Upload
covalciuc-bogdan
View
193
Download
32
Embed Size (px)
DESCRIPTION
Holmatro Catalogue
Citation preview
-
www.holmatro.com
Holmatro USAGlen Burnie, MD, U.S.A.Manufacturing, sales & service
Holmatro NetherlandsRescue equipmentRaamsdonksveer, The NetherlandsT +31 (0)162 58 92 00E [email protected], sales & service
Holmatro GroupWorld HeadquartersRaamsdonksveer, The Netherlands
Holmatro UKNottingham, UKSales & service
Holmatro ChinaSuzhou, Jiangsu Province, ChinaSales & service
Holmatro PolandWarsaw, PolandSales & service
Holmatro Poland
HolmatroCatalogue
©Holmatro 0614.06 980.000.160
Resc
ue equipm
entH
olm
atro
Catalogue
2Contents
Page INTRODUCTION
5 About Holmatro
6 About Holmatro Rescue Equipment
7 - 11 Holmatro users worldwide
12 - 13 Quality in everything we do
14 - 16 The power of innovation
17 Reliability
18 - 19 Facilities
20 - 21 Training and training materials
22 - 25 CORE Technology
26 - 27 Features / Benefi ts
28 - 31 NCT - New Car Technology
1. CUTTERS
32 - 33 1.1 Cutters NCT II
34 - 39 1.2 Cutters GP
2. SPREADERS
40 - 43 2.1 Spreaders
3. COMBI TOOLS
44 - 45 3.1 Combi tools / sets 4000 series
46 - 47 3.2 Combi tools 5000 series
4. RAMS
48 - 49 4.1 Rams - 10 tons - single plunger
50 - 51 4.2 Rams - 16 tons - single plunger
52 - 53 4.3 Rams - 16 tons - double plunger
54 - 55 4.4 Rams - 16 tons - accessories
56 - 57 4.5 Rams - telescopic plunger
58 - 59 4.6 Rams - Extendo
5. PUMPS
60 - 61 5.1 Motor pumps - Battery driven Greenline
62 - 63 5.2 Motor pumps - Personal Power
64 - 65 Motor pumps - Personal Power - Duo
66 5.3 Quick Fix & Release Brackets
67 5.4 Motor pumps - Spider Range - SR 10-series
68 - 69 5.5 Motor pumps - Spider Range - SR 20-series
70 - 71 5.6 Motor pumps - Spider Range - SR 30-series
72 - 73 5.7 Motor pumps - Spider Range - SR 40-series
74 5.8 Motor pumps - Diesel / Air driven
75 5.9 Motor pumps - DPU 60-series - Duo
76 5.10 Motor pumps - MPU 60-series - Trio
77 5.11 Hand pumps - 3-stage
78 - 79 Hand/foot pumps - 2-stage
2143
Important safety notice This catalogue contains information on rescue tools and rescue techniques that can be employed in different rescue operations. The situations shown in this catalogue are examples only and merely meant to assist the user of this catalogue in understanding certain basic rescue techniques and rescue tools available.
Holmatro disclaims any liability for any damage or injury, whether direct, indirect or otherwise, and whether asserted in contract, tort, warranty or otherwise, incurred as a result of the use of rescue techniques and/or rescue tools described in this catalogue or the use of any other rescue techniques and/or rescue tools that are employed in any training or emergency situation, except to the extent, and limited to, the terms of any warranty provided by Holmatro for its own equipment. Holmatro makes no warranty, expressed or implied, with respect to its own equipment from the contents of this catalogue, including without limitation, any warranty of merchantability or warranty of fi tness for a particular purpose.
DisclaimerWhile the greatest care has been devoted to the content, it is possible that the information in this printed matter is incorrect or incomplete. N.V. Holmatro and its affi liated companies (hereafter: Holmatro) cannot be held liable in any way for the consequences of activities undertaken on the basis of this printed matter. If you have any doubts about the correctness or completeness of the information, you shall contact Holmatro (phone number: +31 (0)162-589200).
Nothing from this printed matter can be copied and/or made public in any way without the explicit authorisation of Holmatro.
3Contents
Page 6. HOSES / HOSE REELS
80 6.1 CORE Technology - features
81 6.2 Hoses / hose reels - CORE
82 Electric hose reels - CORE
83 6.3 Hoses / hose reels - dual
7. RESCUE SETS
84 7.1 Basic Rapid Intervention set
85 7.2 Basic Medium Rescue set
86 - 87 7.3 Advanced Medium Rescue set
88 - 89 7.4 Heavy Duty Rescue set
8. SELF CONTAINED TOOLS
90 8.1 Hand-operated cutter
91 - 93 8.2 Hand-operated combi tools
94 8.3 Hand-operated Power Wedge
95 8.4 Greenline battery driven cutters
96 8.5 Greenline battery driven spreader
97 8.6 Greenline battery driven rams
98 - 99 8.7 Greenline battery driven combi tools
9. VARIOUS RESCUE TOOLS
100 - 102 9.1 Door openers
103 9.2 Concrete crushers
104 9.3 Special materials cutters
105 9.4 Minicutter
106 9.5 Power wedge
107 9.6 Pipe squeezer
108 9.7 Cable cutters
109 9.8 Toe jack
110 9.9 Aluminium jacks
111 9.10 Hydraulic jack set
10. ASSIST TOOLS
112 10.1 Chocks & Blocks
113 - 114 10.2 Ram supports
115 10.3 Rim Adapter
116 10.4 Vehicle stabilization strut
117 10.5 Rescue support bag
118 - 119 10.6 Glas-Master, glass cutter, Secunet airbag safety cover,
Safetypen, hose binder, protection shield
120 - 121 10.7 Sharp edge protection covers, tool stations
Sharp edge protection blanket
44
Photos in this catalogue courtesy of:
Jeffrey Koper: photographer fi re brigade Haarlemmermeer (the Netherlands)
Jeroen Stuve and Erwin de Haan: www.brandweerspotters.nl
and all our worldwide dealers
Page 11. PNEUMATIC LIFTING BAGS & SEALING SYSTEMS
122 - 123 11.1 High pressure lifting Bags HLB
124 - 125 High pressure lifting Bags HLB - advisory sets
126 11.2 Low pressure lifting bags LAB
127 11.3 Tank sealing system HLS
128 11.4 Leak sealing system HVSP
12. POWERSHORE
129 - 130 12.1 Introduction
131 - 132 12.2 Products
133 - 134 12.3 Features / Benefi ts
135 12.4 Mechanical Shoring Sets
136 Hydraulic shoring sets
137 Pneumatic shoring sets
138 Combined shoring sets
139 Trench shoring sets
13. SERVICE
140 - 141 13.1 Lubricants, testing equipment,
handles with LED lights,
sets of blades
14. Holmatro Online
142 14.1 Holmatro.com
Holmatro Rescue World
Holmatro Rescue Blog
Contents
55About Holmatro
Holmatro develops, produces and sells hydraulic tools and systems for rescue services and industrial applications. These activities
take place in two divisions:
Rescue Equipment Industrial Equipment
Holmatro continuously invests in research and development of new products and is world renowned as a specialist in high pressure
hydraulics. Our high-quality products are considered amongst the best available.
Besides the head offi ce in the Netherlands, Holmatro has manufacturing plants and sales offi ces in the Netherlands and the United
States and representative offi ces in the United Kingdom, Poland and in the Peoples Republic of China. Our worldwide dealer
network guarantees perfect after sales service for all our products.
Worldwide dealer network in over 120 countries
Holmatro USA
Holmatro GroupHolmatro Netherlands
Holmatro ChinaHolmatro Poland
Holmatro UK
66About Holmatro Rescue Equipment
Innovation
Throughout the years Holmatro has been at the forefront of
technological developments. Continuous market research
and in-house research & development have led to many
revolutionary innovations.
Quality
More than any other equipment, rescue tools must be reliable
and perform well under all circumstances. That is why both
our company and our products meet the highest quality and
performance standards:
- ISO 9001 company accreditation since 1992
- only UL-listed rescue tool brand in USA as of 1993
- complies with the European EN 13204 norms and the
American NFPA 1936 where applicable.
- our pneumatic lifting bags systems comply with EN 13731
Success
By developing innovative, reliable and high-quality rescue
equipment we contribute to the daily successes of rescuers in
performing their critical, live-saving tasks.
Core values in the Holmatro philosophy
Mastering power
Mastering power is at the heart of Holmatro’s vision. Common
to all our products is the basic premise that only harnessed
power can be used effectively. Holmatro rescue tools allow
rescuers to apply the high forces generated by the equipment
in a practical, controlled and safe way.
We develop, manufacture, sell and service high pressure hydraulic, pneumatic and mechanical rescue equipment. We supply our products and services to fi re and rescue organizations worldwide through a comprehensive dealer network covering all continents.
7
Indonesia Romania Qatar
Turkey People's Republic of China Philippines
Ukraine
The Netherlands Malaysia
Holmatro users worldwide
England Australia
For more users see www.holmatro.com
8
Peru
Portugal
Poland
Belgium France Lithuania
Bangladesh
Hong Kong
Sweden
For more users see www.holmatro.com
Holmatro users worldwide
Argentina
9
Russia
Australia
South Africa
Germany
Colombia Croatia
For more users see www.holmatro.com
Holmatro users worldwide
10
Switzerland Spain
Japan Sweden The Netherlands
Zimbabwe Brunei United States of America
ItalyNew Zealand
IrelandAustria
Botswana
Czech Republic
For more users see www.holmatro.com
Holmatro users worldwide
Germany
Philippines
Spain
The Netherlands
Ghana
Chile
Philippines
The Netherlands
SwedenSpain Ghana
Germany
Chile
11
For more users see www.holmatro.com
Holmatro users worldwide
12Quality in everything we do
Our organization
At Holmatro we work according to the ISO 9001 Quality
Management Standard. A certifi cation body accredited by the
Dutch Accreditation Council audits us twice a year. In 1992
Holmatro was one of the fi rst industries obtaining the ISO 9001
qualifi cation.
Our production process
From the fi rst test on the raw material until the fi nal test of the
individual parts every product is tested in each phase of its
production.
Our assembly
Each product is tested by its assembler and later on by our
Quality Department.
Each individual hose assembly is tested at 1440 bar (2 times
its working pressure).
13Quality in everything we do
Our products
Holmatro products comply with all international standards
such as the European EN 13204, EN 13731 and the American
NFPA 1936 norms. Products are tested and certifi ed by an
independent test institute.
Our human resources
Continuous internal and external training of all our employees.
Our worldwide dealer service network
Regular technical training for our dealers on various service
levels.
Our training material
Training book, interactive app (for ipad and android) and poster
series on Vehicle Extrication Techniques.
Training book and a series of 5 posters on Emergency Shoring
& Lifting Techniques.
All publications are available in numerous languages
14
1993
Introduction of the Holmatro
Personal Power concept for
improved ergonomics: one
man, one pump, one tool.
1998
First hydraulic cutter in the high-performance H-category (EN
13204), in anticipation of new developments in the automotive
industry.
The power of innovation
Some of Holmatro’s innovations1975
First manufacturer to introduce hydraulic rescue tools operating
on a pressure higher than 500 bar. The birth of more compact
and lightweight hydraulic rescue tools.
1983
First lightweight spreader, less than 19 kg.
For easier handling and carrying.
1977
Introduction of the dead man’s handle. From this time on a
uniform, ergonomic and controllable operation was possible.
dead man's handle
1984
First ram with twin plungers.
Creation of a double
spreading length without risk
of bending a long plunger.
1985
First lightweight combi tool. For easier handling and carrying.
1986
First lightweight (<13 kg) cutter with a relatively large blade
opening (125 mm) and more cutting power.
1990
First twin-plunger 16 tons ram.
Throughout decades Holmatro is investing over 4% of its turnover in Research & Development. That is why from the
beginning Holmatro has been at the forefront of technological developments in the fi eld of hydraulic rescue equipment.
You can be assured that we will continue this policy and that our future developments will enable you as a rescuer to do
your demanding job in an even quicker, safer and easier way.
1515
2008
Introduction of a cutter for
various special, extra hard
materials: SMC 4006 (C)
2009
First NCT cutter with blade opening >
200 mm and cutting
force > 100 tons.
The power of innovation
1999
First automatic locking
hydraulic coupler for safer
working conditions.
1999
Introduction of hydraulic
shoring struts allowing a
combination of shoring
and lifting: Holmatro
PowerShore™.
2000
Introduction of the fi rst low-
weight (15.5 kg) pump based on
the Personal Power concept.
2002
First cutters with NCT (New Car Technology) blades. Especially
designed to cut hard materials and reinforced constructions of
modern cars.
2002
First high-performance
cordless, compact, low-
weight battery-operated
rescue tools (< 15 kg incl.
battery).
2003
First duo pump with a ready-for-
use weight under 25 kg. Portable
by one man.
2005
The world’s fi rst pump with
ECO-switch.
Environmentally friendly.
2005
Holmatro introduces its
revolutionary single hose
CORE Technology. A
turning point in rescue
tool technology for
safer, easier and quicker
working.
2005
First rescue tools with integrated lighting
2005
Introduction of i-Bolt Technology on cutters and combi tools for
a more effi cient cutting process and fl atter design
traditional bolt construction i-Bolt construction
2005
Introduction of Speed Valve on spreaders and rams for faster
opening of tools
2010
Concrete breaker that breaks
up large, thick pieces of
concrete to provide access
into collapsed structures.
16The power of innovation
2010
Holmatro introduces a brand new concept for rams combining
manual and hydraulic extension. To bridge gaps quicker and
with more precision.
2010
First hand operated power wedge. Extremely portable and
ready for immediate use.
2010
Personal Power pump with
3-stage pump technology.
2013
Greenline battery pump.
First emission-free pump for
use anywhere in any rescue
operation.
2013
Spider range pumps.
Complete range of petrol,
electric and diesel driven
3-stage pumps.
2014
Ultra-light weight and extreme compact yet high performance
combi tools.combi tools.
2013
Unique auto-lock stabilization system
2014
Complete line of Greenline battery driven cutters, spreaders,
combi tools and rams.
17Reliability
Reliable performance
Trying to save human lives means working under extreme
stress. Rescue tools, more than any other type of equipment,
must perform well under all circumstances. Both the rescue
tools and the working environment they create must be 100%
reliable.
40 years of experience
Our over 40 years of experience in high pressure hydraulics,
our in-house Research & Development, the international norms
Holmatro rescue tools meet, our ISO 9001 certifi cation and
our general quality concept give you the confi rmation of the
reliability of Holmatro rescue tools.
10
6
7
8
9
18
1. Incoming raw materials2. Production halls3. Production warehouse4. Assembly5. Warehouse fi nished products6. Shipping department7. After sales service8. Training centre9. R&D10. Sales and administration
Holmatro Rescue Equipment B.V.Physical address:
Zalmweg 304941 VX RaamsdonksveerThe Netherlands
T +31 (0)162 589 200 E [email protected]
Facilities
1
2
3
2
9
5
4
10
3
1919Facilities
20
Subjects in the book include:• Safety• The Vehicle• Tools and Equipment• The Team Approach• At the Scene
Other topics are: Rescue at Night, Extrication near Water, Training, Multi Agency Working and more.
The interactive Holmatro Vehicle Extrication app is based on the training material in the book. It promotes a safe, methodical and casualty centred approach to the extrication of persons following road traffic accidents. The app explains in detail the most common technical rescue techniques, illustrated by 60 videos showing you how to perform the procedures. In addition, the app highlights key medical considerations and guides the rescuer through the process of efficient extrication planning.
A new poster series explaining and illustrating various vehicle extrication techniques is available as well.
Training and training materials
Power alone is not enough. Holmatro knows it takes more than the world's best rescue tools to save lives. Rescue in general is a very challenging discipline requiring ongoing training and skills development. To support rescuers faced with this continuous challenge we have developed various training materials in a variety of languages. Holmatro and its dealers also regularly organise training sessions for end users.
This richly illustrated 256-page hard cover training book, written by Holmatro Rescue Consultant Ian Dunbar, promotes a safe, methodical and casualty centred approach to the extrication of persons following a road traffic collision. Not only does it cover rescue tools and techniques, it also highlights key medical considerations and guides the rescuer through the process of efficient extrication planning.
All vehicle extrication techniques described in the book are illustrated by pictures and have QR codes referring to videos on YouTube showing how to perform these procedures.
This book has been written for rescuers of all levels of experience, to be used as a resource and a basis for training and development. Containing the most relevant and up to date information available, the aims of the book are to:
• Promote a safe and systematic approach to the rescue of persons who are trapped following a road traffic collision• Explain the concept of extrication planning• Explain techniques that may be used during the extrication process• Introduce the rescuer to some key basic medical considerations
All vehicle extrication techniques in the book are illustrated by pictures and have QR codes referring to videos on YouTube, showing you how to perform these procedures.
Training book with links to instruction videos App
Posters
VEHICLE EXTRICATION TECHNIQUES
2121Training and training materials
A richly illustrated training book and series of 5 posters on
equipment handling and techniques for use in emergency
shoring & lifting operations.
Holmatro can provide product, application and basic tool
handling training tailored to your requirements. Usually
these trainings are a mix of theory (classroom sessions) and
practice (hands-on sessions). We are often able to help you
with this training ourselves and if not we can always provide
you with information about training institutes. Holmatro shares
information and works together with various professional
training institutes around the world.
Poster series,dimensions 70 x 50 cm.
100-page training book.
Training
Holmatro's Emergency Shoring & Lifting Techniques
2222CORE Technology
What is CORE Technology?
CORE Technology (Coaxial Rescue Equipment Technology)
refers to the hoses, couplers and valves of a rescue system. In
other words the way hydraulic oil is directed from the pump to
the tool and vice versa. A traditional dual hose system consists
of a separate pressure and return hose connecting pump and
rescue tool. A CORE system consists of a high pressure inner
hose inside a low pressure outer hose. The hydraulic principle
and tool performance of CORE Technology and traditional
technology are of course identical.
Why CORE Technology?
CORE Technology is a revolutionary turning point in rescue tool
technology and defi nitely more than a new piece of equipment.
It allows you, as a rescuer, to rethink and simplify your extrication
techniques and your standard operating procedures. Once
working with CORE, you will discover the unprecedented benefi ts
CORE offers. Compared to working with a traditional system,
working with CORE is:
Safer
Easier & Quicker
- saves time, is more user-friendly and allows
more effi cient use of manpower
CORE Technology Traditional dual hose
CORE Technology, the next major step forward1965 - 1975 introduction of hydraulics in the fi eld of
extrication
1975 - 1985 technical shift towards high pressure
1985 - 2005 shift to a more patient-orientated
rescue
2005 introduction of CORE Technology
2323
CORE
CORE Technology
- increased safety for the rescuer; high pressure hose protected by low pressure hose
low pressure return hose
high pressure hose
return oil
max. 720 bar max. 25 bar
- no risk of kinking or pinholes
- one step auto-lock coupler
- two step uncoupling system
- accidental uncoupling impossible during operation
- couples and locks in just one push
Dual - steel reinforced
One hose system (hose in hose) - protected power
Para-aramid fi ber reinforced hoses (no steel)
- 4:1 safety ratio for both
pressure and return lines
- according to EN 13204
and NFPA 1936
According to all international safety norms
- all testing according to every appropriate safety norm
Hose testing
Maintenance friendly
- less couplers
- less hoses
- no pigtail hoses on tools
- no valves on pumps
Safety couplers
Safer
24CORE Technology
Para-aramid reinforced hoses
- lightweight
CORE Technology hose: about 40% weight reduction
traditional steel reinforced hoses
- no kinking
- easy to handle / manoeuvre
- easy to roll and unroll
- all hoses with standard hose binders for
easy storing
Simple set up Changing tools under fl ow during use
- connect CORE hose to pump or tool with or without pump running - changing of tools at any time without the need for release valve on pump
- saving precious manpower
Easier & Quicker
25
360 º
360 º
spacesaved
CORE Technology
One hand coupling
- end of hose grips at both hose ends
Unique CORE couplers
- 360° rotating couplers on tool and on pump; no hose
entanglement
- maintenance friendly fl at face couplers
- no dirt inside couplers
- easy to clean
Coupler mounted directly on the tools
- no pigtail hoses necessary - compact so space saving in rescue vehicle
- tool couplers not lying in the dirt - no swinging pigtail hoses
- (dis-)connecting tool with one hand while standing
Dual hoses CORE Technology
Easier & Quicker
2626Features / Benefits
The following innovative features are standard on almost all Holmatro rescue tools, both with CORE Technology and with traditional dual hoses.
- standard on almost all Holmatro cutters, combi tools and
spreaders
- never work in your own shadow again, neither at night or
during daytime when bright sunshine can cause dark shady
areas
- the 4 integrated LED lights also provide illumination in those
cases where rescue scene lighting is absent (e.g. certain
rapid interventions situations)
- on one standard AA battery, the LED's work 12 hours
continuously
- the battery can be replaced in less than 60 seconds
The new revolutionary central bolt construction
- standard on all Holmatro cutters and combi tools
- the i-Bolt is sunk into the blade holder; this results in a
much fl atter design which provides better access in narrow
spaces
- the blades are squeezed together directly. This as opposed to
conventional bolt constructions where the bolt sits on top of
the blade holder and squeezes the (‘softer’) aluminium blade
holder together, with the blades in between. i-Bolt Technology
therefore results in less blade separation and a more effi cient
cutting process. A cutter with i-Bolt Technology outperforms
an identical cutter with a conventional bolt construction.
- the bolt and blade holder are protected by a stainless steel
cover. Direct damage of bolt and blade holder during an
extrication process is therefore no longer possible.
traditional bolt construction new i-Bolt construction
Carrying handles with integrated lighting
i-Bolt Technology
Squeezes (“softer” aluminium) blade holder. Blades are squeezed indirectly only.
Squeezes blades directly for a superior cutting performance.
2727
0 0
Features / Benefits
-standard on all Holmatro spreaders and rams
-with the Speed Valve tools open up signifi cantly faster at
pressures below 150 bar. This allows for faster more effi cient
tool placement, thus shortening the duration of the extrication
time required. At 150 bar working pressure the valve
automatically reduces the opening speed back to ‘normal’ to
ensure a controlled and safe extrication process. The control
handle of course allows for accurate and proportional opening
and closing at both high and low speeds.
150 bar
Opening times spreaders and rams at working pressures below 150 bar
150 bar
start of operation at 0 bar
start of spreading, pulling, squeezing, lifting, pushing at 150 bar
without Speed Valve with Speed Valve
Speed Valve
SEC
ON
DS
S EC
ON
DS
28NCT - New Car Technology
The ultimate hydraulic rescue equipment for
modern cars:
As extrication equipment has to be designed with the newest
developments in mind, Holmatro stays in frequent contact
with vehicle manufacturers. Extensive tests on the latest car
models and prototypes tell us that power alone is not enough.
