emerson

AC PowerFor Business-Critical Continuity™

Power Solutions IT System Protection That Grows With Your Needs

TROUBLE IS COMING DOWN THE POWER LINE

AND YOU MUST BE PREPARED

Every operation in your business depends upon the instant, around-the-

clock availability of computers, servers and other electronic systems. If they

aren’t working, neither is your company.

Unfortunately, every piece of this equipment your company possesses is

subject to the whims of the electricity that powers it.

The first step in taking control of this situation is to understand the threats

to your system reliability—and exactly what you can do about them.

2

YOU FACE MANY CHALLENGES INTHE PURSUIT OF PRODUCTIVITY

Is There Really A Problem?“My computer can ride right through a short blip in the

power—why do I need anything else?”

There Are No Simple Solutions“I have people telling me all I need to do is plug each

workstation into a small UPS from the computer store .

That’s good enough, isn’t it?”

Different Needs Require DifferentPower Protection Configurations “Should I have a small UPS for each workstation or

have everything on one large system . Which is best

for my facility?”

A Lot Can Happen Between Your UPSAnd The Equipment It Is Protecting“We have dozens of pieces of networking equipment. How

can I make sure that each one is getting exactly the power

it needs?”

Every Wire Carries The Potential For Trouble“An electrical surge came in through an outside phone line

and knocked out our entire communications system. Is this

going to happen again?”

A Single Source Of Power SimplyMay Not Be Enough“Adding a second power feed would certainly enhance our

availability picture—but who can we talk to about getting

it done right?”

3BUT THERE ARE REAL SOLUTIONS

You Need Protection From All Power ProblemsAn outage is just the problem you can see. There are many other more frequent power

fluctuations—surges, spikes, sags—that you don’t see. These are the conditions that cause the

“unexplained” lock-ups and other potentially damaging results.

“Out-Of-The-Box” Can Put You Out Of BusinessBuying a simple off-line UPS down at the computer store may be a good solution for your

home PC, but it just doesn’t make sense when your business and productivity are on the line.

Protecting critical network and computing systems requires the expertise of someone who

understands all the risks you face from poor power quality.

Centralized Vs. Distributed UPS ProtectionLiebert has the breadth of products that allows you to implement either a centralized or

a one-on-one distributed power protection strategy depending on your requirements.

Whatever configuration you choose, you can count on Liebert to make it the best it can be.

Benefits, such as increased system security, more efficient maintenance and improved

reliability, may make a centralized strategy a better choice for larger operations.

Proper Power Depends On Proper Distribution In network applications, there may be hundreds of different loads with various voltage

requirements, a mix of AC and DC power, plus any number of other electrical specifications.

This calls for a distribution system that is designed to maintain the highest levels of reliability

and quality between the source of conditioned power and the protected equipment.

Power Conditioning And Surge Protection Throughout The FacilityPower conditioning and surge suppression systems are key to maintaining power quality in

critical facilities. Raw utility power is often far too “dirty” for sensitive systems, resulting in lost

or garbled data, unexpected software glitches or shutdowns, even hardware damage. The IEEE

recommended practice is to install transient voltage surge suppression (TVSS) protection on

every electrical conductor that penetrates a facility shell, including power lines, telephone and

other communications links.

Maximum Reliability Demands Dual Power SourcesIf your needs require the highest level of system availability, Liebert has the knowledge and

products to implement a dual-power strategy throughout your enterprise. UPS, transfer

switching, power distribution and other equipment are all brought together to create the

ultimate in reliability.

WHERE DO YOU NEED MISSION-CRITICAL POWER PROTECTION TECHNOLOGY?

4

We have power solutions for any of the applications that are part of your mission-critical business operations.

Liebert has identified ten distinct zones or areas of application, found within many business operations,

which have a requirement for mission-critical power technology. While these zones have similarities in the

importance of their essential functions, they also have different needs for infrastructure protection—all of

which can be met by Liebert solutions.

Large Data Centers—High

availability data and network

applications are the heart of your

enterprise with blade servers and

high-density racks that demand

increased power protection.

Small To Mid-Size Data Centers —

Smaller sized network and computer

facilities, but equally essential to your

operations.

Network Closets—Housing

routers, switches, modems, cabling

devices and numerous other

communications components.

Network Operations Centers—

As networks expand and grow

more complex, you need reliable

and timely access to mission-critical

infrastructure monitoring information

long before problems arise.

Production—Smart factories

backed by a complex electronic

network, from computer-

controlled machinery and

processes to electronic sensors,

business systems and utility

equipment.

Laboratories and Testing—

Sensitive computers and

equipment used for diagnosing

patients, analyzing data,

performing critical tests,

and operating electronic tools

and lab instruments.

Telecom/CATV—Anything from

indoor and outdoor spaces hosting

cable, DSL and fiber optics to

remote cell sites and enclosures.

Emergency Shelters—Emergency

operations centers, 911 response

emergency dispatch, police and fire

facilities, medical facilities, public

works operations and more.

Desktop/Peripherals—Home and

small office computers, modems,

network components and other

electronic equipment that is vital

to business operations.

Point-of-Sale—Today’s cash

registers and store-level computer

networks not only handle sales

transactions, they also collect

and transmit vital customer and

inventory data required to make

informed supply chain decisions.

BiotechnologyIndustry

Retail

Distribution

Industrial

ComputerSystemsHealth Care

Government

Network Operations CentersWith many mission-critical computingsystems located right in the officespace, there is a need for UPS protection that can be placed nearby.Liebert offers a number of power systems that are especially designedfor use in business and office environments.

Small to mid-size Data CenterLiebert offers the full range of UPS, distribution systemsand other power protectionequipment that can adapt to data center growthrequirements.

ProductionLiebert UPS, surge protection and powerdistribution are all key to maintaining theproper operation of process control andother manufacturing systems that utilizemicroprocessor and computer control.

Mechanical RoomsLiebert power protection and conditioningsystems can greatly improve the operationof electrical switchgear and motor controlcenters vital to numerous functionsthroughout an industrial facility.

Emergency SheltersHigh-reliability Liebert UPS systems and DCpower equipment are critical to maintainingoperations in telecommunications sheltersand other unmanned structures.

Data CenterLiebert offers the fullrange of UPS, distributionsystems and other powerprotection equipment tomeet the needs of thelargest data centers andnetworking facilities.

Network ClosetsThese densely-packed equipmentbays, housing servers or other essential communications devicesrequire UPS back-up plus distributionto get uninterrupted, conditionedpower to each and every componentin the rack.

Telecom Wireline/Wireless SitesLiebert can provide a reliable flow of both AC and DC power for telephone switching systems and other communications equipment.

6

The Liebert Adaptive Architecture combines the

advantages of modularity and scalability to create a power

infrastructure that delivers unparalleled benefits.

THE LIEBERT ADAPTIVE ARCHITECTURE:THE POWER NEEDED TODAY. THE FLEXIBILITY

DEMANDED TOMORROW.

Advancing technology, new applications and more

demanding users are driving changes across the

network. Changes that are shaping your ability to

manage availability and costs—today and in the future.

Liebert’s Adaptive Architecture for IT infrastructure

uses components and system configurations that are

designed to accommodate changing technology and

application requirements, enabling higher levels of

equipment protection, lower cost of ownership and

simpler IT management.

The Adaptive Architecture is enabled by the

combination of Liebert technology, application

expertise and organizational commitment. Liebert

offers the industry’s broadest range of mission-critical

power, cooling and monitoring solutions, which serve

as the building blocks of an adaptive architecture.

No One Has More Real-WorldExperience Than Liebert

The Liebert Adaptive Architecture is the result of more

than 40 years experience in the development and

application of mission-critical power and cooling

systems. Our resources include knowledgeable

leadership, as well as an outstanding staff of research,

design, application and service engineers using the

latest technological tools.

These corporate capabilities are backed by the

unmatched expertise of your local Liebert

Representative, Distributor or Solutions Partner. We are

the only company in this business that maintains such a

strong local presence on a national and international

basis. Specifying and maintaining a high availability

power system requires someone who is knowledgeable

in all phases of critical systems protection.

This resource, coupled with our broad adaptive

product line, gives Liebert the ability to create a solution

that will meet your protection needs precisely and

efficiently. We don’t have to take the one or two items

we happen to have and stretch them to come up with

the answer. We give you the best answer every time.

7

Only Liebert can bring together all of the critical

power protection solutions you need to create

system availability that is as close to 100% reliability

as possible.

We use the industry’s widest range of product

solutions and apply them in a way that delivers

flexibility and availability. This philosophy is further

demonstrated by a research and development

strategy that extends the life of current

technologies and ensures new technologies work

with existing systems.

The Liebert Adaptive Architecture Offers Three Primary Advantages:Flexibility—The building blocks that comprise an

Adaptive Architecture can be reconfigured to meet the

demands of new technologies or achieve higher tiers of

protection, giving the power to adapt to change from

growth, new technologies or changing business

requirements.

Higher Availability—Proven mission-critical

technologies and system designs that minimize single-

points-of-failure produce the highest possible

availability of your IT systems.

Lowest Total Cost of Ownership—The higher

availability alone gives the Liebert Adaptive

Architecture a big edge in TCO. Factor in expansion,

support, operating and replacement costs and the

advantage is overwhelmingly in Liebert’s favor.

ADVANTAGE LIEBERT

8

UPS Systems

Liebert offers all three major uninterruptible power supply

(UPS) system configurations:

n Off-Line UPS—Passes utility power straight through to the

protected load with a 2-6 ms break in power when transferring

to battery back-up.

n Line Interactive UPS—Provides power conditioning with a

2-6 ms break in power when transferring to battery back-up.

n On-Line (Double Conversion) UPS—Delivers continuous,

high-quality AC power to equipment with no break when

transferring to battery. Protects equipment from virtually

all power disturbances due to blackouts, brownouts, sags,

surges or noise interference.

Liebert offers UPS systems in the industry’s widest range of

sizes including desktop, rack-mount and enterprise systems for

full facility power.

DC Power Systems For Communications Applications From major switching centers to remote shelters, Emerson DC

power systems offer performance and features to match virtually

every telecommunications equipment application. The line

includes a variety of system capacities ranging from small

systems at less than 3 kW up to large systems rated at over

60 kW. The product offering also includes distribution bays,

enclosures and network management products such as

controllers, monitors and supervisory software to control and

maintain energy equipment in a telecommunications network.

