EMERGENCY | ONE-LEDTM OMNI-LED DSTTM | LED DALI …... 3 TECHNICAL INFORMATION LED lamp output - Shaded area indicates typical forward voltage (Vf) vs forward current (If) expected

Features> Fully compliant DALI, self-contained emergency lighting device (type 1)

> Intelligent, automatic self-test scheduling for non-DALI applications

> Integralstatus/identificationsounderwithuser-override

> Input for optional low-voltageemergencytestinitiationswitch

> Bi-colourred/greenstatusindicatorLEDwith500mm leads supplied as standard > User-selectable 1 or 3 hour autonomy

> Emergencyoutputpower(Typical):1.5W(2-cell),3W(3-cell), 4W(55V4-cell),3.5W(90V4-cell)and3W(200V4-cell)

> 3-poleswitchingprovidesfullisolationoflampconnectionsandmainsdriver’spowersupplyduringemergencyoperation(Compatiblewithmost driver types up to 2A)

> Constant-currentchargerwithreverse polarity and short- circuit protection

> Designed and manufactured in Great Britain

> Complieswith:EN60598-2-22,EN61347-1,EN61347-2-7,EN61347-2-13,EN62034,EN62386,EN55015,EN61000-3-2,EN61547

www.one-lux.com 1

Common Technical Data

InputSupplyVoltage 230V+/-10%

Supply Frequency 50/60Hz

OutputVoltageoftheRange 3-200Vdc

MaximumTCPoint 70°C(60°Cfor4Cellversions)

AmbientTemperatureRange 0°C-50°C(40°Cfor4Cellversions)

BatteryChargeTime 24Hours

EarthLeakageCurrent <0.5mA

IPRating IP20

Weight 90g

Model NumberLED Voltage

RangeNumber of

Battery Cells

OL12/2/M3/DST 3-12V 2

OL55/3/M3/DST 9-55V 3

OL55/4/M3/DST 9-55V 4

OL90/4/M3/DST 55-90V 4

OL200/4/M3/DST 90-200V 4

OL12andOL55productsareSELVcompliant.Allversionssuppliedinstandardpackquantitiesof50weighing5.0Kg

AccessoriesSeepages5to7forourrangeofbatteriesandbatteryaccessories.

Productspecificationsmaybesubjecttochangewithoutpriornotice.

Issue_6Aug2018

Product descriptionOmni-LEDDSTTMisarangeofDALISelf-Testemergencylightingconversionmoduleshousedinacompactlow-profileenclosure,andsuitableforusewithmaintained,self-containedLEDluminaires.Theirconstant-powerdrivertechnologyhasaSELVisolatedoutputandavailableinarangefrom3Vto200VDC.TheywillrunalmostanyLEDlamporarray(includingsomeGU10andLineartubes),so making it easy to produce a self-testing and addressable, emergencyversionofyourexistingLEDluminairewithouttheneedfor separate ‘emergency’ LEDs or connectors. Theyareavailablein2,3and4cellversionsforusewithNiCdorNiMHbatteries.

EMERGENCY | ONE-LEDTM OMNI-LED DSTTM | LED DALI EMERGENCY CONVERSION MODULE WITH SELF-TEST

www.one-lux.com 2

Model NumberInput Characteristics - Charging Mode

Duration selection CircuitWatts* InputCurrent InrushCurrent PowerFactor

OL12/2/M3/DST1Hour 2.8W 0.03A 5Apk 0.45

3Hour 3W 0.03A 5Apk 0.45

OL55/3/M3/DST1Hour 2.8W 0.03A 5Apk 0.44

3Hour 4.2W 0.04A 5Apk 0.47

OL55/4/M3/DST,OL90/4/M3/DST,OL200/4/M3/DST

1Hour 3.4W 0.04A 5Apk 0.45

3Hour 4.8W 0.05A 5Apk 0.45

TECHNICAL INFORMATION

*ThisfiguremaybeusedforLENI‘ParasiticPower’calculations.

