Improve the air quality and eliminate all odours from incontinence and medical conditions. Improve the healthcare of care home residents, staff and visitors alike. The AS10/AS10X is completely silent using our unique thermal UV to eliminate unpleasant odours and control harmful bacteria and viruses both in the air and on all exposed surfaces 24 hours a day, 365 days a year.

The AS10/AS10X is completely safe for use in an area of continuous occupation such as care home bedrooms. Poor ventilation, incontinence and medical conditions create bacteria, and in many cases even regular cleaning and disinfecting are simply not enough. The addition of masking agents can make odours worse and do nothing to control the spread of micro-organisms. Airsteril gets to the root cause of the problem by controlling the bacteria and viruses, therefore improving the air quality and eliminating mould.

HEALTHCARE PROBLEMS• Embarrassing odours, perceived poor hygiene and lack of care• Poor air quality, poor ventilation and recycled air for everyone to

breath• Infections, Norovirus, Common Cold, Bronchial Pneumonia,

Influenza• Increased staff absenteeism, increased costs of agency personnel• Higher cleaning costs and premature replacement of carpets and

soft furnishings

ELIMINATE ODOUR CONTROL INFECTIONHEALTH AND COMFORT CAN BE SERIOUSLY AFFECTED BY POORQUALITY AIR IN ENCLOSED SPACES

PERFECT FOR USE IN• Residential Care Homes, Hospital

Bedrooms, GP Waiting Rooms, Dentists Consulting Rooms and Surgeries

HEALTHCARE RANGEAS10, AS10X

• Improve the environment and protect residents, staff, patients and visitors alike

• Clear embarrassing odours, eliminate masking agents• Control bacteria and viruses in the air and on all exposed surfaces• Improve infection control and hygiene standards• Reduce absenteeism and labour costs• Extend the life of carpets and soft furnishings to normal wear life• Improve the care home image and increase occupancy rates

BENEFITS BY USING AIRSTERIL

In September 2009 the Health Protection Agency’s laboratories at Porton Down performed efficacy testing of the Airsteril MP20 Unit’s ability to reduce aerosol and surface microbial contamination.

The tests showed a reduction of airborne microorganisms of up to 98.11% within five minutes of exposure and a reduction of surface contamination up to 59.47% in one hour, the surface tests included MRSA.

The full HPA report is available free of charge on request.

PERFECT FOR USE IN• Residential Care Homes• Hospital Bedrooms• GP Waiting Rooms• GP and Dentists Consulting Rooms

and Dentist Decontamination Rooms

The AS10/AS10X is silent so even a light sleeper is not disturbed. It operates by UV and the unique Airsteril thermal convection concept which delivers purifying plasma to every nook and cranny in a room to control infections by killing the micro-organisms both in the air and on all exposed surfaces. It also controls odours by the same process, eliminating the source, not masking it. Airsteril destroys bacteria, viruses, mould and fungi.

The Complete Air Purification Solution

HOW THE AS10 SYSTEM WORKS

Coverage 10m2-12m2

An Airsteril unit takes in contaminated air and purifies it using a unique combination of 5 technologies working in tandem:Internal – (UV) Germicidal Irradiation and Dual Wavebands work to eliminate micro-organismsTransmitting – Plasma Quatro, Super Oxide Ions and Triatomic Oxide actively seek and eliminate bacteria, viruses, mould, fungi and volatile organic compounds in the air and on all surfaces.

AS10 Dimensions 140mm (w) x 100mm (h) x 195mm (w) x 255mm (h) x 97.5mm (d)

OperationContinuous, indicated by blue lamp. Requires annual lamp change

Power Supply100-240V 9 watts (via 13a switched fused spur)

Weight1.5kg

ConstructionAnodised aluminium, solid extrusion

Set Up100-240V 13 watts (via 13a switched fuse Wall mounted Wall mounted at 4 points, easy access for marking with end caps removed

SERVICING MADE EASY

• Disconnect from power source• Remove unit from wall by lift off keyhole fixing screws• Unscrew and remove the bottom cap and remove cartridge• Remove the lamp. Do not touch the lamp. Use disposable gloves or

clean cloth• In a polluted environment, clean lamp with alcohol based solvent when

required• Internal cleaning is minimal due to thermal convection concept• Replace lamp. Please note, double click and push firmly home• Replace cover, ensure lamp is working and lamp sight is illuminated• Never operate unit without cover in place.• See manufacturer’s instructions

28DAY

OdourEliminationGuaranteed* Conditions Apply

For more information or to book an air quality check call: 01 6177963 RDI Systems Ltd Dublin & Cork T: Admin: 6-9 Trinity Street, Dublin 2 Tel: 01 6177963 | F: 01 6177964 | E: info@rdisystems.ie | W: www.rdisystems.ie