Upload
anonymous-tqvs8fd
View
220
Download
0
Embed Size (px)
Citation preview
7/25/2019 elektron-ang.pdf
http://slidepdf.com/reader/full/elektron-angpdf 1/24
500 to 4,500 kN
7/25/2019 elektron-ang.pdf
http://slidepdf.com/reader/full/elektron-angpdf 2/24
All-Electric Injection Molding for Everyone
The ELEKTRON Series is the product of Milacron‘s years of innovation in all-electric injection molding technology.The ELEKTRON is designed for a full range of standard applications, and offers outstanding value to manufacturers.The advantages of all-electric injection molding include:
Uses 60 % less energy and 90 % less water than hydraulic injection molding machines
Parallel movements for optimal cycle times
Exceptional part quality with excellent mold protection thanks to strokeaccuracy of .01 millimeter
Minimal rejects with maximum repeatability and machine availability
Suitable for all standard applications
Ideal for clean room operations since no oil is used
Minimal noise – perfect for personnel-intensive operations and assembly areas
2
7/25/2019 elektron-ang.pdf
http://slidepdf.com/reader/full/elektron-angpdf 3/24
Medical
Electrical & Telecommunication
Consumer Goods
Clamping Unit (Clamping Force [kN])
Screw Diameter [mm]
I n j e c t i o n U n i t
( I n t e r n a t i o n a l S i z e )
3,470 70/80/90
2,290 60/70/80
1,540 50/60/70 50/60/70 50/60/70
970 45/50/60 45/50/60 45/50/60630 40/45/50 40/45/50 40/45/50 40/45/50
450 35/40/45 35/40/45 35/40/45 35/40/45 35/40/45
300 30/35/40 30/35/40 30/35/40 30/35/40 30/35/40
120 18/25/30 18/25/30 18/25/30
55 18/20/22
500 750 1,100 1,550 1,800 2,000 2,600 3,500 4,500
3
7/25/2019 elektron-ang.pdf
http://slidepdf.com/reader/full/elektron-angpdf 4/24
Optimized Movement for Optimal Cycle Times
As with accumulator-driven hydraulic machines, ELEKTRON offers parallel movements as a standard feature.The result is excellent machine dynamics:
Tie-bar spacing with a stiff platen and highly sensitive mold safety ensure long-term part-quality and mold life.The mold installation area is easily accessed, allowing for quick mold changes.
4
7/25/2019 elektron-ang.pdf
http://slidepdf.com/reader/full/elektron-angpdf 5/24
With locations in the US, India, China, and Germany, manufacturers in the Milacron group have been buildingall-electric injection molding machines for more than 25 years:
The ELEKTRON is based on the proven ELEKTRA series. Both machines share the same platform:service, spare parts and retrofits are available through Ferromatik Milacron’s SERVTEK customer supportin Malterdingen, Germany. The high quality standards for the machines are assured worldwide throughexperienced product management.
5
7/25/2019 elektron-ang.pdf
http://slidepdf.com/reader/full/elektron-angpdf 6/24
Precise Movements Ensure Quality Parts for the Long Term
All-electrics set the standard for movement repeatability. Exact movements are assured by the machines‘ drive componentsand robust mechanics. This ensures consistent part quality for the long term. The stroke precision of servo-driven axes issignificantly greater than even the best hydraulic systems can provide. All this makes the ELEKTRON ideal for the reliable production of high-precision parts:
6
7/25/2019 elektron-ang.pdf
http://slidepdf.com/reader/full/elektron-angpdf 7/24
The electrical cabinet is integrated into the machine base. This design, with separate areas for controls and power components,as well as the location of the central processor in the operator panel, offers plenty of room for the available ELEKTRON options.An Ethernet Powerlink connection guarantees fast and reliable communications between the motor, amplifier, and machine controls.