Model Number

Battery & Emergency Output Characteristics

Duration selection Battery Type

NumberofBatteryCells

BatteryVolts(Range) RatedCapacity DDPVoltage ChargeCurrent

(Constant)DischargeCurrentNominal/Range

LEDVoltageRange

TypicalOutputPower**

Uout Max (openCircuit)

OL12/2/M3/DST1 hour

NiCd/NiMH

2 2-2.8V 1.6Ah 1.8V(min) 75-95mA 1.05A/(0.8-1.2A) 3-12V 1.5W 12V

3 hours 2 2-2.8V 4Ah 1.8V(min) 140-260mA 1.05A/(0.8-1.2A) 3-12V 1.5W 12V

OL55/3/M3/DST1 hour 3 3-4.2V 1.6Ah 2.5V(min) 75-95mA 1.05A/(0.8-1.2A) 9-55V 3W 60V

3 hours 3 3-4.2V 4Ah 2.5V(min) 140-260mA 1.05A/(0.8-1.2A) 9-55V 3W 60V



OL90/4/M3/DST1 hour 4 4-5.6V 1.6Ah 3.5V(min) 75-95mA 1.05A/(0.8-1.2A) 55-90V 3.5W 100V

3 hours 4 4-5.6V 4Ah 3.5V(min) 140-260mA 1.05A/(0.8-1.2A) 55-90V 3.5W 100V




**Seegraphsonpages3and4foroutputcharacteristics.

www.one-lux.com 3


LED lamp output - Shaded area indicates typical forward voltage (Vf ) vs forward current (If ) expected throughout discharge duration.

4W - OL55/4/DST

0

100

200

300

400

500

600

3 6 8 11 14

LED

cur

rent

[mA

]

LED voltage [V]

1.5W - OL12/2/DST3W - OL55/3/DST

050

100150200250300350400450500550600

9 11 14 17 19 22 25 27 30 33 35 38 41 43 46 48 51 54

LED

curr

ent [

mA]

LED voltage [V]

050

100150200250300350400450500550600

9 11 14 17 19 22 25 27 30 33 35 38 41 43 46 48 51 54

LED

curr

ent [

mA]

LED voltage [V]


www.one-lux.com 4



LED lamp output - Shaded area indicates typical forward voltage (Vf ) vs forward current (If ) expected throughout discharge duration.

30

40

50

60

70

80

55 60 65 70 75 79.5 84.7 89.8

LED

curre

nt [m

A]

LED voltage [V]

3.5W - OL90/4/DST

0

10

20

30

40

50

60

70

80

90 101.3 109.2 117 124.8 132.6 140.4 148.1 155.9 163.7 171.4 179.1 186.8 200

LED

curre

nt [m

A]

LED voltage [V]

3.0W - OL200/4/DST

www.one-lux.com 5

Model Number

NiCd Batteries NiMH Batteries

Duration selection NCD24SS NCD24BS NCD34SS NCD34BS NCD44SS NCD44BS NCD216SS NCD316SS NCD416SS NMH24SS NMH34SS NMH44SS

ApplicableEndCaps(2 required per battery)

E - E - E - E/SubC E/SubC E/SubC E/18700 E/18700 E/18700

OL12/2/M3/DST

1Hour 4

3Hour 4 4 4

OL55/3/M3/DST

1Hour 4

3Hour 4 4 4

OL55/4/M3/DST,OL90/4/M3/DST,OL200/4/M3/DST

1Hour 4

3Hour 4 4 4

BATTERY AND END CAP ACCESSORY ASSIGNMENT

Applicable Battery Packs and End Caps to OMNI-LEDTM models


Product description> Endcapssuitableforusewith‘stick’Dsizebatteries> Endcapsuitableforusewith‘stick’SubCbatteries> Endcapsuitableforusewith‘stick’18700NickelMetalHydridebatteries

