Upload
el-sayed-amer
View
108
Download
1
Embed Size (px)
Citation preview
Elsayed Mohamed Amer KhameesShobrasendy - Elsenblawein - Dakahleh - Egypt.
Mobile phone : +201008853790
Personality Identification
Name : Elsayed Mohamed Amer Khamees
Date of Birth : 8 / 8 / 1981
Nationality : Egyptian
Military Service : Relieved
Marital Status : Married
Mobile No. : +201008853790
Email : [email protected]
Adress : Naser city Cairo
Education B. Sc. Metallurgy Engineering–Petroleum & Mining Engineering Department
– Alazhar University
Grade : ( Very Good 82.33% )
Graduation year : 2005
Computer Background
AutoCAD : Good.
Word : Good
Excel : Good
Internet : Good
LanguageArabic: Mother langue
English: Good speaking and writing
Career Summery
More than 8 years of continuous experience in construction projects oil/gas storage
facilities ( fabrication, installation, inspections, examinations, testing maintenance and
demolishing )of onshore/offshore oil and gas plants
Onshore activities as construction and in service of oil / gas storage plants (piping
system, tanks, pressure vessels) , pipe lines ,Steel structure (platforms, pipe bridge,
handrails, ladders, ………… )
Offshore activities as construction and in service of (oil & gas) plants
(piping ,tanks ,Pressure vessel ,P/L),laying of submarine rigid pipelines (flow lines –
water injection lines -trunk lines) , spool pieces ,.
Worked as quality engineer, the responsibilities were about project quality assurance
including preparation of all quality documents in addition of supervision on the pre-
fabrication yard. This duties includes but not limited to preparation of Project quality
plan – Project ITP – Welding procedure and NDT procedures …etc , Welding /Welder 1 of 15
Elsayed Mohamed Amer KhameesShobrasendy - Elsenblawein - Dakahleh - Egypt.
Mobile phone : +201008853790
qualification and NDT procedures qualification.
Professional Certifications
- TWI ( CSWIP 3.1 CERTIFICATE NO.47303) , EXPIRY : 19/ Feb
/2020
I renew CSWIP, can you check on CSWIP site
http://www.cswip.com/verification/- ASNT Level II In Ultrasonic Testing ( UT) ) Expired date 17 /6 / 2017
- ASNT Level II In Radiographic Testing ( RT) Expired date 17 /6 / 2017
- ASNT Level II In Dye Penetrate Testing ( PT) Expired date 17 /6/ 2017
- ASNT Level II In Magnetic Particle Testing ( MT) Expired date 17/6 / 2017
Responsibility
During the employment; number quality positions was held, these positions varies in
role and duties. Here listed below the main responsibilities of these positions:
Preparation of PROJECT QUALITY DOUCUMENTS in accordance with
company specs.
fulfills requirements of applicable codes/standards & Client's specification ,
Such as: Project Quality Plan – Inspection and Test Plan – NDT Scope –
Welding Procedure – Approved Welder
List – NDT Procedures -Approved NDT Personnel - Equipments calibration
list...etc.
Verification of conformity and effectiveness of quality management system
through holding internal audits and external audits on sub-contractors
All duties of welding inspector (Prior-during-after) welding, review and control
all welding parameters as per approved WPS, welding consumables, heat
treatment , qualified welders , calibrated machines …etc .
Welding performance and welding procedure qualification in accordance with
the applicable specification, in addition; selection of the most suitable welding
process or the project, welding electrodes, current, shielding gases .Etc.
Interpret all NDT, PWHT, Hydrostatic/Pneumatic test results, and evaluate if
further evaluation is required.
Inspection (Physical inspection) of various material, with different product
shapes (i.e. , plates – pipes-flanges-bolts-valves).
NDT procedure writing with conformance to the applicable code and
specifications, and the qualification each NDT procedure.
Onshore and offshore pipeline,(erection, welding, NDT and coating)
2 of 15
Elsayed Mohamed Amer KhameesShobrasendy - Elsenblawein - Dakahleh - Egypt.
Mobile phone : +201008853790
(II) - ACTIVITIES :-
(1) According (QA/QC) SR. Welding engineer :-experience in- new constructions piping system fabrication , installation, maintenance
and demolishing of on shore and off shore oil and gas plants
Welding Inspection:-
- Preparation Inspection test plan of (ITP), Welding maps,.
- Material Receiving Report (MRR) according to Material Certificate &Owner
specification.
- Cover (NDT) Visual, Radiographic, Dye Pent rant, Magnetic Particle, Ultrasonic & PMI
(Positive Material Identification).
-Responsible for all the duties of the welding inspector before, during and after welding,
including:
-Welder Qualification with Conformance the applicable codes and standards
- Preparation and monitoring Welding Procedure Specification (WPS, PQR) preparation
and qualification WQT (welder qualification test.)
-As per Drawing & Specs related to Client and Applicable International codes.