7
7/25/2019 elektron-ang.pdf
http://slidepdf.com/reader/full/elektron-angpdf 8/24
Operator-friendly Controls
The new ENDURA touch controls were developed especially to meet the requirements of the ELEKTRON series.Machine operators will easily find their way around the system right from the start. ENDURA touch at a glance:
8
7/25/2019 elektron-ang.pdf
http://slidepdf.com/reader/full/elektron-angpdf 9/24
Every page can be accessed directly from an overview page
Enter mold data for mold closingand opening
Cylinder heating, including heating energyindicator and monitoring
Enter pressure, velocity, time and stroke
9
7/25/2019 elektron-ang.pdf
http://slidepdf.com/reader/full/elektron-angpdf 10/24
ELEKTRON 50 — 350
ELEKTRON 450
10
7/25/2019 elektron-ang.pdf
http://slidepdf.com/reader/full/elektron-angpdf 11/24
A B C D E F G H I J K L M N O P QELEKTRON 50 - 55 4,303 1,440 1,811 1,813 2,940 482 640 285 1,387 889 55 1,540 1,984 720 720 — —
ELEKTRON 50 - 120 4,303 1,440 1,811 1,813 2,490 512 640 285 1,387 889 55 1,540 2,004 720 720 — —
ELEKTRON 50 - 300 4,303 1,440 1,811 1,813 2,490 88 640 285 1,387 889 55 1,562 2,019 720 720 — —
ELEKTRON 75 - 120 4,475 1,565 1,831 1,965 2,510 532 790 352 1,248 915 66 1,586 2,050 783 783 — —
ELEKTRON 75 - 300 4,475 1,565 1,831 1,965 2,510 108 790 352 1,248 915 66 1,608 2,065 783 783 — —
ELEKTRON 75 - 450 4,475 1,565 1,831 1,965 2,510 -68 790 352 1,248 915 66 1,611 2,103 783 783 — —
ELEKTRON 110 - 120 4,589 1,285 2,034 2,079 2,510 532 700 322 1,304 915 66 1,642 2,105 580 705 — —
ELEKTRON 110 - 300 4,589 1,285 2,034 2,079 2,510 108 700 322 1,304 915 66 1,664 2,120 580 705 — —
ELEKTRON 110 - 450 4,589 1,285 2,034 2,079 2,510 -68 700 322 1,304 915 66 1,665 2,158 580 705 — —
ELEKTRON 155 - 300 5,215 1,455 2,018 2,470 2,745 343 890 292 1,386 935 66 1,746 2,203 670 785 516 —
ELEKTRON 155 - 450 5,215 1,455 2,018 2,470 2,745 170 890 292 1,386 935 66 1,749 2,241 670 785 604 —
ELEKTRON 155 - 630 5,215 1,455 2,018 2,470 2,745 -102 890 292 1,386 935 66 1,766 2,240 670 785 753 —
ELEKTRON 180 - 300 5,215 1,455 2,018 2,470 2,745 343 890 292 1,386 935 66 1,746 2,203 670 785 516 —
ELEKTRON 180 - 450 5,215 1,455 2,018 2,470 2,745 170 890 292 1,386 935 66 1,749 2,241 670 785 604 —
ELEKTRON 180 - 630 5,215 1,455 2,018 2,470 2,745 -102 890 292 1,386 935 66 1,766 2,240 670 785 753 —
ELEKTRON 200 - 450 6,398 1,805 2,085 2,870 3,379 -950 1,240 298 1,553 1,059 66 1,916 2,407 828 977 — —
ELEKTRON 200 - 630 6,398 1,805 2,085 2,870 3,379 -682 1,240 298 1,553 1,059 66 1,933 2,407 828 977 — —
ELEKTRON 200 - 970 6,398 1,805 2,085 2,870 3,379 -149 1,240 298 1,553 1,059 66 1,974 2,456 828 977 — —
ELEKTRON 260 - 630 6,825 1,833 2,256 3,180 3,645 -799 1,240 298 1,618 1,059 66 1,998 2,472 856 977 — —
ELEKTRON 260 - 970 6,825 1,833 2,256 3,180 3,645 -269 1,240 298 1,618 1,059 66 2,039 2,521 856 977 — —
ELEKTRON 260 - 1,540 6,825 1,833 2,256 3,180 3,645 108 1,240 298 1,618 1,059 66 2,065 2,690 856 977 — —
ELEKTRON 350 - 970 7,108 1,853 2,345 3,463 3,645 -282 1,340 298 1,663 1,057 66 2,110 2,700 883 970 — —
