Embed Size (px)
DESCRIPTION
Easy Demonstration of Measurements: Wireless Transfer of Measurement Values to a Digital Demonstration Display With the Cobra4 Display Connect Set you can transfer completely independent from your location your measurements without difficulties to a Demonstration Display, so that it can be instantly followed by your classroom or auditorium. Just engage the sender unit of the Display Connect between any Cobra4 Sensor Unit and the Cobra4 Mobile Link and insert the receiver into the display. Both sender and receiver are supplied with power via the equipment in which they are connected. For saving the results during a series of measurements just press the start or stop button. The results will be saved in the data logger memory within the Mobile Link and can be instantly read.
Citation preview
www.phywe.comwww.phywe.comCobra4
Product information
Display-Connect Easy demonstration of measurements
Wireless transfer of measurement values to a digital Demonstration Display
With the Cobra4 Display Connect Set you can transfer completely independent from your location your measurements without difficul-ties to a Demonstration Display, so that it can be instantly followed by your classroom or auditorium. Just engage the sender unit of the Display Connect between any Cobra4 Sensor Unit and the Cobra4 Mobile Link and insert the receiver into the display. Both sender and receiver are supplied with power via the equipment in which they are connec-ted. For saving the results during a series of measurements just press the start or stop button. The results will be saved in the data logger memory within the Mobile Link and can be instantly read.
FeaturesEasy transfer of Cobra4 Mobile Link measurements to a digital Demonstrati-on Display
Transfer of measurements to several digital Demonstration Displays possible
Use several sets simultaneously without interrupting each other via 5 selectable radio channels
Easiest handling: after plug on it is ready to use
Didactically demonstrative thanks to the always shown measurement unit
The 56 mm high LED-Display is easily visible even at a greater distance
Product information
Cobra4 Display-Connect TX, sender for the use of Cobra4 Mobile-Link with Demonstration Displays 12623.00
Cobra4 Display-Connect RX, receiver for the use of Cobra4 Mobile-Link with Demonstration Displays 12623.01
Cobra4 Display-Connect, set consisting of sender and receiver for the use of Cobra4 Mobile-Link with Demonstration Displays
12623.88
Digital Demonstration Display, RS232-interface 07157.93
Cobra4 Mobile-Link, incl. rechargeable batteries, SD memory card, USB wire and “measure” software 12620.55
Basic Set consisting of Cobra4 Display-Connect and Demonstration Display
Complete set for the wireless demonstration of measurements, which have been measured with the
Cobra4 Mobile-Link. Each set is delivered in an appealing aluminum case and consists of 1 Cobra4
Display-Connect set, 1 Cobra4 Mobile-Link set, 1 quick charger, 1 digital Demonstration Display, 1
Cobra4 Weather Sensor-Unit, 1 Cobra4 manual.
Cobra4 Display-Connect, Basic Set with digital Demonstration Display, Mobile-link, Weather Sensor delivered with manual in an aluminum case
12607.88
Accessories
For a comfortable stationary work with the Cobra4 Mobile Link you can use a support basis with an angle
of inclination of ca. 30°.
Support basis for Cobra4 12681.00
Products
Combination consisting of sender and receiver for radio-based
communication between a Cobra4Mobile Link and a digital De-
monstration Display with 5 switchable channels with a carrier
frequency of 433 MHz:
Transmission power: 10 mW
Operating distance: withour obstacles ca. 30...40 m
Power supply: via Mobile-Link or rather digital Demonstration Display
Receiver:Connecting socket: 9-pol Sub D plug
Channel switching: via slide switch
Weight: 50 g
Dimensions: 43 x 21 x 112 mm
Sender:Connecting socket: 15-pol Sub D plug
Channel switching: via Mobile-Link software
Weight: 90 g
Dimensions: 69 x 57 x 72 mm
Technical Data
PHYWE Systeme GmbH & Co. KG Robert-Bosch-Breite 10 D-37079 Göttingen
T. +49 (0) 551 604 - 0 F. +49 (0) 551 604 - 107
[email protected] www.phywe.com
07/2009, Copyright by PHYWE Systeme GmbH & Co. KG, subject to alteration, errors and omissions excepted.
00246-02 Succursale belge Grand’Route 79
B-4610 Beyne-HeusayT. +32 (0) 436 162 - 30 F. +32 (0) 436 162 - 48 + 49
[email protected] www.phywe.com