Critical Electrical Distribution Liebert offers a range of power distribution systems designed

to efficiently deliver conditioned power to your critical equipment.

These products include high-reliability distribution systems

specially designed for computer and communications systems

applications, as well as transfer switches offering ultra-fast

transfer between two independent AC power sources to provide

virtually uninterrupted power to sensitive electronic equipment.

Power Quality Protection For applications requiring protection from electrical line

disturbances without the need for back-up capability, Liebert

manufactures a full line of power conditioning equipment. It

includes a wide variety of transient voltage surge suppression

(TVSS) solutions ranging from high-quality surge suppressors

for use with PCs, workstations and other peripherals to

facility-wide systems with sophisticated active tracking

capability. Other products include power conditioning systems

featuring high-efficiency magnetic synthesizer technology

and isolation transformers to reduce line noise and other

power line problems.

Power System Monitoring Liebert’s family of power communications software and

hardware provides multiple levels of monitoring and control.

Capabilities range from automated shutdown software to

facility-wide centralized systems that provide a full range of

monitoring, control and analysis.

A COMPREHENSIVE POWER SOLUTION—WE’RE THE ONLY ONE WHO HAS IT

The Widest Range Of Products GivesYou An Infinite Range Of Solutions

9

There Is A Liebert Power SolutionTo Meet Every Need

CONTENTS

Co

mp

ute

r Ro

om

s

Dat

a C

ente

rs

Net

wo

rk C

lose

ts

Pro

du

ctio

n

Lab

s &

Tes

tin

g

Tele

com

/ C

ATV

Emer

gen

cy s

hel

ters

Des

kto

ps

/ Per

iph

eral

s

Poin

t of

Sal

e

MISSION-CRITICALAPPLICATION ZONES

10 Desktop UPSFor One-On-One Applications

11 Liebert PowerSure PST off-line UPS n n

12 Liebert Powersure PSP off-line UPS n n

13 Liebert PowerSure PSA line-interactive UPS n n

14 Rack-Mount UPS For Distributed Network Applications

15 Liebert PowerSure PSI line-interactive UPS n n n n

16 Liebert GXT2, 500-3000VA on-line UPS n n n n n n n

17 Liebert GXT2,6 and 10 kVA on-line UPS n n n n n n

18 Rack Enclosure Systems

18-19 Knurr rack enclosure system n n n n n n n n

21 Liebert Foundation EX expansion system option n n n n n n n n

22 Liebert MP advanced power strips & Knurr DI-STRIPs n n n n n n n n

23 Enterprise UPS For Computer Room And Data Center Applications

24-25 Liebert Nfinity on-line UPS n n n n n n n

26 Liebert NX, 10-30 kVA on-line UPS n n n n n n

26 Liebert NX, 40-120 kVA on-line UPS n n n n n n n

27 Liebert Npower on-line UPS n n n n n n n

28 Liebert Series 610 on-line UPS n n n n n

29 Liebert FS flywheel DC energy storage n n n n n

30 DC Power Systems For Telecommunications Applications

31 NterpriseIP™, Small Power, Medium Power, Large Power, n nInverter Systems

32 Power Distribution Systems For Critical Protection Applications

32 Liebert FDC power distribution cabinet n n n n

33 Liebert RDC remote distribution cabinet n n n n

34 Liebert Precision Power Center power conditioning and distribution cabinet

n n n

34 Liebert FPC power conditioning & distribution cabinet n n n

35 Liebert SmartSwitch transfer switch n n n n

36-37 Liebert STS2 static transfer switch n n n n

36-37 Liebert STS2/PDU static transfer switch/power distribution unit

n n n

38 Surge Protection And PowerConditioning Systems

Surge Suppression39 Liebert AccuVar transient voltage surge protection n n n n n n n n n

39 Liebert Hybrid Advantage surge protection n n n n n n n n n

39 Liebert Interceptor transient voltage surge protection n n n n n n n n n

39 Liebert LM Series surge protective device n n n n n n n n n

39 Liebert Type SS surge protection n n n n n n n n n

39 Liebert Panelguard Extension panelboard surge protection

n n n n n n n n n

39 Liebert Specialty Surge Protection Devices n n n n n n n n

Power Conditioning40 Liebert Datawave magnetic synthesizer n n n41 Liebert Isolation Transformer n n n

42 Monitoring And Control n n n n n n n

One-On-One ProtectionThe Liebert PowerSure® family includes

off-line UPS and line-interactive UPS to

give you a real choice in desktop and

network component protection.

PERFECTPROTECTIONFOR DESKTOPAND SMALLNETWORKAPPLICATIONS

Liebert desktop power solutions are

designed for applications where one or a

few pieces of equipment require surge

suppression or basic power protection

with battery back-up.

Liebert PowerSure® ProductsOffer One-On-One PowerProtection Solutions Forn Home And Small Office Desktop PCs

n Network Workstations

n Network Routers, Bridges And Hubs

n Point-of-Sale Terminals

n Other Sensitive Electronics

10

De

skto

p U

PS

11

The Liebert PowerSure PST off-line UPS is available in: 350 and 500 VA at 120 VAC,

as well as 500 and 650 VA at 230 VAC. Designed for easy operation, the Liebert

PowerSure PST provides enough battery back-up to save work in process and shut

down your system.

Standard Features For All Liebert PowerSure PST Models:n Lightning and surge protection

n Compact design [dimensions: 3.7” (H) x 9.8” (W) x 6.6” (D)]

n Data line surge protection for telephone/fax/DSL/modem

n USB, Microsoft Windows (XP and 2000) and Mac (OS X version 10.2 or later) Certified

n USB communications port for unattended shutdown

n Continuous overload detection

n Battery start (dark start) capability

n Multi-LED indicators

n Three battery-backed outlets and two surge-only outlets

n Alarms for on battery, low battery, overload and site wiring fault

n Advance warning of UPS shutdown

n Full sequenced battery testing

n Two-year warranty

LIEBERT POWERSURE® PST OFF-LINE UPS

COMPACT, ECONOMICAL OFF-LINEUPS POWER PROTECTION FOR

ELECTRONIC EQUIPMENTD

esk

top

UP

S

Data Line Surge Suppression (One Input/Two Output Ports)

Liebert PowerSure PST Offers USB Communication

The operation of Liebert PowerSurePSP can be monitored using

n Liebert MultiLink® AutomatedSystem Shutdown Software

For more information, see pages 42 and 43.

Liebert Power Monitoring Capabilities

Liebert PowerSure PSP is an economical, full-featured UPS that delivers cost-effective power

protection in a compact package. It features a configurable input power selector switch,

offering the user a wide input voltage window. The Liebert PowerSure PSP is

available in three sizes: 350, 500 and 650 VA at 120 VAC. For maximum flexibility with a

variety of computing equipment, the unit includes a choice of communications—USB,

serial or contact closure.

LIEBERT POWERSURE® PSP OFF-LINE UPS

FULL-FEATURED OFF-LINE UPSPROVIDES COST-EFFICIENT,

SPACE-SAVING POWER PROTECTION

Liebert PowerSure PSP Offers A Variety Of Standard Features:n Four battery-backed UPS outlets with spacing to accept transformer blocks

n Two surge-only outlets

n Greater than four minutes of battery backup at full load

n Wider input voltage window

n User replaceable hot-swappable batteries

n Full-sequenced battery testing

n Lightning and surge protection


n USB, Microsoft Windows (XP and 2000) and Mac (OS X version 10.2 or later) Certified

n Two-year warranty

Data Line SurgeSuppression

User replaceable Hot-Swappable BatteriesIncrease product life andoffer prolonged, reliable UPSperformance.

Data Line SurgeSuppression

Outlets WithSpacing ToAcceptTransformerBlocks

12

The operation of the LiebertPowerSure PSA can be monitoredusing


n Third Party Monitoring System



13

De

skto

p U

PS

LIEBERT POWERSURE® PSA LINE-INTERACTIVE UPS

VALUE-ADDED UPS COMBINESADVANCED FEATURES WITH

LINE-INTERACTIVE PERFORMANCE

Liebert PowerSure PSA is a line-interactive UPS available in four sizes: 350, 500,

650 and 1000 VA at 120 VAC and 230 VAC. The Liebert PowerSure PSA features double

boost/single buck technology that prolongs UPS battery life by providing automatic

voltage regulation (AVR) and compensating for incoming power fluctuations before

going to battery. The unit also includes a microprocessor-based control and monitoring

package with dual color LED indicators on the front panel for easy operation. A choice of

communications includes USB, serial or contact closure.

Other Standard Features Included On All Liebert PowerSure PSA Models: n Lightning and surge protection


n USB, Microsoft Windows (XP and 2000) and Mac (OS X version 10.2

or later) Certified

n 4 or 6 battery-backed UPS outlets with space for transformer blocks,

and two surge-only outlets

n Continuous overload detection

n Hot-swappable user replaceable batteries

n Greater than five minutes of battery backup

time at full load when utility fails

n Battery start (dark start) capability


n Two-year warranty

Rack-mounted servers are at the heart

of today’s network computing systems.

These critical components need reliable,

compact power protection that will keep

pace with their growing needs.

Protection That Fits In Anywhere

From line-interactive units to true

on-line models, Liebert rack-mount

UPS systems are designed for reliability

and space-saving flexibility. No one

packs more power capacity and

features into a smaller package.