ELEKTRON 350 - 1,540 7,108 1,853 2,345 3,463 3,645 108 1,340 298 1,663 1,057 66 2,110 2,735 883 970 — —
ELEKTRON 450 - 1,540 7,945 2,143 2,557 3,953 3,992 265 1,436 440 1,722 955 66 2,282 2,794 1,039 1,104 — 2,789
ELEKTRON 450 - 2,290 7,945 2,143 2,557 3,953 3,992 194 1,436 440 1,722 955 66 2,596 2,715 1,039 1,104 — 2,789
ELEKTRON 450 - 3,470 7,945 2,143 2,557 3,953 3,992 -193 1,436 440 1,722 955 66 2,631 2,715 1,039 1,104 — 2,789
11
7/25/2019 elektron-ang.pdf
http://slidepdf.com/reader/full/elektron-angpdf 12/24
Clamping Unit
5-Point toggle system
Clamp movement via ball screw and belt drive
3 adjustable closed-loop opening and closing speeds
Clamping force adjustable
Automatic mold installation height adjustment
Position-based ramping for accurate switching and precise speed, pressure controls
High-sensitivity mold safety (stroke and force) adjustable in two stages
Mold safety with one try-again circuit
Automatic grease lubrication
Actual tonnage display on control panel
SPI ejector cross
Hydraulic or pneumatic core pull
Air valves
Machine height increased 100 mm
Ejector
Ejector movement via ball screw and belt drive
Forward speed adjustable in two stages
Speed and force adjustable on control panel
Pulsating ejector strokes, adjustable from 1 to 9
Zero point adjustableEjector forward dwell timer
Injection Unit
3 screw diameters available per injection unit
Nitrided barrel and screw
Bimetallic barrel and hardened screw
Barrel cover with perforated metal
Barrel cover V2A with insulation
Injection movement via ball screw and belt drive
Injection speed increased
5-Stage injection switchable by pressure, time, or position
10-Stage back pressure
5-Stage plasticizing switchable by position
Digital setting and read-out of screw RPM
Screw suck-back before and after plasticizing
Screw cold start protection
Semi-auto purge
Intrusion molding program
Sprue break with timer
Needle shut-off nozzle, pneumatic operated
Feed throat temperature indication and control
Material hopper
Adapter plate for coloring unit or hopper loader
Standard
Option
12
7/25/2019 elektron-ang.pdf
http://slidepdf.com/reader/full/elektron-angpdf 13/24
Standard
Option
Injection Unit
Control for coloring unit
Auto heat startup and shutdown
Actual current display of heating zones
Display of set and actual temperature with bar graph
Heaterband and thermocouple failure detection
Heat standby after achieving set number of cycles
Temperature and tolerance range monitoring for each zone
Controls
High-performance controls from B&R
Intuitive operations via 15" color touchscreen
No page more than two clicks away
Keypad for entering notes and information
32 function keys with LEDs, arranged around the touchscreen
Various interfaces (3 USB, RS232, Ethernet) for connecting external devices
Save mold data and screenshots to USB keys
Setpoint and actual values shown as absolute values
Plausibility check on values entered
Process monitoring with graphically displayed minimum, maximum, and average values
Graphical display of 33 parameters for the last 150 cycles