Properties> Providesaconvenientandsecuremountingoptionforcylindricalbatteries> MouldedinUL94-V0ratedplastic> ‘E’versionoffersslidetogetherfeaturetoproducesecureside-bysideconfiguration> Linkwiresavailableseparately> Slotted for tag connection or outlet for pre-soldered connections

BATTERY END CAPS NiCd Batteries - Ordering Information

ProductCode E E/Slotted E/18700 E/SubC

FixingCenterswhenfitted

Battery Length (L) +20mm




Maximum Lengthwhen

fitted





www.one-lux.com 6

ACCESSORIES | NICKEL CADMIUM (NiCd) BATTERIES

Product description> HightemperatureNickelCadmiumbatteries

for Emergency Lighting use > SuitableforusewithallOne-LUXproducts> 1-yearwarranty

Properties> Ratedforcontinuousoperationat55°Cand

meets the 4 year design life as per Annex A of EN60598-2-22

> ComplieswithIEC61951-1> Suppliedwithsuitableconnectors> Availableincustomconfigurations> 4Ah‘D’sizecells> Other capacities available> Refertobatterydatasheetforfurther

information


AbsoluteMaximumTemperature 70˚C

MaximumContinuousTemperature 55˚C

MinimumAmbientTemperature 5˚C

ChargeRequirements C/20for24hoursConstantCurrent(CC)

Storage 0-25˚Cfor12months

Disposal at registered treatment facility only

Table of Dimensions

Dimensions NCD24SS NCD24BS NCD34SS NCD34BS NCD44SS NCD44BS NCD216SS NCD316SS NCD416SS

Length (L) 116mm 68mm 175mm 102mm 234mm 136mm 86mm 131mm 175mm

Width(W) 34mm 63mm 34mm 63mm 34mm 63mm 23mm 23mm 23mm

Height(H) 34mm 36mm 34mm 36mm 34mm 36mm 23mm 23mm 23mm

Fixing (l) n/a 32mm 64mm

Fixing(w) 40mm 40mm 40mm

IECCellSize ‘D’ ‘Sub-C’(SC/Cs)

NiCd Cable Assemblies Connector Type Wire Length Connector Dimensions

CAS031requiredwithpacks(BS)(Sold separately)

MiniJSTplugtoAmp ‘mate-n-lok’ (male)

250mm N/A N/A

CAS020requiredwithsticks(SS) (Sold separately)

MiniJSTplugtoRed&Blackwireswithsockets

500mm 4.8mmx0.8mm 6.3mmx0.8mm

CAS012-linkwire (Sold separately)

Whitewire (female/female) 100mm 6.3mmx0.8mm(positive)

4.8mmx0.8mm(negative)

NiCd Batteries - Ordering Information

ProductCode NCD24SS NCD34SS NCD34BS NCD44SS NCD44BS NCD216SS NCD316SS NCD416SS

Box Quantity 40 30 30 20 22 140 60 60

Weight 11kg 12kg 13kg 10.8kg 12kg 14.5kg 10kg 12kg

Positive Negative

Length (L)

Height(H)

Length (L)

Fixing (l)

Fixing(w)

Height(H)

Width(W)


www.one-lux.com 7

ACCESSORIES | NICKEL METAL HYDRIDE (NiMH) BATTERIES

Product description> HightemperatureNickelMetalHydride

batteries for emergency lighting use > SuitableforusewithallOne-LUXproducts> 1-yearwarranty

Properties> Ratedforcontinuousoperationat50°Cand

meets the 4 year design life as per Annex A of EN60598-2-22

> ComplieswithIEC61951-2> Suppliedwithsuitableconnectors> Availableincustomconfigurations> 4Ah‘18700’sizecells> Other capacities available> Refertobatterydatasheetforfurther

information


AbsoluteMaximumTemperature 70˚C

MaximumContinuousTemperature 50˚C

MinimumAmbientTemperature 5˚C

ChargeRequirements C/20for24hoursConstantCurrent(CC)

