/460 VAC
fuse limiters
FS 66-175
FS 175-6
FTT 1175 Series Rocket(Flood-Seal® InsulatingRocket for use with all
FS 175 Connectors)
Flood-Seal® 175 Series Bus Connectors
• Provide permanent
compression on the tap
while allowing future
disconnectability
• Constructed of cast copper
and seamless copper tubing
• Tin-plated for corrosion
resistance
Copper Clamp-Type Tee Connectors
Flood-Seal® 125 Series Transformer Spade Connectors
• Enable you to pull multiple
services off of a 4-hole pad
• Provide maximum contact
to ensure cooler operating,
more reliable joints
FTN 125-4NFTN 125-44NDouble Row
Electrical networks must ensure 100% continuity of power. For unmatched reliability with your electrical network, you need
Thomas & Betts protective devices.
Utilities everywhere count on our solutions to help them make high-availability connections to subscribers and to protect
equipment against overcurrent, excessive pressure/temperature and withstand overload conditions. From point of production
to point of consumption, nobody helps to connect and protect your electrical network like Thomas & Betts.
Flood-Seal® 175 SeriesNetwork-TransformerProtection Connectors
FTT 55-175 Vertical(Clamp-On Style for Studs)
FTN 175-33 Double Row(Spade Mount)
• Enable you to pull multiple services off
of either a transformer stud or a spade
• Multi-tap connectors and compact design
conserve vault and manhole space
• Call for custom configurations
• Submersible for use
in underground vaults
• Available in aluminum
or copper
• For AL/CU 2-hole NEMA lugs
• Use with FS 1175
insulating rockets
FTH 55-175 Horizontal(Clamp-On Style for Studs)
h Thomas & Betts Solutions.
MVIoldedcuum
Faultrrupters High-Side
TransformerProtection
NetworkService Bus
NetworkProtector
Fuse
NetworkProtector
SecondaryRelay
Outputs
Transformer
Trip
Local/RemoteOperation
• Make, carry and automatically
interrupt currents through
12.5kA symmetrical on 5 to
35kV distribution systems
• Trip high-side protection to
isolate transformer in case of high-
pressure/temperature, fire, overcurrent
CS 2011 Rocket
5–35kV MVI Molded VacuumFault Interrupters
Custom SolutionsDesigned for Your Network.Designing a purpose-built network can pose a challenge to the
engineer who needs specialized connectors. Thomas & Betts
can help with custom network products. Contact us
and we’ll put our engineering team to work for you.
High-Density Cable Bus Connectors
Increase density by two to three times over standard cable
bus systems.
• The only connector of its kind that provides
up to three 500 kcmil paralleling taps
on four inches of bus
• Bolted design and clamshell insulator
for fast and easy installation
• Formed insulator with integral
sealant eliminates taping
• Call for custom
configurations
CBC 1500-3500
• No soldering required —
use conventional
compression lugs instead
• Made of tin-plated copper
• Can be supplied with
Flood-Seal® rockets
or heat-shrink insulation
FS 22-150 CU
High-Ampacity DistributionBus Connectors
5–25kV 600 SeriesDeadbreak Cable Joints
• Compact design provides maximum contact
to ensure cooler operating, more reliable joints
• Separable medium voltage cable joints are
available in a 2-way (I), 3-way (Y) and 4-way
(H) configurations
• Operating accessories are available for
isolation and grounding
Electrical Network Solutions
Ordering Information for Vertical Cable LeadsCat. No. No. of Outlets Height Stud Size
FTT 44–175–15 8 93⁄4 11⁄2
FTT 44–175–30 8 93⁄4 3
For copper connectors, add “-CU” suffix to the catalog number.
Ordering Information for Horizontal Cable LeadsCat. No. No. of Outlets Height Stud Size
FTH 22-175-15 4 93⁄8 11⁄2
FTH 33-175-15 6 117⁄8 11⁄2
FTH 44-175-15 8 143⁄8 11⁄2
FTH 55-175-15 10 167⁄8 11⁄2
FTH 22-175-30 4 93⁄8 3
FTH 33-175-30 6 117⁄8 3
FTH 44-175-30 8 143⁄8 3
FTH 55-175-30 10 167⁄8 3
For copper connectors, add “-CU” suffix to the catalog number.