Liebert Has Rack-mountUPS Solutions For:n PCs

n Network Workstations

n Servers and Critical Nodes

n Network Routers, Bridges and Hubs

n Large Network Peripherals

n Storage Systems

n Point-of-Sale Terminals

n Test Equipment

n Other Sensitive ElectronicsR

ac

k-M

ou

nte

d U

PS

14

R AC K- M O U N T E DPOWER SOLUTIONS FO R GROW I N GN E T WO R K S

Other Standard Features OfLiebert PowerSure PSI: n Seven to eight battery-backed outlets

n Data line surge protection for

telephone/fax/DSL/modem

n Advance early warning of UPS system status

n User-replaceable hot swappable batteries

n Configurable input voltage selector

n Wider input voltage window

n Greater than five minutes of battery

backup time at full load when utility fails

n External battery cabinet available


n Lightning and surge protection

n USB, Microsoft Windows (XP and 2000) and

Mac (OS X version 10.2 or later) Certified

n Remote emergency power off

n Two-year warranty

The operation of Liebert PowerSurePSI can be monitored using

n Liebert MultiLink®AutomatedSystem Shutdown Software

n Liebert Nform MonitoringSystem

n Third-Party Monitoring Systems



15

Ra

ck

-Mo

un

ted

UP

S

LIEBERT POWERSURE® PSI LINE-INTERACTIVE UPS

PROVEN HIGH-LEVEL PERFORMANCEAND RELIABILITY FOR SERVER AND

NETWORK POWER PROTECTION

Designed for the IT environment, Liebert PowerSure PSI is a slim 2U size rack/tower style,

line-interactive UPS system. It offers a configurable input voltage window allowing the

customer to precisely match their input voltage. A choice of four communications options

includes SNMP, serial, contact closure and USB. The Liebert PowerSure PSI is available in

1000, 1440, 1920, 2200 and 3000 VA at 120 VAC and 1000, 1440, 2200, 3000VA at 230VAC.

Optional 2U POD output distributionand maintenance bypass moduleensures continuous uptime, even during UPS maintenance.

External 2U Cabinets supply additionalbackup time.

The operation of the Liebert GXT can be monitored using



n Liebert Universal Monitor andRemote Power Monitor Panels




Liebert GXT leads the industry in combining small size, high capacity and multiple features.

Designed to be either rack-mounted or installed in a tower configuration, the UPS is available in 500,

700, 1000, 1500, 2000 and 3000 VA ratings, in both 120 V and 230 V models.

A true on-line UPS, Liebert GXT includes features such as power factor correction, internal

batteries, frequency conversion, unlimited external battery connectability and internal bypass

capability. And all this is housed in a smaller 2U size cabinet that cuts space requirements in half

while providing up to 3 kVA of true on-line power…batteries included. The UPS can also be used

with external batteries for extended run times.

A Windows™ configuration program, included with each unit allows the user to program a

variety of operating parameters. This capability allows you to customize Liebert GXT performance

to your specific requirements, providing a new level of power protection control and adaptability.

LIEBERT GXT 500-3000VA ON-LINE UPS

COMPACT UPS COMBINES ON-LINERELIABILITY, CONFIGURABILITY AND

INTERNAL BATTERIES

16

Other Features Of Liebert GXT 2U Models: n Microprocessor-based control and

monitoring packagen Input power factor correctionn PWM invertern Integral dynamic bypassn Integral sealed, flame retardant, non-spillable,

user replaceable batteryn Automatic and manual battery test feature

with push button and indicatorn Input and output noise suppressionn RS232 communication port n IntelliSlot® communications portn Two-year limited warranty

LIEBERT GXT 6 & 10 KVA ON-LINE UPS

HIGH CAPACITY, COMPACT ON-LINE UPSWITH FLEXIBLE OUTPUT VOLTAGE AND

POWER DISTRIBUTION

Other product features of LiebertGXT 6 & 10 kVA UPS models include:n Wider input voltage window enables the UPS

to support the critical load without having to

transfer to battery

n Patented output neutral bonding feature

meets UL 1778 standard by providing a

method for maintaining the UPS output neutral

to ground bond in all modes of operation

n Internal bypass assures continuity of power

to critical loads during system problems

or maintenance

n Automatic frequency detection matches line

input frequencies of either 60 or 50 Hz

n User-replaceable hot swappable internal

batteries provide five minutes of runtime

at full load

n Additional battery cabinets available for

extended backup time

n Liebert IntelliSlot® communications port

utilizes Liebert IntelliSlot® Web Card to

provide SNMP and web-based management

The operation of the UPS can bemonitored using



n Liebert Universal Monitor AndRemote Power Monitor Panels




User replaceable hot swappableinternal batteries

Liebert GXT 6 & 10 kVA UPS systems provide true on-line protection in the smallest cabinets in

their capacity range. The UPS systems offer internal batteries, unlimited extended external

batteries, and internal bypass capability, resulting in continuous uptime for the connected

equipment. This makes the UPS an ideal fit in applications where the power requirements are

demanding—but rack space is limited.

Application versatility is achieved through the use of a dual inverter design capable of providing

simultaneous output voltages of 240/120, 208/120, 230/115, 220/110, or 200/100 VAC. The input

is power factor corrected to approximately .98, enabling the UPS to power a wide variety of

equipment with different voltages.

For installation flexibility, you may choose from several different wiring configurations made

possible by the use of removable power distribution boxes that simply plug into the rear of the UPS.

Options include hardwired or receptacle connections, as well as maintenance bypass capabilities.

17

Ra

ck

-Mo

un

ted

UP

S

KNURR RACKS AND CABINETS

READY-TO-DEPLOY RACK AND ENCLOSURE SOLUTIONS

Emerson Network Power’s Knurr, a world leader for standardized rack systems, has joined withLiebert to build comprehensive capabilities in rack solutions, mission-critical cooling, and systemsintegration for data center and telecom sites.

Knurr’s broad platform of rack systems will integrate with cooling and power managementtechnologies from Liebert, helping you solve problems in new and existing installations and givingyou more design flexibility. Knurr and Liebert are taking proven technologies from room-levelapplications and integrating them with the rack.

18

KNURR MIRACEL® OPEN FRAME ANDSERVER RACKS

Knurr Miracel racks are tailored to your requirements. The platform technologyprovides the basis for a versatile range of racks, which has been setting standards in theworld of IT, telecommunications and network technology as the solution for a diverserange of requirements.

The design of the Knurr Miracel product line enables all requested dimensions andstandards to be tailored to specific customer requirements. Adjustments can be easilymade thanks to the broad range of Knurr accessories, including active and passivecomponents, need-oriented power supply and distribution, cable management andscalable thermal management options.

The range of products runs from open racks to closed cabinets, EMC-shielded to heavy-duty racks with a static load of up to 2000 lbs. All are equipped to meet the most diversecustomer needs. The racks are lightweight yet stable, easy-to-assemble and offernumerous configuration possibilities.

19

Ra

ck

s & In

teg

rate

d C

ab

ine

ts/Ma

na

ge

d P

ow

er

Key features include:

n Aluminium construction — Patentedextruded aluminum frame allows for easy mounting of components, and offers high flexibility and stability withoutexcessive weight.

n T-slot system — Simple installation of manycomponents — anywhere in the frame.

n Thermal management — Fully perforateddoors, with 83% open area far exceed serverOEM requirements for effective heatdissipation additionally, a fan can be highlyeffective mounted on the rear door for spotcooling.

n Lockable doors — Offers physicalprotection for components against

unauthorized access.

n Cable management — A complete cablemanagement system assures optimum cable routing and includes an extensiverange of accessory components to helpmanage cabling effectively.

n Vented roof— A vented roof also offersgenerous cable entrance.

Liebert GXT on-line UPS

EnvironmentalControl Module(ECM)

BCM (Back-up Cooling Module)

Secure Door—lockable doorprovides anextra measureof security bylimiting accessto critical equipment.

Sealed Door — speciallydesigned rubber gasketprovides NEMA12 sealing protection.

Where a minimal amountof equipment is needed,the Foundation 44” tallenclosure provides compact protection.

Dual-Split RearDoor available

Bundled UPSsystems available

Wall Mount Systems12 U Hinge Body “swingout” and 12” depth LowProfile available.

Internal PowerDistributionA wide range ofinstalled powerstrips is availableto betteraccommodatepower distributionneeds within theenclosure.

EX Cable ManagementChannelThis versatile optionhelps to enhancecabling organizationand internal airflow.

20

True On-Line Power Protection

Protecting The Edge Of The Network

Liebert has brought together severalof our product solutions to create theIP Telephony Availability System.Especially designed to protectswitches, routers and other criticalcomponents, this solution is ideal foruse in remote locations such as branchoffices, retail stores and other edge ofthe network applications. Housed in aLiebert Foundation™ wall mountenclosure or freestanding enclosure.

The Liebert UpStation®

GXT 2U, a true doubleconversion UPS, delivers thehigh level power qualityrequired to fully protectcritical network switchingcomponents from all powerproblems. Available in sizesfrom 700 up to 3000 VA.

Continuous Power Availability

In most cases, your criticalrouters and other networkcomponents cannot bewithout power even forscheduled UPSmaintenance. To meet thisneed, the Liebert 2U PowerOutput Distribution (POD)system ensures continuousuptime by providingmaintenance bypasscapability as well as poweroutput distribution.

Power System Monitoring,Communications & Remote Control

The Liebert Webcard, housed within the UPS, will deliver SNMP and web-managementcommunicationscapabilities to yourpower system, includingthe ability to remotelyreboot the switch by cycling the UPS power off and on.

The Liebert IP Telephony Availability System, version1.0, has met the Cisco Technology Developer PartnerProgram test criteria for interoperability with CiscoCallManager Express 3.1, Cisco Unity Express, release1.1.2, Cisco Unity 4.0 (3), and Unity Bridge 3.0 (2).

Liebert IP Telephony Availability System

21

Inte

gra

ted

Ca

bin

et S

olu

tion

s/Ma

na

ge

d P

ow

er

LIEBERT FOUNDATION® EX EXPANSION SYSTEM OPTION

ADAPTIVE SPACE FOR HIGH DENSITY HEAT,CABLE AND EQUIPMENT SUPPORT

Liebert continues its leadership in critical space thermal, power and equipment management by

introducing the Liebert Foundation EX System—a flexible solution to rack enclosure space and

cable problems that utilizes an “Expansion Channel,” cable management and heat rejection

options to provide adaptive space for airflow, equipment and cable support. The Foundation EX

system allows you to quickly respond to the changing space, cabling and heat removal

requirements of your rack-based systems.

Adaptive features of the LiebertFoundation EX System include:

n The ability to individually adapt each enclosure tochanging space, cabling and heat removal requirementswithout the necessity of removing equipment—hotswappable.

n Cost-effective performance thanks to optimized use of critical rack space and adapting to changingequipment depth and space requirements.

n Enhanced heat rejection and airflow routes andremoves heated air using passive/active options and cable management.

n Organizes cabling, distributes power, improves equipment access, minimizes disruptions and optimizes air flow within the enclosure.

n Improved equipment access supports high load densities, improves management of components,allows easy installation of equipment.

n Fully compatible with Liebert Precision Cooling andXD Systems.

n Integrates easily with Liebert power systems, including UPS and Liebert MP Advanced Power Strips.