Storage 0-25˚Cfor6months

Disposal at registered treatment facility only

Table of Dimensions

Dimensions NMH24SS NMH34SS NMH44SS

Length (L) 140.5mm 214.5mm 284mm

Diameter (D) 20mm 20mm 20mm

IECCellSize ‘18700’

NiMH Cable Assemblies Connector Type Wire Length Connector Dimensions

CAS024/JST-wireset (Sold separately)

MiniJSTplugtoRed&Blackwireswithspade&socket 700mm Red4mm(socket)

Black3.5mm(spade)

CAS070-linkwire(Sold separately) Blackwire(male/female) 300mm 3.5mm&4mm(spade&

socket)

NiMH Batteries - Ordering Information

ProductCode NMH24SS NMH34SS NMH44SS

Box Quantity 50 45 54

Weight 7kg 11kg 14.5kg

Length (L)

Diameter (D)

NickelMetalHydride(Ni-MH)


www.one-lux.com 8

DisclaimersOmni-LEDDSTTM module and its associated accessory products have been manufacturedanddesignedtocomplywiththerequirementsofEN60598-2-22in addition to the standards detailed on page 1 of this document. Operation beyondtheparametersspecifiedinthisdocumentandtheassociatedstandards may result in reduced performance and ultimate premature failure,withthewarrantymadevoid.ItistheusersresponsibilitytoensurefullcompatibilityoftheOmni-LEDDSTproductfortheintendedapplicationand for compliance of the emergency conversion to relevant Standards. Thespecifier/systemdesignershouldfollowtheluminairemanufacturer’sspecificationsandbeawareoftheenvironmenttowhichtheluminaireandthesecomponentsareusedandensurecompatibilityofOne-LUXproductswithothercomponentsinthelighting/DALIsystem.Installationshouldbeinlinewiththefollowingguides.PleasecontactourTechnicaldepartmentifyouare in any doubt.

Precautions Omni-LEDDSTTMmoduleshouldbeinstalledasperthefollowingguidelines,electric shock or damage to the product may result if incorrectly installed. Theluminaireshouldbeinstalledbyaqualifiedandcompetentelectrician.If the luminaire is to be mounted in an external location, consider the battery astemperaturesbelow0°Cmaybefrequentincoldmonths.Inthiscase,thedesignlifeof4yearswillbecompromisedandmorefrequentbatteryreplacementsmaybeneeded.Likewise,iftheluminaireissituatedinahotenvironmentwherethetemperatureismaintainedat25°Corabove,orsitednexttolargepanesofglassinwhichcaseitmaybeexposedtothermalmagnification.ItisrecommendedthatIP65luminairesareavoidedforuseininternalapplications as undue thermal stress may result.

Installation notesWirePreparation:maximumstriplength10mm(recommended6mm)Min/maxConductorsizes:0.5-1.5mm2.

BesteffortshouldbemadetokeeptheOmni-LEDDSTTM module and battery awayfromdirectsourcesofheat,i.e.mainsLEDdriversandLEDlamps.AvoidobstructingairflowaroundthesidesoftheOmni-LEDDSTTM module and other electronicproducts.Allowaclearanceof10mmormorewhereverpossible.

LampConnectionsshouldbekeptasshortaspossibleandundernocircumstances exceed 1m for self-contained luminaires. TheOmni-LEDDSTTMmoduleshouldbesecuredusingbothfixingpointsandtheuseofM4x6mmscrewsarerecommendedformostapplications.

Test Switch input (Optional accessory)TheOmni-LEDDSTTM module offers the facility for the user to perform a multiplefunctionswithaswitchconnectedtothe‘TESTSWITCH’input.Anon-latchingpush-to-makeswitchshouldbeusedasshowninthewiringdiagramsonPage11.Seebelowfordetailsofuse.

