Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
ELIMINATOR LPDUMP BODIES
& HR SERIES HOISTS
ELIMINATTHE RUGBY ELIMINATOR LPThe Rugby Eliminator LP is the hardest working dump body in the landscape and light construction industries. When landscape and construction contractors need a productive, reliable and versatile body, they chose the Eliminator LP time after time. With a recently updated design, the Eliminator LP is better than ever, and now the lowest mount dump body in the industry.
The steel model now features a seamless, one-piece 10 gauge steel fl oor for optimum strength and durability. A lower mounting height improves stability on all models, while a full 9-foot inside diameter allows for full sheets of plywood or other materials. The updated Eliminator LP design also features front pillars that incorporate forward facing clearance lights positioned at a 45-degree angle at each corner. This design complies with FMVSS 108 safety standards and helps minimize glare.
Other industry leading design features include:
10 ga construction throughout on bodies with rigid sides, bodies with fold down sides have 12 ga sides
Fully boxed and tapered dirt-shedding top rail
Double-walled rigid sides with 6" vertical braces
Single-walled fold down sides with 6" vertical braces
Pockets for 6" side boards increase load capacity
Side design includes fully boxed 45° dirt shedding top rail and a 50° sloped bottom rail for a completely self-cleaning profi le
Front body’s seamless one-piece design features triple bend top rails for long-term durability
Stacked understructure consisting of 5" structural long members overlaid with 3" structural I-beam crossmembers spaced 16" (12" optional) apart
¼ cab shield with viewing window
Full height corner posts with rear surface sloped 6° aids in tailgate closing
Tailgate double walled panel design fabricated from 10 ga steel featuring fully boxed dirt-shedding top and bottom rails. Two vertical braces to provide additional strength and rigidity
2
Cab Shield PostsFull depth front pillars include easily locating cut-out for fast installation of cab shield insert. Makes all Eliminator LP cab shields interchangeable, helping to keep inventory low.
RUGBY MFGBUILT BETTER THE RUGBY WAY
CARBON STEEL RIGID 2-3 YARD BODY SPECIFICATIONS
Body Length 9'3" 11'3" 12'3"
Body Capacity (cubic yds) 2-3 2-3 2-3
Side Height (in) 12 12 12
Rear Height (in) 18 18 18
Body Weight (lbs) 1450 1660 1770
CARBON STEEL FOLD DOWN SIDE 2-3 YARD BODY SPECIFICATIONS
Body Length 9'3" 11'3" 12'3"
Body Capacity (cubic yds) 2-3 2-3 2-3
Side Height (in) 12 12 12
Rear Height (in) 18 18 18
Body Weight (lbs) 1475 1685 1795
StandardFeatures
3
Rugby’s patented and industry leadingEZ-LATCH™ (located on each side of body) allows for easy body access. The latch system is designed for quick opening and slam lock operation with a cam action to draw-in upper tailgate pins.
Low Mount HoistThe Eliminator LP’s lower mounting height improves the body’s overall stability. Actual mounting height 7 5⁄8".
Fold down sides feature a centrally located quick release lever that extends and retracts ¾" pins at each end using a solid linkage member. Weight-saving aluminum fold down sides are optional on steel bodies.
CARBON STEEL RIGID 3-4 YARD BODY SPECIFICATIONS
Body Length 9'3" 11'3" 12'3"
Body Capacity (cubic yds) 3-4 3-4 3-4
Side Height (in) 17 17 17
Rear Height (in) 23 23 23
Body Weight (lbs) 1550 1780 1890
CARBON STEEL FOLD DOWN SIDE 3-4 YARD BODY SPECIFICATIONS
Body Length 9'3" 11'3" 12'3"
Body Capacity (cubic yds) 3-4 3-4 3-4
Side Height (in) 17 17 17
Rear Height (in) 23 23 23
Body Weight (lbs) 1550 1780 1890
ELIMINATOR LP2-3 & 3-4 Yard Rigid & Fold Down Side Carbon Steel:
Cabshields (¼, ½, ¾, Full) Standard and Tall
7-gauge fl oor
Cross sills on 12" centers
Understructure Options: - Stacked - Crossmemberless
Aluminum Side Assemblies available on 3-4 yard Fold Down Side model
ELIMINATOR LP – BODY OPTIONS
Stainless steel dump bodies from Rugby are corrosion resistant and more durable than high tensile steel.
