Enclosures & ComponentsBackplanesSystem PlatformsSwitches, Knobs & LEDsCabinets ATCA Systems Technology Meeting 10.2.2009 CERN Genève

Enclosures & Components Backplanes System Platforms Switches, Knobs & LEDs Cabinets

ATCA Systems

Technology Meeting

10.2.2009CERN

Genève


AdvancedTCA Systems Platformsaccording to PICMG 3.0

currently produced by

Elma Electronic, Inc.44350 Grimmer Blvd.

Fremont, CA 94538, USA


Table of Contents

2U ATCA Systems Platforms• CAP002002• CAP002021• CAP002034

4U ATCA Systems Platforms• CAP001638• CAP002030

5U ATCA Systems Platforms• CAP001476

12U ATCA Systems Platforms• CAP001279• CAP001800• CAP001861

13U ATCA Systems Platforms• CAP002014


ATCA Systems Platform 2U, CAP0020022 slot with RTM, 1 Shelf Manager fix mount, 2 Fan Trays pluggable with 3 Fans each, Air Filter, 1 PSU 115VAC / 250W fix mount Front View


ATCA Systems Platform 2U, CAP0020022 slot with RTM, 1 Shelf Manager fix mount, 2 Fan Trays pluggable with 3 Fans each, Air Filter, 1 PSU 115VAC / 250W fix mountRear View


ATCA Systems Platform 2U, CAP0020212 slot without RTM, 2 Shelf Manager pluggable, 2 Fan Trays pluggable with 4 Fans each, Air Filter, 1 PSU 115VAC / 500W fix mountFront View


ATCA Systems Platform 2U, CAP0020212 slot without RTM, 2 Shelf Manager pluggable, 2 Fan Trays pluggable with 4 Fans each, Air Filter, 1 PSU 115VAC / 500W fix mountRear View


ATCA Systems Platform 2U, CAP0020342 slot with RTM, 1 Shelf Manager fix mount, 2 Fan trays pluggable with 3 Fans each, Air Filter, Dual, redundant -48VDC FeedsFront View


ATCA Systems Platform 2U, CAP0020342 slot with RTM, 1 Shelf Manager fix mount, 2 Fan trays pluggable with 3 Fans each, Air Filter, Dual, redundant -48VDC FeedsRear View


ATCA Systems Platform 4U, CAP0016385 slot with RTM, 1 Shelf Manager fix mount, 1 Fan tray pluggable with 2 Fans, Air Filter, Single -48VDC FeedFront View


ATCA Systems Platform 4U, CAP0016385 slot with RTM, 1 Shelf Manager fix mount, 1 Fan tray pluggable with 2 Fans, Air Filter, Single -48VDC Feed Rear View


ATCA Systems Platform 4U, CAP0020305 slot with RTM, 2 Shelf Managers fix mount, 1 Fan tray pluggable with 2 Fans, Air Filter, Dual, redundant -48VDC FeedsFront View


ATCA Systems Platform 4U, CAP0020305 slot with RTM, 2 Shelf Managers fix mount, 1 Fan tray pluggable with 2 Fans, Air Filter, Dual, redundant -48VDC FeedsRear View


ATCA Systems Platform 5U, CAP0014765 slot with RTM, 1 Shelf Manager fix mount, 1 Fan tray pluggable with 2 Fans, Air Filter, 1 PSU 90-264VAC / 600W, N+1, fix mount Front View


ATCA Systems Platform 5U, CAP0014765 slot with RTM, 1 Shelf Manager fix mount, 1 Fan tray pluggable with 2 Fans, Air Filter, 1 PSU 90-264VAC / 600W, N+1, fix mount Rear View


• Dual Shelf Manager

• Push Pull Fan Configuration

• Filter Tray removable from the Front

• Dual 48V input

• Easy Conversion to AC Version

• Carrying Handles for Lab transportation

5U ATCA with Rear I/O DCA0


Easy removable Fan Tray left and right. No Tools required. Right Fan Tray with integrated Filter. Left side 8 Fans 80mm al the way to the back for rear I/O cooling. Right fan tray 6 Fans 80mm.


•Filter Tray extended to cover Rear I/O Area.

•Removable from the Front. No Tools required.

•Filter Mesh washable fixed with Velcro to the Filter tray.

•Fan Tray stays in Place.


• Two Shelf manager installed on Top of Card cage.

•Easy Removable from the Front trough the convenient ELMA Hot Swap Handle.


• ON/OFF Switch located above left Fan Tray, for easy Start or shut down.

•ESD Jack located in Front for easy plug in. Marked with Yellow Plate to get attention.


• For Easy Transportation additional Carrying Handle on each Side.

•Integrated to stay in the 19 Inch Width.


AC-Version

DC-Version

•DC Version with two Filtered Terminal Blocks including Safety cover.

•DC Hole Arrangement cover with Patch-Panel.

•ESD Jack on the left Top for easy Access. Marked with Yellow Silkscreen Plate to get Attention.

•Grounding Feature with Bridge to connect Logic Ground to Chassis Ground if needed.


•Easy update to AC Version with ELMA AC-Update-Kit, including PSU 1000W and all necessary Components like Fuse holders and Plugs. Assembly provisions and already included in Sheet metal Parts.


Height: 5U 221.4mm

Width Front: 19” 482.6mm

Width Rear: 17.5” 444.5mm

Depth: 16.5” 419.1mm

Overall Depth Flange to Terminal Block

17” 431.8mm


ATCA Systems Platform 12U, CAP00127914 slot with RTM, 1 Shelf Manager fix mount, 1 Fan tray pluggable with 2 Fans, Air Filter, 1 PSU 90-264VAC / 600W, N+1, fix mount Front View


ATCA Systems Platform 12U, CAP00127914 slot with RTM, 1 Shelf Manager fix mount, 1 Fan tray pluggable with 2 Fans, Air Filter, 1 PSU 90-264VAC / 600W, N+1, fix mount Rear View


ATCA Systems Platform 12U, CAP001800 / CAP00186114 slot with RTM, 1 Shelf Manager fix mount, 1 Fan tray pluggable with 2 Fans, Air Filter, 1 PSU 90-264VAC / 600W, N+1, fix mount Front View


ATCA Systems Platform 12U, CAP001800 / 186014 slot with RTM, 1 Shelf Manager fix mount, 1 Fan tray pluggable with 2 Fans, Air Filter, 1 PSU 90-264VAC / 600W, N+1, fix mount Rear View


ATCA Custom Design

-Dust ProtectedATCA System

Proposal for XFEL Tunnel ApplicationDESY Hamburg


Dust Protected

4 U System with 2 Slots 1 Shelfmanager1 Powersupply

Special:Cross flowheat exchanger


Dust Protected

7U ATCA System2 Powersuppliesmin 500 Watts, each1 Shelfmanager5 SlotsSpecial:Cross flow heatexchanger


Dust Protected

Design Features:>Top bottom hinged front door

>Screw mounted frontpanels

> The screws are locked with 90° rotation

> Special design for robot handling

> Total closed cardgage

> Cooling via heat exchanger

> AC Input redundance (7U System)

> Space for a special zone 3 Backplane

> Horizontal Form factor

> Fan Blocks in front and on side of heat exchanger


Laboratory Systems


ATCA CPU Board (Example)

More Details on :www.powerbridge.de


ATCA I/O Carrier

ATCA Carrier Board with four AMC Slots, each Slot with four 10GbE Channels

Supported by:


Documents

Enclosures & ComponentsBackplanesSystem PlatformsSwitches, Knobs & LEDsCabinets ATCA Systems Technology Meeting 10.2.2009 CERN Genève