Summary of last 3,000 alarms with date and time stampsDisplay of last 3,000 setpoint-value changes (change log)
Internal memory for up to 200 mold data sets
3+3 freely configurable inputs and outputs for connecting peripheral devices
Data protection with four access levels for up to 100 machine operators
Choice of three languages
Drive Technology
Closed-loop control of all pressures, strokes and speeds
Servo-driven mold, ejector, plasticizing and injection movements
High-speed Ethernet POWERLINK connection between motor, amplifier and machine controls
Parallel mold, ejector and plasticizing movements
Other
Euromap mold mounting pattern
Mounting patterns to Euromap standards for robots on fixed platen
Moving platen supported on machine frame by glide shoes
Cooling water battery
Hosing from cooling water battery to stationary or moving platen
Part removal possible from two sides
Interface for robot to Euromap 67
Interface for conveyor belt
Receptacle packages
Electric panel integrated in the machine base
13
7/25/2019 elektron-ang.pdf
http://slidepdf.com/reader/full/elektron-angpdf 14/24
Technical Data and Clamp Dimensions
Clamping Unit 50
Clamping Force kN 500
Tie Bar Clearance (H x V) mm 320 x 320
Clamping Platens Size (H x V) mm 470 x 490
Mold Opening Stroke mm 260
Distance Between Platens max. mm 670
Mold Installation Height min. / max. mm 150 / 410
Mold Weight max. (moving / fixed) kg 290 / 145
Opening Force kN 165
Ejector Force kN 25
Ejector Stroke mm 125
Dry Cycle (Euromap 6) s-mm 1.7 - 224
Injection Unit 55 120 300
Screw Diameter mm 18 20 22 18 25 30 30 35 40
Injection Pressure max. bar 2,500 2,345 1,939 2,444 2,016 1,400 2,500 1,943 1,488
Stroke Volume max. cm³ 19 24 29 31 59 85 113 154 201
Injection Weight max. (PS) g 17 21 26 28 54 77 103 140 183
Screw Stroke mm 75 75 75 120 120 120 160 160 160
Unit Stroke mm 180 180 180 250 250 250 250 250 250
Nozzle Holding Force kN 30 30 30 30 30 30 30 30 30
Injection Rate cm³/s 52 64 78 52 101 145 117 159 208
Screw Speed min -1 400 400 400 400 400 400 400 400 400
Recovery Rate g/s 3.2 4 5 3 9 13 18 25 32
Active Screw Length L/D 22 21 19 20 20 20 22 23 20
Number of Heating Zones 3+1 3+1 3+1 3+1 3+1 3+1 4+1 4+1 4+1
Total Heating Capacity kW 4.8 4.9 4.9 4.6 6.7 7.9 9.2 11.2 11.2
General Data 50 - 55 50 - 120 50 - 300
Total Connected Power kW 11.3 11.4 11.4 11.4 12.7 14.7 20.9 22.3 22.3
Machine Dimensions (L x W x H) m 3.94 x 1.29 x 1.84 3.94 x 1.29 x 1.86 3.94 x 1.29 x 1.87
Net Weight kg 3,000 3,200 3,400
14
7/25/2019 elektron-ang.pdf
http://slidepdf.com/reader/full/elektron-angpdf 15/24
Technical Data and Clamp Dimensions
Clamping Unit 75
Clamping Force kN 750
Tie Bar Clearance (H x V) mm 405 x 380
Clamping Platens Size (H x V) mm 575 x 570
Mold Opening Stroke mm 320
Distance Between Platens max. mm 800
Mold Installation Height min. mm 150 / 480
Mold Weight max. (moving / fixed) kg 510 / 255
Opening Force kN 250
Ejector Force kN 25
Ejector Stroke mm 125
Dry Cycle (Euromap 6) s-mm 1.6 - 284
Injection Unit 120 300 450