The much harder, tougher materials and more intelligent car
constructions ask for extrication equipment that faces up to
these challenges: Holmatro’s NCT cutters.
New Car Technology (NCT) focuses on better cutting
performance.
This is achieved by a combination of three basic principles:
1. Advanced blade design
2. Flat central i-Bolt construction
3. More hydraulic cutting force
The confl ict between safety and accessibilityNewer and safer construction methods, improved design and the use of high strength materials are found in today's vehicles. The new technology in these cars often causes a paradox of safety versus accessibility. In other words, the car construction that makes it possible for a driver to survive an accident could be the same reason why it is impossible for rescuers to free him out of his car. To help rescuers face this challenge, Holmatro continuously innovates and improves its rescue equipment.
Cross section of the A-pillar of a new convertible before and after cutting.
Typical B-pillar cross section.
Holmatro NCT (New Car Technology)
29
- U-shaped blades pull material into the cutting recess.- Allows wide material to be cut at the strongest point of the cutter.
202 mm
NCT - New Car Technology
1. Advanced blade design
To be able to cut modern constructions, blade design is an important
part of the solution. In the event of an accident, precisely those
parts in a vehicle are strengthened where strategic cutting normally
has to be performed. The revolutionary Holmatro NCT blades, with
their characteristic 90˚ blade angle, have a huge opening at the
tips. They easily surround the wide pillars of modern cars. This
U-shape of the NCT blades automatically pulls the material to the
recess which is the point with the highest cutting force. The result:
a superior cutting performance. Modern vehicle constructions and
new hard materials are cut with far more effi ciency and at a much
lower working pressure than is possible with general purpose (GP)
blades. The NCT cutter has proven to be the ideal tool for rescue
organizations whose principal task is vehicle extrication.
NCT blades GP blades
210 bar
720 bar720 bar
590 bar
Indicative pressure needed to cut a B-pillar of a 2013 prototype car with Holmatro NCT blades.
Indicative pressure needed to cut a B-pillar of a 2013 prototype car with a conventional GP blade cutter.
Excess capacity with a cutter with Holmatro NCT blades (70%).
Excess capacity with a cutter with GP blades (18%).
Reserve for the future
70%
18%
0 bar0 bar
BA
R
B
AR
30NCT - New Car Technology
2. Central i-Bolt construction for superior cutting
performance
The construction of a tool is essential for achieving the optimum
cutting performance. For this reason, Holmatro developed
the i-Bolt. The i-Bolt squeezes the blades together more
tightly, resulting in less blade separation and improved cutting
performance. The much fl atter design of the revolutionary i-Bolt
also provides better access in narrow spaces. Its stainless steel
cover protects the bolt and blade holder against damage and
dirt.
Traditional bolt construction
Squeezes (“softer” aluminium) blade holder. Blades are squeezed indirectly only.
i-Bolt construction
Squeezes blades directly for a superior cutting performance and also results in a fl atter design.
103.8 t
3131
How does Holmatro stay at the forefront of advances
in materials and vehicle construction?
Holmatro acquires its knowledge of new car technology from a
number of sources. First and foremost we stay in close contact
with numerous leading manufacturers of passenger vehicles
and heavy goods vehicles. We would like to express our
gratitude to all of these manufacturers for helping us staying up
to date on the latest construction and design developments.
Another valuable source of information is the racing world.
Holmatro is the Offi cial Rescue Tool of the Indy Racing League.
New materials and construction methods to make cars lighter
and safer are often used fi rst in racing cars before ending up in
production vehicles some years later.
Last but not least we receive a lot of input from training institutes
and rescuers worldwide about their practical experiences.
Combined with our in-house engineering knowledge, these
sources help us develop rescue tools that are more than able
to face the tasks of everyday reality.
NCT - New Car Technology
See the NCT cutter range on the following pages.
3. More hydraulic cutting force
In rescue operations one needs power to cut the hardened
materials in (new) vehicles. Besides this, rescue scenes ask
for speed and ease of use. In the NCT cutter range Holmatro
created more power with the same maximum working pressure
(720 bar). By using newer lighter materials the stronger tools
kept their lighter weight without losing their necessary strength.
3232
NCT II Cutters - New Car Technologyspecifi cations CU 4035 C NCT II CU 4050 C NCT II CU 4055 C NCT II
equipped with CORE CORE CORE
article number 150.012.095 150.012.094 150.012.166
EN 13204 classifi cation AC145E-13.8 BC165H-18.0 CC202H-19.9
max. working pressure bar / MPa 720 / 72 720 / 72 720 / 72
blade opening mm 159 181 202
cutting force kN / t 355 / 36.2 927 / 94.5 1018 / 103.8
round bar (acc. to EN 13204) mm 32 41 41
weight, ready for use kg 13.8 18.0 19.9
dimensions (L x W x H) mm 714 x 270 x 202 775 x 270 x 218 805 x 270 x 218
required oil content (effective) cc 82 163 163
i-Bolt technology √ √ √
carrying handle with integrated lighting √ √ √
temperature range -20°C - +55°C
hydraulic safety factor 2 x max. working pressure of 720 bar = 1440 bar
endurance test tool 1000 cycles of biting in material that cannot be cut
endurance test dead man's handle 6000 cycles
also available in dual hose version √ √ √
Tested according to EN 13204 and NFPA 1936.
CU 4050 C NCT II
CU 4035 NCT II
1.1 Cutters - New Car Technology
3333
CU 4055 C NCT II
Features / Benefits
Improved blade design – NCT II
-pulls material towards the strongest point of the cutter - superior cutting performances, tested on the latest car models -41 mm round bar (CU 4050 / 4055)
Time saving New Car Technology
-one cut for even the widest and deepest B-post
New Car Technology - unmatched performance
Integrated lighting in handle
- clear view under all circumstances
New i-Bolt technology
Squeezes (“softer” aluminium) blade holder. Blades are squeezed indirectly only.
Traditional bolt construction New i-Bolt construction
Squeezes blades directly for a superior cutting performance.
1.1 Cutters - New Car Technology
-fl atter design for better access in tight places
-cuts all modern, strong and complex posts
3434
Tested according to EN 13204 and NFPA 1936.
1.2 Cutters - General Purpose
GP Cutters - General Purposespecifi cations CU 4007 C CU 4010 C GP CU 4020 C GP
equipped with CORE CORE CORE
article number 150.012.232 150.012.139 150.012.164
EN 13204 classifi cation AC59B-3.8 AC116D-7.8 AC133E-10.7
max. working pressure bar / MPa 720 / 72 720 / 72 720 / 72
blade opening mm 59 142 152
cutting force kN / t 220 / 22.4 254 / 25.9 394 / 40.2
round bar (acc. to EN 13204) mm 20 24 26
weight, ready for use kg 3.8 7.8 10.7
dimensions (L x W x H) mm 377 x 72 x 131 622 x 210 x 170 690 x 230 x 187
required oil content (effective) cc 24 37 107
i-Bolt technology √ – – √
temperature range -20°C - +55°C
hydraulic safety factor 2 x max. working pressure of 720 bar = 1440 bar
endurance test tool 1000 cycles of biting in material that cannot be cut
endurance test dead man’s control button 6000 operations --
endurance test dead man’s handle -- 6000 cycles
also available in dual hose version √ √ √
CU 4007 C
CU 4010 C GP
3535
CU 4020 C GP
Features / Benefits
Perfect balance
CU 4007 C - versatileAnti slip carrying handle on all tools
- always a perfect grip
- easy to pick up and to carry - usable by every rescuer in any position
For both left- and right-handed operators
1.2 Cutters - General Purpose
36361.2 Cutters - General Purpose
GP Cutters - General Purposespecifi cations CU 4030 C GP CU 4031 C GP
equipped with CORE CORE
article number 150.012.162 150.012.125
EN 13204 classifi cation BC160F-10.9 BC190H-13.8
max. working pressure bar / MPa 720 / 72 720 / 72
blade opening mm 181 300
cutting force kN / t 394 / 40.2 380 / 38.7
round bar (acc. to EN 13204) mm 26 32
weight, ready for use kg 10.9 13.8
dimensions (L x W x H) mm 711 x 230 x 187 759 x 270 x 202
required oil content (effective) cc 107 82
i-Bolt technology √ √
carrying handle with integrated lighting – – √
temperature range -20°C - +55°C
hydraulic safety factor 2 x max. working pressure of 720 bar = 1440 bar
endurance test tool 1000 cycles of biting in material that cannot be cut
endurance test dead man’s handle 6000 cycles
also available in dual hose version √ √
CU 4030 C GP
Tested according to EN 13204 and NFPA 1936.
3737
spacesaved
1.2 Cutters - General Purpose
- longer life span
- for cutting heavy duty round bar
- cuts wide material
CORE - weight reductionCORE - no hose kinking
- hoses weigh about 40% less than traditional dual hoses -easier handling
- saves space due to the absence of pigtail hoses
Features / Benefits
Various extra hardened and regrindable shapes of blades CORE - reduced dimensions of tools
Special recess in blades
300 mm
- extremely easy to roll and unroll
Straight blades with huge blade opening (CU 4031)
CU 4031 C GP
38381.2 Cutters - General Purpose
CU 4040 C GP
GP Cutters - General Purpose
specifi cations CU 4035 C GP CU 4040 C GP
equipped with CORE CORE
article number 150.012.123 150.012.183
EN 13204 classifi cation CC205H-14.2 CC220H-17.6
max. working pressure bar / MPa 720 / 72 720 / 72
blade opening mm 237 282
cutting force kN / t 380 / 38.7 470 / 47.9
round bar (acc. to EN 13204) mm 32 35
weight, ready for use kg 14.2 17.6
dimensions (L x W x H) mm 771 x 270 x 202 804 x 270 x 218
required oil content (effective) cc 82 140
i-Bolt technology √ --
carrying handle with integrated lighting √ √
temperature range -20°C - +55°C
hydraulic safety factor 2 x max. working pressure of 720 bar = 1440 bar
endurance test tool 1000 cycles of biting in material that cannot be cut
endurance test dead man’s handle 6000 cycles
also available in dual hose version √ √
Tested according to EN 13204 and NFPA 1936.
3939
max 720 bar max 25 bar
CU 4040 C GP
Features / Benefits
- no hose kinking - far more fl exible than steel wire reinforced hoses
CUTTING PERFORMANCE
28 mm 35 mm
110 x 10 mm 110 x 15 mm
76.1 x 4.0 mm 88.9 x 3.2 mm
60 x 60 x 4 mm 80 x 80 x 4 mm
80 x 40 x 4 mm 80 x 50 x 4 mm
1.2 Cutters - General Purpose
CU 4035 C GP
Do not repeat!Holmatro test situation only.
- time saving -cuts material according to class H or higher (EN 13204) -each profi le to be cut 12 times with 1 set of blades
-maximum grip during coupling and uncoupling -easy to store
Moving parts covered
- safe for the operator
CORE - safe CORE - para-aramid reinforced hoses only
-pressure in outer hose will never exceed 25 bar so operator will never be exposed to more than 25 bar
CORE - coupling under flowHighest cutting category EN-norm Hose binder and bend restrictor at both ends of the hose
Requirement EN category H
4040
12
3
4
5
2.1 Spreaders
Spreaders - accessories
for models 4230 4240/4241
1 1 x spare tip 150.013.602 150.013.702
2 1 x cutting tip (see picture above) 150.013.616 150.013.703
3 set pulling attachments 150.582.155 150.582.006
4 set pulling chains 3 m + 1.5 m 150.582.152 150.582.152
5 1 x spare tip with extra long tooth 1) – – 150.183.189
case with all tips (2 each) and set pulling attachments 150.582.017 150.582.014
case with set pulling chains 150.582.021 150.582.0211) for SP 4241, not in case 150.582.014
Spreaders
specifi cations SP 4230 C SP 4240 C SP 4241 C
equipped with CORE CORE CORE
article number 150.012.113 150.012.105 150.012.174
EN 13204 classifi cation AS33/835 - 17.2 AS43/686 - 18.1 AS43/686 - 18.8
max. working pressure bar / MPa 720 / 72 720 / 72 720 / 72
spreading mm 835 686 686
max. spreading force 1) kN / t 86 / 8.8 206 / 21.0 331 / 33.8
max. spreading force 2) kN / t 59 / 6.0 73 / 7.4 77 / 7.8
min. spreading force 3) kN / t 33 / 3.4 43 / 4.4 43 / 4.4
squeezing force kN / t 47 / 4.8 65 / 6.6 66 / 6.7
pulling distance mm 737 466 466
pulling force kN / t 53 / 5.4 90 / 9.2 90 / 9.2
weight, ready for use kg 17.2 18.1 18.8
dimensions (L x W x H) mm 855 x 316 x 206 771 x 316 x 206 769 x 316 x 206
required oil content (effective) cc 143 143 143
built-in Speed Valve √ √ √
carrying handle with integrated lighting √ √ √
temperature range -20°C - +55°C
hydraulic safety factor 2 x max. working pressure of 720 bar = 1440 bar
endurance test tool 1000 cycles of spreading and pulling while the tool is loaded
endurance test dead man’s handle 6000 cycles
also available in dual hose version √ √ √
SP 4230 C
1) measured at steel tips | 2) 25 mm from the tips | 3) according to EN 13204: 25 mm from tips over full spreading range | tested according to EN 13204 and NFPA 1936
SP 4241 C
4141
sec.
sec.
SP 4240 C
Features / Benefits
2.1 Spreaders
Unique Speed Valve
- also for use under water
Low weight and compact design
spreading pulling squeezing cutting -maximum handling comfort - easy to operate in all positions
Without Speed Valve
With Speed Valve
Integrated lighting in handle
- always a well-lit working area
Versatile
- signifi cantly faster tool opening for quicker reactions
at working pressures below
150 bar, the tools open up
signifi cantly quicker
also for use under water
4242
12
3
4
2.1 Spreaders
SP 4280 C
Spreaders
specifications SP 4260 C SP 4280 C
equipped with CORE CORE
article number 150.012.110 150.012.116
EN 13204 classification BS60/833-23.9 CS85/677-26.9
max. working pressure bar / MPa 720 / 72 720 / 72
spreading mm 833 677
spreading force 1) kN / t 269 / 27.4 397 / 40.5
spreading force 2) kN / t 108 / 11.0 132 / 13.5
min. spreading force 3) kN / t 60 / 6.1 85 / 8.7
squeezing force kN / t 83 / 8.5 177 / 18.0
pulling distance mm 638 476
pulling force kN / t 107 / 10.9 143 / 14.6
weight, ready for use kg 23.9 26.9
dimensions (L x W x H) mm 883 x 316 x 224 803 x 316 x 224
required oil content (effective) cc 245 245
built-in Speed Valve √ √
carrying handle with integrated lighting √ √
temperature range -20°C - +55°C
hydraulic safety factor 2 x max. working pressure of 720 bar = 1440 bar
endurance test tool 1000 cycles of spreading and pulling while the tool is loaded
endurance test dead man’s handle 6000 cycles
also available in dual hose version √ √
Spreaders - accessories
for models 4260 4280
1 1 x spare tip 150.183.188 150.183.187
2 1 x cutting tip 150.013.166 --
3 set pulling attachments 150.182.021 150.182.022
4 set pulling chains 3 m + 1.5 m 150.582.261 150.182.019
case with all tips (2 each) and set pulling attachments 150.582.013 --
case with set pulling chains 150.582.020 --
1) measured at steel tips | 2) 25 mm from the tips | 3) according to EN 13204: 25 mm from tips over full spreading range | tested according to EN 13204 and NFPA 1936
4343
sec.
sec.
max 25 barmax 720 bar
Features / Benefits
- signifi cantly faster toolopening for quicker reactions
- pressure in outer hose will never exceed 25 bar so operator will never be exposed to more than 25 bar
Do not repeat!Holmatro test situation only.
2.1 Spreaders
Unique Speed Valve
CORE - just one connection on tool and pump
Optimal balance between opening force and spreading width
Huge spreading distance and spreading force
CORE - safe
CORE - para-aramid reinforced hoses only
-power available where you need it: with the arms closed
85 kN - 132 kN
model 4280
-no hose kinking - far more fl exible than steel wire reinforced hoses
- time saving
SP 4260 C
Without Speed Valve
With Speed Valve
at working pressures below
150 bar, the tools open up
signifi cantly quicker
4444
21 2
3.1 Combi tools
1) according to EN 13204: 25 mm from tips over full spreading range | tested according to EN 13204 and NFPA 1936
Combi tools
specifi cations CT 4120 C CT 4150 C
equipped with CORE CORE
article number 150.012.141 150.012.099
EN 13204 classifi cation BK26/268-E-8.7 CK35/360-H-14.2
max. working pressure bar / MPa 720 / 72 720 / 72
spreading mm 268 360
max. spreading force kN / t 220 / 22.4 211 / 21.5
min. spreading force 1) kN / t 26 / 2.7 35 / 3.6
cutting opening mm 191 229
cutting force kN / t 247 / 25.2 380 / 38.7
round bar (acc. to EN 13204) mm 24 32
squeezing force kN / t 46 / 4.7 76 / 7.7
pulling distance mm 181 416
pulling force kN / t 61 / 6.2 51 / 5.2
weight, ready for use kg 8.7 14.2
dimensions (L x W x H) mm 675 x 210 x 170 787 x 270 x 202
required oil content (effective) cc 37 83
i-Bolt technology – – √
carrying handle with integrated lighting – – √
temperature range -20°C - +55°C
hydraulic safety factor 2 x max. working pressure of 720 bar = 1440 bar
endurance test tool 1000 cycles of spreading and pulling while the tool is loaded 1000 cycles of biting in material that cannot be cut
endurance test dead man’s handle 6000 cycles
also available in dual hose version √ √
Combi tools - accessories
for models 4120 4150
1 set pulling attachments 150.582.551 150.582.026
2 set pulling chains 3 m + 1.5 m 150.582.152 150.582.152
case with set pulling attachments and pulling chains 150.582.028 150.582.018
360°
4545
- always a perfect grip
-hose can rotate freely (360°) so impossible to get twisted
-easy to pick up and carry
Features / Benefits
Integrated lighting in handle Serrated spreading / squeezing tips
Non-slip carrying handle and perfect balance
CORE - hose rotates 360°
New i-Bolt technology
-perfect grip and no changing of tips necessary
- fl atter design for better access in tight places
Squeezes (“softer” aluminium) blade holder. Blades are squeezed indirectly only.
Traditional bolt construction New i-Bolt construction
Squeezes blades directly for a superior cutting performance.
CT 4150 C
3.1 Combi tools
- clear view under all circumstances
4646
Combi tools - accessories for model 5117
description art. nr.
1 set pulling attachments 150.182.241
2 set pulling chains, 1.5 m + 3.0 m 150.582.548
3.2 Combi tools
Combi tools
specifi cations CT 5111 CT 5111 RH CT 5117 CT 5117 RH
equipped with CORE CORE
article number 150.012.264 150.012.260 150.012.265 150.012.261
EN 13204 classifi cation BK48/281-E-8.2 BK28/431-E-8.9
max. working pressure bar / Mpa 720 / 72 720 / 72
spreading mm 281 431
max. spreading force kN / t 457 / 46.6 54 / 5.5
min. spreading force 1) kN / t 48 / 4.9 28 / 2.9
cutting opening mm 196 352
cutting force kN / t 206 / 21 204 / 20.8
round bar (acc. to EN 13204) mm 24 24
squeezing force kN / t 44 / 4.5 27 / 2,8
pulling distance mm -- 426
pulling force kN / t -- 30 / 3.1
weight ready for use kg 8.2 8.9
dimensions (LxWxH) mm 566 x 287 x 193 566x223x112 664x287x193 664x223x112
required oil content (effective) cc 55 55
i-Bolt technology √ √
carrying handle with integrated lighting √ -- √ --
360° rotatable & fold fl at carrying handle -- √ -- √
temperature range -20°C - +55°C
hydraulic safety factor 2 x max. working pressure of 720 bar = 1440 bar
endurance test tool 1000 cycles of spreading while the tool is loaded and 1000 cycles of biting in material that cannot be cut
endurance test dead man's handle 6000 cycles
1) according to EN 13204: 25 mm from tips over full spreading range
1 2
CT 5117
CT 5111
CT 5117 RH
47473.2 Combi tools
Features / Benefits
Ultra compact and extreme lightweight High spreading force (5111 models)
-all models weigh far under 9 kg and are very compact
CT 5111 RH
High spreading distance (5117 models)360° rotatable aluminium carrying handle (RH models)
- continuous swivel with 11 locking positions - for use of the tool in almost any position
431 mm
46.6 t
4848
1
3
4
5
6
22
Rams - single plunger - accessories
description art. nr.
1 ram support HRS 22 1) 150.181.011
2 ram support HRS 22 NCT 2) 150.003.105
3 extension pipe 125 mm 3) 150.181.570
4 extension pipe 225 mm 3) 150.181.571
5 extension pipe 500 mm 3) 150.181.572
6 connection piece 150.181.573
1) see also page 114 | 2) see also page 113 | 3) only connectable to the fi xed base of
the ram
4.1 Rams - single plunger
Rams - single plunger
specifi cations RA 4311 C RA 4313 C RA 4315 C
equipped with CORE CORE CORE
article number 150.032.042 150.032.043 150.032.044
EN 13204 classifi cation R100/150-7.6 R100/250-9.0 R100/400-10.9
max. working pressure bar / MPa 720 / 72 720 / 72 720 / 72
spreading force over full stroke kN / t 100 / 10.2 100 / 10.2 100 / 10.2
number of plungers 1 1 1
spreading stroke mm 150 250 400
retracted length mm 315 415 565
extended length mm 465 665 965
weight, ready for use kg 7.6 9.0 10.9
dimensions (L x W x H) mm 315 x 122 x 325 415 x 122 x 325 565 x 122 x 325
required oil content (effective) cc 144 241 385
built-in Speed Valve √ √ √
temperature range -20°C - +55°C
hydraulic safety factor 2 x max. working pressure of 720 bar = 1440 bar
endurance test tool 1000 cycles of spreading while the tool is loaded
endurance test dead man’s handle 6000 cycles
also available in dual hose version √ √ √
Tested according to EN 13204 and NFPA 1936.
RA 4313 CRA 4311 C
spacesaved
4949
max 720 bar max 25 bar
RA 4315 CRA 4313 CRA 4311 C
315 465 415 665 565
CORE – safe Rotating cross heads
-pressure in outer hose will never exceed 25 bar so operator will never be exposed to more than 25 bar
Unique Speed Valve
- faster tool opening for quicker reactions
At working pressures below 150 bar, the tools open up signifi cantly quicker.