Ordering Information for Spade ConnectorsSingle Row Configuration Double Row Configuration
Cat. No. No. of Outlets Cat. No. No. of Outlets
FTN 175-4R 4 FTN 175-22 4
FTN 175-4L 4 FTN 175-33 6
FTN 175-5R 5 FTN 175-44 8
FTN 175-5L 5 FTN 175-55 10
FTN 175-6R 6 FTN 175-66 12
FTN 175-6L 6
“R” suffix indicates right-hand; “L” suffix indicates left-hand.
Flood-Seal® 175 Series Clamp-On StyleNetwork-Transformer Protection Connectors
Flood-Seal® 175 Series Spade StyleNetwork-Transformer Protection Connectors
Ordering Information for Aluminum 125 SeriesOne Hole Two Hole
Cat. No. No. of Outlets Cat. No. No. of Outlets
FTN 125-2 2 FTN 125-2N 2
FTN 125-3 3 FTN 125-3N 3
FTN 125-4 4 FTN 125-4N 4
FTN 125-5 5 FTN 125-5N 5
FTN 125-6 6 FTN 125-6N 6
FTN 125-44* 8 FTN 125-44N* 8
*Double-row configuration.
Aluminum Flood-Seal® 125 SeriesTransformer Spade Connectors
High-Ampacity Distribution Bus Connectors
Ordering Information for Separable Cable JointsCat. No. Description
K656I-WOX Separable Straight Joint Pkg. (2-way) w/Test Point
K656I-HP Basic Housing Pkg. Straight Joint w/Test Point
K656CY-WOX Separable “Y” Joint Pkg. (3-way) w/Test Point
K656CY-HP Basic Housing Pkg. “Y” Joint w/Test Point
K656CH-WOX Separable “H” Joint Pkg. (4-way) w/Test Point
K656CH-HP Basic Housing Pkg. “H” Joint w/Test Point
Ordering Information for High-Ampacity Bus ConnectorsCat. No. Description
FS 22-150 CU Tin-Plated High-Ampacity Distribution Bus Connector
CS 2011 Flood-Seal® Rocket
Call for custom configurations.
5–25kV 600 Series Deadbreak Cable JointsOrdering Information for Aluminum 175 Series
One-Way Configuration Two-Way Configuration
Cat. No. No. of Outlets Cat. No. No. of Outlets
FS 175-2 2 FS 22-175 4
FS 175-3 3 FS 33-175 6
FS 175-4 4 FS 44-175 8
FS 175-5 5 FS 55-175 10
FS 175-6 6 FS 66-175 12
FS 175-7 7 FS 88-175 16
FS 175-8 8 FS 1010-175 20
FS 1212-175 24
For copper connectors, add “-CU” suffix to the catalog number.
Flood-Seal® 175 Series Bus Connectors
Ordering Information for Clamp-Type Tee ConnectorsConductor Size
Cat. No. Run Tap*
2131-1 750 kcmil 2/0 str.
2131-7 1000 kcmil 2/0 str.
2131-14 1500 kcmil 2/0 str.
* Available in conductor tap sizes from 2/0 AWG str. up to and including the same size as the run. Call for ordering information.
Copper Clamp-Type Tee Connectors
Thomas & Betts CorporationUtility Group8155 T&B Blvd.Memphis, TN 38125P: 800.326.5282F: 800.888.0690
©2009 Thomas & Betts Corporation. All rights reserved. Printed in the USA. 3/09/3M PB-NET-0309
utility.tnb.com
High-Density Cable Bus Connectors
Ordering Information for High-Density Bus ConnectorsCat. No. Description
CBC 1500-3500 High-Density Cable Bus Connector
Call for custom configurations.
5–35kV MVI Molded Vacuum Fault Interrupters
Ordering Information for Molded Vacuum InterruptersCat. No. Description
NMVI3-21-kV*-XX** 3 phase, network molded vacuum interrupter
* kV = 15, 27 or 35; **XX = 2 for 200 amp wells, 6 for 600 amp bushings
Call for other configurations.