Foundation EX—available in 2,4,6 inch size.

Variety of CableManagement—spools, rings, trays,velcro, vertical orhorizontal alignment.

Cable troughs speed and simplify wiring-mounted tothe enclosure top for directrack-to-rack or row of racks.

Inte

gra

ted

Ca

bin

et S

olu

tion

s/Ma

na

ge

d P

ow

er

22RACK POWER STRIPS

FLEXIBLE POWER DISTRIBUTION FOR ITRACKS AND CABINETS

Liebert MP Advanced Power Strips

Liebert MP advanced power strips are

designed to distribute and manage power

within network cabinets and server racks.

Models are available with remote monitoring

and/or control capabilities for power

distribution at the load/equipment level.

Liebert MP Advanced Power Strips are

offered in multiple configurations that

provide a choice of capacities and number of

receptacles, as well as monitoring and control

capabilities to meet the power management

requirements of any rack-mounted

equipment. Liebert MP Advanced Power

Strips monitor electrical attributes of an

individual power strip, including real-time

remote and local display of total strip true

RMS volts, amps and watts.

Knurr DI-STRIP® Power Strips Knurr DI-STRIP® Power Strips meet a broad

range of power distribution requirements forIT and other applications. Designed especiallyto handle the growing number of electroniccomponents that can be housed withinnetwork cabinets and server racks, the spacesaving product line is available with a range ofaccessories including circuit breakers,overvoltage protection and more.

Knurr DI-STRIP is available in configurationsto meet varied rack mount equipment needs:

n The Knurr DI-STRIP® TriplePower® strip usesa three-phase feed to supply network rackswith three times the power to meet therising energy requirements of blade serversand other high-density equipment. TheKnurr DI-STRIP Triple Power strip is availablewith up to 48 receptacles for maximumpower distribution coverage.

n The Knurr DI-STRIP® BladePower® powerstrip is a new generation of the powerdistribution units that ensures fail-safepower supply in network racks. The KnurrBladePower optimally distributes therequired power over the entire rack.

n The Knurr DI-STRIP® Classic power stripoffers cost-efficient power distribution for awide variety of rack applications utilizingNEMA5-15R receptacles.

The need to safeguard critical operationsfrom power problems can be solvedthrough the use of large-scale UPS systems.

A Powerful Defense AgainstUptime Threats

Liebert offers a full range of enterprise

power protection solutions for any size

facility from a small computer room to the

largest data and communications centers.

Liebert Enterprise UPS SolutionsAre Ideal Forn Large-Scale Data Centers

n Facility-Wide Networks

n Large-Scale Telecommunications Centers

n Colocation Facilities

n Internet Data Centers

n Server Farms

n Data Warehouses

n Network Management Centers

n Medical Imaging Equipment

n Test and Laboratory Facilities

n Industrial Process Control Operations

PROTECTING THE ENTERPRISE

23

En

terp

rise U

PS

LIEBERT NFINITY®

AN EASILY SCALABLE, INCREDIBLY INTELLIGENT,

REMARKABLY REDUNDANT UPS THAT TAKES SYSTEMS

AVAILABILITY TO THE NEXT LEVEL

The Liebert Nfinity power system is a scalable 4 to 16 kVA or 12 to 20 kVA UPS

designed with N+x parallel redundancy to provide a fault-tolerant network of power

protection. Its modular design was devised to provide easy scalability to users as

their power demands grow. Configurations can be cost-effectively upgraded without

re-investing in a new system or installation.

A True On-Line System That Delivers Continuous,Regenerated SinewaveOutput Power

The Liebert Nfinity is a true on-line,

double-conversion UPS that delivers

100% power conditioning, zero transfer

time to battery, no change in output

voltage and better transient suppression

than line-interactive units.

Its unique frame design houses all of

the modular system components,

including 4 kVA power modules, battery

modules and system control modules.

By simply installing additional power or

battery modules, you can expand your

current system, extend backup runtime

or add redundancy.

Built-in intelligence is provided by

system level and individual module

microprocessor controls which increase

UPS functionality, communications and

reliability. Nfinity also offers added

reliability with internal bypass and

optional redundant monitoring.

The system’s fault-tolerant design

enables the intelligent power and

battery modules to take themselves

off-line if there is a problem…without

compromising system integrity.n Intelligent power modules provide

protection from all power

aberrations, and a patent pending

electrical-current-sharing technology

provides equal distribution of power

among all modules. Liebert Nfinity

power modules feature power factor

correction (PFC) to create a sinusoidal

input current waveform.

n The IntelliBattery™ modules utilize

multiple sensors to continuously

monitor battery voltage, current

and temperature to determine and

predict performance.

n The IntelliControl™ module works

with the user interface to provide vital

information about the condition of

the power and battery modules. An

optional paired system control ensures

that operations and communications

are always available in the event of

any single failure.

24

25

En

terp

rise U

PS

Additional Features Of The LiebertNfinity Power System:n Patent pending frame design that houses all of the

modular system components

n Hot-swappable modules that allow the user to replace

modules or upgrade the system without disturbing

connected equipment

n Continuous self-diagnostics that detect and isolate

faults to prevent cascading system failures, as well as

to simplify maintenance and troubleshooting

n Patent pending intelligent bypass technology that

provides seamless transfers to and from the bypass source

n Wide input voltage window that minimizes battery

operation to maximize battery life

n Fully assembled and factory-tested, simple to install

and ready for use for a plug-and-play solution that is

functional right out of the box

n Additional battery cabinets can be added for backup

times up to 72 hours

n Two-year limited warranty for repair or replacement of

your Liebert Nfinity UPS during the initial warranty period

with warranty extensions also available

Power and batterymodules are housed in identical bays withinthe frame. Power modules must be contained in the tophalf of the frame, whilebattery modules can be utilized in any of the bays. This allowsbattery backup timesto be configured to customer needs.

The system controlmodule provides communications andcontrol for the unit.

The system utilizes independent 4 kVApower modules. Up to six power modulescan be operating atone time.

Each battery module is composed of tenindividual 12-volt batteries encased in a plastic housing.

Initial System4 kVA Redundant

PowerModules

Blank

Batteries

UpgradeSystem Capacity8 kVA Redundant

PowerModules

Blank

Batteries

Extend SystemRun Time

8 kVA Redundant

PowerModules

Batteries

The operation of the Liebert Nfinity®

UPS can be monitored using


n Liebert Nform™ MonitoringSystem





The operation of the Liebert NX UPScan be monitored using

n Liebert IntelliSlot Web Card



n Liebert SiteScan® WebComprehensive FacilityMonitoring System





26

LIEBERT NX UPS

POWER DESIGNED TO GROW WITH YOUR NEEDS

The Liebert NX is a true on-line, double conversion, three-phase UPS systems that delivers

complete, centralized power protection for mission-critical systems. Designed to meet the high

availability power needs of a wide variety of IT applications, the Liebert NX UPS combines

advanced operating features, compact size and low cost of ownership in a range of sizes to suit

room or data center needs.

Liebert NX 10, 15, 20 & 30 kVA UPS —

Increases growth flexibility by handling

larger loads, and offers the ability to

parallel like-sized 20 and 30 kVA modules

for increased capacity and redundancy.

Liebert NX 40, 60, 80, 100, 120 kVA UPS —

Available with Liebert Softscale™ technology that provides

flexibility to increase UPS capacity by 20 or 40kVA

without changes in your infrastructure. Allows paralleling

of unlike-sized models for capacity or redundancy.

Designed for optimized performance with the same high

efficiency at 40% utilization as at 100% utilization.

Liebert NX UPS systems incorporate anumber of exceptional technical features:n Wider input voltage and frequency tolerances contribute

to higher system availability by minimizing battery usage.n High overload rating handles 125% for 10 minutes, 150%

for one minute and a 1000% overload for 10 milliseconds.n Digital controls provide the fastest possible power

management to enhance reliability, accuracy and

efficiency.n Front access for easy installation and servicing of unit.n Triple-mode battery charger for fast battery recharge.n Compact footprint requires less floor space, leaving you

with more room for other equipment

En

terp

rise

UP

S

LIEBERT NPOWER™

INNOVATIVE POWER PROTECTION FORMAXIMUM POWER QUALITY

Liebert Npower is the next generation of large-scale UPS, utilizing true double-conversion on-line

technology to protect against the full spectrum of input and output power disturbances. Liebert

Npower’s all-digital ActiveStar™ controls are DSP-based and feature a unique, patent-pending technology

that allows it to make ultra-fast adjustments to changing loads, including subcycle pulse-width

corrections to keep the output voltage waveform nearly flawless. The Liebert Npower system is

available in seven models ranging from 30 kVA up to 130 kVA.

The Liebert Npower is rugged enough to handle load branch faults, input faults, 100% step loads, PDU

startup inrush and motor-load startup. Output voltage distortion (THD) typically measures less than

2.5% — even under worst-case conditions. The combination of rugged inverter and continuous-rated

static switch gives the Liebert Npower exceptional overload capability.

The operation of the Liebert NpowerUPS can be monitored using





n Third-Party Monitoring Systemsn Liebert BDS-40 Battery Monitoring

Alber Technology By Liebert



Standard And Optional Features Of The Liebert Npower UPS:n 1+1 redundant configurations (for single-bus systems)

that allow concurrent maintenance resulting in virtually

100% availability of conditioned power

n Load bus synchronization option for dual-bus systems

with two power feeds for added availability (for use

with Liebert transfer switches or dual-input PDUs)

n Excellent efficiency powering non-linear, unbalanced

and crest loads

n Small footprint in a full-featured system

n Exceptional overload and transient performance

n All DSP-controlled UPS

n Easy-to-read screen and navigation menu on a

large LCD display

n Superior battery algorithms used to minimize operation

of batteries and include self-test and temperature

compensated charging

27

En

terp

rise U

PS

28

LIEBERT SERIES 610

ULTIMATE RELIABILITY FOR LARGE-SCALE, MISSION-CRITICAL

APPLICATIONS

The operation of the Liebert Series 610 UPS can be monitored using



n Liebert SiteScan® WebComprehensive Facility Monitoring System


n Third-Party Monitoring Systemsn Liebert BDS-40 Battery Monitoring

Alber Technology By Liebert



Other features include:n Higher DC bus utilization provides higher AC/AC and

DC/AC efficiency and allows a relatively smaller battery.n Continuous improvement dramatically improves

reliability by reducing the number of parts—and the

potential points of failure within the system. n Lower operating costs and long life thanks to 93%

operating efficiency and an industry leading power

factor of greater than 0.92 for all models.n The ability to handle unbalanced and 100%

non-linear loads.n Lower heat output eliminates the need for complex

air cooling arrangements. n Robust inverter manages overloads and faults without

the need for a static switch on the system output.n Designed for intuitive, menu-driven operation, a large

backlit LCD operator interface displays system controls,

full-featured monitoring and alarm notifications.