CORE – reduced dimensions of tools
- saves space due to the absence of pigtail hoses
-easy positioning and perfect grip in every situation
Working as a team
- larger model can be placed in the opening created by a smaller model or by a spreader (for both CORE and dual hose version)
sec.
sec.Without Speed Valve
With Speed Valve
Features / Benefits
4.1 Rams - single plunger
RA 4315 C
5050
Larger model can be placed in the opening created by a smaller model.
Rams - single plunger
specifi cations RA 4321 C RA 4331 C
equipped with CORE CORE
article number 150.032.045 150.032.046
EN 13204 classifi cation R161/250-11.1 R161/350-12.6
max. working pressure bar / MPa 720 / 72 720 / 72
spreading force over full stroke kN / t 161 / 16.4 161 / 16.4
pulling force over full stroke kN / t 50 / 5.1 50 / 5.1
number of plungers 1 1
spreading / pulling stroke mm 250 350
retracted length mm 512 612
extended length mm 762 962
weight, ready for use kg 11.1 12.6
dimensions (L x W x H) mm 512 x 122 x 338 612 x 122 x 338
required oil content (effective) cc 389 544
built-in Speed Valve √ √
temperature range -20°C - +55°C
hydraulic safety factor 2 x max. working pressure of 720 bar = 1440 bar
endurance test tool 1000 cycles of spreading and pulling while the tool is loaded
endurance test dead man’s handle 6000 cycles
also available in dual hose version √ √
for accessories see page 54 | tested according to EN 13204 and NFPA 1936
4.2 Rams - single plunger
RA 4321 C
22°
- faster tool opening for quicker reactions
At working pres-sures below 150 bar, the tools open upsignifi cantly quicker.
sec.
sec.Without Speed Valve
With Speed Valve
5151
Snap-lock system for accessories Extension pipes
Proportional operation handle
-3 different sizes to bridge large lengths -only connectable to the fi xed side of the rams model 4321 / 4331
CORE - flexible hose
- changing of accessories without the use of tools within seconds
-provides multifunctional applications - see page 54 -allows for precise and accurate spreading action
- far easier to roll and unroll than traditional double hoses
Features / Benefits
Full range of accessories
Unique Speed Valve
RA 4331 C
4.2 Rams - single plunger
5252
Rams - double plunger
specifi cations RA 4322 C RA 4332 C
equipped with CORE CORE
article number 150.032.041 150.032.047
EN 13204 classifi cation R161/480-15.4 R161/680-18.3
max. working pressure bar / MPa 720 / 72 720 / 72
spreading force over full stroke kN / t 161 / 16.4 161 / 16.4
pulling force over full stroke kN / t 50 / 5.1 50 / 5.1
number of plungers 2 2
spreading / pulling stroke mm 2 x 240 2 x 340
retracted length mm 745 945
extended length mm 1225 1625
weight, ready for use kg 15.4 18.3
dimensions (L x B x H) mm 745 x 122 x 338 945 x 122 x 338
required oil content (effective) cc 747 1058
built-in Speed Valve √ √
temperature range -20°C - +55°C
hydraulic safety factor 2 x max. working pressure of 720 bar = 1440 bar
endurance test tool 1000 cycles of spreading and pulling while the tool is loaded
endurance test dead man’s handle 6000 cycles
also available in dual hose version √ √
for accessories see page 54 | tested according to EN 13204 and NFPA 1936
4.3 Rams - double plunger
RA 4322 C
sec. sec.
spacesaved
5353
at working pressures below 150 bar, the tools open up signifi cantly quicker
Without Speed Valve With Speed Valve
Features / Benefits
Unique Speed Valve
RA 4332 C
CORE - reduced dimensions
- changing of accessories without the use of tools within seconds
CORE - lightweight hoses
- faster tool opening for quicker reactions - saves space due to the absence of pigtail hoses
Rotating cross heads
- easy positioning and perfect grip in every situation
CORE Technology system:about 40% weight reduction
- reinforced with multilayered para-aramid yarn so far more fl exible than steel wire reinforced hoses -no hose kinking
CORE - reinforced hoses only Snap-lock system for accessories
traditional dual hose system
4.3 Rams - double plunger
4h
4g
4f
4e
4d 4c 4b
4i
4a
5
4
6
3
1
5a
2
545454
Rams - accessories
item description art. nr. quantity
for models 4321 / 4331 4322 / 4332 – –
1 ram support HRS 22 NCT 1) 150.003.105 – –
2 ram support HRS 22 2) 150.181.011
3 rim adapter set, in carrying / storage box 3) 150.182.580 – –
4 set accessories in carrying / storage box 150.582.008 – –
4a cross head, set of 2 150.014.062 1
4b wedge piece 150.181.324 1
4c conical tip 150.181.325 1
4d base plate 150.181.326 2
4e connection piece (for fi xed strut) 4) 150.181.327 1
4f extension pipe 165 mm 4) 150.181.321 – – 1
4g extension pipe 330 mm 4) 150.181.322 – – 1
4h extension pipe 600 mm 4) 150.181.323 – – 1
4i set pulling attachments 150.582.281 1
5 set pulling chains in carrying / storage box 150.582.021 – –
5a pulling chains 150.582.152 – –
6 carrying handle – – 150.013.163
1) see also page 113 | 2) see also page 114 | 3) see also page 115 | 4) extension pipes can ONLY be mounted on the fi xed base of the single plunger ram jacks models 4321 / 4331 or can be used as a fi xed strut
4.4 Rams - accessories
SP 4230 CSP 4260 C
TR 4340 CTR 4350 C
RA 4321 CRA 4331 C
RA 4311 CRA 4313 CRA 4315 C
SP 4230 CSP 4240 CSP 4260 CSP 4280 C
TR 4340 C RA 4311 C
CT 4150 C
RA 4332 CRA 4322 C
745 1225 945
RA 4315 CRA 4313 CRA 4311 C TR 4350 CTR 4340 C
303 585 533
RA 4322 C
5555
315 465 415 665 565
RA 4321 C RA 4331 C
512 762 612
Rams fi tting in the opening created by a spreader or a combi tool (for both CORE and dual hoses).
The larger model ram fi ts in the opening created by a smaller one (for both CORE and dual hose version).
Extension pipes ONLY on fi xed base of single plunger rams.
Teamwork
Teamwork
Extension pipes
4.4 Rams - accessories
2
5656
1
4
3
Tested according to EN 13204 and NFPA 1936.
Extension pipes to create an even larger opening
4.5 Rams - telescopic plunger
Rams - telescopic plunger
specifi cations TR 4340 C TR 4350 C
equipped with CORE CORE
article number 150.032.039 150.032.040
EN 13204 classifi cation TR217/158-81/124-10.8 TR217/388-81/354-16.3
max. working pressure bar / MPa 720 / 72 720 / 72
spreading force 1st plunger kN / t 217 / 22.1 217 / 22.1
spreading force 2nd plunger kN / t 81 / 8.3 81 / 8.3
spreading stroke 1st plunger mm 158 388
spreading stroke 2nd plunger mm 124 354
total spreading stroke mm 282 742
retracted length mm 303 533
max. length mm 585 1275
weight, ready for use kg 10.8 16.3
dimensions (L x B x H) mm 303 x 133 x 350 533 x 133 x 350
required oil content (effective) cc 475 1207
built-in Speed Valve √ √
temperature range -20°C - +55°C
hydraulic safety factor 2 x max. working pressure of 720 bar = 1440 bar
endurance test tool 1000 cycles of spreading while the tool is loaded
endurance test dead man’s handle 6000 cycles
also available in dual hose version √ √
Rams - telescopic - accessories
description art. nr.
1 ram support HRS 22 NCT 1) 150.003.105
2 ram support HRS 22 2) 150.181.011
3 extension pipe 250 mm 3) 150.181.330
4 extension pipe 450 mm 3) 150.181.331
1) see also page 113 | 2) see also page 114 3) can only be mounted on the fi xed base of models 4340
533
585
303
TR 4340 CTR 4350 C
SP 4230 CSP 4240 CSP 4260 CSP 4280 C
spacesaved
- faster tool opening for quicker reactions
At working pressures below 150 bar, the tools open upsignifi cantly quicker.
sec.
sec.Without Speed Valve
With Speed Valve
5757
- the larger model can be placed in the opening created by the smaller one and continue the spreading job
Extremely compact Working as a team
Unique Speed Valve
Teamwork with all spreaders
CORE - reduced dimensions
TR 4350 C
TR 4340 C
- fi t in the opening made with any spreader(for both CORE and dual hoses)
- storage of a traditional dual - storage of a CORE
hose rescue set rescue set
TR 4350 C
TR 4340 C
Features / Benefits
4.5 Rams - telescopic plunger
5858
Rams - Extendo
specifi cations XR 4360 C
equipped with CORE
article number 150.032.094
EN 13204 classifi cationR100/650-13.6
TR100/300-100/350-13.6
max. working pressure bar / MPa 720 / 72
spreading force 1) kN / t 100 / 10.2
mechanical spreading stroke mm 300
hydraulic spreading stroke mm 350
total spreading stroke mm 650
retracted length mm 625
extended length mm 1275
weight ready for use kg 13.6
dimensions (L x W x H) mm 625 x 209 x 168
required oil content (effective) cc 356
built-in Speed Valve √
temperature range -20°C - +55°C
hydraulic safety factor 2 x max. working pressure of 720 bar = 1440 bar
endurance test tool 1000 cycles of spreading while the tool is loaded
endurance test dead man’s handle 6000 cycles
also available in dual hose version √
4.6 Rams - Extendo
Rams - Extendo - accessories
description art. nr.
1 ram support HRS 22 NCT 1) 150.003.105
1
Quick positioning: place in ram support and extend manually.
1) over full stroke | tested according to EN 13204 and NFPA 1936
Quick positioning: place in ram
Safe & easy auto-lock system: locks automatically when extended manually, unlocks in 2 steps.
Unlocking
step 1: press button to left or right
step 2: push ram in upward direction
before pulling it down
1) see also page 113
59594.6 Rams - Extendo
Features / Benefits
Manually extendable
Large manual stroke
- easy: no need to lock manually- safe: no accidental unlocking possible thanks 2-step unlocking system (see page 58)
Manual extension with auto-lock system
Unique adjustable carrying handle
- can be turned to left or right: easy use of ram on all sides of the car
10 t pushing force at every length
Compact dimensions with large stroke
10 t
10 t
10 t
- for quicker positioning- enables more precise positioning- allows you to start spreading almost immediately
- can be turned to left or right:
- also quickly positioned in large door openings - no loss of power over full stroke
SP 4230 CSP 4240 CSP 4260 CSP 4280 C
- suitable for situations where little space is available and a large stroke required- easy to store- fi ts in the opening created by any Holmatro spreader
1) see also page 113
Features / Benefits
3-stage pump technology
- enables faster tool operation when possible and more control when you need it
1) EN 13204: STO = Single Tool Operation | 2) inclusive batttery, hydraulic oil and coupler
1ststage
2ndstage
2-stage pump technology
pressure
fl ow
= s
peed
fl ow
action complete
time
action complete
time saving!
3-stage pump
2-stage pump
pres
sure
Time required to cut a typical B-pillar using a Holmatro NCT cutter connected to a 2-stage or a 3-stage pump.
SPU 16 BC - accessories
description art. nr.
Docking Station SPU 16 150.004.623
Inverter 12VDC 150.004.586
Mou nting plate pump side SPU 16 BC 1) 150.062.192
Quick Fix & Release Bracket 1) 150.062.188
Angled mounting plate truck side 1) 150.062.193
See also page 66.
1ststage
2ndstage
3rdstage
3-stage pump technology
extra fl ow / speed compared to 2-stage pumps
pressure
fl ow
= s
peed
Motor pump - Battery driven Greenline
specifi cations SPU 16 BC
equipped with CORE
article number (excl. battery) 150.152.689
EN 13204 classifi cation 1) STO
number of tool connections 1
working pressure bar / Mpa 720 / 72
pump type 3-stage axial
continuous operation hours90 minutes during common vehicle extrications
180 minutes unloaded (idle)
capacity oil tank cc 1700
output 1st stage 0-130 bar cc/min 2700
output 2nd stage 130-280 bar cc/min 1200
output 3rd stage 280-720 bar cc/min 450
weight ready for use 2) kg 17.7
dimensions (L x W x H) mm 530x252x388
sound emission dB(A) 67
temperature range -20°C - +55°C
60605.1 Motor pumps - Battery driven Greenline
Required articles
Battery SPU 16 BC 150.004.313
Charger SPU 16 BC 150.004.048
SPU 16 BC
Zero emission - no fumes
LED lights above the valve block and LED batteryindicator
- ideal for powering rescue equipment in confi ned spaces like tunnels, trains and collapsed buildings- healthier for rescuers and victims- environmentally friendly
-easy to locate pump in the dark - facilitates coupling and uncou-pling of hose in the dark - indicates battery capacity while pump is in use -when pump is not in use, the bat-tery capacity can be checked by pressing a button
Features / Benefits
Unlimited usability
- suitable for air transportation- suitable for use at high altitudes without loss of performance- easy to carry by one person to any rescue situation
SPU 16 BC
- ideal for powering rescue equipment in confi ned spaces like tunnels,
Long running time
-90 minutes during common vehicle extrications, even with the use of heavy-duty rescue tools -45 minutes continuous spread/cut tool use
ECO whisper mode All weather proof
- power saving and extremely low noise level when tool is not in use - suitable for use at below zero temperatures, up to -200 C- suitable for use in wet weather conditions
61615.1 Motor pumps - Battery driven Greenline
3-stage pump technology
- enables faster tool operation when possible and more control when you need it
1ststage
2ndstage
2-stage pump technology
pressure
fl ow
= s
peed
fl ow
action complete
time
action complete
time saving!
3-stage pump
2-stage pump
pres
sure
Time required to cut a typical B-pillar using a Holmatro NCT cutter connected to a 2-stage or a 3-stage pump.
1ststage
2ndstage
3rdstage
3-stage pump technology
extra fl ow / speed compared to 2-stage pumps
pressure
fl ow
= s
peed
SPU 16 BC - accessories
description art. nr.
Mou nting plate pump side SPU 16 BC 150.062.192
Quick Fix & Release Bracket 150.062.188
Angled mounting plate truck side 150.062.193
See also page 66.
6262
Features / Benefits
5.2 Motor pumps - Personal Power
1) STO = Single Tool Operation | 2) inclusive hydraulic and engine oil, fuel and coupler
Motor pump - Personal Power Petrol
specifi cations SPU 16 PC
equipped with CORE
article number 150.152.671
EN 13204 classifi cation 1) STO
number of tool connections 1
working pressure bar / MPa 720 / 72
4-stroke petrol engine 2.1 HP - 1.6 kW
capacity fuel tank cc 1000
continuous operation hours 3
capacity oil tank cc 1700
pump type three-stage axial
output 1st stage 0-150 bar cc/min 3450
output 2nd stage 150-450 bar cc/min 1050
output 3rd stage 450-720 bar cc/min 700
weight, ready for use 2) kg 16.7
dimensions (L x W x H) mm 510 x 250 x 380
sound emission dB(A) 72
temperature range -20°C - +55°C
High noise level -negative effect on victim -diffi cult to communicate at rescue scene
Low noise level -decreased burden on victim -easy to communicate at rescue scene
72 dB
noiselevel (dB)
SPU 16 PC
6363
Standard in ECO mode: Electronic engine speed control Lighting above valve block
Engine speed increases automatically to maximum when tool is used. When tool is not used, engine reverts to idle speed.- minimizes noise level at the rescue scene- minimizes fuel consumption
-easy identifi cation of pump location in the dark - facilitates (un)coupling of hose in the dark
Features / Benefits
5.2 Motor pumps - Personal Power
Lightweight and ergonomic
Slim design to carry close to body, carrying handle centrally positioned.- easy to carry by one person to accident location
Switch inside pump
Easy communication with victim, no need to switch off the pump.
6464
DPU 31 PC - accessories
description art. nr.
Mounting plate pump side DPU 31 PC 150.062.191
Quick Fix & Release Bracket 150.062.188
Angled mounting plate truck side 150.062.193
See also page 66.
1) EN 13204: MTO = Multiple Tool Operation | 2) inclusive hydraulic and engine oil, fuel and couplers
Motor pumps - Personal Power - Duo - 2 connections - 2 tools working simultaneously
Petrol
specifi cations DPU 31 PC
equipped with CORE
article number 150.152.180
EN 13204 classifi cation 1) MTO
number of tool connections 2
number of tools working simultaneously 2
working pressure bar / MPa 720 / 72
4-stroke petrol engine 3.5 HP - 2.6 kW
capacity fuel tank cc 1250
continuous operation hours 4
capacity oil tank cc 2490
pump type 2 x two-stage axial
output 1st stage 0-190 bar cc/min 2 x 2900
output 2nd stage 190-720 bar cc/min 2 x 575
weight, ready for use 2) kg 24.9
dimensions (L x W x H) mm 600 x 290 x 425
sound emission dB(A) 68
temperature range -20°C - +55°C
ECO Switch
Electronic engine speed control. In ECO setting, engine speed increases automatically to maximum speed when tool is used.
When tool is not used, engine speed reverts to nominal speed.
Minimises noise and fuel consumption.
5.2 Motor pumps - Personal Power - Duo
6565
Duo Personal Power pump – low weight of < 25 kg
- suffi cient to operate any two rescue tools at the same time
Lighting above valve block
- can easily be carried by one person; according to EN 13204 -easy identifi cation in the dark and facilitates coupling and uncoupling of hoses
Hydraulic oil content of 2490 cc Large and clear gauges on front side
- quick and easy checking of hydraulic oil and petrol levels
Features / Benefits
5.2 Motor pumps - Personal Power - Duo
66665.3 Quick Fix & Release Brackets
Universal mounting
Safe
- suitable for use in most vehicles -quick and easy mounting
- 2-step unlocking system helps prevent accidental realease of the pump
For quick release of the pump
- simply press the handle and slide it to the side to unlock the pump, then slide the pump from the bracket - saves precious time during a rescue operation, when every second counts
For quick securing of the pump
- simply put the pump on the bracket and push the handle back to the locked position - saves time and effort when packing up your vehicle after the rescue operation
Features / Benefits
Ergonomic
- slide mechanism reduces strain on rescuers when removing and stowing the pump
Saves space
- takes up less space in the rescue vehicle than traditional pump securing systems -no additional space required to release the pump
Protects the pump from damage
-pump is secured and locked to the base with locking handle -no movement of pump, even when the ride is bumpy
2 configurations available
-with angle mounting plate for easier removal and stowage of the pump in higher truck compartments - fl at version for use in lower compartments
Quick Fix & Release Brackets
description for pump type art.nr.
mounting plate pump side to mount pump on bracket SR 10 150.062.189
mounting plate pump side to mount pump on bracket SR 20 150.062.190
mounting plate pump side to mount pump on bracket DPU 31 PC 150.062.191
mounting plate pump side to mount pump on bracket SPU 16 BC / PC 150.062.192
Quick Fix & Release Bracket all 150.062.188
angle mounting plate truck side all 150.062.193
Soft-grip carrying handle
- better grip - ergonomic design for improved carrying balance - pump easier to carry
Compact and lightweight
-weight only 14.5 kg ready for use -ergonomic, compact design -easy to carry -easy to store
3-stage pump technology
-much higher fl ow/speed in 2nd stage for quicker rescue operations - lower fl ow/speed in 3rd stage for more tool control
Large hydraulic oil capacity
-pump can be used with any tool including the biggest rams
Oil level indicator / sensor
- for quick and easy monitoring of oil level from the outside of the pump -engine oil level sensor secures motor from running without oil
6767
1) EN 13204: STO = Single Tool Operation | 2) inclusive hydraulic and engine oil, fuel and coupler
5.4 Motor pumps - Spider Range - SR 10-series
Motor pumps - Spider Range Petrolspecifi cations SR 10 PC 1
equipped with CORE
article number 150.152.690
EN 13204 classifi cation 1) STO
number of tool connections 1
working pressure bar / Mpa 720 / 72
4-stroke petrol engine 2.1 HP - 1.6 Kw
capacity fuel tank cc 770
continuous operation hours 3
capacity oil tank cc 2840
pump type 3-stage axial
output 1st stage 0-150 bar cc/min 2900
output 2nd stage 150-280 bar cc/min 1300
output 3rd stage 280-720 bar cc/min 550
weight ready for use 2) kg 14.5
dimensions (L x W x H) mm 360x290x423
sound emission dB(A) 79
temperature range -20°C - +55°C
also available in dual hose version √
Features / Benefits
SR 10 - accessories
description art. nr.
Mounting plate pump side SR 10 1) 150.062.189
Quick Fix & Release Bracket 1) 150.062.188
Angled mounting plate truck side 1) 150.062.193
LED light Spider range 590.000.343
1) see also page 66.