-Supervise the preparation of destructive test samples, reviewing the calibration
certificates of the machines before testing and compare the results against the
specification requirements and applicable code.
-Pre-weld inspection & Verification that dimensions Fit-up and weld preparations are in
accordance with the engineering drawings
-Welding consumables identity Verification of corrections of welding consumables
(electrodes, filler wires, consumable inserts, gases, fluxes etc)
-Preheating Verification that preheat (where required) is in accordance with specified
procedures
-Post weld visual inspection and dimensional check of completed welds against
specification requirements and drawings
-Post weld heat treatment Verification that post weld heat treatment has been
conducted in accordance with specification requirements ( PWHT and Hardness Leak
(Pressure Vacuum, & Pneumatic) Test.
Heat treatment of all types of pipes with different programs and materials
-Destructive tests
3 of 15
Elsayed Mohamed Amer KhameesShobrasendy - Elsenblawein - Dakahleh - Egypt.
Mobile phone : +201008853790
(2)According to (ASNT-TC-1A):–. Non - Destructive Examination Performance, interpretation and evaluation of the
results for the following Non-Destructive Examination :
Ultrasonic Examination:-
- Ultrasonic test (thickness measurements).
-UT Procedure preparation and report writing with conformance of the applicable code
and specification
-Thickness Measurements and lamination Detection using A-Scan equipments such as
(Kraut Kramer USM 35 & USM 25) and Resonance Digital equipments (Kraut Kramer
DM4)
-Dealing with different UT (Calibration and DAC) Blocks such as IIW V1, IIW V2,
NAVSHIPS, IOW, Step, ASME & DNV Base Metal DAC Block …etc
Radiographic Examination :-
-Interpretation of radiographic films.
-RT Procedure preparation and report writing with conformance of the applicable code
and specification
-Radiographic film interpretation for all configurations welding, casting and forging
-Shielding design and shooting area safety
-Deal with all RT safety equipments including surveyors, Bleeper’s, dosimeters …etc
-Magnetic Particle Inspection (MPI):-
-MT Procedure preparation and report writing with conformance of the applicable code
and specification
-Test performance for both visible and florescent dye
-Liquid Penetrate Test (LPT) :-
- LPT performance and report writing
-Visual Examination :-
- VT performance and report writing
- Capable to use all the visual testing tools such as HI-LO gauge, fillet gauge, Camber
age universe
-Material inspection:-
-Piping material like pips, fittings, flanges, Gaskets covering CS, SS, low temp. Steel,
duplex, income, and low alloy steel.
4 of 15
Elsayed Mohamed Amer KhameesShobrasendy - Elsenblawein - Dakahleh - Egypt.
Mobile phone : +201008853790
-valves (gate, globe, ball, check, butterfly, safety, etc.)
-Welding electrodes and consumables
-piping (welded and seamless)
Inspection included 100% visual, dimensional at random, and verification of MTC and
inspection report to check for complains with
Material specification and client specification.
Visual inspection also includes traceability check by correlation of material marks
against MTC and test report.
Conversant with ASTM, ASME, BS, API specification and standards
All weld gauge etc.
Experience
Feb 2012 to Until nowAt Agiba company
Carried out 2 heat treater (pressure vessel U stamp) 4m diameter and 20m length (at petrojet location)
Carried out gas plant and 5 pipe line 10", 8", 6", 4" (30KM) at Meleha site
Zetco company Installed 5 tanks and connection with well head Carried out 8" pipe line 7(KM) and connection with tanks
and well head Project work in maintainance of seperators and piping offshore and onshore platform GUPCO
Carried out 3 vessel at petrojet location Received maintenance 10 scrubber 1st and 2nd and 3rd stage
scrubber Carried out maintenance of 4 vessel at Ramadan 6 (off
shore) Carried out shutdown M1 Carried out shutdown morgan water flood Carried out maintenance of for sep Ramadan 6 Carried out new oil pipe line 18" FM end offshore M1 to
tanks Carried out any emergence leaks in pipes Out of gupco carry out oil pipe line 8" 6.5 km from wells
area to petrobel area
Dec. 2010 to JAN 2012
5 of 15
Elsayed Mohamed Amer KhameesShobrasendy - Elsenblawein - Dakahleh - Egypt.
Mobile phone : +201008853790
Project : Rehabilitation projects ( Morgan 36 and October ) Company: GUPCOTitle : Q C welding engineer Activities :
carry out visual inspection on piping and valves and flanges according to as luilt
and P &ID ( OFF SHORE)
carry out reports and description the defects in lines
Determination the parts which replacement.
Sep. 2010 to Dec. 2011.Project: Maximization of C2 & C3 from western desert gas fieldCompany: GASCOTitle : wilding inspector Activities :
Witness Welding procedure Specifications
Witness Welder procedure qualification
Witness welder’s performance
Review RT films.
