2
This is a high performance antenna designed for embedded applications. It is ideal for GPS handhelds, PDAs and tracking devices. The compact size and lightweight features make it perfect for various commercial and industrial applications. With a low noise figure and high-linearity LNA, this antenna is the ideal solution for the most extreme and demanding applications where reliable satellite reception and high accuracy are required. The interface connector is available in U.FL or other. Embedded Active GPS Antenna MA TENA ANTENNA INNOVATIONS COMPANY ® Maxtena Inc. 7500 Old Georgetown Road, Suite 750 Bethesda, MD 20814 1-877-629-8362 [email protected] Description dimensions are in mm MIA-15 15 mm Parameter Design Specifications Frequency 1575.42 MHz Polarization RHCP Antenna element peak gain 4 dBic DC voltage 2.5 to 3.5 V DC current 4 mA @ 2.5 V / 7 mA @ 3.5 V Bandwidth (-1dB) 10 MHz LNA network gain 16 dB @ 2.5 V / 16 dB @ 5 V Axial ratio 1.5 dB (typical) / 2.5 dB (max) VSWR 1.3 (max) Impedance 50 Ohm Operating temp. from -40°C to 85°C Electrical Specifications Features Applications Mechanical Specifications Realized gain plot www.maxtena.com Measured at 1575.42 MHz on a 76mmX76mm ground plane (E plane, 2.5 V) Ÿ GPS L1 frequency Ÿ Active LNA circuitry Ÿ Custom connector options Ÿ Low current Parameter Design Specifications RF connector U.FL or other Image does not reflect the actual size of the antenna 76X76 mm ground plane Ÿ Vehicle & fleet tracking Ÿ Embedded applications Ÿ Military & security Ÿ Asset tracking Ÿ PDAs and laptops Ÿ Oil & gas industries Ÿ Navigation devices Ÿ Law enforcement Ÿ LBS & M2M applications

Embedded Active GPS Antenna - 15mm - Maxtena

  • Upload
    maxtena

  • View
    13

  • Download
    1

Embed Size (px)

DESCRIPTION

This is a high performance antenna designed for embedded applications. It isideal for GPS handhelds, PDAs and tracking devices. The compact size andlightweight features make it perfect for various commercial and industrialapplications. With a low noise figure and high-linearity LNA, this antenna is theideal solution for the most extreme and demanding applications where reliablesatellite reception and high accuracy are required. The interface connector isavailable in U.FL or other.

Citation preview

Page 1: Embedded Active GPS Antenna - 15mm - Maxtena

This is a high performance antenna designed for embedded applications. It is ideal for GPS handhelds, PDAs and tracking devices. The compact size and lightweight features make it perfect for various commercial and industrial applications. With a low noise figure and high-linearity LNA, this antenna is the ideal solution for the most extreme and demanding applications where reliable satellite reception and high accuracy are required. The interface connector is available in U.FL or other.

Embedded Active GPS Antenna

MA TENAANTENNA INNOVATIONS COMPANY

®

Maxtena Inc.7500 Old Georgetown Road, Suite 750Bethesda, MD [email protected]

Description

dimensions are in mm

MIA-15

15 mm

Parameter Design Specifications

Frequency 1575.42 MHz

Polarization RHCP

Antenna element peak gain 4 dBic

DC voltage 2.5 to 3.5 V

DC current 4 mA @ 2.5 V / 7 mA @ 3.5 V

Bandwidth (-1dB) 10 MHz

LNA network gain 16 dB @ 2.5 V / 16 dB @ 5 V

Axial ratio 1.5 dB (typical) / 2.5 dB (max)

VSWR 1.3 (max)

Impedance 50 Ohm

Operating temp. from -40°C to 85°C

Electrical Specifications

Features

Applications

Mechanical Specifications

Realized gain plot

www.maxtena.com

Measured at 1575.42 MHz on a 76mmX76mm ground plane (E plane, 2.5 V)

Ÿ GPS L1 frequency

Ÿ Active LNA circuitry

Ÿ Custom connector options

Ÿ Low currentParameter Design Specifications

RF connector U.FL or other

Image does not reflect the actual size of the antenna

76X76 mm ground plane

Ÿ Vehicle & fleet tracking

Ÿ Embedded applications

Ÿ Military & security

Ÿ Asset tracking

Ÿ PDAs and laptops

Ÿ Oil & gas industries

Ÿ Navigation devices

Ÿ Law enforcement

Ÿ LBS & M2M applications

Page 2: Embedded Active GPS Antenna - 15mm - Maxtena

MA TENAANTENNA INNOVATIONS COMPANY

®

Maxtena Inc.7500 Old Georgetown Road, Suite 750Bethesda, MD [email protected]

www.maxtena.com

LNA network characteristics

Parameter Design Specifications

Frequency 1575.42 MHz

DC voltage 2.5 V to 3.5 V

DC current 4 mA @ 2.5 V / 7 mA @ 3.5 V

Noise figure 1.8 dB (max)

VSWR 1.3 (max)

Gain 16 dB @ 2.5 V / 16 dB @ 3.5 V

Input P1dB -10 dBm @ 2.5 V / -12 dBm @ 3.5 V

Parameter Design Specifications

Frequency 1575.42 MHz

Polarization RHCP

Antenna element gain -3 dBic

Efficiency 35%

Bandwidth (-1dB) 5 MHz

Antenna element characteristics15X15 mm ground plane

Parameter Design Specifications

Frequency 1575.42 MHz

Polarization RHCP

Antenna element gain 4 dBic

Efficiency 70%

Bandwidth (-1dB) 10 MHz

Antenna element characteristics76X76 mm ground plane

-25

-20

-15

-10

-5

0

-10

-5

0

5

10

15

1560 1565 1570 1575 1580 1585 1590 1595 1600

f (MHz)

Pa

ssiv

eR

HC

Pg

ain

(dB

ic)

Activ

eR

HC

Pg

ain

(dB

ic)

-15

-10

-5

0

5

0

5

10

15

20

1560 1565 1570 1575 1580 1585 1590 1595 1600

f (MHz)

Pa

ssiv

eR

HC

Pg

ain

(dB

ic)

Activ

eR

HC

Pg

ain

(dB

ic)

Active/Passive gain vs. frequency15X15 mm ground plane

Active/Passive gain vs. frequency76X76 mm ground plane

-30

-20

-10

0

10

20

30

1000 1100 1200 1300 1400 1500 1600 1700

f (GHz)

Total system wide band response @ 2.5 V76X76 mm ground plane

Embedded Active GPS Antenna

MIA-15

15 mm