68685.5 Motor pumps - Spider Range - SR 20-series
Motor pumps - Spider Range Petrol Electricspecifi cations SR 20 PC 2 SR 20 DC 1 SR 20 DC 2
equipped with CORE CORE CORE
article number 150.152.696 150.152.699 150.152.730
EN 13204 classifi cation 1) MTO STO MTO
number of tool connections 2 1 2
number of tools working simultaneously 2 -- 2
working pressure bar / Mpa 720 / 72 720 / 72 720 / 72
4-stroke petrol engine) 3.0 HP - 2.2 kW -- --
electric engine 230 VAC - 1.1 kW - 50 Hz - 1 Ph 230 VAC - 1.8 kW - 50 Hz - 1 Ph
pump type 2 x 3-stage axial 3-stage axial 2 x 3-stage axial
capacity fuel tank cc 1700 -- --
continuous operation hours 4 no limitation no limitation
capacity oil tank cc 4340 4340 4340
output 1st stage 0-150 bar cc/min 2 x 2900 3000 2 x 3000
output 2nd stage 150-280 bar cc/min 2 x 1300 1350 2 x 1350
output 3rd stage 280-720 bar cc/min 2 x 550 575 2 x 575
weight ready for use 2) kg 22.7 24.9 34.0
dimensions (L x W x H) mm 455x315x460 455x315x460 455x315x460
sound emission dB(A) 81 73 73
temperature range -20°C - +55°C -20°C - +55°C -20°C - +55°C
also available in dual hose version √ √ √
SR 20 - accessories
description art. nr.
mounting plate pump side SR 20 1) 150.062.190
Quick Fix & Release Bracket 1) 150.062.188
angled mounting plate truck side 1) 150.062.193
LED light Spider range 150.000.343
1) see also page 66
1) EN 13204: STO = Single Tool Operation MTO = Multiple Tool Operation | 2) inclusive hydraulic and engine oil, fuel and coupler(s)
6969
SR 20 PC 2
5.5 Motor pumps - Spider Range - SR 20-series
SR 20 PC 2
Soft-grip carrying handle
- better grip - ergonomic design for improved carrying balance - pump easier to carry
3-stage pump technology
-much higher fl ow/speed in 2nd stage for quicker rescue operations - lower fl ow/speed in 3rd stage for more tool control
Features / Benefits
Compact and lightweight
- standard version weighs only 22.7 kg -ergonomic, compact design -easy to carry -easy to store
Large hydraulic oil capacity
-pump can be used with any tool including the biggest rams (STO models) - enough oil to operate any two rescue tools at the same time (MTO models)
Hydraulic oil level indicator
- for quick and easy monitoring of oil level from the outside of the pump
70705.6 Motor pumps - Spider Range - SR 30-series
Motor pumps - Spider Range Petrol Electricspecifi cations SR 31 PC 2 SR 32 PC 2 SR 31 DC 2 SR 32 DC 2equipped with CORE CORE
article number 150.152.703 150.152.707 150.152.711 150.152.713
EN 13204 classifi cation 1) MTO MTO
number of tool connections 2 2
number of tools working simultaneously 2 2
working pressure bar / Mpa 720 / 72 720 / 72
4-stroke petrol engine 3.0 HP - 2.2 kW --
electric engine -- 230 VAC - 1.8 kW - 50 Hz - 1 Ph
pump type 2 x 3-stage axial 2 x 3-stage axial
capacity fuel tank cc 1700 --
continuous operation hours 4 no limitation
capacity oil tank cc 4340 4340
output 1st stage 0-150 bar cc/min 2 x 2900 2 x 3000
output 2nd stage 150-280 bar cc/min 2 x 1300 2 x 1350
output 3rd stage 280-720 bar cc/min 2 x 550 2 x 575
weight ready for use 2) kg 64.5 69.4 72.7 77.6
dimensions (L x W x H) mm 742x517x555 742x517x555
length of hoses m 15 20 15 20
sound emission dB(A) 81 73
temperature range -20°C - +55°C -20°C - +55°C
1) EN 13204: MTO = Multiple Tool Operation | 2) inclusive hydraulic and engine oil, fuel, hoses and coupler(s)
Motor pumps - Spider Range - with foldable wheel setmodel art. nr. weight (kg)
SR 31 PC 2 W 150.152.705 66.1
SR 32 PC 2 W 150.152.709 71.0
SR 31 DC 2 W 150.152.711 74.3
SR 32 DC 2 W 150.152.714 79.2
71715.6 Motor pumps - Spider Range - SR 30-series
3-stage pump technology
-much higher fl ow/speed in 2nd stage for quicker rescue operations - lower fl ow/speed in 3rd stage for more tool control
Features / Benefits
SR 31 PC 2 W
Large hydraulic oil capacity
- enough oil to operate any two tools at the same time, including the biggest rams
Hydraulic oil level indicator
- for quick and easy monitoring of oil level from the outside of the pump
Complete with hose reels and tool support
-with 15 m or 20 m hose reels -with universal support for cutters, spreaders and combi tools
Foldable carrying handles
- for easy carrying - foldable for easy storage
Foldable wheels set (optional)
- for fast and easy transportation
72725.7 Motor pumps - Spider Range - SR 40-series
Motor pumps - Spider Range Petrol Electricspecifi cations SR 40 PC 2 SR 41 PC 2 SR 42 PC 2 SR 40 DC 2 SR 41 DC 2 SR 42 DC 2
equipped with CORE CORE
article number 150.152.715 150.152.718 150.152.721 150.152.724 150.152.726 150.152.728
EN 13204 classifi cation 1) MTO MTO
number of tool connections 2 2
number of tools working simultaneously 2 2
working pressure bar / Mpa 720 / 72 720 / 72
4-stroke petrol engine 5.5 HP - 4.1 kW --
electric engine -- 230 VAC - 1.8 kW - 50 Hz - 1 Ph
pump type 2 x 3-stage axial 2 x 3-stage axial
capacity fuel tank cc 3100 --
continuous operation hours 4 no limitation
capacity oil tank cc 6340 6340
output 1st stage 0-150 bar cc/min 2 x 2900 2 x 3000
output 2nd stage 150-280 bar cc/min 2 x 1300 2 x 1350
output 3rd stage 280-720 bar cc/min 2 x 550 2 x 575
weight ready for use 2) kg 37.3 64.0 68.9 41.0 67.7 72.6
dimensions (L x W x H) mm 497x467x492 497x950x492 497x467x492 497x950x492
length of hoses m --- 15 20 --- 15 20
sound emission dB(A) 84 73
temperature range -20°C - +55°C -20°C - +55°C
also available in dual hose version √ √ √ √ √ √1) EN 13204: MTO = Multiple Tool Operation | 2) inclusive hydraulic and engine oil, fuel, (hoses) and couplers
SR 40 - accessories
description art. nr.
LED light Spider range 150.000.343
Motor pumps - accessoriesCORE elbow connector 150.182.176
This elbow connector is particularly useful when there is little space in a compartment of a truck with a built-in pump and the CORE hoses permanent connected. Without this elbow connector, the connected hoses ‘point forward’ before they can bend sideways and consequently ask for much space in a truck compartment. By use of the CORE elbow connector a 90 degree angle is achieved and therefore valuable space in a truck is saved.
73735.7 Motor pumps - Spider Range - SR 40-series
3-stage pump technology
-much higher fl ow/speed in 2nd stage for quicker rescue operations - lower fl ow/speed in 3rd stage for more tool control
Features / Benefits
SR 40 PC 2
Optimal weight / performance ratio
- lighter than comparable heavy duty pumps
Large hydraulic oil capacity
- enough oil to operate any two tools at the same time and multiple tools successively, including the biggest rams
Hydraulic oil level indicator on pump
- integrated dip stick for quick and easy monitoring of oil level
Soft-grip carrying handle
-better grip -ergonomic design for improved carrying balance -pump easier to carry
Other options
-15 m or 20 m hose reels -dual hose connection for traditional dual hose systems;with pivoting couplers for easy storage (no couplers sticking out)couplers for easy storage (no couplers sticking out)
SR 41 PC 2
7474
AHS 1400 FDUC
Pumps - air drivenspecifi cations AHS 1400 FDUC
equipped with CORE
article number 150.152.584
EN 13204 classifi cation * STO
number of tool connections 1
working pressure bar / MPa 720 / 72
source of energy air driven
max. air pressure bar / MPa 8 / 0.8
capacity oil tank cc 1400
pump type radial piston
output unloaded cc/min 960
output loaded cc/min 410
air-consumption unloaded l/min 700
air-consumption loaded l/min 580
weight, ready for use kg 6.9
dimensions (L x W x H) mm 333 x 125 x 200
temperature range -20°C - +55°C
also available in dual hose version √
Air Driven Pumps - accessories
description art. nr.
oil lubricator 510.511.105
air fi lter with water separator 510.502.033
5.8 Pumps - diesel / air driven
* EN 13204 : STO = Single Tool Operation
Pumps - dieselspecifi cations SR 40 YC 2
equipped with CORE
article number 150.152.737
EN 13204 classifi cation * MTO
number of tool connections 2
number of tools simultaneously usable 2
working pressure bar / MPa 720 / 72
4-stroke diesel engine 4.2 HP - 3.1 kW
pump type 2 x 3 stage axial
capacity fuel tank cc 2400
continuous operation hrs 4
capacity oil tank cc 6340
output 1st stage 0 - 150 bar cc / min 3000
output 2nd stage 150 - 280 bar cc / min 1350
output 3rd stage 280 - 720 bar cc / min 575
weight, ready for use kg 47.0
dimensions (L x W x H) mm 497 x 467 x 572
sound emission (unloaded) dB(A) 84
temperature range -20°C - +55°C
* EN 13204 : MTO = Multiple Tool Operation
SR 40 YC 2
Diesel Pump - accessories
description art. nr.
LED light Spider range 150.000.343
CORE elbow connector 150.182.176
7575
Air Driven Pumps - accessories
description art. nr.
oil lubricator 510.511.105
air fi lter with water separator 510.502.033
* EN 13204 : STO = Single Tool Operation
5.9 Motor pumps - DPU 60-series - Duo
Motor pumps - Duo Petrolspecifi cations DPU 61 PXC 15 DPU 61 PXC 20
equipped with CORE CORE
article number 150.152.215 150.152.276 150.152.218 150.152.278
EN 13204 classifi cation 1) MTO MTO
number of tool connections 2 2
number of tools working simultaneously 2 2
working pressure bar / Mpa 720 / 72 720 / 72
4-stroke petrol engine 5.5 HP - 4.1 kW 5.5 HP - 4.1 kW
pump type 2 x 2-stage radial 2 x 2-stage radial
capacity fuel tank cc 1400 1400
continuous operation hours 4 4
capacity oil tank cc 4000 4000
output 1st stage 0-190 bar cc/min 2 x 2565 2 x 2565
output 2nd stage 190-720 bar cc/min 2 x 660 2 x 660
weight ready for use 2) kg 78.9 83.7
dimensions (L x W x H) mm 500x822x497 500x822x497
length of hoses m 15 20
colour of hoses orange/orange orange/blue orange/orange orange/blue
sound emission dB(A) 84 84
temperature range -20°C - +55°C -20°C - +55°C
electric start √ √ √ √
also available in dual hose version √ √ √ √
DPU 61 PC
1) EN 13204: MTO = Multiple Tool Operation | 2) inclusive hydraulic and engine oil, fuel, hoses and couplers
76765.10 Motor pumps - MPU 60-series - Trio
Motor pumps - Trio Petrol Electricspecifi cations MPU 60 PC MPU 60 PXC 3) MPU 60 DC
equipped with CORE CORE
article number 150.152.437 150.152.438 150.152.439
EN 13204 classifi cation 1) MTO MTO
number of tool connections 3 3
number of tools working simultaneously 3 3
working pressure bar / Mpa 720 / 72 720 / 72
4-stroke petrol engine 5.5 HP - 4.1 kW --
electric engine -- 230 VAC - 1.8 kW - 50 Hz - 1 Ph
pump type 3 x 2-stage radial 3 x 2-stage radial
capacity fuel tank cc 1400 --
continuous operation hours 4 no limitation
capacity oil tank cc 4000 4000
output 1st stage 0-190 bar cc/min 3 x 2110 3 x 1900
output 2nd stage 190-720 bar cc/min 3 x 660 3 x 590
weight ready for use 2) kg 50.6 54.0 55.5
dimensions (L x W x H) mm 500x372x497 500x372x497
sound emission dB(A) 84 74
temperature range -20°C - +55°C -20°C - +55°C
also available in dual hose version √ √ √
Motor pumps - Trio with hose reels
art.nr model
hoses
length colour weight dimensions
metres left right kg mm (LxWxH)
150.152.386 MPU 61 PC 15 15 • • 80.0 822x500x497
150.152.391 MPU 61 PC 15 15 • • 80.0 822x500x497
150.152.393 MPU 61 PC 20 20 • • 84.8 822x500x497
150.152.394 MPU 61 PC 20 20 • • 84.8 822x500x497
150.152.396 MPU 61 PXC 15 3) 15 • • 83.4 822x500x497
150.152.397 MPU 61 PXC 15 3) 15 • • 83.4 822x500x497
150.152.399 MPU 61 PXC 20 3) 20 • • 88.2 822x500x497
150152.400 MPU 61 PXC 20 3) 20 • • 88.2 822x500x497
150.152.389 MPU 61 DC 15 15 • • 84.9 822x500x497
150.152.383 MPU 61 DC 15 15 • • 84.9 822x500x497
150.152.388 MPU 61 DC 20 20 • • 89.7 822x500x497
150.152.384 MPU 61 DC 20 20 • • 89.7 822x500x497
MPU 61 PC 20MPU 60 DC
1) EN 13204: MTO = Multiple Tool Operation | 2) inclusive hydraulic and engine oil, fuel, hoses and couplers | 3) electric start
45 bar 260 bar 720 bar2.3 cc
7.6 cc
28 cc
7777
1) dimensions bottom plate | tested according to EN 13204
Unique three-stage hand pump
- less operating force needed at higher pressures
Ergonomic design pump handle
- adjustable in 2 positions for optimal ease of operation
HTT 1800 UC
- faster tool speed at most frequently used pressures
standard 2-stage pumps
extra output compared to 2-stage pumps
output per stroke
automatic change over pressure
Hand pumps - three stagespecifi cations HTT 1800 UC
equipped with CORE
article number 150.142.024
number of tool connections 1
working pressure bar / MPa 720 / 72
source of energy hand
capacity oil tank cc 1800
output 1st stage - 0 - 60 bar cc 28 cc
output 2nd stage - 60 - 260 bar cc 7.6 cc
output 3rd stage - 260 - 720 bar cc 3.1 cc
weight, ready for use kg 17.2
dimensions (L x W x H) 1) mm 856 x 400 x 214
temperature range -20°C - +55°C
also available in dual hose version √
Features / Benefits
5.11 Hand pumps - three stage
7878
Hand / foot pumps - two stagespecifi cations HTW 300 ABU1) HTW 700 ABU HTW 1800 C2) HTW 1800 BU2) FTW 1800 C2) FTW 1800 BU2)
equipped with single hose dual hoses CORE dual hoses CORE dual hoses
article number 150.449.001 150.442.013 150.142.021 150.142.003 150.142.022 150.142.000
number of tool connections 1 1 1 1 1 1
working pressure bar / MPa 720 / 72 720 / 72 720 / 72 720 / 72 720 / 72 720 / 72
source of energy hand hand hand hand foot foot
capacity oil tank cc 300 700 1800 1800 1800 1800
output per stroke 1st stage ccup to 50 bar -
5up to 50 bar -
11up to 45 bar -
28up to 45 bar -
28up to 45 bar -
28up to 45 bar -
28
output per stroke 2nd stage ccup to 720 bar -
1up to 720 bar -
2up to 720 bar -
2.3up to 720 bar -
2.3up to 720 bar -
2.3up to 720 bar -
2.3
weight, ready for use kg 4.0 9.1 10.8 11.5 11.3 12.0
dimensions (L x W x H) 3) mm 560 x 90 x 115 740 x 200 x 170 765 x 240 x 236 775 x 240 x 236 765 x 240 x 223 775 x 240 x 223
temperature range -20°C - +55°C
FTW 1800 BU HTW 1800 BU
HTW 300 ABU
1) for use with single acting tools only | 2) tested according to EN 13204 | 3) dimensions bottom plate (except HTW 300 ABU)
5.11 Hand / foot pumps - two stage
HTW 700 ABU
0 45 bar 720 bar
7979
1) for use with single acting tools only | 2) tested according to EN 13204 | 3) dimensions bottom plate (except HTW 300 ABU)
No pressure remains on the first stage after automatic change-over
Scraper ring protects the piston against dirt
FTW 1800 C
HTW 1800 C
- less power needed for pumping
operation force needed
-hydraulic system will not be polluted and damaged by dirt entering the plunger
Features / Benefits
5.11 Hand / foot pumps - two stage
806.1 CORE Technology (see also pages 22-25)
One hose system (hose in hose)
Turning point in safety, speed and ease of operation
low pressure return hose
high pressure hose
Saves valuable time in set up and use
Easy to handle before, during and after use
return oil
-Delivered with bend restrictors on both sides and hose binders
81
Single hose reels - CORElength weight 1) dimensions model art. nr colour model art. nr colour
m kg mm (L x W x H) left right
15 17.1 435 x 290 x 515 HR 4415 CLO 150.072.078 HR 4415 CRO 150.072.084
20 19.5 435 x 290 x 515 HR 4420 CLO 150.072.079 HR 4420 CRO 150.072.085
25 22.2 435 x 335 x 515 HR 4425 CLO 150.072.083 HR 4425 CRO 150.072.086
15 17.1 435 x 290 x 515 HR 4415 CLB 150.072.080 HR 4415 CRB 150.072.087
20 19.5 435 x 290 x 515 HR 4420 CLB 150.072.081 HR 4420 CRB 150.072.088
25 22.2 435 x 335 x 515 HR 4425 CLB 150.072.082 HR 4425 CRB 150.072.089
HR 4420 CLO HR 4520 COB
1) weight inclusive hose filled with oil and with couplers | all hose reels are according to EN 13204 and NFPA 1936
All single and double hose reels with brake system to prevent unrolling of hose during transport.All single and double hose reels with 1.2 m connection hose with bend restrictor.
Double hose reels - CORElength weight 1) dimensions model art. nr. colour model art. nr. colour
m kg mm (L x W x H)
2 x 15 33.4 435 x 565 x 515 HR 4515 COB 150.072.075 HR 4515 COO 150.072.098
2 x 20 38.3 435 x 565 x 515 HR 4520 COB 150.072.076 HR 4520 COO 150.072.099
2 x 25 43.6 435 x 655 x 515 HR 4525 COB 150.072.077 HR 4525 COO 150.072.100
Hoses - COREmodel art. nr. length m weight kg* colour
C 05 OU 150.570.042 5 2.5
C 10 OU 150.570.043 10 4.7
C 15 OU 150.570.044 15 6.9
C 20 OU 150.570.095 20 9.1
C 05 BU 150.570.045 5 2.5
C 10 BU 150.570.046 10 4.7
C 15 BU 150.570.047 15 6.9
C 20 BU 150.570.096 20 9.1
C 05 GU 150.570.057 5 2.5
C 10 GU 150.570.058 10 4.7
C 15 GU 150.570.059 15 6.9
C 20 GU 150.570.146 20 9.1
C 05 ZU 150.570.060 5 2.5
C 10 ZU 150.570.061 10 4.7
C 15 ZU 150.570.062 15 6.9
C 20 ZU 150.570.225 20 9.1
safety ratio all hoses 4 : 1 = 2880 bar
6.2 Hoses / hose reels - CORE
1) weight inclusive hoses filled with oil and with couplers | all hose reels are according to EN 13204 and NFPA 1936
* weight filled with oil and with couplers
8282
Electric hose reels - COREspecifi cations HR 4425 ACLO HR 4425 ACRB HR 4430 ACLO HR 4430 ACRB
article number 150.072.067 150.072.072 150.072.059 150.072.064
working pressure bar / MPa 720 / 72 720 / 72
electric engine VDC 24 24
rewinding of hose electric electric
dimensions (L x W x H) mm 483 x 546 x 457 483 x 546 x 457
weight, ready for use 1) kg 38.0 40.5
length of hose m 25 30
version left right left right
colour of hose
Connection hoses - COREspecifi cations C 1.5 OU C 1.5 BU C 02 OU C 02 BU C 03 OU C 03 BU
article number 150.570.049 150.570.050 150.570.123 150.570.124 150.570.125 150.570.126
length m 1.5 2 3
weight 1) kg 1.0 1.2 1.6
colour
HR 4425 ACLO
Features / Benefits
- allows for an effi cient lay out in rescue trucks - quick, easy and perfect rewinding of hose- easy to clean during rewinding
Available in left-and right version Electric driven rewinding system
6.2 Electric hose reels - CORE
1) weight inclusive hose fi lled with oil and with coupler
1) weight fi lled with oil and with couplers
83
Double hose reels - duallength weight dimensions model art. nr colour
m kg 1) mm (L x W x H) left right
15 39.5 397 x 464 x 484 HR 3515 OG 150.072.022
20 44.5 397 x 464 x 484 HR 3520 OG 150.072.023
Single hose reels - duallength weight dimensions model art. nr colour model art. nr colour
m kg1) mm (L x W x H) left right
15 19.5 397 x 242 x 484 HR 3415 LO 150.072.012 HR 3415 RG 150.072.016
20 22.0 397 x 242 x 484 HR 3420 LO 150.072.013 HR 3420 RG 150.072.017
Hoses - bundled model art. nr. length m weight kg1) colour
BVL 5 SOU 150.572.055 5 4.5
BVL 5 SGU 150.572.056 5 4.5
BVL 5 SRU 150.572.123 5 4.5
BVL 5 SBU 150.572.126 5 4.5
BVL 10 SOU 150.572.111 10 7.8
BVL 10 SGU 150.572.112 10 7.8
BVL 10 SRU 150.572.124 10 7.8
BVL 10 SBU 150.572.127 10 7.8
BVL 15 SOU 150.572.121 15 11.0
BVL 15 SGU 150.572.122 15 11.0
BVL 15 SRU 150.572.125 15 11.0
BVL 15 SBU 150.572.128 15 11.0
BVL 20 SOU 150.572.062 20 14.3
BVL 20 SGU 150.572.061 20 14.3
1) weight fi lled with oil and with couplers
All hoses inclucing quick couplers with lock-ring security and anti-kink springs on both ends.
Hoses - single model art. nr. length m weight kg1) colour
B 1 SOU 150.570.063 1 1.0
B 2 SOU 150.572.035 2 1.3
B 3 SOU 150.572.033 3 1.6
B 3 SGU 150.572.034 3 1.6
B 5 SOU 150.572.058 5 2.3
B 5 SGU 150.572.059 5 2.3
HR 3420 RG HR 3520 OG
B 3 SOUBVL 5 SOU
safety ratio all hoses 4 : 1 = 2880 bar
1) weight fi lled with oil and with couplers
6.3 Hoses / hose reels - Dual
1) weight inclusive hoses fi lled with oil and with couplers
1) weight inclusive hoses fi lled with oil and with couplersAll single and double hose reels with brake system to prevent unrolling of hose during transport.All single and double hose reels with 1.2 m connection hose with bend restrictor.
84
5
6
7
8
A
B
C
D
E
F
G
H
1
2
3
4
Basic Rapid Intervention set, consisting of:item description model art.nr. page
1 combi tool CT 4150 C 150.012.099 44
2 pulling set in case 150.582.018 44
3 ram jack RA 4331 C 150.032.046 50
4
extension pipe 165 mm 150.181.321
54extension pipe 330 mm 150.181.322
extension pipe 600 mm 150.181.323
5 ram support HRS 22 150.181.011 114
6 petrol pump SR 10 PC 1 150.152.690 67
7 hose 10 m. orange C 10 OU 150.570.043 81
Alternative set, replace items 3 and 4 for:8 telescopic RAM jack TR 4350 C 150.032.040 56
Optional set assist tools, consisting of:item description art.nr. page
A tool station 200 x 150 cm 150.182.043 120
B chocks set A 150.562.010 112
C blocks set B 150.562.004 112
D Secunet airbag safety cover 350.182.005 118
E Safetypen 350.182.088 119
F set protection covers SEP 5 150.581.676 120
G protection shield 150.182.045 119
H Glas-Master 150.182.060 118
A random selection of tools lying on a tool station.
Basic Rapid Intervention set
7.1 Advisory rescue sets
The broad range of Holmatro rescue tools, assist tools and accessories allows you to to select a combination that will match your rescue needs in the best possible way. Alternatively, you can choose between a number of advisory sets. All sets are also available in dual hose version. For the technical specifi cations of the individual items see the respective pages of this catalogue.