The stainless steel Eliminator LP is built with a one-piece fl oor, dirt shedding sides, a centrally located quick release lever, (fold down side models only) and the patented EZ-LATCH™ system. The unit is designed to provide years of service.
Vertical tailgate allows easy attachment of spreaders during winter.
4
STAINLESS STEEL LPONE TOUGH CHOICE
10 ga 201 stainless steel sides and ends standard (304 available on a special order basis)
One-piece 3⁄16" AR400 crossmemberless steel fl oor
Pockets for 6" side boards increase load capacity
One-piece sides with no vertical braces
Seamless one-piece front design with ¼ integrated cab shield with V-bend for added strength
STAINLESS STEEL RIGID 2-3 YARD BODY SPECIFICATIONS
Body Length 9'3" 11'3"
Body Capacity (cubic yds) 2-3 2-3
Side Height (in) 12 12
Rear Height (in) 18 18
Body Weight (lbs) 1450 1660
STAINLESS STEEL RIGID 3-4 YARD BODY SPECIFICATIONS
Body Length 9'3" 11'3"
Body Capacity (cubic yds) 3-4 3-4
Side Height (in) 17 17
Rear Height (in) 23 23
Body Weight (lbs) 1550 1780
STAINLESS STEEL FOLD DOWN SIDE 2-3 YARD BODY SPECIFICATIONS
Body Length 9'3" 11'3"
Body Capacity (cubic yds) 2-3 2-3
Side Height (in) 12 12
Rear Height (in) 18 18
Body Weight (lbs) 1475 1685
STAINLESS STEEL FOLD DOWN SIDE 3-4 YARD BODY SPECIFICATIONS
Body Length 9'3" 11'3"
Body Capacity (cubic yds) 3-4 3-4
Side Height (in) 17 17
Rear Height (in) 23 23
Body Weight (lbs) 1550 1780
Stainless Steel Eliminator LP – Rigid & Fold Down Sides
Cabshields (¼, ½, ¾, Full) Standard and Tall
304 SS in lieu of 201 SS (extra lead time)
Understructure Options: - Fully Stainless Steel - Interlaced - Crossmemberless
BODY OPTIONS
5
ALUMINUM LPHARD WORKING & GOOD LOOKINGTough, effi cient Rugby aluminum
Eliminator LP bodies weigh up to 50% less than traditional carbon steel and provide an exceptional strength to weight ratio! This means increased payload, improved fuel effi ciency, and corrosion resistance, in addition to lower maintenance costs and lower tire and brake costs.
The aluminum Eliminator LP body also features lightweight fold-down sides for easy access. Enjoy long lasting, durable aluminum bodies from Rugby and customize with a wide range of performance and appearance enhancing accessories.
3⁄16" 5052 Aluminum
¼" 5052 aluminum
RIGID 2-3 YARD BODY SPECIFICATIONS
Body Length 9'3" 11'3" 12'3"
Body Capacity (cubic yds) 2-3 2-3 2-3
Side Height (in) 12 12 12
Rear Height (in) 18 18 18
Body Weight (lbs) 813 915 1000
FOLD DOWN SIDE 2-3 YARD BODY SPECIFICATIONS
Body Length 9'3" 11'3" 12'3"
Body Capacity (cubic yds) 2-3 2-3 2-3
Side Height (in) 12 12 12
Rear Height (in) 18 18 18
Body Weight (lbs) 830 935 1010
RIGID 3-4 YARD BODY SPECIFICATIONS
Body Length 9'3" 11'3" 12'3"
Body Capacity (cubic yds) 3-4 3-4 3-4
Side Height (in) 17 17 17
Rear Height (in) 23 23 23
Body Weight (lbs) 867 980 1060
FOLD DOWN SIDE 3-4 YARD BODY SPECIFICATIONS
Body Length 9'3" 11'3" 12'3"
Body Capacity (cubic yds) 3-4 3-4 3-4
Side Height (in) 17 17 17
Rear Height (in) 23 23 23
Body Weight (lbs) 875 985 1060
Fold down aluminum sides are lightweight and easy to operate.
