Embed Size (px)
Citation preview
ICS 19.100
Zerstörungsfreie Prüfung – Ultraschallprüfung –Teil 2: Empfindlichkeits- und Entfernungsjustierung
European Standard EN 583-2 : 2001 has the status of a DIN Standard.
A comma is used as the decimal marker.
National forewordThis standard has been prepared by CEN/TC 138 ‘Non-destructive testing’.The responsible German body involved in its preparation was the Normenausschuss Materialprüfung(Materials Testing Standards Committee), Technical Committee Ultraschallprüfung.
AmendmentsDIN 54127-1, January 1989 edition, has been superseded by the specifications of EN 583-2.
Previous editionDIN 54127-1: 1989-01.
Ref. No. DIN EN 583-2 : 2001-04English price group 14 Sales No. 1114
08.01
DEUTSCHE NORM April 2001
EN 583-2{
Continued overleaf.EN comprises 44 pages.
© No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut für Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).
Non-destructive testing
Ultrasonic examinationPart 2: Sensitivity and range setting
English version of DIN EN 583-2
Supersedes DIN 54127-1,January 1989 edition.
English version
ICS 19.100
Descriptors:
Non-destructive testing
Ultrasonic examinationPart 2: Sensitivity and range setting
© 2001. CEN – All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.
Ref. No. EN 583-2 : 2001 E
Zerstörungsfreie Prüfung –Ultraschallprüfung –Teil 2: Empfindlichkeits- undEntfernungsjustierung
This European Standard was approved by CEN on 2001-01-05.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland,and the United Kingdom.
EN 583-2
January 2001
Management Centre: rue de Stassart 36, B-1050 Brussels
European Committee for StandardizationComité Européen de NormalisationEuropäisches Komitee für Normung
|ÈÉË
Essais non destructifs – Contrôleultrasonore – Partie 2: Réglage de lasensibilité et de la base de temps
Page 2EN 583-2 : 2001
Page 3EN 583-2 : 2001
Page 4EN 583-2 : 2001
Page 5EN 583-2 : 2001
Page 6EN 583-2 : 2001
Page 7EN 583-2 : 2001
Page 8EN 583-2 : 2001
Page 9EN 583-2 : 2001
Page 10EN 583-2 : 2001
Page 11EN 583-2 : 2001
Page 12EN 583-2 : 2001
Page 13EN 583-2 : 2001
Page 14EN 583-2 : 2001
Page 15EN 583-2 : 2001
Page 16EN 583-2 : 2001
Page 17EN 583-2 : 2001
Page 18EN 583-2 : 2001
Page 19EN 583-2 : 2001
Page 20EN 583-2 : 2001
Page 21EN 583-2 : 2001
Page 22EN 583-2 : 2001
Page 23EN 583-2 : 2001
Key
A Normalized distanceV Gain in dBG Normalized reflector size
Key
s Reflector distanceV Gain in dBDf Reflector diameter
Page 24EN 583-2 : 2001
Page 25EN 583-2 : 2001
Key
1 Calibration height2 Reference height3 Reference line
Page 26EN 583-2 : 2001
Page 27EN 583-2 : 2001
Page 28EN 583-2 : 2001
Page 29EN 583-2 : 2001
Key
1 Curve for test object2 Curve for reference block3 Gain setting for 80 % FSH4 Sound path length
Page 30EN 583-2 : 2001
Page 31EN 583-2 : 2001
Page 32EN 583-2 : 2001
Page 33EN 583-2 : 2001
Page 34EN 583-2 : 2001
Page 35EN 583-2 : 2001
Page 36EN 583-2 : 2001
Page 37EN 583-2 : 2001
Page 38EN 583-2 : 2001
Page 39EN 583-2 : 2001
Page 40EN 583-2 : 2001
Page 41EN 583-2 : 2001
Page 42EN 583-2 : 2001
Page 43EN 583-2 : 2001
Key
y Contact transfer loss Vct in dBx Sound path distance in multiples of t1
Page 44EN 583-2 : 2001
![Ultraschallprüfsysteme 2 - Ingenieur-Buch.de · 2014. 12. 18. · Ein Ultraschallprüfkopf muss nach DIN EN 583-1 die Anforderungen der DIN EN 12668-2 erfüllen [2.7]. Die Prüfkopfauswahl](https://img.pdfslide.net/doc/110x75/60feb6a5c71ceb71893e83bf/ultraschallprfsysteme-2-ingenieur-buchde-2014-12-18-ein-ultraschallprfkopf.jpg)