Alternative:
4
A
H
85
3
5
6
7
8
11
10
B
C
D
E
G
F
8
8
2
9
1
Basic Medium Rescue set, consisting of:item description model art.nr. page
1 cutter CU 4035 C NCT II 150.012.095 32
2 spreader SP 4240 C 150.012.105 40
3 set pulling attachments 150.582.006 40
4 set pulling chains 150.582.152 40
5
ram jack RA 4331 C 150.032.046 50
extension pipe 165 mm 150.181.321
54extension pipe 330 mm 150.181.322
extension pipe 600 mm 150.181.323
ram jack RA 4322 C 150.032.041 52
6 ram support HRS 22 NCT 150.003.105 113
7 Duo petrol pump SR 20 PC 2 150.152.696 68
8 hose 10 m. orange (order 2 x ) C 10 OU 150.570.043 81
Alternative set, replace items 5, 7 and 8 for:
9 telescopic ram jack TR 4350 C 150.032.040 56
10 Duo petrol pump DPU 31 PC 150.152.180 64
11hose reel with 2 x 15 m orange and blue hoses HR 4515 COB 150.072.075 81
Optional set assist tools, consisting of:item description art.nr. page
A tool station 250 x 200 cm 150.182.044 120
B chocks set A 150.562.010 112
C blocks set B 150.562.004 112
D Secunet airbag safety cover 350.182.005 118
E Safetypen 350.182.088 119
F set protection covers SEP 10 150.581.677 120
G protection shield 150.182.045 119
H Glas-Master 150.182.060 118
A random selection of tools lying on a tool station.
Basic Medium Rescue set
7.2 Advisory rescue sets
Alternatives:
4
3
1
2
5
6
7 8
86
9
10
11
12
14
13
12
Advanced Medium Rescue set, consisting of:item description model art.nr. page
1 cutter CU 4050 C NCT II 150.012.094 32
2 spreader SP 4240 C 150.012.105 40
3 set pulling attachments 150.582.006 40
4 set pulling chains 150.582.152 40
5 cutting tip (order 2 x) 150.013.703 40
6
ram jack RA 4331 C 150.032.046 50
extension pipe 165 mm 150.181.321
54extension pipe 330 mm 150.181.322
extension pipe 600 mm 150.181.323
7 set pulling attachments* 150.582.281 54
8ram jack RA 4322 C 150.032.041
52ram jack RA 4332 C 150.032.047
9 ram support HRS 22 NCT 150.003.105 113
10 mini cutter CU 4007 C 150.012.232 34
11 Duo petrol pump SR 20 PC 2 150.152.696 68
12 hose 10 m. orange (order 2 x) C 10 OU 150.570.043 81
13 hand pump HTW 1800 C 150.142.021 78
14 hose 5 m. orange C 05 OU 150.570.042 81
* use pulling chains item 4
7.3 Advisory rescue sets
Advanced Medium Rescue set
6
H
B C D E
GF
15
16
17
1819
AA
8787
18
Alternative set, replace items 6, 7, 8, 11 and 12 for:
15 telescopic ram jack TR 4340 C 150.032.039
5616
extension pipe 250 mm 150.181.330
extension pipe 450 mm 150.181.331
17 telescopic ram jack TR 4350 C 150.032.040 56
18 Duo petrol pump DPU 31 PC 150.152.180 64
19hose reel with 2 x 20 m orange and blue hoses HR 4520 COB 150.072.076 81
Optional set assist tools, consisting of:item description art.nr. page
A tool station 250 x 200 cm 150.182.044 120
B chocks set A 150.562.010 112
C blocks set B 150.562.004 112
D Secunet airbag safety cover 350.182.005 118
E Safetypen 350.182.088 119
F set protection covers SEP 10 150.581.677 120
G protection shield 150.182.045 119
H Glas-Master 150.182.060 118
A random selection of tools lying on a tool station.
7.3 Advisory rescue sets
1
2
34
5
6
88
14
8
9
10
11
13
15
12
16
17
9
17
7
Heavy Duty Rescue set, consisting of:item description model art.nr. page
1 cutter CU 4055 C NCT II 150.012.166 32
2 spreader SP 4260 C 150.012.110 42
3 set pulling attachments 150.182.021 42
4 set pulling chains 150.582.261 42
5 cutting tip (order 2 x) 150.013.166 42
6
ram jack RA 4331 C 150.032.046 50
accessories in box 150.582.008 54
set pulling chains in box 150.582.021 54
ram jack RA 4322 C 150.032.041 52
ram jack RA 4332 C 150.032.047 52
7 ram support HRS 22 NCT 150.003.105 113
8 mini cutter CU 4007 C 150.012.232 34
9 wedge jack PW 4624 C 150.062.046 106
10 special materials cutter SMC 4006 C 150.012.189 104
11 petrol pump SPU 16 PC 150.152.671 62
12 hose 5 m. orange C 05 OU 150.570.042 81
13 Duo petrol pump SR 20 PC 2 150.152.696 68
14 hose 10 m. orange (order 2 x) C 10 OU 150.570.043 81
15 hand pump HTW 1800 C 150.142.021 78
16 hose 5 m. orange C 05 OU 150.570.042 81
17 hand operated combi tool HCT 4120 150.012.146 91
7.4 Advisory rescue sets
Heavy Duty Rescue set
H
B C D E
GF
19
20
21 22
AA
18
8989
21
Alternative set, replace items 6, 13 and 14 for:
18 telescopic ram jack TR 4340 C 150.032.039
5619
extension pipe 250 mm 150.181.330
extension pipe 450 mm 150.181.331
20 telescopic ram jack TR 4350 C 150.032.040 56
21 Duo petrol pump DPU 31 PC 150.152.180 64
22hose reel with 2 x 20 m. orange and blue hoses HR 4520 COB 150.072.076 81
Optional set assist tools, consisting of:item description art.nr. page
A tool station 250 x 200 cm 150.182.044 120
B chocks set A 150.562.010 112
C blocks set B 150.562.004 112
D Secunet airbag safety cover 350.182.005 118
E Safetypen 350.182.088 119
F set protection covers SEP 10 150.581.677 120
G protection shield 150.182.045 119
H Glas-Master 150.182.060 118
A random selection of tools lying on a tool station.
7.4 Advisory rescue sets
9090
180°
Cutter - accessoriesdescription art. nr.
carrying strap 150.582.506
carrying harness 150.553.115
carrying / storage case 150.003.377
Features / Benefits
No separate pump and hose needed Handle can rotate 180° and be folded up
- ideal in confi ned spaces
Hand-operated cutter
specifi cations HCU 4010 GP
article number 150.012.147
EN 13204 classifi cation AC116-D-10.3
max. working pressure bar / MPa 720 / 72
blade opening mm 142
cutting force kN / t 254 / 25.9
round bar (acc. to EN 13204) mm 24
weight, ready for use kg 10.3
dimensions (L x W x H mm 645 x 205 x 181
360O rotatable and fold fl at pump handle √
temperature range -20°C - +55°C
hydraulic safety factor 2 x max. working pressure of 720 bar = 1440 bar
endurance test tool 1000 cycles of biting in material that cannot be cut
8.1 Self-contained tools - Hand-operated cutter
HCU 4010 GP
9191
Cutter - accessoriesdescription art. nr.
carrying strap 150.582.506
carrying harness 150.553.115
carrying / storage case 150.003.377
Combi tool - accessoriesdesription art.nr.
set pulling attachments 1) 150.582.551
2 set pulling chains 3m + 1.5 m 1) 150.582.152
case with set pulling attachments and pulling chains 1) 150.582.028
carrying / storage case 150.003.377
carrying harness 2) 150.553.115
carrying strap 2) 150.582.506
Hand-operated combi tool
specifi cations HCT 4120
article number 150.012.146
EN 13204 classifi cation BK26/268-E-10.8
max. working pressure bar / MPa 720 / 72
spreading mm 268
max. spreading force kN / t 220 / 22.4
min. spreading force 1) kN / t 26 / 2.7
cutting opening mm 191
cutting force kN / t 247 / 25.2
round bar ( acc to EN 13204 ) mm 24
squeezing force kN / t 46 / 4.7
pulling distance mm 181
pulling force kN / t 61 / 6.2
weight, ready for use kg 10.8
dimensions (L x W x H) mm 698 x 205 x 181
360O rotatable and fold fl at pump handle √
temperature range -20°C - +55°C
hydraulic safety factor 2 x max. working pressure of 720 bar = 1440 bar
endurance test tool 1000 cycles of spreading while the tool is loaded and 1000 cycles of biting in material that cannot be cut
Features / Benefits
- spreading, cutting, squeezing and pulling- easy to carry over difficult terrain- easy to manoeuvre
Non-slip carrying handle and perfect balance Multi functional
8.2 Self-contained tools - Hand-operated combi tool
HCT 4120
1) according to EN 13204: 25 mm from tips over full spreading range | tested according to EN 13204 and NFPA 1936
1) see also page 442) see also page 92
92928.2 Self-contained tools - Hand-operated combi tools
1) according to EN 13204: 25 mm from tips over full spreading range
Hand-operated combi tools
specifi cations HCT 5111 HCT 5111 RH HCT 5117 HCT 5117 RH
article number 150.012.262 150.012.258 150.012.263 150.012.259
max. working pressure bar / Mpa 720 / 72 720 / 72
spreading mm 281 431
max. spreading force kN / t 457 / 46.6 54 / 5.5
min. spreading force 1) kN / t 48 / 4.9 28 / 2.9
cutting opening mm 196 352
cutting force kN / t 206 / 21 204 / 20.8
round bar (acc. to EN 13204) mm 24 24
squeezing force kN / t 44 / 4.5 27 / 2,8
pulling distance mm -- 426
pulling force kN / t -- 30 / 3.1
weight ready for use kg 8.7 9.4
dimensions (LxWxH) mm 540x287x193 540x223x145 626x287x193 626x223x145
i-Bolt technology √ √ √ √
carrying handle with integrated lighting √ -- √ --
360° rotatable & fold flat carrying handle -- √ -- √
360° rotatable & fold flat pump handle √ √ √ √
temperature range -20°C - +55°C
hydraulic safety factor 2 x max. working pressure of 720 bar = 1440 bar
endurance test tool 1000 cycles of spreading while the tool is loaded and 1000 cycles of biting in material that cannot be cut
HCT 5117 RH
Hand-operated combi tools - accessories
for models HCT 5111 HCT 5111 RH HCT 5117 HCT 5117 RH
1 carrying harness 150.553.115 150.553.115 150.553.115 150.553.115
2 carrying strap 150.582.506 150.582.506 150.582.506 150.582.506
3 set pulling attachments -- -- 150.182.241 150.182.241
4 set pulling chains, 1.5 m + 3.0 m -- -- 150.582.548 150.582.548
5 carrying/storage bag 150.182.228 150.182.227 150.182.228 150.182.227
1 3 4
5
2
HCT 5111 RH
HCT 5117 RH
HCT 5117
93938.2 Self-contained tools - Hand-operated combi tools
Features / Benefits
Extremely compact & ultra-lightweight
Non-slip selection ring
Self-contained and ergonomic
Multifunctional
-5117 models also suitable for pulling - suitable for a variety of operations, from rapid intervention to USAR -you can cut/spread open a modern vehicle with just one tool - suitable for dive operations / under water use
HCT 5111
-weights only 8.7 to 9.4 kg -easy to carry, handle, transport and store - ideal for use in confi ned spaces or at remote locations
-easy, intuitive selection of cutting or spreading function -offers good grip
- rapid deployment: simply fold out the pump handle and start pumping -pump handle 360° rotatable and lockable in 22 positions for use of the tool in any position -pump handle also fl at foldable for compact transportation and storage
Optional: 360° rotatable, flat foldable carrying handle
- continuous swivel with 11 locking positions for use of the tool at almost any angle -collapsible for extra compact transporation and storage
Small insertion height with high spreading force
9494
Features / Benefits
8.3 Self-contained tools - hand operated wedge
HPW 4624
-easy carrying and storage
Hand-operated Power Wedge
specifi cations HPW 4624
article number 150.062.132
max. working pressure bar / MPa 720 / 72
cylinder double acting
min. insertion height mm 6
max. lifting height mm 51
spreading force kN / t 253 / 25.8
wedge angle 15°
weight ready for use kg 11.8
dimensions (L x W x H) mm 713 x 270 x 197
carrying handle with integrated lighting √
temperature range -20°C - +55°C
A Power Wedge is the fi rst tool to use in a lifting operation. It creates an initial gap for positioning other equipment such as spreaders or lifting bags.
A Power Wedge is the fi rst tool to use in a lifting
easy carrying and storage Enough space created to insert other lifting equipment
Self-containedHandle foldable and rotatable
- can be used in any position
-also easy to use in confi ned spaces
Power Wedge - accessoriesdescription art. nr.
carrying strap 150.582.506
carrying harness 150.553.115
carrying / storage case 150.003.375
9595
Battery driven cutters - exclusive battery
specifi cations GCU 4035 NCT II GCU 4050 NCT II
article number 150.052.031 150.052.027
max. working pressure bar / MPa 720 / 72 720 / 72
blade opening mm 159 181
cutting force kN / t 355 / 36.2 927 / 94.5
round bar (acc. to EN 13204) mm 32 41
weight ready for use 1) kg 19.2 22.7
dimensions (LxWxH) mm 829x297x217 890x297x217
i-Bolt technology √ √
carrying handle with integrated lighting √ √
temperature range -20°C - +55°C
hydraulic safety factor 2 x max. working pressure of 720 bar = 1440 bar
endurance test tool 1000 cycles of biting in material that cannot be cut
endurance test dead man's handle 6000 cycles1) inclusive battery
Battery driven cutters - accessoriesdescription art. nr.
battery charger BCH 1 (220 - 240 VAC) 150.182.208
battery charger BCH 2 (100 - 120 VAC) 150.182.209
mains power connector BMC 1 (220 - 240 VAC) 150.182.206
mains power connector BMC 2 (100 - 120 VAC) 150.182.207
battery pouch 150.182.214
carrying harness 150.553.115
carrying/storage bag 150.182.228
carrying strap 180.182.249
Features / Benefits - Greenline battery driven tools
Powered by lithium-ion battery technology Ergonomic and user-friendly
-well-balanced -control handle on back of tools so you can rotate them freely while your hand stays in the same position -battery on top of tools: Easy to change, even in narrow spaces
-high battery capacity for long operation time - low self-discharge rate for long battery life -no memory effect -no energy consumption when idle -LED indicator shows battery capacity during use; when tool is not used or when battery is not on tool, press button on battery to check state of charge level -battery 100% rechargeable in 60 minutes -easy click-on / click-off system on top to change battery with one hand, within seconds - suitable for air transportation - suitable for use at high altitudes
GCU 4050 NCT II
8.4 Self-contained tools - Greenline battery driven cutters
Batteries - required articlesdescription art. nr.
battery BPA 28-4 (4.1 Ah) 150.005.214
battery BPA 28-3 (3.0 Ah) 150.005.823
1) 25 mm from the tips | 2) according to EN 13204: 25 mm from tips over full spreading range | 3) inclusive battery
96968.5 Self-contained tools - Greenline battery driven spreader
Battery driven spreader - exclusive battery
specifi cations GSP 4240
article number 150.052.026
max. working pressure bar / Mpa 720 / 72
spreading mm 686
max. spreading force kN / t 206 / 21.0
max. spreading force 1) kN / t 73 / 7.4
min. spreading force 2) kN / t 43 / 4.4
squeezing force kN / t 65 / 6.6
pulling distance mm 466
pulling force kN / t 90 / 9.2
weight ready for use 3) kg 23.3
dimensions (LxWxH) mm 884x316x232
built-in Speed Valve √
carrying handle with integrated lighting √
temperature range -20°C - +55°C
hydraulic safety factor 2 x max. working pressure of 720 bar = 1440 bar
endurance test tool 1000 cycles of spreading and pulling while the tool is loaded
endurance test dead man's handle 6000 cycles
Battery driven spreader - accessoriesdescription art. nr.
battery charger BCH 1 (220 - 240 VAC) 150.182.208
battery charger BCH 2 (100 - 120 VAC) 150.182.209
mains power connector BMC 1 (220 - 240 VAC) 150.182.206
mains power connector BMC 2 (100 - 120 VAC) 150.182.207
spreading tip, with extra long tooth 150.183.189
cutting tip 150.013.703
set pulling attachments 150.582.006
set pulling chains, 1.5 m + 3.0 m 150.582.152
set pulling chains, in case 150.582.021
battery pouch 150.182.214
carrying harness 150.553.115
carrying strap 180.182.249
Features / Benefits - Greenline battery driven tools
Emission-free
All weather proof
- suitable for use at below zero temperatures, up to -20°C -suitable for use in wet weather conditions
-no fumes from a pump: healthier for rescuers and victims - ideal for use in confi ned and/or underground spaces like tunnels, busses, trains and collapsed buildings -environmentally friendly
GSP 4240
Batteries - required articlesdescription art. nr.
battery BPA 28-4 (4.1 Ah) 150.005.214
battery BPA 28-3 (3.0 Ah) 150.005.823
97978.6 Self-contained tools - Greenline battery driven rams
Features / Benefits - Greenline battery driven tools
GRA 4321
1) inclusive battery
GRA 4321
Battery driven rams - exclusive battery
specifi cations GRA 4321 GRA 4331
article number 150.052.029 150.052.028
operator type battery battery
number of plungers 1 1
max. working pressure bar/Mpa 720 / 72 720 / 72
spreading force over full stroke kN / t 161 / 16.4 161 / 16.4
spreading / pulling stroke mm 250 350
retracted length mm 566 691
extended length mm 816 1041
pulling force over full stroke kN / t 50 / 5.1 50 / 5.1
weight excl. battery kg 17.5 18.3
weight, ready for use 1) kg 18.4 19.2
dimensions (LxWxH) mm 566 x 452 x 234 691 x 452 x 234
temperature range -20 °C + 55 °C -20 °C + 55 °C
sound emission at 4 m / 1m (loaded) dB(A) 65 / 74 65 / 74
Battery driven rams - accessories
description art. nr.
Battery charger BCH 1, 220-240V 150.182.208
Battery charger BCH 2, 100-120V 150.182.209
Mains power connector BMC 1 150.182.206
Mains power connector BMC 2 150.182.207
Battery pouch 150.182.214
Ram support HRS 22 NCT 150.003.105
Ram support HRS 22 150.181.011
Extension pipe 165 mm 150.181.321
Extension pipe 330 mm 150.181.322
Extension pipe 600 mm 150.181.323
Wedge piece 150.181.324
Conical tip 150.181.325
Base plate round 150.181.326
Connection piece 150.181.327
Pulling chains set 1.5m + 3.0m 150.582.152
Pulling chains set, in case 150.582.021
Accessories set, in case 150.582.008
Pulling attachments set 150.582.281
Rim adapter set, in case 150.182.580
Batteries - required articlesdescription art. nr.
battery BPA 28-4 (4.1 Ah) 150.005.214
battery BPA 28-3 (3.0 Ah) 150.005.823
Carrying handle with integrated LED lighting
-provides illumination when rescue scene lighting is (still) absent -never work in your own shadow by day
- including different heads, a base plate, ram supports and pulling accessories - to increase your options in various rescue situations
Wide variety of other accessories
1) according to EN 13204: 25 mm from tips over full spreading range | 2) inclusive battery
Battery driven combi tools
specifi cations GCT 4120 GCT 4150 GCT 5111 GCT 5117
article number 150.052.038 150.052.032 150.052.036 150.052.037
max. working pressure bar / Mpa 720 / 72 720 / 72 720 / 72 720 / 72
spreading mm 268 360 281 431
max. spreading force kN / t 220 / 22.4 211 / 21.5 457 / 46.6 54 / 5.5
min. spreading force 1) kN / t 26 / 2.7 35 / 3.6 48 / 4.9 28 / 2.9
cutting opening mm 191 229 196 352
cutting force kN / t 247 / 25.2 380 / 38.7 206 / 21 204 / 20.8
round bar (acc. to EN 13204) mm 24 32 24 24
squeezing force kN / t 46 / 4.7 76 / 7.7 44 / 4.5 27 / 2.8
pulling distance mm 181 416 -- 426
pulling force kN / t 61 / 6.2 51 / 5.2 -- 30 / 3.1
weight ready for use 2) kg 14.5 19.9 13.7 14.4
dimensions (LxWxH) mm 789x297x207 901x297x212 677x295x204 775x295x204
i-Bolt technology -- √ √ √
carrying handle with integrated lighting √ √ √ √
temperature range -20°C - +55°C
hydraulic safety factor 2 x max. working pressure of 720 bar = 1440 bar
endurance test tool 1000 cycles of spreading while the tool is loaded and 1000 cycles of biting in material that cannot be cut
endurance test dead man's handle 6000 cycles
Battery driven combi tools - accessories
for models GCT 4120 GCT 4150 GCT 5111 GCT 5117
1 battery charger BCH 1 (220 - 240 VAC) 150.182.208 150.182.208 150.182.208 150.182.208
2 battery charger BCH 2 (100 - 120 VAC) 150.182.209 150.182.209 150.182.209 150.182.209
3 mains power connector BMC 1 (220 - 240 VAC) 150.182.206 150.182.206 150.182.206 150.182.206
4 mains power connector BMC 2 (100 - 120 VAC) 150.182.207 150.182.207 150.182.207 150.182.207
5 set pulling attachments 150.582.551 150.582.026 -- 150.182.241
6 set pulling chains, 1.5 m + 3.0 m 150.582.152 150.582.152 -- 150.582.548
7 pulling set, in case 150.582.028 150.582.018 -- --
8 battery pouch 150.182.214 150.182.214 150.182.214 150.182.214
9 carrying harness 150.553.115 150.553.115 150.553.115 150.553.115
10 carrying strap 180.182.249 180.182.249 180.182.249 180.182.249
11 carrying/storage bag 150.182.228 150.182.228 150.182.228 150.182.228
9
5 6
1111
1-2
1087
98988.7 Self-contained tools - Battery driven combi tools
3-4
Batteries - required articlesdescription art. nr.
battery BPA 28-4 (4.1 Ah) 150.005.214
battery BPA 28-3 (3.0 Ah) 150.005.823
1-2
GCT 4120
99998.7 Self-contained tools - Greenline battery driven combi tools
Features / Benefits - Greenline battery driven combi tools 5000-series
Optimal performance to weight ratio Equipped with iBolt
- fl at central bolt construction for better access to narrow spaces - squeezes the blades together directly, which resluts in less blade separation and a better cutting performance
GCT 5111
-extremely high spreading force compared to size and weight (model GCT 5111) -extremely high spreading distance compared to size and weight (model GCT 5117) -high cutting force compared to size and weight (both models) Multifunctional
-one tool for cutting, spreading and squeezing -model GCT 5117 also suitable for pulling - suitable for a variety of operations, from rapid intervention to USAR -you can gain access to a modern vehicle with just one tool* - your choice: GCT 5111 for highest spreading force, GCT 5117 for highest spreading distance
* tested on a 2014 model Opel Insignia, avoiding the pillars
Lowest sound level
- less stressful for victims -easier communication between rescuers and victims -equipment produces no sound when idle
Self-contained
- for optimal freedom of movement - rapid deployment: simply press the start button and start working
1
9
8
2 3
4
65
7
1001009.1 Door openers
- easy to store and easy to transport
- accessories can be mounted within seconds
Door opener HDR 50
specifi cations HDR 50
article number 150.061.002
spreading jack pushing jack
max. working pressure bar / MPa 720 / 72 720 / 72
capacity kN / t 47 / 4.8 51 / 5.2
return of plunger spring return gravity return
hydraulic system single acting single acting
pushing length mm -- 300
min. length including grip heads mm 710 --
mechanically extendible in 4 steps of 50 mm mm 50 - 100 - 150 -200 --
hydraulically extendible mm 125 --
max. width between doorposts (excl. extension) mm 1035 --
max. width between doorposts (incl. extension) mm 1310 --
weight, ready for use kg 11.0
required oil content (effective) cc 295
temperatue range -20°C - +55°C
hydraulic safety factor 2 x 720 bar = 1440 bar
safety factor hoses 4:1= 2880 bar
Door opener HDR 50 consisting of
synthetic carrying/storage box, dimensions in mm (L x W x H) 600 x 400 x 184
hydraulic spreading jack with 2 steel grip heads, mounted with blue hose 2 m. with standard coupler
hydraulic pushing jack, mounted with: - aluminium pushing plate and with
rectangular 150 x 50 mm, black
- connection hose, length 1.76 m.
red, with standard coupler
adjustable carrying strap black
Door opener HDR 50 - accessories - with unique quick lock system item art.nr.
extension piece 275 mm, black. To be mounted on the end of the spreading jack to increase the maximum reach. 1 150.063.031
steel grip head with extra long tooth. Provides extra grip on narrow doorposts. The extra long tooth penetrates the crack between door and doorpost. 2 150.063.011
steel round grip head. With recess for round pushing plate. 3 150.000.262
steel grip head with extra long tooth. With recess for round pushing plate. Provides extra grip on narrow doorposts. The extra long tooth penetrates the crack between door and doorpost.