Screw Diameter mm 18 25 30 30 35 40 35 40 45
Injection Pressure max. bar 2,444 2,016 1,400 2,500 1,943 1,488 2,445 1,985 1,569
Stroke Volume max. cm³ 31 59 85 113 154 201 173 226 286
Injection Weight max. (PS) g 28 54 77 103 140 183 158 206 261
Screw Stroke mm 120 120 120 160 160 160 180 180 180
Unit Stroke mm 250 250 250 250 250 250 250 250 250
Nozzle Holding Force kN 30 30 30 30 30 30 30 30 30
Injection Rate cm³/s 52 101 145 117 159 208 159 207 262
Screw Speed min -1 400 400 400 400 400 400 400 400 400
Recovery Rate g/s 3 9 13 18 25 32 28 40 43
Active Screw Length L/D 20 20 20 22 22.9 20 22 22.8 20
Number of Heating Zones 3+1 3+1 3+1 4+1 4+1 4+1 4+1 4+1 4+1
Total Heating Capacity kW 4.6 6.7 7.9 9.2 11.2 11.2 11.1 13.1 13.1
General Data 75 - 120 75 - 300 75 - 450
Total Connected Power kW 14.0 15.2 16.1 23.5 24.9 24.9 27.8 29.2 29.2
Machine Dimensions (L x W x H) m 4.36 x 1.42 x 1.93 4.36 x 1.42 x 1.95 4.36 x 1.42 x 1.98
Net Weight kg 4,500 4,700 4,950
15
7/25/2019 elektron-ang.pdf
http://slidepdf.com/reader/full/elektron-angpdf 16/24
Technical Data and Clamp Dimensions
Clamping Unit 110
Clamping Force kN 1,100
Tie Bar Clearance (H x V) mm 420 x 420
Clamping Platens Size (H x V) mm 650 x 650
Mold Opening Stroke mm 350
Distance Between Platens max. mm 830
Mold Installation Height min. / max. mm 150 / 480
Mold Weight max. (moving / fixed) kg 600 / 300
Opening Force kN 370
Ejector Force kN 30
Ejector Stroke mm 150
Dry Cycle (Euromap 6) s-mm 1.9 - 294
Injection Unit 120 300 450
Screw Diameter mm 18 25 30 30 35 40 35 40 45
Injection Pressure max. bar 2,444 2,016 1,400 2,500 1,943 1,488 2,445 1,985 1,569
Stroke Volume max. cm³ 31 59 85 113 154 201 173 226 286
Injection Weight max. (PS) g 28 54 77 103 140 183 158 206 261
Screw Stroke mm 120 120 120 160 160 160 180 180 180
Unit Stroke mm 250 250 250 250 250 250 250 250 250
Nozzle Holding Force kN 30 30 30 30 30 30 30 30 30
Injection Rate cm³/s 52 101 145 117 159 208 159 207 262
Screw Speed min -1 400 400 400 400 400 400 400 400 400
Recovery Rate g/s 3 9 13 18 25 32 28 40 43
Active Screw Length L/D 20 20 20 22 23 20 22 22.8 20
Number of Heating Zones 3+1 3+1 3+1 4+1 4+1 4+1 4+1 4+1 4+1
Total Heating Capacity kW 4.6 6.7 7.9 9.2 11.2 11.2 11.1 13.1 13.1
General Data 110 - 120 110 - 300 110 - 450Total Connected Power kW 16.6 17.9 18.7 26.1 27.5 27.5 30.5 31.9 31.9
Machine Dimensions (L x W x H) m 4.51 x 1.42 x 2.00 4.51 x 1.42 x 2.01 4.77 x 1.42 x 2.04
Net Weight kg 5,370 5,500 5,750
16
7/25/2019 elektron-ang.pdf
http://slidepdf.com/reader/full/elektron-angpdf 17/24
Technical Data and Clamp Dimensions
Clamping Unit 155
Clamping Force kN 1,550
Tie Bar Clearance (H x V) mm 520 x 520
Clamping Platens Size (H x V) mm 780 x 780
Mold Opening Stroke mm 440
Distance Between Platens max. mm 1,030
Mold Installation Height min. / max. mm 200 / 590
Mold Weight max. (moving / fixed) kg 1,125 / 560
Opening Force kN 500
Ejector Force kN 35
Ejector Stroke mm 150
Dry Cycle (Euromap 6) s-mm 2 - 364
Injection Unit 300 450 630
Screw Diameter mm 30 35 40 35 40 45 40 45 50
