Dublin Toyota

ABB 24kw Mounted on Wall

One CPE250 charger

CPF50 Chargers (2)

Two CPE250 chargers not Paired

Two CPE250 chargers not Paired which will require directional boring across driveway

277/480 Transformer

CP Home Unit

ABB Terra 54kw charger customer facing

Electrical Room

Site contact

Customer facing CT4K

• Site has a dual port Leviton on a double pole 40amp circuit. If wire size is correct for the CT4K then this will be a rip & replace. If new wire is needed the run is 87ft for electrical room to current Leviton location.

View of main electrical room

CPH50 to be installed in showroom. This unit will not be energized. Unit will be replacing the Hydrogen demo

ABB 24KW – 120/240 in service

• Come out of electrical panel and go up to ceiling 12ft, make a 90deg turn, go across ceiling of electrical room 12ft to pullbox.

Pullbox. 24KW 120/240.Continued from page 5. Come out of pull box in shop. Run conduit 6ft, make a bend to the right, run conduit 72 ft to door. Penetrate wall to outside, come down wall 9ft, mount ABB next to Leviton

Replace Leviton at service with CPF50

ABB 24kw Wallbox Charger –Mounted on Wall

277/480 Transformer – assume new service here

One CPE250 charger

CPF50 Chargers (2) – Mounted on Wall

Two CPE250 chargers not Paired

Two CPE250 chargers not Paired which will require directional boring across driveway

CP Home Unit

ABB Terra 54kw charger customer facing – location TBD

Electrical Room