EMCconsiderations:Mainsinputconnectionsshouldbeasfarfromthelampleadsaspossibleandnoideallylessthan10cm.Mainsinputwiresshouldbeas short as possible and run direct from input terminations to the Omni-LED DSTTM product; they should not run alongside the case.

OtherEMCtips:> Keepthelampwiresraisedoffanyearthedmetalwork> Twistmainsleadstogetherwhen‘looping’or‘throughwiring’Theswitchedandun-switchedlivesmaybejoinedtogetherforcontinuousoperation(un-switched)applications.TheOmni-LEDDSTTMmoduleprovidesSELVreinforcedinsulationbetweenthe mains supply and battery charging circuit and employs self-resetting

INSTALLATION


protectionagainstshort-circuitofbatteryterminals.Normalchargingwillresumeautomaticallyonceafaultisremoved.Themainssupplyshouldalwaysbedisconnectedwhenservicingtheluminaire.

Ifotherdevicesareconnectedtotheun-switchedsupply,pleasebeawarethattomaintaincompliancewithEN60598-2-22thatineventofitsfailureitwillnotaffectotherdevicesonthesamecircuit.Inthiscasewerecommendtheuseofseparate fused terminal blocks to each device.

InternalfusesusedwithinOmni-LEDDSTTM module product are not user serviceable.

CAUTION! Ensure the jumper setting located in the product lid is configured correctly for the intended application and the associated battery is of the correct capacity. See battery selection guide on page 5.

Autonomy Selection Information

Emergency Duration Required Jumper Setting

3Hours(DefaultSetting)

1Hour

Test Switch Information

Function Test Switch Action

Disable Sounder Pressandholdforlongerthan5seconds(Sounderbleepsonceforconfirmation)

Enable Sounder Pressandholdforlongerthan5seconds(Sounderbleepstwiceforconfirmation)

StartaFunctionTest* Pressandrelease2timeswithin5seconds

Confirmphysicalselection Pressonceduringphysicalselectionmodeinitiated by DALI system

StopIdentification Pressonceduringidentificationmodeto exit.


www.one-lux.com 9

INSTALLATION & OPERATION

Automatic TestingOncecommissioned,theOmni-LEDDSTTMmodulewillautomaticallydetermineifitisbeingusedinStandaloneSelf-TestmodeorconnectedtoaDALInetwork.

IfStandaloneSelf-Testisdetected,itwillestablishrandomiseddelaytimestoensurethenextscheduledtestsdonotcoincidewiththesametestofadjacentluminaires.(Seetablebelowfordetailsof‘TestDelayTime’ranges).Subsequentroutinetestingwillthentakeplaceaccordingtothe‘TestInterval’timesdetailedinthetablebelow.Whenascheduledtestisdue,theOmni-LEDDSTTMmodulewillcheckstatusofthe‘ControlSwitchLiveLin’totryanddetermineifthelampisalreadyinuseandavoiddisruptiontotheuserforupto36hourswhereverpossible.

IftheOmni-LEDDSTTMmoduledetectsitisinstalledonaDALInetwork,itwillconfigureitselfaccordingtothedefaultDALIspecification. (Seetablebelow).It is important to note that in DALI mode, randomisation will not be set and it will await test delay times to be configured by the DALI master.

IntheeventoflossofcommunicationwiththeDALImaster,automatictestingwillrevertbacktotheSelf-Test‘TestIntervals’,but‘TestDelayTimes’willremainasconfiguredbytheDALImaster.