4 150.000.259
steel wedge head. To be used on narrow or slippery (steel) doorposts. 5 150.063.010
steel corrugated grip head. With recess for round pushing plate. 6 150.000.261
steel rectangular pushing plate, with rubber layer, 150 x 50 mm. For weak, fl exible doors, open structure doors, gates etc. 7 150.063.032
steel round pushing plate, with rubber layer. For use in combination with recessed grip heads. 8 150.000.266
operating set DCV 720 U with orange hose 2 m. In case another single acting pump is used. 9 150.061.005
Door opener HDR 50 - pump
hand pump with operating set, model HTW 700 ADCV
article number 150.062.009
max. working pressure bar / MPa 720 / 72
pump two-stage
usable oil contents cc 700
weight, ready for use kg 8.0
temperature range -20°C - +55°C
see also HTW 700 ABU, page 78
Pump supplied with 2 m. orange hose connecting the operating valve DCV 720 U to the pump.
HTW 700 ADCV
1
9
8
2 3
4
65
7
Versatile and lightweight Many possibilities to adapt to every size door
-opens every inward opening door, regardless of locks, door-chains or catches, in less than 30 seconds -extra long stroke of 300 mm will also brake longer chains - easy to carry and very quick to install
Features / Benefits
HDR 50
Quick-lock connection system
spreading
pushing
- spreading jack manually extendible in 4 positions over 200 mm and hydraulically extendible with extra 125 mm
-accessories can be changed in a second
1019.1 Door openers
360°
1029.1 Door openers
Recommended pumps
specifi cations HTW 300 ABU AHS 1400 FDU
article number 150.449.001 150.602.001
max. working pressure bar / MPa 720 / 72 720 / 72
weight ready for use kg 4.0 6.5
see also page 78 76
For single hoses see page 83.
Features / Benefits
Versatile
High pushing force
Rotatable handle
-opens doors and breaks door-chains very quickly
-360° rotatable handle for optimal ease of installation
Door opener HDO 100
specifi cations HDO 100
article number * 150.062.007
max. working pressure bar / MPa 720 / 72
hydraulic system single acting
spreading force kN / t 100 / 10.2
retracted length mm 300
stroke mm 130
max. length mm 430
weight, ready for use kg 6.7
dimensions (L x W x H) mm 300 x 120 x 154
required oil content cc 207
temperature range -20°C - +55°C
* 150.062.007 = with rotating hose connection and handle, delivered in synthetic carrying / storage box 150.062.008 = with 30 cm. pigtail hose, without handle 150.062.123 = with fl exible 360° rotating connection hose , length 30 cm, and rotating handle + hand pump HTW 300 ABU + 3 m single hose B 3 SOU in synthetic carrying box.
-opens every inward opening door, regardless of locks, door-chains or catches in less than 30 seconds
150.062.007
150.062.008
150.062.123
CC 20 C
Concrete crusher
specifi cations CC 20 C
equipped with CORE
article number 150.012.234
max. working pressure bar / MPa 720 / 72
max. opening mm 230
crushing force kN / t 68 / 6.9
shape of tip pointed
required oil content cc 132
weight ready for use kg 22.9
dimensions (L x W x H) mm 880 x 440 x 210
temperature range -20°C - +55°C
also available in dual hose version √
Ideal combination Limited dust
Features / Benefits
CC 20 C
1031039.2 Concrete Crusher
-designed to quickly break away large, thick pieces of concrete
-a perfect combination: crushing concrete with the CC 20 C and cutting re-bar with mini cutter CU 4007 C (or SMC 4006 C).
- supports a clear view at the rescue scene
Heavy duty
360°
100 HRb = 22 HRcHR
b
HR
c
Ø 8.5 mm
Ø 12 mm
Ø 16 mm
Ø 20 mm
130
100
75
50
25
0
22304050
6068
75 HRb
60 HRc
49 HRc
28 HRc
104104
Special Materials Cutter
specifi cations SMC 4006 C
equipped with CORE
article number 150.012.189
max. working pressure bar / Mpa 720 / 72
blade opening mm 25
max. cutting force kN / t 193 / 19.7
weight, ready for use kg 6.8
dimensions (L x W x H) mm 389 x 114 x 234
required oil content cc 10
temperature range -20°C - +55°C
also available in dual hose version √SMC 4006 C
Features / Benefits
- easy to carry, also over rough terrain
Lightweight Special blade and jaw design
- re-bar, chain and padlock can easily be cut - for use in confined spaces
Compact
Adjustable rotating carrying handle
- easy to use in any position - simplifies cutting at various angles - for easy positioning in confined spaces
Application
Re-bar
Padlock
Chain
Cutting performance
Materials according to EN
13204; S235
Materials exceeding EN13204 in terms of
hardness
Cutting performance
9.3 Special Materials Cutter
Special Materials Cutter - accessoriesdescription art. nr.
carrying / storage case 150.003.379
2
3
4
1
105105
Minicutter HMC 8 U in various versions1 with fi xed coupler 150.012.025
2 with 30 cm. pigtail hose in synthetic case 150.012.026
3with 360° rotation elbow and 30 cm pigtail hose in synthetic case
150.012.027
4with 360° rotation elbow and hand pump HTW 300 ABU, mounted with 2 m. hose, in synthetic case
150.012.028
-easy to use in confined and difficult te reach spaces -cuts car pedals, steering wheels etc.
Compact and lightweight 8 tons capacity
Features / Benefits
Minicutter
specifi cations HMC 8 U
article number 150.012.025
max. working pressure bar / MPa 720 / 72
cylinder (spring return) single acting
max. cutting force kN / t 79 / 8.1
max. depth of jaw mm 40
width of jaw mm 40
weight, ready for use kg 3.0
dimensions (L x W x H) mm 333 x 62 x 86
required oil content cc 43
temperature range -20°C - +55°C
For required hand pump HTW 300 ABU or bigger see page 78. For single hoses see page 83.
9.4 Minicutter
For required hand pump HTW 300 ABU or bigger see page 78.For hoses see pages 81.
106106
Power Wedge - accessoriesdescription art. nr.
carrying / storage case 150.003.375
Features / Benefits
Just 6 mm insertion height Lifting height 51 mm
- can be inserted in places where no other lifting device can be used
- enough to free trapped victims or to install a Holmatro spreader or high pressure lifting bag
Power Wedge
specifi cations PW 4624 C
equipped with CORE
article number 150.062.046
max. working pressure bar / MPa 720 / 72
cylinder double acting
min. insertion height mm 6
max. lifting height mm 51
spreading force kN / t 253 / 25.8
wedge angle 15°
weight, ready for use kg 9.5
dimensions (L x W x H) mm 672 x 225 x 186
required oil content cc 122
temperature range -20° C - +55° C
also available in dual hose version √
PW 4624 C
9.5 Power Wedge
60 mm
107107
Features / Benefits
Easy to install
Environmentally friendly
Large squeeze surface
Prevents/limits potentially dangerously situations
- squeezes pipes with a maximum diameter of 60 mm
-saves costs in case of fire or other emergency
-can be opened and closed by hand very quickly without any tools
- limits leaking of dangerous liquids
HPS 60 AU
9.6 Pipe squeezer
Pipe squeezer
specifi cations HPS 60 AU
article number 150.182.024
max. working pressure bar / MPa 720 / 72
cylinder (spring return) single acting
max. squeezing force kN / t 147 / 15.0
max. outside diameter pipe mm 60
max. wall thickness pipe mm 4
remaining opening mm 2
weight, ready for use kg 8.6
dimensions (L x W x H) mm 420 x 216 x 155
required oil content cc 130
temperature range -20°C - +55°C
For required hand pump HTW 300 ABU or bigger see page 78. For single hoses see page 83.
108108
Features / Benefits
- easy to install around cables
HWC 16 R
HWC 25 R
HWC 32 R
HCC 100 R
All models with hardened cutting blade
Delivered in carrying bagAll models can be folded open in a second
- longer life span
HCC 85 R
9.7 Cable cutters
Cable cutters Steel cable cutters Electric cable cutters
specifi cations HWC 16 R HWC 25 R HWC 32 R HCC 85 R HCC 100 R
article number 150.012.266 150.012.267 150.012.268 150.012.269 150.012.270
working pressure bar / MPa 720 / 72 720 / 72 720 / 72 720 / 72 720 / 72
capacity kN / t 52 / 5.3 146 / 14.9 249 / 25.4 49 / 5 87 / 8.9
max. jaw opening mm 20 50 32 85 100
capacity steel cable 6 x 19 Ø mm 20 30 32 - -
capacity solid steel Ø mm 13 19 25 - -
capacity ground cable Ø mm 18 50 32 50 75
capacity telephone cable Ø mm - - - 85 100
weight, ready for use kg 2.0 8.4 8.9 6.8 12.7
dimensions (L x W x H) mm 260 x 54 x 75 441 x 91 x 210 358 x 90 x 156 501 x 77 x 245 545 x 86 x 263
required oil content cc 49 106 135 65 140
temperature range -20°C - +55°C
For required hand pump HTW 300 ABU or bigger see page 78. For single hoses see page 83.
HWC 16 R
109109109
10 t
12 t
- longer life span
Features / Benefits
High lifting power
Compact and lightweight rescue lifting jack can be used with:
- hand pump HTW 700 ABU and single hose (for technical details see pages 78 and 83)
-hand pump HTW 1800 ABU and single hose (for technical details see pages 78 and 83)
-hand pump HTT 1800 U and single hose (for technical details see pages 77 and 83)
HTW 1800 ABU HTT 1800 UHTW 700 ABU
9.8 Toe jack
Toe jack
specifi cations TJ 3610
article number 150.012.049
working pressure bar / MPa 720 / 72
max. lifting capacity on saddle kN / t 118 / 12.0
max. lifting capacity on toe kN / t 98 / 10.0
closed height mm 448
lifting height / plunger stroke mm 250
max. lifting height on saddle mm 698
min. insertion height toe mm 56
max. lifting height on toe mm 306
weight, ready for use kg 20.5
dimensions (L x W x H) mm 300 x 160 x 448
required oil content cc 415
temperature range -20°C - +55°C
TJ 3610
110110
Features / Benefits
Working as a team
Compact jacks with 2 large handles
Jacks with tilting saddle
- larger model fi ts in opening created by the smaller model
- easy to install in small spaces in even the most diffi cult circumstances
-adapt themselves to loads at an angle of 5° maximum
HLJ 50 A 6
HLJ 50 A 10
9.9 Aluminium jacks
Aluminium jacksspecifi cations HLJ 50 A 6 HLJ 50 A 10
article number 150.112.060 150.112.059
working pressure bar / MPa 720 / 72 720 / 72
return of plunger * air air
lifting capacity kN / t 510 / 52 510 / 52
closed height mm 150 196
stroke mm 61 104
weight, ready for use kg 7.0 8.7
dimensions ( L x W x H ) mm 279 x 214 x 150 279 x 214 x 196
required oil content cc 432 709
temperature range -20°C - +55°C -20°C - +55°C
*Return of the plunger by the 6 bar air pressure in the jack. Easy to fi ll with air pump HAP 10 U (art.nr. 350.542.005) when the unloaded return becomes slower.For required hand pump see page 78. For single hoses see page 83.
1 2
3
4
56 7
8
910
11
12
14
13
15
16
111
Hydraulic jack set HRK 10 U, art. nr. 150.062.011, consisting of:
Both jacks with standard saddle for normal lifting applications. Both jacks have thread on the plunger head, on the jack housing and in the jack base to screw on the various accessories. Never use a jack without an accessory mounted on the plunger head.Jacks are single acting with spring return.
*Spreading force is over the full spreading range, measured at 10 mm from the tip. Wedge is single acting with spring return.
On the pump a hydraulic hose is mounted, length 2 meters, with anti-kink springs on both ends and a quick coupler on the end.
9.10 Hydraulic jack set
Hydraulic jacks HCJ 10 S 6 HCJ 10 S 15
specifi cations nr. 13 nr. 14
article number 150.062.114 150.062.115
working pressure bar / MPa 720 / 72 720 / 72
max. lifting capacity kN / t 99 / 10.1 99 / 10.1
closed height mm 202 292
stroke plunger mm 60 150
weight, ready for use kg 3.5 5.1
required oil content cc 83 207
temperature range -20°C - +55°C
Hydraulic wedge HW 1000
specifi cations nr. 15
article number 150.562.012
working pressure bar / MPa 720 / 72
minimum insertion height mm 15
maximum lifting height mm 90
spreading force * kN / t 10 / 1.0
weight, ready for use kg 2.1
required oil content cc 10
temperature range -20°C - +55°C
Hydraulic hand pump HTS 550 A
specifi cations nr. 16
article number 150.142.033
working pressure bar / MPa 720 / 72
oil content cc 550
weight, incl. oil kg 6.0
Accessoriesitemqty. description art. nr.*
1 1 plunger toe to push out of centre. Attention: max. capacity 5 tons only! 150.581.662
2 1 jack toe to push out of centre. Always to be used with plunger toe nr.1. 100.581.515
3 2 fl at base to mount on the bottom side of the jacks. Provides a larger base. 100.181.512
4 1 spreading head 100.581.525
5 2 cross head for even better grip 100.181.516
6 2 connection socket, 2 x female thread. To connect 2 extension pipes. 100.181.510
7 2 connection nipple, 2 x male thread. To connect 2 items with female thread. 100.181.515
8 1 extension pipe 125 mm to be mounted only on the bottom side of the
jacks
100.181.501
9 1 extension pipe 250 mm 100.181.502
10 1 extension pipe 500 mm 100.181.503
11 1 extension pipe 750mm 100.181.504
12 1 steel storage / carrying case 150.581.001
*art. nr. per 1 piece
95
150
755
270
23075
75B
150230
75
2 x B
2 x A
2 x C
holmatro®
23075
75 150230
75
2 x B
2 x C
25 230
50
75
2 x D
2 x F2 x E
holmatro®
holmatro®
holmatro®
112112
Features / Benefits
Made of recycled polyethylene - environment-friendly, 100% re-usable One-piece moulding - virtually indestructible, longer life span than hardwood
Interlocking profi le - do not slip away thanks to unique profi le design
Non-absorbent material - water- and oil-resistant
Lightweight - fl oats on water
Higher allowable surface pressure than wood - 100 kg/cm2 in all directions
20% higher friction coeffi cient than wood - more grip
Chocks & Blocks
SET A - art. nr. 150.562.010
item qty. description weight kg art. nr.*
A 2 step chock 6.3 150.563.060
B 2 wedge small 0.5 150.563.049
C 2 wedge large 1.0 150.563.050
SET B - art. nr. 150.562.004
item qty. description weight kg art. nr.*
B 2 wedge small 0.5 150.563.049
C 2 wedge large 1.0 150.563.050
D 2 lock block low 1.0 150.563.061
E 2lock block medium
2.0 150.563.071
F 2 lock block high 3.0 150.563.073
10.1 Assist tools
*art. nr. per 1 piece
Set A:
Set B:
Ram supportspecifi cations HRS 22 NCT
article number 150.003.105
maximum load kN / t 220 / 22.4
dimensions (L x W x H) mm 450 x 150 x 280
weight ready for use kg 14.9
- for wider door sills and B-pillars of new model cars
- vertical position in small door opening -horizontal position in large door opening
Features / Benefits
Wider ram support
11311310.2 Assist tools
- the ram always stays centrally positioned -prevents tilting of ram support
- ensures that the ram support will not slip or tilt - also perfect for use on smaller sills and B-pillars of older model cars
Teeth provide grip
Bars with profile
Can be used in different orientations
114
Offers a stable ramming platform
Side plates widen out at the base
Three different ramming platforms
- force of the ram is distributed over a larger area -a larger opening can be created with 1 ram - ram can be positioned both horizontally and vertically
- fi ts every door post
Features / Benefits
Ram supportspecifi cations HRS 22
article number 150.181.011
maximum load kN / t 216 / 22
dimensions (L x W x H) mm 400 x 106 x 240
weight, ready for use kg 7.7
10.2 Assist tools
12
3
4
5
115115
Rim adapter consisting of:nr. description art. nr.
1Tilting saddle that can be mounted on the head of a ram
150.182.047
2Adapter for rim and steering column to be mounted on the other side of the ram
150.181.328
3Support plate to provide a solid base for the ram, even in loose soil
150.011.519
4Two tensioning belts to secure the support plate to the truck
390.511.073
5 Synthetic storage and carrying case 150.581.078
The rim adapter set fi ts on every 16.4 tons Holmatro ram.See pages 50 and 52.
Can be installed without the rescuer having to move under the truck
Versatile
Lifting operation can be controlled precisely with the deadmans handle of the ram
- steering columns of trucks can also be pushed away in a controlled manner
- safe for operator and victim
-safe
The Holmatro rim adapter set is an innovative solution for quick and safe creation of space under heavy goods vehicles. Victims often lie near or under the rear axle. When dealing with heavy goods vehicles lifting the chassis to create space below the axle requires lots of lift and often leads to unsafe situations. With the help of the Holmatro rim adapter set the rear wheel is lifted in a stable way into its suspen-sion which creates space.
Features / Benefits
10.3 Assist tools
Rim adapterspecifi cations
article number 150.182.580
weight complete set, incl.case kg 12.4
length tensioning belt m 4
force tensioning belt kN / t 10 / 1
11610.4 Assist tools
Unique auto-lock system
Squeeze and push mechanism
Extremely lightweight Heat resistant cover
Base plate with non-slip profileHigh shoring capacity
- pulls out and locks automatically in one movement - locking holes over the full strut length at very small intervals - enables fi ne length adjustment for accurate positioning of the strut
- to release the strut quickly and easily after use
- easy to carry - easy to work with
- slideable, heat-resistant protection cover around tensioning belt - protects the belt against hot exhausts
- for optimal grip on all surfaces - up to 16 kN shoring load - enough to stabilize any type of car
Features / Benefits
V-Strutspecifi cations
article number 150.062.158
max. axial load kN / t 16 / 1.6
closed length mm 1080
number of stroke steps 24
stroke step size mm 30
total stroke mm 720
extended length mm 1800
weight kg 7.9
dimensions (L x W x H) mm 1080 x 149 x 210
length tensioning belt m 5
V-Strut - accessoriesitem description art. nr.
1 sheet metal knife 150.062.183
2 base support plate 150.011.519
21
Serrated, multi-purpose head
Snap hook
Tensioning belt
- for optimal grip on all types of vehicles
- for fast and easy detachment and reattachment
- tensioning belt with hook and ratchet mechanism - for quick and easy attachment to the car - enables the rapid creation of a stable triangle
Rescue Support Bag art. nr.RSB 1 150.182.155
Consisting of
Item description function
1 tyre defl atorRemoval of tyre valves for pneumatic stabilization.
150.003.213
2 seatbelt cutter Cutting seatbelts. 980.005.022
3 trim removal hookTo remove interior trim e.g. rubber seals and plastic trim.
150.003.210
4 trim removal forkTo remove interior trim e.g. screw covers and plugs.
150.003.209
5 window punch Glass management. 980.005.045
6 fl exible steel ruleTo measure distances from hazards.
590.000.109
7 marker pen
To mark cut points away from hazard areas or for recording other critical information such as patient observations.
150.003.212
8 mini LED torchAllows for extra visibility in dark areas.
980.000.352
9 multi-cutterCutting away interior trim, rubber and fabric.
150.003.211
10bag inclusive waist and thigh straps
For well-organized storage of the tools.
150.003.215
Features / Benefits
11711710.5 Assist tools
Modern vehicles present the rescuer with many challenges. The presence of passive safety
systems such as airbags and seatbelt pre-tensioners, which must be identifi ed and located,
coupled with stronger construction means that modern vehicles are now more diffi cult to
access. In order to perform a safe and timely extrication, you need the right equipment for
the job. Choosing the proper assist tools is just as important as using the correct hydraulic
rescue tools. However, these assist tools are often overlooked and constantly misplaced
at the scene of the rescue.
With the Rescue Support Bag, these helpful tools are there when you need them, in one
place and always ready for use.
-Bag made of high-quality, rugged,
light weight and fl exible material
that is fi re-resistant and water-
repellent.
-Flap with Velcro fastening.
-Flap can be fold down and stays
open because of an extra Velcro
strip on the inside of the fl ap.
-Waist and thigh straps are
adjustable.
-Extra section in front of bag.