Offering the ultimate in power protection efficiency and reliability for larger facilities, Liebert

Series 610 UPS systems are available in a wide range of capacities from 100 kVA to 1000 kVA.

These systems are designed to protect mission-critical operations from the full range of power

quality problems and outages.

Efficient IGBT (insulated gate bipolar transistor) technology is combined with pulse width

modulation/stepwave topology to provide reliable operation and create a unit that packs more

capacity into a smaller footprint.

Thanks to all-digital controls and a unique inverter topology, the Series 610 can be applied

in several single-bus configurations, including single module, parallel redundant and isolated

redundant systems. For added reliability, multiple units can be utilized in a dual-bus system

with two power feeds to provide redundancy during normal operation, as well as continuous,

shutdown-free operation when service is required.

System benefits includen The compact, lightweight, and reliable Liebert FS

flywheel system is safe and environmentally friendly.n Offers a low installation cost, small footprint, low

maintenance and long operating life.n Unlike batteries, the Liebert FS uses no toxic metals

and emits no explosive gases.n Provides quick recharge, operates under a wide

range of temperatures.n Patented safety system provides a safe shutdown

under all circumstances.n When used with batteries, becomes the primary

DC energy source of more than 98% of power

disturbances (most power disturbances last less

than 4 seconds), reserving the battery for longer

outages, extending battery life and improving

overall UPS output reliability.n When used in a batteryless configuration, provides

the needed short-term DC energy bridge to an

engine generator.

29

En

terp

rise U

PS

LIEBERT FS FLYWHEEL SYSTEM

RELIABLE RIDE-THROUGH ENERGYSTORAGE, WITH OR WITHOUT BATTERIES

The Liebert FS flywheel DC energy storage system is designed to be a more efficient and

reliable alternative to standard battery systems used with uninterruptible power supply (UPS)

systems. The advanced, high-RPM, composite flywheel technology used in the Liebert FS

provides 190 kW of instant ride-through DC power and voltage stabilization for approximately

10 seconds—more than enough for the vast majority of electrical disturbances.

The Liebert FS can be used as the sole back-up DC energy device or in conjunction with

conventional battery strings or generator sets. When used along with batteries, the flywheel

system will eliminate their use for short power fluctuations, helping to extend life and save

capacity for longer outages. It can also be used alone to provide ride-through power until

back-up generators come on line.

The Liebert FS is engineered to support larger Liebert UPS systems, including the Liebert

Npower and Liebert Series 610 models. A single flywheel can be sized to support UPS systems

up to 225 kVA. Multiple flywheel systems can operate in parallel to support larger systems.

P OW E R F U LSO LU T I O NS FO RC R I T I C A L DATAA N D T E L ECO M A P PL I C AT I O NS

DC

Po

we

r Sy

stem

s

30

From major switching and data centers to remote shelters and computer rooms,Emerson Network Power DC power systemshave the performance and features tomatch your network application needs.

A Brilliant Combination Of Technology And Real-World Capabilit y

The Emerson Network Power line of DC power

systems demonstrates unparalleled reliability

and industry-leading MTBF ratings. It includes

power-factor corrected, AC/DC switch mode

rectifiers, operating at 48 and +24 VDC. Emerson

Network Power rectifiers—the heart of the power

system—possess some of the highest power

densities and smallest footprints in the business.

These power solutions can be further enhanced

with the addition of intelligent controllers,

remote system monitors, battery management

units and a full range of distribution modules.

Emerson Network Power DC PowerSolutions Are Ideal Forn Central Office n Computer Roomn Data Centern Enterprise (PBX, LAN)n Network Closetn Outside Plant: Broadband, Access and Wirelessn Radio Base Station / Microwave Siten Wireless and Wireless Access

Business-Critical Continuity For Communications

31D

C P

ow

er S

yste

ms

NterpriseIP™ Solution

Emerson Network Power offers a complete range of power systems to meet the energy capacity needs of any dataor telecom application. To view our complete DC Power catalog, visit EmersonNetworkPower.com/DCPower.

Medium DC Power Systems - 240VAC Single PhaseModular, flexible design for switching, wirelessbase stations, transmission, LAN, WAN and othernetworking operations.

AC powered DC UPS for VoIP and PoE applicationsn Pre-engineered, space saving, high

efficiency solution with flexible ordering configurations

n Easy to install and configure n Plug-n-play integrated cabinet design n Redundant architecture provides

six nines availabilityn Major components hot swappablen Easily expands for future growth

Small DC Power Systems 120 / 240VAC Single PhaseHighly reliable, uninterruptibleand cost-effective powersystems for small data ortelecom installations.

Mini DC Power Systems 120 VAC or 220/240VAC Single FeedHigh-density mini-sized DC power solutions for outside plantenclosure, central office or embedded applications.

LORAIN® VPS486000 / 246000 Modular powersystem providing upto 6,000 amps ofpower for -48VDC or+24VDC systems

Large DC Power Systems 208/480VAC 3 PhasePower systems for data center and centraloffice applications, including wireline andwireless switching, transmission, datarouting and large telecom hotels.

NetSure™ 701Modular powersystem providingup to 4,000 ampsof power at -48VDCwith 3200 wattPCUs

Candeo™ CSP 48300 Candeo™ CSP 24300Modular 23” rack-mount -48VDC or +24VDC powersystems up to 300 amp

LORAIN® PS 4810000 (LPS) Integrated -48VDC 3 phase PCUs, distribution,control and monitoring in a single frame.Expandable to 10,000 amps with additionalframes.

LORAIN®‚ XP 48450 / 48500 (LXP) Compact expandable -48VDC from25 to 425 amp for 19” or 23” rackmount applications withintegrated battery management

LORAIN® XP (LXP) 4870 / 4890 Builds upon the LXP 48500platform, bringing internaldistribution to the existing highcapacity yet compact 2RUpower shelf platform

NetSure™‚ 201 NMFB Integrated power shelf holdsup to six 400 or 800 wattrectifier modules in a 23”shelf solution, combiningspace efficiency and reliablerectifiers with an optimizedcontroller

NetSure™‚ 201 NNFB Integrated power shelf holdsup to two 400 or 800 wattrectifier modules in a 19” or23” shelf solution, combiningspace efficiency and reliablerectifiers with an optimizedcontroller

LORAIN® CIP 4890 & 48120Complete -48VDC system inone 19” or 23” rack-mountshelf with integrateddistribution for mini to small-sized power applications thatrequire up to 6,000 watts

LORAIN® IS 21000Modular invertersystem Grows with3.5kVA up to 21kVA

LORAIN® DB 48500 Thismodular systemprovides effectivesecondary loaddistribution for single ormultiple -48VDC feeds.LORAIN® Monitoring System —

LMS1000 This low profilemodular design withinput/output (I/O) networkingcapability and a fully integratedEthernet port sets a newstandard in the industry.

LORAIN® DB 484800Battery DistributionFuse/Circuit Breaker Bayfeaturing high capacity,front access, modularity,and simplified installation toeffectively providesecondary load distributionand protection for multiple -48 VDC feeds up to 600amps.

LORAIN® IS 6000Inverter System Compact modulardesign offersexpansion in 1kVAup to 6kVA

LORAIN® IS 3000Inverter System Stand alone rackmounted designoffers expansion in1kVA up to 3kVA

Inverter Systems120VAC and 230 VAC Single PhaseIdeal for a data center, wireless switching, orcentral office environment where flexibleexpansion capabilities are required.

DC Power Distribution Equipment

Monitoring Batteries &AccessoriesProducts frequently usedtogether with DC powersystems includingbatteries, battery strands,battery trays, bus covers,assorted panels, circuitbreakers and much more.

Enclosure SolutionsCustom designed or standard enclosures available for all types of dataand telecom equipment.

DC POWER SYSTEMS

EMERSON NETWORK POWER HAS A DC POWERSOLUTION FOR EVERY SIZE REQUIREMENT

Producing quality power is the first step—getting it to critical equipment in themost efficient manner while maintainingproper voltages and other key parametersis the important next step.

Making Sure The Power Is Always There When You Need It

Liebert’s range of power distribution

equipment is specially designed for

high-availability applications. It

includes both distribution and

switching systems to provide reliable

power to critical loads.

Liebert Power Distribution Solutions Are Ideal Forn Large-Scale Computer Centersn Facility-Wide Networksn Large-Scale Telecommunications Centersn Colocation Facilitiesn Internet Data Centersn Server Farmsn Data Warehousesn Network Management Centersn Medical Imaging Equipmentn Test and Laboratory Facilitiesn Industrial Process Control Operations

Po

we

r Distrib

utio

n S

yste

ms

32

POWER WHENAND WHEREYOU NEED IT

LIEBERT FDC

As your rack-based systems grow in number,

complexity and criticality — so must your

power distribution system. To meet this

challenge Liebert has created a product

designed to optimize power distribution at

the rack level with the “plug and play”

flexibility that today’s IT managers demand

from their systems. The Liebert FDC

distribution cabinet extends the functionality

of the PDU by packaging 168 poles in a stand-

alone cabinet with a rack foot print. Any

compartment can be serviced or reconfigured

without exposing the wiring of the other three

panelboards.

The standardLiebert FDCunit includes:n 4 complete

panelboards with

main breaker

(total 168 poles).n Front and rear

access only.n Bottom cable exit.