Injection Pressure max. bar 2,500 1,943 1,488 2,445 1,985 1,569 2,494 1,970 1,596
Stroke Volume max. cm³ 113 154 201 173 226 286 251 318 393
Injection Weight max. (PS) g 103 140 183 158 206 261 229 289 357
Screw Stroke mm 160 160 160 180 180 180 200 200 200
Unit Stroke mm 250 250 250 250 250 250 300 300 300
Nozzle Holding Force kN 30 30 30 30 30 30 30 30 30
Injection Rate cm³/s 117 159 208 159 207 262 207 262 324
Screw Speed min -1 400 400 400 400 400 400 400 400 400
Recovery Rate g/s 18 25 32 28 40 43 40 47 56
Active Screw Length L/D 22 22.9 20 22 22.8 20 22 22.2 20
Number of Heating Zones 4+1 4+1 4+1 4+1 4+1 4+1 4+1 4+1 4+1
Total Heating Capacity kW 9.2 11.2 11.2 11.1 13.1 13.1 12.8 14.8 14.8
General Data 155 - 300 155 - 450 155 - 630Total Connected Power kW 26.9 28.3 28.3 31.2 32.6 32.6 32.4 33.8 33.8
Machine Dimensions (L x W x H) m 5.20 x 1.52 x 2.10 5.20 x 1.52 x 2.10 5.41 x 1.52 x 2.10
Net Weight kg 7,400 7,650 7,800
17
7/25/2019 elektron-ang.pdf
http://slidepdf.com/reader/full/elektron-angpdf 18/24
Technical Data and Clamp Dimensions
Clamping Unit 180
Clamping Force kN 1,800
Tie Bar Clearance (H x V) mm 520 x 520
Clamping Platens Size (H x V) mm 780 x 780
Mold Opening Stroke mm 440
Distance Between Platens max. mm 1,030
Mold Installation Height min. / max. mm 200 / 590
Mold Weight max. (moving / fixed) kg 1,125 / 560
Opening Force kN 540
Ejector Force kN 35
Ejector Stroke mm 150
Dry Cycle (Euromap 6) s-mm 2 - 364
Injection Unit 300 450 630
Screw Diameter mm 30 35 40 35 40 45 40 45 50
Injection Pressure max. bar 2,500 1,943 1,488 2,445 1,985 1,569 2,494 1,970 1,596
Stroke Volume max. cm³ 113 154 201 173 226 286 251 318 393
Injection Weight max. (PS) g 103 140 183 158 206 261 229 289 357
Screw Stroke mm 160 160 160 180 180 180 200 200 200
Unit Stroke mm 300 300 300 300 300 300 300 300 300
Nozzle Holding Force kN 30 30 30 30 30 30 30 30 30
Injection Rate cm³/s 117 159 208 159 207 262 207 262 324
Screw Speed min -1 400 400 400 400 400 400 400 400 400
Recovery Rate g/s 18 25 32 28 40 43 40 47 56
Active Screw Length L/D 22 22.9 20 22 22.8 20 22 22.2 20
Number of Heating Zones 4+1 4+1 4+1 4+1 4+1 4+1 4+1 4+1 4+1
Total Heating Capacity kW 9.2 11.2 11.2 11.1 13.1 13.1 12.8 14.8 14.8
General Data 180 - 300 180 - 450 180 - 630Total Connected Power kW 26.9 28.3 28.3 31.2 32.6 32.6 32.4 33.8 33.8
Machine Dimensions (L x W x H) m 5.20 x 1.52 x 2.10 5.20 x 1.52 x 2.10 5.41 x 1.52 x 2.10
Net Weight kg 7,400 7,650 7,800
18
7/25/2019 elektron-ang.pdf
http://slidepdf.com/reader/full/elektron-angpdf 19/24
Technical Data and Clamp Dimensions
Clamping Unit 200
Clamping Force kN 2,000
Tie Bar Clearance (H x V) mm 570 x 570
Clamping Platens Size (H x V) mm 810 x 810
Mold Opening Stroke mm 510
Distance Between Platens max. mm 1,220
Mold Instal lation Height min. / max. mm 200 / 710
Mold Weight max. (moving / fixed) kg 1,270 / 630
Opening Force kN 600
Ejector Force kN 45
Ejector Stroke mm 150
Dry Cycle (Euromap 6) s-mm 2.2 – 399 (estimated)
Injection Unit 450 630 970
Screw Diameter mm 35 40 45 40 45 50 45 50 60