Witness of Valve testing at testing Facilities- Ball valves and gate valves
Following Up to heat treatment (stress Relief )
Jan. 2010 to Aug.2010 Project : 1.East Baharia Piping General Arrangement (shipping Station & Water Flood Facility)2. Heba Ridge Piping General Arrangement (shipping Station & Water Flood Facility)
3.Oil , Injector and Water Source Well Head and Flow Line
4.Pipe Line 8” Trunk Line 7.5KM
Company: Qarun Petroleum Co.
Location: West Desert.
Title : Welding Inspector
Activities;
Witness Welding procedure Specifications
Witness Welder procedure qualification
Witness welder’s performance
Review RT films.
Oil, Injector and Water Source Well Head and Flow Line Connection.
Valve rooms fabrication and erection.
Witness for hydrostatic testing activities (cleaning, gauging, hydrostatic testing).
Jan. 2009 to Nov. 2009
Project: Assuit / Aswan Gas Pipe line 32",30" 500 Km. , 14 valve rooms,
6 of 15
Elsayed Mohamed Amer KhameesShobrasendy - Elsenblawein - Dakahleh - Egypt.
Mobile phone : +201008853790
Company : Gasco
Location: Assuit / Aswan
Title: Welding Inspector
Activities ;
Witness Welding procedure Specifications
Witness Welder procedure qualification
Witness welder’s performance
Review RT films.
Coating Inspector.
Crossings (roads, canals, high ways, construction).
Witness for laying.
Valve rooms fabrication and erection.
Pipeline Tie-Ins and HDD.
Witness for hydrostatic testing activities (cleaning, gauging, hydrostatic testing).
Sep. 2008 toDec.2008
Project: 2 water tanks 2000 bbi and Gas Pipe line 10'' 30 KM
Company : Qarun Petroleum Co
Location: West Desert
Items : Gas Pipe line 10 , 3 valve rooms & Water Tanks Construction
Title : Welding Inspector
Activities ;
Witness Welding procedure Specifications
Witness Welder procedure qualification
Witness welder’s performance
Review RT films.
Dimensional verification according drawing.
Witness for hydrostatic testing activities (cleaning, gauging, hydrostatic testing).
Jun 2008 to Aug. 2008
Project: Belayim Petroleum com (Petrobel) maintenance Gas Piping & Tanks
maintenance.
Company : Belayim Petroleum com (Petrobel)
Location: port said
Title: Welding Inspector
Activities;
7 of 15
Elsayed Mohamed Amer KhameesShobrasendy - Elsenblawein - Dakahleh - Egypt.
Mobile phone : +201008853790
Witness Welding procedure Specifications
Witness Welder procedure qualification
Witness welder’s performance
Review RT films
Check materials and review material certificate.
Jan. 2007 to May. 2008
Project: D S D Steel Structure
Company : S G S & D S D
Location: Belbeas Sharkeh
Title: Materials Engineer- Construction& Q.C Engineer – Welding Inspector
Activities;
.Reviewing Of Projects materials marking
Reviewing certificates according marking
Following Up to machine Cutting C N C
Following Up to Built Up section
.Reviewing Of drawing & welding Symbols & W.P.S...
carry out welding maps
Jan. 2006 to Dec. 2006
Project : Pipes & Fitting Greater Cairo Foundries (GCF)
Company : Greater Cairo Foundries (GCF
Location : Belbeas Sharkeh
Title: Q.C Engineer – Metallurgical Engineer
Activities ;
Reviewing Chemicals compositions of casting before & After casting
Casting of ductile cast iron pipes & valves & Flanges & other foundries
Casting of Gray cast iron valves & other foundries
Casting of Stainless steel valves & other foundries
Following Up to mechanicals properties of samples after casting.
8 of 15
Elsayed Mohamed Amer KhameesShobrasendy - Elsenblawein - Dakahleh - Egypt.
Mobile phone : +201008853790
9 of 15
Elsayed Mohamed Amer KhameesShobrasendy - Elsenblawein - Dakahleh - Egypt.
Mobile phone : +201008853790
10 of 15
Elsayed Mohamed Amer KhameesShobrasendy - Elsenblawein - Dakahleh - Egypt.
Mobile phone : +201008853790
11 of 15
Elsayed Mohamed Amer KhameesShobrasendy - Elsenblawein - Dakahleh - Egypt.
Mobile phone : +201008853790
12 of 15
Elsayed Mohamed Amer KhameesShobrasendy - Elsenblawein - Dakahleh - Egypt.
Mobile phone : +201008853790
13 of 15
Elsayed Mohamed Amer KhameesShobrasendy - Elsenblawein - Dakahleh - Egypt.
Mobile phone : +201008853790
14 of 15
Elsayed Mohamed Amer KhameesShobrasendy - Elsenblawein - Dakahleh - Egypt.
Mobile phone : +201008853790
15 of 15