Automatic Testing Information

Test Type Mode Duration Test Delay time Test Interval / Occurrence Notes

CommissioningTestSelf-Test 1or3Hours* 24Hours Once* ThemodulewillcarryoutaDurationTest24hoursafterinitialpowerup.*Thistestcyclewillberepeatedifun-successfull

DALI 1or3Hours* 24Hours Once* ThemodulewillcarryoutaDurationTest24hoursafterinitialpowerup.*Thistestcyclewillberepeatedifun-successfull

FunctionTestSelf-Test 20Seconds 1-15Days Every28Days -

DALI 20Seconds 0 Every7Days Caution!FactorydefaultofzerotestdelaytimeissetforDALIMode

DurationTestSelf-Test 1or3Hours* 1-51Weeks Every51Weeks Themodulechecksifthelampisinusebeforeinitiatingatesttoavoiddisruption.Maximumtestdelayis36hours

DALI 1or3Hours* 0 Every52Weeks Caution!FactorydefaultofzerotestdelaytimeissetforDALIMode

Commissioning:Oncetheluminairehasbeeninstalledandavailabilityoftheun-switchedsupply is deemed stable, connect the battery, then apply mains power to begin the commissioning process.Afterapplyingpower,theOmni-LEDDSTTMindicatorLEDwillflashredthengreenandthemodulewillcarryoutaninitial24hourchargeandathenafullDurationTest.Oncethiscommissioningtestiscomplete,afurther24hourswillbeneededtorechargethe battery before normal use. Thedurationofthetestwillbedeterminedbytheconfigurationlink,whichisaccessiblethroughtheenclosurelid.(Seepage8fordetails).Caution should be taken to ensure the battery charge current compatibility before adjusting configuration. Ifitisanticipatedthattheun-switchedsupplymaybeinterruptedbeforenormaluse,weadvisethatthebatteryisleftdisconnectedandcommissioning is delayed until the supply is stable. If mains is not applied afterconnectingthebattery,theunitwillcontinuetodrawaminimalamountofpowerfromthebatterywhilstinstandbymode.Continued use in this state in excess of several months can cause permanent damage to some batteries. It may be necessary to repeat the initial charge/discharge process several times to re-condition the battery and achieve full rated emergency duration. Thiscanbeinitiatedbycyclingtheunswitchedmainssupplyoffandon,oractivatingthetestswitchtwicewithin5seconds.Aftersuccessfulcommissioning,thebatteryshouldbemarkedwiththedateofcommission.

AnOmni-LEDDSTTM module can be returned to standalone self test at any timebydisconnectingitfromtheDALInetworkandforcingaFunctionTestfromthetestswitchorbycyclingtheun-switchedmainssupply.(Seepage10fordetails).

Tofullyresetalltesttimes,disconnectthemains,batterypowerandDALIconnections.Oncepowerisrestored,thecommissioningcycleandrandomisationprocesswillbere-initiated.

ShortdischargeperiodseachmonthfortheFunctionTestwillnotadverselyaffectOne-LUXbatteriesandshouldbeconsideredasamaintenanceexerciseforthebattery.Regularfulldischargecycleswillhoweveradverselyaffect the design life of the battery, so excessive testing should be avoided whereverpossible.

Afullsummaryofautomatictesttimingscanbeseeninthetablebelow.

ThestatusoftheOmni-LEDDSTTM module can be determined at any time from the indicator LED. Details of the indicator LED status conditions and optionaltestswitchfunctionalitycanbefoundonpage10.

INSTALLATION & OPERATION Continued


www.one-lux.com 10

Module Status Information

LED Colour LED Status On Time (Seconds)

Off Time (Seconds)

Sounder Purpose Action required

Green

VerySlowFlash 10 0.5 - Normalstatuswithfullychargedbattery(Commissionedunit) None-Instandbymodeandoperatingasnormal

SlowFlash 1.5 0.5 - First24hourchargeandDurationTest.(Non-Commissionedunit) None-Awaitcommissioningprocesstocomplete

Fast Flash 0.5 0.5 - FunctionTestorDurationTestinprogress.(Commissionedunit) None-Awaitcurrenttesttocomplete

Varied On Off On Off Purpose Action required

Green Long‘On’thenflash 10 0.5 0.5 0.5 - Batterybeingcharged(Commissionedunit) None-Awaitbatterytocharge(Normally24Hours)

Red&Green(alternate) Fast Flash 0.5 0.5 0.5 0.5 - PhysicalselectenabledbyDALIsystemonly ConfirmPhysicalselectwithoptionalTestSwitch

Module Status Information (Fault Conditions) *A function test can also be initiated at anytime whilst mains power is present by cycling the un-switched mains supply or test switch off-on, 2 times within 5 seconds.