Injection Pressure max. bar 2,445 1,985 1,569 2,494 1,970 1,596 2,300 2,058 1,429
Stroke Volume max. cm³ 173 226 286 251 318 393 382 471 679
Injection Weight max. (PS) g 158 206 261 229 289 357 348 429 618
Screw Stroke mm 180 180 180 200 200 200 240 240 240
Unit Stroke mm 300 300 300 300 300 300 300 300 300
Nozzle Holding Force kN 30 30 30 30 30 30 30 30 30
Injection Rate cm³/s 159 207 262 207 262 324 317 392 565
Screw Speed min -1 400 400 400 400 400 400 350 350 350
Recovery Rate g/s 28 40 43 40 47 56 46 58 80
Active Screw Length L/D 22 22.8 20 22 22.2 20 22 24.2 20
Number of Heating Zones 4+1 4+1 4+1 4+1 4+1 4+1 4+1 4+1 4+1
Total Heating Capacity kW 11.1 13.1 13.1 12.8 14.8 14.8 16.6 20 20
General Data 200 - 450 200 - 630 200 - 970Total Connected Power kW 31.2 32.6 32.6 32.4 33.8 33.8 34.7 36.6 36.6
Machine Dimensions (L x W x H) m 6.30 x 1.80 x 2.60 6.30 x 1.80 x 2.60 6.50 x 1.80 x 2.60
Net Weight kg 9,150 9,400 10,150
19
7/25/2019 elektron-ang.pdf
http://slidepdf.com/reader/full/elektron-angpdf 20/24
Technical Data and Clamp Dimensions
Clamping Unit 260
Clamping Force kN 2,600
Tie Bar Clearance (H x V) mm 660 x 660
Clamping Platens Size (H x V) mm 940 x 940
Mold Opening Stroke mm 600
Distance Between Platens max. mm 1,350
Mold Installation Height min. / max. mm 200 / 750
Mold Weight max. (moving / fixed) kg 1,950 / 980
Opening Force kN 780
Ejector Force kN 60
Ejector Stroke mm 160
Dry Cycle (Euromap 6) s-mm 2.52 – 462
Injection Unit 630 970 1,540
Screw Diameter mm 40 45 50 45 50 60 50 60 70
Injection Pressure max. bar 2,494 1,970 1,596 2,300 2,058 1,429 2,300 1,942 1,427
Stroke Volume max. cm³ 251 318 393 382 471 679 550 792 1,078
Injection Weight max. (PS) g 229 289 357 348 429 618 500 720 981
Screw Stroke mm 200 200 200 240 240 240 280 280 280
Unit Stroke mm 400 400 400 400 400 400 400 400 400
Nozzle Holding Force kN 30 30 30 30 30 30 30 30 30
Injection Rate cm³/s 207 262 324 317 392 565 550 792 1,087
Screw Speed min -1 400 400 400 350 350 350 300 300 300
Recovery Rate g/s 40 47 56 46 58 80 46 70 90
Active Screw Length L/D 22 22.2 20 22 24.2 20 22 23.6 20
Number of Heating Zones 4+1 4+1 4+1 4+1 4+1 4+1 4+1 4+1 4+1
Total Heating Capacity kW 12.8 14.8 14.8 16.6 20 20 20 25.4 25.4
General Data 260 - 630 260 - 970 260 - 1,540Total Connected Power kW 37.2 38.6 38.6 52.7 54.6 54.6 51.7 63.6 63.6
Machine Dimensions (L x W x H) m 6.90 x 2.10 x 2.50 6.90 x 2.10 x 2.50 7.40 x 2.10 x 2.50
Net Weight kg 13,000 13,500 14,000
20
7/25/2019 elektron-ang.pdf
http://slidepdf.com/reader/full/elektron-angpdf 21/24
Technical Data and Clamp Dimensions
Clamping Unit 350
Clamping Force kN 3,500
Tie Bar Clearance (H x V) mm 720 x 720
Clamping Platens Size (H x V) mm 1,030 x 1,030
Mold Opening Stroke mm 675
Distance Between Platens max. mm 1,475
Mold Installation Height min. / max. mm 250 / 800
Mold Weight max. (moving / fixed) kg 2,630 / 1,320
Opening Force kN 990
Ejector Force kN 75
Ejector Stroke mm 200
Dry Cycle (Euromap 6) s-mm 2.6 - 504
Injection Unit 970 1,540
Screw Diameter mm 45 50 60 50 60 70