Aluminum LP – All ModelsCabshields (¼, ½, ¾, Full) Standard and Tall
Understructure Option: Interlaced
BODY OPTIONS
6
corporating the great look and ependable performance of the ugby Eliminator LP, the Eliminator-MD creases productivity by combining de and rear dump capabilities. perators enjoy pinpoint load acement and greater functionality in
ght jobsites with the Eliminator-MD.
Dumping direction is easily controlled with one lever and Rugby’s standard tailgate release controls both the rear and the side release. The Eliminator-MD includes Rugby’s patented EZ-LATCH™. Standard vertical side and tailgate braces along with the Eliminator’s sleek design offer the complete package to make your work truck stand out!
Increase productivity by combining side and rear dump capabilities with the Eliminator-MD.
° side dump angle
Multi-Directional dumping hoist specifi cally designed for MD Eliminator body.
ELIMINATOR MD EVEN MORE CAPABLE
ELIMINATOR-MD SPECIFICATIONS
Body Length 9' 9' 11' 11'
Body Capacity (yds) 2-3 3-4 2-3 3-4
Hoist Capacity Rear/Side (Tons)
9.6/10.9 9.6/10.9 9.6/8.6 9.6/8.6
Side Height 12.5" 17" 12.5" 17"
Tailgate Height 18.5" 23" 18.5" 23"
Eliminator MDCabshields (¼, ½, ¾, Full) Standard and Tall
BODY OPTIONS
for performance and durability. If you need a dependable long-lasting hoist, you need a Rugby!
7
HR series comes standard on a LP subframe that accommodates all domestic chassis.
NEED A LIFT
HOIST SPECIFICATION HR520 HR540 HR550
NTEA Class 20 40 40
Cyl. Bore & Stroke 5" x 16" 5" x 20" 5.5" x 20"
Chrome Cyl. Shaft 2" 2" 2 1⁄2"
Operating Pressure (psi) 3200 3200 3200
Hoist Weight w/subframe (lbs) 550 590 650
Hoist Capacity Ranges 6.9 - 13.8 tons
8 - 14 tons
8 - 16 tons
Truck Bodies & Equipment International, Inc.
Sold by:
Commitment to QualityToday’s marketplace demands quality products and competitive pricing. We work hard at Rugby to comply with your needs. Our reputation since 1969 has been one of quality production and we won’t change. You deserve and demand what we are committed to, the best.
ACCESSORIESA COMPLETE LINE UP
Tailgate Bumpers
Tarp HooksTarps Pintle and Receiver Hitch Plates
Solid Poly Sideboards for Board Pockets
Coal Chutes Poly Fenders
Other Accessories Available
Two Rung Ladders
Rugby Manufacturing is the world’s leading designer and manufacturer of Class 3-5 dump bodies, landscape bodies, platforms, hoists and related truck equipment & accessories. With more than 4 decades of experience, Rugby dump bodies and hoists are precision engineered and manufactured to perform! Rugby is committed to delivering product design innovation, superior quality and unrivaled service. And with each body and hoist backed by a 3-year warranty, nothing compares to Rugby!
For questions or to place an order, please contact HAWKEYE TRUCK EQUIPMENT at 515-289-1755 or 1-800-622-8223.