LED Colour LED Status On Time (Seconds) Off Time (Seconds) Sounder Cause Suggested action required

Red

SlowFlash 0.5 1.5 Yes 1)Possibleinitialcommissioningdurationtestfailed:

2)Possiblebatteryconnectionfault:

3)Possibleopencircuitorshortcircuitbattery:

4)Possiblebatterycapacityfault:

1)Ifitisanewinstallation,youcandetermineiftheOmni-LEDDSTTM passed the initial commissioning durationtestbycyclingthemainspoweroffthenon,whilstobservingtheindicatorLED.

a)IftheindicatorLEDflashesredthengreenatpoweron,theOmni-LEDDSTTM module did not pass itsinitialcommissioningdurationtestandwasawaitingfurtherinstruction.Cyclingthepowerasperabovehasnowresettheprocessandanewtestwillbeattemptedin24hstime.(Aslongasthemainssupplyisnotinterrupted).Thisprocessmayneedtoberepeatedseveraltimestore-conditionnewbatteriestorestorefull capacity, especially if they have been in storage for some time.

b)Ifaftercyclingthemainspoweroffthenon,theredindicatorremains,theunithaspasseditscommissioningtest,butmayhavefailedaroutinefunctionordurationtestbecauseofthecausesbelow.

2)Whilstthemainssupplyremainson,checkthebatteryconnectionsandrepair/replacefaultypartsifnecessary. Initiate a function test to try and clear the fault indication. If the fault indication does not clear, proceed to 3).

3)Whilstthemainssupplyremainson,disconnectthebatteryandmeasureifitsvoltageisbetween0.8-1.6VDCpercell.Ifitsoutsidethisrange,thebatteryisfaultysoitshouldbereplaced.Ifanewoneisinstalled,cyclethemainspoweroffthenonbeforereconnectingtoinitiatethecommissioningprocess.Ifthevoltageiswithin the range, proceed to next step.

4)Totestthebatterycapacity,ensureithashad24hoursuninterruptedcharge,thenturnoffthemainspowerandobserveiftheratedemergencydurationisachieved.Ifitexceedstheratedduration,youcanreinstatepowerandinitiateafunctiontesttoclearthefaultindication.Iftherateddurationisnotachieved,anditwasacommissionedbatterybefore,replacethebatteryandturnthemainspowerontoinitiateanewcommissioningtest.(Seepage9).

Fast Flash 0.5 0.5 Yes 1)Possiblelampfault:

2)Possibleinternalcircuitfault:

1)Checkthelampandwiringforfaultsordamage.Repair/replaceasnecessary.Initiateafunctiontesttoseeifthe fault has cleared. If the fault does not clear, proceed to step 2) Caution, high voltages can be present at the lamp when the battery is connected even if the mains power is turned off!!

2)Ifrepairing/replacingthelamporwiringdoesnotclearthefault,theremaybeaproblemwiththeOmni-LEDDSTTM. Turnoffmainspower,replacethemoduleandreinstatepowertocommissionthenewmodule.

www.one-lux.com 11

INSTALLATION

Wiring diagrams


Documents

EMERGENCY | ONE-LEDTM OMNI-LED DSTTM | LED DALI …... 3 TECHNICAL INFORMATION LED lamp output - Shaded area indicates typical forward voltage (Vf) vs forward current (If) expected