118118
-Safe - catches large amounts of glass
fragments and dust
-Quick - cuts glued or laminated windshields
in a very short time
-Silent - hand-operated ratchet mechanism
-Fast -Effective -Versatile
10.6 Assist tools
Glas-Masterspecifi cations Glas-Master
article number 150.182.060
dimensions (L x W x H) mm 420 x 245 x 35
weight, ready for use kg 1.0
The Glas-Master is delivered including a window punch and mounting clips
Glass cutterspecifi cations HGC 7
article number 150.012.410
weight, ready for use kg 1.6
- special woven fi bre cloth • strong – soft – resistant to high temperatures -also covers part of steering column • no gas and parts of steering wheel or column can escape - reduces sound level of airbag activation -easy to install, within seconds - lightweight and compact - suitable for all passenger cars and modern vans
Secunet airbag safety coverspecifi cations Secunet
article number 350.182.005
weight, ready for use gr 250
Secunet is delivered in a synthetic storage box and with a wall-mounting bracket for installation of storage box in rescue vehicle.
Features / Benefits
119119
Safetypenspecifi cations Safetypen
article number 350.182.088
dimensions (L x W x H) mm 113 x 32 x 23
weight ready for use kg 0.065
10.6 Assist tools
- special loop for attachment over coupler • binder remains attached to hose and does not get lost -made of strong durable nylon - for hoses lengths 5, 10 and 15 meter
-ensures optimal safety for the victim • offers protection against sharp edges, glass fragments, slipping tools or ejected parts -made of thick yet fl exible PVC material • durable - strong - fl exible - transparent • enables continuous monitoring of the victim - fi tted with 4 handles • to hold in any required position
-with an eye to store hoses in hanging position • saves space and prevents damage -with Velcro fastening
Hose binderspecifi cations hose binder
article number 150.182.039 150.182.040
number 5 x 20 x
Protection shieldspecifi cations protection shield
article number 150.182.045
dimensions (L x W) mm 900 x 500
weight, ready for use kg 2.9
Features / Benefits
Features / Benefits
Features / Benefits
Smart design
One tool, two functions
Durable punch
Ultra-sharp cutting edge
- Combination of window punch and seat belt cutter
- Easily breaks tempered glass* - With special coating for improved corrosion resistance * Tested on 10 mm thick car windows
- To cut seat belts in a smooth way
- Protects cutting edge to avoid contact with fi ngers
120120
Features / Benefits
Features / Benefits
10.7 Assist tools
- lightweight -wear-resistant, fi re-retardant polyester • longer life span -water-repellent • other materials such as Kevlar® absorb water, become heavy and unmanageable when wet and require long drying time -striking orange colour • dangerous spots are clearly marked -with padded lining • offers extra protection -blankets with powerful magnets • for instant and optimal attachment to the vehicle -covers with Velcro • remain in position under all circumstances - removable magnets • washable
-made of PVC-coated polyester fabric • durable • does not absorb dirt and therefore easy to clean • water-repellent - foldable material • easy to carry • easy to store - striking orange colour • clearly marks the spot where all tools are assembled
Sharp Edge Protection covers
specifi cations SEP 5 SEP 10
article number 150.581.676 150.581.677
description dimensions cm weight kg content content
cover with Velcro 26 x 30 0.18 2 x 4 x
blanket with magnets 60 x 60 0.52 2 x 4 x
blanket with magnets 150 x 60 1.20 1 x 2 x
Tool stationsspecifi cations tool station
article number 150.182.043 150.182.044
dimensions (L x W) cm 200 x 150 250 x 200
weight kg 2.3 3.7
Sharp Edge Protection blanketspecifi cations SEP 2.5 ST
article number 350.182.075
dimensions (L x W x H) mm 2500x1000x5
weight ready for use kg 3.5
Delivered in black polyester bag (weight 1 kg)
12110.7 Assist tools
Ultimate protectionExtreme durable material
- allows to climb over walls, fences or other objects with sharp edges on top such as glass fragments, razor wire of jagged profi le
Features / Benefits
-100% woven polyester with acryl felt inside
Water repellent and fire retardant
- for use in various conditions
Easy cleaning
-with damp cloth or washable (if air-dried properly afterwards)
Accompanying carrying bag
-with adjustable strap for easy carrying on your shoulder or back - for easy storage -can be opened by means of clips or by using its Velcro fastening -upside-down design ensures easy release of the blanket when opening the bag
8
1
2
3
4 5
6
7
9
7
122
Air control sets - in synthetic orange case
300 BAR 200 BAR
model HCS 10 U DCS 10 U HCS 10 U DCS 10 U
art. nr. 350.582.038 350.582.039 350.582.435 350.582.436
item. quantity quantity quantity quantity
1B 1 x 1 x 1 x 1 x
1C 1 x 1 x 1 x 1 x
2 2 x 2 x 2 x 2 x
3 1 x 1 x 1 x 1 x
4 -- 1 x -- 1 x
6A 1 x 1 x -- --
6B -- -- 1 x 1 x
7 1 x -- 1 x --
Accessories lifting bags - high pressure
item description model art. nr.
air hoses in 3 colours and 2 lengths:
1A 5 metre yellow AH 5 YU 350.572.006
1B 5 metre blue AH 5 BU 350.572.007
1C 5 metre red AH 5 RU 350.572.008
1D 10 metre yellow AH 10 YU 350.572.009
1E 10 metre blue AH 10 BU 350.572.011
1F 10 metre red AH 10 RU 350.572.012
2shut-off hose with safety; lifting bag remains under pressure and hose and air source can be used elsewhere
350.582.035
3pressure reducer with 5/8"DIN connection; suitable for both 200 and 300 bar; complete with 2 metre hose
PRV 823 AU 350.182.002
4 double control unit (push buttons), with safety valve set at 8.5 bar DCV 10 U 350.582.034
5 single control unit (push buttons), with safety valve set at 8.5 bar SCV 10 U 350.582.042
6A connection piece for connection of two 300 bar air bottles with 5/8" DIN connection 350.582.430
6B connection piece for connection of two 200 bar air bottles with 5/8" DIN connection 350.582.420
7 synthetic control box for operation of 2 lifting bags, with safety valves set at 8.5 bar HDC 10 AU 350.182.003
8universal adapter set for connection of lifting bags on various air-sources, like theair system of a truck, a compressor or a truck tyre; in synthetic case
UAS 10 350.582.050
9A air bottle 6 litres, 300 bar 350.581.096
9B air bottle 6 litres, 200 bar 350.581.086
Lifting bags - high pressure - 8 bar
model art. nr.
max. effective lifting force
max. infl ation height
dimensions (LxW)
lightrefl ecting
labelsweight
thickness incl.
profi le
aircontent(8 bar)
water content (8 bar)
kN / t mm mm on nr. of corners kg mm litre litre
HLB 1 350.321.003 10 / 1 80 150 x 150 1 0.6 22 6.3 0.7
HLB 3 350.321.004 35 / 3.7 130 228 x 228 1 1.5 22 16.2 1.8
HLB 5 350.321.006 50 / 5.1 150 270 x 270 1 2.0 22 22.5 2.5
HLB 10 350.321.007 100 / 10.2 215 380 x 380 3 3.8 25 76.5 8.5
HLB 12 350.321.008 120 / 12.2 225 408 x 408 3 5.0 25 90 10
HLB 18 350.321.009 180 / 18.3 240 660 x 360 3 6.8 25 171 19
HLB 20 350.321.010 200 / 20.3 290 508 x 508 3 6.7 25 189 21
HLB 24 350.321.012 240 / 24.4 215 1000 x 310 3 9.5 25 216 24
HLB 29 350.321.017 300 / 30.6 348 611 x 611 3 9.8 25 373 41.5
HLB 32 350.321.013 320 / 32.6 380 658 x 658 3 13.0 25 450 50
HLB 40 350.321.014 400 / 40.7 405 714 x 714 3 15.1 25 558 62
HLB 67 350.321.015 670 / 68 520 908 x 908 3 23.5 25 1206 134
11.1 High pressure lifting bags
Tested according to EN 13731.
123123
Features / Benefits
Light reflecting labels on top side
CE-icons With carrying straps (models HLB 40 and HLB 67)
With centring cross on both sides
Non-slip design
Reinforced with 3 aramide inlays Unique lower profile edges
- easy insertion under all circumstances
11.1 High pressure lifting bags
- better visibility in dark environment which improves safety and user friendliness
-optimal safety for the user -easy to carry and easy to install - easy and safe to position
-maximum grip on all surfaces - interlocking when 2 bags are used on top of each other
- light weight - highly fl exible -proven durability
1
2
34
5 6
7
2
1
3
4
5
5
5
5
55
6
124124
Basic lifting bag set, consisting of:item description model art. nr. qty.
1 lifting bag 5 tons HLB 5 350.321.006 1
2 lifting bag 10 tons HLB 10 350.321.007 1
3 double control unit DCV 10 U 350.582.034 1
4 pressure reducer PRV 823 AU 350.182.002 1
5 air hose 5 m. red AH 5 RU 350.572.008 1
6 air hose 5 m. blue AH 5 BU 350.572.007 1
7 air bottle 6 litres, 300 bar 350.581.096 1
Medium lifting bag set, consisting of:item description model art. nr. qty.
1 lifting bag 10 tons HLB 10 350.321.007 1
2 lifting bag 20 tons HLB 20 350.321.010 1
3 lifting bag 32 tons HLB 32 350.321.013 1
4 lifting bag 40 tons HLB 40 350.321.014 1
5 air control set DCS 10 U 350.582.039 1
6 air bottle 6 litres, 300 bar 350.581.096 2
For specifi cation of individual items see page 122.
For specifi cation of individual items see page 122.
11.1 Advisory lifting bag sets
The broad range of Holmatro pneumatic high pressure lifting bags and accessories allows you to select a combination that will match your rescue operations in the best possible way. Alternatively you can choose between a number of advisory sets.
1
2
3
4
5
5
55
5
6
5
125125
Heavy duty lifting bag set, consisting of:item description model art. nr. qty.
1 lifting bag 10 tons HLB 10 350.321.007 2
2 lifting bag 20 tons HLB 20 350.321.010 2
3 lifting bag 40 tons HLB 40 350.321.014 2
4 lifting bag 67 tons HLB 67 350.321.015 2
5 air control set DCS 10 U 350.582.039 2
6 air bottle 6 litres, 300 bar 350.581.096 4
For specifi cation of individual items see page 122.
11.1 Advisory lifting bag sets
126126
Lifting bags - low pressure - sets
model art. nr.
lifting capacity(a pair)
dimensions in storage bag
(L x W)
weight*(LAB set)
heightdefl ated
heightinfl ated
max.workingpressure
air content(a pair)
t mm kg mm mm bar litres
LAB 4 UN 350.512.204 3.6 600 x 600 27.0 60 580 0.5 626
LAB 6 UN 350.512.206 5.8 750 x 750 34.0 60 580 0.5 978
LAB 9 UN 350.512.209 8.2 900 x 900 41.0 60 580 0.5 1410
LAB 16 UN 350.512.216 14.6 1200 x 1200 65.0 60 580 0.5 2506
* LAB set consists of: 2 x LAB, 1 x carrying bag, 2 x AL 5 U, 1 x PRV 823 AU, 1 x LDC 0.5 AU, 1 x LAB repair kit
Lifting bags - low pressure - set components
single lifting bags model art. nr.
LAB 2 350.511.204
LAB 3 350.511.206
LAB 4.5 350.511.209
LAB 8 350.511.216
carrying bags for model art. nr.
LAB 4 UN 350.581.131
LAB 6 UN 350.581.132
LAB 9 UN 350.581.133
LAB 16 UN 350.581.134
air hose model art. nr.
length 5 m AL 5 U 350.572.106
control box model art. nr.
double control box LDC 0.5 AU 350.182.011
pressure reducer model art. nr.
5/8"DIN connectionwith 2 m hose
PRV 823 AU 350.182.002
Lifting bags - low pressure - optional accessories
air hose art. nr.
length 10 m 350.572.110
connection pieces art. nr.
for 2 bottles of 200 bar 350.582.420
for 2 bottles of 300 bar 350.582.430
air bottles art. nr.
6 litres - 200 bar 350.581.086
6 litres - 300 bar 350.581.096
11.2 Low pressure lifting bags
Tested according to EN 13731.
127127
12
3 4
5
6
7
8 9
Tank sealing systemspecifi cations HLS 2
article number 350.582.020
max. working pressure bar 1.5
capacity lifting bag at 1.5 bar t 2
Tank sealing system HLS 2 consists of:item description qty.
1 harness 1
2 sealing plate (465 x 465 mm) 1
3 protective cover orange (for item 8) 1
4 protective cover green (for item 9) 1
5 corner belt with buckle (length 635 mm) 4
6 carrying belt with buckle (length 455 mm) 2
7 shut-off hose, safety valve set at 1.5 bar 1
8 stretch belt with ratchet, orange, length 10 m 1
9 stretch belt with ratchet, green, length 10 m 2
Features / Benefits
11.3 Tank sealing
Lifting bag HLB 10 to be ordered seperately - see page 122.
Unique construction
- fl exible -high chemical resistance -quick and safe to install
128128
1
6
3
334
2
5
Leak sealing systemspecifi cations HVSP 250 U Vacuum leak sealing system HVSP 250 U consists of:
article number 360.302.011 1. vacuum sealing plate2. stainless steel pressure gauge with protection cap3. vacuum pump with air hoses length 3 m4. drain cock with drain hose, length 3 m5. tube gel for optimal sealing, art. nr. 360.581.1306. steel storage cage (L x W x H) 620 x 430 x 200 mm
Delivered completely mounted and ready for use.
max. working pressure bar 6
dimensions sealing pad (L x W) mm 600 x 390
thickness pad mm 35
dim. sealing compartment (L x W) mm 250 x 50
length draining hose m 3
air consumption (at 6 bar) l / min 300
weighth ready for use kg 5.3
11.4 Leak sealing
Features / Benefits
sealing compartment
Rapid leak sealing
- reduces risks of fi re or explosions -prevents or limits environmental damage
Emergency drainage system
- after sealing fl uid can be stored in other container
Special rubber compound
- high chemical resistance
Stainless steel pressure gauge
- no rust
12912912 PowerShore
130
Holmatro PowerShore is a versatile and easy to assemble emergency shoring system providing quick and reliable stabilization for every rescue situation. No matter what kind of operation your are faced with- light vehicle rescue- heavy vehicle rescue- trench rescue- collapsed structure rescue (USAR) this system meets any shoring requirement.
Consisting of various lightweight, fully compatible components with snap-lock connection Holmatro PowerShore can be assembled in seconds. With the help of many different extension lengths and accessories virtually any object can be shored at various angles. The load is safely secured by means of a manual or automatic locking system. Holmatro PowerShore is also available with integrated pneumatic or, for even more power, hydraulic lifting cylinders. This allows for a combination of shoring and lifting operations is situations where potentially life saving ‘working space’ needs to be created.
Strut operating systems all struts with max. load capacity 100 kN/ 10.2 t, depending on the shore length
1. manual (mechanical) – strut is extended manually; no lifting
capacity
2. pneumatic – strut is operated by means of an 8 bar pneumatic
system, consisting of an air bottle, pressure reducer, control unit and
air hoses; lifting capacity 4 kN / 0.4 t
3. hydraulic – strut is operated by means of a 720 bar hydraulic hand
pump with hose and pressure gauge; lifting capacity 100 kN / 10.2 t
Strut locking systems:1. locknut locking system – secured manually.
2. auto-lock locking system – secured automatically. Allows for remote shoring: a shore is positioned in an unsafe area and then extended from a remote, safe location by either hydraulic or pneumatic pressure.
Available combinationsCombining the three operating and two locking systems results in fi ve different strut types:
Manual (mechanical) Pneumatic (air) Hydraulic (oil)
Locknut Manual Locknut strut Pneumatic Locknut strut Hydraulic Locknut strut
Auto-lock -- Pneumatic Auto-lock strut Hydraulic Auto-lock strut
12.1 PowerShore - introduction
One system for every rescue situation
One system for shoring and lifting
HS 1 Q 5 FLHS 1 L 5+AS 3 Q 5 FL AS 3 L5+
MS 2 L 2+MS 2 L 5+
AS 3 Q 5 FL
SX 1
FX 1
SX 2
SX 5
SX 10
AS 3 L5+ HS 1 Q 5 FL
131
MS 2 L 2+
PowerShore - struts with hydraulic cylinder
model art. nr. locking system
retracted length mm
stroke mm
weight kg
working pressure bar/MPa
force at working
pressure kN/t
oil content at max. stroke
cc
HS 1 Q 5 FL 150.011.547 Auto-lock 632 252 10.3 720 / 72 100 / 10.2 346
HS 1 Q 10 FL 150.011.536 Auto-lock 1092 252 13.0 720 / 72 100 / 10.2 346
HS 1 L 5 + 150.011.543 Locknut 575 252 9.2 720 / 72 100 / 10.2 346
HS 1 L10 + 150.011.537 Locknut 1035 252 11.9 720 / 72 100 / 10.2 346
PowerShore - struts with pneumatic cylinder
model art. nr. locking systhem
retracted length mm
stroke mm
weight kg
working pressure bar/MPa
force at working
pressure kN/t
max. air/wa-ter content
litres
AS 3 Q 5 FL 150.011.546 Auto-lock 632 252 8.4 8 4 / 0.4 20.4 / 2.3
AS 3 Q 10 FL 150.011.545 Auto-lock 1092 252 11.2 8 4 / 0.4 20.4 / 2.3
AS 3 L 5+ 150.011.532 Locknut 575 252 7.3 8 4 / 0.4 20.4 / 2.3
AS 3 L 10+ 150.011.531 Locknut 1035 252 10.1 8 4 / 0.4 20.4 / 2.3
Auto-lock with integrated spacer: plunger with automatic locking mechanism that locks in steps of 9 mm. Retracting the plunger is only possible after releasing the locking mechanism. The integrated spacer, a spring operated fl ex mechanism with 13 mm stroke, is used to overcome one 9 mm step of the Auto-lock system and creates a max. pretension in the strut of 4.0 kN / 0.4 t.
Locknut: plunger with thread and Locknut. When the plunger is extended the Locknut can be secured. The pressure can then be released. Axial displacement per rotation is 16.5 mm.
All struts are equipped with a female snap-lock system on both sides. Cylinders are single acting with spring return. All struts can be used with all extensions and heads.
PowerShore - mechanical struts
model art. nr. locking system
retractedlength mm
strokemm
weightkg
MS 2 L 2+ 150.011.538 thread 250 127 3.5
MS 2 L 5+ 150.011.533 Locknut 575 250 6.7
PowerShore - extension pipes / connector
model art. nr. extension mm
colourcode
weight kg
outsideØ mm
working load kN/t*
SX 1 150.011.501 125 white 1.5 90 100 / 10.1
SX 2 150.011.502 250 blue 1.9 90 100 / 10.1
SX 5 150.011.503 500 yellow 2.8 90 100 / 10.1
SX 10 150.011.504 1000 green 4.6 90 100 / 10.1
SX 15 150.011.506 1500 red 6.4 90 100 / 10.1
FX 1 150.011.505 -- -- 1.4 89 100 / 10.1
Thread: plunger with thread. When the plunger is extended the thread is self-retaining. Axial displacement per rotation is 16.5 mm.Locknut: plunger with thread and Locknut. When the plunger is extended the Locknut can be secured. Axial displacement per rotation is 16.5 mm.
Extension pipes: with male snap-lock system on one side and female snap-lock system on the other side.Connector FX1: with female snap-lock system on both sides. To connect the male end of an extension with one of the heads. In this way it is possible to make a fi xed shore that cannot be extended.
* depending on total length - see user manual
12.2 PowerShore - products
1 2
3
5
4
1
132132
Accessories - all accessories to be used on struts and extension pipes are equiped with a male snap lock system
description art. nr. description art. nr.
Flat head - aluminium. For support against a fl at surface; 0.3 kg, ø 89 mm. 150.011.509 Pointed head. For use in e.g. narrow gaps;
1.2 kg, ø 89 mm. 150.011.524
Flat head with nailing plate - aluminium. For support against a fl at surface; with nailing holes; 0.8 kg, 150 x 150 mm.
150.011.541Base support plate. Can support 3 swivel heads and is suitable for the use of up to 3 tensioning belts to create a stable triangle; 4.0 kg.
150.011.519
Tilting head - aluminium. For support on uneven or tilting surfaces. Max. angle 45o in all directions; 1.7 kg, 95 x 95 mm.
150.182.038
Trench support plate - zinc plated steel. Can be nailed to wooden plates to support 2 swivel heads in e.g. a trench; 0.9 kg, 280 x 110 x 75 mm.
150.011.549
Tilting head with nailing plate - aluminium. For support on uneven or tilting surfaces; with nailing holes. Max. angle 45o in all directions; 2.5 kg, 150 x 150 mm.
150.182.048 Tensioning belt. Length 4.0 m, width 35 mm, weight 1.4 kg, load 10 kN / 1.1 t.. 390.511.073
Beam support head. For use with beams up to 150 mm; with nailing holes; 1.7 kg. 150.011.513 Adjustable hook wrench. To create a pre-load
with the MS 2 L 2+. Two pieces are advised. 150.581.689
Beam support head. For use with beams up to 100 mm; with nailing holes; 1.2 kg. 150.011.514 Rope with carbine hook. To lower struts, e.g. into
a trench. 150.011.548
L-support head. For use with wide beams; with nailing holes; 1.0 kg. 150.011.520
Rubber anti-roll block. Prevents struts and extensions from rolling on uneven surfaces and protects against dirt and damage.
150.113.057
Swivel head - aluminium. Can be placed in almost any position and against each other for mutual support; 2.0 kg.
150.182.046 Storage / carrying bag for accessories. 150.011.005
V-block head small - aluminium. For support of pipes; 0.7 kg, ø 89 mm. 150.011.516 Storage / carrying bag for struts and extensions. 150.011.006
V-block head large - aluminium. For support of pipes; 1.7 kg. Opening x width 141 x 100 mm.
150.011.522 2-way block. To support 2 tilting heads. 150.062.074
Cone head. For support on concrete or steel surfaces; 0.5 kg, ø 89 mm. 150.011.517
3-way swivel head. Contains 3 integrated swivel heads for use with up to 3 shoring lines in various directions.
150.062.075
Cross head. For use on many kinds of surfaces; 1.1 kg. 150.011.523
Accessories - to be used in combination with struts with hydraulic cylinder
item description model art. nr.
1hand pump, oil content 700 cc, weight ready for use 9.9 kg, presssure gauge 0-720 bar, rubber protection cover for pressure gauge, hose 3 metres with quick-coupler
HTW 700 APS 150.012.504
Accessories - to be used in combination with struts with pneumatic cylinder
item description model art. nr.