Injection Pressure max. bar 2,300 2,058 1,429 2,300 1,942 1,427
Stroke Volume max. cm³ 382 471 679 550 792 1,078
Injection Weight max. (PS) g 348 429 618 500 720 981
Screw Stroke mm 240 240 240 280 280 280
Unit Stroke mm 400 400 400 400 400 400
Nozzle Holding Force kN 30 30 30 30 30 30
Injection Rate cm³/s 317 392 565 550 792 1,087
Screw Speed min -1 350 350 350 300 300 300
Recovery Rate g/s 46 58 80 46 70 90
Active Screw Length L/D 22 24.2 20 22 23.6 20
Number of Heating Zones 4+1 4+1 4+1 4+1 4+1 4+1
Total Heating Capacity kW 16.6 20 20 20 25.4 25.4
General Data 350 - 970 350 - 1,540Total Connected Power kW 58.3 60.2 60.2 67.3 69.2 69.2
Machine Dimensions (L x W x H) m 7.00 x 2.10 x 2.50 7.40 x 2.10 x 2.50
Net Weight kg 16,500 17,300
21
7/25/2019 elektron-ang.pdf
http://slidepdf.com/reader/full/elektron-angpdf 22/24
Ø 2 7
1020
9 8 0
Ø 5 2 . 4
1240
1530
Ø150
*944
M 2 0 X 5 0
*1009
2 8 0
4 2 0
5 6 0
7 0 0
8 4 0
9 8 0
1 1 2 0
1 0 1 . 6
1 5 2 . 4
4 0 6 . 4
7 1 1 . 2
1 2 3 0
101.6
152.4
406.4
711.2
280
420
560
700
840
980
1120
OP. GATE INSIDE NON-OP. GATE INSIDE
512
M 2 4
Ø 1 6 0 H 830
MAX.1640
Ø 1 1 0
Ø 1 6 4
.
Ø 2 0 0
0-200
MIN.350
MAX. 820
. .
470
820
StationaryPlaten
MovingPlaten
R15
Ø4
.
. .
All Dimesnsions AreIn MM
.
. .
* InsideGate Dimensions
Technical Data and Clamp Dimensions
Clamping Unit 450
Clamping Force kN 4,500
Tie Bar Clearance (H x V) mm 870 x 830
Clamping Platens Size (H x V) mm 1,240 x 1,200
Mold Opening Stroke mm 820
Distance Between Platens max. mm 1,640
Mold Installation Height min. / max. mm 350 / 820
Mold Weight max. (moving / fixed) kg 5,725 (3,815 / 1,910)
Opening Force kN 1,260
Ejector Force kN 110
Ejector Stroke mm 200
Dry Cycle (Euromap 6) s-mm 2.8 - 581
Injection Unit 1,540 2,290 3,470
Screw Diameter mm 50 60 70 60 70 80 70 80 90
Injection Pressure max. bar 2,300 1,942 1,427 2,238 1,856 1,421 2, 289 1,917 1,515
Stroke Volume max. cm³ 550 792 1,078 905 1,232 1,608 1,385 1,810 2,290
Injection Weight max. (PS) g 523 753 1,025 861 1,172 1,530 1,318 1,722 2,179
Screw Stroke mm 280 280 280 320 320 320 360 360 360
Unit Stroke mm 400 400 400 400 400 400 400 400 400
Nozzle Holding Force kN 30 30 30 30 30 30 30 30 30
Injection Rate cm³/s 550 792 1,078 427 580 758 580 758 961
Screw Speed min -1 300 300 300 250 250 250 220 220 220
Recovery Rate g/s 46 70 90 56 77 101 61 86 114
Active Screw Length L/D 22 23.6 20 26.7 22.9 20 25.7 22.5 20
Number of Heating Zones 4+1 4+1 4+1 4+1 4+1 4+1 4+1 4+1 4+1
Total Heating Capacity kW 20 25.4 25.4 39.6 39.6 39.6 57.9 57.9 57.9
General Data 450 - 1,540 450 - 2,290 450 - 3,470Total Connected Power kW 86.3 90.1 90.1 98.6 98.6 98.6 118.4 118.4 118.4
Machine Dimensions (L x W x H) m 8.1 x 1.8 x 2.7 8.1 x 1.8 x 2.7 8.4 x 1.8 x 2.7
Net Weight kg 23,500 25,000 27,000
22
7/25/2019 elektron-ang.pdf
http://slidepdf.com/reader/full/elektron-angpdf 23/24
Changes reserved. 23
7/25/2019 elektron-ang.pdf
http://slidepdf.com/reader/full/elektron-angpdf 24/24
Ferromatik Milacron GmbH I Riegeler Str. 4 I 79364 Malterdingen I Germany
+49 (0)7644 78-0 I [email protected] I www.ferromatik.com