Optional features include:n Top cable exit.n 22kAIC main panelboard breakers.n Enhanced monitoring with remote

communications — Modbus output.n Isolated ground bus bars.n EZ-view doors enable visual inspection of

the breakers without unlocking the cabinet.n Square D or GE inline panelboards in bolt-in

or plug-in styles.n Current monitoring panel.n Tie-breakers to allow connection of two

panelboards to a common panelboard main

breaker (requires side access).n Plug-in main panelboard breakers.

33

Po

we

r Distrib

utio

n S

yste

ms

LIEBERT REMOTE DISTRIBUTION CABINET (RDC)

THE BETTER WAY TO WIRE HIGH DENSITY FACILITIES

The influx of client/server rack equipment is changing the content of data centers. There are more devices than

before—and they consume less power than their predecessors. As a result, most power distribution units (PDUs)

run out of circuit breaker poles before they run out of rated capacity. The Liebert Remote Distribution Cabinet

(RDC) extends the functionality of the PDU by packaging 168 poles (four complete 42-pole inline panelboards)

in a stand-alone cabinet.

Unlike standard Liebert Precision Power Centers (PPCs), the RDC has no internal isolation transformer and

requires 4-wire-plus-ground input from a PPC or other transformer. By separating the PPC transformer from the

panelboard function, Liebert was able to create an extremely compact package that fits the area of a standard

24” x 24” raised-floor tile.

The individual panelboards inside the Liebert Remote Distribution Cabinet can receive power from different

sources. This enables the RDC to provide fault-tolerant, fully maintainable dual-bus power to nearby load equipment.

A dual-input RDC can be configured with two panelboards on each side sharing common input terminals.

Other Features Of The Liebert RDC :n Unobstructed wiring access for ease of installation

n Complete isolation and maintainability

n Optional clear door insert panels enabling visual inspection

of the breakers without unlocking the cabinet

n Optional adjustable accent panels to make it easier to

compensate for breaker “creep”

n Single, dual or four-input configurations

n Optional current monitoring panel

n Optional input junction box and underfloor conduit box

n UL and CE compliant and labeled

Conduit-landing plate,above, is positionedfor easy cable access.Underfloor junction, inset,above right, is standardfor 4-input models andoptional for others.

34

Liebert Precision Power CenterThe Liebert Precision Power Center (PPC) power

conditioning and distribution cabinet is designed to bringyou a distribution system that offers the benefits of acustom-tailored power system, with the convenience andcost savings of a pre-packaged, factory-tested unit. Housedin a single, self-contained cabinet, it combines distribution,computer-grade grounding, isolation, and powermonitoring to provide the protection your vital computeror communications equipment demands. Available in 15-225 kVA capacity systems for raised floor applications and15-150 kVA capacities in top-exit models for non-raisedfloors, the Liebert PPC offers flexible expansion capabilitiesto fit growing sites.

The packaged system concept of the Liebert PPC isconvenient and space-saving, reducing installation timeand cost compared to a conventional approach usingmultiple interconnected components.

Other Standard Features Of The Liebert Precision Power Center :n Secure distribution and circuit identificationn Non-linear load compatibilityn Individual circuit breaker protectionn Built-in metering and alarm annunciation, with

communication to Liebert-centralized monitoring systemsn Easy installation, with single input cable connection

and application matched connections to the loadn Expandable with add-on panelboards and flexible cablingn Flexibility to protect your investment by allowing the unit

to be easily relocatedn UL and CSA Listed as a complete system

Liebert FPCThe Liebert FPC power conditioning and distribution

cabinet provides higher quality, more flexible powerdistribution for high-density data centers. It is engineeredto combine the convenience and cost savings of a pre-packaged, factory-tested unit with the flexibility of acustom-tailored power system. This self-contained systemprovides power isolation, power distribution, computer-grade grounding and power monitoring.

Ranging in capacity from 15kVA up to 300kVA, theLiebert FPC comes in a 19” rack and 47” wide rack, the sizeof two 19” racks, and is designed to fit at the end of, orwithin, a row of racks, as well as in a standaloneconfiguration.

The packaged system approach of the Liebert FPC isconvenient and space-saving, reducing installation timeand cost compared to a conventional approach usingmultiple interconnected components.

Other Standard Features Of The Liebert FPC:n Computer-grade groundingn Fully compatible with the non-linear loads n Main input breaker with shunt tripn Double-shielded isolation transformer n One or more individually enclosed 42-pole output

panelboardsn Built-in metering and alarm annunciation with

communication to Liebert centralized monitoringn Compact single cabinet conserves valuable floor spacen Single input cable connection reduces installation time

and costn Full front and rear accessn Can be easily relocated to protect your investmentn UL and ULc Listed as a complete system

LIEBERT PRECISION POWER CENTER — LIEBERT PPCLIEBERT FPC

PACKAGED POWER DISTRIBUTION FOR HIGHERPOWER QUALITY

The operation of the Liebert Precision Power Center and Liebert FPC canbe monitored using

n Liebert Nform™ Monitoring Systemn Liebert SiteScan® Web Comprehensive Facility Monitoring Systemn Liebert Universal Monitor and Remote Power Monitor Panelsn Third-Party Monitoring Systems



35

Po

we

r Distrib

utio

n S

yste

ms

LIEBERT SMARTSWITCH®

A SWITCHING SOLUTION FOR RELIABLE,REDUNDANT AC POWER

A Convenient Point-Of-Use Transfer Switch For A Variety Of Applications Requiring Reliable Dual AC Switching,

If your critical electronic equipment requires the reliability and continuous operation provided by dual power

sources—without tolerance for even scheduled downtime—Liebert has the solution. The Liebert SmartSwitch is

a convenient point-of-use transfer switch that provides rapid switching between two independent AC power

sources, for uninterrupted operation of critical electronic equipment.

It automatically transfers from the failing power source to the alternate source immediately upon detection

of a problem—typically within six milliseconds. The proven power switching technology of Liebert SmartSwitch

allows dual AC power paths all the way up to the critical load for the ultimate in AC power system redundancy,

power availability and fault tolerance.

Other Features Of The Liebert SmartSwitch:n Fast switching between two AC power sources makes

power transfer time invisible to your protected equipment

n Manual and automatic transfer capability

n Selectable preferred input source without rewiring

or load shutdown provides application flexibility and

facilitates load balancing

n Integral maintenance bypass to both input sources

for servicing convenience

n Hot-swap electronics allow module replacement

without load shutdown

n Switched neutrals maintain isolation of the separate

power sources and simplify grounding

n Break-Before-Make switching eliminates connecting

together of the independent power sources, even

under faulted conditions

n Diagnostics and transfer tests detect potential switch

failures before the problem becomes critical

n Output receptacles are available to match your load

specifications, simplifying system installation

n The enclosure may be placed under a raised floor, mounted

on a wall or used in a rack, based on your site needs

n ETL Listed to UL Standard 1008 for safety

n CE marked, complies with EMC and low voltage directives

The operation of the LiebertSmartSwitch can be monitored using




Liebert SmartSwitch includes manual transfer test capability toassure continued proper operation.

The unit is available with your choice of receptacles and connector, simplifyinginstallation and setup.

LED indicators provide at-a-glance operating status.Eight output contacts are available for remote status indication. RS232 ASCII communications port allows setpoint control and remote monitoring.

Hot swappable electronicsmodule and bypass featureallow your protected equipment to remain up and running, even when theSmartSwitch is being serviced.

36

LIEBERT STATIC TRANSFER SWITCH2™

THE KEY TO HIGH-AVAILABILITY POWERThe Liebert Static Transfer Switch2 (STS 2) provides an automatic, seamless transfer between the outputs of two

independent UPS systems and the input of a critical load in a dual-bus power system. If the primary UPS should fail,

the switch will automatically transfer the loads to the surviving UPS. For redundancy, the Liebert STS2 features three

separate, self-correcting logic modules. Each controller is capable of working independently and each helps monitor

the other two. Available in capacities ranging from 100 up to 1000 amps.

True Front-Access DesignAll mechanical and electronic components of the

Liebert STS2 are accessible from the front of the unit.

This gives you several immediate benefits:n Greater freedom in system design. The Liebert STS2 can

be placed adjacent to or in back of other equipment.

It can also be placed against a wall or partition.n Simplified installation, with ample space for cable

connections through top and bottom access platesn Less floor space required for maintenance access.n Simplified maintenance, with all key components

visible, serviceable and removable from the front

of the unit, without the need to shut down the

connected load.

True Internal RedundancyThe Liebert STS2 has triple-redundant logic. Each DSP

controller is capable of working independently, and each

helps monitor the other two. If one malfunctions, the other

two lock it out. Each controller has power feeds from both

power supplies.

The two power supplies feature true dual-bus power

distribution. Both have dual inputs, one from each AC input

source. All power connections have diode protection, so

that internal or external faults cannot propagate. The result

is a rugged, fault-resilient package that is optimized for

real-world applications.

Easy-To-Use Color Touch-Screen InterfaceThe controls of the Liebert STS2 are

intuitive and simple. The pop-up menus areeasy to understand and provide a wealth of operational and diagnostic information.

The color LCD monitor is divided intothree segments. In addition to a systemmimic diagram, there is a status/alarmpanel and a section dedicated to operatorinstructions and menus. You benefit from improved operator effectiveness,reduced training time, and less chance of operator error.

Other Features Of The Liebert Static Transfer Switch2:n Internal CANBUS protocol provides

high-bandwidth communication between

system components via twisted-pair cables.

Options can be added as simple network nodes

n Internal dual-bus control power

n Simplified installation and maintenance

n Full range of communications options to fit

any monitoring strategy

n Three-pole switch configurations

37

Po

we

r Distrib

utio

n S

yste

ms

The operation of the Liebert StaticTransfer Switch2 can be monitored using

n Liebert Nform™ Monitoring Systemn Liebert SiteScan® Web Comprehensive

Facility Monitoring Systemn Liebert Universal Monitor and Remote

Power Monitor Panelsn Third-Party Monitoring Systems



With a single, space-saving unit, the Liebert Static Transfer

Switch2/Power Distribution Unit combines the switching

capabilities of the STS2 with the benefits of a proven power

distribution unit.

Liebert designed the STS2/PDU to bring you a distribution system

that will close the power delivery loop in your critical facility. It offers

the benefits of a custom-tailored power system, with the convenience

and cost savings of a pre-packaged, factory-tested unit.