1 single control unit with safety valve SCV 10 U 350.582.042
2 double control unit with safety valve DCV 10 U 350.582.034
3 air bottle 6 litres, 300 bar - 350.581.096
4 pressure reducer with hose of 2 metres, suitable for both 200 and 300 bar PRV 823 AU 350.182.002
5
air hose 5 metres, colour yellow AH 5 YU 350.572.006
air hose 5 metres, colour blue AH 5 BU 350.572.007
air hose 10 metres, colour yellow AH 10 YU 350.572.009
air hose 10 metres, colour blue AH 10 BU 350.572.011
12.2 PowerShore - products
133
Features / Benefits
Versatile
Lightweight
-easy to carry -easy to assemble and very quick to position
- the PowerShore system includes hydraulic, pneumatic and manual struts, to deal with every rescue situation, enabling both shoring and lifting
Snap-lock system
10 tons hydraulic strut
Numerous fields of application
Reflective colour coding of extension pipes
- all items can be connected within seconds
-avoids miscommunication -easy to spot, especially in the dark
- shoring at various angles possibles
Hydraulic strut
Pneumatic strut
Manual strut
- vehicle extrication - industrial accidents - urban search and rescue - trench rescue - naval damage control
12.3 PowerShore - features / benefits
134
Powerful Fast
Safe
Smooth edges
-100 kN / 10.1 t max. load capacity, depending on the shore length -100 kN / 10.1 t max. lifting capacity with integrated hydraulic lifting modules
- load is secured by manual “Locknut” or automatic locking “Auto-lock” system -auto-lock pneumatic or hydraulic systems enable ‘remote shoring’, i.e. when a shore is positioned in an unsafe area and then extended from a remote safe location by either pneumatic or hydraulic pressure
-male-female snap-lock (dis)connection system for extremely fast coupling and uncoupling
-no protruding parts - smooth edges will not catch your clothes
Features / Benefits
-fully compatible components ensure quick assembly
- refl ecting colour codes enable quick length as-sessment, even in the dark
12.3 PowerShore - features / benefits
1
2
3
2
45
6
7 8
910
11
1213
14
15
135
Application examples The following examples are some of the applications that can be achieved with these sets. For a more detailed description of all possible applications, please contact your local Holmatro sales representative.
Vehicle extrication rescue - stabilization of vehicle on its side (see picture below table) - stabilization of vehicle on its roof - stabilization in ‘light vehicle under heavy vehicle’ scenarios
Collapsed structure rescue (USAR) - creation of safe areas using single spot shores (see picture below) -creation of door or window shores - follow-up shoring of lifted loads
Trench collapse rescue - creation of safe working zones in shallow trenches
PSM 1basic mechanical shoring set
set art. nr.: 150.062.097
PSM 2advanced mechanical shoring set
set art. nr.: 150.062.098
Stabilization of a vehicle on its side. Spot shore used to protect an exit route.
item art. nr. description PSM 1* PSM 2*
1 150.011.538 MS 2 L 2+ (manual Locknut strut)) 1 2
2 150.011.501 SX 1 (extension 125 mm) 1 2
3 150.011.502 SX 2 (extension 250 mm) 1 2
4 150.011.503 SX 5 (extension 500 mm) 1 2
5 150.011.504 SX 10 (extension 1000 mm) 1 2
6 150.011.523 cross head 1 2
7 150.182.038 tilting head 1 2
8 150.011.516 V-block head small - 2
9 150.011.520 L-support head 1 2
10 390.511.073 tensioning belt 2 4
11 150.581.689 hook wrench 2 2
12 150.011.519 base support plate 1 2
accessories (optional, not included in the sets)
13 150.011.006 storage bag struts & extensions 1 1
14 150.011.005 storage bag accessories - 1
15 150.113.057 anti-roll block 7 14
* the numbers listed in these columns represent the number of components as included in the set
For specifi cation of individual items see pages 131 and 132.
Mechanical shoring sets
12.4 PowerShore - set examples
1 23
45
6
7
8
9
1011
12
13
14
15
16
17
18 1920
212223
24
25
26
27
28
136
item art. nr. description PSH 1* PSH 2* PSH 3*
1 150.011.538 MS 2 L 2+ (manual Locknut strut) - 2 2
2 150.011.543 HS 1 L 5+ (hydraulic Locknut strut) 2 2 2
3 150.011.547 HS 1 Q 5 FL (hydraulic Auto-lock strut) - - 2
4 150.012.504 HTW 700 APS (hand pump) 2 2 4
5 150.011.501 SX 1 (extension 125 mm) 2 2 4
6 150.011.502 SX 2 (extension 250 mm) 2 2 4
7 150.011.503 SX 5 (extension 500 mm) 2 2 4
8 150.011.504 SX 10 (extension 1000 mm) 2 2 4
9 150.011.505 FX 1 (double female connector) - - 2
10 150.062.074 2-way block - 1 1
11 150.011.519 base support plate 2 4 4
12 150.062.075 3-way swivel head - - 1
13 150.011.523 cross head 2 2 4
14 150.182.046 swivel head 2 2 4
15 150.182.038 tilting head 2 2 4
16 150.011.522 V-block head large - - 2
17 150.011.516 V-block head small 2 2 2
18 150.011.524 pointed head - - 2
19 150.011.509 fl at head - 2 2
20 390.511.073 tensioning belt 4 6 6
21 150.011.548 rope - - 2
22 150.581.689 hook wrench - 2 2
23 150.011.520 L-support head 2 2 2
24 150.011.514 beam support head 100 mm - 2 2
25 150.011.513 beam support head 150 mm - - 1
accessories (optional, not included in the sets)
26 150.011.006 storage bag struts & extensions 1 1 2
27 150.011.005 storage bag accessories 1 1 2
28 150.113.057 anti-roll block 14 16 32
* the numbers listed in these columns represent the number of components as included in the set
For specifi cation of individual items see pages 131 and 132.
PSH 1basic hydraulic shoring set
set art. nr.: 150.062.099
PSH 2advanced hydraulic shoring set
set art. nr.: 150.062.100
PSH 3heavy duty hydraulic shoring set
set art. nr.: 150.062.101
Application examples The following examples are some of the applications that can be achieved with these sets. For a more detailed description of all possible applications please contact your local Holmatro sales representative.
Vehicle extrication rescue - stabilization of vehicle on its side - stabilization of vehicle on its roof - stabilization in ‘light vehicle under heavy vehicle’ scenarios -controlled lifting of vehicles - stabilization of heavy goods vehicles
Collapsed structure rescue (USAR) - creation of safe areas using single spot shores -creation of door or window shores - follow-up shoring of lifted loads -combined shoring / lifting operations
Trench collapse rescue - creation of safe working zones in trenches using remote shoring
Hydraulic shoring sets
12.4 PowerShore - set examples
12 3
4
5
6
7
8
9
10
11 12
13 14
15
16
17 1819
2021
22
2324
25
26
2728
29 30
3132
33
137
Application examples The following examples are some of the applications that can be achieved with these sets. For a more detailed description of all possible applications please contact your local Holmatro sales representative.
Vehicle extrication rescue - stabilization of vehicle on its side - stabilization of vehicle on its roof - stabilization in ‘light vehicle under heavy vehicle’ scenarios - stabilization of heavy goods vehicles
Collapsed structure rescue (USAR) - creation of safe areas using single spot shores -creation of door or window shores - follow-up shoring of lifted loads
Trench collapse rescue - creation of safe working zones in trenches using remote shoring
PSP 1basic pneumatic shoring set
set art. nr.: 150.062.102
PSP 2advanced pneumatic shoring set
set art. nr.: 150.062.103
item art. nr. description PSP 1* PSP 2*
1 150.011.538 MS 2 L 2+ (manual Locknut strut) 2 2
2 150.011.546 AS 3 Q 5 FL (pneumatic Auto-lock strut) 2 2
3 150.011.532 AS 3 L 5+ (pneumatic Locknut strut) - 2
4 150.011.501 SX 1 (extension 125 mm) 2 4
5 150.011.502 SX 2 (extension 250 mm) 2 4
6 150.011.503 SX 5 (extension 500 mm) 2 4
7 150.011.504 SX 10 (extension 1000 mm) 2 4
8 150.011.505 FX 1 (double female connector) - 2
9 150.062.074 2-way block 1 1
10 150.062.075 3-way swivel head - 1
11 150.011.519 base support plate 2 4
12 150.011.523 cross head 2 4
13 150.182.046 swivel head 2 2
14 150.182.038 tilting head 2 4
15 150.011.522 V-block head large - 2
16 150.011.516 V-block head small 2 2
17 150.011.524 pointed head - 2
18 150.011.509 fl at head - 2
19 390.511.073 tensioning belt 4 6
20 150.581.689 hook wrench 2 2
21 150.011.520 L-support head 2 2
22 150.011.514 beam support head 100 mm - 2
23 150.011.513 beam support head 150 mm - 1
24 350.182.002 PRV 823 AU (pressure reducer) 1 2
25 350.582.034 DCV 10 U (double control unit) 1 2
26 350.572.011 AH 10 BU (air hose) 1 1
27 350.572.009 AH 10 YU (air hose) - 1
28 350.572.007 AH 5 BU (air hose) - 1
29 350.572.006 AH 5 YU (air hose) 1 1
accessories (optional, not included in the sets)
30 350.581.096 air bottle, 6 litres, 300 bar 1 2
31 150.113.057 anti-roll block 16 32
32 150.011.006 storage bag struts & extensions 1 2
33 150.011.005 storage bag accessories 1 2
* the numbers listed in these columns represent the number of components as included in the set
For specifi cation of individual items see pages 131 and 132.
Pneumatic shoring sets
12.4 PowerShore - set examples
12
3
4
5 6
7
8
9
10
11
12
13
14 15 16
1718 19
20
2122
23 24
25
26
27
28
29
30 31 32
33
3435
36
37
38
3940
138
Application examples The following examples are some of the applications that can be achieved with these sets. For a more detailed description of all possible applications please contact your local Holmatro sales representative.
Vehicle extrication rescue - stabilization of vehicle on its side - stabilization of vehicle on its roof - stabilization in ‘light vehicle under heavy vehicle’ scenarios -controlled lifting of vehicles - stabilization of heavy goods vehicles
Collapsed structure rescue (USAR) - creation of safe areas using single spot shores -creation of door or window shores - follow-up shoring of lifted loads -combined shoring / lifting operations
Trench collapse rescue - creation of safe working zones in trenches using remote shoring
PSX 1basic combined shoring set
set art. nr.: 150.062.104
PSX 2advanced combined shoring set
set art. nr.: 150.062.105
PSX 3heavy duty combined shoring set
set art. nr.: 150.062.106
* the numbers listed in these columns represent the number of components as included in the setFor specifi cation of individual items see pages 131 and 132.
item art. nr. description PSX 1* PSX 2* PSX 3*1 150.011.538 MS 2 L 2+ (manual Locknut strut) 2 4 8
2 150.011.543 HS 1 L 5+ (hydraulic Locknut strut) 2 2 4
3 150.011.547 HS 1 Q 5 FL (hydraulic Auto-lock strut) - 2 2
4 150.012.504 HTW 700 APS (hand pump)) 2 4 4
5 150.011.546 AS 3 Q 5 FL (pneumatic Auto-lock strut) 2 2 4
6 150.011.532 AS 3 L 5+ (pneumatic Locknut strut) - 2 2
7 150.011.501 SX 1 (extension 125 mm) 4 8 16
8 150.011.502 SX 2 (extension 250 mm) 4 8 16
9 150.011.503 SX 5 (extension 500 mm) 4 8 16
10 150.011.504 SX 10 (extension 1000 mm) 4 8 16
11 150.011.505 FX 1 (double female connector) 2 4 4
12 150.062.074 2-way block 1 2 3
13 150.062.075 3-way swivel head 1 2 2
14 150.011.519 base support plate 4 6 8
15 150.011.523 cross head 4 4 6
16 150.011.516 V-block head small 2 2 4
17 150.182.048 tilting head with nailing plate 2 2 4
18 150.182.046 swivel head 4 4 8
19 150.182.038 tilting head 4 8 12
20 150.011.522 V-block head large 2 2 4
21 150.011.524 pointed head 2 2 2
22 150.011.517 cone head 2 2 4
23 150.011.509 fl at head 2 2 4
24 150.581.689 hook wrench 2 4 8
25 390.511.073 tensioning belt 6 8 12
26 150.011.548 rope 2 4 8
27 150.011.541 fl at head with nailing plate 2 4 6
28 150.011.520 L-support head 2 6 8
29 150.011.514 beam support head 100 mm 2 2 4
30 150.011.513 beam support head 150 mm 2 2 4
31 350.182.002 PRV 823 AU (pressure reducer) 1 2 2
32 350.582.034 DCV 10 U (double control unit) 1 2 2
33 350.572.011 AH 10 BU (air hose) 1 1 1
34 350.572.009 AH 10 YU (air hose) - 1 1
35 350.572.007 AH 5 BU (air hose) - 1 1
36 350.572.006 AH 5 YU (air hose) 1 1 1
accessories (optional, not included in the sets)
37 350.581.096 air bottle, 6 litres, 300 bar 1 2 2
38 150.113.057 anti-roll block 32 64 120
39 150.011.006 storage bag struts & extensions 2 3 6
40 150.011.005 storage bag accessories 2 3 6
12.4 PowerShore - set examples
Combined shoring sets
12
34
5
6
7 89 10
11
12
1314
15
16
17
18
19
20
21
22
139
Remote shoring of a trench. Trench shoring with pneumatic Auto-lock struts.
item art. nr. description PST 1* PST 2*
1 150.011.538 MS 2 L 2+ (manual Locknut strut) 2 4
2 150.011.546 AS 3 Q 5 FL (pneumatic Auto-lock strut) 2 4
3 150.011.501 SX 1 (extension 125 mm) 4 8
4 150.011.502 SX 2 (extension 250 mm) 4 8
5 150.011.503 SX 5 (extension 500 mm) 4 8
6 150.011.504 SX 10 (extension 1000 mm) 2 4
7 150.182.038 tilting head 8 16
8 150.062.074 2-way block 2 4
9 150.581.689 hook wrench 2 4
10 150.011.549 trench support plate 1 2
11 150.011.522 V-block head large - 2
12 150.011.548 rope 4 8
13 350.572.006 AH 5 YU (air hose) - 1
14 350.572.007 AH 5 BU (air hose) - 1
15 350.572.009 AH 10 YU (air hose) 1 1
16 350.572.011 AH 10 BU (air hose) 1 1
17 350.182.002 PRV 823 AU (pressure reducer) 1 2
18 350.582.034 DCV 10 U (double control unit) 1 2
accessories (optional, not included in the sets)
19 350.581.096 air bottle, 6 litres, 300 bar 1 2
20 150.011.006 storage bag struts & extensions 1 2
21 150.011.005 storage bag accessories 1 2
22 150.113.057 anti-roll block 24 48
Application examples The following examples can be achieved with these sets. For a more detailed description of all possible applications please contact your local Holmatro sales representative.
Trench collapse rescue - creation of safe working zones in trenches using remote shoring - stabilization of unsecured installations (pipes etc.) in collapsed trenches
PST 1basic trench shoring set
set art. nr.: 150.062.107
PST 2advanced trench shoring set
set art. nr.: 150.062.108
* the numbers listed in these columns represent the number of components as included in the set
For specifi cation of individual items see pages 131 and 132.
12.4 PowerShore - set examples
Trench shoring sets
12
3
6
8 97
4
5
1 2 3
4 5 6
140140
Oil / greaseitem art.nr. description
1 150.581.095 tefl on lubricating oil, sprayer, for greasing blades daily
2 150.581.093 graphite spray, sprayer, for greasing parts in general
3 150.581.094 Molycote, grease
4 100.581.051 Holmatro hydraulic oil, 1 litre
5 100.581.055 Holmatro hydraulic oil, 5 litres
6 150.581.103 Holmatro motor oil, 0.6 litre
7 150.581.083 copper grease for maintenance of moving parts
8 150.581.413 white grease, for greasing parts of control handle
9 150.581.412 copper grease, to mount steel bolts in aluminium parts
Testing equipmentitem art.nr. description
1 150.000.660 plug-in type pressure gauge set, CORE
2 150.582.410 plug-in type pressure gauge set, dual hoses
3 150.000.815 digital test set PFM 1 C, to check pressure and fl ow, CORE
4 150.152.312digital test set PFM 1, to check pressure and fl ow, dual hoses
5 150.182.514test frame HTF 80, for spreaders and combi tools,0 – 100 kN / 0 - 22000 LBS
6 150.182.069 rpm counter, with cable, for counting rpm’s of engine
-- 150.582.547 set of spray cans for hair crack investigation
13.1 Service
To be assured of optimum tool functioning, regular maintenance is highly recommended.All our dealers are factory trained at Holmatro in giving full technical service to your rescue tools. For your own Holmatro rescue tools inspection and maintenance a variety of products is available.
Upgrading existing tools with LED lights
Handles with 4 integrated LED lights for your existing 3000-series cutters, sprea-ders and combi tools.art. nr. for cutter for combi tool for spreader
150.014.232 CU 3031 - 3035 CT 3150 --
150.014.233 CU 3040 - 3050 -- --
150.014.230 -- -- SP 3230 - 3240
150.014.231 -- -- SP 3260 - 3280
150.014.229 BCU 3010 BCT 3120 --
141141
Sets of 2 blades for cutters and combi tools3000-series 4000 series
art.nr. for cutter model art.nr. for cutter model
150.113.165 3005 150.113.165 4005
150.014.019 4006
150.113.156 3010* 150.113.156 4010*
150.013.386 3020 150.013.550 4020
150.113.177 3030 150.013.551 4030
150.113.212 3031 150.000.849 4031
150.113.172 3035 GP 150.000.882 4035 GP
150.113.186 3035 NCT 150.000.883 4035 NCT
150.113.182 3040 GP 150.113.182 4040 GP
150.113.221 3040 NCT
150.013.440 3050 NCT 150.013.440 4050 NCT
150.013.553 4055 NCT
art.nr. for combi tool model art.nr. for combi tool model
150.113.167 3110
150.113.153 3120* 150.113.153 4120*
150.113.169 3150 150.013.642 4150
* also for battery driven and hand-operated cutters and combi tools
13.1 Service
Any Holmatro traditional dual hose system can easily be converted to a Holmatro CORE Technology system. This conversion takes no more than a couple of minutes.
Traditional dual hose Conversion in a couple of minutes CORETM Technology
Your local dealer can help you with tool conversions.
Converting a traditional dual hose system to a CORE system
Visit our website for up-to-date product information, the latest news, an overview of our innovations, videos, training materials and much more.
www.holmatro.com
Holmatro.com
Follow us on Facebook and discover a world full of pictures, videos, rescue tools and techniques, discussions and exciting contests, all related to your challenging job of saving lives. Join our worldwide family of fi refi ghters and rescuers and engage with them on our page.
www.facebook.com/HolmatroRescueWorld
Holmatro Rescue World
Read all about the latest rescue techniques, new car technology, extrication planning & training, medical considerations and other important focus points during various rescue operations on the weblog of our Holmatro Rescue Consultant.
blog.holmatro.com
Holmatro Rescue Blog
14214214.1 Holmatro Online
2Contents
Page INTRODUCTION
5 About Holmatro
6 About Holmatro Rescue Equipment
7 - 11 Holmatro users worldwide
12 - 13 Quality in everything we do
14 - 16 The power of innovation
17 Reliability
18 - 19 Facilities
20 - 21 Training and training materials
22 - 25 CORE Technology
26 - 27 Features / Benefi ts
28 - 31 NCT - New Car Technology
1. CUTTERS
32 - 33 1.1 Cutters NCT II
34 - 39 1.2 Cutters GP
2. SPREADERS
40 - 43 2.1 Spreaders
3. COMBI TOOLS
44 - 45 3.1 Combi tools / sets 4000 series
46 - 47 3.2 Combi tools 5000 series
4. RAMS
48 - 49 4.1 Rams - 10 tons - single plunger
50 - 51 4.2 Rams - 16 tons - single plunger
52 - 53 4.3 Rams - 16 tons - double plunger
54 - 55 4.4 Rams - 16 tons - accessories
56 - 57 4.5 Rams - telescopic plunger
58 - 59 4.6 Rams - Extendo
5. PUMPS
60 - 61 5.1 Motor pumps - Battery driven Greenline
62 - 63 5.2 Motor pumps - Personal Power
64 - 65 Motor pumps - Personal Power - Duo
66 5.3 Quick Fix & Release Brackets
67 5.4 Motor pumps - Spider Range - SR 10-series
68 - 69 5.5 Motor pumps - Spider Range - SR 20-series
70 - 71 5.6 Motor pumps - Spider Range - SR 30-series
72 - 73 5.7 Motor pumps - Spider Range - SR 40-series
74 5.8 Motor pumps - Diesel / Air driven
75 5.9 Motor pumps - DPU 60-series - Duo
76 5.10 Motor pumps - MPU 60-series - Trio
77 5.11 Hand pumps - 3-stage
78 - 79 Hand/foot pumps - 2-stage
2143
Important safety notice This catalogue contains information on rescue tools and rescue techniques that can be employed in different rescue operations. The situations shown in this catalogue are examples only and merely meant to assist the user of this catalogue in understanding certain basic rescue techniques and rescue tools available.
Holmatro disclaims any liability for any damage or injury, whether direct, indirect or otherwise, and whether asserted in contract, tort, warranty or otherwise, incurred as a result of the use of rescue techniques and/or rescue tools described in this catalogue or the use of any other rescue techniques and/or rescue tools that are employed in any training or emergency situation, except to the extent, and limited to, the terms of any warranty provided by Holmatro for its own equipment. Holmatro makes no warranty, expressed or implied, with respect to its own equipment from the contents of this catalogue, including without limitation, any warranty of merchantability or warranty of fi tness for a particular purpose.
DisclaimerWhile the greatest care has been devoted to the content, it is possible that the information in this printed matter is incorrect or incomplete. N.V. Holmatro and its affi liated companies (hereafter: Holmatro) cannot be held liable in any way for the consequences of activities undertaken on the basis of this printed matter. If you have any doubts about the correctness or completeness of the information, you shall contact Holmatro (phone number: +31 (0)162-589200).
Nothing from this printed matter can be copied and/or made public in any way without the explicit authorisation of Holmatro.
-
www.holmatro.com
Holmatro USAGlen Burnie, MD, U.S.A.Manufacturing, sales & service
Holmatro NetherlandsRescue equipmentRaamsdonksveer, The NetherlandsT +31 (0)162 58 92 00E [email protected], sales & service
Holmatro GroupWorld HeadquartersRaamsdonksveer, The Netherlands
Holmatro UKNottingham, UKSales & service
Holmatro ChinaSuzhou, Jiangsu Province, ChinaSales & service
Holmatro PolandWarsaw, PolandSales & service
Holmatro Poland
HolmatroCatalogue
©Holmatro 0614.06 980.000.160
Resc
ue equipm
entH
olm
atro
Catalogue