Housed in a single, self-contained cabinet, it combines distribution,

computer-grade grounding, isolation, and power monitoring, as well

as dual-source switching, to provide the protection your vital computer

or communications equipment demands.

Available in capacities from 250 to 800 amps, the Liebert STS2/PDU

offers flexible expansion capabilities to fit growing sites. The packaged

system approach of the Liebert STS2/PDU is convenient and space-saving,

reducing installation time and cost compared to a conventional

approach using multiple interconnected components.

Features of the LiebertSTS2/PDU include:n True dual-bus power distribution

switches automatically or manually

between two AC power sources.

n Computer-grade grounding

automatically establishes a single

point ground to meet major

manufacturers’ recommendations

and the requirements of the

National Electric Code.

n Fully compatible with the non-linear

loads of modern computer systems

and other electronic equipment.

n Built-in metering and alarm

annunciation with communication

to Liebert SiteScan® Web centralized

monitoring.

n Compact single cabinet conserves

valuable floorspace compared to

non-packaged solutions.

n Single cabinet design reduces

installation time and cost.

n The unit can be easily relocated to

protect your investment.

n UL Listed as a Complete System to

meet safety requirements for fast,

hassle-free inspection and building

code approvals.

n A choice of distribution options to

fit site requirements.

STS2/PDU COMBINESPOWER DISTRIBUTIONAND AUTOMATICSWITCHING

38

P OW E R Q UA L I T YSO LU T I O NS

Su

rge

Su

pp

ressio

n A

nd

Po

we

r Co

nd

ition

ing

Sy

stem

s

For applications requiring protection from electrical line problems without the need forback-up capability, Liebert manufactures a full line of surge suppression and power conditioning equipment.

The Best Possible PowerLiebert’s wide range of transient voltage

surge suppression (TVSS) products has

numerous applications throughout a facility,

including protection against transients that

are generated by other equipment within

the building. Our power conditioning

systems shield critical loads from external

disturbances, particularly those coming

through the utility power line.

Liebert Power Protection Solutions Are Ideal For:n Computer Centers

n Facility-Wide Networks

n Telecommunications Centers

n Colocation Facilities

n Internet Data Centers

n Network Management Centers

n Medical Imaging Equipment

n Test And Laboratory Facilities

n Industrial Operations

LIEBERT LARGE-SCALE SURGE PROTECTION

HIGH QUALITY SURGE PROTECTION

39

Su

rge

Pro

tectio

n A

nd

Po

we

r Co

nd

ition

ing

Sy

stem

s

AccuVar—A full line of multi-phase,

multi-mode distribution panel-mounted surge

suppression devices.

Hybrid Advantage—The first hybrid product

in the industry to offer a true coordinated

multi-stage system of suppression. Surge current

capacity ranges from 100 kA to 400 kA per phase.

Interceptor II TVSS Series—Built to provide the

highest level of surge current capacity, with the

lowest clamping voltages. Along with true NEMA

4 assembly suitable for outdoor use.

Interceptor ATF Series—A customized, modular

approach to surge protection in a series filter

device. The Interceptor Series utilizes MOV

(metal-oxide varistor) technology.

LM Series—Offers continuous protection from

damaging transients and electrical line noise,

and it has the industry’s highest surge current

repeatability. Surge suppression levels range

from 50 kA to 400 kA per phase.

Type SS—Approved by Motorola R56 Committee,

Standards and Guidelines for Communication

Sites—Type 1 and 2 Devices. Utilizes advanced

SAD/MOV array technology for industry leading

transient suppression voltages. Up to 160 kA surge

current capacity for increased reliability.

PanelGuard Extension—An add-on device for

integration with panelboards at the jobsite for

enhanced surge suppression. Surge current

capacity levels range from 130 kA to 200 kA

per phase.

Specialty Surge—is designed for data line,

telecommunications and other

specialty applications.

Liebert manufactures the industry’s widest range of transient voltage surge suppression (TVSS) equipment. These

products are ideal for small facilities, large equipment rooms or entire buildings. Plus a wide range of power, control and

data line applications. Each surge protection product features the rugged reliability that has been Liebert’s trademark

for more than 30 years.

Installing protection at the electrical service entrance, distribution points, branch panelboards and on specific sensitive

loads or equipment throughout your facility is the best way to prevent damage and eliminate associated downtime to

sensitive microprocessor-based electronics.

Islatrol® SP-6TVN Series—The Islatrol® SP-6TVN is a surge suppressor/filteringdevice that features uniquely designedrepositionable outlets and protects sensitive home/office equipment including home theaters, satellite dishes,computers, printers and faxes.

Islatrol® Rackmount Series—This line of ACsurge protectors is ideal for protecting thepower feeding valuable rack equipment. This series provides 40,000 Amps of surgeprotection and up to 60 dB of high-frequency noise filtering.

Edco Rackmount Series—The Edco RM-CAT6-16R is a 16-channel high-speed dataline protector that utilizes a three-stagehybrid design technology. Ideal for networkswitches and hubs, the Edco RM-CAT6-16R iseasily mounted in close proximity to the protected equipment.

Edco PC642 Series—The Edco PC642 Seriessurge suppressor is a two-pair (four-wire)module implementing three-stage hybridtechnology. This module addresses over-voltage transients with gas tubes and silicon avalanche components.

Edco LCDP Series—The Edco LCDP Series isdesigned to conveniently protect 8 wire, lowvoltage data circuits and employs two RJ-45jacks for easy installation.

Edco RJA-RJD Series—The Edco RJA and EdcoRJD Series are four pair telephone/data lineprotectors that implement advanced twostage hybrid design.

Edco CAT6-5 POE Series—The Edco CAT6-POE Series is designed to work on Category 5 Power-Over-Ethernet transmission lines aswell as Category 6 applications.

These Products Include:

The operation of the LiebertDatawave can be monitored using







LIEBERT DATAWAVE® MAGNETIC SYNTHESIZER

THE COMPREHENSIVE POWER CONDITIONING SOLUTION

Liebert Datawave Offers ManyOther Features:n Input voltage range exceeds ±40% to maintain

consistent power output quality even during

deep sag conditions

n Regenerated output waveform, immune to

input transients, distortion and noise

n Combines power conditioning, monitoring

and flexible output distribution from a single

factory tested unit

n Can be paralleled for additional capacity or

to provide redundancy

n Handles non-linear loads and high neutral

current without oversizing

n Can be paralleled for additional capacity

or redundancy

Liebert Datawave magnetic synthesizer makes a critical system virtually invulnerable to any form of power

distortion or disturbance except a total outage. The Liebert Datawave synthesizes and cleans three-phase output voltage,

regardless of input quality, providing transient voltage protection and harmonics isolation, even with non-linear loads

and distorted input voltages. The Liebert Datawave can maintain three-phase output voltage even if one input phase

drops off completely.

Regardless of the quality of input power, the Liebert Datawave generates a stable output waveform to distribute to

your sensitive electronic equipment. The self-contained system can be used to condition utility power, distribute it to

sensitive electronics and monitor power parameters. Systems are available from 15-200 kVA.

Integral PowerMonitoring PanelProvides comprehensivemetering and alarms forsystem power parameters

40

41

Su

rge

Su

pp

ressio

n A

nd

Po

we

r Co

nd

ition

ing

Sy

stem

s

LIEBERT ISOLATION TRANSFORMER

PACKAGED ISOLATION AND SURGE SUPPRESSION FOR SENSITIVE ELECTRONIC

SYSTEMS

Enhance the quality of your power distribution system with the Liebert Isolation Transformer. This packaged system

reduces common mode noise, while the internal surge suppression system minimizes high energy transients and normal

mode noise that can disrupt the operation of your sensitive electronic equipment. The Liebert Isolation Transformer

enhances conventional building power distribution systems, non-raised floor applications and electronic office systems

to improve power quality to a variety of equipment and applications. Available in sizes ranging from 15-300 kVA.

Other features of the LiebertIsolation Transformer:n Superior common mode noise attenuation of

140 dB is achieved with double-shielded copper

isolation transformersn Suppresses high-speed, high-energy transients

and high-frequency noise in the normal moden K-rated transformers available for additional

non-linear load capabilityn Voltage compensation taps allow compensation

of +5% to –10% without deratingn Establishes a single point ground for proper

computer operationn High quality, all copper windings provide high

efficiency and long service life

42

What You Don’t Know Can Hurt You A small problem in a critical facility can quickly

escalate into a disaster—knowing what is happening

with your power equipment, so you can keep that

protective “envelope” at peak operating efficiency, is

vital to system reliability.

Different People Need To KnowDifferent Things

Liebert offers you more monitoring solutions than

anyone else because getting the right information about

your power equipment to the right people—with the right

level of urgency—is so important to system availability.

We do this by allowing you to receive and use

information from your Liebert power equipment’s

microprocessor controls…no matter where it is located

or what communications protocol, operating platform

or building management system is being used. In-band,

out-of-band and web-based monitoring are all available.

From enterprise monitoring systems to individual pieces

of communications hardware, you will know the exact

problem so that you can implement the right solution.

POWER SYSTEM MONITORING: THE KEY TOCONTINUOUS OPERATION

How Deep Does Your MonitoringNeed To Be?

Monitoring can range from a automated shutdown

software that provides basic operating information

from a single UPS unit—all the way to full-scale

monitoring and control of a critical facility including

trending and data analysis.

Your requirements will vary according to the

specificity of the information you need. You may

require no more than a local readout of a unit’s

operating status. Or you may need the ability to

control its operation and receive alarms.

These information requirements may also go

beyond basic monitoring and control. You may need

the ability to analyze performance data in order to

pinpoint trouble spots so that the same problems

don’t happen again and again.

MAXIMIZING YOUR INVESTMENT THROUGH ADAPTIVE MONITORING

Distributed Managementwith Liebert IntelliSlotInterface CardsFor enchanced remote communicationsand control of your Liebert units, the Liebert IntelliSlot Web and 485Cards deliver the communicationcapabilities you require.

Monitoring and control throughyour existing Network with noadditional software required.

Each Liebert system equipped with anLiebert IntelliSlot Web Card takes fulladvantage of your Ethernet network,allowing remote monitoring fromyour computer desktop, networkoperations center or wherever networkaccess is permitted, without the needfor front-end software.

Monitoring integration withyour existing BuildingManagement System.

A Liebert system equipped with aLiebert IntelliSlot™ 485 Card can beseamlessly integrated with yourexisting Building ManagementSystem.

Centralized Managementwith Liebert Nform®

SoftwareAs business grows, your criticalequipment infrastructure willexpand, thus the need for centralizedmanagement of this equipment will be key to your business success.Connecting to equipment in thedistributed critical space is only part of the monitoring challenge.

Liebert Nform leverages the network connectivity capabilitiesof your Liebert equipment to provide a centralized monitoringview of your distributed equipment.

Utilizing the SNMP and Web technologies built into each of theLiebert IntelliSlot communicationcards, Liebert Nform will centrallymanage alarm notifications toprovide you with an easy interfaceto access critical status information.Liebert Nform puts critical systems information at the fingertips of support personnel—wherever theyare—increasing responsiveness to alarm-event conditions, thusallowing IT organizations to maximize their system availability.

Liebert SiteScan Web

Enterprise Managementwith Liebert SiteScan®

Web SoftwareFor customers who require extensivemanagement of critical systemequipment that may span multiplelocations in an ever-moving globalenterprise, Liebert SiteScan Web will centrally manage your criticalequipment and give you the power to move beyond the event-responsiveservice paradigm.

Liebert SiteScan Web does it all —

Real-Time Monitoring and Control

Event Management and Reporting

Data Analysis and Trending

Building Management Integration

Liebert SiteScan Web is acomprehensive critical systemsmanagement solution dedicated toensuring reliability through graphics,event management and dataextrapolation. The standard Webinterface allows users easy access from anywhere at anytime.

Single and multi-site applications.Event management and unit control.Trend and historical data capturesand reporting.Full ASHRAE BACnet compatibility.Java based.Windows 2000, XP and 2003 compatible.

Liebert Nform

Liebert IntelliSlot Web

Mo

nito

ring

43

Making Sure You Always Get The Right Solution

There are many places where Liebert equipment is vital—

such as computer rooms, telecommunications centers,

high density Internet hosting sites, colocation facilities and

industrial control rooms. Our application engineers are

experienced in all of these situations and can make sure

you always get a power protection solution that is tailored

to your exact needs.

EXCELLENCE IN EVERY ASPECT OF DOINGBUSINESS…THAT IS THE LIEBERT EXPERIENCE

44

Doing Whatever It Takes To Meet The Needs Of Our Customers

Liebert has been safeguarding computer operations and

other critical facilities for over 35 years. No other company

in this business has a track record that is so solid. Everything

we do is focused towards you…the customer. The Liebert

design and manufacturing philosophy covers every aspect

of the product from advanced engineering…to providing

detailed equipment drawings…to manufacturing quality

in our ISO 9000—2001 certified production facilities…to

assuring on-time delivery.

It takes an innovative product, built to quality standards and properly specified to precisely meet each individual power protection application.

No one in the power protection industry offers you a broader range of solutions than Liebert. From one-on-one

protection for a single PC to full UPS coverage for an entire facility, we can help you develop the power solution

that is exactly right for your needs and your budget.

From our first meeting, Liebert’s goal is to help you solve your current and future power problems with a protection

plan that is designed specifically for your parameters. No overly simplified “out-of-the-box” answer can truly provide

optimum protection for complex computing and communications systems.

30 yearsover

100 countriesover

45

A Strong Local PresencePurchasing from Liebert is different from what you

might experience with other companies that sell power

protection products. Your local Liebert Representative,

Distributor or Reseller is your direct connection to our

full complement of critical power solutions. You can

always be sure that you are dealing with someone who

knows the answers and is fully capable of implementing

them on your behalf.

Someone There To Help Keep You UpAnd Running

After you purchase your Liebert power protection

product, there will always be someone you can talk to

who will answer any questions or operational problems

you may have. Through Liebert Global Services, we are

committed to providing comprehensive service training

programs to all of our service engineers and technicians.

It’s important to know that whether it’s scheduled

preventive maintenance…or an emergency situation,

service support will be quickly and expertly handled.

A Company You Can Count On…Year After Year

With your purchase of a Liebert power product, you

are aligning yourself with an organization that has a

reputation for quality that is second to none. The

Liebert name is recognized around the world. It is

synonymous with reliability. Our customer base includes

most of the world’s major corporations, institutions and

government agencies.

But, most importantly, your Liebert product provides

significant value—a product that continues to pay

dividends with year after year of reliable operation.

We also help lower your overall cost of ownership by

delivering cost-effective support with tools such as our

extensive online information resources, toll-free product

help lines, training programs and other capabilities.

Commitment to

Quality

35,000 customersover

46

SERVICING ALL OF YOURCRITICAL POWER EQUIPMENT

We Have The PartsTo make sure the job gets done when it needs to, we have

the most factory-certified parts—and the most

sophisticated logistics system—to get them wherever

they’re needed. You won’t wait on parts to get your system

up and running, because nearly 100% of emergency parts

orders are delivered in less than 24 hours.

The power equipment we service includes:n All UPS and Batteries

n Automatic Transfer Switch

n Static Transfer Switch

n System Control Cabinets

n PDUs

n Bypass Cabinets

nPower Conditioning & Distribution

Your power equipment functions as a complete system.

Shouldn't your service provider? Only Emerson Network

Power has the expertise and experience to service your

entire power infrastructure and all its components-from

utility to rack.

We Have The ResourcesOur Customer Resolution Center supports you

24x7x365. It’s always staffed by knowledgeable people

who understand the technology and your equipment. No

messages. No answering services. We handle over

100,000 calls per year, and resolve them in an average

time of 2.5 minutes.

We Have The PeopleEmerson Network Power has the coverage and the

capabilities to get you through just about anything. We

have the most and the best factory-trained Field

Technicians in the industry — over 375 of them located

across the country. What’s that mean to you? Our average

onsite response time in 2006 was just 1.97 hours.

Your investment in power equipment is worthless if you don’t maintain it. Not even the best equipment can function

properly unless it’s serviced with a regular maintenance schedule.

Emerson Network Power services the complete spectrum of UPS, batteries and related power distribution equipment

in your data center or in other critical facilities where continuous availability of systems is essential.

Should downtime strike, no one can you get you back online more quickly than Emerson Network Power.

Liebert Integrated Racks And Cabinets —Protection Wherever It’s Needed

Rack-based equipment has formed the foundation of today’s

IT network. To house and protect these systems, Liebert offers

a complete line of rack, cabinets and integrated protection

enclosures for rack-mounted components. From open racks

employed in large data centers to self-contained, integrated

enclosures with cooling and power protection used in remote

locations, there is a Liebert rack solution for every application.

Monitoring Solutions From Liebert — The SmartDecision To Make

Liebert is the only source that supplies the protection

infrastructure and all the tools you need to know how it is

operating every minute of every day.

From one-on-one supervision of a single piece of equipment

to full-scale monitoring and control of several far-flung

facilities, no one knows more about what it takes to keep you

in the know about your critical systems than Liebert.

You Know About Our Complete Line Of Power Protection Solutions

A steady flow of power, and the means to get it to each piece

of equipment in a critical facility, is a key to systems reliability.

The proper functioning of these systems depends on the

quality of power and the ability to ride through outages of any

duration. Only Liebert offers the breadth of power supply

products to meet any of these needs.

Power availability solutions include uninterruptible power

supply (UPS) systems from 300 VA to over 1000 kVA.

Power protection products include surge protection and

power conditioning systems up to 300 kVA.

Power conversion and distribution systems for both AC

and DC power applications range from 15 kVA to 225 kVA.

Liebert Offers A Full Range Of Environmental Control Systems

From high-capacity mission-critical cooling systems — to

compact and above-ceiling units — to our targeted cooling

products designed for the demanding requirements of high

density electronic installations… there is a Liebert solution

designed to cool and protect your critical computing and

communications equipment. We make the industry’s widest

range of mission-critical environmental control, including air

conditioners, fluid chillers and heat rejection systems from 1.0

to more than 60 tons, in a variety of configurations and

cooling technologies.

Power Availability And Protection

Power Conversion And Distribution Monitoring And Communication

Integrated Racks And Cabinets

High Heat Density And Precision Cooling

Liebert: The World Leader In Mission-CriticalPower And Cooling Technologies

47

Emerson Network Power.The global leader in enabling Business-Critical Continuity™.

EmersonNetworkPower.com

AC Power

Connectivity

DC Power

Embedded Computing

Embedded Power

Monitoring

Outside Plant

Power Switching & Controls

Racks & Integrated Cabinets

Services

Precision Cooling Surge Protection

Liebert Corporation1050 Dearborn DriveP.O. Box 29186Columbus, Ohio 43229800 877 9222 Phone (U.S. & Canada Only)614 888 0246 Phone (Outside U.S.)614 841 6022 FAX

Via Leonardo Da Vinci 8Zona Industriale Tognana 35028 Piove Di Sacco (PD)Italy39 049 9719 111 Phone 39 049 5841 257 FAX

Emerson Network Power Asia Pacific7/F., Dah Sing Financial Centre108 Gloucester Rd, WanchaiHong Kong852 25722201 Phone 852 28029250 FAX

liebert.com

24 x 7 Tech Support800 222 5877 Phone614 841 6755 (outside U.S.)

Business-Critical Continuity, Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2007 Emerson Electric Co.

While every precaution has been taken to ensure accuracy and completeness in this literature, Liebert Corporation assumes noresponsibility, and disclaims all liability for damages resultingfrom use of this information or for any errors or omissions.

© 2007 Liebert Corporation. All rights reserved throughout the world. Specifications subject to change without notice.

All names referred to are trademarks or registered trademarksof their respective owners.

® Liebert and the Liebert logo are registered trademarks of the Liebert Corporation.

SL-70100 (R11/07) Printed in USA

Ensuring The High Availability OfMission-Critical Data And Applications.

Emerson Network Power, the global leader in enabling business-critical continuity,

ensures network resiliency and adaptability through a family of technologies —

including Liebert power and cooling technologies — that protect and support

business-critical systems. Liebert solutions employ an adaptive architecture that

responds to changes in criticality, density and capacity. Enterprises benefit

from greater IT system availability, operational flexibility, and reduced capital

equipment and operating costs.

Documents

emerson